CONSTRUCTION OF COMMUNITY HEALTH CENTER BUILDING AT FP -NO 161 TP-NO 121 IN NARODA WARD, NORTH ZONE, AHMEDABAD

Name of Work:- CONSTRUCTION OF COMMUNITY HEALTH CENTER BUILDING AT

F.P.NO :- 161 , T.P.NO :- 121 IN NARODA WARD, NORTH ZONE,

Bill of Quantities

I. No. Qty Items Unit Rate Per Amount

Civil Work Estimate

1 Demolition & Dismantling work

a 40.00 Demolition of RCC work using Hydra 1047.38 Cu.M.

Breacker including stacking of servicable

materials and disposal of unservicable

materials with all lead and lift.Removal Of

Existing Building Foundation and Super

Structure If Any.

b 60.00 Demolition of Brick work and stone masonry 544.95 Cu.M.

including stacking of serviceable materials

and disposal of unserviceable materials with

all lead and lift.(ii) In Cement Mortar.Removal

Of Existing Building Foundation and Super

Structure If Any.

c Dismentaling of sheet roofing including ridges,

Hips, Valleys, Gutters etc. stacking of

serviceable materials and disposal of

unserviceable materials with all lead and lift.

i 10.00 (i) G.I.sheet roofing. 47.25 Sq.mt

ii 5.00 (ii) A.C. sheet roofing. 53.55 sq.mt

d 2000.00 Dismentling steel work including distempering 3.63 Kg.

and stacking the materials with all lead and

e 2.00 Dismentling doors, windows, ventilators etc. 185.85 Each

(wood or steel) shutters including chowkhats

architraves, hold fasts and other attachment

etc. complete and stacking them with in all

lead and lift. (i)Notexceeding 3 Sq.M. in area.

f 250.00 Removing & Scrapping of Old deteriorated 19.38 Sq.M.

Plaster of any thickness from Masonary /

R.C.C. member including stacking of

serviceable material & disposal of un

serviceable from site of work with all lead &

g 50.00 Dismentaling any type tiled of stone floors laid 47.25 Sq.M.

in mortar including stacking of serviceable

materilas and disposal of unserviceable

materials with all lead and lift.

2 Excavation for foundation including sorting

out stacking of useful material & disposing of

excavated stuff upto 50 mt. lead. Loose & Soft

soil.Excexuted With Mechanical Effort

a 2301.00 up to 1.5 mt. depth 115.92 Cu.M.

c 1937.00 3.0 to 5.0 mt. depth 141.11 Cu.M.

d 500.00 Add extra for Disposing off the excavated stuff 17.28 Cu.M.

of above items for lead of (A) 50 m to 100 m

e 100.00 Add extra for Disposing off the excavated stuff 34.56 Cu.M.

of above items for lead of (B) 100 m to 200 m

f Providing and installing cast in situ single

under reamed piles of specified diameter and

length below pile cap, excluding the cost of

Concrete, steel reinforcement but including

the cost of boring with bentonite solution and

the length of the pile to be embedded in pile

cap etc. all complete. (Length of pile for

payment shall be measured upto to the

bottom of pile cap) :

i 200.00 400 mm dia. Piles 638.83 Rmt.

ii 100.00 450 mm dia. Piles 705.03 Rmt.

g Extra over single under ream for providing

additional bulbs in under reamed piles, under

specified diameter excluding the cost of

Concrete, steel reinforcement (only the nos. of

extra bulbs are to be paid).

t 20.00 400 mm dia. Piles 813.05 Each

ii 10.00 450 mm dia. Piles 1103.43 Each

3a 1.00 Provdg. & laying cement concrete 1:5:10 (1 2492.52 Cu.M.

cement : 5 course sand : 10 hand broken

aggregates 40 mm nominal size) and curing

complete, excluding cost of form work in

foundation & Plinth.

3b Provdg. & laying cement concrete 1:3:6 (1

cement : 3 coarse sand : 6 hand broken stone

aggregates 40 mm nominal size) and curing

complete excluding cost of form work in

578.00 (A) Foundation and plinth 2976.00 Cu.M.

3c 227.00 Supplying of graded hand brocken stone size 609.82 Cu.M.

of 90 mm to 127 mm at site (Rubble or Spoul)

3d 986.00 Labour charges for spreading the spouls 90 16.07 Sq.mt.

mm to 127 mm thick layer good earth filling in

voids correcting the grade & camber comp.

with rolling, watering, incl. preparing

thesurface by brushing for removing all loose

or dirts ect.comp.

4 5.00 Provdg. & laying cement concrete 1:4:8 (1 2653.67 Cu.M.

cement : 4 coarse sand : 8 hand broken stone

aggregates 40 mm nominal size) and curing

complete excluding cost of form work in

foundation& plinth.

5 4750.00 Filling available excavated earth (excluding 129.10 Cu.M.

rock) in trenches, plinth, sides of foundations

etc. in layers not exceeding 20 cm. in depth

consolidation each deposited layer by

ramming and watering.

6 Conveyance charges of earth lime, murrum,

building rubbish, manure, garbage, sludge,

excavated rock, fly ash, aggregate of any kind

a 100.00 Conveyance charges 0 km to 1 km 320.20 Cmt

b 100.00 Conveyance charges 0 km to 2 km 347.73 Cmt

c 10500.00 Conveyance charges 0 km to 5 km 408.41 Cmt

d 10500.00 Extra For Lead on Above Item Above 5 km & 9.26 Cmt

e 10500.00 Extra For Lead on Above Item Above 6 km & 9.26 Cmt

f 10500.00 Extra For Lead on Above Item Above 7 km & 9.26 Cmt

g 10500.00 Extra For Lead on Above Item Above 8 km & 9.26 Cmt

h 10500.00 Extra For Lead on Above Item Above 9 km 9.26 Cmt

7a 15.00 Filling in plinth with sand under floors 455.63 Cu.M.

including watering, ramming, consolidating,

compacting and dressing etc. completed.

7b 644.00 Filling in foundation and plinth with murrum or 286.20 Cmt

selected soil in layers of 20 cm. thickness

including watering, ramming and consolidating

8 Brick work using common burnt clay building

bricks having crushing strength not less than

35 kg/Sq. cm. in cement mortar 1:6 (1 cement

: 6 fine sand) conventional brick

a 98.00 (a) in foundation & Plinth 3981.21 Cu.M.

b 353.00 Super structure Upto Floor Two Level 4253.46 Cu.M.

c 848.00 Super structure Above Floor Two Level 4293.55 Cu.M.

9 I.Half brick masonry in common burnt clay

building bricks having crushing strength note

less than 35 Kg/Sq. Cm. in cement mortar 1:4

(1 cement : 4 coarse sand) using conventional

brick in Super structure upto floor Four level

a 715.00 All Floor Level 646.70 Sq.M.

10.1 Providing and laying controlled cement

concrete of M-25 Grade and curing complete,

Excluding the cost of form work, Scaffolding,

cost of reinforcement for reinforced concrete

work For any Height up to any FloorLevel.

a 3.00 Foundations,Raft,Footings,Mass concrete 4238.04 Cu.M.

b1 2.00 RCC Retaining wall at All Floor 4519.88 Cu.M.

c1 4.00 Tie-Beam, Lintel , Beam- Bracket, Stair Case 4496.07 Cu.M.

& Landing, Coping ,Slab, balcony, weather

shed, loft , any cantilever etc All Floor

d1 2.00 Columns,Pillars, posts and struts at All Floor 4593.91 Cu.M.

10.2 Providing and laying controlled cement

concrete of M-20 Grade and curing complete,

Excluding the cost of form work, Scaffolding,

cost of reinforcement for reinforced concrete

work For any Height up to Floor Four Level.

a 4.00 Foundations,Raft,Footings,Mass concrete 3977.88 Cu.M.

b1 148.00 Tie Beam , Lintel , Beam- Bracket , Coping 4460.36 Cu.M.

,landing, Slab, balcony, weather shed, loft

any cantilever etc at All Floor

c1 3.00 Column at All Floor 4558.20 Cu.M.

d1 1.00 Stair Case All Floor 5418.91 Cu.M.

10.3a 383.00 Providing and laying in position Ready Mixed 4853.56 Cu.M.

M250 grade concrete for reinforced cement

conctere work , using cement content as per

approved Design Mix manufactured in fully

automatic batching plant and transported to

site of work in transit mixer for all lead having

continuous agitated mixer, manufactured as

per mix design of specified grade for

reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of

laying with all lead and lift, excluding the cost

of centering shuttering finishing and

reinforcement including cost of admixtures in

recommended proportions as per IS: 9103 to

accelerate/ retard setting of concrete, improve

workability without impairing strength and

durability as per direction of the Engineer - in

charge. Without Fly Ash (Min cement level as

per latest IS 456 shall be maintained)

(Cement level 450 kg )

10.3b 2606.00 Providing and laying in position Ready Mixed 5043.60 Cu.M.

M300 grade concrete for reinforced cement

conctere work , using cement content as per

approved Design Mix manufactured in fully

automatic batching plant and transported to

site of work in transit mixer for all lead having

continuous agitated mixer, manufactured as

per mix design of specified grade for

reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of

laying, excluding the cost of centering

shuttering finishing and reinforcement

including cost of admixtures in recommended

proportions as per IS: 9103 to accelerate/

retard setting of concrete, improve workability

without impairing strength and durability as

per direction of the Engineer - in - charge.

Without Fly Ash (Min cement level as per

latest IS 456 shall be maintained) (Cement

10.4 18.00 Providing and laying in position Ready Mixed 4793.10 Cu.M.

M200 grade concrete for reinforced cement

conctere work , using cement content as per

approved Design Mix manufactured in fully

automatic batching plant and transported to

site of work in transit mixer for all lead having

continuous agitated mixer, manufactured as

per mix design of specified grade for

reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of

laying with all lead and lift, excluding the cost

of centering shuttering finishing and

reinforcement including cost of admixtures in

recommended proportions as per IS: 9103 to

accelerate/ retard setting of concrete, improve

workability without impairing strength and

durability as per direction of the Engineer - in

charge. Without Fly Ash (Min cement level as

per latest IS 456 shall be maintained)

(Cement level 400 kg )

10.5 Drilling suitable holes in reinforced or plain

cement concrete with power driven drill

machine to a minimum depth of 80mm upto

250mm in RCC beams, lintels, columns and

slabs to introduce steel bars for

sunshades/balconies including fixing the steel

bars in position using Hilti Chemical HY200-R

but excluding the cost of reinforcement, all

complete as per direction of Engineer-In-

a 300.00 8 mm Dia in 80 mm Deep & 12 mm Dia 183.52 Each

b 1100.00 10 mm Dia in 100 mm Deep & 14 mm Dia 263.66 Each

c 1100.00 12 mm Dia in 120 mm Deep & 16 mm Dia 343.80 Each

d 180.00 16 mm Dia in 160 mm Deep & 20 mm Dia 608.63 Each

e 60.00 20 mm Dia in 200 mm Deep & 25 mm Dia 1024.44 Each

f 30.00 25 mm Dia in 250 mm Deep & 32 mm Dia 1938.54 Each

11 Providing and laying controlled cement

concrete 1:2:4( 1cement : 2 coarse sand :

Graded stone aggregate 20 mm nominal size

) and curing complete, Excluding the cost of

form work and reinforcement for reinforced

concrete work in:

a 4.00 Foundations, footings, base of columns,grade 3923.53 Cu.M.

slab and mass concrete.

b 1.00 slab, landing shelves, Balconies, lintels, 4012.47 Cu.M.

beams, girders, and cantilever, up to aany

c 1085.00 P/A Trimix with dewatering machine and 54.00 Sqmtr

floater machine on constructed R.C.C. work

incl. cost of machine and labour etc. comp. as

d 450.00 Making 15 mm Groove in R.C.C work on road 30.00 Rmt

and filling it with poly sulfied selant and

finished it good incl. all labour charges etc.

comp. as directed

e 68.00 Providing and laying and fixing 25 mm thick 738.13 Sqmt

expansion joint by hydrocell semi rigid UV

resistance with high performance laminated

closed cell polythene foam joint filler in sheet

foam as directed, etc. complete.

12 Providing form work in ordinary timber

planking so as to give a rough finish including

centering, shuttering, strutting and propping

etc. height of propping and centering below

supporting floor to celling not exceeding 4 M &

removal of the same for in situ reinforced or

plain concrete work in

a 1088.00 (A) Foundation, footings, bases of columns 171.68 Smt

etc. and mass concrete.

b 5119.00 (B) Flat surface such as soffits of slabs, 252.00 Smt

landing and the like

c 1656.00 (C) Vertical surfaces such as walls (any 229.95 Smt

thickness) partitions.

(D) Columns, pillars, posts & struts.

d 3216.00 (1) Square, rectangular, polygonal in plan 297.68 Smt

e 20.00 (2) Circular or curved in plan. 422.10 Smt

f 6400.00 (H) (1) Sides and soffits of beam, haunchings 192.15 Smt

cantilevers, girders, bressumers, Coping and

lintels not exceeding 1 M in depth.

g 10.00 (2) Sides and soffits of beam, haunchings 259.88 Smt

cantilevers, girders, bressumers and lintels

exceeding 1 M in depth.

h 205.00 (L) chullah hoops, weather sheds, chhajas, 155.78 Smt

carbels etc including edges.

i 960.00 (M) Staircase with-sloping or stepped soffits 242.55 Smt

incl. risers & strings excluding landing.

j 1350.00 Extra for additional height of propping and 386.48 Smt

centering where the height of propping and

centering exceeds 4 .O M between supporting

floor to ceiling including temporary brick or

stone pillars for supporting as required.

(i)Height more than 4.0 M.and upto 5.0 M.

13 Providing T.M.T Fe 500D bar reinforcement

for R.C.C. work including bending, binding

and placing in position complete up to any

a 361927.50 All Floor Level 75.46 Kg.

14 80.00 Providing and laying polished Kota stone slab 982.83 Sq.M.

(Polished / River Finish, Green colour )

flooring over 20 mm. (average) thick base of

cement mortar 1:6 (1 cement : 6 coarse sand)

or lime mortar 1:1.5 laid over and joined with

grey cement slurry including rubbing and

polishing complete.25 mm th.

15 169.00 Providing and laying polished Kota stone slab 1176.03 Sq.M.

25 mm. thick in Platform ,Riser of Stair

Skirting, Tread , dado and pillars laid on

mm. thick cement mortar 1:3 (1 cement :

coarse sand) jointed with grey cement slurry

including rubbing and polishing and MAking

groove where it is Required etc. compl

16 5.00 Providing and laying white/Colur glazed tiles 6 908.17 Sq. M.

mm thick in flooring treads of steps and

landing laid on a bed of 12 mm thick cement

mortar 1:3 (1 cement : 3 coarse sand) finished

with flush pointing in white cement.

17 290.00 Providing and layingWhite / Colour glazed 1426.95 Sq. M.

tiles of size 600 mmx300mm x 8 mm /

mmx 450mm x 8 mm in skirting, risers of

steps, Floor and dedo on 10 mm. thick

cement plaster 1:3 (1 cement : 3 coarse sand)

and jointed with white cement slurry.

18 2.00 Providing and laying marble stone slab 2194.63 Sq. M.

flooring over 20 mm. (Average) base of

cement mortar 1:6 (1 cement: 6 coarse sand)

or L.M. 1:1.5 laid and jointed with grey cement

slurry including rubbing and polishing

complete: (A) Marble slab 25 mm. thick.

19a 3925.00 Providing and laying Vitrified tiles 8 to 10 mm 1062.50 Sq. M.

thick , 24'' x 24'' in flooring treads of steps and

landing laid on a bed of 12mm thick cement

mortar 1:3 (1-cement : 3-coarse sand)

finishing with flush pointing in white cement.

19b 4850.00 Providing and laying Vitrified tiles 8 to 10 mm 1130.15 Sq. M.

thick , 24'' x 24'' in skrting risers of steps and

dedo on 10mm thick cement plaster 1:3

(1cement : 3-coarse sand) and jointed with

white cement slurry

19c 285.00 P & L 24" x 24" vitrified 8 mm thick tile flooring 1383.99 Sq.M.

over 20 mm (average) base of cement mortar

1:6 ( 1cement: 6 coarse sand) on new surface

or fixing on existing flooring by adhesive

material including dismentaling of existing

flooring and jointed with color cement slurry

including finised with flush pointing & cleaning

the surface etc. complete for Antiskid

19d 200.00 Providing and Fixing 18 mm thick concrete 3574.35 Sq.M.

base exposed brick cladding including surface

waterproffing, polymer modified tile adhesive

and polymer modifies tile grout ( grey / white)

with neccesary scafolding etc compl. As per

direction of engg. Incharge.

19e 210.00 Providing and Laying Tactile Tile (For Vision 1663.72 Sq.M.

Impaired Persons as per Strandards) of Size

300x300x9.8 mm Having with Water

Absorption less than 0.5% and Confirming to

is:15622 of Approved Make in all Colours and

Shades in for Outdoor floors such as footpath,

Courtyard, Multi models Location etc., laid in

20 mm Thick Base of Cement Mortar 1:4 (

Cement : 4 Course Sand) in all Shapes &

pattern including Grouting the Joints with

White Cement mixed with Matching pigment

etc. Complete as per Direction of Engineer-in-

20 10.00 Providing and laying Ceramics tiles 6 to 8 960.47 Sq. M.

mm thick in flooring, treads of steps, landing

and dedo on 12 mm. thick cement plaster 1:3

(1 cement : 3 coarse sand) and jointed with

white cement slurry.

