CONSTRUCTION OF CONVENTIONAL TYPE BRTS BUS SHELTER AT RATNAMALA JUNCTION,UNDER FLYOVER BRIDGE IN NORTH (KATARGAM)ZONE, SURAT(WORK NO.01)(2nd Attempt)

Name of Work :- CONSTRUCTION OF CONVENTIONAL TYPE BRTS BUS SHELTER AT

RATNAMALA JUNCTION,UNDER FLYOVER BRIDGE IN NORTH (KATARGAM) ZONE, SURAT

(WORK NO.1) (2nd Attempt)

Location - Katargam

SMC - S.O.R. 2024-25

Description Qty. Rate Unit Amount

WORK UP TO PLINTH LEVEL

Providing and installing barricades including supplying,

paiting with flourscent paint/white paint and fixing CGI

sheet 24 SWG of required height as per site condition

and M.S. angle of required size to restain at 2.5 mt. c/c

1 and dismantalling the same after completion of work 210.00 124.72 S.M.

and allowing for movement of traffic as per drawing

and as per instruction from engineer in charge

(SOR -Road work-SMC 2023-24, Pg No. 13, It No.

1,PART-V)TRAFFIC SAFETY,TRAFFIC CONTROL AND

Reuse of the above barricades in item 24.1 for traffic

2 safety purpose without procuring new barricades. 210.00 28.32 S.M.

(SOR -Road work-SMC 2023-24,, Pg No. 13, It No.

2,PART-V)TRAFFIC SAFETY,TRAFFIC CONTROL AND

Provision of Solar Blinkers For barricading for limited

period at suitable locations as per requirement during

the construction in construction zone comprising of

warning zone, approach transition zone, working zone

and terminal transition zone Etc.

(SOR -Road work-SMC 2023-24,, Pg No. 13, It No.

6,PART-V)TRAFFIC SAFETY,TRAFFIC CONTROL AND

Demolition including stacking of serviceable materials

4 with all lead and lift. (i) RCC Work

(SOR SMC 2024-25, Pg No. 18, It No. 1) Demolition

Items / Items for Scrap Value

Excavation for foundation including sorting out and

stacking off useful materials and disposing of the

excavated stuff up to 50 mt. lead and all lift, watering

(A) loose or soft soil with Manual Labours

Description Qty. Rate Unit Amount

SMC SOR 24-25, PAGE NO 1 IT NO

Disposing off the excavated stuff of above items for

lead of (E) 400 to 500 m

Boring holes 3.5 mt.deep in ordinary soil ( for cast

in situ piles) & disposal of the surplus excavated

soil as directed within a lead of 50 M. For

following diameter of piles.

SMC SOR 24-25, ITEM NO. 94, PG. NO.

Earthwork for embankment including breaking

clods, dressing with all lead and lift and including

watering rolling and consolidation of subgrade in

8 layers at O.M.C. to required dry density including 6.00 176.15 C.M.

filling the depression which occur during the

process using power roller 8T to 10T.(E) From

Borrow area within 3.0KM. lead (more than

R & B SOR, ITEM NO.- 26004EA

Providing & laying C.C 1:3:6 (1cement : 3 coarse

sand : 6 Crushed stone agg 20m.m Nominal size)

&curing comp. excl. cost of form work in :(a)

foundation & Plinth

SMC SOR 24-25, PAGE NO 1 IT NO 5 21.00 3,095.25 C.M.

Providing & laying cement concrete 1:2:4 (1

cement : 2 sand : 4 graded stone agg. 20 mm

nominal size) & curing comp. Includ. cost of form

work but exclu. Cost of reinforcement for

reinforced concrete work in : Grade Slab

(C) Grade slab 23.00 3,741.69 C.M.

(SOR SMC 24-25 Pg No. 9 It No. 95)

Providing, mixing, placing, compacting by machine

vibrator, curing, testing M25 Design mix concrete

as per IS 456:2000 (latest revision) and as per

tender specification in all items including cost of

form work and rendering but excluding cost of

(A) foundation, footing, base of columns and mass

SMC SOR 24-25, PAGE NO 14, Design Mix

Description Qty. Rate Unit Amount

Providing, mixing, placing, compacting by machine

vibrator, curing, testing M25 Design mix concrete

as per IS 456:2000 (latest revision) and as per

tender specification in all items including cost of

form work and rendering but excluding cost of

(1) Having cross sectional area up to 0.085sq.mt. 0.00 12,930.68 C.M.

(2) Having cross sectional area more than 0.085 sq.

mt .up to 0.12 sqmt.

(3) Having cross sectional area more than 0.12 sq.

SMC SOR 24-25, PAGE NO 14, Design Mix

(1) Having cross sectional area upto 0.08 sq.mt. 0.00 9,083.57 C.M.

(2) Having cros sectional area more than 0.08 sq.

mt and upto 0.12 sq.mt.

(3) Having cross sectional area more than 0.12 sq.

(G) Vertical and horizontal fins 0.00 9,483.21 C.M.

SMC SOR 24-25, PAGE NO 14, Design Mix

Providing & laying C.C 1:3:6 (1cement :3 coarse

sand :6 crushed stone agg. 20 m.m Nominal size)&

curing comp. incl. cost of from work in: wall caps/

Providing & fixing IS Mark TMT Bar FE 500d

reinforcement for R.C.C. work incl. bending,

binding & placing in position etc.comp.---Ground

Upto G.L./P.L. 5945.00 77.29 Kg.

(SOR SMC 24-25,Pg No. 1 It No. 8)

Providing & construction brick work using Fly Ash

bricks having crushing strength not less than

Kg./sq.cm. in foundation & plinth in C.M. 1:6 (1

cement:6 sand ) etc. comp. - Ground Floor,P.L.

Filling available excavated earth (excluding rock) in

trenches. plinth, sides of foundations etc. in layers

16 not exceeding 20 cm. in depth consolidating each

disposited layer by ramming and watering.

(SOR SMC 24-25, Pg No. 1 It No. 10) 75.00 136.92 C.M.

