ANNUAL RATE FOR MAINTENANCE AND REPAIRING WORK OF VARIOUS ANGANWADI BUILDINGS IN NEW AREA OF NORTH ZONE (KATARGAM), SURAT.

NAME OF WORK :- ANNUAL RATE FOR MAINTENANCE AND REPAIRING WORK OF VARIOUS

ANGANWADI BUILDINGS IN NEW AREA OF NORTH ZONE (KATARGAM), SURAT.

SOR 2023-24 & M.R (Without GST & With Cess)

SN ITEM Qty Unit Total

Excavation for foundation includ.sorting out &

stacking of useful materials & disposing of the

excavated stuff upto 50 mt. Lead & all lift,

watering etc. Comp. (A) Loose or Soft soil

Executed With Mechanised Efforts / Machinaries

(1) Up to 1.5 Mt. depth 5 117.26 C.M.

Excavation for foundation includ.sorting out &

stacking of useful materials & disposing of the

excavated stuff upto 50 mt. Lead & all lift,

watering etc. Comp. (A) Loose or Soft soil

Executed With Manual Labours

(1) Up to 1.5 Mt. depth 5 203.83 C.M.

Providing & Laying C.C1:5:10 (1cement :5coarse

sand :10 graded stone agg. 40 m.m Nominal size )&

curing comp. excl. cost of from work in :Foundation &

Providing & laying cement concrete 1:4:8 (1

cement:4 coarse sand:8 graded stone agg. 40 mm

nominal size) & curing comp. excl.cost of form work

in (A) Foundation and Plinth

Providing & laying C.C 1:3:6 (1cement :3 coarse sand

:6 Crushed stone agg 20m.m Nominal size)&curing

comp. excl. cost of form work in :(a) foundation &

Providing & laying cement concrete 1:1.5:3 (1

cement:1.5 sand:3 graded stone agg. 20 mm nominal

size)& curing comp. Includ.cost of form work but

exclu. Cost of reinforcement for reinforced concrete

work in : (A) Foundation, footing, Base of columns

and Mass concrete.

Filling available excavated earth (excluding rock) in

trenches. plinth, sides of foundations etc. in layers not

exceeding 20 cm. in depth consolidating each

disposited layer by ramming and watering.

Filling in foundation and plinth with murrum or

8 selected soil in layers of 20cm. thickness including 3 289.06 C.M.

watering, ramming and consolidating etc. complete.

Providing & laying ordinary cement con.1:1.5:3

(1cement: 1.5sand: 3 graded graded stone agg.

mm nominal size) finishing smooth curing etc.

comp. Incl.. Cost of form work but excl. Cost of

reinforcement for R.C.C. Work in :

(1)Having c/s area up to 0.08 s.mt- Ground Floor 1 12,632.60 C.M.

First Floor 1 12,672.24 C.M.

Second Floor 12,711.88 C.M. -

Terrace (third) Floor 12,751.53 C.M. -

(2) c/s area more than 0.08sq. mt. & upto

First Floor 1 11,206.61 C.M.

Second Floor 11,246.25 C.M. -

Terrace (third) Floor 11,285.89 C.M. -

(3) Having cross sectional area more than 0.12 sq.

First Floor 1 9,241.32 C.M.

Second Floor 9,280.96 C.M. -

Terrace (third) Floor 9,320.61 C.M. -

(1)Having c/s area up to 0.08s.mt- Ground Floor 1 9,102.61 C.M.

First Floor 1 9,142.25 C.M.

Second Floor 9,181.89 C.M. -

Terrace (third) Floor 9,221.53 C.M. -

(2) Having c/s area more than 0.08 s.m. & upto

First Floor 1 8,214.05 C.M.

Second Floor 8,253.69 C.M. -

Terrace (third) Floor 8,293.33 C.M. -

(3) Having cross sectional area more than 0.12 sq.

First Floor 7,126.52 C.M. -

Second Floor 7,166.16 C.M. -

Terrace (third) Floor 7,205.81 C.M. -

(2) Slabs having more than 8cm. and upto 10 cm.

First Floor 1 8,024.06 C.M.

Second Floor 8,063.70 C.M. -

Terrace (third) Floor 8,103.34 C.M. -

(3) Slabs having more than 10 cm. & upto 13 cm.

First Floor 1 7,436.60 C.M.

Second Floor 7,476.24 C.M. -

Terrace (third) Floor 7,515.89 C.M. -

(4) Slabs having more than 13 cm. Thickness -- G.F 1 6,813.01 C.M.

First Floor 1 6,852.65 C.M.

Second Floor 6,892.29 C.M. -

Terrace (third) Floor 6,931.94 C.M. -

(D) LINTELS: -- G.F 1 9,531.24 C.M.

First Floor 1 9,570.88 C.M.

Second Floor 9,610.53 C.M. -

Terrace (third) Floor 1 9,650.17 C.M.

(E) CHAJJAS: -- G.F 1 5,512.83 C.M.

First Floor 5,552.47 C.M. -

Second Floor 5,592.11 C.M. -

Terrace (third) Floor 5,631.76 C.M. -

Providing & laying ordinary cement

con.1:1.5:3(1cement:1.5sand:3 graded graded stone

agg. 20 mm nominal size) finishing smooth curing

etc. comp. Incl.. Cost of form work but excl. Cost of

reinforcement for R.C.C. Work in :

(A) Stair cases including landings etc.

Ground Floor 1 7,380.20 C.M.

First Floor 1 7,419.85 C.M.

Second Floor 1 7,459.49 C.M.

Terrace (third) Floor 1 7,499.13 C.M.

(B) Vertical and horizontal fins

Ground Floor 1 10,831.75 C.M.

First Floor 1 10,871.40 C.M.

Second Floor 1 10,911.04 C.M.

Terrace (third) Floor 1 10,950.68 C.M.

Providing & fixing IS Mark TMT Bar FE 500d

reinforcement for R.C.C. work incl. bending, binding 50 76.21 Kg.

& placing in position etc.comp.---Ground Floor

First Floor 30 77.21 Kg.

Second Floor 20 78.21 Kg.

Terrace (third) Floor 10 79.21 Kg.

Brick work using common burnt clay building bricks

having crushing strength not less than

kg./Sq.Cm. in Cement Mortar 1:6 (1- Cement : 6 - 10 4,511.97 C.M.

fine sand)(C) Fly Ash Bricks

First Floor 10 4,786.95 C.M.

Second Floor 5 5,061.92 C.M.

Terrace (third) Floor 5 5,379.24 C.M.

Half brick masonry in common brunt clay building

bricks having crushing strength not less than

Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 - 10 625.53 S.M.

coarse sand ) in foundation and plinth

13 (C)Fly Ash Bricks

Ground Floor 10 678.86 S.M.

First Floor 5 631.79 S.M.

Second Floor 5 638.04 S.M.

Terrace (third) Floor 5 644.29 S.M.

Uncoursed rubble masonary with hard stone

of approved quality in foundations and plinth in

cement mortar 1:6 (1 Cement : 6 sand) including

leveling up etc. complete.

Providing Rubble Pitching with hard stone of

approved quality in cement mortar 1:6 (1 Cement

: 6 Coarse sand) including leveling up ,Curing etc.

complete excluding pointing

Providing and filling rubbles including hand packing

16 and filling interstices with quarry spalls behind 1 1,064.80 C.M.

abutments and between returns as directed.

Providing & Applying 10mm.th.cement plaster in

single coat on brick/ concrete walls similar surfaces

for plastering & finished even & smooth with a

floating coat of cement slurry mixed with 10 189.79 S.M.

admixture of lime or neeru in required proportion

etc. comp. in C.M 1:3 (1 cement : 3sand) (A) For

wall and similar surfaces -- Ground Floor

First Floor 10 217.93 S.M.

Second Floor 5 246.07 S.M.

Terrace (third) Floor 5 274.20 S.M.

(B) For ceilings & soffits of stairs

Ground Floor 10 214.60 S.M.

First Floor 10 242.74 S.M.

Second Floor 5 270.88 S.M.

Terrace (third) Floor 3 299.02 S.M.

Providing & Applying 15mm.th.cement plaster in

single coat on brick/ concrete walls similar surfaces

for plastering & finished even & smooth with a

18 floating coat of cement slurry mixed with 5 237.51 S.M.

admixture of lime or neeru in required proportion

etc. comp. in C.M 1:3 (1 cement : 3sand) (A) For

wall and similar surfaces -- Ground Floor

20mm thick sand faced cement plaster on walls

for height more than 10 metres above ground level

19 consisting of 12mm thick backing coat of C.M. 1:3 (1- 10 330.88 S.M.

cement : 3-sand) and 8mm thick finishing coat of C.M.

