Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹65.8 LAccepted-AOC | 1 | Accepted-AOC Being the lowest bidder. | |
| 2 | 2₹68.3 L+₹2.5 L (3.80%)Rejected-AOC GE WEST BAREILLY | 2 | Rejected-AOC Being other than the lowest bidder. | |
| 3 | 3₹76.4 L+₹10.7 L (16.2%)Rejected-AOC 110B CIVIL LINES BAREILLY 243001 UP | BAREILLY | UTTAR PRADESH | 243001 | 3 | Rejected-AOC Being other than the lowest bidder. |
Tender Value
₹88 L
EMD Value
₹1.6 L
Closing Date
11 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Bareilly
HEADQUARTERS, COMMANDER WORKS ENGINEER, MILITARY ENGINEER SERVICES, STATION ROAD, BAREILLY CANTT, PIN 243001
CWE BLY / GE(W) / 70 OF 2022-23 SPL REPAIR TO BLDG NO. P-72 GHARIYA LINES OF JRC, BATHROOM OF BLDG NO. P-10/1 (PHILLORA COY), BLDG NO. P-144 (DOGRAI COY) AT JRC AND PROVN OF 07XTOILET ATT WITH SEWAGE LINE IN OR MD ACCN NO T-65 OF JRC UNDER GE(W) BLY
2023_MES_572997_1
8100/B/752/E8
Open Tender
Civil Works
Item Rate
270 days
Bareilly
Please refer Tender documents.
6 documents required · 6 mandatory
₹1,000
GE ( W ) Bareilly
₹1.6 L
Yes
24 Feb 2023
5 Jan 2023
18 Feb 2023
5 Jan 2023
11 Feb 2023
28 Jan 2023
Amount
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft and loose Soil complete all as specified and directed.
M&L PCC type D2 1:4:8 (using 40 mm graded aggregate in foundations, filling and mass filling and mass concrete complete all as specified and directed.
M&L brick work with fly ash brick straingt or curved on plan exc 6 m mean radius built in cement mortar in CM 1:6 complete alll as specified and directed.
Removing excavated soil n.exc 50mtr and depositing where directed at a level n exc 1.50 mtr above the starting point complete all as specified and directed.
Returning filling in,including spreading,levelling,watering and well ramming in layers n exc 25cm in soil complete all as specified and directed. .
M& L for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.
M&L for TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
M&L for TMT bars 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders , cut to length , bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
M&L for form work to sides of concrte foundations, footings,bases of columns, raft beams sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter complete all as specified and directed.
M&L for form work to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.
M&L for form work to side of beams, cantilevers, bressummers,lintels over 1.5m span complete all as specified and directed.
M&L RCC type A1 (1:1.5:3) 20 mm graded aggregated as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc and mass concrete complete all as specified and directed.
M&L RCC type A1 (1:1.5:3) 20 mm graded aggregated as in Columns, pillars, piers, posts and struts etc complete all as specified and directed.
M&L RCC type A1 (1:5:3) 20 mm graded aggregate as in beams, cantilevers, bressummers,lintels over 1.5m span complete all as specified.and directed.
M & L for Steel work in hollow rectangular/square trusses, purlins, rail including special shaped washer etc. complete using ERW or induction butt welded steel section conforming to I. S.1161- 1979 grade inluding one coat of zinc chromate primer before fabrication distance pieces, cleats etc GDE Fe 410-S. complete all as specified and directed.
M&L Pre-painted galvalume aluminium zink coating GI based corrugated steel sheet .50 mm lthick of an colour having tensile strength of 550 Mpa as in roof covering/Clading to wall, fixed with self tapping screws complete all as specified and directed.
M&L Rendering 15mm thick on other than fair faces of brick work in CM (1:6) finished even and smooth (with out using extra cement) complete all as specified and directed.
M&L Rendering 15mm thick in CM (1:4) on fair faces of brick/concrete walls, finished even and fair (without using extra cement) complete all as specified and directed.
M&L for Hardcore of broken brick of gauge exc 63 mm but n. exc 100 mm, deposited, spread and levelled in layers n. exc 15 cm thick, watered and rolled/ rammed to a true surface complete all as specified and directed.
M&L PCC 75 mm thick (1:4:8) type D-2, using 40 mm graded aggregate as sub base complete all as specified and directed.
M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.
M&L for glazed ceramic coloured tiles in vertical surfaces of wall 450x350x7mm thick, set and jointed in neat cement slurry pointed in coloured cement to match over 10 mm thick plastering in CM (1:4) on brick /stone masonry or other than fair face of brick work complete all as specified and directed.
S& F Solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.
