PERIODICAL SERVICES INCLUDING REPAIR TO PLASTERING, JOINERY, PLUMBING, SANITARY FITTING, ROOFING, FLOORING ETC AT SOUTHERN GARRISON AT SUNDERBANI UNDER GE (N) AKHNOOR

Amount

Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc all as specified and as directed.

Rendering 10mm thick cement plaster with cement mortar (1:6) on fair faces of brickwork or concrete surfaces & finishing the surface even and smooth without using extra cement, complete all as specified and directed.

Rendering 15mm thick in cement mortar (1:4) on fair faces of the brick work or cement concrete surfaces, finishing the surface even and smooth without using extra cement, complete all as specified

Supply only Integral water proofing compound.

Rendering 10mm thick on brick or concrete surface as in chajja/facia/ceiling in cement mortar 1:3 finished even and smooth without using extra cement all as specified.

GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps, cutting and waste in repairs in patches n exc 5 sq. m each, including taking down old and jointing new to old as required all as spd and directed.

Applying two coats of distemper oil emulstion of walls including preparation of new plastered surfaces over one coat of approved primer complete all as specified and directed.

Applying two coats of distemper oil emulsion of ceiling including preparation of new plastered surfaces over one coat of approved primer complete all as specified and directed.

Preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of cement primer complete all as specified and as directed.

Preparation of old painted surfaces with complete removal of existing treatment & applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm on wall complete all as specified and directed.

Preparation of newly plastered surfaces & applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm on wall, complete all as specified and directed. Note for item No-9 & 10:- (i) The work shall be carried out in different shade and the same shall be got approved from Engineer-in-charge/GE/ (ii) The work shall be carried out upto 4th storey of bldgs and no extra payment shall be admissible for necessary form work & scaffolding required for the same.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (Reinforcement cut as required to facilitate demolition) complete all as specified and directed.

Reinforced cement concrete (Nominal mix), type B1, 1:2:4 (using 20 mm graded crushed stone aggregate) as in slabs supported on walls, beams and columns complete all as specified and as directed.

TMT bars, 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally or hooping for column, hooking ends and binding with and including mild steel wire(annealed) not less than 0.90mm dia complete all as specified and as directed.

TMT bars, 6 to 8 mm dia, cut to length, bent to shape required including cranking, bending spirally or hooping for column, hooking ends and binding with and including mild steel wire(annealed) not less than 0.90mm dia, complete all as specified.

Use and waste of form work to soffits of suspended slab such as roof slab, floor slab, landing and similar work not exceeding 200mm thick surface horizontal or sloping, fair finished surface of concrete, complete all as specified .

PCC 1:2:4, B-1 (20mm graded crushed stone aggregate) as in copings, hold fasts, plinth band, bed blocks, benching and like slightly rounded or chamfered angles as directed including necessary form work, complete all as specified.

Preparing old surface (plastered or unplastered) surfaces of walls including cornices, pilasters etc by washing, rubbing, stopping brooming down with steel wire brushing and applying two coats of white wash on walls, complete all as specified.

-Ditto- all as per srl item No 18 here-in-before but on ceiling.

Preparation by washing, rubbing down and stopping of old distempered surfaces and applying one coat of distemper oil emulsion to walls complete all as specified and directed.

Preparing old distempered surfaces incl washing, rubbing down , stopping and applying one coat of plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth thereafter applying two coats of distemper oil emulsion to walls complete all as specified and directed.

Washing, rubbing down and stopping of old distempered surfaces and applying two coat of distemper oil emulsion on wall complete all as specified and directed.

Washing, rubbing down and stopping of distempered/ painted surfaces with preparation of old surfaces and applying one coat of cement base paint to walls complete all as specified and directed.

Preparation of old treated wooden surfaces exceeding 10 cms width or girth and applying one coat of synthetic enamel paint complete all as specified.

Preparation of old painted steel surfaces of any description, over 10cm in width or girth (roof sheet) not otherwise described and applying one coat of synthetic enamel paint, complete all as speciified and directed.

Preparation of old painted steel surfaces of any description, over 10cm in width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as speciified and directed.

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) removing serviceable tiles to store andd rubbish off the premises, complete all as specified.

25 mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) as in sub floor under tiles, all as specified and directed.

Non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular), area of each tile exceeding 0.18 Sqm but not exceeding 0.38 sqm, as in floors, set and jointed in neat cement slurry and pointed in coloured cement laid over & including 15mm thick screed bed or bedding layer in cement mortar 1:4, complete all as specified and directed.

Description all as per srl item no. 29 but as in skirting incl 10mm thick backing coat in cm 1:4 all as directed.

Non skid coloured ceramic tiles 7mm to 8mm thick (square /rectangular) area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces including 15mm thick screed bed/bedding layers in cement and sand mortar 1:4 complete all as specified.