1:1 (1-cement : 1- sand) etc. complete.

Providing 20 mm thick double coat mala cement

plaster on brick / concrete work for plastering

comprising of base coat 12 mm thick cement

20 plaster in cement mortar (1 Cement : 4 coarse sand) 5 272.48 S.M.

in rough finishing and 8 mm thick top coat of cement

mortar 1:2 (1 Cement : 2 Coarse sand) finished with

trovel including scaffolding curing etc. complete.

Providing & Applying 20mm. Th. Heavy Roller

plaster on walls or similar surfaces at all floor

levels consisting of 12 mm av. Th. Backing coat of C.M.

1:3 (1 cement:3 sand) & 8 mm. th. Finishing coat of

C.M. 1:1 (1 cement: 1 sand) apply thick cement

slurry and apply roller horizontal as well as vartical (

two times ) up to good quality and size of grain in

elevation as per directed by engineer incharge.

Providing throating or plaster drip and

moulding it to R.C.C. chajja etc. comp.. For all floor

Providing 20 mm deep finished groove in

23 plaster in line and level etc. Comp. For all Floor 5 50.00 R.M.

Providing and laying polished Kota stone slab

flooring over 20mm (Average) thick base of cement

mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5

24 (1-Lime putty :1.5 - coarse sand) laid over and 25 989.45 S.M.

jointed with grey cement slurry mixed with pigment

to match the shade of slab including rubbing and

polishing etc. complete. (A) 25mm thick

Providing and laying polished kota stone slab

25mm thick in risers of steps,skirting Dedo and

pillars laid on 10mm thick cement mortar 1:3 (1-

25 Cement : 3 coarse sand) and jointed with gray 15 1,076.94 S.M.

cement slury mixed with pigment to match the

shade of slab including rubbing and polishing etc.

Providing & Laying white glazed tiles 6mm.

th. of Orient, Kajaria, Jhonson,Nitco,Somani ,Bell

make at all floor levels, in flooring, treads of

steps & landings laid on a bed of 12 mm. Av.

Th.C.M.1:3(1cement :3 sand) finished with flush

pointing in white cement etc.com. For all floors

Providing & Laying white glazed tiles 6mm.

th. Of Orient, Kajaria, Jhonson,Nitco,Somani,Bell

make at all floor levels in skirting risers of steps &

27 dado on 10 mm. th. C.M.1:3(1cement :3 sand) 10 887.64 S.M.

including necessary cement paste for fixing and

joined with white cement slurry etc. complete. For all

Providing and laying Ceramic tiles 6mm thick in

flooring treads of steps and landing laid on a bed of

12mm thick cement mortar 1:3 (1-cement : 3-coarse

sand ) finishing with flush pointing in white cement.

Providing and laying Ceramic tiles 6mm thick in

skrting risers of steps and dedo on 10mm thick

cement plaster 1:3 (1-cement : 3-coarse sand) and

jointed with white cement slurry

Providing & laying granite slab 18mm thick in

flooring, treads of steps and landing laid on bed

of 20mm thick cement mortar 1:6 (1 Cement :

30 coarse sand) or lime mortar 1:1.5 laid and finished 25 2,410.00 S.M.

with flush pointing in white or colour cement

including rubbing and polishing complete. ( Basic

Rate:- Rs.1347.46/S.M.)

Providing & laying granite slab 18mm thick in

skirting, risers of steps, dedo and pillars laid

on 10mm thick cement mortar 1:4 (1 Cement :

Coarse sand) and finished with flush pointing in

white or colour cement including rubbing & polishing

comp.. (Basic Rate:- Rs.1347.46/S.M.)

Providing & laying granite slab 18mm thick in

Window-Door seal Frame Etc laid on 10mm thick

cement mortar 1:4 (1 Cement : 4 Coarse sand) with

nessary adhesive material and finished with flush

pointing in white or colour cement, including rubbing

& polishing comp.. (Basic Rate:- Rs.1000.0/S.M.)

33 Labour Charges For Edge Finished For Granite 25 43.43 R.M.

Providing & laying Vitrified tiles of 8mm thick of

Orient, Kajaria, Jhonson, Nitco, Somani, Bell, Asian

or Euro make in flooring,treads of steps &

Landing laid on bed of 20 mm (Average) base of

cement mortar 1:6 (1 Cement : 6 Coarse sand) on

34 new surface or fixing on existing flooring by 100 1,397.83 S.M.

adhesive material including dismentaling of existing

flooring and jointed with colour cement slurry

including finished with flush pointing & cleaning

the surface etc. comp.Size 24" x 24" For Antiskid

Providing and laying Vitrified tiles 8 to 10 mm

thick, 24" x 24" in flooring treads of steps and

35 landing laid on a bed of 12mm thick cement mortar 25 1,040.35 Sqm.

1:3 (1 cement : 3 coarse sand) finishing with flush

pointing in white cement.

Providing and laying Vitrified tiles 8 to 10 mm

thick, 24" x 24" in skrting risers of steps and dedo on

10mm thick cement plaster 1:3 (1 cement : 3 coarse

sand) and jointed with white cement slurry.

Providing & fixing 35mm.th. Flush Door Solid

Double Core type Both Face water proof Ply

Vennered & 1.5 mm th.laminate shall be pasted

on both side with adhesives as specified by the

37 manufacturers. The laminate shall be as per approved 25 3,720.00 S.M.

shade & texture, of make incl. Sal wood frames of

finished size 12cm x 7cm.incl. S.S. Hinges with

nessary screws & Anodized aluminum fixtures &

fastenings For all Floor

38 Same as Above But Without Frame 10 2,520.00 S.M.

Providing & fixing 35mm.th. Indian teak wood

shutters for doors, windows & clearstory windows

incl. Indian teak wood frames of finished size

12cm x 7cm.incl. anodized aluminum fixtures & 10 5,533.68 S.M.

39 fastenings incl. Primer coat of approved quality &

two coats of oil painting etc. For all Floor (A) Fully

(B) Partly Panelled and Partely Galzed 10 5,185.03 S.M.

(C) Fully Galzed 5 4,551.69 S.M.

Providing and fixing 35mm thick shutters for

Doors, windows and clearstory windows including

anodised alluminium butt hinges with necessary

screws. (A) Indian teak wood. (i) Fully Panelled.

Providing and fixing FRP FRAME size 125 x 65 mm

and 35 mm thick FRP shutter with wood grain

raised panneled design finish shutter having extra

reinforcement on sides & edges in Gel coat finish. The

core of the shutter & frame is to be filed up with

injected polyurethene foam done in situ along with

embedded wooden pieces for stiffening & also taking

hinges & fixtures. The whole FRP frame & shutter is

to be water proof weather proof,termite proof

&resistance to mild acid/alkali. Rates are to be

inclusive of S.S.hinges with fastener sleeve &

alluminium fixtures & fastentings.

Providing & fixing M.S.Grills of required pattern to

wooden frames of windows etc. At all floor levels

with M.S. flats at required spacing & frame

42 around square or round bars with round headed 250 104.20 Kg.

bolts & round headed bolts and nuts or by screws

incl. Priming coat of Red lead paint etc. comp. (A)

Plain grill For all Floors

Providing & fixing in position collapsible steel

shutters with vertical channels 20 x10 x 2 mm.

Braced with flat iron diagonals 20 x5mm size

43 with top & bottom rails of T-iron 40x40x6mm. 25 5,865.10 S.M.

with 38mm dia. steel pulleys comp. with bolts,

locking arrangements, stoppers, handles incl.

applying a priming coat of Redlead paint etc. comp.

Providing and fixing M.S. Fan clamps type 1 to 16 mm

dia M.S. bar bent to shpe with hooked ends to RCC

slabs curing, layig including painting the exposed

portion of loops, all as per standard design complete.

Providing & laying ordinary C.C.1:1.5:3 mix for

R.C.C. work incl. boxing, centering, vibrating,

curing & mixed with approved water proofing

cement compound or "CEMWET"or"PIDICRETE

LW"integral water proofing admixture as water

proofing agent to be mixed with 50 kg. cement

bag shall be as recommended by the manufacture

of the water proofing material, concrete work for

top, bottom slab & side pardi for Under ground

Tank & Item incl. Necessary excavation & refilling

45 the available earth, 15 cm th' C.C 1:4:8 for bedding

concrete, Half B.M. in C.M. 1:4 outside wall, inside

R.C.C. pardi as per design, 10mm.th. water proofing

cement plaster in C.M. 1:3 with smooth

finishing,watering etc.Comp.to all inner face &

bottom of tank curing etc. comp. incl. Locking

arrangement, outlet, inlet, overflow & wash out

pipe arrangement as necessary & C.I. Cover 0.60 x

.045 weight not less then 35kg. etc. com. as per

structural drawing excluding Steel & as directed by

Engineer- in-charge

Underground tank 100 5.46 Lit.

Providing and filling in depressions of Bath and W.C.

At all floor levels, after completing plumbing work of

pans, pipes,traps etc.with cinder or fly ash as

directed by Engineer in charge etc. comp..

NOTE :- (1) The whole work is to be executed

through specialized agency with a guarantee of

(Ten) years given on a prescribed proforma duly

stamped (2) The rate shall include for work at all

floors & conducting water proof test as directed.

(A) Providing and laying water proofing treatment

to vertical and horizontal surfaces of depressed

portions of W.C.,kitchen and the like consisting of :

(a) I course of applying cement slurry @ 4.4 kg/sqm

mixed with water proofing compound conforming to

IS : 2645 in recommended proportions.

(b) II course of a layer of plaster in C.M. 1:3 with

water proofing compound confirming to IS:2645

about 25 mm. th' in the floor of the depression &

about 18mm th' On the side walls of the depression 25 296.00 S.M.

up to the floor level, water proofing plaster about

mm. th' be continued on the walls above the floor

level for a height of 600 mm. with surface suitable to

receive further treatment

(c) Finishing top with stone aggregate 10mm to

12mm nominal size spreading @0.008 C.M./S.M.,

thoroughly embedad in plaster layer.

as per specifications & instructions of Engineer in

charge (Cement consumption 0.316 Bags / S.M.)

(B) Providing and laying integral cement based

water proofing treatment including preparation of

surface as required for treatment of roofs, balconies,

terraces etc. consisting of following operations.

(a) Applying and grouting a slurry coat of neat

cement using 2.75 kg/sqm of cement admixed with

proprietary water proofing compound comforming to

IS:2645 over the R.C.C. slab including cleaning the

surface before tratment.

(b) Laying cement concrete using broken

bricks/brick bats 25 mm to 100 mm size with 50% of

cement mortar 1:5 (1 Cement : 5 Coarse sand) 50 511.00 S.M.

admixed with proprietary water proofing compound

conforming to IS:2645 ,brick bats is finally covered by

jointless cement plaster 20mm th. in C.M. 1:4 added

with special water proofing compound confirming to

IS:2645 & top smooth finished with trowel with false

chequered marking of 300 mm.size.The treatment is

carried along the vertical surface of the parapet &

other adjoining wall up to height of about 300 mm in

a shape of quarter round vata Incl. curing etc. Comp.

With average thickness of 120 mm and minimum

thickness at khurra as 65 mm.

(c) The whole terrace so finished shall be flooded

with water for a minimum period of two weeks for

curing and for final test. All above operations to be

down in order and as directed and specified by the

engineer-in-charge. With average thickness of

mm and minimum thickness at khurra as 65 mm.

(Cement consumption 0.511 Bags/ S.M.)

Proiding & laying water proofing treatment to

vertical and horizontal surfaces like consisting of (a)

I course of applying cement slurry 4.4 kg per sq.mt.

mixed with water proofing compound confirming to

IS:2645 in rcommended proportions. (b) II corse of

20mm cement plaster 1:3 mixed with water proofing

compound in recommended proportion (c) III course

of applying blown or / resideal bitumen applied hot

at 1.7 kg per sqm of area. (d) IV course of 400mm

micron th. PVC sheet. (Overlaps at joints of PVC sheet

should be 200mm wide and pasted to each other with

bitumen about 1.7 kg./ sqm.)

Providing & fixing G.I. Rain water spout of

mm.dia & 30 cm length etc.

Providing & fixing at all floor levels,both face

polished machine cut edge green kota stone slab

50 (30mm) for urinal partition joined with grey 5 900.00 S.M.

cement slurry (1:1) incl. Rubbing & polishing etc.

complete. (M.R.)

Providing & fixing at all floor levels,both face

polished machine cut edge Marble slab for

51 urinal partition joined with grey/White cement 5 1,050.00 S.M.

slurry (1:1) incl. Rubbing & polishing etc. complete.

(M.R.)( Basic Cost- Rs. 450/S.M.)

WATER SUPPLY AND SANITARY ITEMS

Prov.& Fixing water closet squatting pan (Indian

type W.C.pan) at all floor levels, size 580mm incl.

100 mm size "P'or "S" trap for water closet squatting

52 pan joining the trap with the pan & soil pipe in 15 1,401.60 No.

C.M. 1:1 (1cement :1 fine sand) etc. Comp.(A)

Vitreous china long pattern of approved colour For

Providing and fixing Wash Down Water closet

European type W.C. pan with integral P or S trap

including jointing the trap with soil pipe in cement

mortar 1:1 (1 cement : 1 find sand) (seat and

cover to be measured and paid for separately) (A)

Viterous china pattern - I (i) in approved colour

Providing and fixing plastic seat and cover for wash

54 down water closet with C.P. brass hinges and rubber 10 291.33 Each

buffers (B) Plastic seat and cover.

Providing & fixing wash basin with single hole for

pillar tap at all floor levels, with C.I. or M.S. Brackets

painted white incl. cutting holes & making good the

same incl. fittings such as pillar tap, capstan head

55 screw down high pressure with screws, shanks & 25 2,059.93 No.

back nuts, C.P. Brass waste trap, screw down stop

tap 15 mm. dia. etc. complete. (A) Vitreous china

flat back wash basin 550 mm.x 400 mm. size in

approved colour For all Floor

Providing & fixing Urinal or approved quality

including conecting the Urinal with waste pipe, tap

etc. complete. (A) White earthenware flat back or

corner type size 430 mm x 260mm x 350mm

Providing & fixing 600 mm.x 450 mm. mirror of

superior glass at all floor levels, mounted on 6 mm.

57 th. A.C. sheet or plywood sheet & fixed to wooden 5 833.73 No.

plugs with C.P.brass screws and washers etc. For all

Prov. & Fixing S.W. Gully trap with C.I.grating

brick masonary (C.M 1:5)chamber & water tight

C.I. cover with frame of 300mmx300mm size

(inside) with weight includ. plastering smooth 10 1,292.19 No.

inside & outside 15mm. th' in C.M.1:3 etc. comp. (i)

Square mouth traps---(A) 100mm x 100mm Size -P

(B) 150mm x 100mm Size- P Type 5 1,246.92 No.

Prov. & Fixing S.W. Gully trap with C.I.grating

brick masonary (C.M 1:5)chamber & water tight

Pre cast R.C.C. cover of 300mmx300mm size

(inside) includ. plastering smooth inside & outside 10 1,098.48 No.

15mm. th' in C.M.1:3 etc.

comp. (i) Square mouth traps---(A) 300mm x 300mm

(B) 150mm x 100mm Size- P Type 5 1,053.20 No.

Prov. & Fix. 10 cm.x15 cm.(4" x 6") S.W. trap with

Inside dimension ,455 x 610 mm & 450 mm deep

sewer trap chamber with 23 cm th' B.B. masonary

walls in C.M 1:5 with cement plaster 15 mm th' in

C.M. 1:3 inside & outside to exposed faces, R.C.C. top 15 3,155.63 No.

slab with 1:2:4 mix ( 1 cement: 2 Sand : 4 Grade stone

60 aggregate 20mm size) ,Foundation concrete 1:5:10 &

fixing C.I. cover with frame to be not less than 38 kg.

On top etc. comp. for single pipe.

.(A).Same as above but Precast RCC heavy duty Cover

instead of C.I. Cover

Extra for every additional depth of 0.1 mt beyoung

Providing & construction simple chamber of 23 cm.

th' B.B. Masonary in C.M 1:5 with cement plaster

mm th' in C.M. 1:3 inside & outside to exposed

faces, R.C.C. top slab with 1:2:4 mix ( 1 cement:

Sand : 4 Grade stone aggregate 20mm size) 5 2,932.93 No.

,Foundation concrete 1:5:10 & fixing C.I. cover

61 with frame to be not less than 38 kg. On top etc. comp.

