CA NO. CWE BLY / GE(W) /55 OF 2022-2023 SPL REPAIRS TO BLDG NO T-26 AT GHARIYA LINES OF JRC AND SPL REPAIR TO BLDG NO P-103/A TO P-103/G (OR MD ACCN) OF PRO UNIT AT LOKHART LINE UNDER GE(W) BAREILLY

Amount

M&L for non-skid ceremic coloured tiles 7 to 8mm (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) for laying floor finishes even and rough with and including dimantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing the rubbish off the premises complete all as specified or as directed.

M&L for non-skid ceremic coloured tiles 7 to 8mm (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20mm thick screed bed or bedding layer in cement mortar (1:6) for laying floor finishes even and rough with and including dimantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing the rubbish off the premises complete all as specified or as directed.

All as per serial item 1.00 above but as in vertical surfaces over and including rendering 10 mm thick in cement mortar 1:4 as in backing layer complete all as specified and directed.

M & L for non- skid ceremic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes even and rough with and including dimantling floor, hearth or wall tiling including cement mortar bedding (but not backin) and including removing the rubbish off the premises complete as specified and directed.

M & L for non- skid ceremic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes even and rough with and including dimantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and including removing the rubbish off the premises complete as specified and directed.

M & L for non- skid ceremic coloured tiles 7 to 8 mm thick (Square / rectangular) area of each tile in vertical surface as skirting 400 x 100 x 7 mm to 8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick cement mortar 1:4 cement and dismantling of wall tile including cement mortar bedding complete all as specified or as directed.

M & L for colour glazed ceremic coloured tiles in vertical surface 300 x 600 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick screed bed or bedding layer of cement mortar 1:4 cement and dismantling of wall tile including cement mortar bedding complete all as specified or as directed.

Taking down Chowkats or frames with shutters (Without taking off shutters from the frames) not exceeding 1.5 Sqm each including iron mongries, hold fast etc and including making good disturbed portions of walls in CM 1:4 complete all as specified and directed.

S & F for steel ventilators with top fixed type, with glazing bars complete welded including one soap coat of Red Oxide Zinc chromate primer complete all as specified and directed. Note:- Glass shall be measured and paid for separately.

Taking down Chowkats or frames with shutters (Without taking off shutters from the frames) exceeding 1.5 sqm but not exceeding 4.0 Sqm each including iron mongries, hold fast etc and including making good disturbed portions of walls in Cm 1:4 complete all as specified and directed.

S & F 125 mm X 60 mm X 2mm size pressed steel frames for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of red oxide primer including cutting holes and making good in PCC 1:2:4 type B-1 using 20 mm graded stone aggregate complete all as specified and as directed. Note : 10mm deformed bar shall be provided in bottom portion in each frame. The rate for the same is included in rate quoted against this item.

S&F105x60mmx2mm thick pressed steel, frames for door with one or more rebates including necessary fixing lugs, hinges,lock strike plate, etc, complete all as specified and directed.

S & F factory made 40 mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S & F for 35 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S&F mild steel spring for doors 300 mm long, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F 300 mm long aluminium aloy, anodised sliding door bolts, bolt or clip type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specifie

M&L for 150 mm long mild steel pressed handles, oval type, stove enamelled black complete all as specified and directed.

M&L for 125 mm long mild steel pressed handles, oval type, stove enamelled black complete all as specified and directed.

S&F 140 mm floor door stopper of aluminium alloy body and tongue , anodised ,with hard drawn steel spring ,fixed in floor complete all as specified and directed.

S&F, 200 mm long aluminium anodised barrel barrel tower bolts of extruded section and fixed as specified and as directed.

S&F 100 mm stainless steel butt hinges medium weight steel hinge pin, bright polished and fixed complete all as specified and directed.

S&F 75 mm stainless steel but hinges medium wt steel hinge pin, bright polished and fixed complete all as specified and directed.

S&F, 125 mm aluminium handles cast type, anodised complete all as specified and as directed.

M & L preparing wood or wood based surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F 25mm dia decorative curtain rods of any pattern, design & colour with end fittings and brackets complete all as specified and directed.

S&F steel windows with pressed steel frame (size 95x45x1.25mm) side hung shutter including box type hinges with steel handle, and steel peg stay complete with glazed openable shutter with glazing bar(open out side) and wire gauged openable shutter without glazing bar(open inside), dovetailed or welded complete all as specified and directed and all as per Drg No TD/088 dt 07 Jan 2002 NOTE :- (i) Two shutter ie wire gauged and glazed shall be fixed in one composite frame and both shutter shall be measured as one unit. (ii) Rate for filling of PCC in frame deemed to be included in quoted rate. (iii) MS grill shall be measured and paid separatly under relevant item of schedule

S&F framed work such as grills, gratings, steel post and struts in fencing incl drilling holes, notching for wire etc, including straining bolts, holdfasts, wall ties, clamps, angle iron etc with end bars shouldered or riveted or forged into spikes, framed gaurd bars, railing frame work and similar confirming to Fe-410-O complete all as specified and directed.