Description all as per Item No. 31 above, but in skirting over and including 10mm thick rendering in CM 1:4.

Glazed ceramic tiles 450 x 300 x 7mm thick / 600 x 300 x 7mm thick (coloured) on vertical surfaces such as skirtings, dados etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10 mm thick rendering in CM 1:4 complete all as specified and directed.

75mm bore PVC SWR Type-B ( pressure not less than 6 kg /cm2) pipes single socket in any length with rubber ring joints laid in trenches or in floors etc., complete all as specified and directed.

Preparation new steel and iron surfaces exceeding 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as speciified and directed.

Taking down shutters of any description exc 1.00 Sqm and not exc 2.00 Sqm each, complete all as specified and directed

Description all as per srl item No 36 above, but exc 2.00 Sqm each

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm and n.exc 4.00 sqm each, complete all as specified and directed.

Description all as per srl item No 38 above, but not exceeding 1.5 sqm.

Factory made solid Panel PVC( door/almirah shutter/cupboard) shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as shown in drawing of relevant item in MES, schedule Part-II , 2020 as specified and as directed.

Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, complete all as shown in drawing of relevant item in MES, schedule Part-II , 2020 as specified and as directed.

100mm butt hinges medium weight cold rolled mild steel, complete all as specified.

Aluminium handle cast type anodised of size 150mm long ISI marked complete all as specified.

Aluminium anodised barrel tower bolt 150mm extruded section ISI marked complete all as specified.

Steel windows/ventilator (Box type) factory made with double shutter with or without devetailed bar ( glass & gauged shutter) of size 79mmx39mm,16 gauge rectangular tubular frame with side hung shutter with glazing bars 12x3mm flat iron incl box type hinges with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts in each shutter 100mm long with & including 8mm square bar grills, complete all as specified & as shown on drg No. CEUZ/TD/1269/2008 Sh No 1/1 to 1/3 . Note:-(a) Fixed type glass panes shutter if any provided in above same window shall be measured and paid separately & area of these fixed shutter shall be deducted from total area of box type window for payment purpose. (b) Sheet glass/ wire cloth shall be measured & paid seperately under respective item

Description all as per Item No 45 above, but only fixed glass pane shutter without glazing bars except grills.

Galvanised steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm, complete all as specified.

Sheet glass ordinary quality, 4mm thick, glazing with oil putty or wooden beads in squares not exceeding 0.50Sqm in each pane, complete all as specified and as directed.

Figured glass pin headed type, 4mm thick, glazing with oil putty or wooden beads in squares not exceeding 0.50Sqm in each pane, complete all as specified.

Hacking out old broken galss (any thickness, size, quality or description) for metal frames including punching or drilling out old glazing pins/spring clips, complete all as specified.

Taking up or down steel water tubing and connections of 20mm bore all as specified and directed.

Taking up or down steel water tubing and connections of 15mm bore all as specified and directed.

Fixing only 15mm bore steel tubing any grade to walls and ceilings .

Mild steel water tubing of 20 mm bore ‘medium grade’ galvanized with all fittings like socket, union, elbow, bend, tees etc fixed to walls and ceilings or laid in floors, complete all as specified and as directed.

Mild steel water tubing of 15 mm bore ‘medium grade’ galvanized with all fittings like socket, union, elbow, bend, tees etc fixed to walls and ceilings or laid in floors, complete all as specified and as directed.

Fixing only 20mm bore steel tubing any grade to walls and ceilings .

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring,etc., and making good, cutting not exc 10 cm girth Stone concrete block or slab walls all as directed.

25 mm dia stainless curtain rod complete with stainless bracket and side caps fixed in position by drilling holes in wall and fixed the bracket with rawl plug and SS screw fixed in repairs, complete all as specified and as directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof covering, all as specified.

Dismantling of asbestos, cement (corrugated, semicorrugated, etc.) sheets in roof coverings , complelet all as specified and directed.

Dismantling wrought iron or mild steel work of any description complete all as specified and directed.

Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed.

Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, valley gutter, ridge & similar works fixed with self tapping screws complete all as specified.

Restraining, resecuring including making good of loose/disturbed GI snap grid ceiling frame work incl carefully taking down ceiling board and refixing/fixing new one in position if required, complete all as specified and directed. Note:-Supply only ceiling board required for replacement if any shall be measured & paid under relevant item.

Dismantling of wall and ceiling boards ( fibre ,pulp, insulation,etc,) or insulation boards/slabs/blankets any thickness,including ceiling framework, complete all as specified.