Inside dimension, 455 x 610 mm &450 mm deep

for single pipe

(A) Same as above but Precast RCC heavy duty Cover

instead of C.I. Cover

Extra for every additional depth of 0.1 mt beyoung

Providing, Lowering & laying joining R.C.C. NP2

CLASS Pipe In C.M. 1:1 of following nominal

62 internal diameters incl. Testing of pipes and

joints etc. Comp

Providing & Fixing C.P. Brass screw down bib tap at

all floor levels, polished bright etc. comp.-(A) 15mm 10 186.83 No.

dia. For all Floors

Providing & Fixing gun metal check or non return

full way wheel valve at all floors levels, etc. 10 186.83 No.

complete. (A) 15 mm. dia.

Providing & Fixing chromium plated brass half

64 turn flush cock at all floor levels, of approved 15 263.77 No.

quality incl. fixing in pipe line etc. Comp.-- 25 mm dia.

Providing & Fixing abonite ball cock of approved

qualities directed etc. comp. (A) 25 mm. dia.

Providing and fixing C.I. Machinehole cover

66 x 0.45 mt. Size having weight not less than 35 Kg. 15 958.17 No.

Providing and fixing C.P. brass waste for washbasin

(A) 32mmdia. 10 67.91 Each

(B) 40mm dia. 5 89.83 Each

Providing & Fixing U-PVC pipe (SWR) confirming to

IS no. 13592 (Type "B") of

Prince/Supreme/Jain/Astral/Tulsi/Finolex

make for soil and waste discharge system at all 20 412.00 R.M.

68 floor levels incl. All fixtures like bends, tees, shoe etc.

jointed with resin of approved brand &

manufacture etc. comp. (M.R.) (a) 75mm Dia

Providing & fixing U-PVC pipes Confirming to IS

no. 13592 (Type "A") of

Prince/Supreme/Jain/Astral/ Tulsi/Finolex

make for rain water at all floor levels incl. 25 203.00 R.M.

69 fixtures like bends, tees, shoe etc joined with

resin of approved brand & manufacture etc. comp.

(M.R.) (A) 75 mm. Dia.

Providing, Laying and jointing on true line and level

UPVC pipe (SCH-40) line of

Prince/Supreme/Jain/Astral/ Tulsi/Finolex

make including fittings make or equivalent as

approved by angineer-in-charge. Pipe shall be fixed

on the wall the help of clamp at every two meter

C/C or shall be concealed as directed including

70 necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive solvent,

including cost of all materials.

Providing & Fixing P.V.C. pipes (SCH-80) of Prince/

Supreme/ Jain/ Astral/ Tulsi/Finolex make for

water supply line at all floor levels incl. fixtures

like bends, tees, shoe etc joined with resin of

approved brand & manufacture etc. comp. Pipe shall

be fixed on the wall the help of clamp at every two

meter C/C or shall be concealed as directed

71 including necessary fittings etc. including testing of

pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing and fixing PVC SWR Nahni trap IS

for drain - 110x110 mm diameter with jali of the

72 following nominal diameter of self cleaning design 10 558.36 NO

with C.I. scread down or hinged grating including the

cost of cutting and making good the walls.

Providing & Fixing in position PVC Cowl

vent to pipes of

73 Prince/Supreme/Jain/Astral/Tulsi/Finolex make

etc.Comp. (A) 75 mm. dia.

(B) 110 mm Dia. 5 50.00 NO

Providing & fixing M.S. Holder Bat clamps at all

floor levels of approved design to C.I. Or S.C.I

pipes including the cost of cutting holes & making

good the wall etc. Complete - 100 mm. dia. (M.R.)

Providing & fixing G.I./Aluminum Patti clamps at all

floor levels of approved design to C.I. Or S.C.I pipes

including the cost of cutting holes & making good

the wall etc. Complete - 100 mm. dia. (M.R.)

Providing erecting and fixing double coated

Sintex/Super/Reno PVC (ISI) mark water tank of

required capacity each with all necessary fittings

& connection etc. complete on terrace.

Providing & Fixing Kathi around the vertical PVC

drainage pipes for concealing with cement plaster

20 mm avg thickness(CM 1:3 [1 cement :3 coarse

sand]) finishing as per instruction given by Eng.

(A) 75 mm PVC PIPE 10 173.00 R.M.

(B) 100 mm /110 mm PVC PIPE 5 180.00 R.M.

Providing & fixing C.P. brass pillar cock with copper

78 connection, C.P.

brass screws complete

Make- Cera F2013101, Parry ware Cat. No.: G3102A1,

HindWare Cat. 10 1423.00 NO.

No.: F650003, Jaquar FLR-5011N

Providing & Fixing 15 mm Dia 2 way bib tap with

79 wall Flange at all

floor levels, polished bright etc. comp.

Make- Cera F2013163, Parry ware G4834A1,

HindWare Cat. No.: 10 1755.00 NO.

F530004, Jaquar FLR-5041N

Providing flush cock consisting lever, cartridge

80 sleeve & flange &

Make- Cera EXPOSED PART F2013751 &Concealed

part F4060101 , Parry ware T9824A1&T9823A1,

Jaquar FLR 5083 KN , CONCEALED BODY ALD- 5 2110.00 NO.

081,HindWare F280052 & CONCEALED STOP COCK

Providing & fixing 15mm C.P. brass angle valve

(Stop Cock) with

81 C.P. copper connecting pipe 450 mm long and nuts,

washer and brass flange complete, including cutting

and making good the wall where required.

Make- Cera F1020362, Parry ware T0712A1,

HindWare Cat. No.: 10 1432.00 NO.

F440020 F850094, jaquar CON 053 KN

Providing & fixing of overhead shower 80 mm (3”)

82 dia with 3 flow with Overhead Shower arm 200 mm

with wall flange complete

Make- Cera F7010602AB, Parry ware, Jaquar OHS-

1989 ,HindWare 5 1569.00 NO.

Cat. No.: F160144

Providing and fixing Towel Ring fabricated from

seamless stainless steel tube 2mm thick in bath room

with polished wall flange at end of bars with heavy

duty anchor fasteners & accessories.

Make- Cera F5014115CH, Parry ware F5014115CH,

Jaqua ACN- 1121N ,HindWare F880007

Providing & fixing S.S.towel rail of 600 mm long

approved make including, providing & fixing C.P.

brass screws, making holes in walls

Make- Cera F5015103CH, Parry ware F880005T,

Jaquar 1111BSM 5 1043.00 NO.

,HindWare F880005T

Providing & Fixing stainless steel recessed type Soap

85 dish of approved make. Including providing & fixing

screws, washers, cutting & making good the walls.

Make- Cera F5007106, Parry ware T6902A1, Jaquar

ACN-1131N, HindWare F880011

Providing Metropole Flush Valve Dual Flow 40mm

Size (Concealed Body)

Make- Cera F8010202 , Parry ware T3302A1 , Jaquar

FLV-1089NSQ, HindWare F860075

87 Providing Sink Cock with Regular Swinging Spout

Make- Cera F2008251 , Parry ware G3321A1 , Jaquar

FLR-5347N, HindWare F650013

ITEMS FOR COMPOUND WALL & OTHER MISC. I

Boring holes 3.5 mt.deep in ordinary soil ( for cast in

situ piles) & disposal of the surplus excavated soil

as directed within a lead of 50 M. For following

88 diameter of piles.

Providing & laying cement concrete 1:2:4 (1

cement:2 sand:4 graded stone agg. 20 mm nominal

size)& curing comp. Includ.cost of form work but

exclu. Cost of reinforcement for reinforced

concrete work in : (A) Foundation, footing, Base

of columns and Mass concrete.

Providing & laying ordinary cement con.1:2:4

(1cement: 2sand: graded stone agg. 20 mm

nominal size) finishing smooth curing etc. comp.

Incld. Cost of form work but excl. Cost of

reinforcement for R.C.C. Work in : Up to G.L./P.L.

(1)Having c/s area up to 0.08s.mt 2 12,123.79 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto

(3) Having cross sectional area more than 0.12 sq. mt. 2 8,692.87 C.M.

(1)Having c/s area up to 0.08s.mt 2 8,593.80 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto

(3) Having cross sectional area more than 0.12 sq. mt. 2 6,578.07 C.M.

Providing & laying C.C 1:3:6 (1cement :3 coarse sand

:6 crushed stone agg. 20 m.m Nominal size)&

curing comp. incl. cost of from work in: wall caps/

Steel work welded in built up sections, framed

work including cutting, hoisting, fixing in position

and applying a priming coat of red lead paint

(A) in beams & joists channels angles, tees, flats

with connection plates or angle cleats as in main

& cross beams,hip & trussed purlins connected to

common raffers & the like.

(B)For work like chain link fencing, above

compound wall etc.

