Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹48.5 L
EMD Value
₹48,500
Closing Date
25 Nov 2026, 6:00 pm2d left
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Office Of The Executive Engineer, C.P. No.4, Block No.3, E-2 Wing, 5th Floor, Karmyogi Bhavan, Sector-10/A , Gandhinagar.
Construction of Different Category Quarters in Various Sectors at Gandhinagar . (Drilling bore hole at J type Quarters-392 Units site)
366255
17 of 2026-27
Open
Civil - All
Works
Gandhinagar
7 documents required · 7 mandatory
₹1,500
Executive Engineer, Capital Project Div. No.4, Gandhinagar
₹48,500
17 Nov 2026
17 Nov 2026
17 Nov 2026
25 Nov 2026
17 Nov 2026
90 days
Name of work : Construction of Different Categary Quarters in Various Sectors at Gandhinagar
(Drilling bore hole at J type Quarters-392Units site)
Item Quantity Unit Amount
1 Drilling pilot borehole of size 250/300 mm at above site by mud flush direct rotery rig. 900.00 Rmt 573.68
2 Reaming of 250/300 mm dia.Pilot borehole to size 550 mm dia. Incliding assembling 900.00 Rmt 349.46
,lowering housing ,casing strainerpipers with gravel packing and clayball packing etc.
3 Development of cach water bearingzone coming across the full depth of tubewell by lowering 3.00 Job 27191.22
100 mm dia.Droplineand 32 mm dia airline for each water bearing Zone with suitabale
capacity air compressar up to avilability of sand free discharge.
4 900 CFM /200 PSI capacity air compressar upto the availability of sand free discharge for 3.00 Job 27603.30
5 Supply of M.S. E.R.W. plain end medium duty pipe confirming to IS 4270/2001 with latest 900.00 Rmt 3605.70
amendments Of size 250 mm dia
6 Screen Slotting of MS ERW balnce pipe with size of slot 6.75 cm X 6.35 cm X 3.12 mm for 366960.00 slots 0.24
250 mm dia pipe
7 Supply of miscellenious bore material suitable to 250 mm dia pipes as following (A) MS Bore 3.00 Pair 2037.91
clamps made from M.S. plate with 3 holes on either side with nuts & bolts of std make of size
900X100X16 mm flat suitable for 250 mm dia pipe.
8 Supply of miscellenious bore material suitable to 250 mm dia pipes as following (B) MS Bore 3.00 No 1161.62
Plug having 100mm height made from M.S. plate with 3 holes at equal distance on
circumferrence for nut-bolts type, locking arrrangement with nuts-bolts & lock nuts of std
make complete from 5 mm thick M.S. plate suitable for 250mm dia pipe.
9 Supply of miscellenious bore material suitable to 250 mm dia pipes as following (C) MS Bail 3.00 No 1065.02
Plug having length 0.45 mtr from medium class pipe as per I.S. suitable for 250 mm dia pipe.
10 Supply of miscellenious bore material suitable to 250 mm dia pipes as following (D) Steel 900.00 NO 91.71
bent plate suitable for ERW pipe for 250mm dia (size:200 X 150X6 mm)
11 Supply of GRAVEL OF selected size 4 mm to 6mm 150.00 Cum 2049.29
12 Electrologging of Pilot bore hole with carting. 3.00 Job 18180.00
13 Geohydrological ground water investigation including vehicle charges for three phase DTH 3.00 No 14428.86
bore/DR tube well including water sample testing & chemical analysis
Item Quantity Unit Amount
14 Providing, supplying and commissioning ISI mark CI D/F Reflux Valves of following class and 3.00 No 5401.48
diameter including all taxes, insurance, transportation, freight charges, octroi, inspection
charges, loading, unloading, conveyance to departmental stores stacking etc. complete.
Reflux valves PN 1 IS 5312 with ISI mark size: 100 mm
I/We am/are willing to carry out the work at………………….% above/below percent(Should be written in figures and words) of the estimated rate mentioned above. Amount
Tender works out as under. Estimated amount put to tender
Estimated amount put to tender Add………% Above
Deduct………% below Net
1 The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra payment shall be made.
2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.
3 Income tax TDS will be deducted at a source while making payments of bills
In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement Consumption/16/C Date:11/05/2017
as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost of difference of cement consumption have been deducted from
4 the rate of original item at the rate of input rate mentioned in all the tender.
Deputy Executive Engineer Executive Engineer
Capital Project Sub Division No.17 Capital Project Division No.4
Gandhinagar Gandhinagar
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
GRs Buildings.pdf
J type Drilling Bore BOQ.pdf
NIT Drilling Bore J Type.pdf
SBD Drilling Bore J Type.pdf
Specification Booklet-1 (1).pdf
Specification Booklet-2 (1).pdf
Specification Booklet-3 (1).pdf
Specification Booklet-4 (1).pdf
Specification Booklet-5 (1).pdf
Specification Booklet-6 (1).pdf
Specification Booklet-7 (1).pdf
Specification Booklet-8 (1).pdf
Specification Booklet-9 (1).pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .