REPAIR TO FALSE CEILING, FLOORING, SANITARY FITTINGS AND JOINERY FITTINGS IN BLDG NO 51, BLDG NO 28, OFFRS MESS, MES OFFICE, AFWWA SHOPPING COMPLEX AND BSO YARD AT BARRACKPORE UNDER GE (AF) BARRACKPORE

Amount

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards / slabs / blankets any thickness, including cover fillet complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n.exc. 15cm thick (below or above ground level) and removal of rubbish from the site complete all as specified and as directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing ) and rubbish off the premises complete all as specified and as directed.

Demolition of brick work or stone boulder masonry, built in cement mortar including all quoins, arches, pillars etc. including removing of unserviciable material from site complete all as specified and directed.

Taking down steel rolling shutter of any description and size of opening exc 3 sqm but n.exc 6 sqm including all components and parts (except guide channel and bracket plates) from position including greasing and oiling all parts and re-assembling all parts and refixing in the same opening complete all as specified and as directed.

Dismantling of boarding, any description, fixed in any position complete all as specified and directed.

Dismanting of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

Taking down cement plaster of any description built in cement mortar on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc. and removing debrish from site complete all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided and removing materials from site complete all as specified and as directed.

Material and labour for precast cement concrete (1:2:4) type B0 (12.5 mm graded agregate) louvres and jallies, 25mm thick (measured solid), including all mould- ings set jointed and pointed in cement mortar (1:4) including necessary formwork after demolition of old existing unserviciable louvres and jallies complete all as specified and directed.

Material and labour for brick work with fly ash bricks, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.

Resecuring or easing and adjusting without taking down door shutters for easy closing / opening, end tightening of butt hinges in position, adjustement of butt hinges in position, adjustement of existing iron mongry, size of shutter exc 1 sqm and n. exc 2 sqm each complete all as specified and directed.

Repair/adjusting aluminium door/windows for holding in position to shutters in frame including replacing of old damaged adjusting bolts, cleats, rubber gas-kits, screws and aluminium sections less than 1kg for each shutters and making proper functionable to aluminium doors/windows complete all as specified and directed.

Material and labour for well-seasoned 2nd class hard wood plain fillets, square, rectangular or triangular in section, wrought, secured with nails or brads, sectional area exc. 13 sqcm but not exc. 25 sqcm complete all as specified and as directed.

Supply and fix 5mm thick PVC sheet fillet of width 35 mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified and directed.

Supply and fix solid PVC wall lining consisting of 5 mm thick wood grain printed colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed.

Supply and fix in repair 25mm thick solid PVC board exterior grade fixed to frame with leaping as in shutter, shelves of cup board or in kitchen cabinet etc complete all as specified and directed.

Suplly and fix in repair 100mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

Suplly and fix in repair stainless steel 100mm size butt hinges, medium weight complete all as specified and directed.

Suplly and fix in repair 150mm long aluminium handles, cast type, anodized complete all as specified and directed.

Suplly and fix in repair 150 mm long aluminum anodised barrel tower bolts cast type complete all as specified and directed.

Supply and fix in repair mild steel 300mm long ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed.

Suplly and fix in repair 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy complete all as specified and directed.

Suplly and fix in repair 100 mm long Mortice latch with two levers (vertical type), brass body complete all as specified and directed.

Supply and fix galvanised steel wire cloth, 0.56mm nominal dia or wire and average width of aperture 1.00mm and fixed with stainless steel wire staples complete all as specified and directed.

Supply and fix in repair galvanised steel wire cloth, 0.56mm nominal dia or wire and average width of aperture 1.00mm and fixed with stainless steel wire staples complete all as specified and directed.

Supply and fix in repair stainless steel 20mm dia curtain rod fancy type including fixing brackets and knobs fixing at end of pelmet or brick/concrete wall with screws complete all as specified and directed.

Supply and fix in repair safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed.

Supply and fix in repair ball bearing for rolling shutters complete all as specified and directed.

Supply and fix mild steel works as in hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Supply and fix 0.50mm thick pre-painted galvalume aluminium Zinc coating GI based corrugated / semi corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as per manufacturer instruction complete all as specified and as directed.