(C)in trusses & trussed purlins upto 25m.Span

&15m.Overall height

Providing and fixing G.I. chain link of 50mm x 50mm

size x 10 guage thick with nuts, bolts, washer or G.I.

93 pins, excluding M.S. angles etc.complete as per 10 311.00 SM

relevent IS specification & directed by engineer in

charge. (TATA or Jindal Make)

Providing and fixing and fitting TATA or Jindal make

G.I. barbed wire fencing with necessary barbed wire

(12 x 14 guage, weight not less than 0.14 kg. / mt.)

pins, hooks, excluding M.S. angles etc. complete as per

relevent IS specification.& directed by engineer in

Providing & fixing colouron galvaniced steel, zinc /

aluminium allus coated sheet 0.5 mm. thick

roofing fixed with gslvanised grom J or L hook bolts

95 and bolt 8mm dia with bituman and impet washer 10 999.00 S.M.

filled with white lead etc. Excluding the cost of

purlins rafter and trusses. (Tata / Jindal or

Providing corrugated G.I. Sheets of class-3 roofing

fixed with glavanished iron J or L Hooks, Bolts and

nuts 8m diameter with bitumen and G.I. limpet

96 washer or G.I. limpet washer. filled with white 10 727.13 S.M.

lead complete excluding the cost of purlins,

Rafters and Trusses. (1) 0.80 mm thick sheet.

(Tata / Jindal or equivalent)

Providing corrugated G.I. Sheets of class-3 roofing

fixed with glavanished iron J or L Hooks, Bolts and

nuts 8m diameter with bitumen and G.I. limpet

97 washer or G.I. limpet washer. filled with white 10 1,016.00 S.M.

lead complete excluding the cost of purlins,

Rafters and Trusses. (1) 0.63 mm thick sheet.

(Tata / Jindal or equivalent)

Providing & fixing 150mm wide 450mm over all

semicircular plain G.I. sheet class-3 gutter with

98 iron brackets 40mm x 3mm size bolts, nuts, 10 561.27 R.M.

washers etc. including marking necessary connection

with rain water pipes. (i) 0.8 mm thick

Providing ridges or hips 600mm over all in plain

G.I. sheet fixed with G.I. "J" of "L" hooks bolts and

nuts 8mm dia G.I. limpet and bitumen washer

complete (1) 0.80 mm thick

Providing & fixing 150mm wide 450mm over all

semicircular plain G.I. sheet class-3 gutter with

100 iron brackets 40mm x 3mm size bolts, nuts, 5 412.00 R.M.

washers etc. including marking necessary connection

with rain water pipes. (i) 0.63mm thick

Providing ridges or hips 600mm over all in plain

G.I. sheet fixed with G.I. "J" of "L" hooks bolts and

nuts 8mm dia G.I. limpet and bitumen washer

complete (1) 0.63mm thick sheet

Providing & Fixing UV stabilise FRP Sheet roofing

with overlapping the main cladding on both edges. All

fixing holes must be predrilled oversize as specified

for the sheet length and fastener being used.

Fasteners must be fitted with approved washers.

Fixings should be tightened to ensure a weatherproof

seal but they must not be over tightened Side-lap

fasteners must also be installed at specified centers

with the FRP sheet having clearance holes provided

as per the main fasteners Weatherproofing shall be

provided at all flashing points under the normal

flashing by the fitting of a foam closure strip to match

the profile being used. Closure strips will be sealed to

the sheet with an appropriate non setting silicone

sealant. Excluding the cost of purlins rafter and

(a) 1.5 mm thick 10 992.00 SM

(b) 2 mm thick 10 1,100.00 SM

Providing & Fixing Polycarbonate sheet roofing

with surface of the sheet is coated with an anti-UV Co-

extrusion layer having good weather resistance, it

can maintain its optical properties and mechanical

performance for a long time. Fasting is usually done

by screws. , The fastening screws should be inserted

about 500 mm apart and 300mm apart Along the

supporting internal purlin and edge pulin.All fixing

103 holes with diameter at least 2 mm larger than screw

must be predrilled into each screw location. The

screws should be 6mm diameter with length

according to sheet thickness and corrosion resistant,

with at least heavy duty hot dripped galvanized or

stainless steel. Excluding the cost of purlins rafter and

(a) 1.5 mm thick Solid Sheet 10 1,261.00 SM

(b) 2 mm thick Solid Sheet 10 1,510.00 SM

Providing & Fixing 80 mm dia M.S. pipe as vertical

post are beded in 1:1.5:3 concrete also horizontaly in

line and connecting to purline angle etc by welding

rereting etc. (a) Medium duty "B" Class

Providing & Fixing 50 mm dia M.S. pipe as vertical

post are beded in 1:1.5:3 concrete also horizontaly in

line and connecting to purline angle etc by welding

rereting etc. (a) Medium duty "B" Class

Providing & fixing black board on walls of

1.8mt.x1.2mt size made up to 12 mmth.B.W.P

.Plywood (Brand Saras,Kitply,Uniply, Anchor,

Green,Wood Stock or century) fixed with teak wood

106 beading of 65 mmx 50mm size, rubbing & sanding 3 4,193.00 No.

comp., incl. applying two coats of black board paint

over a priming coat on plywood & French polishing

the frame all round etc. Comp. as per instruction

of Engineer in charge (M.R.)

Providing & fixing Green board on walls of

1.8mt.x1.2mt size made up to 18 mm th.ply (using

IS 710 Marin ply) with 1 mm thick outside green

board & 0.8mm backside white laminate & with

good Quality of adhesive with appropriate

fittings of Alluminium fittings or teak wood bedding

65 mmx 50mm size, rubbing & sanding comp., as per

instruction of Engineer in charge (M.R.)

Providing & fixing White board on walls of

1.8mt.x1.2mt size of 12mm thick with appropriate

fittings and Alluminium fittings comp., as per

instruction of Engineer in charge (M.R.)

Providing & Fixing Reading table size 8' x 4' and

height 2'-6" with table top 18mm thick (Brand

Saras,Kitply,Uniply, Anchor, Green,Wood Stock or

century) commercial plywood with 1.0mm thick

109 lamination sheet fitting with teakwood moulding 1 14,774.00 NO

table top supported on 3" x 3" teakwood leg & 3" x

11/2" teakwood framing top and bottom with french

polish labour work hardware etc. as per site in charge

instruction and as per drawing.

Providing & Fixing Librarian table with 18mm thick

commercial plywood (Brand Saras,Kitply,Uniply,

Anchor, Green,Wood Stock or century) )with 1.0mm

thick lamination sheet table top supported on 2" x 2"

110 teakwood leg & make 3 nos. drawers of 1' 3" width on 1 8,390.00 NO

both side with necessary french polish hardware

labour etc. as per site incharge instruction and as per

drawing ( Size 4' x 2'-6" x 2'-6", all framing other

then legs are teak wood of size 2" x 1")

Providing & Fixing simple 12mm thick commercial

plywood (Brand Saras,Kitply,Uniply, Anchor,

Green,Wood Stock or century) Rack of size 6' x4'

111 and depth 1'-6" 5 Nos. horizontal partition, 1 7,690.00 NO

supported 2" x 1" framing with necessary french

polish hardware labour etc. as per site incharge

instruction and as per drawing.

Providing & Fixing fitting commercial 8mm thick

plywood (Brand Saras,Kitply,Uniply, Anchor,

Green,Wood Stock or century) magazine stand of

Size 6' x 4' with 3" x 11/2" vertical supporting and

adjustable lag support and horizontal simple 2" x 1"

teakwood patti for magazine support with necessary

french polish hardware labour etc.as per site in

charges instruction and as per drawing.

Providing and fixing stainless steel ( Grade 304)

railing made of Hollow tubes, channels, plates etc.,

including welding, grinding, buffing, polishing and

making curvature (wherever required) and fitting

the same with necessary stainless steel nuts and

bolts complete, i/c fixing the railing with

necessary accessories & stainless steel dash

fasteners , stainless steel bolts etc., of required

size, on the top of the floor or the side of waist

slab with suitable arrangement as per approval of

Engineer-incharge, (for payment purpose only weight

of stainless steel members shall be considered

excluding fixing accessories such as nuts, bolts,

fasteners etc.).

Providing & fixing Z - clamps at all floor levels of

approved design to C.I. S.C.I. or PVC pipes including

the cost of cutting holes & making good the wall etc.

Complete - 100 mm dia as per architect instructions.

(A) 40 to 50 mm dia 2 62.00 No.

