Selection of firms/Agency for Providing and Commissioning of Single sided Backlit fabric frame with Aluminium extrusions Silicon edge graphics Display board under Jal Jeevan Mission(JJM)

Amount

Providing and Installation of Single sided Backlit fabric (170 gsm coated media) frame with Aluminum extrusions Silicon edge graphics display board of Size (4870 mm x 2430 mm x 75/100 mm thick) with 3 mm outdoor ACP sheet at the back fitted with Aluminum Profile Section (without jointer) stitched with Silicon band on UV/Latex printed Backlit fabric with layer printing for outdoor media framed and fabricated with MS Structure 100 mm x 50 mm MS pipe along with 2 Nos. MS Angle 50 x 50 x 5mm of length 4870 mm fitted with 1.2 W/1.5W/2W LED lens outdoor light with 24/12/6 Nos. 12V 300 W (25Amp) and waterproof Power Supply positioned with 25mm X 3 mm MS plate fitted with 4870 mm x 2430 mm, 6 Nos. at the back of the frame, pillared with adequate 4 Nos. base plates 250mm. x 250 mm X 8mm thick fixed with 8inch 12 mm nut bolt 8 Nos. at the bottom with 8mm MS angular support. 2nos pillar Base Foundation structure and RCC size ( 0.30 m X 0.30 m X 0.6 m) of mixing 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size) including necessary excavation.

Capital Infoart Pvt Ltd