S&F 30 mm thick factory made plain solid pvc door consists with both side Prelam PVC sheet joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and directed.
M&L for steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.
M&L for 3mm thick frosted sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.
S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width aperture 1.40mm and fixed with stain less steel wire staples complete all as specified and directed.
S&F Aluminium anodised, barrel tower bolts of extruded section and fixed, 200 mm long complete all as specified and directed.
S&F Extruded aluminium alloy handles, fabricated type, anodised 150 mm long complete all as specified and directed.
S&F Extruded aluminium alloy, anodised, 300mm long sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and slliding bolts of extruded sections or cast-aluminium alloy and fixedcomplete all as specified and directed.
S&F 75 mm butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed.
Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified and directed.
Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed.
S&F tubes ‘medium’ grade galvanized with all fittings fixed complete to walls and ceiling or laid in floor bore of tube 15mm complete all as specified and directed.
S&F tubes ‘medium’ grade galvanized with all fittings fixed complete to walls and ceiling or laid in floor bore of tube 20mm complete all as specified and directed.
S&F 6 x 6 inches ultra slim shower head with 12 inches arm of Chromium plated brass for fixing 15 mm pipe with bend of 45 degree with flange complete all as specified and directed.
S&F Vitreous china wash down water closet (pedestal pattern) white complete, including seat cover ,connection to drain pipe and to flushing pipe antisyphonage pipe etc complete all as specified and directed.
S&F 10 ltrs capacity (PVC), valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.
S & F 100 mm cast iron sanitary connection socket to fit WC out let complete all as specified and directed.
S&F fancy Bib tap 15mm dia cast copper alloy chromium plated with crutch or buter fly handle screwed down (Pressed for iron pipe) fixed complete all as specified and directed.
S&F stop valve/angle cock 15mm dia, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union and fixed complete all as specified and directed.
S&F chromium plated fancy type concealed stop cock for 15 mm bore pipe complete all as specified and directed.
S&F CI floor traps with grating complete 100mm bore outlet including jointing to waste pipe fixed in cement concrete type B1 1:2:4 complete all as specified and directed.
S&F 450mm long PVC connection 15mm bore with PTMT nuts complete all as specified and directed.
S&F vitreous china,white, wash hand basin, flat back size 550x400mm 'including MS brackets including cutting for and pinning in, but excluding waste pipe complete all as specified and directed.
S&F 15 mm dia brass chromium plated pillar tap, fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut, capstan head, screwed for 15mm dia pipe complete all as specified and directed.
S & F PVC (SWR) 110 mm dia soil waste or rainwater drainage pipes single socketed in any length with rubber ring joint laid in floor or fixed on wall complete all as specified and directed.
S & F CI soil, waste and vent pipe, 75mm bore, in any length with or without ear with cement joint fixed to walls complete all as specified and directed.
M & L 75 mm dia cost Iron Nahani trap with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) as in repairs complete all as specified and directed.
S&F 100mm bore CI soil waste / vent pipe (spun type) in any length with or without ears with cement joint to wall with stack clamps out of 110mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing end of stays to wall or roof etc complete all as specified and directed.
S&F 75 mm bore CI bends (any radius) diminishing pieces or tapers (larger bore mesured) with oval access door complete all as specified and directed.
S&F 100 mm bore CI bends (any radius) diminishing pieces or tapers (larger bore mesured) with oval access door complete all as specified and directed.
S & F 500 ltrs capacity rotational moulded polythylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.
S&F of 20 mm dia Ball valves high pressure of PTMT witth epoxy coated Aluminium rod& high-density plastic ball srewed for iron pipe and fixed (minimum weight 20mm-210gms/ complete all as specified and directed.
Cutting openings, through brick walls for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc. to store and rubbish not exc. 50m complete all as specified and directed.
M&L white washing three coats to wall surfaces including preparation of newly plastered untreated surfaces complete all as specified and directed.
M & L for applying two coats of cement based paint on newly plastered wall surfaces over a coat of primer including preparation of surfaces, Finishes shall be applied using airless spray technology and capable of oprating single spray gun with a suitable hose length. The spray machine should be reputed manufacturer with pro-guard technology and capability of tracking pressure as well paint & primer usage complete all as specified and directed.
M&L 75 mm thick PCC 1:3:6 type C1 using 20mm graded stone agg in plinth protection, finished even and smooth w/o using extra cement complete all as specified and directed.
M & L preparation of new steel surfaces over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Excavation over area exc 1.5m in depth but not exc 3.0 m and getting out in soft/loose soi complete all as specified and directed.