(B) 75 to 90 mm dia 2 75.00 No.

(C) 110 mm dia to upto 150 mm dia 2 90.00 No.

(C) 150 mm to 200 mm dia 2 98.00 No.

Providing and constructing sandwitch type Polish

Kota Stone cooking platform 0.6 mt. wide &

mt. height, including one end side Polish Kota stone

(Double Polish) of 1.25 mt. height & front Polish Kota

stone patti of 10 cm wide, vertical partitions of half

115 B.M. wall in C.M. 1:4 and 10mm th. plaster in 1:3 with 30 3,010.00 Rmt.

finishing smooth with cement slurry as required and

Stainless Steel sink of 0.45 mt x 0.45 mt size of

approved quality and make with required all fitings

& fixitures etc. comp as per instruction given by

site in charge at all floors.

Providing and constructing sandwitch type Granite

stone cooking platform 0.6 mt. wide & 0.75 mt.

height, including one end side granite stone (Double

Polish) of 1.25 mt. height & front granite stone

patti of 10 cm wide, vertical partitions of half

B.M. wall in C.M. 1:4 and 10mm th. plaster in 1:3

with finishing smooth with cement slurry as

required and Stainless Steel sink of 0.45 mt x

mt size of approved quality and make with required

all fitings & fixitures etc. comp as per instruction

given by site in charge at all floors.

(Basic rate of Granite Rs.1,200.00 / S.M.)

Providing and fixing 150 mm wide, approved quality

chicken wire mesh (FRP / PVC)at junction of brick

work and RCC work or two dissimilar surfaces, at all

heights fixed by nails, rowal plugs or tag by cement

mortar 1:3 before applying the plaster, including

curing, scaffolding all complete as directed.

Providing and filling Epoxy grout of approved

or suggested brand by consultant / Engineer in

charge in 4mm to 6mm thick tiles joint including

spacer with cleaning of joint by vacuum or blower etc

Providing and fixing rebar of following diameter

using chemical grout of Swanchore/Hilti/Fischer or

equivalent make including cost of all equipments,

tools, material, labour, etc. Standard

procedure as mentioned in manufacturer's

specifications shall be strictly followed, which

shall be submitted and got approved from the

authority prior to start of work. The rate shall also

include cost of drilling of hole of required

diameter and depth as mentioned in manufacturer's

specification, cleaning the hole with required air

blower and other necessary tools and tackles,

positioning, providing and grouting chemical, allied

fixtures and fasteners, etc. but excluding the cost of

reinforcing bar etc. complete. Item includes

necessary scaffolding, staging, labour, tools and

equipments, etc. complete as directed by the

engineer-in- charge.

Carring out plinth treatment to post construction

/ existing structure by spraying chemical solution

for termite control treatment including labour and

material consistment with ISI specification. Using

Chlordene and Chiorpurfiles 20 EC. As per

120 6131_paret-II Consentration Weight one percent 5 82.89 Smt.

is recommended i.e. one litre 20 EC chemical

emulsion with 19 liter give 1% concrentration

inclusive of one litre chemical emulsion appication at

the rate of 5 litre chemical / Sqm of surface is

recommended as per IS.

Providing and fixing rolling shutters of approved

make made of 80 mm wide M.S. laths inter locked

together through their entire lenght and jointed

together at the ends by end locks mounted on

121 specially designed pipe shaft with bracket plates, 3 3,503.41 Smt.

guide channels and arrangements for inside and

outside locking with push-pull operation including

the cost of hood cover and spring etc. complete (A)

Shutters having width below 3.5 M.

Providing and fixing rolling shutters of approved

make made of 80 mm wide M.S. laths inter locked

together through their entire lenght and jointed

together at the ends by end locks mounted on

122 specially designed pipe shaft with bracket plates, 3 4,495.02 Smt.

guide channels and arrangements for inside and

outside locking with push-pull operation including

the cost of hood cover and spring etc. complete. (B)

Shutters having width 3.5 M and above

Providing & Fixing 3 mm thick metal sheet with

CNC cutting to fix it on vertical surface.Steel work

welded in built up sections, framed work including

cutting, hoisting, fixing in position and applying a

123 priming coat of red lead paint in beams & joists 3 2,677.00 Smt.

channels angles, tees, flats with connection plates or

angle cleats as in main & cross beams, hip & trussed

purlins connected to common

raffers & the like.

Providing and laying broken china mosaic flooring for

terrace using 12mm to 20mm broken pieces of glazed

tiles to be laid over cement mortar 1:3 to plain or

slope and to be tempered to bring mortar creme

out upto surface using white cement including

rounding off junctions and extending them upto

cm along the wall clearing with water and oxalic acid

etc. as directed.

Providing and Fixing Hollow steel Sections

Framed Work including Cutting, Hoisting, Welding

& Fixing in position Purlin, Main Chord etc. as per

Engineer- in-charge.TATA / JINDAL / ASIAN Make

Providing cement vata (10 cm x 10 cm size) quarter

126 round in cement mortar 1:1 including neat cement 10 23.68 Rmt.

finishing, watering etc. complete.

Apply two coats of putty and two coats of primer of

approved brand and manufacture on new wall

127 surface to give an even shade including 50 40.59 S.M.

thoroughly brushing the surface free from mortar

dropping and other matter and sand papered smooth.

Wall painting (two coats) with plastic

emulsion paint of approved brand and

manufacture on undecorated wall surface to give

an even shade including throughly brushing the 50 79.39 S.M.

128 surface free from mortar droppings and other

foreign matter and sand

papered smooth.

For every subsequent coat Extra over item no.above 40 33.72 S.M.

Painting two coat (excluding priming coat) on

new steel and other metal surface with

129 synthetic enemal paint, burshing to give an even 50 65.31 S.M.

shade including cleaning the surface of all dirt, dust

and other foreign matters.

Providing & applying two coats of weather shield

max paint (3 coats may be required in case of

darker colours.)of ICI Dulux or Apex Ultima of

Asian Paint including applying exterior acrylic

primer coat as per manufacturers specification and

directions in shade and colour approved by

architects, on exterior surfaces of the building

including scaffolding, preparing the surface,

watering, curing etc. complete and as directed by

the architects and manufacturers.

Surface Preparation :

surface is thoroughly clean, dry and free from all

loose dirt, chalk, grease, fungi, algae and flaking

130 paint. This can be achieved by brushing with a wire/ 100 82.00 S.M.

stiff coir brush, followed by water jetting if

required. Fill up all minor cracks and defects with

white cement and sand mixture in the ratio 1:3. For

application on previously painted wall, previous

coatings of paint must be thoroughly scraped off

and Clean the surface thoroughly using wire

Apply a liberal coat of exterior acrylic primer and

allow it to dry for 4-5 hours. Application of putty is

not recommended.

Minimum 4-6 hours duration is required between

each coat of weather shield max paint

Providing and fixing window having extruded

aluminum Colour anodized section frame main outer

size 127mm x 38.10mm x 1.35mm @wt. 1.384kg/m,

horizontal Four track member size 122.20mm x

31.75mm x 1.10mm@ wt 1.205 kg/m, vertical

member of size 122.20mm x 31.75mm x 1.50mm

@1.398 kg/mt with sliding shutters of horizontal

member size 40mm x 18mm x 1.29mm@

0.456kg/mt ,vertical member of size 40mm x 18mm x

1.29mm @ 0.456 kg/mt with 5 mm thick transparent

bronze colour tinted float glass with powder coated

aluminum fittings and fixtures and transparent

silicon sealant glass fixing to frame as per details

etc complete for window.

(A) Same as above but Colour anodized 10 2,140.33 S.M.

Providing and fixing window having extruded

aluminium Powder Coated section frame main

outer size 95 mm x 24 mm x 1.17 mm (of jindal

section no:2459 @ Wt. of 0.738 Kg/mt), horizontal

Three track member size 92 mm x 31.75 mm x

mm (of jindal section no;8688, @ Wt. 1.07 Kg/mt),

vertical member of size 92 mm x 31.75 mm x

mm (of jindal section no:8933, @ Wt. 1.06 Kg/mt)

132 with sliding shutters of horizontal member size 40 30 1,591.87 S.M.

mm x 18 mm x 1.29 mm (of jindal section no:8947 @

0.456 kg/mt), vertical member of size 40 mm x

mm x 1.29 mm (of jindal section no:8949 @ wt. of

0.456 kg/mt) with 5 mm thick transparent bronze

colour tinted float glass with powder coated

aluminium fittings & fixtures and transparent silicon

sealant glass fixing to frame as per details etc.

