Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹99.2 LAccepted-AOC PLOT NO 19 PAOTA C 3RD ROAD JODHPUR 342001 | JODHPUR | JODHPUR | RAJASTHAN | 342001 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹1.0 Cr+₹3.4 L (3.41%)Rejected-Finance 37 SUBHASH NAGAR AIR FORCE JODHPUR 342 008 | JODHPUR | JODHPUR | RAJASTHAN | 342008 | L2 | Rejected-Finance Being L2 | |
| 3 | Rejected-Technical 19 PAOTA C IIIRD ROAD JODHPUR RAJ 342001 | JODHPUR | JODHPUR | RAJASTHAN | 342001 | - | Rejected-Technical Not Approved |
Tender Value
₹1.0 Cr
EMD Value
₹1.8 L
Closing Date
25 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE AF JODHPUR
HQ CWE AF JODHPUR
PROVN OF CERTAIN WORKS SERVICES AT WSA AND ARMOURY AT 32 WING AT AIR FORCE STN JODHPUR
2022_MES_569841_1
85957 E8
Open Tender
Civil Works
Item Rate
360 days
GE AF JODHPUR
AS PER NIT
7 documents required · 7 mandatory
₹1,000
GE AF JODHPUR
₹1.8 L
Yes
25 Feb 2023
19 Dec 2022
27 Jan 2023
19 Dec 2022
25 Jan 2023
11 Jan 2023
Amount
Excavation over area n.exc 1.5m deep and getting out in soft / loose soil completed all as specified and directed
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. and getting out in soft /loose soil completed all as specified and directed
M&L for PCC 1:4:8 type D-2 (40mm graded aggregate) in foundation, sub base, filling and mass concrete completed all as specified and directed.
M&L for Pre-cast cement concrete1:3:6 type C1 (20mm graded stone aggregate) block masonry with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6, completed all as specified and directed
M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished surfaces of concrete completed all as specified and directed
M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished surfaces of concrete completed all as specified and directed
M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished surfaces of concrete completed all as specified and directed
M&L for formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide completed all as specified and directed
M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. for rough finished surfaces of concrete completed all as specified and directed
M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia completed all as specified and directed
Ditto, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders completed all as specified and directed .
M&L for RCC M-25 (design mix) (using 20mm stone aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete completed all as specified and directed.
M&L for RCC M-25 (design mix) (using 20mm stone aggregate) in columns, pillars, piers, posts and struts completed all as specified and directed.
M&L for RCC M-25 (design mix) (using 20mm stone aggregate) in beams, cantilevers, bressummers, over 1.5m span completed all as specified and directed.
M&L for RCC M-25 (design mix) (using 20mm stone aggregate) in Chajja completed all as specified and directed.
M&L for RCC M-25 (design mix) (using 20mm stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like completed all as specified and directed.
Ruturning, filling in, including spreading, levelling, watering and well ramming in layeres not exc 25cm of soft/loose soil completed all as specified and directed.
M&L for hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface completed all as specified and directed.
Removing excavated soil n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point completed all as specified and directed
M&L for rendering 15mm thick in CM 1:4 on fair face of brick-work or concrete surfaces including finish even and smooth (without using extra cement) completed all as specified and directed
M&L for rendering 15 mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement) completed all as specified and directed
M&L for rendering 5mm thick in CM 1:3 on fair concrete surfaces in ceiling finished even and smooth (without using extra cement) completed all as specified and directed
M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed bed 15mm in CM 1:4 (overall thickness of stone & screed 40mm) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete completed all as specified and directed
M&L Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over 10 mm thick plaster (in CM 1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed
M&L for preparing undecorated newly plastered surfaces of ceiling and apply three coat of white wash completed all as specified and directed
M&L preparing undecorated newly plastered surfaces of wall and apply two coat of distemper oil emulsion over one coat of wall primer over and including 3mm thick wall care putty all as specified with approved colour completed all as specified and directed
Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance asper IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces completed all as specified and directed
S&F Mild steel, plain, black sheet 1.25mm thick in steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required completed all as specified and directed
M&L for framed work such as grills, gratings, and hung as gates including pintle hinges, stops, hand-made sliding bolts, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 completed all as specified and directed
S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded completed all as specified and directed
S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded completed all as specified and directed
S&F galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples completed all as specified and directed
S&F Sheet glass 4mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane completed all as specified and directed
M&L for preparation of newly or previously untreated steel surface of any description, over 10cm in width or girth, not otherwise described priming with red oxide, zinc chrome and applying two coat of synthetic enamel (ordinary tint) completed all as specified and directed
M&L for preparing new surfaces of roof and applying two coats of Polyurethane (PU) acrylic based water proofing liquid compound over and including a coat of diluted elastomeric self primer and reinforcement fabric sheet as per manufacturer’s instruction to stop leakage / seepage from roof / wall complete all as specified and directed by the Engineer-in-charge.
M&L for 10mm thick rendering in Cement Mortar 1:3 with water proofing compound @ 3% by weight of cement, on existing concrete surfaces on roof, finishing even and smooth without using extra cement complete all as specified & directed. (Note : water proofing compound measured sapertely)
Supply only integral water proofing compound complete all as specified & directed.
M&L for 75mm thick plain cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in plinth protection laid in panels including necessary fromwork, finished even and smooth without using extra cement complete all as directed.
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out soft / loose soil completed all as specified and directed.
M&L for PCC 1:2:4 type B-2 (40mm graded aggregate) in foundation, sub bas, filling and mass concrete completed all as specified and directed.
M&L for squared rubble walling, Jodhpur type brought upt to courses well bonded, bedded & soildly hearted built in CM 1:4 completed all as specified and directed.
M&L for sand filling under floors or in foundations including watering and consolidation completed all as specified and directed.
M&L for rendering 15mm thick in CM 1:4 on stone masonry including finish even and smooth (without using extra cement) completed all as specified and directed.
Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; completed all as specified and directed.
M&L for preparation of new plastered surface and applying two coats of exterior weather proof water base emulsion (white or tinted) in camouflage pattern (as approved by GE/User unit) over one coat of alkali resistance primer, on surface of wall after finishing the job and leaving premises, clean and tidy, compete all as specified and as directed.
Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified & directed..
Demolition of cement concrete in ground floors and pavings not exc 15 cm thickness ( below or above ground level ) and disposing of debries outside MD land complete all as specified and as directed by Engr-in-Charge
Demolition of Stone slabs & tiles of any description or thickness in floors, aprons etc. Laid, bedded & pointed in any mortar complete all as specified and as directed by Engr-in-Charge
Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified & directed..
Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.
Taking down old existing roof treatment (APP membrane and plaster) including roughening surfaces of old concrete floor by picking sweeping clean and washing down with water to remove dost, etc, including removing debris outside of MD land complete all as specified & directed.
M&L for PCC 1:2:4 type B-0 (12.5mm graded stone aggregate) as in roof padding/mass concrete, cement concrete in roof kerbs or mud stops, rounded or chamfered on edges completed all as specified and directed.
M&L for brushing neat cement slurry @ 3 Kg of cement per sqm of surfaces complete all as specified & directed.
M&L for 10mm thick rendering in Cement Mortar 1:3 with water proofing compound @ 3% by weight of cement, on existing concrete surfaces on roof, finishing even and smooth without using extra cement complete all as specified & directed. (Note : water proofing compound measured sapertely)
M&L for anti-termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified & directed.
Providing and injecting chemical emulsion for Post Constructional Anti-termite Treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified & directed.
M&L for anti-termite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified & directed.
S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
M&L for rendering 15mm thick in CM 1:6 on stone masonry surfaces or surface other than fair faces of brick work finished even and smooth (without using extra cement).
M&L for preparation of new surface on walls and applying two coat of oil emulsion distemper, white or tinted over a coat of primer complete all as specified and directed.
M&L for preparation of old surface on walls and applying a coat of oil emulsion distemper, white or tinted over and including one coat of 3mm wall care putty complete all as specified and directed.
M&L for complete removal of existing treatment and applying a two coat of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance asper IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces completed all as specified and directed complete all as specified and directed . Note:- Quoted rate shall be deemed to be included for work in buildings/structure of any height.
M&L for Gl sillhout frame work of size 605mm x 605mm for false ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I.
S&F 8mm thick PVC white colour board of size 600mm x 600mm fixed on existing frame work gride complete all as specified and as directed by the Engr-in-Charge
S&F 5 mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame complete all as specified and as directed by the Engr-in - Charge.
S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and as directed by the Engr-in - Charge.
S&F powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket
M&L for 9mm thick, Prelaminated particle board, interior grade, prelaminated one side with decorativechoice lamination & other side balancingwhite lamination,fixed in aluminium partation with rubber beading completed
S & F 5.5mm thick sheet glass ordinary quality in square exc 0.50 Sqm each in each pane complete all as specified and as directed by Engr-in-Charge .
Cleaning of SWT of plan area exc. 30Sqm but not exc 60sqm and depth upto 3.00mtr by taking out sluge and sludge loading to the cart/ lorry & depositing out side MD land including bailing out water by the manually or by and mechanical means all as specified and directed by Engr-in-Charge. Note :- (i) Rate quoted includes bailing out water from SWT and removing sludge depositing out side MD Land
M&L for 40mm thick 2nd class seasoned hard wood boarding planed both sides, edges tongued and groved rounded or chamfered fixed as in rifle racks base / sides with glue pinned at joints or with dash fasteners of required dia and length including necessary cutting, drilling notes etc complete all as specified and directed.
M&L for 2nd class seasoned hardwood, plain, solid, straight chowkhats and frames wrought, rounded or chamfered put together with glue pinned at Joints, fixed in position with hold foots, plugs or with dash fasteners of required size as in rifle racks complete all as specified and directed.
M&L for preparing surfaces of timber piles and diping in a hot mixture of tar and creosote in the proportion of 20 kg coal tar pitch to 25 litres of creosote oil, for 4 mins complete all as per manufacture instruction and as directed.
M&L for preparation of new or previously untreated wooden surfaces of any description, over10cm in width or girth and apply filler coat with wood filler liquid transparent, staining with spirit, varnishing under coating and finishing coat with synthetic varnish
M&L for preparation of old treated wooden surfaces of any description, over10cm in width or girth and apply filler coat with wood filler liquid transparent, staining with spirit, varnishing under coating and finishing coat with synthetic varnish
S&F toilet paper holder white with flat recessed type stainless steel in repairs complete all as specified and directed.
S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white complete all as specified and as directed by Engr-in-Charge
S&F Health Faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified .
Supply & fixed in repair PVC valveless 10ltr, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified & directed.
Taking down 15mm steel tubing and connection including refixing or reomoval omplete all as specified & directed.
M & L for 15 mm GI tubing medium grade with all fittings fixed to walls, ceiling or laid in floors complete all as specified and as directed by Engr-in-Charge
M & L for 20 mm GI tubing medium grade with all fittings fixed to walls, ceiling or laid in floors complete all as specified and as directed by Engr-in-Charge
S&F in repairs CP Bib taps fancy type 15 mm bore, cast copper alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engr-in-Charge
S&F in repairs CP Pillar taps fancy type 15 mm bore, cast copper alloy, with capstan heads screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks & fly-nuts, screwed for iron pipe complete all as specified and as directed by Engr-in-Charge
S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed by the Engr-in - Charge.
S & F triple layer polyethylene water storage tanks ( cylindrical, vertical with closed top ) hoisted and fixed in position of 1000 Ltrs capacity and ball valves high pressurer PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (minimum weight 15mm-142gms) including taking down old one complete all as specified and as directed by the Engr-in - Charge.
