Additional alteration to Paraclinic building in at Dr. R.P. Govt. Medical College at Tanda in Distt. Kangra (H.P.) (Deposit Work)

Amount

Demolition of brick work above G.L. upto floor two level including stacking of serviceable materials and disposal of un-serviceable materials within 20 metres (Twenty metres) lead in cement mortar complete and as per direction of Engineer-in-charge, including carriage of materials within all leads, lifts and other incidentals.

Second class brick work using common brunt clay buildings in super-structure with cement mortar 1:6 (One cement: Six sand) as per approved drawing, design complete as per direction of Engineer- Incharge, including entire carriage of materials within all leads, lifts and other incidentals.

Second Class half brick masonry in common burnt clay building bricks in Cement Mortar 1:4 (1 cement:4 sand) complete as per direction of Engineer- Incharge, including entire carriage of materials within all leads, lifts and other incidentals.

Providing and fixing anodised aluminium work for door, windows, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazinge/ panelling C.P. brass/stainless steel screws for doors windows and ventilatiors and glazed partitions frames all complete as per architectural drawings and as per direction of Engineer-in-charge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing anodised aluminium work for door, windows, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazinge/ panelling C.P. brass/stainless steel screws for shutters of doors windows & ventilators including providing and fixing hinges/pivots and making provisions for fixing of fittings where ever required including the cost of PVC/neoprene gaskets as required (fittings and glazing/panelling shall be paid for separately) all complete and as per direction of Engineer- Incharge, including entire carriage of material within all leads, lifts and other incidentals.

Providing and fixing aluminium sheet 1mm (One milimetres) thick in expension joints vertically fixed with screws or nails complete and as per direction of Engineer- Incharge, including entire carriage of material within all leads, lifts and other incidentals.

Providing and laying duro stone vetrified tiles 300x300mmx8mm (Three hundred into three hundred into eight milimetres) in grey/coloured of required shade in skirting risers of steps and dados on 12mm (Elevel milimters) thick cement mortar 1:3 (1 cement : 3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete and as per directed by the Engineer- Incharge, including entire carriage of material within all leads, lifts and other incidentals.

Providing and fixing 12mm (Twelve millimetres) thick prelaminated board both side bwp phenol bonded exterior/interior grade panelled shutters including bright finished/black enamelled iron butt hinges with necessary screws complete and as per direction of Engineer- Incharge, including entire carriage of material within all leads, lifts and other incidentals.

Providing and laying cement concrete work 1:2:4 ( one cement isto two sand isto four graded stone aggregate 20mm ( twenty millimetres ) nominal size and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in suspended floor roof , landing and shelves and their support balcones , beams , girders, bressumers and contilever upto floor two level complete and as per direction of Engineer-in-charge, including carriage of materials within all leads, lifts and other incidentals.

Providing Tor steel reinforcement for R.C.C. work including bending, binding and placing in position complete and as per direction of Engineer-in-charge, including carriage of materials within all leads, lifts and other incidentals.

Providing form work with steel plates 3.15mm ( Three decimal one five millimetres ) thick welded with angle iron in frame 30x30x5mm ( Thirty millimetres into thirty millimetres into five millimetres ) so as to give a fair finish including centring , shuttering , strutting and propping etc . with wooden battens and ballies , height of propping and centring below supporting floor to ceiling not exceeding 4 mtrs. ( four metres) and removal of the same for insitu- reinforced concrete & plain concrete work in Flat surfaces such as soffits of suspended floors, roofs, landings and the like complete and as per direction of Engineer-in-charge, including carriage of materials within all leads, lifts and other incidentals.

15mm cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto floor two level including arrises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm in girth and finished even and smooth cement mortar 1:6 (1 cement : 6 sand) complete and as per direction of Engineer-in-charge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 100mm (One hundred milimetres) nominal size aluminium handles anodized transparent or dyed to required colour & shade with necessary screws etc. complete and as per direction of Engineer-in-charge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 100mm (One hundred millimetres) size bright finished brass rim latch and lock a pair of knobs with necessary screws etc. complete (indian make of approved quality) complete and as per direction of Engineer-in-charge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 300x10mm (Three hundred into sixteen millimetres) nominal size aluminium tower bolts (berrel type) anodized trans parent or dyed to required shade and colour with screws etc. complete and as per direction of Engineer-in-charge, including carriage of materials within all leads, lifts and other incidentals.

