Construction of Additional Accommodation to Inspection hut / Rest house at Dehar in Tehsil Sundernagar

Amount

Excavation in foundations, trenches etc.in earth work in all kinds of soil such as pick work, jumper work, blasting work, saturated soil , including chieslling or any other mixed variety of soil, dewatering and or removal of slush and other incidentals, lift up to any heights, stacking the excavated soil upto any leads clear from the edge of excavation and then returning the stacked soil in 15 cm ( fifteen centemetre) layer when required in to plinth sides of foundation etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth including carriage of materials with in all leads, lifts and other incidentals complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Excavation in drain and channel etc . in earth work in all kinds of classification of soil , viz pick jumper , blasting work , hard blasting work including chiseling / wedging out site of rock including dressing of sides, beds and disposing of excavated earth up to any distance and lift and disposed earth to be levelled and neatly dressed as per direction of Engineer- in – charge including carriage of materials with in all leads,lifts, and other incidentals .

Filling in plinth with sand under floors including watering ramming, consolidating and dressing complete including carriage of materials with in all leads, lifts and other incidentals complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and laying cement concrete 1:4:8 (one cement: four sand: eight graded stone aggregates 40mm (forty millimetre) nominal size) and curing complete excluding cost of form work in foundation and plinth including carriage of materials with in all leads, lifts and other incidentals..

Random rubble masonry/polygonal rubble masonry (Uncoursed/brought to courses) with hard stone of approved quality in foundation and plinth including levelling up with cement concrete 1:6:12 (one cement : six Sand : twelve Graded stone aggregate 20mm ( twenty millimetre ) nominal size in cement mortar 1:6 (one cement: six sand) in breast walls and retaining walls including all leads and lifts and carriage of materials and other incidentals.

Boulder filling dry hand packed tightly under floor including carriage of materials with in all leads, lifts and other incidentals.

Stone work ashlar punched (ordinary work) in super structure upto floor any level in cement mortar 1:6 (1 cement:6 sand) inlcuding pointing with cement mortar 1:2(one cement : two sand) including carriage of materials with in all leads, lifts and other incidentals.

Square rubble masonary coursed with hard stone of approved quality in foundation and plinth in Retaining walls/Breast walls including rakingout joints in in Cement Mortar 1:6 (one Cement: six Sand) including carriage of materials with in all leads, lifts and other incidentals.

C/o Dry rubble masonry in breast wall and retaining walls revetment walls and parapets etc. including carriage of materials with in all leads, lifts and other incidentals.

Providing form work with steel plates 3.15mm ( three point one five millimeter) thick welded with angle iron in frame 30x30x5mm (thirty X thirty X five millimeter) so as to give a fair fISIsh including centering, shuttering, strutting and propping etc. with wooden battens and ballies for all height / depth of propping and centring below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work :

Beams, cantilevers, girders and lintels, side and sofits of beams, beam haunchings cantilevers girders bressumers and lintels upto any depth / length depth in all height in all floor level including carriage of materials with in all leads, lifts and other incidental complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Flat surfaces such as soffits of suspended floors, roofs, landing and the like floors etc. upto all thickness including carriage of materials with in all leads, lifts and other incidentals complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Edges of slabs and breaks in floors and walls upto any width in all floor level including carriage of materials with in all leads, lifts and other incidentals complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Vertical surfaces such as walls (any thickness) partitions and the like including attached pillastersb buttresses, plinth and string courses and the like including carriage of materials with in all leads, lifts and other incidentals complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Stair case with slopping or stepped soffits , excluding landing but including carriage of materials with in all leads and lifts complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and laying reinforced cement concrete design mix M-20 ( twenty ) grade mechanically mixed and vibrated and curing complete excluding cost of form work and reinforecement for reinfoced cement concrete work . The mix shall be designed as per requirement of I.S code and PWD specification . The design mix will be got approved from the Engineer - in - charge prior to the casting . The theoritical consumption of cement for the item shall be worked out as per approved design mix as per I.S code .

Walls (any thickness but not less than any metre thickness) including attached pilasters buttersses,plinth and string courses etc. from top of foundation upto floor any level with in all leads, lifts and other incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Suspended floor roofs, landing and shelves and their supports balconies beams, girders , bressumers and cantilevers upto all floor level including carriage of materials with in all leads, lifts and other incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Stair cases (except spiral stair case) excluding landing but including preparing of the surface and fISInhing of nosing up to all floor level including carriage of materials with in all leads, lifts and other incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and laying cement concrete 1:2:4 (one cement : two sand : four graded stone aggregate 20mm ( twenty millimetre ) nominal size) and curing complete including form work in Moulding as in cornices, window sills etc. not exceeding 15cm.( fifteen centimatre ) in girth including carriage of materials with in all leads, lifts and other incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing Tor steel reinforcement for R.C.C. work including bending, binding and placing in position including cost of binding wire complete upto all floor level including carriage of materials with in all leads, lifts and other incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Second class brick masonry in common burnt clay building bricks in super structure up to all level in cement mortar 1:6 (one cement : six sand) and curing compelete including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Second class half brick masonry in common burnt clay building bricks in super structure above plinth level up to all level in cement mortar 1:4 (one cement : four sand) and curing complete including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing woodwork in frames of ors,windows,clerestory, windows and other frames wrought,framed and fixed in position First Class Indian teak wood including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing flush door shutters decorative type core of block board construction with frames of first class hard wood and well matched first class indian teak plyveneering with vertical grains or cross bends and face vencering on both faces of shutter. 40mm ( forty millimetre ) thick including black enamelled M.S. butt hinges including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws 35 mm ( thirty five millimetre ) thick 2nd class Indian teak wood. including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85 G. with wire of dia 0.56 mm ( zero point fifty six millimetre ) for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws 30mm( thirty millimetre ) thick 1st class india teak wood including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing 19mm ( nineteen millimetre ) thick Commercial Board water proof shutters for cup boards including fixing with nickel plated piano hinges with screws etc complete) including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing square edges cover fillets (beading) 19mmx6mm ( nineteen x six millimetre ) section including mitring at junctions with wood screws and nails complete.1st class deodar wood including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

15mm (fifteen millimetres) cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering upto floor all level including arrises,internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth. Cement Mortar 1:4 ( one cement: four sand) including carriage of materials within all leads , lifts of material and other incidentals .

15mm (fifteen millimetres) cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering upto floor all level including arrises,internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth. Cement Mortar 1:3 ( one cement: three sand) including carriage of materials within all leads , lifts of material and other incidentals .

15mm ( fifteen millimetres) cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth. Cement Mortar 1:4 ( one cement: four sand) including carriage of materials within all leads , lifts of material and other incidentals .

6mm thick cement plaster to ceiling in cement mortar 1:3 (one cement :three sand) as per specification as per direction of Enginer - in - charge including carriage of materials with in all leads, lifts and other incidentals..

Providing and fixing FULL BODY Vitrefied tiles 10mm ( ten millimetre ) thick grey coloured i/c cutting the tiles where ever required) in 600x600mm ( six hundred x six hundred millimetre ) skirting risers,dado etc.with 12mm ( twelve millimetre ) thick cement mortar 1:3 (onecement :three sand) and jointed with white cement slurry including carriage of materials with in all leads, lifts and other incidentals.

Providing and laying spartic ceremic tiles 5.5mm ( five pont five millimetre ) thick in flooring (300 x300mm. ( three hundred x three hundred millimetre ) size treads of steps laid on a bed of 12mm. ( twelve millimetre ) thick cement mortar 1:3(one cement: three sand) finished with flush pointing in white cement including carriage of materials with in all leads, lifts and other incidentals.

Providing and laying granite stone in flooring 20mm ( twenty millimetre ) (average) thickness base of cement mortar 1:3(one cement: three sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete. 20mm ( twenty millimetre ) thick including carriage of materials with in all leads, lifts and other incidentals.

White glazed tiles 6 mm ( six millimetre )thick in skirting risers of steps and dado 12 mm ( twelve millimetre ) thick cement mortar 1:3 (one cement : three sand) and jointed with cement slurry including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 0.60mm ( zero point sixty millimetre ) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheetwith top coat of regular modifiedpolyster (RNP) organic coating of 20( twemty ) microns over 5 ( five ) microns primercoating to back coat of polyster of 5microns over 5 ( five) microns primercoating including fixing with prepainted iron Jor L hooks, bolts and nuts 6mm ( six millimetre ) diametre withprepainted limpet andrubber washers complete with allaccesoriees as required as per thedirection of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing andf fixding prepainted sandwhich steel sheet in roofing with top skin of 0.60 mm ( zero pint sixty millimetre ) thick sheet with hot dipped matallic zinc coated sheet with top coat of regular modified plyster (RNP) oraganic coating of 20( twenty ) microns over 5 ( five ) microns primer coating to back coat of polyster of 5 ( five ) microns coating i/c dixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesories as required as per the direction of Engineer- in - charge .

Providing and fixing M.S. BP Sheet 1.66mm to 2mm ( one point sixty six millimetre to two millimetre ) thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely) including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing 0.63mm ( zero point sixty three millimetre ) thick sheet. 15 cm. ( fifteen centimetre ) wide 45 cm. ( forty five centimetre ) overall semicircular plain G.I. sheetgutter with iron brackets 40x3mm ( four x three millimetre ) size bolts and nuts and washers etc. including making necessary conections with rain water pipe complete as per design in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing ridges or hips 60cm(sixty centimetre) overall with 0.60 mm(Zero point sixty milimetre) thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polister organic coting of 20( twenty ) microns over 5 (five) microns primer coating + back coat of polister of 5(five) microns over 5(five ) microns primer coating including fixing with screws prepainted iron J or L hooks, bolts and nuts 6mm( six millimetre ) dia with prepainted G.I. limpet and bitumen washer complete with all accessories as required as per direction of Engineer- in- charge including carriage of material within all leads, lifts and other incidental charges .

Providing and fixing valley 60 cm ( sixty centimetre ) overall with 0.60mm ( zero point sixty millimetre ) thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5( five ) microns over 5 ( five) microns primer coating including fixing with screws prepainted iron J or L hooks, bolts and nuts 6mm( six millimetre ) dia with screwa prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-in-charge including carriage of material within all leads, lifts and other incidental charges .

Providing and fixing flushing 38cm ( thirty eight centimetre ) overall with 0.60mm thick prepainted sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia meter & prepainted G.I. limpet & bitumen washers complete with all accessories as required as per the direction of Engineer-in-Charge.

Steel work welded in built up sections, trusses and framed work including cutting, hosinting fxing in position and applying a priming coat of red lead paint.

In beams joists channels ,angles , tee ,flats with connecting plates or angle cleats as in main and cross beams,hip and jack rafters,purlins connected to common rafters and the like. including carriage of materials with in all leads and lifts complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing M.S. grills of required patterns in wooden frames of windows etc. with M.S. Flats, square or round bars with round headed bolts and nuts or by screws Plain grill including carriage of materials with in all leads and lifts complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing 75 mm x 60mm ( seventy five x sixty millimetre ) rounded hand rails in straight length complete in. 1st class indian teak wood including carriage of materials with in all leads and lifts complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing 100 mm ( one hundred millimetre ) bright finished brass handles with screws etc. complete. including carriage of materials with in all leads and lifts complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing bright finished brass ball catcher 10 mm( ten milimetre ) dia including carriage of materials with in all leads and lifts complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing 300 x16xmm ( three hundred x sixteen millimetre ) anodized aluminium sliding door bolt anodized colour and shade with bolts and nuts screws etc. complete including carriage of materials with in all leads and lifts complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing aluminium tower bolts (berrel type) anodized trans parent or dyed to required shade and colour with screws etc. complete. including carriage of materials with in all leads and lifts complete in all respect as per direction and Satisfaction of Engineer-in-charge .

250x 10 mm ( two hundred fifty x ten millimetre )

150 x 10 ( one hundred fifty x ten millimetre )

Providing and fixing aluminum handles anodized transparent or dyed to required shades and color with screws etc. complete including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

125 mm (One hundred twenty five millimeter)

100 mm (one hundred millimeter)

Providing and fixing 100mm ( one hundred millimetre ) bright finished brass floor door stopper with rubber cushion screws etc. to suit shutter thickness complete including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5 kg/sqm including filling the joints with approved adhesive complete 100mm ( one hundred millimetre ) dia pipes complete as per specification asper direction of Enginer - in - charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing on wall faces PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete complete as per specification asper direction of Enginer - in - charge including carriage of materials with in all leads, lifts and other incidentals.

PVC Plain bend 110mm ( one hundred ten millimetre ) dia

Providing and fixing 110 mm ( one hundred ten millimetre ) dia PVC clamps ISI marked of approved design with steel screws and rawal plugs etc. complete including carriage of materials with in all leads, lifts and other incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Polishing two coats with malamine polish of required shade on new wood and wood based surfaces to give an even surface including cleaning the surface of all dirt, dust and sand papered smooth and including a coat of wood filler including carriage of materials with in all leads, lifts and other incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Applying a birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust,loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete including carriage of materials with in all leads, lifts and other incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Wall painting (two coats) with acrylic emulsion paint of approved brand and manufacture for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including t horoughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling the surface including carriage of materials with in all leads, lifts and other incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Distempering(two coat) with oil bound washable distemper of approved brand and manufacture of required shade and undecorated wall surfaces to give an even shade over and including priming coat with alkali resistant primer of approved brand and manufacture after thoroghly brushing the surface free from mortor dropping and other foriegn matter and also including preparing the surface even and sand papered smooth including carriage of materials with in all leads, lifts and other incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter sand papering and knotting. Ready mixed paint brushing wood primer pink complete including carriage of materials with in all leads, lifts and other incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Painting two coats(excluding priming coat) on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface of dirt,dust and other foreign matter,sand papering & stoping With enamel paint other than white including curing complete and carriage of materials with in all leads, lifts complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Painting two coats (excluding priming coat) on new steel and other metal surfaces, with enamel paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter with enamel paint other than white complete including carriage of materials with in all leads, lifts and other incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing under layer for plinth protection of 75mm ( seventy five millimetre ) thick (unconsolidated) bed of dry brick/stone aggregated 40mm nominal size well rammed and consolidated and grouted with fine sand including preparation of ground. including carriage of materials with in all leads, lifts and other incidental

Providing plinth protection 50mm thick in cement concrete 1:3:6 (one Cement : three Sand : six Graded stone aggregated 20mm( twenty millimetre ) nominal size including carriage of materials with in all leads, lifts and other incidental

WS & S.I. Providing and fixing20 mm (twenty millimetre) nominal bore. to wall ceiling and floor galvanized mild steel tube (medium grade) tube fittings and clamps including making good the wall ceiling and floors including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing Plytheline – Aluminium - Polyethylene (PE-AL-PE) composite pressure pipe U.V. stabilized with carbon black confirming to IS-15450-2004 water supply including clamp at one metre spacing, cutting, fixing and making good the wall etc. but excluding the cost of fittings (internal work) pipes exposed on wall. Internal work-Exposed on wall. 1620 (20 mm OD pipe).

Providing and fixing composite end seal compression fitting as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers, connectors, couplers and clamps with jointing, testing and fitting complete including cutting and making good the walls etc. including carriage of materials with in all leads, lifts and other incidentals charges in all respect as per direction and Satisfaction of Engineer- in- charge .

Equal Tee 1620 mm ( one thousand six handred twenty millimetre)

Female branch Tees 1620 x 1620 x 20 mm ( one thousand six handred twenty x one thousand six handred twenty x twenty millimetre) thread.

Female elbows 1620 x 20 mm ( one thousand six handred twenty x twenty millimetre) thread.

Male thread connector:-1620 x20 mm ( one thousand six handred twenty x twenty millimetre) thread.

Female thread connector:-1620x 20 mm( one thousand six handred twenty x twenty millimetre) thread.

Couplers 1620 mm ( one thousand six handred twenty millimetre)

Making connection of galvanined mild steel dintribution branch with galvanined mild steel main 20mm to 40mm (twenty millimetre to forty millimetre ) nominal bore by providing and fixing tee including cutting and threading the pipes complete including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 1000 (one thousand liters) net capacity PVC water storage tank of ISI 12701 marked, G.I. Inlet and outlet connection , 15 mm ( fifteen millimetre ) nominal bore ball valve and mosquito proof PVC cover with locking arangement including hoisting up to all heights above ground level including carriage of materials with in all leads, lifts and other incidental charges complete in all respect as per direction and Satisfaction of Engineer- in- charge .

Providing and fixing vitreous China wash down, water closet (European type. W.C. pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1(one cement : one sand) wall mounted W.C Jaguar make Cat no - LYS -WHT-38981 with cistern including carriage of materials with in all leads, lifts and other incidental charges complete in all respect as per direction and Satisfaction of Engineer- in- charge .

Providing and fixing vitreous China wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings including carriage of material within all leads , lifts of material and other incidentals .

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete including carriage of material within all leads , lifts of material and other incidentals .

150mm ( one hundred fifty millimetre ) dia

110mm ( one hundred ten millimetre ) dia

75mm dia ( seventy five millimetre )

Providing and fixing PVC single equal branch with oval access door, ISI marked insertion rubber washer 3 mm 9 three millimetre ) thick bolts and nuts complete including fixing with approved adhesive etc. complete including carriage of material within all leads , lifts of material and other incidentals .

150mm ( one hundred fifty millimetre ) dia

110mm ( one hundred ten millimetre ) dia

75mm dia ( seventy five millimetre )

Providing and fixing PVC door bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete including carriage of material within all leads , lifts of material and other incidentals .

150mm ( one hundred fifty millimetre ) dia

110mm ( one hundred ten millimetre ) dia

75mm dia ( seventy five millimetre )

Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc. complete including carriage of materials with in all leads, lifts and other incidentals charges

150mm ( one hundred fifty millimetre ) dia

110mm ( one hundred ten millimetre ) dia

75mm dia ( seventy five millimetre )

Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete including carriage of materials with in all leads, lifts and other incidentals charges in all respect as per direction and Satisfaction of Engineer- in- charge .

150mm ( one hundred fifty millimetre ) dia

110mm ( one hundred ten millimetre ) dia

75mm dia ( seventy five millimetre )

Providig and fixing 110 x 75 mm ( one hundred ten x seventy five millimeter) PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete including carriage of materials with in all leads, lifts and other incidentals charges in all respect as per direction and Satisfaction of Engineer- in- charge .

Providing and fixing 610 x 510 mm ( six hundred ten x five hundred ten millimetre ) with bowl depth 200 mm (two hundred millimetre ) stainless steel kitchen sink of approved standard ISI make with drain board and C.P. waste with C.I. or M.S. Brackets painted white including cutting holes and making good the same but excluding fitting including carriage of materials with in all leads, lifts and other incidentals charges in all respect as per direction and Satisfaction of Engineer- in- charge .

Providing and fixing 32 mm( thirty millimetre ) dia C.P. Brass waste for wash basin or sink including carriage of materials with in all leads, lifts and other incidentals

Providing and fixing 600mm x 450 mm( six hundred x four hundred fifty millimetre ) bevelled edge mirror of superior glass mounted on 6mm thick A.C. Sheet or plywood sheet and fixed to wooden plugs with C.P. Brass screws and washers. including carriage of materials with in all leads, lifts and other incidentals

Providing and fixing C.P. Brass Towel rail complete with C.P. Brass brackets fixed to wooden plugs with C.P. Brass screws 600 x 20 mm ( six hundred x twenty millimetre ) ( Jaquar make AKP -35741P) including carriage of materials with in all leads, lifts and other incidentals

Providing and fixing 600mm x 120 mm ( six hundred x one hundred twenty millimetre ) glass shelf with C.P. Brass bracket and guard rail complete, fixed to wooden plugs with C.P. Brass screws ( Jaquar make AKP -35741P) including carriage of materials with in all leads, lifts and other incidentals

Providing and fixing wall mixing faucet for shower and bath with overhead pipe and bath shower ( Jaquar make CON- 273 KUNPR) including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing one hole basin mixing Faucet ( Jaquar make CON- 167 KNB ) including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 15mm( fifteen millimete ) mixer for kitchen sink with top / bottom swinging spout. including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 15mm( fifteen millimete )C.P bib tap( long body) with Capstan head ( Jaquar make CON- 037 KN ) including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing C.P. brass angle valve 15mm( fifteen millimete ) without Nuts and pipe including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 20 mm ( twenty millimete ) brass full way valve with wheel including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 32 mm ( thirty two millimete ) PVC waste pipe including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing PTMT jet spray of approved quality and colour with 1.00 mtr. ( one metre ) Tube as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals .

Providing and fixing 15mm( fifteen millimete ) P.V.C connection with brass unions including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 100mm (one hundred millimete ) dia C.P gratings including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing chromium plated brass soap dish with C.P. Brass brackets fixed to wooden cleats with C.P. Brass screws including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing Toilet paper holder C.P. Brass including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing charomium plated towel ring with C.P brass brackets fixed to wooden cleats with C.P brass acrews etc. Complete including carriage of materials with in all leads, lifts and other incidentals.

Constructing manhole with RCC top slab 1:2:4 mix ( one cement : two approved sand :four graded crushed stone aggregate 20mm ( twenty millimetre ) nominal size ) foundation concrete 1:4:8 ( one cement : four sand :eight graded stone aggregate 40mm ( forty millimetre ) nominal size) and inside plastering 15mm ( fifteen millimetre ) thick with cement mortar 1:3 (one cement three sand ) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix ( one cement two sand :four graded stone aggregate 20mm ( twenty millimetre ) nominal size ) finished smooth complete including curing and testing . Inside size 800mm x800mm x and 500mm (eight hundred x eight hundred x five hundred millimetre ) deep including C.I cover with frame (light duty single seal pattern -1) 455 x610mm ( four hundred fifty five x six hundred ten millimtre ) internal dimensions total weight of cover and frame to be not less than 38kg. ( thirty eight kilogram ) (weight of cover 23 kg (twenty three kilogram ) of frame 15kg (fifteen kilogram)

With 200mm (two hundred millimetres ) thick walls of brick masonary using common brunt clay building bricks approved quality in cement mortar 1:3 (one cement : three sand .) complete in all respect including carriage of material within all leads , lifts of material and other incidentals .

Providing and fixing Tooth brush and Tumbler holder including carriage of material within all leads , lifts of material and other incidentals .

Providing and fixing C.P towel rack of approved quality and colour with steel screws and rawal plugs etc complete including carriage of material within all leads , lifts of material and other incidentals .

Supply and Fixing Cast iron cover wiith frame for man holes with frame of 500mm internal dia C.I Cover (medium duty0 with weigh of cover with frame 116kg and complete in all respect including carriage of material within all leads , lifts of material and other incidentals .

Providing 200 mm( two hundred millimetre ) wide cast iron Rungs with chequered or ribbed non slip surface including fixing in manholes with 200mm x200mmx100mm ( two hundred x two hundred x one hundred millimetre ) cement concrete 1:3:6 (one cement : three sand : six graded stone aggregate 20mm ( twenty millimetre ) nominal size) including carriage of material within all leads , lifts of material and other incidentals .

Providing and fixing grill jali panel on chamber complete in all respect including carriage of material within all leads , lifts of material and other incidentals .

Supplying cast iron cover without frame for manholes for frame of internal dimension 455mmx610mm( four hundred fifty five x six hundred ten millimetre ) rectangular C.I. Cover (light duty single seal pattern-1) the weight of cover to be not less than 23kg. ( twenty three kilogram ) including carriage of material within all leads , lifts of material and other incidentals .

Rajesh Kumar