Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.5 LAccepted-Finance A R AND M O ON VARIOUS ROAD IN SECTION NALAGARH 1 UNDER NALAGARH SUB DIVISION SH HIRING OF JCB | ₹3.5 L | L1 | Accepted-Finance L1 |
| 2 | L2₹3.7 LAccepted-Finance VILLAGE P O AMARPUR TEHSIL GHUMARWIN DISTT BILASPUR H P | BILASPUR | HIMACHAL PRADESH | 174001 | ₹3.7 L | L2 | Accepted-Finance L2 |
| 3 | L3₹3.8 LAccepted-Finance HIMACHAL PRADESH | SHIMLA | HIMACHAL PRADESH | 171002 | ₹3.8 L | L3 | Accepted-Finance L3 |
| Sl No | Description | Qty | Unit | Manoj Kumar L1 | Manohar Lal L2 | Shyam Lal L3 |
|---|---|---|---|---|---|---|
| 1.00 | Removal of slips in all kind of soil including saturated soil but excluding boulders and rock portion required blasting upto a distance of 20mtrw disposing of unserviceable material stacking serviceablematerial complete in all respect and to the entire satisfaction of the Engineer-in-charge | 267.8 | Cum | 300 ₹80,340 | 320 ₹85,696 | 310 ₹83,018 |
| 2.00 | Excavation in foundation and trenches etc. (for pipe and pits) up to all depths and in all kinds of soils such as pick work, pick jumper work, saturated soil including bailing or pumping out of water, blasting in soft/hard rock, chiseling/wedging out of rock where blasting is prohibited, in all leads and lifts including trimming and dressing of sides, leveling of beds to correct grade including shoring, strutting, planking timbering and dewatering wherever required, stacking usable and unusable materials/ soils separately and after laying, jointing and testing of pipes, returning the usable soils in 15 cm layers by ramming and watering and then disposing of all surplus excavated soil/unusable materials as directed within all leads and lifts including restoration of un-metalled surfaces to its original condition and including cost of diversion of traffic, night signal boards, fixing caution boards, crossing over trenches for access to houses, fencing etc. complete in all respects within all leads and lifts as per the direction of the Engineer-in-charge | - | - | - | - | - |
| 2.01 | Pick Jumper work | 79.2 | Cum | 400 ₹31,680 | 410 ₹32,472 | 430 ₹34,056 |
| 2.02 | Pick work | 64.68 | Cum | 340 ₹21,991.2 | 350 ₹22,638 | 380 ₹24,578.4 |
| 3.00 | Laying. Jointing and testing galvanized mild steel tube in trenches of following dia, including tube fittings such as bends, tees, reducers, unions etc, complete and to the entire satisfaction of the Engineer-in-charge (earth work in trenches to be measured and paid for separately). | - | - | - | - | - |
| 3.01 | 65 mm dia | 80 | Rmt | 80 ₹6,400 | 85 ₹6,800 | 120 ₹9,600 |
| 3.02 | 100 mm dia | 100 | Rmt | 100 ₹10,000 | 110 ₹11,000 | 130 ₹13,000 |
| 3.03 | 125 mm dia | 60 | Rmt | 120 ₹7,200 | 130 ₹7,800 | 140 ₹8,400 |
| 4.00 | Dismentalled of GMS pipe from trenches (earth work in trenches to be measured and paid for separately) and to the enitre satisfaction of the Engineer-in-charge. | - | - | - | - | - |
| 4.01 | 65 mm dia | 80 | Rmt | 65 ₹5,200 | 70 ₹5,600 | 85 ₹6,800 |
Tender Value
Refer Docs
EMD Value
₹6,530
Closing Date
13 Mar 2026, 3:00 pmClosed
EE JSV Division Jagatkhana
EE JSV Division Jagatkhana
(SH Repair/providing laying jointing and testing of GMS pipe 80 mm dia 100 mm dia and 125 mm dia and dismentalling relaying and jointing of GI pipe 125 mm dia 100 mm dia at various location or RDs)
2026_HPIPH_130258_1
NIT 16685-16784 Dated 02.03.2026
Open Tender
Repair and Maintenance Works
60 days
Bassi
Please refer Tender documents.
3 documents required · 3 mandatory
₹500
Yes
₹6,530
Yes
8 Apr 2026
3 Mar 2026
13 Mar 2026
3 Mar 2026
13 Mar 2026
3 Mar 2026
Removal of slips in all kind of soil including saturated soil but excluding boulders and rock portion required blasting upto a distance of 20mtrw disposing of unserviceable material stacking serviceablematerial complete in all respect and to the entire satisfaction of the Engineer-in-charge
Excavation in foundation and trenches etc. (for pipe and pits) up to all depths and in all kinds of soils such as pick work, pick jumper work, saturated soil including bailing or pumping out of water, blasting in soft/hard rock, chiseling/wedging out of rock where blasting is prohibited, in all leads and lifts including trimming and dressing of sides, leveling of beds to correct grade including shoring, strutting, planking timbering and dewatering wherever required, stacking usable and unusable materials/ soils separately and after laying, jointing and testing of pipes, returning the usable soils in 15 cm layers by ramming and watering and then disposing of all surplus excavated soil/unusable materials as directed within all leads and lifts including restoration of un-metalled surfaces to its original condition and including cost of diversion of traffic, night signal boards, fixing caution boards, crossing over trenches for access to houses, fencing etc. complete in all respects within all leads and lifts as per the direction of the Engineer-in-charge
Pick Jumper work
Pick work
Laying. Jointing and testing galvanized mild steel tube in trenches of following dia, including tube fittings such as bends, tees, reducers, unions etc, complete and to the entire satisfaction of the Engineer-in-charge (earth work in trenches to be measured and paid for separately).
65 mm dia
100 mm dia
125 mm dia
Dismentalled of GMS pipe from trenches (earth work in trenches to be measured and paid for separately) and to the enitre satisfaction of the Engineer-in-charge.
65 mm dia
100 mm dia
125 mm dia
Re-laying, Jointing and testing galvanized mild steel tube in trenches of following dia including tube fittings such as bends, tees, reducers, unions etc. complete and to the entire satisfaction of the Engineer-in-charge (earth work in trenches to be measured and paid for separately)
65 mm dia
100 mm dia
125 mm dia
Providing and flaying flanged CI/DI standard special such as tees, bends, collars, tappers, caps etc suitable for flanged jointing as per IS: 1538 upto 300mm dia and over 300mm dia
200mm dia bend 22.5 degree 1No 54kg
Providing of rubber gasket rings of apporved quality for 200mm dia ductile iron (DI) piopes siable for push on joints made of EPOM/SBR rubber conforming to IS: 5382 including all leads and lifts loading unloading, transportaton and complee and to the entire satisfaction of the Engineer-in-charge.
Providing circumferential butt welded joints at various RD's/ locations by electrical arc welding to the various dia GI/MSERW pipe as per conforming to IS: 3183-2007 (latest upto date amendements of grade and wall thickness as specified below welded in requisite number of weld runs so as to achieve the minimum effective throat thickness of weld conforming to IS: 816-1969 specifications by using welding electrodes of 2.5mm to 6.3mm of Advani Orelon (Adore)-CITOJET/ESAB make, conforming to IS: 814-1991 at site of work complete in all respect, including manual mechanical handling of pipe in all leads and lifts and to the entire satisfaction of the Engineer-in-charge
65 mm dia
80 mm dia
100 mm dia
125mm dia
150 mm dia DI pipe
Providing and fixing cast iron sluice valve of following dia of Leader/Kirloksar/ make and acpable with standing normal seat pressure of 10.20kg/cm2 class PN-1.00 as per IS: 780-1984 in all leads and lifts and to the entire satisfaction of the Engineer-in-charge.
65 mm dia
80 mm dia
100 mm dia
stage.html
html • 0.04 MB
technical_192606.pdf
techsummary_192606.pdf
finance_192606.pdf
BOQ Comparative Chart
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.43 MB
BOQ_192606.xls
BOQ • 0.26 MB
TC.pdf
Tender Documents • 0.36 MB
PWD8.pdf
Tender Documents • 1.31 MB
PWD6.pdf
Tender Documents • 0.64 MB
Download all tender documents and submit your bid