Face lifting Upgradation of Divisional Office/Sub Divisional office of KPDCL Budgam

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5 mm size,with top and bottom rail of T-iron 40x40x6mm, with 40mm dia, steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer

P/F of 19mm thick water proof ply for cabins with 1 mm teak marine inside /outside incl all fittings fixtures measured surface area as per EIC

Dismantling doors, windows and clerestory windows (steel or wood shutter including chowkhats, architrave, holdfasts etc. complete stacking within 50 meters lead Of area of 3 sqm. and below

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material \within 50 meters lead as per direction of Engineer-in-charge

supply fixing placing of 10mm ply wood incl painting fixtures fitting over existing soffits and scafolding costs

Providing and laying in position cement concrete of specified grade including curing but 1;3;6 excluding the cost of centring and shuttering. All work upto plinth

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) counter slab

Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platforms

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level vide item above

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 11.3.1 25mm thick with 12.5 mm nominal size stone aggregate.

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete 2mm thick Corridor 2x11x2.75+2x2.5x2.75= 74.25 sqm

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :1:4

12 mm thick cement plaster in 1:4 mix

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete 11.52.1 Size of tile 600x600m m bath room

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Granite Work in Floors :- Providing and fixing ( gang saw cut mirror polished (flamed , pre-moulded and pre-polished), machine cut for flooring, steps ,risers of stairs etc. ( flamed instaircase) of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding (of edges wherever required ) and polishing to edge to give high gloss finish etc. complete at all levels. Granite of any colour and shape 18mm thick. and slab area over 0.50 sq m

P/F of imported laminated wooden flooring of 8-10 mm thick of type AC4 ( green ply or of any standard qlty )incl laying of 2mm foam underneath with all necessary fixtures cornice beeding lipping complete job

P/F of imported laminated wooden wall panelling glossy type (piano or of any std qlty) with required ply wood 12 mm frame work with all necessary fixtures cornice beeding lipping complete

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 MM SAND cast iron P or S Trap,10 liter low levelwhite P.V.C Flushing Cistern,including flush pipe,with manually controlled device(handle Lever),with all fittings and fixtures complete,including cutting and making good the walls and floors wherever required. White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete 19.2.1.3 PN-16 pipe , 25mm OD(SDR-7.4

Providing and fixing PPR Unions 19.2A.2 PPR Union 25mm

Providing and fixing 15 mm nominal bore C.P. brass angle valve forbasin mixer and geyser points of approved make conforming to IS : 8931

Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved 1.2x2.5x10

p/f of 100 mm dia pvc pipes type B incl all fittings and joints

p/f of 75 mm dia pvc pipes type B incl all fittings and joints

Engagement of unskilled labours for removing of rubbish materials from permises of Electric bld

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, Pedestal,cutting and making good the walls wherever required:- White Vitreous China Wash basin incl. all fixing charges complete floors wherever requir

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints withcoarse sand etc. all complete as per direction of Engineer-in-charge

supply fixing of wall paper incl adhesive and binding on even surface 25x10

supply installation of water gyser 50ltr cap of stnd qlty

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : First class kail wood 35mm Thick

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 610x460mm bowl depth 200mm

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 (15 mm nominal bore).

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete

Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : 18.7.1 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in charge. 22.2.1 Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side.

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285 Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15) 3x10+5x8= 70rft @0.72kg

Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in-charge. (Cost of aluminum snap beading shall be paid in basic item.) 22.3.1 With floating glass panes of 4.0 mm

Supply fixing of popular wood in truss work framing etc incl all costs complete job

supply commisioning of LED concealed lights 12 watt incl proper required wiring switches 2/3 way complete job as per directions of EIC

supply installation of 1.5 ton AC of approved brand incl c/o trnsformer with required fittings and fixtures complete job

carriage of materilas by MT

Stone agg lead of 10 km

sand lead of 20 km

bricks lead of 5 km