Description Qty. Rate Unit Amount

Filling in foundation and plinth with murrum or

selected soil in layers of 20cm. thickness including

watering, ramming and consolidating etc.

carrying out plinth treatment to post

construction/existing structure by spraying

chemical solution for termite control treatment

including labour and material consisting with ISI

specification using chlordene and chiorpurfiles

18 EC as per 6131_part II concentration weight one 97.00 87.03 S.M.

litter give 1% concentration inclusive of one litter

chemicals emulsions application at the rate of

litter chemicals /sqmt of surface is recommended

(SOR SMC 24-25, Pg No. 12 It No. 127)

Providing & Applying 20mm. Th. Heavy Roller

plaster on walls or similar surfaces at all floor

levels consisting of 12 mm av. Th. Backing coat of

C.M. 1:3 (1 cement:3 sand) & 8 mm. th. Finishing

19 coat of C.M. 1:1 (1cement: 1 sand) apply thick 82.00 324.00 S.M.

cement slurry and apply roller horizontal as well as

vartical ( two times ) up to good quality and size of

grain in elevation as per directed by engineer

(SOR SMC 24-25, Pg No. 3 It No. 28)

Description Qty. Rate Unit Amount

Providing & applying two coats of weather shield max

paint (3 coats may be required in case of darker

colours.)of ICI Dulux or Apex Ultima of Asian Paint

including applying exterior acrylic primer coat as per

manufacturers specification and directions in shade and

colour approved by architects, on exterior surfaces of the

building including scaffolding, preparing the surface,

watering, curing etc. complete and as directed by the

architects and manufacturers Surface Preparation :

surface is thoroughly clean, dry and free from all loose

dirt, chalk, grease, fungi,algae and flaking paint. This can

be achieved by brushing with a wire/ stiff coir brush,

20 followed by water jetting if required. Fill up all minor

cracks and defects with white cement and sand mixture in

the ratio 1:3. For application on previously painted wall,

previous coatings of paint must be thoroughly scraped off

and Clean the surface thoroughly using wire

brushes.Priming: Apply a liberal coat of exterior acrylic

primer and allow it to dry for 4-5 hours.Application of

putty is not recommended.

Minimum 4-6 hours duration is required between each

coat of weather shield max paint

SMC SOR 24-25, , COLOR WORK ITEM NO.- 17 82.00 82.00 S.M

TOTAL COST UP TO PLINTH-(A)

WORK ABOVE PLINTH

Providing, mixing, placing, compacting by machine

vibrator, curing, testing M25 Design mix concrete

as per IS 456:2000 (latest revision) and as per

tender specification in all items including cost of

form work and rendering but excluding cost of

(1) Having cross sectional area up to 0.085sq.mt.

Ground Floor 0.00 12930.68 C.M.

(2) Having cross sectional area more than 0.085 sq.

mt .up to 0.12 sqmt.

Ground Floor 4.00 11253.32 C.M.

(3) Having cross sectional area more than

Ground Floor 0.00 9288.03 C.M.

(SOR SMC 24-25,Pg No. 14 ,Design Mix Concrete)

Description Qty. Rate Unit Amount

(1) Having cross sectional area upto 0.08 sq.mt.

Ground Floor 0.00 9083.57 C.M.

(2) Having cros sectional area more than 0.08 sq.

mt and upto 0.12 sq.mt.

Ground Floor 9.00 8155.37 C.M.

(3) Having cross sectional area more than

Ground Floor 1.00 7067.84 C.M.

(SOR SMC 24-25, Pg No. 14 ,Design Mix Concrete)

(2) Slabs having more than 8 Cm & upto 10 Cm

Ground Floor 0.00 7965.38 C.M.

(3) Slabs having more than 10 Cm & upto 13 Cm

Ground Floor 12.00 7377.92 C.M.

(4) Having more than 13 cm. Thickness

Ground Floor 0.00 6793.97 C.M.

(SOR SMC 24-25, Pg No. 14 ,Design Mix Concrete)

Ground Floor 1.00 9963.33 C.M.

(SOR SMC 24-25, Pg No. 14 ,Design Mix Concrete)

Ground Floor 3.00 7119.46 C.M.

(SOR SMC 24-25, Pg No. 14 ,Design Mix Concrete)

Providing & fixing IS Mark TMT Bar FE 500d

reinforcement for R.C.C. work incl. bending,

binding & placing in position etc.comp.---Ground

Ground Floor 5345.00 77.29 Kg

(SOR SMC 24-25, Pg No. 2 It No. 15)

Brick work using common burnt clay building

bricks having crushing strength not less than

kg./Sq.Cm. in Cement Mortar 1:6 (1- Cement : 6 -

fine sand)(C) Fly Ash Bricks

Ground Floor 17.00 4729.83 C.M.

(SOR SMC 24-25, Pg No. 2 It No. 16)

Description Qty. Rate Unit Amount

Half brick masonry in common brunt clay building

bricks having crushing strength not less than

Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -

coarse sand ) in foundation and plinth (C)Fly Ash

Ground Floor 10.00 712.81 S.M.

(SOR SMC 24-25, Pg No. 2 It No. 17)

Providing & Applying 10mm.th.cement plaster in

single coat on brick/ concrete walls similar

surfaces for plastering & finished even & smooth

25 with a floating coat of cement slurry mixed with

admixture of lime or neeru in required proportion

etc. comp. in C.M 1:3 (1 cement : 3sand) (A) For

wall and similar surfaces -- Ground Floor

(A) for wall and similar surfaces

Ground Floor 111.00 199.28 S.M

(B) for ceilings and soffits of stairs

Ground Floor 119.00 225.34 S.M

(SOR SMC 24-25, Pg No. 3 It No. 24)

Providing and fixing 150 mm wide, approved

quality chicken wire mesh (FRP / PVC)at junction of

brick work and RCC work or two dissimilar

26 surfaces, at all heights fixed by nails, rowal plugs or

tag by cement mortar 1:3 before applying the

plaster, including curing, scaffolding all complete

Ground floor 46.00 102.00 S.M

(SOR SMC 24-25 Pg No. 11 It No. 124)

Providing & Applying 20mm. Th. Heavy Roller

plaster on walls or similar surfaces at all floor

levels consisting of 12 mm av. Th. Backing coat of

C.M. 1:3 (1 cement:3 sand) & 8 mm. th. Finishing

27 coat of C.M. 1:1 (1 cement: 1 sand) apply thick

cement slurry and apply roller horizontal as well as

vartical ( two times ) up to good quality and size of

grain in elevation as per directed by engineer

Ground Floor 132.00 324.00 S.M

(SOR SMC 24-25.Pg No. 3 It No. 28)

Description Qty. Rate Unit Amount

Providing & applying single coat of textured finish

at external surface at all floor levels with three

coats of weather proof exterior paint of approved

standard brands make (Asian/Dulux/Narolac) or

Equivalent at outer side of the building on RCC or

Masonary walls. Rate to include for all labour,

materials, staging, scaffolding, cleaing, curing etc.

application of texture after throughly brushing

th`e surface to give an even shade free from

mortar dropping/other foreign matter etc.

complete. application of textures & paints must be

as per company's standard instructions. Texture

and colour selection as per approved by engineer

RATE ANALYSIS -

Providing throating or plaster drip and moulding it

to R.C.C. chajja etc. comp.. For all floor

Ground Floor 29.00 43.74 R.M

(SOR SMC 24-25, Pg No. 3 It No. 29)

Providing 20 mm deep finished groove in plaster in

line and level etc. Comp. For all Floor (M.R.)

Ground Floor 72.00 50.00 R.M

(SOR SMC 24-25, Pg No. 3 It No. 30)

Providing & applying two coats of weather shield max paint

(3 coats may be required in case of darker colours.)of ICI

Dulux or Apex Ultima of Asian Paint including applying

exterior acrylic primer coat as per manufacturers

specification and directions in shade and colour approved by

architects, on exterior surfaces of the building including

scaffolding, preparing the surface, watering, curing etc.

complete and as directed by the architects and

manufacturers Surface Preparation : surface is thoroughly

31 clean, dry and free from all loose dirt, chalk, grease,

fungi,algae and flaking paint. This can be achieved by

brushing with a wire/ stiff coir brush, followed by water

jetting if required. Fill up all minor cracks and defects with

white cement and sand mixture in the ratio 1:3. For

application on previously painted wall, previous coatings of

paint must be thoroughly scraped off and Clean the surface

thoroughly using wire brushes.Priming: Apply a liberal coat of

exterior acrylic primer and allow it to dry for 4-5

hours.Application of putty is not recommended.

Minimum 4-6 hours duration is required between each coat

SMC SOR 24-25, , COLOUR WORK ITEM NO.- 17 132.00 82.00 S.M

Description Qty. Rate Unit Amount

NOTE :- (1) The whole work is to be executed

through specialized agency with a guarantee of

(Ten) years given on a prescribed proforma duly

stamped (2) The rate shall include for work

at all floors & conducting water proof test as

directed. (M.R.)

(B) Providing and laying integral cement based water

proofing treatment including preparation of surface as

required for treatment of roofs, balconies, terraces etc.

consisting of following operations. (a) Applying and grouting

a slurry coat of neat cement using 2.75 kg/sqm of cement

admixed with proprietary water proofing compound

comforming to IS:2645 over the R.C.C. slab including cleaning

the surface before tratment. (b) Laying cement concrete

using broken bricks/brick bats 25 mm to 100 mm size with

32 50% of cement mortar 1:5 (1 Cement : 5 Coarse sand)

admixed with proprietary water proofing compound

conforming to IS:2645 ,brick bats is finally covered by

jointless cement plaster 20mm th. in C.M. 1:4 added with

special water proofing compound confirming to IS:2645 &

top smooth finished with trowel with false chequered

marking of 300 mm.size.The treatment is carried along the

vertical surface of the parapet & other adjoining wall up to

height of about 300 mm in a shape of quarter round vata Incl.

curing etc. Comp. With average thickness of 120 mm and

SMC SOR 24-25, Page no-6.ITEM NO.- 62-B 104.00 511.00 S.M

Providing and laying broken china mosaic flooring for

terrace using 12mm to 20mm broken pieces of glazed

tiles to be laid over cement mortar 1:3 to plain or slope

and to be tempered to bring mortar creme out upto

surface using white cement including rounding off

junctions and extending them upto 15 cm along the

wall clearing with water and oxalic acid etc. as directed.

SMC SOR 24-25, Page no-6.ITEM NO-131 104.00 779.70 S.M

Providing and laying polished Kota stone slab flooring

over 20mm (Average) thick base of cement mortar 1:6

(1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty

:1.5 - coarse sand) laid over and jointed with grey

cement slurry mixed with pigment to match the shade

of slab including rubbing and polishing etc. complete.

Providing and laying polished kota stone slab 25mm

thick in risers of steps,skirting Dedo and pillars laid on

10mm thick cement mortar 1:3 (1- Cement : 3 coarse

35 sand) and jointed with gray cement slury mixed with

pigment to match the shade of slab including rubbing

and polishing etc. complete

Description Qty. Rate Unit Amount

Apply two coats of putty and two coats of primer

of approved brand and manufacture on new wall

surface to give an even shade including thoroughly

brushing the surface free from mortar dropping

and other matter and sand papered smooth.

(SOR SMC 2024-25, Pg No. 15, It No. 4,Colour works) 230.00 40.59 S.M

Wall painting (two coats) with plastic emulsion

paint of approved brand and manufacture on

undecorated wall surface to give an even shade

including throughly brushing the surface free from

mortar droppings and other foreign matter and

sand papered smooth.

(SOR SMC 2024-25, Pg No. 16, It No. 5,Colour works) 230.00 83.36 S.M

Providing and fixing precast Rubber Dye

moulded TECTILE concrete flooring tiles, 25 to

30mm avg. thick with grade of concrete M250

pnumatic compressed and Mechanically vibreted

38 and as per approved design over 20mm thick bed

of cement mortar 1:6 jointed with neat cement

slurry with pigment to match the shade of tiles in

proper line & level etc.complete.

RA-Tectile flooring 11.00 3042.47 S.M

Providing & fixing U-PVC pipes Confirming to IS no.

13592 (Type "A") of Prince/Supreme/Jain/Astral/

Tulsi/Finolex make for rain water at all floor levels incl.

39 fixtures like bends, tees, shoe etc joined with resin of

approved brand & manufacture etc. comp. (M.R.) (B)

(SOR SMC 24-25, Pg No. 8 It No. 85) 40.00 325.00 R.M.

Providing & fixing G.I./Aluminum Patti clamps at all

floor levels of approved design to C.I. Or S.C.I pipes

including the cost of cutting holes & making good the

wall etc. Complete - 100 mm. dia. (M.R.)

(SOR SMC 24-25, Pg No. 8 It No. 91) 10.00 20.00 No.

Providing & Fixing Kathi around the vertical PVC

drainage pipes for concealing with cement plaster

41 mm avg thickness(CM 1:3 [1 cement :3 coarse sand])

finishing as per instruction given by Eng. incharge. For

(B) 100 mm /110 mm PVC PIPE

(SOR SMC 24-25, Pg No. 9 It No. 93) 20.00 180.00 R.M.

Description Qty. Rate Unit Amount

Providing and fixing stainless steel ( Grade 304)

railing made of Hollow tubes, channels, plates etc.,

including welding, grinding, buffing, polishing and

making curvature (wherever required) and fitting

the same with necessary stainless steel nuts and

bolts complete, i/c fixing the railing with necessary

accessories & stainless steel dash fasteners

42 stainless steel bolts etc., of required size, on the

top of the floor or the side of waist slab with

suitable arrangement as per approval of Engineer-

incharge, (for payment purpose only weight of

stainless steel members shall be considered

excluding fixing accessories such as nuts, bolts,

fasteners etc.).

Providing and fixing stainless steel ( Grade 304)

(Flat of size 30mm x 5mm. thick), gill with 10mm.

Dia S.S.polished bar etc., including welding,

grinding, buffing, polishing and making curvature

43 (wherever required) and fitting the same with

necessary stainless steel nuts and etc., of required

size as per approval of Engineer-incharge, as per

drawing .(for payment purpose only weight of

stainless steel members shall be considered

excluding fixing accessories such as nuts, bolts,

Providing & fixing in position collapsible steel

shutters with vertical channels 20 x10 x 2 mm.

Braced with flat iron diagonals 20 x5mm size with

44 top & bottom rails of T-iron 40x40x6mm. with

38mm dia. steel pulleys comp. with bolts, locking

arrangements, stoppers, handles incl. applying a

priming coat of Redlead paint etc. comp.

Description Qty. Rate Unit Amount

Providing and fixing of 8 mm thick toughned GLASS

DOORS using 75 mm C-channels in border and

edge profile in between with powder coating with

using Dorma Xl-C 4001 Glass Door PKG EN 3 (Top

Patch-1, Bottom patch-1, Heavy duty Floor Spring-

1, Corner Lock-1); Dorma Xl-C 4003 A Patch fitting

for overpanel and sidelight; Dorma Xl-C 4004 A

Connector for overpanel and Sidelight; Dorma Xl-C

45 4006 Central Connector; Dorma Xl-C 4008 Side 1.00 36337.92 Each

Connector; Dorma Xl-C 3000 H Type Handle

400x22 CTC 300 AND AS PER DRAWING including

all acceessories,locks, material,

silicone,labour,installation, Hole & slote charges

etc. and complete the work satisfactorily as per

instruction of architect or Engineer-in charge.

R.A.-Glass door

Providing and constructing sandwitch type Granite

stone working platform 0.6 mt. wide & 0.75 mt.

height, including one end side granite stone

(Double Polish) of 1.25 mt. height & front granite

46 stone patti of 10 cm wide, vertical partitions of half 3.00 3128.00 R,M,

B.M. wall in C.M. 1:4 and 10mm th. plaster in 1:3

with finishing smooth with cement slurry as

required etc. comp as per instruction given by site

in charge at all floors. (Basic rate of Granite

(SOR SMC 2024-25, Pg No. 11, It No. 123)

Providing and fixing 8mm thick glass of approved

make including toughening, edge diamond

polishing, making necessary holes in glass,

47 supporting system of good quality SS accessories 7.00 2825.98 S.M.

of Ozone make ("D" clamp fittings) and joints to be

filled where necessary by clear structural silicon

sealant as specified by Engineer in Charge.

R.A-Glass partition for Ticket counter

Fire extinguisher - CO2 Gas type 4.5 kg. Supply,

installation and testing of CO2 Gas fire extinguisher

with necessary hardware and consumables. Standard -

Confirming to IS:15683-2006 with ISI mark. UOM - Price

per each No. Make - Kanex / Safex / Secure Zone

(SOR SMC 2024-25, Pg No. 12, It No. 136)

Description Qty. Rate Unit Amount

Fire extinguisher - ABC powder type 6 Kg. Supply,

installation and testing of ABC powder fire extinguisher

necessary hardware and consumables. Stored pressure

49 mechanism. Charged with MAP-50% (ABC) Dry powder. 2.00 2000.00 Each

with wall mounting clamp. UOM - Price per each No.

Make - Kanex / Safex / Secure Zone

(SOR SMC 2024-25, Pg No. 12, It No. 135)

Providing and fixing 3-sitter S.S. Bench made of 32mm x

5mm thik S.S. Flat (SS 304 Grade) with top seatting

arrangement made of Polished Indian teak wood

Sleeper of section size 200 mm x 25mm(W x H),and

fixing the bench at the specified location as per detail

drawing and instruction of architect or Engineer-in

Rate Analysis Bench-3 Seater 3.00 9330.00 No.

Providing and fixing of cement ceiling using 10 mm

cement sheet of brand T.P.I,SHERA (single sides), etc.

using aluminium framing of 25mm x 50mm x 1 mm in

600 x 600 mm grid,and same pipe for vertical framing,

including all hardware item, aluminium L clits, 25 mm

powder coated self drilling screws,groove (if shown)

51 with all material, 75 mm anchor fastners,making of

coves for indirect lighting, grooves,cutting

,labour,SCAFFOLDING, lead and wastage etc. complete.

And Finished with satin finish wall color and complete

the work satisfactorily as per instruction of architect or

Engineer-in charge.

R.A-Cement sheet ceiling 105.00 2356.00 SM

Steel work welded in built up sections, framed

work including cutting, hoisting, fixing in position

and applying a priming coat of red lead paint (A) in

52 beams & joists channels angles, tees, flats with

connection plates or angle cleats as in main &

cross beams,hip & trussed purlins connected to

common raffers & the like

(SOR SMC 24-25, Pg No. 9 It No. 98-A) 23.00 9108.48 Qtl.

Providing and fixing 12mm dia Fasternar bolts using

53 HILTI chemical system incluing all material, labour,

equipment required.

Description Qty. Rate Unit Amount

Providing and erecting on site 6mm thick colour acrylic

sheet with 3M make Defuser film of UV resistant type

with graphic profile cut in colour acrylic. The entire

surface shall be water proof and air tight with necessary

gaskets. The corners shall be properly made. The acrylic

54 to acrylic joints at the corners shall be evenly

chamfered before sticking. The item includes necessary

hardware to fix the acrylic signage to the MS structure.

Do as specified by Engineer in Charge.

SMC APPROVED RATE (Public Transport Mobility

Comm. Res.No. 04/2024 Dt. 08/02/24

Providing and fixing in position 10mm thick acrylic

sheet UV resistant as per designs on ETM counters for

signages. The acrylic sheet shall be firmly screwed to

the M.S. members so as to withstand wind speeds upto

47m/s. The joints of the sheets shall be well

champhered and jointed using silicone sealants of Dow

corning. The rates shall be inclusive of all kinds of

scaffolding, staging, tools, tackles, hardware and

adhesives. The work shall be done to the complete

satisfaction of the Engineer in charge.the complete

satisfaction of the Engineer in charge.

SMC APPROVED RATE (Public Transport Mobility

Comm. Res.No. 04/2024 Dt. 08/02/24

Providing and fixing in position 8mm thick acrylic sheet

UV resistant as per designs on ETM counters for

signages. The acrylic sheet shall be firmly screwed to

the M.S. members so as to withstand wind speeds upto

47m/s. The joints of the sheets shall be well

56 champhered and jointed using silicone sealants of Dow

corning. The rates shall be inclusive of all kinds of

scaffolding, staging, tools, tackles, hardware and

adhesives. The work shall be done to the complete

satisfaction of the Engineer in charge.

SMC APPROVED RATE (Public Transport Mobility

Comm. Res.No. 04/2024 Dt. 08/02/24

Description Qty. Rate Unit Amount

Providing and installing in position HDPE synthetic

Fiber carry rollers of 100mm dia as instructed by

Engineer in Charge. The rollers shall have seals

which are with labyrinth seal components, non-

rubbing polymer seal and attached with dust and

water deflectors. The rollers shall be such that they

shall have good rolling during impact and shall not

57 damage the body of the bus nor shall get damaged

during impact and shall act as a protecting

mechanism for the bus and the surface of the bus

shelter. The installation of the rollers shall be as

per the instructions of the manufacturers. Samples

shall be approved prior to installation. Roller shafts

shall be made of stainless steel and multi labyrinth

seals shall be filled with high grade lubricants.

SMC APPROVED RATE (Std Com. Res.No.

Providing & Laying Cement concrete guardstone in

proportion 1:2:4 (1 Cement : 2 Coarse sand : 4 Graded

stone aggregate 20 mm nominal size) & shape as per

58 the drawing including necessary excavation steel form

work & white washing etc. complete (cement and steel

contractor own supply.) 750 MM X 350 MM X 400 MM

(M.R.) Approved in S.W (Athwa zone) 100.00 656.00 No.

Providing & fixing interlocking type Cement

Concrete paver block of approved shape & design

having 60 mm thickness (M-40) purchased from

SMC's approved paverblock manufacturer only on

59 fine sand bedding. Item includes leveling by using 0.00 553.00 S.M.

vibratory plates compacted machine. Item also

includes all materials, Labour, euipments, tools,

plants, watering, cleaning etc. complete.

For Road Junction 80 mm thick ( M-50) 18.00 714.00 S.M.

SMC SOR 24-25, GROUND DEVELOPMENT WORK

Preparation of subgrade with Compacting,

Levelling and consolidation of subgrade with

miniroller /plate vibrator machine including

watering and filling in depressions which occur

during the process as directed by engineer in

SMC SOR, GROUND DEVELOPMENT WORK

Description Qty. Rate Unit Amount

Providing & laying Granular sub base

(GSB)confirming to Grading-V of Table 400.0 of

compacted thick of 150mm with specified graded

stone metal and sand mixed in place and laid with

61 mechanical means spreading with motor grader 41.00 1,469.00 C.M.

and compacting with vibratory roller having

minimum 80-100 KN static weight to acheve

desired density of 98% of MDD including all

material, labour, machinery with all leads and lift

SMC SOR, GROUND DEVELOPMENT WORK

Providing and laying 200 micron plastic sheet on

prepared sub base For V.D.S Concrete

SMC SOR, GROUND DEVELOPMENT WORK

Providing & laying cement concrete Pavement

using 1:1.5:3 (1 cement:1.5 sand:3 graded stone

63 agg. 20 mm nominal size) & Vaccuum Dewatering 41.00 5981.00 C.M.

technique including floating surface with a skim

powder floater, curing etc. complete.

SMC SOR 24-25, GROUND DEVELOPMENT WORK

Cutting of Groove 5 to 7 mm thick in VDS for depth

64 1/3 of total thickness with filling of epoxy sealent 45.00 50.00 R.M.

as directed by engineer in charge

SMC SOR 24-25, GROUND DEVELOPMENT WORK

Providing 100mm thick readymade C.C. kerb of

strength M-20 (size 300mm x 380mm) purchased

from SMC's approved paverblock manufacturer &

setting in line, level and in truly vertical position,

65 including filling joints in C.M. 1:1 (1 part of cement 10.00 228.0 R.M.

: 1 part of stone dust) smooth pointing in C.M. 1:1

(1 part of cement : 1 part of coarse sand) including

watering etc. complete and as directed by

engineer in charge.

SMC SOR 24-25, GROUND DEVELOPMENT WORK

Providing and fixing Eco Solvent Vinyl Sticker (120

gsm) with Lamination (100 gsm)

(SOR SMC 2024-25, Pg No. 13, It No. 147)

TOTAL COST ABOVE PLINTH-(B)

Part-B Electrical Work R&B SOR 2025-26

Description Qty. Rate Unit Amount

Part-01 Internal Wiring & Light Fixture

Point wiring for Light / Bell with 2-1.5 sq.mm &

earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires up to 10 mtr length , in below

type of pipe erected with 6A Modular type switch /

bell push & accessories and earth continuity of

following type, erected on PVC / Metallic/Wooden

67 box, single mounting base frame covered with 20.00 485.81 Pt.

textured/metallic/white front plate modules erected

on / in wall / ceiling as per pipe erected, with

necessary Lamp holder/ceiling rose /

H.D.Connector as directed. (f) with medium class

Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete Cat. III

68 Primary light point controlled by one SP MCB 5.00 585.80 Nos

Secondary light point controlled by same switch /

Point wiring for Tissino / Modular secondary light

point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multi strand copper wires, in below

type of pipe to be erected complete with earth

continuity and necessary connection with primary

light with accessories erected on Metal / PVC /

70 wooden box covered with 3 mm thick 10.00 167.66 Pt.

PC(Polycarbonate) / Acrylic sheet for open /

concealed wiring. with necessary Lamp holder /

ceiling rose / H.D.Connector as directed. (f) with

medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete

Point wiring for FAN with 2-1.5 sq.mm & earth wire

of 1.5 sq.mm (Green) both are of .ISI marked

KV Grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length, in below type of

pipe erected with 6A Modular type switch and

hum free EME step type electronic fan regulator

mounted and accessories with earth continuity of

following type erected on PVC / Metallic/Wooden

71 box, single mounting base frame covered with 1.00 674.68 Pt.

textured/metallic/white front plate modules erected

on / in wall / ceiling as per pipe erected. with

necessary ceiling rose / H.D.Connector as

directed. (f) with medium class Rigid PVC pipe

and accessories erected concealed in

wall/ceiling complete Cat. III

Description Qty. Rate Unit Amount

Point wiring for Individual Plug with & earth wire of

1.5 sq.mm (Green) both are of ISI marked 1.1 KV

grade FRLS PVC insulated multi strand copper

wires up to 10 mtr length, in below type of pipe

erected complete with Modular type switch & 5 pin

Plug erected on PVC / Metallic/Wooden box

covered with appropriate front plate modules

72 erected on / in wall / ceiling as per pipe erected 8.00 510.05 Pt.

with following type of accessories.[I] For 6A Plug

and 6 a switch with 2-1.5 sq.mm Cu. Wire from

nearby switchboard/mcb db board.(f) with

medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete Cat.

Point wiring for Individual Plug with & earth wire of

1.5 sq.mm (Green) both are of ISI marked 1.1 KV

grade FRLS PVC insulated multi strand copper

wires up to 10 mtr length, in below type of pipe

erected complete with Modular type switch & 5 pin

Plug erected on PVC / Metallic/Wooden box

covered with appropriate front plate modules

73 erected on / in wall / ceiling as per pipe erected 6.00 745.38 Pt.

with following type of accessories.[II] For 16A Plug

and 16 amp switch with 2-2.5 sq.mm Cu. Wire

from mcb db board.(f) with medium class Rigid

PVC pipe and accessories erected concealed in

wall/ceiling complete Cat. III

DO - as 1.1.5 but with4 sq.mm wire for phase &

Neutral & 2.5 sq. mm for Earthing

-Do- as 1.1.6 but With 20 Amp DP switch and

socket at different location

Point wiring for on board Looped Plug with 6A

Modular type switch & 5 pin socket erected on PVC

/ Metallic/Wooden box, single mounting base frame

covered with textured /metallic/white front plate

modules erected on / in wall / ceiling with following

type accessories Cat. III

Wiring for the UPS / Comp. / Raw Power outlet

with 2 nos. of 250 volts single phase and neutral

16 amps switched socket outlet with 4 sq mm x

core FRLS Round flexible copper conductor

volts grade wires of approved make in

concealed or surface mounted Prelaid 25 mm dia

77 medium guage PVC Conduit / Race ways including 2.00 1333.20 Nos

providing and fixing of 2 no.s of 16 amps 5 pin

switch socket outlet of approved quality colour

make & design in 2 mm thick GI box and

earthing of fixtures and the outlet box . (

Maximum 2 nos. of Plugs can be looped in

Description Qty. Rate Unit Amount

Providing following type of Modular Type

Accessories mounted with PVC / metallic/Wooden

box, single mounting base frame covered with

textured / metallic/white front plate , modules

erected with necessary connections as per site

situation directed by Engineer In charge. (4) TV Co-

axial Socket outlet Cat. III

Providing & erecting Switch board for Computer

or electric apparatus consisting of following

modular type accessories mounted with PVC /

Metallic concealed/open box with single mounting

base frame covered with textured/metallic /white

front plate,modules erected with necessary

connections as directed.

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug Cat.III

Supplying & erecting approved make LAN cable of

80 following size in existing pipe as per direction [C] 50.00 76.76 Mtr

Providing and erecting ISI mark Medium class

RIGID PVC PIPES of following size complete to be

erected on/in wall or ceiling erected with necessary

81 PVC fittings & Junction boxes fixed with adhesive 60.00 24.24 Mtr

solution & Clamps with following dia of pipes, in

approved manner as directed.(a)20 mm

Providing and erecting ISI mark Medium class

RIGID PVC PIPES of following size complete to be

erected on/in wall or ceiling erected with necessary

82 PVC fittings & Junction boxes fixed with adhesive 50.00 33.33 Mtr

solution & Clamps with following dia of pipes, in

approved manner as directed.(b) 25 mm

Providing and fixing 350 x 350 x 40 mm deep

mm thick GI sheet junction box including providing

3 mm thick stainless steel cover as per

Supplying, Fabricating, Installtion, Testing &

Commissining of the 2 mm thick CRCA sheet Steel

Powder Coated MS box as per the approved

Design with locking Arrangement

Supplying and laying UPVC cable trunking system

comprising unplasticised polyvinyl, chloride rigid

material with ignition free and flame proof

confirming BS with necessary end caps Internal

and external bend, flat bends, coupler, tee etc..All

necessary accessories and measuring of following

sizes (2) 100 mm x 50 mm trunking

Description Qty. Rate Unit Amount

Supplying and erecting LED street light / Flood light

fittings with High power White LEDs wattage of

Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with

smooth finish powder coated and heat sink

extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass

with company mark/name engraved or embossed

160 to 270 V,Power Factor more than 0.95, THD <

10 %, CCT 3000 K to 5700K,Uniformity ratio

86 >0.45, Luminaire efficacy> 100 lumens/watt . LED 4.00 3345.12 Each

driver efficiency > 85 %.( fittings required LM-79 &

LM-80 certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.) (A)

Street Light (IP-65), Surge protection -4KV

integral and ,Light must have 440VAC line

supply with over-voltage protection. (i) above

36 to 48 watts Cat-lll

Supplying and erecting Street light pole bracket

comprising main B Class GI pipe of 4.2 cm/require

outside dia. complete with suitable B Class G.I.

sleeve tubing of approx. 45cms.length and suitable

for 76.5mm/80mm/require size of pole top having

nuts and bolts for fixing the brackets and having

87 spread of 0.5 mtr. Length with 110 deg.with vertical 4.00 491.87 Each

plane and suitable welded stiffener reducer and

nipple with check nut complete painted with one

coat.of Red oxide / PU base primer and two coats

of Aluminium / PU paint. paint with following nos of

arms. [A] Single Arm bracket 0.5 Mtr

Description Qty. Rate Unit Amount

Supplying and erecting LED indoor fittings with

LEDs of wattage 0.2 Watt to 0.5 Watt assembled

on single MCPCB, with housing used as a heat

sink shall be made of thick sheet Steel conforming

to IS: 513/CRCA/aluminium pressure die cast

powder coated and high U.V. & corrosion

resistance with diffuser housed in aluminium

casted body with company mark/name

160V to 270V,Power Factor more than 0.9, THD <

15 %, CCT 3000 K to 6500K, Luminaire efficacy>

85 lumens/watt , LED driver efficiency > 85 % (

88 fitting required LM-79 & LM-80 Certificates)(NOTE: 26.00 758.51 Ea.

Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges

shown.) (A) Square/ Circular shaped

Surface/Recessed Mount Downlight with

provision for spring loaded mounting clips

complete.IP65 (iv) 22-24 watts, Surge-2 KV Cat-

Supplying and erecting LED indoor fittings with

LEDs of wattage 0.2 Watt to 0.5 Watt assembled

on single MCPCB, with housing used as a heat

sink shall be made of thick sheet Steel conforming

to IS: 513/CRCA/ aluminium die cast powder

coated and high U.V. & corrosion resistance with

diffuser with company mark/name 120 to

V,Power Factor more than 0.9, THD < 10 %, CCT

3000 K to 6500K, Luminaire efficacy>

lumens/watt ,LED efficiency110 lumens/watt LED

89 driver efficiency > 85 % CREE / OSRAM / PHILIPS 2.00 112.11 Each

Lumileds / NICHIA / SEOUL/Bridgelux make LED

used for luminaire. ( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage

capacity between the ranges shown.) (A) LED

Lamps integral type,cool white with PC diffuser

suitable for B22 LAMP holder (b) 5 to 8 watts

Description Qty. Rate Unit Amount

Supplying and erecting LED indoor fittings with

LEDs of wattage 0.2 Watt to 0.5 Watt assembled

on single MCPCB, with housing used as a heat

sink shall be made of thick sheet Steel conforming

to IS: 513/CRCA/aluminium pressure die cast

powder coated and high U.V. & corrosion

resistance with diffuser housed in aluminium

casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD <

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage

capacity between the ranges shown.)

(A) Square/ Circular shaped Surface/Recessed

Mount Downlight with provision for spring loaded

mounting clips complete.IP20

(ii) 11-15 watts, Surge-2 KV

Providing & erecting Approved make Ceiling Fan

with double ball bearing with Condenser 230 volt

91 A.C.50 Hz. 900 mm sweep complete having 3 1.00 1982.63 Ea.

Aluminium blades, canopy erected complete. [

Make shall be approved by Engineer in Charge]

Supplying & erecting fan hook box of 10 mm M.S.

round bar bounded to the RCC bars up to 50mm

length each side and pierced through a 16 Gauge

M.S. box / Heavy Duty PVC box complete erected

concealed in Ceiling with necessary finishing.

Supplying and erecting 19 / 20 mm. nominal bore

Medium Class M.S. Pipe down rod erected duly

painted for fan complete with proper insulation

without leakage and earthing.

Supplying Table fan approved make A.C. 23OV,

c/s. 40 cm. sweep oscillating complete with 3 mtrs.

94 of 3core round flexible wire and 3 pin plug top. [ 2.00 1841.23 Ea

Make shall be approved by Engineer in Charge]

Supplying and erecting approved make Bracket fan

of 230 volt, A.C. 50 Cy/s., 400/450 mm sweep

complete erected on wall or with lead Cores and

connections complete. Cat.II

Subtotal Part-01

Part-02 LT Switchgear, Distribution Boards &

Description Qty. Rate Unit Amount

Providing and erecting Miniature circuit breaker

single pole 6A to 25A suitable to operate on 240 V

96 A.C. system and having breaking capacity 10 KA to 6.00 112.11 Each

be erected in existing box. confirming to IS

8828/1996 with ISI Mark Cat.III

Providing and erecting Sheet Steel powder coated

MCB distribution board - flush / surface mounted

fitted with busbar, neutral link, earth bar and DIN

rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &

without MCB to house appropriate nos. of

97 MCBs.(The DBs should be used of same company 1.00 1152.41 Each

of MCB to be used) suitable for (A) single phase

incoming and horizontal single phase outgoing

(b) sheet steel double door (IP-43) (iii)8 way

Supply, Erecting, testing and commissioning of

only TPN D.B. PPI type with space for FPMCB as

98 incoming and space for DPELMCB and 16 SPMCB 1.00 4190.49 Each

as outgoing per phase (i.e. 3 tier x 13 way flexy

D.B.) of Legrand Make

Supply, Erecting, testing and commissioning of

only TPN D.B. PPI type with space for FP ELMCB

99 as incoming and space for 12 SPMCB as outgoing 1.00 3580.45 Each

per phase (i.e. 2 tier x 13 way flexy D.B.) of

Providing and erecting Sheet Steel powder coated

MCB distribution board - flush / surface mounted

fitted with busbar, neutral link, earth bar and DIN

rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &

without MCB to house appropriate nos. of

100 MCBs.(The DBs should be used of same company 1.00 1152.41 Each

of MCB to be used) suitable for (A) single phase

incoming and horizontal single phase outgoing

(b) sheet steel double door (IP-43) (iv)12 way

providing and erecting Approved make RCCBs

conforming to IS: 12640 and having sensitivity

of 30 mA and Short Circuit withstand capacity

of 10 KA and suitable for operation on single

phase 240 V,50Hz. having characteristic of 2.00 1969.50 Each

quick action & tripping with all advance feature

& do not incorporate any electronic

component. for following Max. rating erected

as directed (i) 25 Amps.DP Cat. III

Providing & erecting 240 V MCB double pole

switch for motor & inductive load (C Curve) having

102 10 KA breaking capacity & confirms to IS : 8828 in 3.00 299.97 Each

existing box having following capacity (A) 6 to

Description Qty. Rate Unit Amount

providing and erecting Miniature circuit breaker

single pole 6A to 25A suitable to operate on 240 V

A.C. system and having breaking capacity 10 KA

to be erected in existing box. confirming to IS

8828/1996 with ISI Mark

Providing & erecting 240 V MCB double pole

switch for motor & inductive load (C Curve)

having 10 KA breaking capacity & confirms to IS :

8828 in existing box having following capacity

105 25 A / 100 mA DP ELMCB 2.00 2323.00 Each

106 32 A / 100 mA DP ELMCB 1.00 2981.52 Each

107 40 A / 100 mA DP ELMCB 1.00 2636.10 Each

Providing & erecting 415 V MCB Four Pole for

Motor & Inductive Load (C Curve) having 10KA

breaking capacity & confirms to IS :8828 in existing

108 box having following capacity 1.00 595.90 Each

(a) 6 to 32 Amp.

Providing & erecting 415 V MCB Four Pole for

Motor & Inductive Load (C Curve) having 10KA

breaking capacity & confirms to IS :8828 in existing

109 box having following capacity 1.00 595.90 Each

(a) 6 to 32 Amp.

Providing & erecting 415 V MCB Four Pole for

Motor & Inductive Load (C Curve) having 10KA

breaking capacity & confirms to IS :8828 in existing

box having following capacity

astronomical Dual Channel Timer equivalent to

Legrand Make D22 Cat. No.

40 Amp DP Dinrail Mouned Contactor Equivalent

to Legrand make Cat. No.

63 Amp FP Dinrail Mouned Contactor Equivalent to

Legrand make Cat. No.

Sheets steel powder coated enclosure suitable for

incorporating One/Two nos. MCB.

Description Qty. Rate Unit Amount

Providing and erecting Sheet Steel powder coated

MCB distribution board - flush / surface mounted

fitted with busbar, neutral link, earth bar and DIN

rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &

without MCB to house appropriate nos. of

115 MCBs.(The DBs should be used of same company 2.00 355.52 Each

of MCB to be used) suitable for

(A) single phase incoming and horizontal single

(a) single door (IP-30)

Subtotal Part-02

Part-03 Cables and Wires

Providing and erecting Mains with 1.1 KV grade

FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be

erected concealed in /flushed on wall/ceiling, with

116 1.5 sq. mm copper conductor FRLS PVC insulated 30.00 82.82 Mtr

stranded wire of green colour for earth continuity of

following size.(A) with medium class Rigid PVC

pipe and accessories.(b) 2 wire 2.5 sq. mm )

Providing and erecting Mains with 1.1 KV grade

FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be

erected in / on wall / ceiling with 2.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of

green colour for earth continuity of following size(A)

with medium class Rigid PVC pipe and

accessories.(a) 2 wire 4 sq. mm

Providing and erecting Mains with 1.1 KV grade

FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be

erected in / on wall / ceiling with 2.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of

green colour for earth continuity of following size(A)

with medium class Rigid PVC pipe and

accessories.(h) 4 wire 6 sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand Copper conductor for

1.1 KV. to be laid on wall with necessary clamps

or in existing trench / pipe at road crossing or floor

of following size of cables. (A) 4 core 10 Sq. mm

Description Qty. Rate Unit Amount

providing and erecting Mains with 1.1 KV grade

FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be

erected in / on wall / ceiling with 2.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of

green colour for earth continuity of following size

(A) with medium class Rigid PVC pipe and

(a) 2 wire 4 sq. mm

Providing and erecting Mains with 1.1 KV grade

FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be

erected concealed in /flushed on wall/ceiling, with

1.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of

(A) With medium class Rigid PVC pipe and

(b) 2 wire 2.5 sq. mm

Providing and erecting Mains with 1.1 KV grade

FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be

erected concealed in /flushed on wall/ceiling, with

122 1.5 sq. mm copper conductor FRLS PVC insulated 50.00 46.46 Mtr

stranded wire of green colour for earth continuity of

(E) in existing pipe

(a) 2 wire 1.5 sq. mm

Providing and erecting Mains with 1.1 KV grade

FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be

erected concealed in /flushed on wall/ceiling, with

123 1.5 sq. mm copper conductor FRLS PVC insulated 50.00 62.62 Mtr

stranded wire of green colour for earth continuity of

(E) in existing pipe

(b) 2 wire 2.5 sq. mm

Supplying & erecting approved make LAN cable of

124 following size in existing pipe as per direction 100.00 47.47 Mtr

Providing and erecting XLPE (IS:7098)(I)-88 ISI

armoured cable multistrand Aluminium conductor

125 for 1.1 KV. to be laid on wall with necessary 100.00 153.52 Mtr

clamps or in existing trench / pipe of following size

of cables (A) 4 core 16 Sq. mm

Providing and, fixing heavy duty flange type brass

cable gland with rubber ring for PVC insulated

126 armoured cable complete with out going tails, 10.00 47.47 Ea

insulating tape etc for following size of cables. (D)

2 to 4 core 16 Sq. mm

Description Qty. Rate Unit Amount

Solder less crimping type Aluminium lugs

conforming to IS suitable for cable of following size

evenly crimped with high pressure tool &

connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved

manner. (C) 16/25 Sq.mm.

Making trench in soft soil of suitable width of 90 cm

deep for laying cable or locating the fault all over

the run and back filling the same and making the

surface as normal ground.

Providing & laying approved make Double walled

corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with

129 necessary connecting accessories of same 120.00 62.62 Mtr

material at required depth in existing trench for

laying of cable. below ground / road surface for

enclosing cable (A)50 mm outer dia

Providing & laying approved make Double walled

corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with

130 necessary connecting accessories of same 50.00 95.95 Mtr

material at required depth in existing trench for

laying of cable. below ground / road surface for

enclosing cable (C))90 mm outer dia

Providing & laying. R.C.C. Hume pipe for cable to

be laid 90 cm. below ground across the road

131 crossing or on floor with necessary material in an 25.00 226.24 Mtr

approved manner and making the ground as per

original. (F) 100 mm dia.

Providing and, fixing heavy duty flange type brass

cable gland with rubber ring for PVC insulated

132 armoured cable complete with out going tails, 2.00 38.38 Each

insulating tape etc for following size of cables. (C)

2 to 4 core 10 Sq. mm

Solder less crimping type Aluminium lugs

conforming to IS suitable for cable of following size

evenly crimped with high pressure tool &

connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved

manner. (B) 10 Sq.mm

Subtotal Part-03

Part-04 Earthing and Automatic sliding Doors &

Providing and erecting HOT deep Galvanized iron

strip wire 8 to 16 SWG.

Description Qty. Rate Unit Amount

Supplying & erecting earth pit of minimum bore

dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-

1987 made of corrosion free hot dipped G.I.Pipes

having Outer pipe dia of 50mm having 80-200

Micron galvanising, Inner pipe dia of 25 mm having

200-250 Micron galvanising, connection terminal

dia of 12mm with constant ohmic value surrounded

by highly conductive compound with high charge

dissipation suitable for following type of

applications with chamber and heavy duty cover.

(A)(approved make OEM has to submit test

certificate including value of earth resistance of

installation duly stamped and signed by agency

and officer Incharge has to ensure the value of

earthing resistane mentioned in test Certificate) &

having back filling compound of

(B) Inner chemical (CCM Compound)- Resistivity:-

0.2 ohm / meter testing as per IEC 62561-2017,

Voltage drop:- < 1 volt at no load & dry form,

Sulphar content:- <2%(C) Back fill Compound :-

Earthing compound should be capable to retain

moisture for long time Necessary test report must

be submitted by Agency. (b)For Electrical

installation up to 11 KV in normal soil.Length of

Pipe : 2.00 mtrs Back filling Compound :1 no. Bag

Providing and erecting required size HOT deep

Galvanised iron strip for earthing of H.T. , OCB/

ACB/ Transformer LT panel board, Motors etc.

using proper clamp.

Providing and erecting Annealed bare Copper wire

For using salt and charcoal / coke as required for

pipe type earthing.

Approval & Liasioning work for Obtaining the

necessary legal permissions from the concern

govrnment authorities, including to prepar drawings

before/after execution for the work etc complete as

139 directed by E.I.C (Certificate For LIFT, Highrise 1.00 1515.00 Job

Permission DG set. Also for Power supply meter

connection) It includes charges of Name Transfer

of Electric Meter of each flat as well as service

Description Qty. Rate Unit Amount

providng and erecting Approved make single

phase electronic energy meter rating 5A/20A/40A

based on ASIC (Application Specific integral

circuit) digital technology with accuracy Class-I,

temper proof, free from effect of external magnetic

field with phase, earth, reverse and impulse

indications, 6 digit electro-mechanical counter

suitable to work on 120 V to 300V, 45 - 55 Hz.,

housed in robust enclosure complete to be erected

as directed with 3 year replacement guarantee.

Providing and fixing 02 units Automatic sliding

Doors (2 leafs) of size as per drawing for items to

be fitted onto the Bus Station excluding any other

RF component.) with Four Door RF Controller with

2 RFID Reader with weatherproof Stainless-Steel

enclosure to be fitted near the bus door with

Emergency Door operations Switche in Ticket

office (inclusive of two-year warranty period) + Four

141 Door RF Controller (inclusive of two-year warranty 1.00 610890.42 Lot

period) + RFID Reader with weatherproof Stainless-

Steel enclosure to be fitted near the bus door

(inclusive of two-year warranty period) +

Emergency Door operations Switche in Ticket

office (inclusive of two-year warranty period) ( SD

unit Per Station .Each Unit comprise two leafs)

S & L only PVC Heavy gauge in concealed manner

142 with GI pulling wire of 25 mm dia with all 50.00 32.32 Mtr

S & L only PVC heavy gauge in concealed manner

143 with GI pulling wire of 32 mm dia with all 50.00 53.53 Mtr

Subtotal Part-04

Total Civil + Electrification work

SIGNATURE OF THE CONTRACTOR WITH SEAL. Executive Engineer

Surat Municipal Corporation