False ceiling of grid of galvanzed steel tee/ angle (power coated ) of grid size 600x600mm as comprising of main and secondry tee ( weight not less than 240gm /RM) and wall perimeter angle (weight of section not less than 217gm/RM) all around of walls suspended with 4mm GI wire @ 1200mm c/c of ceiling by fasteners of adjustable guide hanger including clips/MS fitments to hold the panels insert of any type including 4mm thick everest designer ceiling boards size 595x595mm fixed in position all as directed.

Supply only 4mm thick prelaminated designer ceiling board of size 595mm x 595mm (excluding framework) complete all as specified and directed.

Demolition of brick work built in cement mortar including all quions, arches , pillars etc.

Brick work with sub class 'B' bricks , straight or curved on plan exc. 6 mtr mean radius built in CM 1:6 complete all as specified and directed.

Walling of random rubble uncoursed, well bonded, bedded and solidly hearted built in CM 1:4 complete all as specified.

Description all as per item No 70 above but except stone.

Rolled mild steel works as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam,tee,angle, channel or flat sections) including distance pieces, cleats etc Fe 410W(Gde E-250), quality 'A' complete all as specified and as directed.

Rolled mild steel sections as in gusset plates (Plain or chequered) channels, square cut or notched (ordinary and counter sunk foring holes, without any attachement conforming to Fe 410-W(Gde E- 250)quality A , complete all as specified and directed.

PVC SWR bends any radius 110 mm bore with oval access door, complete all as specified and as directed.

Preparation of new untreated wood and wood based surfaces of any description, not otherwise described over 10cm width or girth and painting with two coats of synthetic enamel paint over a coat of pink primer all as specified and directed.

Pressed steel frames for doors with one or more rebates of size 125x60mm including necessary fixing lugs, hinges, lock strike plates complete including one shop coat of red oxide primer, providing mild steel 6 mm dia thresh hold bar complete all as specified and as directed.

Pressed steel frames for doors with one or more rebates of size 105x60mm including necessary fixing lugs, hinges, lock strike plates complete including one shop coat of red oxide primer, providing mild steel 6 mm dia thresh hold bar complete all as specified and as directed.

PCC 1:2:4 type B-0 (Using 12.5 mm graded crushed stone aggregate) as in filling of pressed steel frame.and including 50 mm parapet coping all as specified and directed.

PCC 1:3:6 type C-1 (Using 20mm graded crushed stone aggregate) for hold fast blocks, including necessary form work for rough finished surfaces etc complete all as specified and as directed.

35 mm thick Flush shutters, solid core with particle board exterior grade as per IS-2202 of 199 (Part-I). Flush door shutter shall be internally lipped as per clause 8.52.2 of SSR-2009 Part-I complete all as specified and directed.

35mm thick 2nd class hard wood Glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc devided into square with sash bars, edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass etc. size of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified and directed.

35mm thick, 2nd class hard wood plain, framed, panelled factory made shutters (two panel) with lock rail and panel of 12mm veneered particle board with commercial veneering on both faces. The size of rails and styles as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified and directed.

300mm Mild steel ordinary rat tail rod pattern springs including roller and roller plate fixed in repairs, complete all as specified.

Aluminium anodised sliding door bolts with hasp and stapple extruded section or cast aluminium alloy with length of bolt as 300 mm including fixing bolts complete all as specified.

Floor door stopper 140mm overall length of cover plate of aluminium alloy body and tongue,nodised,with hard drawn steel spring,fixed in bottom body of door complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level ) complete all as specified and as directed.

Providing cement concrete type C-1, 1:3:6 ( using 20mm graded crushed stone aggregate), 50 mm thick as in plinth protection laid in bays not exceeding 2 Sqm each and finishing even and fair on top without using extra cement with 6mm wide joints throughout the thickness of plinth protection in concrete bays and in between the walling and plinth protection, filling the joints with mastic filling comprising of one part of heated bitumen 85/25 or 95/10 grade and 3 parts of sand ( all by weight), complete all as specified.

Rotational moulded polyethylene 03 layer water storage tanks of 500 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including taking down existing tank complete all as specified and as directed.

15mm bore Stop valve cast copper alloy screwed down high pressure with crutch or butter-fly handle, screwed both ends for iron pipes or for union, fixed in repairs, complete all as specified.

20mm bore Stop valve cast copper alloy screwed down high pressure with crutch or butter-fly handle, screwed both ends for iron pipes or for union, fixed in repairs, complete all as specified.

Ball valve high pressure PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed of 20mm dia bore, complete all as specified.

PVC valve less, symphonic action type, flushing cistern of capacity 10 liters, low level, white with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length and making connections fixed in repairs, complete all as specified and directed.

Vitreous china squatting pan "Orissa Pattern" size 580 x 440 mm in white colour with integral foot rest incl lime mortor, 'S' trap fixed in repairs complete all as specified and directed. Cat Part No-20042 (ORISSA PAN (ECO)) of Hindware or equivalent cat part of make specified in list make as approved by GE.