S&F Glazed Vetrified tiles (GVT) 600x600x10 mm thick Non skid/Matt finish (squares/rectangular) area of each tile not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bed in CM(1:6) complete all as specified and as directed by Engr-in-Charge .
S & F glazed ceramic coloured tiles of size 600 x 300 x 10 mm in vertical surface as in dado set and jointed in neat cement slurry & pointed in white cement mixed with pigment to match with color of tiles over and including 10 mm thick rendering in cement motor 1:4 complete all as specified and as directed by Engr-in-Charge .
M&L for 3mm thick PVC laminated plain coloured homogeneous sheets layed over PCC floor laid with approved rubber based adhesive as per manufacturer instruction complete all as specified and diredted.
S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls/Hangars complete all as specified and as directed by the Engr-in - Charge.
S & F 20 mm gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe complete all as specified and as directed by Engr-in-Charge .
S&F in repairs Vitreous China wash basin, white, flat back, size 550x400mm excluding taps, waste chain & plug & porcelain stopper but including brackets complete all as specified and as directed by Engr-in-Charge .
S&F 32mm dia waste coupling of PTMT,half or full threaded (minimum weight 45 gms), complete all as specified and directed by Engr-in-Charge.
S&F in repair Stop valves 15 mm bore fancy type, CP, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed.
Supply, Laying, jointing and testing in replacement of XLPE LT cable PVC insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade of any description and any make laid intrenches/ducts, floors fixed to walls etc.complete all as specified and directed by Engineer-in-Charge for the following sizes (a) LT aluminium conductor cable of size 70 Sqmm 3.5 core
(b) LT aluminium conductor cable of size 35 Sqmm 3.5 core
(c) LT aluminium conductor cable of size 6 Sqmm 2 core
Supply, installation, commissioning and testing LT panel board of suitable shape and size for 3 phase, 4 wire,415 Volts AC, 50 Hz supply, outdoor cubical type, dust and vermin proof, pedestal mounting type suitable for outdoor applications having suitable shape, size canopy on top, made out of 3.15 mm thick MS sheet with using 40mmX40mmX5mm angle iron frame and supports, duly finshed with powder coated using two coats of synthetic enamel paint of approved colour over a coat of red oxide primer all over steel surfaces complete with separate compartment of suitable shape and size with shutter and locking arrangement for each switchgear and including PCC work for fixing panel legs and copper bus bar 3 phase rating of 250 Amps conforming of following:-(i) Incomming :-(a) MCCB , 4 P, 100 Amp,25 KA thermal magnetic release type-01 No,(b) Digital voltmeter (0-500 V)-01 No.,(c) Ampear meter (0-500 V), with CT -01 No.(ii) Outgoing :-(a) MCCB 4 P, 32 Amp, 16 KA thermal magnetic release type-03 Nos,(b) MCB SPN,32 Amp-02 Nos
M & L for Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normalless'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 SSR Part-I 2009 and specified or indicated including excavation and earth work in any type of soil PCC (1:3:6) type C1 in chamber, precast RCC 50mm thick in cement concrete (1:2:4) type B1, reinforced with welded steel wire fabric or XPM (Weight not less than4.00 Kg/Square metre) with PCC frame, funnel with wire mesh, 20mm bore medium grade GI watering pipe, lugs, 15mm mmbore midium grade GI protection pipe, test point etc complete all as specified and directed. Note:- (i) Item includes the cost of 7.5 metre GI pipe for protection of earth lead. (ii) Item includes the cost of 7.5 metre GI earth lead.
Material & labour for Tibba sand filling with clean dry fine sand unwashed including gently punning around cables in trenches for cable protection complete all as specified and directed by Engineer-in-Charge.
Material & labour for stone slab 40mm to 50mm thick rough dressed Jodhpur stone patties/ slab cover in trenches for protection of cable 25 cm to 30 cm wide and not less than 50cms in length laid dry abutting each other with gap between adjacent slab not exceeding 10mm over sand cushioning complete all as specified and directed by the Engineer-in-Charge.