(A) Same as above but Colour anodized 30 1,591.87 S.M.

Providing and fixing window having extruded

aluminium Powder Coated section frame main

outer size 63.50 x 38.10 x1.95 mm (of Jindal

section no.4605, @ Wt. 1.094Kg/mt) horizontal

Two track member size 61.85 mm x 31.75 mm x

mm (of jindal section no:8687, @ Wt.

Kg/mt.) vertical member of size 61.85 mm x

mm x 130 mm (of jindal section no:8758 @ wt.

of 0.659 kg/mt) with sliding shutters of horizontal

member size 40 mm x18 mm x 1.29 mm ( of

jindal section no:8949, @ Wt. of .456 Kg/mt) vertical

member of size 40 mm x 18 mm x 1.29 mm (of jindal

section no:8947, @ Wt. of 0.456 Kg/mt/section

@ Wt. of 0.457 Kg/mt) with 5 mm thick tranparent

bronze colour tineted float glass with powder

coated aluminium fittings and fixtures and

transparent silicon sealant glass fixing to frame as per

details etc. complete for window.

(A) Same as above but Colour anodized 30 1,705.67 S.M.

Providing and fixing standared extruded

ofalluminium section of size 63mm x 38.10mm

x1.2mm , @ Wt. 0.643 Kg/mt with colour Powder

Coated alluminium frame for ventilation with

mm thick frosted glass as details etc complete for

(A) Same as above but Colour anodized 10 2,414.00 S.M.

Providing and fixing standared extruded of

aluminium section of size 61 x 37.0 x0.90 mm (of

Jindal section no.14080, @ Wt. 0.471 Kg per mt)

135 with Powder Coated alluminium frame with 5 10 2,336.00 S.M.

mm thick transparent bronze colour tinted float

details etc. complete for fix window.

(A) Same as above but Colour anodized 10 2,336.00 S.M.

Providing & fixing partly panel & partly glass Powder

Coated Aluminium doors with aluminium section of

Hindalco, Jindal , Narmada,Banco or Equivalent

approved make having Poder Coated outer frame

Leg Partition section of 63.50 mm x 38.10 mm

having weight 1.158 kg. / R.M. shutter section having

size 83.5 mm x 44.45mm ( top & bottom:

136 kg./rmt. and middle 1.139 kg./rmt.) door vertical 10 3,237.00 S.M.

47.62mm x 44.45 mm ( vertical:0.881 kg./rmt. & top

hing side:0.974 kg./mt.), Glazing Clip (Jindal Section

No. 19370 Wt. 0.109 Kg./ Mt.) with 5mm thick sheet

glass in acid frogting and 12 mm thick prelaminated

sheet of Greenlam, Panama or archid make as

approved by Engineer-in charge including fixing

brass pivot, handle, lock etc. complete.

(A) Same as above but Colour anodized 10 3,237.00 S.M.

Providing & fixing Powder Coated Aluminium

partly glazed and partly panelled partition using

medium duty sections of Hindalco,Zindal,

Narmada, Banco or Equivalent approved make

having section 63.50 mm x 38.10mm ( Frame-.758

kg/rmt & Middle section- 0.819 Kg./rmt), Galzing

Clip with 5 mm thick clear float glass of approved

137 make including all other necessary fittings and 10 2,400.00 S.M.

fixtures. Entire work will have to be made water

proof using necessary rubber sectioned wherever

required. Gaps all round the frame to be filled with

approved water proof sealent. Bottom portion of

doors both side to be covered with 12mm thick

prelaminated particle board of approved make and

quality and as per design.

(A) Same as above but Colour anodized 5 2,400.00 S.M.

Demolition including stacking of serviceable

138 materials with all 3 1,057.47 C.M.

lead and lift. (i)) RCC Work

Demolition of brick work and stone masonry

including stacking of serviceable materials and

disposal of unserviceable materials with all lead and

lift. (i) On Cement Mortar.

Removing and scraping of old deteriorated plaster of

any thickness from wall / RCC member including

stacking of serviceable material and disposal of

unserviceable from site of work with all lead and lift.

Dismentling steel work including distempering and

141 stacking 5 3.67 Kg.

the maerials with all lead and lift.

Dismentling door, windows, ventilators etc. (wood or

steel) shutters including chowkhats architraces,

142 holdfasts and other attacement etc. complete and 3 187.71 EACH

stacking them within all lead and lift.

(i) Not exceeding 3 Sq.M. in area.

Dismentaling of sheet roofing inlcuding ridges, Hips,

Valleys, Gutters etc. stacking of serviceable materials

143 and disposal of unserviceable materials with all lead 3 47.72 S.M.

(i) G.I. sheet roofing.

144 Removing of Collapsible Gate 2 1,500.00 No.

145 Removing of Rolling Shutter 2 1,000.00 EACH

Dismentaling tiled of stone floors laid in mortar

including stacking of serviceable materilas and

unserviceable materials with all lead and lift.

A Kota stone flooring and steps 3 47.72 S.M.

B Marble 3 47.72 S.M.

C Tiles flooring / Dedo 3 47.72 S.M.

D Granite flooring and steps 3 47.72 S.M.

Providing & filling with Mix soil in layers of 20 cm.

147 Th'. Incl. watering, ramming & consolidation etc. 10 206.00 C.M.

Supplying & filling fine sand(pana) in 75 mm /

mm / 150 mm compacted thickness over the base

including necessary compaction, watering etc.

complete. Item includes leveling by using vibratory

plates compacted machine and as directed by

engineer in charge.

Providing and laying cement concrete 1:5:10 (1-

Cement : 5- Coarse sand : 10- hand broken stone

149 aggregates 40 mm nominal size) and curing complete 3 2,517.44 C.M.

excluding cost of formwork in (A) Foundation and

Providing 100mm thick readymade C.C. kerb of

strength M-20 (size 300mm x 380mm) purchased

from SMC's approved paverblock manufacturer &

setting in line, level and in truly vertical position,

including filling joints in C.M. 1:1 (1 part of cement :

part of stone dust) smooth pointing in C.M. 1:1 (1 part

of cement : 1 part of coarse sand) including watering

etc. complete and as directed by engineer in charge.

Providing interlocking type Rubber moulded

cement concrete paver block of approved shape,

design & colour having 60mm thickness (M-35)

purchased from SMC's approved paverblock

151 manufacturer only & fixing of fine sand bedding. Item 100 524.00 S.M.

includes levelling by using vibratory plates

compacted machine. Item also includes all materials,

labour, equipments, tools, plants, watering, cleaning

etc. complete.(With colour)

Without colour 70 524.00 S.M.

Providing & laying Granular sub base

(GSB)confirming to Grading-V of Table 400.0 of

compacted thick of 150mm with specified graded

stone metal and sand mixed in place and laid with

mechanical means spreading with motor grader

and compacting with vibratory roller having

minimum 80-100 KN static weight to acheve

desired density of 98% of MDD including all

material, labour, machinery with all leads and lift etc.

Providing & laying cement concrete Pavement using

1:1.5:3 (1 cement:1.5 sand:3 graded stone agg.

153 mm nominal size) & Vaccuum Dewatering 10 5,981.00 C.M.

technique including floating surface with a skim

powder floater, curing etc. complete.

Providing & laying cement concrete Pavement using

1:2:4 (1 cement:2 sand:4 graded stone agg. 20 mm

154 nominal size) & Vaccuum Dewatering technique 5 5,245.25 C.M.

including floating surface with a skim powder floater,

curing etc. complete.

Providing and laying 200 micron plastic sheet on

prepared sub base For V.D.S Concrete

Cutting of Groove 5 to 7 mm thick in VDS for depth

156 1/3 of total thickness with filling of epoxy sealent as 10 50.00 R.M.

directed by engineer in charge

RCC Core Cutting is about making precise, circular

cuts for creating holes of required diameters for

Rehabilitation in civil works. The core drilling rod is

fitted with diamond pieces at the drilling end. The

core cutting machine can be used for both horizontal

and vertical hole making purposes.