Vitreous china wash basin, white, flat back, size 580x435mm including waste fitting chromium plated brass, chromium plated steel chain and rubber plug, porcelain stopper, a pair of CI brackets, waste pipe etc., fixed in repairs complete all as specified and as directed. Cat Part No-10086 of Hindware for Wash basin or its equivalent cat part of make specified in list make as approved by GE.

Vitreous china wash down water closet pan pedestal pattern in white colour with 'P' or 'S' traps excluding seat cover, flushing cistern and flush pipe fixed in repairs complete all as specified and directed. Cat Part No-20011 (SLICK) of Hindware or equivalent cat part of make NEYCER, CERA, PARRYWARE as approved by GE.

PVC connection 15mm size with PTMT nuts on both ends of length 450mm fixed, complete all as specified and directed.

Taking down eaves gutters and rain water pipe , soil and waste pipe (any size or pattern), includding all fittings, heads , shoes bends , swan-necks etc . complete all as specified.

110mm bore PVC SWR Type-B pipes (pressure not less than 6 kg /cm2) single socket in any length with rubber joints laid in floors/trenches etc all as specified and directed.

110 mm dia PVC (SWR) Type-B pipes single socketed in any length with rubber ring joint fixed to wall with PVC//MS holder clamp all as specified and directed.

Description all as srl item No 99 above but 75mm bore

PVC (SWR) 75 mm dia floor trap plain with grating including jointing with solvent cement fixed in repairs, all as specified and directed

S&F in repairs sinks with drainage board made of stainless steel (1mm thick) kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm as approved by Engr-in-Charge complete all as specified and directed.

CP angle valve/concealed stop cock of cast copper alloy (ISI Marked) chromium plated fancy type screwed down high pressure with capstain head screwed both ends for iron pipe 15mm bore including fixing in repairs complete all as specified and directed. Cat Part No-SOL-6053 of Jaquar or its equivalent cat part of make specified in list make, as approved by GE.

Bib taps (Long body) for 15mm bore dia of pipe, fancy type chromium plated with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule and fixed in repairs complete all as specified and directed. Cat Part No-CON-107KN of Jaquar or its equivalent cat part of make specified in list make, as approved by GE.

15mm bore brass CP wall mixer with provision for overhead shower arrangement with 115mm long bend pipe on upper side for mixing hot and cold water supply screwed down with connecting legs CP extension nipple & wall flange connector for hand shower arrangement with connecting Legs, wall Flanges & wall bracket for hand shower for mixing hot or cold water, screwed for iron pipe and fixed in repairs, complete all as specified and directed. Make-SOL-6273UPR of Jaquar or its equivalent cat part of make specified in list make, as approved by GE.

Aluminium door air tight of anodised frame made of size 100mmx45mm of section thickness 1.50mm thick with one or ore rebates including jointing cleats etc for fixing aluminium anodised door shutter fully panelled (two Nos of panels on each shutter) with 5.5mm thick tinted glass shutter rail made of 80mmx45mm of sheet thickness 1.50mm thick (Top, bottom, middle and side rail) single/double leaf side hinge type including necessary jointing /aluminium fillets/glazing bars with rubber gasket with aluminium fillets such as bottom door hydraulic door closer-01 No, aluminium tower bolt 150mm long 01No , aluminium anodised bow handles 300mm 02 Nos fancy type on each shutter mortice locks 6 lever Make-harrison, one on each door, bottom and floor stoppers, all fitting shall be of ISI marked except cleats) sizes of each door shall be as per site requirement complete all as specified and directed.

Aluminium window air tight with glazing bar, with aluminium grills (oranmental type) window shutter style shall be 40mmx19mm, sheet thickness 1.5mm sliding channel 3mm thick of width as required and as directed by Engr-in-Charge of anodised frame made of size 75mmx40mm of section thickness 1.50mm thick, with or without rebate with toughned glass 5mm thick, including rubber beading and gasket and aluminium glazing clips, locking arrangement, aluminium anodised bow handles 75mm 01 No complete all as specified. Note :- All fitting shall be of ISI marked) sizes of each shutter shall be as per site requirement all as specified and directed.

PVC (SWR) 110mm junction single, (Single T) equal or unequal ordinary or inverted with spigot or socket branch with oval access door all as specified and as directed.

PVC (SWR) 75mm junction single, (Single T) equal or unequal ordinary or inverted with spigot or socket branch with oval access door all as specified and as directed.

PVC SWR bends any radius 75mm bore complete all as specified.

Rotational moulded polyethylene water storage tanks of 1000 litres capacity,three layered and white in colour (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including taking down existing tank complete all as specified and directed.

Pillar tap of 15mm bore dia fancy type capstan heads, chromium plated screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.

ABINASHI ENTERPRISES (BID ID -3081419)