Excavation over area exc 3.0 m in depth but not exc 4.5 m and getting out in soft/loose soi complete all as specified and directed.
PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in bed of NP-2 drain pipe 150 mm bore including packing under and completely surrounding the pipes after they are laid and tested complete all as specified and directed.
M & L 150 mm dia Reinforced concrete pipes, class NP2, laid and jointed complete with collars laid in trenches and jointes complete all as specified and directed.
M&L for brick work in burnt brick with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM (1:4) complete all as specified and directed.
M &L Brick work with subclass brickwork in one and half brick thick honey comb walling in CM 1:4 complete all as specified and directed.
M&L for Brick bats filling of gauge 80mm to 150mm in the sewage soakage well complete all as speicified and directed.
M & L PCC 1:2:4 type B1 using 20mm traded stone aggregate as in coping /benching including necessary form work and finishing all exposed surfaces of concrete complete all as specified and directed.
Providing orange colour safety foot rest minimum 6mm thick plastic encapsulated as per IS : 10910 on 12mm dai steel bar conforming to IS : 1786 having minimum cross section as 23mmx 25mm and over all minimum length 263mm and width as 165mm with minimum 112mm space between protruded legs having 2 mm tread on top surface by ribbing or chequerering besides necessary and adequate anchoring projections on tail length on 138mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacturer's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) complete as per design complete all as specified and directed.
15mm thick cement plaster mortar in cement and sand mortar (1:4) on faces of brick work or concrete surface mixed with water proofing compound as per manufacturer's instructions, surface finished even and smooth without using extra cement (WPC shalll be measured and paid for separately) complete all as specified and directed.
15mm thick cement plaster mortar in cement and sand mortar (1:3) on faces of brick work or concrete surface mixed with water proofing compound as per manufacturer's instructions, surface finished even and smooth without using extra cement (WPC shalll be measured and paid for separately) complete all as specified and directed.
S & F Integral water proofing compound ISI marked complete all as specified and directed.
Use and waste of Formwork to edges of slab not exceeding 200mm wide slab fair finished complete all as specified and directed.
M&L for Reinfoced Cement Concrete in nominal mix Type B0 1:2:4 (12.5mm graded aggregate) as in cover slabs supported to walls for Manhole to fixing of SFRC cover Haevy duty HD-20 grade designation) etccomplete all as specified and directed.
Dismantling asbestos cement (corugated or semicorrugated etc ) sheets, in roof covering complete all as specified and directed.
S&F 6 mm thick asbestos cement, corrugated or semi corrugated or semi-corrugated sheets with L type or J type or crancked hook in roofs, wall etc complete all as specified and directed.
S&F 6mm thick Asbestos Cement one piece plain angular ridge fixed with L type or J type or crancked hook in roofs, wall etc complete all as specified and directed.
Dismantling wall and ceiling board or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.
M&L for 4mm thick E-Board classic tiles for insulation and accoustic purpose 60cm x 60cm with and including powder coated galvanised iron snap grid with 32x25x1.5mm thick Tee section and 32x25x1.5mm thick algle section with all hanging/supporting arrangements as in false ceiling and making good disturbed surface complete all as specified and directed.
Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed by Engineer-in-Charge.
M & L Brick work with Fly ash bricks straight or curved on plan exc 6m mean radius built in cm 1:4 complete all as specified and directed.
M & L for brick work with Fly ash brick in half brick thick built in CM 1:4 straight or curved in plan exceeding 6 mtr mean radius complete all as specified and directed.
Dismantling of stone slabs and tiles of any description or thickness in floors, aprons Laid, bedded and pointed in any mortar etc complete all as specified and directed.
M & L for non- skid ceremic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes even and rough with and including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed.
M & L for non- skid ceremic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile in vertical surface as skirting set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick screed bed or bedding layer of cement mortar 1:4 cement and dismantling of wall tile including cement mortar bedding complete all as specified and directed.
M & L for non- skid ceremic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes even and rough with and including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed.
M & L for colour glazed ceremic coloured tiles in vertical surface 300 x 450 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick screed bed or bedding layer of cement mortar 1:4 cement and dismantling of wall tile including cement mortar bedding complete all as specified and directed.
M&L for 16 to 18mm thick granite (of any type and shade) work (table rubbed and polished) in floors, steps, jambs, pillars, window cills, cooking plateforms and like in CM 1:4 incl pointing in white cement(1:2) using marble dust with admixture of pigment to match the shade of granite stone including grinding and polishing, moulding of edges complete over and incl 15 mm thick screed bed or bedding layer of mortar in cement mortar 1:4 complete incuding hole for gas pipe complete all as specified and directed.