Providing fixing bright finished brass tower bolts (barrel type) with screws etc. complete and as per direction of Engineer-in-charge, including carriage of materials within all leads, lifts and other incidentals.

150x10 mm (One hundred fifty into ten milimetres)

100 x 10 mm (One hundred into ten milimetres)

White glazed tiles 6mm thick in flooring, treads of steps and landing laid on a bed of 12mm (Twelve milimetres) thick cement mortar 1:3 (One cement :Three sand) 30x60cm (Thirty into sixty centimetres) thick Somany, Kajaria or Cera make finished with flush pointing in white cement complete and as per direction of Engineer-in-charge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 10mm thick anti skid water proof stain and impect resistent heavy duty vetrified tiles Nitco or equivalant 600x600mmx10mm manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1 cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete and as per direction of Engineer-in-charge, including carriage of materials within all leads, lifts and other incidentals.

Providing and laying 100mm (One hundred millmetres) dia on wall face PVC (D-Plast) rain water working pressure not less than 4.50 kg/sqm (Four decimal Five Zero kilograms per square metre)including filling the joints with approved adhesive complete and as per direction of Engineer-in-charge, including carriage of materials within all leads, lifts and other incidentals..

Providing and fixing PVC plain bend 100mm (One hundred millimetres) dia on wall face P.V.C. acessories for rain water pipes 4.50 kgs/sqm (Four point five zero kilograms per square metre) working pressure class B PVC D-Plast ISI mark of SFMC/Finolex/Relpipe(Reliance) or its equivalent high denesity pipe for rain water pipe fixed with approved adhesive including filling the joints complete and as per direction of Engineer-in-charge, including carriage of materials within all leads, lifts and other incidentals.

Dismantling tiled floors laid in mortar upto floor two level including stacking of serviceable materials and disposal of un-serviceable materials within 20 (Twenty) metres lead (wooden/concrete joists to be measured and paid for Separately) For thickness of tiles above 25mm (Twenty five milimetres) and upto 40mm (Forty milimetres) complete and as per direction of Engineer-in-charge, including carriage of materials within all leads, lifts and other incidentals.

Providing and laying 10mm (Ten milimetres) thick acid proof tiles of size upto 300 x 300mm (Three hundred into three hundred milimetres) of specified shade in floors, treads of steps and landing laid on a bed of 12mm (Twelev milimetres) thick cement mortar 1:3 (1 cement: 3 sand) jointing with cement slurry mixed with pigment to match the shade of tiles complete and as per direction of Engineer-in-charge, including carriage of materials within all leads, lifts and other incidentals.

Removing dry or oil bound distemper by washing and scraping and sand papering the wall surface smooth including necessary repairs to scratches complete and as per direction of Engineer-in-charge, including carriage of materials within all leads, lifts and other incidentals.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete and as per direction of Engineer-in-charge, including carriage of materials within all leads, lifts and other incidentals.

Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surfaces to give an even shade including thoroughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth including applying of putty as required for making the surface complete and as per direction of Engineer-in-charge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing catcher for cup cupboard etc. complete and as per direction of Engineer-in-charge, including carriage of materials within all leads, lifts and other incidentals.

Kota stone slab 20 mm (Twenty milimetres) thick in risers of steps, skirting dado and pillars laid on 12 mm (Twelve milimetres) (average) thick cement mortar 1:3 (1 cement :3 sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing complete as per approved drawing design complete and as per direction of Engineer-in-charge, including carriage of materials within all leads, lifts and other incidentals.

Providing and laying 15mm (Fifteen millimeters) thick granite stone in flooring 20mm (Twenty millimeters) (average) thickness base of cement mortar 1:3 (One cement : Three sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete and as per direction of Engineer-in-charge, including carriage of materials within all leads, lifts and other incidentals.