M&L for painting to steel surfaces of any description exc 10 cm width or girth with two coats of synthetic enamel paint over a coat of red oxide including preparation of new or previously untreated surfaces all as specified and directed.

S & F Sheet glass 3.0 mm thick, ordinary quality and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane glazed with putty or fixed with beads complete all as specified and directed.

S& F galvanised stainless steel wire clothes 0.56 mm nominal dia of wire and average width of aperture1.18 mm complete all as specified and as directed .

M & L for Plain Cement Concrete 1:3:6 type C-1 as in bed blocks for hold fast and similar work etc complete all as specified and directed.

M&L for Precast cement concrete 1:2:4, type B1 (Using 20 mm graded stone aggregate) in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:4 including demolition of existing reinforced cover complete all as specified and directed.

Demolition of brickwork built in cement mortar or cement lime mortar including all quions, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.

M&L for brickwork with flyash bricks, straight or curved on plan exc 6m mean radius built in 1:4 cement mortar complete all as specified and directed.

M & L for brick work with fly ash brick in half brick thick built in CM 1:4 straight or curved in plan exceeding 6 mtr mean radius complete all as specified and directed.

M&L for rendering 15mm thick on brick wall or concrete surfaces in cement mortar (1:4) finished the surface even and smooth without using extra cement with using water profing liquid complete all as specified and directed. Note:- Water proofing liquid shall be measured and paid separately.

M&L for rendering 15mm thick on brick wall or concrete surfaces other than fair faces in cement mortar (1:6) finished the surface even and smooth without using extra cement complete etc. all as specified and directed.

M&L for preparing newly plastered surfaces of walls and applying two coat of cement base paint on walls all as specified and directed.

M&L for preparing old plastered surfaces of walls and applying two coat of cement base paint on walls all as specified and directed.

M&L for preparing old plastered surfaces of walls and applying one coat of cement base paint on walls all as specified and directed.

M&L for preparing old plastered surfaces of walls and applying one coat of OBD on walls including complete removing of existing treatement all as specified and directed.

M & L applying two coat of oil bound distemper white or tinted on new decorated or undecorated wall surfaces including preparation of surfaces, complete all as specified.

M&L for applying 2 mm thick layer of wall care putty on wall surfaces incl rubbing down the surfaces with sand paper after getting dried all as directed to obtain a smooth & even surface complete all as specified and directed.

M&L for applying 2 mm thick layer of birla wall care putty on ceiling surfaces incl rubbing down the surfaces with sand paper after getting dried all as directed to obtain a smooth & even surface complete all as specified and directed.

M&L, for 20-25 mm thick machine cut kota stone slab flooring with mirror polished set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including 20 mm thick screed bed in cement mortar 1:4 ,rubbing , polishing complete inclu Demolition Stone slabs and tiles of any description or thickness in floors aprons etc laid bedded and pointed in any mortar all as specified and directed.

M&L machine cut Kota stone slab 18 to 20mm thick with mirror polished in riser of steps skirting, dado and pillar,landing in single piece with round nosing with three numbers of serration, laid over cement screed and jointed with grey cement slurry mixed with pigment to match including rubbing & mirror polishing ding and inclucding 10mm thick cement plaster on brick surfaces or concrete surface in CM (1:4) finished even and rough as screed dismantling of wall tile including cement mortar bedding complete all as specified and directed.

Demolition Stone slabs and tiles of any description or thickness in floors aprons etc laid dry or laid dry and pointed complete all as specified and directed.

S&F 20 mm thick granite stone slabs mirror polished of colour and shade as approved by GE, machine cut bedded & jointed with grey cement slurry and pointed in white cement with admixture of pigment to match the shade of granite stone fixed as in steps, jambs, pillars window cills, cooking platforms & the like etc complete all as specified and directed .

Rounding to edges of stone slabs one edge , such as in steps , cooking platform , and other similar situations complete all as specified and directed

M&L for PCC 1:3:6 type C-2 (40 mm stone agg) as in plinth protection 75 mm thick finishing cement concrete even and smooth without using extra cement. Including 75 mm wide and 3 mm thick glass dividing strip inserted in position at every one meter and change of direction including Demolition of cement concrete (un reinforced) in ground floor or pavings of any description n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Demolition of cement concrete ( reinforced) in roofs , floors (other than ground floors) beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed.