Taking down cement plaster including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.
Taking down of chowkats of frames n.exc 1.5 Sqm each with shutters (without taking of shutters from the frames) complete all as specified and directed.
Taking down of chowkats of frames exc 1.5 Sqm but n exc 4 sqm each with shutters (without taking of shutters from the frames) complete all as specified and directed.
Hacking out old broken glass (any thickness size, quality or description) from wooden frames glazed with putty of fixed with beads complete all as specified and directed by Engr-in-Charge.
Taking down shutter of any description not exc 1 sqm each complete all as specified and directed
Taking down shutter of any description exc 1sqm and not exc 2 sqm each complete all as specified and directed
S&F 2nd class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.
S&F for 40 mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed .
S&F 35 mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); fitted to chowkats complete all as specified and directed.
S&F mild steel window grills box type framed work as in window guard bars, grills or forged into spikes, framed balusters, walkway railing and similar work including welding complete FE-290 grade E-165 complete all as specified and directed.
S&F of Steel windows with pressed steel frame ( size 95x45x1.25 mm) side hung shutter including box type hinges with steel handle, and steel peg steel complete with glazed openable shutter with glazing bar (open out side) and wire gauged openable shutter without glazing bar ( open in side) dovetailed or welded complete all as specified and directed and all as per Drg No TD/088 dt 07 jan 2002 Note:- (i) Two shutter ie wire gauged and glazed shall be fixed in one composite frame and both shutter shall be measured as one unit. (ii) Rate for filling of PCC in frame deemed to be included in quoted rate. (ii) MS grill shall be measured and paid seperatly under relevant item of schedule complete all as specified and directed.
All as per item No. 99 above, but without glazing bars complete all as specified and directed.
S&F Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed by Engr-inCharge.
S&F 100 mm long butt hinges, medium weight, cold rolled, mild steel and fixed complete all as specified and directed.
S&F 125 mm long Aluminium handles cast type anodised complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width strucks inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either to side and as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site as specified of drawing.
S & F small articles of steel such as hold fast, etc of Gde Fe 410-0 or Fe-0 complete all as specified and directed.
M&L for two coat OBD on newly plastered wall surface with Finishes shall be applied using airless spray technology and capable of oprating single spray gun with a suitable hose length. The spray machine should be reputed manufacturer with pro-guard technology and capability of tracking pressure as well paint & primer usage, over a coat of primer and over one coat of wall care putty of 2mm thickness complete all as specified and directed.
M&L for two coat OBD on old plastered wall surface with Finishes shall be applied using airless spray technology and capable of oprating single spray gun with a suitable hose length. The spray machine should be reputed manufacturer with pro-guard technology and capability of tracking pressure as well paint & primer usage, over a coat of primer and over one coat of wall care putty of 1mm thickness complete all as specified and directed.
M & L applying two coat of cement based paint on old decorated or undecorated wall, roof surface including preparation of surfaces by washing rubbing down and stoping of distempered and painted surfaces, Finishes shall be applied using airless spray technology and capable of oprating single spray gun with a suitable hose length. The spray machine should be reputed manufacturer with pro-guard technology and capability of tracking pressure as well paint & primer usage, complete all as specified and directed.
M&L for preparation of newly plastered or untreated surfaces and applying three coats of white wash to Ceiling complete all as specified and directed.
Demolition of cement concrete(unrinforced), in any position and paving n.exc. 15 cm thickness( below or above ground level) including tile/ terrazzo floor complete all as specified and directed.
M & L for plain cement concrete 1:2:4 type B-1(using 20mm graded stone aggregate) as in floor 25 mm thick finished even and smooth with using extra cement complete all as specified and directed.
S&F glass dividing strips, 3 mm thick 22 mm with inserted in position to confirm to design complete all as specified and directed.
M&L providing cement concrete 1:3:6 type C1 (using 20 mm graded stone aggregate) as in benching, coping, bed blocks including necessary form work, weathering slightly rounded or chamfered angles and throating, complete all as specified and directed by Engineer-in-charge.
M & L for painting to wood and wood based surfaces of any description exc. 10 cm width or girth with two coats of synthetic enamel paint over a coat of pink primer including prepration of new or previously untreated surfaces complete all as specified and directed.
M & L for preparing and treating ends of posts, back of chowkats with coal tar black paint, area tarred exc. 0.10 sqm but not exc. 0.50 sqm complete all as specified and directed.
M & L for preparing and treating small articles such as hold fasts with coal tar black paint, area tarred not exc. 0.10 sqm complete all as specified and directed.
Dismantling water tanks and removing to store capacity exc 250 and not exc. 500 litres complete all as specified and directed.
Taking up or down 15 mm dia steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.
Taking up or down 20 mm dia steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.
Refixing old steel tubing and connection in new or old position (wall, ceiling,floor etc.) bore of pipe 20mm complete all as specified and directed
Refixing old steel tubing and connection in new or old position (wall, ceiling,floor etc.) bore of pipe 15mm complete all as specified and directed
S&F in repair for bib taps, cast copper alloy crutch or butter fly handle, screwed down, screwed for iron pipe of 15mm bore complete all as specified and directed.
S&F in repair stop valve 15mm dia, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union and fixed complete all as specified and directed.
S&F in repair stop valve 20 mm dia, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union and fixed complete all as specified and directed.
S & F in repair PTMT grating size 125 mm fixed with white cement complete all as specified and directed.
S & F in repair chromium plated shower rose with or without swivel joints, any size, including fixing to steel pipe or union size 125 mm complete all as specified and directed.
S&F in repair for 15 mm dia concealed stop cock fancy type, cast copper alloy chromium plated long shank and cup washers, crutch or butter fly handle, screwed down, screwed for iron pipe of 15mm bore complete all as specified and directed.
S&F in repairs stainless steel kitchen sink with drainage board of overall size 915x460mm and bowl size 410x330x160mm with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe complete all as specified and directed.
S&F in repair vitreous china,white, wash hand basin, flat back size 550x400mm 'including MS brackets including cutting for and pinning in, but excluding waste pipe complete all as specified and directed.
PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.
S&F in repair for vitreous china squatting pan 'Orissa' pattern of size 580mm x 440mm white with integral foot rest with 'P' or 'S' trap, front or back inlet and connection to trap with cement mortar etc complete all as specified and directed.
Taking up or down AC/PVC rain water pipe, soil/waste/vent pipe of any size with fittings etc complete all as specified and directed.
S&F 110mm PVC (SWR) bends any radius complete all as specified and directed.
S&F 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall complete all as specified and directed.
S&F 75mm PVC (SWR) bends any radius complete all as specified and directed.
S&F in repairs tubular, towel rail brass chromium plated 20mm dia D type 60 cm long between flanges complete all as specified and directed.
S & F framed brackets of angles or tees with web and flanges cut to shape, drilled and counter sunk for screw including bending and welding angles as necessary gusset plates, riveting etc, n.exc 10 Kg each brackets conforming to Fe-290 Gde E-165 (Brackets over 10 Kg each to be measured under Structural steel complete all as specified and directed.
M & L for Plain Cement Concrete 1:2:4 (40mm graded stone aggregtae) in surface chanel and drain work etc complete all as specified and directed.
S&F 25mm dia decorative curtain rods of any pattern, design & colour with end fittings and brackets complete all as specified and directed.
Demolition of cement concrete (reinforced) in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed.
M&L for RCC type B0, 1:2:4 (20mm graded aggregate) as slabs supported on walls, beams and columns in floors, roofs, landings, chajja, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
Cutting into existing manholes for connecting new drains, making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 sectiion) in cement concrete 1:2:4 (type B1) smooth finished, and reforming benching as required of pipe 100mm dia complete all as specified and directed.
M & L for PVC (SWR) floor trap/Nahani Trap, dia of outlet 75mm, plain with grating including jointing with solvent cement complete all as specified and directed.
S&F32 mm Waste coupling of PTMT (half or full threaded) weight 40 gm including waste pipe complete all as specified and directed.
S&F PVC (SWR) vent cowl 75 mm dia complete all as specified and directed.
Concrete bed to drain pipes of 100mm bore including packing under and hauching against the sides of pipes after they are laid and tested in PCC 1:3:6 type C2 complete all as specified
Cutting holes into or through cement concrete (Reinforcement) slabs, chajjas is cut through not ex 100 sqcm as specified and directed
M&L for applying one coat of exterior emulsion paint (Apex) on AC Sheet in roofing including preparation of surfaces by brooming or steel wirebrushing, scrapingsmoke soot mould, moss and effloroscent salts treating oily and greasy spots including cornices etc coomplete all as specified and directed.
M & L for rendering 10 mm thick on ceiling or concrete surfaces in cement mortar (1:3) finished the surface even and smooth without using extra cement coomplete all as specified and directed.
M&L Preparation of old wall surfaces and applying two coats of white washing on wall coomplete all as specified and directed.
M & L preparation of old plastered surfaces of ceiling and applying one coats of white wash coomplete all as specified and directed.
M&L Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position coomplete all as specified and directed.