Supplying and fixing 4mm (Four millimetres) thick plain plass panes with putty and nails including removal of broken glass panes wherever necessary complete as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Supplying and fixing 5.5mm (Five point five millimetres) thick plain glass panes with putty and nails including removal of broken glass panes wherever necessary complete as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing to wall, ceiling and floor galvanised mild steel tubes (heavy grade) 15mm (Fifteen milimetres) diametres including all tube fitting such as nipples, elbows, unions, tees and clamps including making good the wall, ceiling and floors complete and as per direction of Engineer-in-charge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing to wall ceiling and floor galvanised mild steel tubes (heavy grade) 20mm (Twenty milimetres) diametres including all tube fitting such as nipples, elbows, unions, tees and clamps including making good the wall, ceiling and floors complete and as per direction of Engineer-in-charge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 600x450x150mm ( Six hundred into four hundred fifty into one hundred fifty ) Labouratory sink with C.I. Or M.S Brackets painted white including cutting holes in walls of Hindware/Cera/Jaquar star white/Snow white and making good the same but excluding fitting complete and as per direction of Engineer-in-charge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 32mm (Thirty two millimetres) diametres C.P. brass waste of continental for wash basin or sink including brass check nut complete and as per direction of Engineer-in-charge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 32mm (Thirty two millimetres) diametres M.I. union for wash basin or sink Hindware/Cera/ Jaquar of star white complete and as per direction of Engineer-in-charge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing flat back 550mmx400mm (Five hundred fifty milimetre into Four hundred milimetre) vitreous china wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making god the same but excluding fittings complete and as per direction of Engineer-in-charge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 100mm (One hundred milimetres) diametres C.P brass grating for gully floor or Nahni trap ISI make complete and as per direction of Engineer-in-charge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 600x450mm (Six hundred into Four hundred fifty milimetres) size bevelled edge mirror of superior glass mounted on 6mm thick A.C. Sheet or plywood sheet and fixed to wooden plugs with C.P. Brass screws and washers complete and as per direction of Engineer-in-charge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 15mm (Fifteen milimetres) diameters long nose brass bib tap (Superior or heavy type) Cera or its equivalent complete and as per direction of Engineer-in-charge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 15mm (Fifteen milimetres) dia long body brass bib tap (Superior or heavy type) Cera or its equivalent complete and as per direction of Engineer-in-charge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing vitreous China wash down, water closet (European type. W.C. pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe Cera or its equivalent in cement mortar 1:1 (One cement : One sand) Angle Indian Universal closet (Seat and over to be measured and paid for separately complete and as per direction of Engineer-in-charge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing plastic seat (Solid/Hollow type) and cover Cera or its equivalent for wash down water closet with C.P. Brass hinges and rubber buffers complete and as per direction of Engineer-in-charge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing vitreous china water closet squatting pan (Indian type W.C. pan) size 580mm (Five hundred eighty millimeters) Cera or its equivalent (earth work, bed concrete, foot rest and trap to be measured and paid for separately) complete and as per direction of Engineer-in-charge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing chromium plated brass soap dish with C.P. brass brackets fixed to wooden cleats with C.P. brass screws Cera or its equivalent complete and as per direction of Engineer-in-charge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing PTMT Coloured/white high density polyethylene / poly propylene 10.00 ltrs (Ten litres) capacity (full flush) European standard control low level flushing cistern with fittings with a pair of brackets with fittings such as lead valve, syphon, 15mm (Fifteen millimetres) nominal size PVC ball valve with polythene float, with push button, couplings for connections with inlet, outlet and over flow pipe, 40mm (Forty millimetres) dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately) complete and as per direction of Engineer-in-charge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 15mm (Fifteen milimetres) C.P. brass angle valve without nuts and pipe Cera or its equivalent complete and as per direction of Engineer-in-charge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing P.V.C. connection 300x450mm (Three hundred into four hundred fifty millimetres) length with check nut and brass union complete and as per direction of Engineer-in-charge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 75mm (Seventy five milimetres) diametres PVC door bend with oval access door, insertion rubber washer 3mm (Three millimetres) thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete and as per direction of Engineer-in-charge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 75mm (Seventy five milimetres) dia pipes on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5 kg/sqm including filling the joints with approved adhesive complete. complete and as per direction of Engineer-in-charge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing PVC 100mm (Hundred milimetres) size Cera or its equivalent P or S traps for water closet (squatting pan) including jointing the trap with pan and soil pipe in cement mortar 1:1 (one cement: one sand) complete and as per direction of Engineer-in-charge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing three way Laboratory metal cock of Stainless steel including all fitting accessories complete and as per direction of Engineer-in-charge, including carriage of materials within all leads, lifts and other incidentals.

Bhag Singh

SUKH SAGAR