M & L formwork to chullah hoods, chajjas, trough and similar items including edges finished rough surfaces of concrete complete all as specified.

M & L formwork to sides and soffits of lintels,lintel bend, beams etc finished rough surfaces of concrete complete all as specified.

S&F Mild steel TMT bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F TMT bars 10mm dia and over, cut to length, bent to shape required,including binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

S&F deformed or twisted bars 5mm and over upto and including 10mm dia in stirrups, spacers and binders bent to shape required,including binding with mild steel wire (annealed) not less than .9mm dia complete all as specified and directed.

M&L RCC 1:2:4 type B1 using 20 mm graded aggregate as as in chajjas and like all as specified and directed.

M&L RCC 1:2:4 type B1 using 20 mm graded aggregate as in slab, shelves and stair case etc.all as specified and directed.

S&F in repair vitreous china squatting pan "Orissa" pattern size 580mmx440mm white with integral foot rests excluding 10ltrs capacity PVC flushing cistern low levl with inlet, ball valve float chain and pull and brackets, flush pipe of polyethylene of low level complete all as specified and directed.

S&F in repairs 10 ltrs PVC valveless syphonic action type flushing cistern low level white , with inlet ball valve, float and handle including bracket with 32 mm dia PVC pipe 600 mm long complete all as specified and as directed.

Cutting chases for GI concealed water tubing and making good with cement sand mortar 1:3 cutting n exc 10cm girth complete all as specified and directed.

S&F in repair bib taps 15mm bore CP fency long body Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed and fixed complete all as specified and directed.

S&F in repair 15mm bore Fency type CP brass Stop valves, cast copper alloy,screwed down, high pressure,with crutch orbutterfly handle, screwed both ends for iron pipe or for unions and fixeds complete all as specified and directed.

S&F in repair 20mm bore Fency type CP brass Stop valves, cast copper alloy,screwed down, high pressure,with crutch orbutterfly handle, screwed both ends for iron pipe or for unions and fixeds complete all as specified and directed.

S&F in repair 15mm bore Fency type CP brass angle valves, cast copper alloy,screwed down, high pressure,with crutch orbutterfly handle, screwed both ends for iron pipe or for unions and fixeds complete all as specified and directed.

S&F in repair 15mm bore Fency type CP brass concealed Stop valves, cast copper alloy,screwed down, high pressure,with crutch orbutterfly handle, screwed both ends for iron pipe or for unions and fixeds complete all as specified and directed.

S&F in repairs vitreous chinaware coloured wash hand basin with pedestal of size 55X45X82cm complete including fancy CP pillar tap, CP Waste coupling ,waste pipe ,complete fixing arrangement and cutting for and pinning in walls & making good complete all as specifed and directed by Eng in charge.Model : WHB - Cat No 10072, Pedestal- Cat No. Ped 11029 Neptune of Hindware ,Parryware Cat No C0480 (SP) 181/CTH ,C 0375 pedestral, Cera Cat No 2090107Ped , Cat No S 2040112 WHB complete all as specified and directed.

S&F PVC connection 15mm bore length not less than 450 mm long with both ends PTMT nuts complete all as specified.

S&F 32 mm bore Low density polyethylene (LDPE) (corrugated Waste pipe) pipes of pressure rating 6 kgf/sq. cm complete all as specified and directed.

S&F 20 mm dia gun metal ,globe or gate valves , with iron wheel head , screwed both ends for iron pipe complete all as specified and directed.

M&L Taking up or down existing steel tubing and connections including cleaning for refixing or removal to stores complete all as specified and directed for 15mm bore complete all as specified and directed.

M&L Taking up or down existing steel tubing and connections including cleaning for refixing or removal to stores complete all as specified and directed for 20mm bore complete all as specified and directed.

S&F 15mm bore GI water tubing medium grade galvanised with all fittings and fixed complete to walls and ceilling or laid in floor complete all as specified and directed.

S&F 20mm bore GI water tubing medium grade galvanised with all fittings and fixed complete to walls and ceilling or laid in floor complete all as specified and directed.

Refixing 15mm bore old steel water tubing and connection in new or old position (walls, ceilling, floor etc) complete all as specified and directed.

Refixing 20mm bore old steel water tubing and connection in new or old position (walls, ceilling, floor etc) complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes of single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed.

S&F 75 mm bore. PVC(SWR) junction single (single T) equal or unequal with access door complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes of single socketed in any length with rubber ring joints fixed to wall all as specified.

S&F 75 mm bore. PVC (SWR) bends any radius complete all as specified and directed.

S&F 75 mm dia PVC (SWR) bends any radius with access door complete all as specified and directed.

S&F 75 mm dia PVC (SWR) floor trap plain with greting incl jointing with solvent cement complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches/floor complete all as specified and directed.

S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F 110 mm PVC (SWR) bend any radius complete all as specified and directed.

S&F 110 mm bore.PVC(SWR) junction single (single T) equal or unequal with access door complete all as specified and directed.

S&F in repair grating doom 100 mm dia of PTMT (Min wt 25 gms) complete all as specified and directed.

S&F towel rail cast copper alloy, chromium plated 600mm long with bracket in repair complete all as specified and directed.

S&F in repair Brass chromium plated shower rose 125mm size fixing with 15mm pipe fixed all as specified.

S&F in repair 110 mm dia PVC (SWR) vent cowl complete all as specified and directed.

S&F 80 mm dia stack clamps out of 50mmx5mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

S&F Stack clamps out of 50 x 5 mm flat iron and 16 mm dia round iron stays for 100mm bore pipes, incl bolts and nuts and securing ends of stays to walls or roof complete all as specified and directed.

M&L 40mm thick PCC 1:2:4 type B1 using 20mm graded stone agg laid in panel finished even & smooth with using extra cement as in flooring complete all as specified and as directed.

M&L for 75mm thick PCC 1:4:8 type D-2 (40 mm stone agg) as in Sub base finishing cement concrete even amd smooth without ung extra cement complete all as specified and as directed.

M&L60 mm thickness machine pressed precast interlocking paver block any shape and size conforming to IS - 15658-2006 of M-40 grade with grey cement and pigment complete all as specified and as directed.

M&L for Sand for plastering or pointing or laid for paver complete all as specified and as directed.

S & F for 500 ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified removing to store complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width strucks inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either to side and as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site as specified of drawing complete all as specified and as directed.

S & F stainless steel plate rack not less than 5 Kg of size in repair complete all as specified and dirrected.

S & F in repair chromium plated shower rose with or without swivel joints, any size, including fixing to steel pipe or union size 125 mm complete all as specified and directed.

S&F in repairs 75 mm x 32 mm dia chromium plated waste fitting special size suitable for stainless steel sinks including PVC flexible waste pipe of approved quality complete all as specified and directed.

S&F in repair of PVC corner set of three of size (12'X12" ,9"X9" and 6" X6" ) with railling and complete all as specified and directed.

Supply and fix APP polymeric water proofing membrane, minimum 4mm thick and weighing above 3.50 Kg/Sqm as approved by GE, black finish reinforced with non-woven polyester matt, with a thermo fusable finish laid over compatible bitumen primer (Bitumen primer shall be at the rate of 0.40 Kg/Sqm torching overlaps with a propane or a butane gas torch, with a overlap of 75mm at the sides and 100mm at the ends and sealing including applying a coat of cold emulsion bituminous primer all as per manufacturer’s instructions complete all as specified and as directed. Note: (i) Coved fillets in PCC(1:2:4) type B-0 using 12.5mm graded stone aggregate, of radius 75mm shall be provided at the junction of roof and parapet wall/mumty/chimney/other vertical surfaces and thereafter surface painted with hot paving bitumen of Grade 30/40 confirming to IS-73, [email protected] Kg/Sqm over a coat of bituminous primer confirming to IS-3384 applied @ 0.40 Kg/Sqm (ii) Polymeric membrane shall be taken to a height of 45cm (minimum) and then inserted inside the groove of parapet wall of brick masonry and shall be finished by a membrane flushing. (iii) The waterproofing treatment shall be got carried out by the manufacturer or their authorized applicators. (iv) In case of stone masonry parapet wall etc a groove of size 25mmx25mm(minimuim) shall be made in coved fillet at the junction of roof and parapet wall/mumty Chimny/other vertical surfaces and polimeric membrane insterted in groove and sealed with paving bitumen (v) Exposed surfaces of APP membrane shall be applied with one coat of bituminous aluminium paint @ 150 ml/Sqm. (vi) Taking down of existing roof treatment(vii) Above aspects are deemed to be included in quoted rate.

M & L for cement concrete tiles 250 x 250 x 20 mm thick, machine pressed, fixed with neat cement slurry and joint filled with sealing compound over and including 20mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

Dismantling of roof terracing cement / brick concrete (un-reinforced) and existing water proofing treatment of any thickness in any position and of any portion from top of roof of building, cleaning surface of roof with wire brush / mechanical brush and with water thoroughly to remove all dust / dirt and loose particles to expose base concrete roof slab and removal of rubbish / demolished material out of MD land complete all as specified and directed.

M & L for Providing water proofing treatment to RCC sunken slab as specified and directed as under:- (a) Cleaning the existing RCC sunken slab and vertical wall/RCC beam and hacking the surface. (b) 15mm thick plastering over the floor & vertical surface in CM 1:4, mixed with liquid water proofing compound @ 200ml per 50 kg of cement trowelled to even and smooth finish without using extra cement .(Water proofing compound shall be measured and paid separately). (c ) filling the sunken portion with water for 72 hrs and carring out the ponding test.(Any leakage /seapage noticed shall be repaired). (d) Applying two coats of elastomaric acrylic water proof coating Make: Dr. Fixit of pidilite or equivalent per sqm in each coat with roller application.(Note: Each coat of elastomaric acrylic compound requires 6-8hrs to dry up itself second coat shall be applied on getting the first coat completely dried up.)

Supply only liquid waterproofing compound complete all as specified and directed.

M&L for cement concrete 1:5:10 type E2 (40 mm graded aggregate) as in mass concrete complete all as specified and directed.

M&L for PCC 1:2:4 Type B0 using 12.5 mm graded stone aggregate as in levelling course, haunching, coping and similar works of over RCC roof surface including rounded or chamferred on edges etc complete all as specified and directed.

Excavating in post holes (or similar holes) in soft/loose soil. Each n.exc 0.50 cum and getting out returnin filling including ramming earth or broken rubble mixed with earth around, in layers n. exc 25 cm watering and removing surplus soil to a distance n. exc 50m and making good surface complete all as specified and as directed.

M&L PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in foundation filing and mass concrete for fixing angle iron posts all as specified and directed.

S&F mild steel work for posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S & F mild steel screw bolt 12 mm dia (Machine made ) with hexagonal head at one end andscrewed other end ,screwed end to be fitted with one washer and hexagonal nut length not exc 10 cm long complete all as specified and as directed.

Supply only chain link fencing made out on 4mm dia, GI of mesh size 100mm x 100mm including line wire, binding wires, straining bolts etc complete all as specified and directed.

Fixing only chain link fencing including line wires any mesh, size and any type of standards rails, including line wire, binding wires, straning bolts etc complete all as specified and as directed.

S & F Rolled Mild Steel Framed work as in chowkhat, doors or Gates of angle or other section confirming to Fe 410 - S, with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering and hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing including dismantling old steel work complete complete all as specified and directed.

Dismantling asbestos cement (corugated or semicorrugated etc ) sheets, in roof covering complete all as specified and directed.

S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/clading to wall, fixed with self tapping screws/ as specified.

S&F pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in ridges, roof covering/clading to wall, fixed with self tapping screws as specified.

Dismantling wall and ceiling board or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed.

Dismantling of unframed timber scantling under 40 Sqcm, fixed in any position in fillet rails, posts rafters purlin etc complete all as specified and as directed.

Dismantling of unframed timber scantlings 40 Sqcm and over in section in any position complete all as specified and as directed.

M&L for 10mm thick GRG false ceiling tiles for insulation and accoustic purpose 60cm x 60cm with and including powder coated galvanised iron snap grid with 32x25x1.5mm thick Tee section and 32x25x1.5mm thick algle section with all hanging/supporting arrangements as in false ceiling and making good disturbed surface complete all as specified and directed.complete all as specified and directed.

Taking down cement plaster including racking out joints, hacking for key & scrubbing down with water etc as specified and directed.

M&L for 16 to 18mm thick granite (of any type and shade) work (table rubbed and polished) in floors, steps, jambs, pillars, window cills, cooking plateforms and like in CM 1:4 incl pointing in white cement(1:2) using marble dust with admixture of pigment to match the shade of granite stone including grinding and polishing, moulding of edges complete over and incl 15 mm thick screed bed or bedding layer of mortar in cement mortar 1:4 complete incuding hole for gas pipe all as spd and directed

Hacking out old broken glass (any thickness size, quality or description) from wooden frames glazed with putty of fixed with beads as specified and directed.

Taking down shutter of any description not exc 1 sqm each complete all as specified and directed

Taking down shutter of any description exc 1sqm and not exc 2 sqm each complete all as specified

S&F mild steel window grills box type framed work as in window guard bars, grills or forged into spikes, framed balusters, walkway railing and similar work including welding complete FE-290 grade E-165 all as specified and directed.

S & F solid PVC door frames of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube all as specified or as directed.

M & L for Treating surfaces of steel, anydescription, width or girth, with ready mixed paint, matt black with two coat as specified or as directed.

M & L for Treating surfaces of wood, any description, width or girth, with ready mixed paint, matt black with two coat as specified or as directed.

M & L applying two coats of oil bound distemper white or tinted on old decorative plastered or undecorated wall surface including preparation of surfaces, by complete all as specified.

M&L for preparation of newly plastered or untreated surfaces and applying three coats of white wash to Ceiling all as specified or as directed.

M&L for preparation of newly plastered or untreated surfaces and applying three coats of white wash to walls all as specified or as directed.

Demolition of cement concrete(unrinforced), in any position and paving n.exc. 15 cm thickness( below or above ground level) including tile/ terrazzo floor complete all as specified and directed.

M & L for plain cement concrete 1:2:4 type B-0(using 12.5mm graded stone aggregate) as in floor 25 mm thick finished even and smooth with using extra cement or as specified or as directed.

S&F glass dividing strips, 3 mm thick 22 mm with inserted in position to confirm to design complete all as specified and as directed.

M&L providing cement concrete 1:3:6 type C1 (using 20 mm graded stone aggregate) as in benching, coping, bed blocks including necessary form work, weathering slightly rounded or chamfered angles and throating, complete all as specified and directed by Engineer-in-charge.

M & L for preparing and treating ends of posts, back of chowkats with coal tar black paint, area tarred exc. 0.10 sqm but not exc. 0.50 sqm all as specified or as directed.

M & L for preparing and treating small articles such as hold fasts with coal tar black paint, area tarred not exc. 0.10 sqm all as specified or as directed.

S&F 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gms complete all as specified or as directed.

S & F in repair PTMT grating size 125 mm fixed with white cement complete all as specified or as directed.

S&F in repairs stainless steel kitchen sink with drainage board of overall size 915x460mm and bowl size 410x330x160mm with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe complete all as directed.

S&F in repair vitreous china,white, wash hand basin, flat back size 550x400mm 'including MS brackets including cutting for and pinning in, but excluding waste pipe all as specified and directed.

S&F 15 mm dia brass chromium plated pillar tap, fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut, capstan head, screwed for 15mm dia pipe all as directed.

Taking up or down AC/PVC rain water pipe, soil/waste/vent pipe of any size with fittings etc. complete all as specified and as directed.

S & F framed brackets of angles or tees with web and flanges cut to shape, drilled and counter sunk for screw including bending and welding angles as necessary gusset plates, riveting etc, n.exc 10 Kg each brackets conforming to Fe-290 Gde E-165 (Brackets over 10 Kg each to be measured under Structural steel complete all as specified and as directed.

M & L for Plain Cement Concrete 1:2:4 in surface chanel and drain work etc complete all as specified and directed.

M&L for RCC (Type B0, 1:2:4 12.50mm graded aggregate) as slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M & L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) with fair finishes as spefied and directed.

Dismantling water tanks and removing to store capacity exc 250 and not exc. 500 litres complete all as specified and directed.

M & L for plain cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) as in plinth protection 75 mm thick finished even and fair or as specified or as directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 sectiion) in cement concrete 1:2:4 (type B1) smooth finished, and reforming benching as required of pipe 100mm dia complete.

PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified.

S&F32 mm Waste coupling of PTMT (half or full threaded) weight 40 gm including waste pipe as specified and directed

S&F PVC (SWR) vent cowl 75 mm dia as specified and directed

M & L for Concrete bed to drain pipes of 100mm bore including packing under and hauching against the sides of pipes after they are laid and tested in PCC 1:3:6 type C2 complete all as specified

Cutting holes into or through cement concrete (Reinforcement) slabs, chajjas is cut through not ex 100 sqcm as specified and directed

M&L Second class hard-wood clean sawn in scantlings as specified and directed

M& L for preparing Old plastered surfaces of ceiling and applying one coat of white wash complete all as specified and as directed.

M&L for dismantling posts & struts (wood, steel or RCC) any section, bedded in gound, including taking out embedded portation and making good distrubed ground complete all specified and as directed.

M&L for dismantling of fencing wire meh any type complete all as specified and as directed.

Taking down carefully, old unserviceable aluminium point wiring (light, fan, socket, bell, buzzer or power) complete including unserviceable fittings such as switch, socket, ceiling rose, lamp holder, light fittings, bakelite sheet, terminal box, etc. and making good to disturbed surfaces of wall/floor and ceiling etc. and removal, complete all as specified and as directed by E-In-C Note:- Existing CFL/FTL fittings are not to be removed and rates are inclusive of taking down & refixing of existing CFL/FTL fitting at any location as directed by Engg-In-Charge. Disturbed surfaces shall be made good by plastering and applying two coats of white wash or OBD to match the existing surface finishes complete all as specified and as directed.

Taking down carefully by unscrewing from DB box MCB SP/SPN/TPN of sizes & any capacity all as directed.

Taking down carefully by sub main wiring of any size all as directed.

M & L for Point wiring in concealed PVC conduit using stranded copper conductor cable of size 1.5 Sqmm, PVC insulated unsheathed FRLS cable complete with all fittings and accessories but using existing sunken cast iron or pressed steel terminal box for mounting of switches, sockets, fan regulators etc but providing new cover 3mm thick laminated,(Hylem) sheet top cover fastened with chromium plated screws and 1.5 Sqmm PVC insulated stranded copper conductor FRLS cable as continues earth wire connected to common earth dolly all as directed and as specified for the following :- NOTE: for wiring in ceiling portion conduit shall be fixed with surface of ceiling/with trusses etc.

One light/fan/Exhaust fan point controlled by one switch

One Multipin pin socket outlet 5 Amp on independent board.

One 3/5 pin socket outlet 5 Amp on same board

One bell/buzzer point controlled by one Push button.

All per Srl item No. 168 here-in-before, but with 2.5 Sqmm copper conductor cable complete all as specified for One 3 pin socket outlet 15 Amp on independent board.

M & L for wiring with and including multi stranded copper conductor 2.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed, FRLS cable, 1100 volts grade, ISI marked with valid CML number, drawing through in and including medium grade, rigid non metallic, PVC concealed conduit of 20mm bore and including cutting dcheasesx for conduits and sinkings for boxes its accessores & including with multi stranded copper conductor 3.5 sqmm (nominal cross sectional area ) single core, PVC insulated, unsheathed, FRLS cable, 1100 volts grade, ISI markded with valid CML number as continuity earth wire terminating with new sunken conceate terminal boxes complete all as specified and directed.

S &F switch piano flush type polycarbonate SP one way 6 Amps complete all as specified and directed

S&F socket out let 2 in 1 flush type 3 pin 6 amp

S &F switch piano flush type polycarbonate SP one way 16 Amps complete all as specified and directed

S&F socket out let 2 in 1, 6 pin flush type 5/15 amp flush type 210 V

S&F bell push piano flush type 5 amp single pole one way complete.

S&F bell ding dong type AC 230 volt single pole Complete.

S&F ceiling rose surface Bakelite 65 x 50 mm two to three terminals complete.

M & L for replacement of Step regulator electronic fan regulator flush type on the existing phenolic laminated sheet etc as required complete & all as specified and directed.

S&F Lamp holder, PVC/polycarbonate type with back plate suitable for pendent fitting and including LED 9Watt Lamp of complete all as specified and as directed.

Supply and fixing LED lights fitting 1x 10W, 220V,AC 2 feet decorative box type with driver, holder includingLED tube light connecting up with three core flexiblecopper conductor cable of suitable size from ceiling rose complete complete all as specified and as directed.

Supply and fixing LED lights fitting 1x 20W, as with 220V,AC 4 feet decorative box type with driver, holder includingLED tube light connecting up with three core flexiblecopper conductor cable of suitable size from ceiling rose complete complete all as specified and as directed.

S&F Wall bracket light fitting 12 Watts,(CITY-3) Powder coated, decorative fitting made out of polycarbonate base, B-22 complete with 12 Watts, LED lamp complete all as specified and directed.

S&F LED lamp 12 Watts, 230 V AC inetgrated circuit complete all as specified and directed.

S&F LED lamp 7 Watts, 230 V AC inetgrated circuit complete all as specified and directed.

S&F security light fitting, Supply and fixing new energy saving LED light fitting 20 watt made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP 66 protection and impact resistance of IK07 as reqd to be mounting bracket in wall/floor to suit the opening of the fitting with FI clamp, nut, bolt and washers of suitable size including making connection complete all as specified and as directed by E-In-C.

Material and labour for two single core PVC Insulated unsheathed multi stranded FRLS copper conductor cable of size 6 sqmm as sub main wiring including suitable size heavy duty rigid PVC conduit and of PVC insulated unsheathed multi stranded FRLS copper conductor cable of size 6 sqmm as an earth continuity conductor complete all as specified.

Material and labour for two single core PVC Insulated unsheathed multi stranded FRLS copper conductor cable of size 4 sqmm as sub main wiring including suitable size heavy duty rigid PVC conduit and of PVC insulated unsheathed multi stranded FRLS copper conductor cable of size 4 sqmm as an earth continuity conductor complete all as specified.

Taking down carefuly ceiling fan and keeping in safe custody for reuse at site after bldg repair including painting of ceiling fans complete, in situ with synthetic enamel paint by sprying including filling cavities with filler, one coat after cleaing all dust (painting and minor repairs etc including refixing the same at point complete all as specified and directed.

Taking down electric meter carefully and re-fixing the same after bldg repair including the same fixed on new laminated sheet etc as required complete all as specified and directed.

S&F MCB SP 40 Amps 10 KA C series complete all as specified and directed.

Supply and fix MCB SPN 6 to 32 Amps complete all as specified and directed.

Supply and fix flush Sheet Metal enclosure, SPN, DB, 8 Way with double door, IP-42 Protection, detachable gland plate, flush mounting for MCB fitted with bus bar, earth bar and neutral links complete all as specified and directed.

Supply and fix Meter box flush on wall of suitable size as existing space made out of CRCA sheet of 2mm thick indoor type totallty enclosed weather, dust and vermin proof with front opening hinged door and locking aragement with angle iron frame alround panel body duly grouted on wall, having inner shell for fixation of SPN DB 8 way and space for fixing single phase KWH meter of suitable capacity 01 Nos , copper lugs, spacers, Mounting Channel, rubber gasket, locking knowbs, Hylam sheets pieces, PVC shriknable connections,suitable compartments and epoxy power spray painted with one coat primer complete including taking down existing complete all as specified and as directed. Note:- All connection wiring with 6 sq mm PVC insulated single core multistranded copper conductor drawing through PVC flexible conduit and connected with appropriate size copper thimbles.

Supply and fix flush Sheet Metal enclosure, SPN, DB, 4 Way with double door, IP-42 Protection, detachable gland plate, flush mounting for MCB fitted with bus bar, earth bar and neutral links complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 3.15mm thick, buried directly in ground, vertically to a depth not less than 2.25 mtr deep below ground level with top edge of the earth plate at depth not less than 1.5 mtr below ground level earth plate surrounded by 15 cm thick and packed layers of charcoal, dust and common salt, earth lead GI wire 4mm dia by means of bolts, nuts, check-nuts and washers of galvanized iron and thimbles and of earth wire protected by galvanized iron pipe light grade 15mm bore and water pipe 20 mm bore GI medium grade with funnel and wire mesh complete including excavation and earth work, PCC chamber and cover in cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregate in lieu of CI cover and frame etc all as specified and shown in electrical plate No. 5 of SSR-2009 (Part-I).

Taking down service connection/UG cable removing of site complete all as specified and directed.

Excavation in trenches not exceeding 1.5M wide and not exceeding 1.5M in depth and getting out in soft/loose soil for laying of under ground cable and foundation of poles complete all as specified and as directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers n.exc 25 cm in soil complete all as specified and as directed.

Removing of excavated soil not exc 50 m and depositing where as directed at a level n.exc 1.5 m above from starting point. complete all as specified and as directed.

Supply and laying bricks old size, well burnt sub class 'B' bricks as in protection cover for under ground cable laid width wise across the cable adjoining each other, laid dry complete all as specified and directed.

M&L for dry river sand cushioning for under ground cable protection with a layer of 8cm deep before laying and 15cm covering above the top ebdge of cable after laying and punning to 18 cm thickness complete all as specified and directed.

S&F galvanized iron pipe of 40 mm bore, Light grade with all fittings for cable protection for road crossing/ culvert/ path/ on wall/ floor/ pole or laid in floor complete all as specified and directed.

Supply, lay, joint, test and commisioning LT, XLPE insulated, screened, PVC bedded, armoured, heavy duty, electric cable with stranded aluminium conductor, 1100 Volts grade, cross sectional area 10 Sqmm, 4 core complete all as specified and directed.

S&F in repair LED bulk head light fitting with all accessories with lamp, cover plate, 9 W bulb, metal box etc complete as required as per standered make complete all as specified and directed.

Hanging only ceiling and connecting including provision of cable from ceiling rose or connector to fan complete all as specified and directed.

M & L for Rewinding of ceiling fan with copper wire incl replacement of bearing, greasing and painting with white paint complete all as spcified and directed. Note : Tenderers may note that amount of credit Rs. 1,46,745.00 will be deducted from the total amount arrived, at the time of Acceptance of tender.

TEAM ACC INFRABUILD PRIVATE LIMITED

REHAN CONSTRUCTION

M/S Rajeev Sharma and Co.