Providing and fixing eco-friendly light weight

calcium silicate false ceiling tiles having Tegular

edge & 15 mm Thick Densified edges on the Tile

Periphery for Extra Strength The Light weight

calcium silicate ceiling tiles shall have , light

reflection 85% non-combustible as per B.S.

part IV, 100% humidity resistance and also having

thermal conductivity0.043° w/m KC.for the best

thermal Insulation . The Light weight calcium

Silicate tile shall be of approved texture Fine

fissured/ Spintone/Cosmos having NRC value of

0.5 & Globe having NRC value of 0.75 NRC or

equivalent of size 595 X 595 mm to be laid on true

158 horizontal level suspended inter locking metal

grid of hot dipped galvanized steel sections

(galvanizing @120 grams per sqm including both

side) consisting of main ‘T’ runner suitably spaced at

joints to get required length and size of

24X38mm made from 0.30 mm thick (minimum)

sheet, 1200mm centre to centre, and cross ‘T’ of size

24X28mm made out of 0.33mm (Minimum) sheet

spaced 1200mm along spaced between main ‘T’

at 600mm centre to centre to form agrid of

1200X600mm and secondary cross ’T’ of length

600mm and size 24x28mm made of 0.30 mm thick

(Minimum) sheet to be interlocked at middle of

the 1200X600mm panel to form grid of size

600X600mm resting on periphery walls/partitions 8 1648.96 Sqm.

159 GYPSUM CEILING 5.00 958.58 Sqm.

Supplying and Fixing of Suspended ceiling system

components which includes Single Layer Boarding

with 12.5mm thick USG Boral Standard Plasterboard

This includes of USG Boral Thundersteel Perimeter

Channel (0.50mm thick having one flange of 20mm

and another flange of 30mm and a web of 28mm)

screw fixed to brick wall/partition with the help of

approved screws at 600mm centers. Then

suspending of USG Boral Thundersteel Intermediate

channel (45mm x 0.90mm thick with two flanges of

15mm each) from the soffit at 1220mm centers with

of USG Boral Thundersteel Ceiling Angle

(25x10mmx0.50mm thick) fixed to RCC Slab with of

USG Boral Soffit Cleat (37x27x25x1.6mm thick) and

8mm dia 40mm long Anchor Fastener @ 600mm

Centers, respectively. USG Boral Thundersteel Ceiling

Section (having web of 51 mm and two flanges of

27mm each) are then fixed to the of USG Boral

Thundersteel Intermediate channel with the help of

connecting clip (2.6mm Dia) and in perpendicular

direction to the USG Boral Thundersteel intermediate

channel at 457mm centers. USG Boral Thundersteel

profiles are rolled with AZ Steel (150 GSM & 310 MPa

Yield Strength) having base metal conforming to IS

1397:2001).12.5mm thick USG Boral Standard

Plasterboards (confirming to IS 2095 Part 1) is screw

fixed with 25mm long Drywall screws at 230 mm

160 CEMENT SHEET CEILING 10.00 1248.00 Sqm.

Providing and fixing of Cement sheet ceiling using

aluminium channel & pipe, screws etc. complete with

all material, labour with all lead, lift and transport.

and finished by approved shade of plastic paint

(Basic Rate for 8 mm plain cement sheet :

rs./sqft.)and finished and complete the work

satisfactorily as per instruction of architect or

Engineer-in charge And as per " Architecture" detail.

Providing and fixing

(A) 40 mm thick RCC cover for simple

chamber,s.w.trap & tank Top

(B) PVC water tank cover upto 2000 Lit. 5.00 200.00 No.

Providing and Replace door, Window S.S. Fixtures fix

in wooden / Alluminium door - window

(A) S.S. Stopper 60 Cm long of ASIS 304 2.00 363.77 No.

(B) S.S. Stopper 30 Cm long of ASIS 304 2.00 182.32 No.

(C) S.S. Stopper 20 Cm long of ASIS 304 2.00 127.53 No.

(D) S.S. Aldrop 20 Cm long of ASIS 304 Grade 2.00 218.26 No.

(E) S.S. Aldrop 25 Cm long of ASIS 304 Grade 2.00 327.83 No.

(F) S.S. Aldrop 30 Cm long of ASIS 304 Grade 15.00 400.58 No.

(G) S.S. Handle for door/ window 10 Cm size of ASIS

(F)S.S. Handle for Door 15 Cm size of ASIS 304 Grade 15.00 76.17 No.

(I) S.S. Pipe Handle for door 30 Cm size o ASIS

(J) Inter Lock [Kadaka lock] 2.00 209.71 No.

(H) Locks Godrej Mortice lock cover 2.00 329.63 No.

(I) Door closers arrow type with spring 12 length as

approved sample (30 cms)

(J)Handle for doors Windows Cupboards etc. Brass

(K) S.S. Door / window hinges 4x1"x1" 2.00 54.78 No.

Providing & fixing water proof plywood (ISI marks

710 grade) at the door,window and any space in the

building. necessary hardware, screws materials etc.

complete as per instruction by engineer in charge.

Providing & laying Non reflective solar contact film

164 for fixing on glass as approved colour,design,cutting 7.00 406.57 S.M.

complete as per instruction by engineer in charge.

Providing & fixing Glass Table Top using 08mm

th.clear glass with crystal edge & necessary hardware

materials etc. complete as per instruction by engineer

Removing & resetting existing readymade c.c. kerb

stone of required size & thickness in line .level and in

truly vertical position including filling joints in C.M.

166 1:1 (1 part of cement : 1 part of stone dust) smooth 50.00 56.00 R.M.

pointing in C.M. 1:1 (1 part of cement : 1 part of

coarse sand) including watering etc. complete and as

directed by engineer in charge. (M.R)

Removing and Resetting of Paver block of walk-way

with necessary sand / pana filling and make in line

and level with necessary vibrating using compactor

Providing and fixing hard drawn steel wire fabric

75mmx25mm mesh or weight not less than

kg.per Sq.M. to window frames etc. including 60x

20mm beading of teak wood.

Providing & fixing G.i mesh 25X25X3mm used for

celling repair fixed with celling rebar column as per

directed by enginner incharge rate excluding the

Providing and filling the expansion joint by polymer

confirm to BS4254-1983 as per required shade and

specification by making groove of 50 mmx12.5mm

170 lather by cutting or by repairing groove and

removing mortar dropor anyother foreign materials

including applying primer and filling required size

(over size of joint PU foam etc. complete.)

Cutting out cracks of roof terrace to V- section

171 cleaning out, wetting , grouting with cement and 200 65.23 Rmt

sand slurry 1:3 (1-cement 3-sand )

Cutting out cracks roof terrace to V-Section

172 cleaning out and filling solidly with a hot mixture 150 76.04 Rmt

of bitumen and clean dry sand (1:1 by weight)

Anti-Termite System:Providing and laying of

permanent piping technology anti-termite

treatment before flooring work by installing LLDP

(Low linear density polyethylene) tube of 8 mm

O.D. & 6.4 mm 1.D. with inbuilt pressure

compensation chip every 30 cm interval in the

tube, having working pressure of 2 Kg/cm2 and

release rate of 1.9 Itr/hour fixed by P-clips and

nails. The LLDP pipe shall be installed at the entire

periphery of the building and at internal network

of building at a depth of 20 to 200 mm under floor at

every 2 to 3 mtr. c/c distance (adjusted as per

173 building layout ) & Ends of loop pass through a 75.00 134.33 S.M.

PVC elbow of minimum 32 mm ID at junction box of

wall and floor level, entering into a steel

reinforced grooved flexible pipe of minimum

mm ID leading into junction box and the loops

shall terminate in junction boxes & test every

junction during injecting chemicals for termite

control treatment. The anti termite chemical

Imidacloprid 30.5% SC mix as per IS-6313 (part III)

shall be injected by the pressure pump diluted

with water @ 10.5 ml/5 ltr of water at the rate of

Kg/sq.cm @ 5 Ltr/SMT. The contractor shall

submit approved line plan for piping system and

junction boxes dully approved by Engineer-in-

Layer-1: (Liquid Form) White Cement, SBR (Dr. Fixit),

Bulbond (Synthetic Resin Adhesive), Crack Sill

Powder, Asian Paint, Smart Care Damp Proof Water.

Layer-2: (Liquid Form) Asian Paint, Bulbond (

Synthetic Resin Adhesive), Crack Sill Powder, Smart

Care Damp Proof, Water etc. Layer-3(Finishing

Layer): (Liquid Form) Asian Paint, Smart Care Damp

Proof, Water etc.

Labour Charge For Scrubbing, Cleaning, Crack Filling

Proofing Work at Wall Area including Scaffolding &

Decorative Wall Painting

Decorative wall paintings with designing, painting at

place with all neccessary materials.

Slogan writing on walls designing, painting at place

with all neccessary materials.

Note :- G.S.T Will be Paid Extra On Above Mentioned Price As Per Applicable Government

SIGNATURE OF CONTRACTOR EXECUTIVE ENGINEER

NORTH ZONE ( KATARGAM )

SURAT MUNICIPAL CORPORATION