S & F Tubes, 'medium grade' galvanised, 15mm bore with all fitting and fixed complete to walls and ceilings or laid in floors all as specified and directed by Engineer-in-Charge.
Supply and fix Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed of size 15mm bore all as specified and directed by Engineer-in-Charge
Cutting the existing GI line of 40 mm bore, supply and fix the tee of 40X40X15mm including making thred etc complete all as specified and directed by Engineer-in-Charge
Supply and fix air cooled split unit air conditioner electric driven single phase of capacity of 2 TR, BEE 5 star rated complete all as specified and directed by Engineer-in-Charge.
Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 260 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5 KVA.
Supply, installation,commis-sioning of Water cooler partially stainless steel, electric driven single phase having approx storage and nominal cooling capacity 40/80 ltrs. Complete all as specified and directed by Engineer-in-Charge.
Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 2 KVA.
Supply and fix Flame proof switch socket & plug combined in LM6 , 25A,500V, 2P+earth.Complete all as specified and directed by Engineer-in-Charge. Make ; Sudhir Cat Part NoSS/OA/1010-3
Supply and fix desert metal air cooler electric driven (single phase), having nominal air flow capacity of 5000 CuM per hour (or nearest size).
Supply, installation and testing and commissioning air cooling machine /air washer consisting air velocity 9.2 mtrs/sec discharge three phase machine of capacity 4000cum/hr air blow including required PCC foundation for mounting air washer as per OEM design comprising of following:- (a) Cabinet:- Double skin cabinets. (b) Base:- The total assembly is mounted on a horizontal member of heavy galvanised steel channel with die cast aluminium corners for jointing together with lifting hole on all corners. (c) Panels:- Panels are made double skin outer skin 0.6 mm coated and inner skin 0.6mm plain out of extruded aluminium hollow profile with PUF fix to the rugged frame work made on aluminium/GI section with fastners/nuts/surts. The cabinet is air tight using self-adhesive tape and gasket. (d ) Inspection Window:- Air washer have proper accessibility for regular maintenance through hinged service door.(e) Cellulose Pad: The cellulose pads are designed for max saturation efficiency, being having large air surface act area in 7 mm flute size. (f) Filters: The standard pre filters made of GI/AL construction having efficiency 90% down to 10% micron. (d) Water Tank; Water tank made of mild steel/stainless steel with anti-corrosive coating(FRP/Epoxy). (h) Fan TEFC motor for 415 volts and drive set:- The fan of suitable capacity curved design, statically and dynamically balanced with low noise and high efficiency. The fan motor of suitable capacity mounted on GI/MS chnnel slide rail with provision with easy belt tension . The complete assembly is mounted on rubber vibration pad . The fan is connection to main casing using fire and moisure resistance flexible canvas connection ensuring low operating noise and vibration. The drive pulley are tapper bushed dully balanced with proper size of V belts. (j) Accessories: (1) Fan outlet dampers. (2) Drift eliminator PVC/GI. (3) Microprocessor based control panel with sensor safety switches and indicators including complete wiring.
Supply and install rotational moulded polyethelene water storage tank (cylindeical vertical with closed top) of cap 500 ltrs hoisted and fixed in position all as specified in SSR Part-I including 20mm ball valve high pressure PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed.
S & F Stop valve gun metal 15mm dia wheel head screwed both ends for iron pipe
M & L for PVC connections 15 mm size with PTMT nuts of length 450 mm
Supply, assembly and erection of GI sheet with TDF flame rectangular/ square duct made out of 'L' shaped hollow profile, duly fatory boxed,incl all accessories such as corner,cleat, carriage bolt, Gasket and appropriate sealed on longitudinal joints etc. Complete of size 22 gauge.
Providing and making Misc civil work like masonary wall cut outs and jurry work to pass pipes cables and ducts at side also required PCC foundation for tank and cooler etc. The cut outs shall be closed and finished to the orignal finish after completion of work.
Taking down carefully copper/aluminium point wiring light ,fan, socket or power complete,such as switches, ceiling roses, pendents, regulators, sockets etc.removing materials to store for keeping in safe costudy or for taking credit (credit for above items should be made as per conditioned separately) and making good disturbed surface of walls, floors etc. Complete all as specified and directed by Engineer-in-Charge.
Taking down MCB DB with MCB any type and any capacity all as specified and directed by Engineer-in-Charge.
Taking down Sub main wiring any type any size all as specified and directed by Engineer-in-Charge.
S & F Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) Complete all as specified and directed by Engineer-in-Charge.
Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers Complete all as specified and directed by Engineer-in-Charge.
-- do -- but size 450 mm sweep.
Supply and fixing LED light fitting 2X16W flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass, with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size.
Taking down & refixing of light fittings flame proof any size, any make and any watts with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size.
S & F Triple pole and earth encolsure with a three pin and earth plug with socket complete with one triple pole MCB 63 Amps, 415 V
S&F sub main wiring with multistranded copper conductors 1100 volt grade IS- 694 marked drawn through and including in steel conduit pipe medium grade ISI marked (not less than 20 mm dia)along with fittings and accessories all fixed concealed on wall and surface on ceiling and also including the specified runs of specified size earth continuity conductor of similar type of cable complete all as specified and directed by Engineer in charge. (2 runs of main cable one run of earth wire one run of steel pipe will be measured as an one run) (a) 2 Run of 4.0 Sqmm cable and one run of 4.0 sqmm cable for earth wire.
All as per Item No 125 but 2 Run of 6 Sqmm cable and one run of 6 sqmm cable for earth wire
All as per Item No 125 but 2 Run of 1.5 Sqmm cable and one run of1.5 sqmm cable for earth wire
All as per Item No 125 but 2 Run of 2.5 Sqmm cable and one run of 2.5 sqmm cable for earth wire
M&L point wiring with 1.5sqmm PVC insulated 1100 volt grade IS -694 FRLS multi stranded but unsheathed copper conductor cable drawing in PVC conduit and terminated in existing terminal box with 3 mm thick plastic laminated sheet cover for fixing of switches,sockets and fan regulator including continuous earth wire with copper cable S/C 1.5 sq mm similar description of main cable connected to main earth dully complete all as specified and directed by Engineer in Charge. (a) -do- as above but for one light/ fan/Exhaust fan point controlled by one switch.
(b) -do- as above but for 5 amp socket on same board
(c) -do- as above but for 5 amp socket on independent board
(d) -do- all as above but for One bell point controlled by one bell push.
(e) All as per item No 126 above but with 2.5 Sq mm cable for Independent one 6 pin 5/15 Amps socket outlet In and including 2.5 Sq mm PVC insulated copper conductor unsheathed 1100 v grade IS -694 FRLS cable for continuous earth wire.
S&F in repair switch piano 5 amps flush type single pole one way
S&F in repai switch piano 16 amps flush type single pole one way
S&F in repair socket outlet flush type 2 in 1, 5 amps .
S&F in repair socket outlet 2 in 1, 3 pin, 5 and 15 amps flush type
Supply and fix Switch Bell push flush type, 5 Amps 240 volts.
Supply and fix Call bell ding dong muscial type , AC, 230 Volts, Single pole.
S & F Ceiling rose, 3 phase/PVC/polycarbonate, isolated body
Supply and fixing LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp.
Supply and fixing post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete.
S & F Tubes, 'light grade' galvanised, 40mm bore with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-Charge.
S & F LED vertical surface mounting pressure die-cast aluminium housing (light engine)well glass luminaires, environmental friendly,energy saving long the corrision resistant with high power LED as light 'source' 40 watt (Warm white variant) complete all as specified and directed by Engineer-in-Charge.
S & F Flame proof weather proof MCB DB TPN 4 way complete all as specified and directed by Engineer-in-Charge.
S & F Flame proof weather proof MCB DB SPN 8 way complete all as specified and directed by Engineer-in-Charge.
DEV INDUSTRIES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .