AMP for the year 2024-25

Amount

Providing, laying, spreading and compacting stone aggregates of 63mm to 45mm (sixty three millimetre to forty five milimetre) sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN In stages to proper grade and camber, applying and brooming, stone screening binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading il as per MORDTechnical Specification Clause 405. By mechanical meansincluding hauling/carriage of all labour equipment and materials to various location through all modes of transportation in all leads and lifts to the entire satisfaction as per direction of Engineer-in-charge.

Providing, laying, spreading and compacting stone aggregates of 53mm to 22mm (fifty y three millimetre to twenty two milimetre) sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN In stages to proper grade and camber, applying and brooming, stone screening binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading il as per MORDTechnical Specification Clause 405. By mechanical meansincluding hauling/carriage of all labour equipment and materials to various location through all modes of transportation in all leads and lifts to the entire satisfaction as per direction of Engineer-in-charge.

Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg. (zero point seventy to one point zero kilogramme) per square metre using mechanical means as per MORD Technical specification clause 502. Induding hauling/ carriage of all labour equipment and materials to various location through all modes of transportation in all leads and lifts to the entire satisfaction as per direction of Engineer-in-charge.

Providing and applying tack coat with bitumen emulsion (RS-1) using emulation distributer at the rate of 0.25 to 0.30 kg ( zero point twenty five to zero point thirty kilogram) per sqm on the prepared dry and hungry bituminous surface cleaned with hydraulic broom as per technical specification clause 503 and as per direction and entire satisfaction of Engineer –in- Charge with in all leads .lifts and carriage of materials and other incidentals .

Providing and applying bituminous concrete 100-120 TPH Batch type hot mix plant 90.26 producing an average output of 40-60 tonner per hour using crusher stone aggregate of control to the required grade level and alignment rolling with smooth wheeled vibratory and tandens roller to achieve the desired compaction as per MORTH specification clause 509 Complete in all respec

CHIRAG SHARMA