S&F coloured granite (of any type ) tiles 20 mm thick machine cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing after roughing to surfaces and applying screed bed of 10mm thick of cement mortar 1:3 complete all as specified and directed.
S & F fancy type viterous china counter top, wash hand basin oval shaped colours of size 550 x 400 mm with granite inserted in 25 mm thick mounted granite stone slab platform by cutting on oval shaped etc incl CP bottle trap completed all as specified and ditected. (Granite cuttings shall be measured and paind separately.
Providing water proofing treatment to RCC sunken slab as specified and directed as under:- (a) Cleaning the existing RCC sunken slab and vertical wall/RCC beam and hacking the surface. (b) 15mm thick plastering over the floor & vertical surface in CM 1:4, mixed with liquid water proofing compound @ 200ml per 50 kg of cement trowelled to even and smooth finish without using extra cement .(Water proofing compound shall be measured and paid separately). (c ) filling the sunken portion with water for 72 hrs and carring out the ponding test.(Any leakage /seapage noticed shall be repaired). (d) Applying two coats of elastomaric acrylic water proof coating Make: Dr. Fixit of pidilite or equivalent per sqm in each coat with roller application.(Note: Each coat of elastomaric acrylic compound requires 6-8 hrs to dry up itself second coat shall be applied on getting the first coat completely dried up.)
M&L for cement concrete type E2 (1:5:10) 40 mm graded aggregate as in mass concrete, coomplete all as specified and directed.
M&L for form work as in rough finished surfaces of soffits and of shelves, chajjas n.exc 20cm thick coomplete all as specified and directed.
S&F CI 75 mm bore branch piece single (equal or unequal) ordinary or inverted (spigot or shocket type) or with parallel branches with oval access door, coomplete all as specified and directed.
S&F CI 100mm bore branch piece single (equal or unequal) ordinary or inverted (spigot or shocket type) or with parallel branches with oval access door, coomplete all as specified and directed.
S&F in repairs, 25 mm dia Ball valves high pressure of PTMT witth epoxy coated Aluminium rod& high-density plastic ball srewed for iron pipe and fixed (minimum weight 20mm-210gms, coomplete all as specified and directed.
M & L 75mm thick plain cement concrete type D-2 1:4:8 (40 mm graded stone aggregate) as in sub base complete all as specified and directed.
S & F Sheet glass ordinary quality 3 mm thick and glazing with oil putty in squares n exc 0.5 Sqm in each pane complete all as specified and directed.
M & L preparation of old steel surfaces over 10 cm in width or girth and applying two coats of synthetic enamel paint including preparation of the surfaces complete all as specified and directed.
S & F Non skid ceramic coloured tiles 7 mm to 8mm thick (square /rectangular ) area of each tiles exceeding 0.06sqm but n . Exc 0.11 sqm superior premium quality, grade B-1 as per IS in Water splashing floors etc . set and jointed in neat cement slurry and pointed in white or coloured cement including 15mm thick screed bed or bedding layer in cement mortar 1:4 as in floor complete all as specified and directed.
S & F Non skid ceramic coloured tiles 7 mm to 8mm thick (square /rectangular ) area of each tiles exceeding 0.11sqm but not exc 0.18 sqm superior premium quality, grade B-1 as per IS in Water splashing floors etc . set and jointed in neat cement slurry and pointed in white or coloured cement including 15mm thick screed bed or bedding layer in cement mortar 1:4 as in floor complete all as specified and directed.
S&F in repairs 6 x 6 inches ultra slim shower head with 12 inches arm of Chromium plated brass for fixing 15 mm pipe with bend of 45 degree with flange complete all as specified and directed.
S&F in repairs Vitreous china wash down water closet (pedestal pattern) white complete, including seat cover ,connection to drain pipe and to flushing pipe antisyphonage pipe etc complete all as specified and directed.
S&F in repair 10 ltrs capacity (PVC), valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.
S & F in repairs 100 mm cast iron sanitary connection socket to fit WC out let complete all as specified and directed.
S&F in repairs chromium plated fancy type concealed stop cock for 15 mm bore pipe complete all as specified and directed.
S&F CI floor traps with grating complete 100mm bore outlet including jointing to waste pipe fixed in cement concrete type B1 1:2:4 complete all as specified and directed.
S&F in repairs 450mm long PVC connection 15mm bore with PTMT nuts complete all as specified and directed.
S & F in repairs designer mirror of size 1.8x0.60m of 6mm thick beveled edge and including with all fixing arrangement with SS brackets complete all as specified and directed.
S&F vitreous china urinal full stall type colours excluding flushing cistern flush pipe and waste pipe complete all as specified and directed.
Dismantling water tanks and removing to store capacity exc 1000 and not exc. 2000 litres complete all as specified and directed.
M & L for colour glazed ceremic coloured tiles in vertical surface 450 x 350 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick backing coat of cement mortar 1:4 cement and dismantling of wall tile including cement mortar bedding complete all as specified and directed.
S&F in repair stop valve/angle cock 15mm dia, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union and fixed complete all as specified and directed.
S & F 2000 ltrs capacity rotational moulded polythylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.
Taking down carefully aluminium point wiring any type including battens if any except for ceiling or where not feasible for light/ fan//bell/socket or power and including unscrewing from board, fitting and fixture such as switches,socket, ceiling rose,lamp holder,pendants, bracket and regulator etc and removing material from site including making good disturbed surface to match with the existing surface complete all as specified and directed.
Taking down carefully UNSV main switch DBs of any description of an size in any position ccomplete all as specified and directed.
Taking down submain wiring including all accessories complete all as specified and directed.
Material and labour for point wiring with single core PVC sheathed 1100 volt grade cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium duty ISI marked not less than 20mm dia, with all conduit accessories, screws, rawl plugs (concealed conduit wiring in walls and casing capping on ceiling or roof) including pressed steel terminal sunken boxes and covered with 3 mm thick plastic laminated sheet cover of suitable size with new brass screws for mounting switch sockets and regulators and drawing continuous earth wire with and including PVC sheathed 1100 Volts grade cable with stranded copper conductor of size 1.5 Sq mm (Nominal area) and connected to main earth dolly complete all as specified and directed for:- One light / fan/ exhaust fan point controlled by one switch, complete all as specified and directed.
All as per item No 182 above but, One 5 pin 5 Amp switch socket out let point on an independent board, complete all as specified and directed.
All as per item No 182 above but, One 5 pin 5 Amp socket out let point controlled by one switch on same board, complete all as specified and directed.
All as per item No 182 above but, One buzzer/ bell point controlled by one push button on the same board with other switches or independent, complete all as specified and directed.
All as per item No 182 above but, One 15 Amp 6 Pin switch socket out let independent with 2.5 Sqmm FRLS (Nominal Area) PVC unsheathed copper conductor single core multistranded incl 2.5 sq mm FRLS PVC copper conductor single core used as earth continuity conductoe complete all as specified and directed.
S & F Switch piano flush type 5 amp single pole one way, complete all as specified and directed.
S & F Socket out let 2 in 1 flush type 5 amp 5 Pin, complete all as specified and directed.
S & F Switch piano flush type 15 Amp flush type 240 Volt, complete all as specified and directed.
S & F Socket out let 2 in 1,5/15 Amp flush type 240 Volt, complete all as specified and directed.
S&F bell push flush type 5 Amp, complete all as specified and directed.
S&F bell ding dong musical ,AC, 230 Volt, single pole, complete all as specified and directed.
Supply and Fixing ceiling rose PVC / Poly carbonate, Isolated body, three terminal AC 230 volts complete all as specified and directed.
S & F in replacement of fan regulator 150watts electronic flush socket type with five stepped range hum free complete all as specified and directed.
M & L for replacement of lamp holder, PVC / Poly carbonate, insulated body modular type with back plate batten/angle type for batten fittings complete all as specified and & directed
Supply and fixing LED lights fitting 1x 10W, 220V,AC 2 feet decorative box type with driver, holder includingLED tube light connecting up with three core flexiblecopper conductor cable of suitable size from ceiling rose complete complete all as specified and as directed.
Supply and fixing LED lights fitting 1x 20W, as with 220V,AC 4 feet decorative box type with driver, holder includingLED tube light connecting up with three core flexiblecopper conductor cable of suitable size from ceiling rose complete complete all as specified and as directed.
S&F indoor decorative LED City-3 light fitting suitable for & including single 12 Watt LED lamp with polycarbonate body with upper globe complete all as specified and directed.
Supply and Fix LED lamp 12 Watt, 230 V , AC integrated circuit complete all as specified and directed.
Supply & Fixing Security light fitting, LED type, 20 Watt, 6000 K, pressure die cast housing with prismatic polycarbonate diffuser & indvl LEDs as light source with integrated electronic driver complete with M&L GI pipe mounting bracket of size 25/32 mm dia and 1.20 m long fixed to wall with and including nut, bolts and GI clamps of size 50 x 6 mm as required including two coats of synthetic enameled paint over a coat of primer and making connection with three core 23/.0076 rubber insulated copper cable from ceiling rose to connector of street light complete all as specified and directed.
M&L for sub main wiring with two single core 4.0 Sqmm (FRLS) copper conductor PVC unsheathed cable medium grade including PVC conduit (appropriate size) concealed in wall for sub main connection including 4.0 Sqmm (FRLS) PVC insulated multistranded unsheathed copper conductor used as a earth wire to common earth and connection to earth dolly all as specified. ( Note :- Two runs of 4.0 sqmm (FRLS) and one run of 2.5 sqmm (FRLS) copper conductor shall be measured as one unit length.) complete all as specified and directed.
Taking down carefully ceiling fan and keeping in safe custody for reuse at site after bldg repair incl Painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. ( painting and minor repairs etc complete all as specified and directed.
Taking down Electric meter carefully and refixing the same after bld repair, incl the same fixed on new laminated sheet etc as reqd at site complete all as specified and directed directed by Engineer-in-Charge.
S&F MCB SPN 40 Amp 240 volt complete all as specified and directed by the Engr-in-Charge.
S&F MCB single pole 6 to 32 Amp 240 Volt 'B' curve 10 KA complete all as specified and directed by the Engr-in-Charge.
S&F MCB Triple pole and neutral 40 Amp 415 Volt 'B' curve 10 KA complete all as specified and directed by the Engr-in-Charge.
Supply and fix flush sheet metal enclosure SPN DB 8 way with double door IP-42 protection detachable gland plates, flush mounting for MCB fitted with bus bar , earth bar and neutral links complete including taking down old unsv complete all as specified and directed.
Supply and fix Meter box flush on wall of suitable size as existing space made out of CRCA sheet of 2mm thick indoor type totallty enclosed weather, dust and vermin proof with front opening hinged door and locking aragement with angle iron frame alround panel body duly grouted on wall, having inner shell for fixation of SPN DB 8 way and space for fixing single phase KWH meter of suitable capacity 01 Nos , copper lugs, spacers, Mounting Channel, rubber gasket, locking knowbs, Hylam sheets pieces, PVC shriknable connections,suitable compartments and epoxy power spray painted with one coat primer complete including taking down existing complete all as specified and as directed. Note:- All connection wiring with 6 sq mm PVC insulated single core multistranded copper conductor drawing through PVC flexible conduit and connected with appropriate size copper thimbles.
Supply and fix flush sheet metal enclosure TPN DB 4 way 415 V with double door IP-42 protection detachable gland plates, flush mounting for MCB fitted with bus bar, earth bar and neutral links complete including taking down old unsv complete all as specified and directed.
Material & Labour for earthing complete including taking out old unsv and replace with galvanised steel earth plate 600x600x 6mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 meters below normal ground level, surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate using 4 mm dia GI wire as earth wire electrode moulded and rivetted to earth plate at one end and connected to main switch/ control switches of buildings at another end, GI earth wire encased in and including 15 mm dia GI 'light grade' pipe from upper end of earth plate upto main switch board of building including 20 dia bore GI pipe 'light grade' as water pipe from earth chamber and including excavation and earth work, PCC 1:3:6 type C1 chamber and MS angle iron frame 40x40x3mm and RCC cover 40mm thick (1:2:4) type B1 using 20mm graded stone aggregate reinforced complete all as specified and directed.
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m incl making suitable fixing arrangement and making suitable opening etc and match with existing surface as reqd at site will be incl in quoted rates and connection complete all as specified and directed.
Taking down carefully exhaust fan in any description and refixing the same on existing place after cleaning etc incl fixing arragement if reqd at site will be incl in quoted rates and connection complete all as specified and dirceted.
Taking down carefully service connections of any descriptions from pole, wall or service brackets etc including making good disturbed surface to match with the existing surface complete all as specified and directed.
Excavation in trenches not execeeding 1.5m in depth and getting out hard/dense soil for laying of LT UG cables/base for pole etc complete all as specified and directed.
M & L for sand cushiong in laid in trenches for laying of LT UG cables complete all as specified and directed.
M & L bricks common burnt clay building, sub base 'B' for LT UG cable protection complete all as specified and directed.
S&F GI tubes light grade of dia 40mm with all fitting and fixed complete for protection of LT UG cables laid to walls or in floors or along with poles etc complete all as specified and directed.
Supply and laying & testing UG cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armored, electric power cables (Heavy duty) 1100 Volts graded with slandered aluminium conductor of size 10 sqmm 4 core complete all as specified and dirceted. Note : Tenderers may note that amount of credit Rs 1,23,018.00 will be deducted from the total amount arrived, at the time of Acceptance of contract.
Goel Enterprises
M/S Rajeev Sharma and Co.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .