SPECIAL REPAIRS TO BLDG NO P-331-342/A3 OF MH TRIVANDRUM AND PROVN OF 2X 1.5 TON SPLIT AC IN BLDG NO P-345(TELECOM SECTION) AT 260FD WKSP COY EME AT PANGODE MIL STN TRIVANDRUM

Amount

Dismantling of single layer Mangalore pattern or similar tiles in roofing all as specified and directed.

Dismantling wooden fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section all as specified and directed

Dismantling of timber scantlings 40 Sqcm and over in section as in unframed work in any position complete all as specified and directed

Material and labour for 2nd class HW clean sawn fillets/battens for tiles sectional area exc 6 and n exc 13 sqcm incl creosote oiling all as specified and directed.

Material and labour for 2nd class HW clean sawn fillets/battens for tiles sectional area exc 6 and n exc 13 sqcm except battens, any of the foregoing all as specified and directed

Material and labour for timber framed and fixed second class Hard Wood in scantling, clean sawn all as specified and directed

Material and labour for timber framed and fixed second class Hard Wood in scantling, clean sawn but except timber all as specified and directed

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheeting, 0.50 mm thick, of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws complete all as specified and directed.

Supply and fix Pre-painted galvalume aluminum zinc coating GI based plain steel sheeting, as in ridges, hip, valey gutar etc, 0.50 mm thick, of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws complete all as specified and directed.

Supply and fix mild steel section as in wind tie of size 40 mm width and 3 mm thick for roof incl securing bollts, all necessary drilling, bolting or riveting etc conforming to Fe 290 Gde E-165 all as specified and directed

Demolition of brickwork/ stone boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc all as specified and directed.

Material and labour for Brickwork with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 all as specified and directed.

Material and labour for rendering 15mm thick on fair faces of external surfaces of brick work or concrete surface in cement plaster 1:4. finished even and smooth without using extra cement all as specified and directed

Material and labour for rendering 10mm thick on fair faces of internal surfaces brick work or concrete surface in cement plaster 1:6. finished even and smooth without using extra cement all as specified and directed

Material and labour for preparation of new plaster surface of wall with three coat of white wash over a coat of primer complete all as specified and directed

Material and labour for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc and making good, cutting n exc 10 cm girth completed all as specified and directed

Material and labour for providing cement concrete 1:2:4 type B1 (20 mm graded aggregate ) as in para pets and railings , bed plates upto 60 cm height incl necessary formwork all as specified and directed

Dismantling floor hearth or wall tiling including cement mortar bedding , removing serviceable tiles to store and rubbish off the premises all as specified and directed

Material and labour for cement concrete 1:2:4 type B0 using 12.5mm graded aggregate in flooring 25mm thick all as specified and directed

Material and labour for screed bed or bedding layer in cement mortar 1:6 20mm thick for laying floor finishes all as specified and directed

Material and labour for coloured non skid ceramic tiles 10 to 12 mm thick area of each tile exc 0.06sqm but n. Exc 0.11sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed

Taking down plastering in cement or cement lime plaster any thickness all as specified and directed.

Material and labour for 10mm thick cement mortar on brick or concrete surface surface as backing coat in CM 1:4 finished rough to receive tiles all as specified and directed

Material and labour for coloured glazed ceramic tiles 300x200x7mm on vertical surfaces of wall such as skirting dado etc all as specified and directed

Material and labour for PCC solid block masonry type B1, 1:2:4 using 20 mm graded aggregate, exceeding 10 cm in width and setting in cement mortar 1:4 complete all as specified and directed

Material and labour for PCC solid Block type B1 masonry 100mm thick in CM 1:4 complete all as specified and directed

Material and labour for formworks to soffits of slab rough finished surfaces of concrete complete all as specified and directed

Material and labour for mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking ,bending, spirally for hoping for columns hooking ends and binding with MS wire annealed not less than 0.90 mm dia all as specified and directed

Material and labour for RCC 1:11/2:3 type B1 using 20mm graded stone aggregate in slabs, shelves etc complete all as specified and directed

Material and labour for rendering in CM (1:6) 10 mm thick on stone masonry surface finished even and smooth without using extra cement all as specified and directed

Material and labour forgranite (of any type) work table rubbed and polished in cooking platform in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite 20mm thick all as specified and directed

Labour only for moulding/ chamfering of granite edge complete all as specified and directed Note: Screed bed shall be measured and paid separately

Material and labour for cement concrete 1:2:4 type B0 using 12.5mm graded aggregate in flooring 70mm thick complete all as specified and directed

Taking down wooden shutters of any description not exc. 1 Sqm each complete all as specified and directed

Material and labour for second class hard wood glazed and skeleton shutters, 30mm thick, open rebated and prepared to receive glass, gauge , edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc., but with sash bar,and edges of sash bars and framing moulded complete all as specified and directed

Supply and fix in repairs Vitreous china wash basin, white, flat back, size 630x450mm, incl brackets (cutting for and pinning in brackets) complete all as specified and directed.

Supply and fix in repairs15mm pillar taps cast copper alloy with capstan heads, chromium plated screwed down high pressure ,with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed but fancy type complete all as specified and directed.

Supply and fix in repairs to waste fittings brass chromium plated for sinks ,WHB etc with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed, 32mm dia fixed complete all as specified and directed.

Supply and fix PVC connections 15mm size with PTMT nuts of length 600mm all as specified and directed.

Supply and fix in repairs Chromium plated fancy type stop valve cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends iron pipe or for union 15mm bore or pipe all as specified and directed.

Supply and fix in repair 75mm PVC SWR floor trap plain with grating including jointing with solvent cement complete all as specified and directed

Material and labour for unplasticized PVC pipe of pressure rating 10Kg f/cm² fixed complete on walls ceilings or on floor 15mm bore all as specified and directed.

Supply and fix PVC SWR pipes single socketed in any length with rubber ring joints, 75mm on walls all as specified and directed.

Supply and fix PVC SWR pipes single socketed in any length with rubber ring joints, 75mm on floors all as specified and directed.

Supply and fix PVC SWR bends any radius 75mm with acess door all as specified and directed.

Supply and fix in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed

Material and labour for sheet glass ordinary quality 3 mm thick, and glazing with oil putty or wooden beads but not exceeding 0.50 sqm in each pane all as specified and directed.

Material and labour for Preparation of new or previously un-treated wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer all as specified and directed.

Supply and fix stainless steel butt hinges 75mm long, medium weight all as specified and directed.

S&F 125mm anodised aluminium barrel tower bolt of extruded section all as specified and directed.

Supply and fix 100mm extruded aluminium anodised alloy handles fabricated type all as specified and directed.

Supply and fix aluminium plate type II gate and shutter, hook and eye 150mm size all as specified and directed.

Taking down carefully existing unserviceable copper/aluminium point wiring (Light, fan, socket or power) with complete fittings, fixtures and pendant, regulator, switches, lamp holders, switch sockets etc. including making good to disturbed surface/concealed in wall/ceiling/floors etc by colouring with existing matching colour, filling of putties complete all as directed

Point wiring complete for One light point controlled by one switch with 1.5 sqmm single core PVC insulated unsheathed FRLS cable 1100 volts grade with multi stranded, copper conductor conforming to IS:694 drawn through and including non-metalic PVC conduit totally concealed in wall with recessed, pressed steel terminal boxes not less than 1.2 mm thick concealed etc, incl suitable thick modular cover plate for housing switches, socket outlets, fan regulators etc, including provn of 1.5 sqmm nominal cross sectional area, PVC insulated, FRLS, unsheathed, 1100 volt grade,multistranded single core green colour copper conductor for earth continuity connected to earth dolly all as specified and directed NOTE: Cost of modular metal flush boxes with a coat of synthetic enamel paint over a coat of red oxide to steel surface to avoid rust, concealed in wall with suitable white cover plate for mounting switch/sockets, regulator, bell push etc and Cost of cutting chases & making good to distrubed surface with cement mortar, if required any shall be deemed to be included in the quoted rate Make: V-Guard / Finolex /RRKabe l/Plaza/Havells /Anchor /MESCab /Polycab

All as per ser item No. 54 here in before but for One fan point controlled by one way switch and regulator

All as per ser item No. 54 here in before but for one 5 Amps outlet on same board with other switches/sockets

All as per ser item No. 54 here in before but for one 5 Amps socket outlet on independent board.

All as per ser item No. 54 here in before but point wiring with 2.5 Sqmm FRLS cable and 2.5 sqmm cable earth continuity wire for one 3 pin socket outlet,15 Amps on independent board.

All as per ser item No. 54 here in before but point wiring with 4.0 Sqmm FRLS cable and 4.0 sqmm cable earth continuity wire for one 3 pin socket outlet,15 Amps on independent board.

Supply and fix modular switch 1 way 6A, 240 volts, 1 module complete all as specified and directed Make: Anchor / Havells/Legrand/Cona/Crabtree

Supply and fix modular switch 1 way 16A, 240 volts, 1 module complete all as specified and directed Make: Anchor / Havells/Legrand/Cona/Crabtree

Supply and fix modular fan step regulator, 120 W - 2 module, 240 Volts, 50 Hz, suitable for ceiling fan 1200 mm/1400 mm sweep all as directed Make: Anchor/ Havells/Legrand/Cona/Crabtree

Supply and fix modular socket, 6A, 240 volts, 2/3 pin combined 2 module, flush type all as specified and directed Make: Anchor/ Havells/Legrand/Cona/Crabtree

Supply and fix modular socket, 6A/16A, 240 volts, 2/3 pin combined 2 module flush type all as specified and directed Make: Anchor / Havells/Legrand/Cona/Crabtree

Supply and fix ceiling rose surface PVC/Polycarbonate, isolated body with face Bakelite 65x50 mm three terminal complete all as specified Make: Anchor / Havells/Legrand/Cona/Crabtree

Supply and fix sheet steel metal enclosure single pole & neutral with a 2 pin and earth plug and socket complete with one single pole MCB SP 20 Amp, 240 volts complete all as specified and directed. Make: Indo Asian / L&T /Legrand /Havells

Material and labour for distribution board made out of sheet metal enclosure (CRCA sheet) dust and vermin proof, double door, TPN 4 way, 415 volts grade with 200 Amps insulated rated bus bar with nickel plated brass, isolated neutral bar and door earthing, earth bar IP- 43 protection with poly urithene (PU) gasketing, IK-08 Mechanical impact resistance, door earthing flush to wall, including testing suitable for fixing MCB SPN, SP etc, including taking down existing unserviceable one and removing from site complete all as directed Make: Cat No. 811841 of IndoAsian or equivalent make of L&T/Legrand/Havells

All as per ser item No. 67 here in before but for SPN 8 way, 240 volts grade with 200 Amps insulated rated busbar

Supply and fix MCB single pole 5 to 32 Amps, 240 volt, 10 KA, C curve with IP-20 protected terminals including contact indication window for visual indication and safety of operator, IP-20 protection, energy limitation Class-3, airflow channels on both sides, bi-connect terminals etc., complete all as specified and directed Make: Legrand or equivalent in L&T/Indoasian/Havells

All as per ser item No. 69 here in before but for MCB SPN 25 to 32 Amps

All as per ser item No. 69 here in before but for MCB TPN 63 Amps

Supply and fixing sub main wiring with 2 runs of 4 sqmm single core, multi-stranded PVC insulated, unsheathed cable 1100 Volts grade with copper conductor drawn through and including concealed non metalic PVC conduit, medium grade, ISI marked, 20mm bore with conduit fittings and accessories concealed in wall/ceiling/floor including one run of 4 Sqmm multistranded PVC insulated copper conductor cable as earth continuity conductor and connecting to common earth dolly complete. NOTE: Two runs of 4 sqmm copper cable and one run of 4 sqmm copper cable alongwith non metallic PVC conduit/conduit accessories will be measured as one unit length Make: V-Guard / Finolex /RRKabel /Plaza /Havells /Anchor /MESCab /Polycab

All as per ser item No.72 here in before but for sub main wiring with 2 run of 6 sqmm & 1 run of 6 sqmm as earth wire

Taking down carefully existing serviceable Ceiling fan/Wall mounted fan, ceiling cable end, etc., removing the fan for keeping in safe custody, hanging the ceiling fan with down rod after rewiring including clamps, hooks, holdfasteners etc and connecting up, including making electric connection from ceiling rose or connector to fan complete all as directed

Taking down carefully existing serviceable exhaust fan, ceiling cable end, etc., removing the fan for keeping in safe custody, fixing the exhaust fan connecting up after rewiring, including making electric connection from ceiling rose/connector to fan complete all as directed

Supply and fix surface and wall mounted complact commercial LED batten suitable for single T8 LED tube, including LED polycarbonate T8 tube 1 x 20 Watt with in built driver with metal heat sink, double sided connection, 865-CRI 80, 6500K etc. including prewired with 3 core flexible cables with copper conductor from connector to light fittings & connecting up, including taking down existing unserviceable one and removing from site complete all as specified and directed. NOTE: LED tube light and LED batten fittings should be two different items. Make: Crompton or equivalent make of Havells/Philips/Bajaj/Wipro

Supply and fix PLUTO NEO panel 2x2, environmental friendly, surface/recess mounted LED luminaire of fixture size 600x600x70mm with new generation, aesthetically designed LED flat panel which provides soft-light and glare free symmetrical illumination with 34 watt LED 5700K incl taking down old unsv one removing from the site complete all as specified and directed. Make: Havells or equivalent make of Philips/CG/Bajaj/Wipro

Supply and fix PLUTUS outdoor wall light fittings, 1 x 3 Watt, WH, AC 240 Volt, decorative type with aluminium die cast, dark grey colour with IP-65 protection complete all as specified and directed. Make: Cat No. LODUPGU10 of Luker or equivalent make of Bajaj/Philips/Crompton/Havells/Wipro

Supply and fix Freedom Neo pressure die-cast, roadway luminaries, epoxy black powder coated sheet aluminium housing, with epoxy white powder coated CRCA sheet steel gear tray, clear acrylic cover as diffuser with IP65 protection and accessories, including supply and fixing LED security light 1x45 watt 6000K, high efficacy-110LM/W, with fixing bracket made of 40mm bore galvanised iron light grade pipe made to shape having overall length not exceeding 1.5 mtr, fixed on the wall with suitable No. mild steel clamp of 25mm width and four Nos nuts,bolts & washers of 12mm dia, 100mm long complete including connecting wire with flexible PVC insulated copper cables from ceiling rose to fitting complete and testing, including taking down existing unserviceable one and removing from site complete all as specified and directed. Make: Crompton or equivalent make of Havells/Philips/Bajaj/Wipro

Material and labour for Earthing complete in replacement with galvanised iron mild steel earth plate electrode 60 cm x 60 cm x 6.3mm thick burried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of earth plate at a depth of not less than 1.5 metre below normal ground level, connected to glavanised earth lead of GI wire of size 4mm dia by means of GI Bolts, Nuts, check nuts and washers of the earth and thimbles and other end of the earth strip connected to earthing test point and protected by galvanised iron pipe light grade 40mm dia from earth plate to Panel and DG set and water pipe 20mm dia GI medium grade raised upto a level of 50cm above ground level with plug at top, earthing pit in PCC (1:3:6) type C-1 RCC pre-cast (1:2:4 type B-1) cover slab of 50 mm thick using 8.00mm dia CTD bars reinforcement both ways at 140 mm centre to centre with handle, 20 mm dia GI pipe medium grade for watering pipe, wire mesh, funnel and providing charcoal or coke and salt in alternative layers of 15 cm including necessary earth work in soft/loose soil, returning, refilling and removing of surplus soil to a distance n. exc. 50 mtr testing complete all as shown in electrical plate No-3 of MES Schedule Part-I of SSR-2009 complete all as specified and directed.

Supply, installation/fixing, testing and commissioning of room air conditioner unit including inverter (Split type Air Conditioner of capacity 1.5 TR comprising of indoor and outdoor unit) five star rating, electric driven single phase, 230Volt, 50Hz AC including necessary fixing arrangement complete as relevant IS (indoor unit at suitable place and height inside the room and outdoor unit at suitable place outside the room on plinth height/ on wall or roof as suitable and as directed) including metallic bracket with fixing bolts for outdoor unit, insulated piping etc complete all as specified and as directed Make: Voltas or techno-equivalent make of Hittachi/LG/Blue star

Supply and install voltage stabilizer for automatic operation with digital voltmeter to monitor in/out voltage with time delay and bypass switch, single phase, thermal overload protection, low & high voltage cut-off protection, LED indication, IC controlled, naturally air cooled indoor type and design for input variation between 170 volts to 250 volts with output output voltage stabilized at 230V with accuracy of + 2.5% and of capacity 4 KVA complete all as specified and directed Make: V-Guard or techno-equivalent make of Microtek/Brenfort

AKASH CONSTRUCTIONS

M/S AARJAY ASSOCIATES

KENZ CONSTRUCTIONS