Refixing, securing, erecting only with self tapping screws including minor mason work and filling of holes etc with concrete and making good of existing 0.50mm thick pre-painted galvatume aluminium zinc coating GI based plain/corrugated steel sheet as in roof covering/cladding to wall or in any position and in patch works complete all as specified and directed.

Material and labour for welding in repairs n. exc 2.5cm in length, thickness of metal to be welded exc 6mm but n. exc 9mm at any position upto G+4 storey building complete all as specified and directed.

Supply and fix 4mm thick non asbestos fibre cement designer board conforming to IS-14862 type-B category-3 of ocean texture as in false ceiling with GI snap grid/section of size 600mm x 600mm fixed to wall hanging from soffits/trusses using adjustable supporting hanger comprising of 4mm dia MS rod or wire ‘J’ type hook, nuts, bolts, holding down clips with GI section of size 38mm x 24mm x 0.4mm (main tee) and 28mm x 24mm x 0.3mm (cross tee) and wall angle of size 24mm x 24mm x 0.3mm complete all as specified and directed.

Material and labour for 75mm thick PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in sub base of floor and paving etc complete all as specified and as directed.

Material and labour for 25mm thick PCC (1:2:4) type B-0 (using 12.50mm graded stone aggregate) as in levelling course for laying floor finishes complete all as specified and directed.

Material and labour for 40mm thick PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in floor and finished the surface even and smooth with using extra cement complete all as specified and directed.

Material and labour for vitrified ceramic tiles (premium quality) 10mm thick, light shade as approved, polished area of each tiles n. exc. 0.36 Sqm (square/ rectangular) in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

Material and labour for vitrified ceramic tiles (premium quality) 10mm thick, light shade as approved, polished area of each tiles exc. 0.42 sqm but not exceeding 1.00 sqm (square/ rectangular) in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

Material and labour for non skid ceramic coloured tiles (premium quality) 7 to 8mm thick (square or rectangular) area of each tile exc. 0.06 sqm but not exceeding 0.11 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

Material and labour for non skid ceramic coloured tiles (premium quality) 7 to 8mm thick (square or rectangular) area of each tile exc. 0.11 sqm but not exceeding 0.18 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

Material and labour for glazed ceramic coloured tiles (premium quality) of size 300x200x7mm / 450x300x7mm thick on walls as in dados/skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 10mm thick plaster in cement mortar (1:3) complete all as specified and directed.

Material and labour for joint free anti skid outdoor pavement coloured tiles (good grip series) of size 300 x 300 x 10mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 20mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

Material and labour for 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

Material and labour for 10mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar (1:6) and finish the surfaces even and smooth without using extra cement on wall complete all as specified and directed.

Material and labour for 5mm thick rendering on concrete surfaces in cement mortar (1:3) and finish the surfaces even and smooth without using extra cement in ceiling complete all as specified and directed.

Material and labour for 15mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar (1:4) and finish the surfaces even and smooth without using extra cement as in wall complete all as specified and directed.

Material and labour for preparation of new plastered surfaces of walls and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed.

Material and labour for preparation of new plastered surfaces of walls and applying two coats of acrylic washable distemper over a coat of alkali resistance primer complete all as specified and directed.

Material and labour for preparation of new plastered surfaces of ceiling and applying three coat of white wash complete all as specified and directed.

Materials and labour for complete removal of existing treatment on walls and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming one coat of exterior primer applied @ 0.90 litre/ 10 sqm including preperation of surface complete all as specified and directed.

Material and labour for preparation of old decorated surfaces of walls and applying one coat of acrylic washable distemper complete all as specified and directed.

Material and labour for preparation of old decorated surfaces of wall and applying one coat of white wash complete all as specified and directed.

Material and labour for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Material and labour for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Supply and fix 4 mm thick sheet glass ordinary quality and glazing with oil putty or wooden/ aluminium rubber beads, nails etc in square exc 0.5 sqm in each pane including hacking out old broken glass complete all as specified and directed.

Supply and fix 15 mm bore steel tubes medium grade, galvanised, with all fitting and fixed to walls, ceilings, roofs or laid in floors including taking down existing unserviciable GI pipe complete all as specified and directed.

Supply and fix 20 mm bore steel tubes medium grade, galvanised, with all fitting and fixed to walls, ceilings, roofs or laid in floors including taking down existing unserviciable GI pipe complete all as specified and directed.

Supply and fix in repair 15mm bore stop valves, cast copper alloy, fancy type, chromium plated with long shank and cup screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

Supply and fix in repair 15mm bore fancy type pillar tap cast copper alloy with capstan heads, chromium plated, screwed down, high pressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.

Supply and fix in repair 15mm bore fancy type, chromium plated, bib tap, cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified and directed.

Supply and fix in repair 15mm bore brass angle cock fancy type, chromium plated for iron pipe complete all as specified and directed.

Supply and fix in repair soap dish, brass chromium plated of approximate size 100x80 mm complete all as specified and directed.

Supply and fix in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

Supply and fix in repair 125mm dia stainless steel grating doom with waste hole complete all as specified and directed.

Supply and fix in repair vitreous china squatting pan of ‘Orissa pattern’, size 580 mm x 440mm (white) with ‘P’ or ‘S’ trap, front or back inlet and foot rests, any pattern complete including provision of PCC (1:4:8) type-D2 (using 20mm graded stone aggregate) bedding and connection to trap, flushing pipe, antisyphonage pipe, etc. including making good the disturbed floor complete all as specified and directed.

Supply and fix in repair top cover of over head PVC water storage tank of any capacity complete all as specified and directed.

Supply and fix MS tank cover with zinc coating, 500mm dia and 150mm height of spherical shape and gas welded spikes of 2mm dia and 75mm long at 50mm centre to centre of all surface in zig zag pattern and fixed with 50mm long medium weight MS butt hinges locked with 100 mm long hasp and staples fixed on existing PVC over head tank of any size complete all as specified and directed.

Supply, hoist and fix 500 litre capacity rotational moulded polyethylene water storage tanks three layered bearing ISI mark (cylindrical vertical with closed top) after dismantling of old existing tank complete all as specified and directed.

Supply, hoist and fix 1000 litre capacity rotational moulded polyethylene water storage tanks three layered bearing ISI mark (cylindrical vertical with closed top) after dismantling of old existing tank complete all as specified and directed.

Supply and fix in repair 20mm dia ball valve high pressure high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gm) complete all as specified and directed.

Supply and fix in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

Supply and fix in repair stainless steel plate rack 0.85mm thick of size 1050x600x250mm complete all as specified and directed.

Supply and fix in repair triple door corner cabinet with PP and PPCP material of size 848x343x250mm fixed on wall complete all as specified and directed.

Supply and fix in repair vitreous china white wash down water closet pan (pedestal pattern) with ‘P’ or ‘S’ trap, front or back inlet, fixing bolts and making all necessary connections complete as specified and directed.

Supply and fix in repair 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe complete all as specified and directed.

Supply and fix in repair vitreous china wash hand basin, white, flat back, size 550x400mm excluding taps, waste pipe, chain & plug and porcelain stopper but with brackets and 32 mm bore CP brass waste fittings including cutting for and pinning in ends of brackets complete all as specified and directed.

Supply and fix in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints etc fixed to walls or laid in trenches complete all as specified and directed.

Supply fix in repair 32mm dia PVC waste corrougated pipe 800mm long complete all as specified and directed.

Supply and fix in repair PVC connection pipe 15 mm size with PTMT nuts at both ends of length 600 mm complete all as specified and directed.

Supply and fix in repair 110 mm bore PVC (SWR) junction single, (single T) equal or unequal with access door complete all as specified and as directed.

Supply and fix in repair 110 mm bore PVC (SWR) bends any radius with access door complete all as specified and as directed.

ROY CONSTRUCTION

CHANDRA CONSTRUCTION AND CO

TAPAS ENGINEERING CO

PIONEER

Das and Brothers

BANERJEE CONSTRUCTION

R K CONSTRUCTION