21 1950.00 Providing & Laying 18 mm thick Mirror polish 2385.71 Sq. M.

granite For flooring , counter , stair -riser

tread , skirting , dedo , Jambs etc. machine

cut or chiselled on bed of cement mortar 1:1

pointing with neat cement slurry incl.

moulding, Making grooves where it is required

etc. comp. as per instruction of engineer in

22a Provdg. 20 mm. thick Finish / Mala cement

plaster in single coat on fair side of brick /

concrete walls for interior plastering upto any

Floor level and finished even and smooth in

i 7374.00 All Floor Level 190.58 Sq.M.

b Provdg. 20 mm. thick Finish / Mala cement

plaster in single coat plastering on ceilings,

Beam side and sofits of stairs upto any Floor

level and finished even and smooth in

i 6189.00 All Floor Level 215.15 Sq.M.

c 1794.00 Providing & fixing 23 cm wide chicken mesh 292.59 Sq.mt

jali with nails & then application of 15 mm

plaster on R.C.C. & masonary joints as per

dir. of engg. In charge.

d 650.00 Providing and mixing water proofing materials 48.77 Per Bag of

in cement mortar in proportion recommended 50 Kg of

by the manufacturer. etc. comp. as per Cement

instruction of engineer in charge.

23a 3470.00 Providing 20 mm th. Double coat Sand face / 297.68 Sq.M.

Mala Cement Plaster on Walls upto any

Height Above Ground level consisting of

mm th. Backing coat of C.M. 1:3 ( 1 cement :

3 Ssand ) & 8 mm th. Finishing coat of C.M.

1:1 ( 1 cement : 1 sand ) ets. Complete.

24a 100.00 White / Color washing with lime on 12.29 Sq.M.

undecorated wall surfaces (two coats) to give

an even shade including thoroughly brooming

the surface to remove all dirt, dust mortar

drops and other foreign matter.

24b 2800.00 Providing & Applying 3 mm thick External Wall 424.92 Sq.M.

Rustic Type Texture as per Design & Make

as Approved by Consultants / Engineer in

Charge. Work Includes All Necessary

Scaffolding Work upto Any Height.

24 c 3470.00 Finishing walls with Acrylic Smooth exterior 174.97 Sq.M.

paint of required shade :New work (Two or

more coat applied @ 1.67 ltr/10 sqm over and

including priming coat of exterior primer

applied @ 2.20 kg/10 sqm)

24d 25.00 P./L. METALIC HERITAGE SURFACE 637.38 Sq.M.

Providing and fixing of HERITAGE textured

homogeneous wall finishing system from

BAKELITE HYLAM LTD or equivalent make

consisting of a two component system of (25

kgs per Pack) made of 92% silica particles

coated with fade resistant pigments, 100%

acrylic polymer bonding agent (5kgs per pack)

with the applied thickness of the coating being

between 0.8mm-1.2mm to be applied on

acured, smooth level plaster without keying,

as per the shades/combinations approved, as

per the manufacturer directions, for usages,

tobe applied by an approved applicator of the

manufacturer, as per the directions /

supervision of the engineers in charge, all

complete. Includes All Necessary Scaffolding

Work upto Any Height.

25a 7500.00 Wall Painting (two coats) with plastic emulsion 78.44 Sq.M.

/ Oil paint of approved brand and manufacture

and of shade required on undecorated wall

surfaces to give an even shade, over and

including a priming coat with alkali resistance

primer of approved brand and manufacture

after thoroughly brushing the surface free

from mortar droppings, and other foreign

matter and also including preparing the

surface even and sand -papered smooth

b 7500.00 Extra over above item for every subsequent 33.39 Sq.mt.

coat of of wall painting with plastic emulsion /

Oil paint of approved brand.

c 7500.00 Applying two coats of Birla (white cement 40.19 Sq.M.

based) or Asian (acrylic lapy-putty) or

equivalent & two coats of primer of approved

brand and manufacture on new wall surface to

give an even shade including thoroughly

brushing the surface free from mortar

dropping and other foreign matter and sand

papered smooth.

26 Providing & Laying & Jointing glazed

stoneware pipes incl. excavation up to

mt.,refilling, trasporting the pipe to work site,

unloading, lowering in trenches, laying and

jointing the pipes in c.m. 1:1 incl. all jointing

materials such as cement, sand, hemp,

bitumen as dire. testing the pipe line to a head

of 1.5 mt. and hydraulic test as dire incl.

watering trenches, spreading , and carting

away of surplus earth within 100 mt.lead as

dire. etc. comp.

a 170.00 23 cm dia. 344.64 Rmt

Providing & Laying & Jointing glazed

stoneware pipes incl. excavation up to

mt.,refilling, trasporting the pipe to work site,

unloading, lowering in trenches, laying and

jointing the pipes in c.m. 1:1 incl. all jointing

materials such as cement, sand, hemp,

bitumen as dire. testing the pipe line to a head

of 1.5 mt. and hydraulic test as dire incl.

watering trenches, spreading , and carting

away of surplus earth within 100 mt.lead as

dire. etc. comp.

b 35.00 15 cm dia 211.05 Rmt

c 25.00 10 cm dia. 288.23 Rmt

27 20.00 Constructing brick masonry chamber for 3863.85 No.

under ground C.I. Inspection chamber and

bends with bricks having croshing strength not

less than 35 Kg. Cm2 in C.M. 1:5 C.I. cover

with frame (Lightduty) 455mm x 610 mm

intenal dimensions total weight of cover with

frame to be not less than 38 Kg. (Wt. of cover

23Kg.) and Wt. of frame 15Kg.) (R.C.C.top

slab with 1:2:4 mix (1-cement:2-coarse

sand:4-graded stone aggregate 20mm size)

foundation concrete 1:5:10 inside plaster

mm thick with cement mortar 1:3 finished

smooth with a floating coat of neat cement on

walls and bed concrete etc. complete.(i)

Inside dimensions 455 mm x 610 mm and up

28 a 6.00 Constructing Manhole with R.C.C. top slab in 19139.07 No.

1:2:4mix (1-cement: 2-coarse sand:4-graded

stone aggregate 20 mm nominal size)

foundation concrete 1:3:6 mix (1-cement:3-

coarse sand:6-Brick bats 40+50mm size)

inside plastering 15mm thick with Cement

Mortar 1:5 (1-Cement:5-coarse sand) finished

with a floating coat of neat cement and

making channels in cement concrete 1:2:4

mix (1-Cement:2 -Coarse sand:4-stone

aggregate 20 mm nominal size) finished

smooth complete including curing and festing

(i) Inside size 900mm x 1200mm and up to

1.5M. deep including C.I. cover with frame

size 560 mm diameter total weight of cover

and frame to be not less than 128kgs. (Wt. of

cover 64Kg. and Wt. of frame 64Kg.) (A) With

230 mm thick walls of brick masonry using

brick having crushing strength not less than

35Kg./Sq.cm. in Cement Mortar 1:5 (1-

Cement: 5-Coarse sand) (2)B type depth up

29a 24.00 Providing and fixing white vitreous china flat 3344.35 No.

back or wall corner type lipped front urinal

basin of 340x280x470 mm sizes respectively

with standard flush pipe, Waster Pipe, Waste

Coupling, PVc Connection and G.I clamps

complete, including painting of fittings and

brackets, cutting and making good the walls

and floors wherever required : Cera Model

No. S4020103 or Equivalent

b 75.00 Providing and Fixing of C.P. Brass BIB Cock 1564.17 No.

of 15 mm Dia of Jaquar make florentine

series model no. 5047n or equivalent make

with all necessary fittings. as approved by

Engineer - in - charge.,

c 60.00 Providing and fixing brass screw down Angle 1160.57 No.

stop tap.(A) 15mm dia. Of Jaquar make

florentine series modelno. 5053n or equivalent

make with all necessary fittings. as approved

by Engineer - in - charge.,

d 10.00 Providing and fixing C.P. brass shower rose 279.37 No.

with 15mm or 20mm inlet Shower Arm.(A)

100mm dia. Each

e 20.00 Provding and Fixing of autoclosing pressmatic 3280.52 No.

pillar cock / bib cock with all necessary fittings

of Polished Bright Chrome Finish of Jaquar

make model no. 031L65 or equivalent make

as approved by Engineer in Charge. Rate

including of cost of labour, material etc. in

complete manner.

f 40.00 Providing and Fixing of C.P. Brass Two Way 1411.58 No.

Bib Cock of 15 mm Dia of Jaquar make

model no. 041kn or equivalent make

approved make with all necessary fittings. as

approved by Engineer - in - charge.,

g 24.00 Providing and Fixing of C.P. Brass urinal 2568.08 No.

Valve Auto Closing System With Full Built in

Control Cock & Wall Flange of 15 mm Dia of

Jaquar make model no. 077 or equivalent

make approved make with all necessary

fittings. as approved by Engineer - in -

h 35.00 Providing and Fixing of C.P. Brass Pillar Cock 3723.48 No.

Auto Closing System with Elbow Operated

Extended Lever of 15 mm Dia of Jaquar

Make Model No,031 MED or Equvalent

Approved Make & Model with all necessary

fittings. as approved by Engineer - in -

30 25.00 Provdg. & laying S.W. Gully trap with C.I. 1234.57 No.

garting brick masonry chamber & water tight

C.I. cover with frame of 300 mm x 300 mm

size ( inside) with standard weight. sqare

mouth trap size 150 x100 mm P trap

31 2000.00 Providing erecting and fixing double coated 3.91 Litre

ISI water tank of required capacity each with

all necessary fittings and connection etc.

complete on terrace

32 20.00 Extra rate over item of excavation of earth for 71.43 Sq.M.

excavation of asphalt pavement/RCC of

thickness up to 0.20 meter including

demolishing the asphalt carpet, metal, soiling /

cutting Reinforcement etc.comp. with stacking

the material as directed.-up to 0.20 meter

33 65.00 Providing and fixing PVC SWR Nahni trap IS 565.43 No.

14735 for drain - 100 mm diameter with jali of

the following nominal diameter of self

cleansing design with C.I scread down or

hinged grating including the cost of cutting

and making good the walls.

34a Provdg. And fixing Concealed / Open to wall,

ceiling & floor in true line and level UPVC pipe

Schedule- 40 of make as approved by engg.

incharge. pipe shall be fix on wall with the

help of clamp at every twi meter center to

center of shall be concealed as directed in

cluding neccesarry fitting etc. in cluding

testing of pipe and jointd and fixing the same

with adhesive solvent , including cost of all

materials of following nominal bore

iii 15.00 32 mm 117.97 Rmt

34b Providing and fixing concealed center point to

wall ceiling & floor CPVC (SDR 13.5) PIPE

having National Sanitation Foundation (NSF)

seal for potable water of following dia. nominal

bore tube fittings and clamps including making

good the wall, ceiling and floor etc. complete

iii 50.00 25 mm 247.25 Rmt

35 Provdg. And fixing to wall ,ceiling and floor

10.00 kg. F/Sq.Cm2 working pressure

polythelene pipes of the following outside

diameter, low, density, complete with special

flange compression type fittings, wall clips etc.

making good wall ceiling and floor.

b 150.00 (A) 75mm dia 274.68 Rmt

36 10.00 Providing and fixing water closet squatting 1351.15 No.

Pan ( Indian type W.C. Pan) size 580mm

(A)VitreousChina. (I)Long pattern = White

colour with Trap and Pair of Foot Rest

37a 40.00 Providing and fixing white vitreous china 12613.27 No.

extended wall mounting water closet of Cera

Make S1043101 Carat Model Or Equivalent

Model With EWC Soft Close Seat Cover,

Chair Bracket, nuts, bolts and gasket etc

b Providing and fixing chromium plated brass

half trun flush cock of approved quality

including fixing in pipe line etc. complete.

c 40.00 Providing and fixing Health Faucet of Jaquar 1543.36 No.

make model no. 573 oe equivalent make as

approved by engg. In charge with flexible tube

upto 1 metre long etc. complete.

38a 8.00 Providing and fixing 24"x18"x8" Carysil 7960.60 No.

Elegance or Equivalent Make of Single Bowl

Sink S.S. Matt Finish With Waste Coupling,

Waste Pipe,etc. cutting and making good the

walls wherever required.

b 28.00 Providing and fixing Under counter Wash 6641.14 No.

basine including 15 mm C.P. Brass Pillar tap,

32 mm C.P. Brass Waste of Standard make,

Include All Accessaries, Cutting & Making

good the wall / granite Wherever Required in

White Color : Model S2030101 of Cera Clair

Series or Equivalent make Waash basine of

size : 520x450 mm

c 15.00 Providing and fixing Wall Hung wash basin 3825.20 No.

Including 32 mm C.P. brass waste of standard

pattern, Include All Accessaries, cutting and

making good the walls / granite wherever

require:In White Color : Cera Cadal Or

Equivalent Make Wash basin of size 515 x

d 8.00 Providing and Fixing White Vitreous China 5581.19 No.

Laboratory Sink with C.I. Brackets, C.P. Brass

Chain with Rubber Plug, 40 mm C.P. Brass

Waste and 40 mm C.P. Brass Trap with

Necessary C.P. Brass Unions Complete,

Including Painting of Fittings and Brackets,

Cutting and Making Good to Wall / Granite

Wherever Required: Size 600 x 450 x

39a 42.00 Provdg. & fixing 600mm x 450 mm Bevelled 825.48 No.

edge mirror of superior glass mounted of .6

mm th. A.C. sheet or plywood sheet and fixed

to wooden pluge with C.P. brass screws and

40 30.00 Provdg. & fixing C.P..Brass towal rail 597.22 No.

complete with C.P. brass brackets fixed to

wooden plugs with C.P. Brass screws.(600

mmx 20 mm size)

41 Providing and fixing ball valve (brass) of

approved quality, High or low pressure, with

plastic floats complete :

ii 1.00 20 mm dia 1099.94 No.

iii 45.00 25 mm dia 1552.93 No.

iv 23.00 40 mm dia 3312.60 No.

42a Providing and fixing Full Way valve (HEX)

with wheel of approved quality :

i 8.00 15 mm Full Way valve (HEX) 1461.17 No.

ii 1.00 20 mm Full Way valve (HEX) 1924.61 No.

iii 16.00 25 mm Full Way valve (HEX) 2535.55 No.

iv 1.00 32 mm Full Way valve (HEX) 3377.64 No.

v 16.00 40 mm Full Way valve (HEX) 4661.10 No.

vi 6.00 50 mm Full Way valve (HEX) 6675.14 No.

43a 4.00 Providing and Fixing of C.P.Brass Pillar Cock 1725.21 No.

of 15 mm Dia of approved make with all

necessary fittings. as approved by Engineer -

b 12.00 Providing fixing of SS grab bar with all 1937.24 No.

hardwares for Physically Handicap toilet.

44a 900.00 Providing and laying integral cement based 1150.48 Sq.M.

water proofing treatment including preparation

of surface as required for treatment of roofs,

balconies, terraces etc consisting of following

(a) Applying a slurry coat of neat cement

using 2.75 kg/sqm of cement admixed with

water proofing compound conforming to IS.

2645 and approved by Engineer-in-charge

over the RCC slab including adjoining walls

upto 300 mm height including cleaning the

surface before treatment.

(b) Laying brick bats with mortar using broken

bricks/brick bats 25 mm to 115 mm size with

50% of cement mortar 1:5 (1 cement :

coarse sand) admixed with water proofing

compound conforming to IS : 2645 and

approved by Engineer-in-charge over 20 mm

thick layer of cement mortar of mix 1:5 (1

cement :5 coarse sand ) admixed with water

proofing compound conforming to IS :

and approved by Engineer-in-charge to

required slope and treating similarly the

adjoining walls upto 300 mm height including

rounding of junctions of walls and slabs.

(c) After two days of proper curing applying a

second coat of cement slurry using 2.75 kg/

sqm of cement admixed with water proofing

compound conforming to IS : 2645 and

approved by Engineerin- charge.

(d) Finishing the surface with 20 mm thick

jointless cement mortar of mix 1:4 (1 cement

:4 coarse sand) admixed with water proofing

compound conforming to IS : 2645 and

approved by Engineerin- charge

(e) The whole terrace so finished shall be

flooded with water for a minimum period of

two weeks for curing and for final test.“All

above operations to be done in order and as

directed and specified by the Engineer-in-

Charge :and shall be guaranteed for minimum

period of 10 years after handing over the

completed building by the main contractor to

be finished as directed. Stamp paper

guarantee 10 years to be furnished before

receiving any payment from the client.

With average thickness of 120 mm and

minimum thickness at khurra as 65 mm.

b 900.00 Providing and laying broken chine mosaic 739.89 Sq. M.

flooring for terrace using 12 mm to 20 mm

broken pieces of glazed tiles to be laid over

cement mortar 1:3 to plain or slope and to be

tempered to bring mortar creme out upto

surface using white cement including

rounding off junctions and extending them

upto 15 cm along the wall,clearing with water

and oxalic acid etc. as directed.

c 560.00 Providing and applying fibre reinforced 562.40 Sq. M.

elastomeric liquid water proofing membrane

with resilient acrylic polymers having Sun

Reflectivity Index (SRI) of 105 on top of

concrete roof in three coats @10.76 litre/

sqm. One coat of self-priming of elastomeric

waterproofing liquid (dilution with water in the

ratio of 3:1) and two coats of undiluted

elastomeric waterproofing liquid (dry film

thickness of complete application/system not

less than 500 microns). The operation shall be

carried out after scrapping and properly

cleaning the surface to remove loose particles

with wire brushes, complete in all respect as

per the direction of Engineer-in-Charge.

d 88.00 Filling in Sunken Portion with good Quality 4559.61 Cmt

Aerated light weight concrete block having

crushing strength not less than 35 kg/sqcm

and where directed by the Architect /

Engineer-in-charge, in sunk in layer. including

watering, ramming where it is required etc.

complete, as directed by the Architect /

Engineer-in-charge .

45 180.00 Providing and laying cement concrete flooring 348.08 Sq.M.

( I.P.S.) 1:2:4 (1-cement : 2-coarse sand : 4-

graded stone aggregate 20mm nominal size)

laid in one layer and finished with a floating

coat of neat cement. (B) 50mm thick.

46a 12500.00 Providing and fixing M.S. grills/ Gate of 100.17 Kg.

required pattern to wooden/ Granite frames of

windows etc. with M.S. flats at required

spacings and frame alround, square or round

bars with round headed bolts and nuts or by

screws all complete as per the structural

designs and directions of Engineer in charge

b 2500.00 Providing & Fixing Structural steel work ( 126.68 Kg.

Confirming to IS 4923-1997) riveted, bolted or

welded in builtup for all type sections, in

framed work, including cutting, hoisting, fixing

in position and applying a priming coat of

approved steel primer all complete as per the

structural designs and directions of Engineer

c 850.00 Applying priming coat over new steel and 34.34 Sqmt

other metel surface after and including

preparing the surface by throughly cleaning,

oil, grease, dirt and other foreign matter and

scoured with brushes fine steel wood,

scrapers and sand paper with ready mixed

priming paint brushing red lead.

d 850.00 Painting two coats (excluding priming coat) on 86.94 Sqmt

new steel and other metal surface with

enamel paint, brushing, interior to give an

even shade including cleaning the surface an

even shade including cleaning the surface of

all dirt, dust and other foreign matter.

e 180.00 Providing & Fixing 1.2 mm Thick S.S.-304 2270.21 R.Mtr.

Grade 900 mm to 1150 mm High S.S. Railing

having Hand Rail Member of 50 mm Dia.,

No. of Horizontal Pipe of 16 mm Dia. &

Baluster Suppprt of 40 mm Dia. At Every

Third Step as per Detail Given. Rate Includes

All Work Complete as per Description & as

per Direction of Engg. in Charge.

47a 75.00 Providing and fixing in position collapsible 5391.23 Sq. M.

steel shutters with vertical channels 20x10x2

mm braced with flat iron diagonals 20x5 mm

size with top & bottom rails of T-iron 40x40x6

mm with 38 mm dia. Steel pulleys complete

with bolts , nuts , locking arrangement

stoppers , handles including applying a

priming coat of red lead paint.

b 5.00 Providing corrugated 0.80 mm (22 gauge) 719.93 Sq.M.

thick G.I. sheets roofing fixed with galvanized

iron ‘J’ or ‘L’ hook bolts, and nuts 8 mm. dia

with bitumen and G.I. limpet washers filled

with white lead complete excluding the cost of

purlines, rafters and trusses.

c 2.00 Providing valleys 900 mm. overall in plain 1.6 1042.78 Sq.mt.

mm. thick G.I. sheet Class – 3 fixed with ‘J’ or

‘L’ hook bolts and nuts galvanized from ‘J’ or

‘L’ hook bolts and bitumen washers complete.

48a 9.00 Providing and fixing rolling shutters of 3468.72 Sq.M.

approved make made of 80 mm wide M.S.

laths inter-locked together through their entire

length and jointed together at the ends by end

locks mounted on specially designed pipe

shaft with bracket plates, guide channels and

arragements for inside and outside locking

with push-pull operation including the cost of

hood cover and spring etc. complete.(A)

Shutters having width below 3.5 M.

b 12.00 Providing and fixing rolling shutters of 4450.51 Sq.M.

approved make made of 80 mm wide M.S.

laths inter-locked together through their entire

length and jointed together at the ends by end

locks mounted on specially designed pipe

shaft with bracket plates, guide channels and

arragements for inside and outside locking

with push-pull operation including the cost of

hood cover and spring etc. complete. (B)

Shutters having width 3.5 M. and above

49a 239.00 Providing and fixing 27mm domal Series - 1.2 6373.85 Sq. M.

mm Th. Alluminium Section Three track

Sliding window With Metalic Powder Coating

and 4 MM Clear Glaas(Non Tuffen) Include All

Accessaries and Fixture etc. complete as per

the direction of Engineer-in-charge.

b 28.00 Providing and fixing 27mm domal Series - 1.2 4999.10 Sq. M.

mm Th. Alluminium Section Two track Sliding

window With Metalic Powder Coating and

MM Clear Glaas(Non Tuffen) Include All

Accessaries and Fixture etc. complete as per

the direction of Engineer-in-charge.

c 77.00 ALUMINIUM DOOR WORK 5401.70 Sq. M.

Providing and fixing Aluminium Door work

(Single Shutter OR Double Shutter with or

without fix glass) made from Jindal or

equivalent make Powder Coated (50 micron

pure polyester coating ) ,aluminium section

frame built up standard tubular and other

section of approved make confirming to IS

733 and IS 1285 , member size with shutters

of horizontal member , vertical member

Confirming to IS733 and IS 1285 fixed with

rawl plug abd screws or fixing clips or with

expansion hold fasteners including necessary

filling up of gaps at junctions at top bottom

and sides with required PVC/ Neoprene felt,

8/12 mm toughened glass of approved make

etc. Aluminum sections shall be smooth, rust

free, straight.mitred and jointed mechanically

wherever required including Door Hardware

such as cleat angles aluminum snap beading

for glazing /paneling, CP Brass/ Stainless

steel screws, Stoppers, heavy duty floor hing,

S.S. Hinges, aldrop , Locking system, heavy

duty Floor Springs, Pivot and fixtures and

transparent silicon sealant glass fixing to

frame as per details all complete as per

architectural drawings and the direction of

Engineer in Charge. rate incl. all type of

alumnium sections for doors as per the detail

Architectural dwg.

50 a 24.00 Providing and fixing standared extruded of 1163.92 Sq. M.

alluminium section of size 63 mm x 38.10 mm

x 1.2mm (Section:2434, @ Wt.0.643Kg/mt )

with colour anodized alluminium frame for

ventilation with 5 mm thick frosted glass as

details etc complete for Ventilation

50 b 32.00 Providing and fixing standared extruded of 1509.90 Sq. M.

alluminium section of size 63.50 x 38.10 x

1.95 mm ( Section no: 4605, @Wt 1.094 Kg /

Rmt with colour anodized alluminium frame

with 5 mm thick transparent bronze colour

tinted float glass as details etc complete for

50c 54.00 Providing Fixing 1.2 mm thick Alluminium 3124.44 Sq.mtr.

Section Partition -Fully Glazed / Partly

Panelled Partly Glazed / Fully Panelled

Having Size of Section of 2.1/2 x 1.1/2 with

mm Compact Sheet / 5 mm thick Glass Fixing

with 4 mm thick EPDM Rubber etc. Complete

as per Direction of Consultant /

50d 15.00 Providing Fixing 1.2 mm thick Alluminium 4061.77 Sq.mtr.

Section Partition Door -Fully Glazed / Partly

Panelled Partly Glazed / Fully Panelled

frame Having Size of Section of 2 .1/2 x

.1/2 and Door Section Having Size of Tips

Vertical 1 .3/4 x 1 .3/4, Top Rail 4 x 1 .3/4,

Middle Rail 1 .3/4 x 1 .3/4, Bottom rail 4 x

.3/4 with 4 mm Compact Sheet / 5 mm thick

Glass Fixing with 4 mm thick EPDM Rubber

Including Lock, Handle, Door Closer, Door

Stoper, Stopper etc Complete as per Direction

of Consultant / Engg.incharge.

51a 122.00 Providing and fixing Structural Glazing with 3953.75 Sq.mt.

using the 17 Micron anodised of approved

colour alluminium section as transium,

mullium of size 63mm x 38mm x 2 mm with

using 6 mm thick reflective structural glass of

approved make, colour / Tinted, toughned and

shade and fixed with silicone sealant and

spacer tap and at corner sealed neoprene

foam dust and Air sealed gasket mirred

including scaffolding, cleaning of glass

etc.complete at all heights anf lifts with all

necessary fitting and fixtures, anchore

fasteners, necessary M.S. or Aluminium

brackets, suitable design for openable or

sliding window as per Architectural drawing

and as directed by Engineer-in-charge.

Grooves between the glasses to be filled with

sealant of Dow corning - structural sealant

995, weather sealant 789. The entire facade

should be water proof. The mullions are to be

connected to bracket by SS-304 nut bolts.

Measurement shall be given as per actual

execution of the work. (Rate are included

providing & fixing of MS structure steel work

wherever Required)

52a 105.00 Providing and fixing ISI marked 35 mm thick 4332.15 Sq.mt.

flush door shutters conforming to IS :

(Part I) decorative type, core of block board

construction with frame of 1st class hard wood

and well matched teak 3 ply veneering with

vertical grains or cross bands and face

veneers on both faces of shutters with

mm thick Decorative Laminated Sheet on both

faces of shutters including ISI marked

Stainless Steel butt hinges, bright /matt

finished 125 mm Stainless Steel handles of

approved quality & make, ISI marked

oxidised M.S. door latches / Aldrop

Conforming to IS:5930 with necessary screws

etc. complete as per direction of Engg.

b 284.00 Providing wood work in frames of Doors, 602.04 10

windows cleare story windows and Cu.Decim

othersimilar works wrought, framede and fixed

in position. (A) Indian Teak Wood

c 470.00 Providing & Fixing Fluted Glass Partition and 15963.19 Sq.mt.

Door Using 16 x 45 mm Powder Coated

Alluminium Section with 8 mm Thick Fluted

Toughened Glass Including Lock, Handle,

Floor Spring, Connector, Silicon and All Other

Accessaries including Making Pit etc

Complete as per Direction of Consultant /

d 320.00 Providing & Fixing Profile Shutter Using 16 x 14838.39 Sq.mt.

45 mm Powder Coated Alluminium Section

with 5 mm Thick Fluted Toughened Glass,

Concealed Handle Section and Hinges

Including All Accessaries etc Complete as per

Direction of Consultant / Engg.incharge.

e 112.00 Providing and fixing of approved make Clean 10705.16 Sq.mt.

room doors. Doors should be finished in

Powder Coating with thickness of 60 microns

approx. in desired Shades. The manufacturer

company must be ISO 9001-2015 certified.

The door frame is a Single rebate profile of

minimum size 105mm X 57 mm made out of

1.2 mm minimum thick galvanized steel sheet.

The frame is finished with Powder Coating in

desired Shade. Frame having provisions and

necessary Arrangement for receiving

appropriate hardware like lock and hinges.

The door leaf shall be a minimum 46mm thick

fully flush double skin door with vision lite of

DGU Glass of Size 300 x 300 mm x 6 mm .

The door leaf shall be manufactured from

mm thick galvanised steel sheet. Door

Includes SS 304 Hinges, D type Pull Handle-

SS 304, Mortise Deadlock with cylinder -

70mm both side key , Flush type tower bolt,

Door Seal , Door Closer etc. Complete as per

Standard Requirement.

f 20.00 Providing and fixing of approved make 27488.83 Sq.mt.

radiation-proof lead line door with galvanised

steel. Recommended lead door design should

be a sandwich-type panel with both sides GI

Sheet with a minimum 2mm Lead infill. Doors

should be finished in Powder Coating with

thickness of 60 microns approx. in desired

Shades. The manufacturer company must be

ISO 9001-2015 certified. The door frame is a

Single rebate profile of minimum size 105mm

X 57 mm made out of 1.2 mm minimum thick

galvanized steel sheet & with 2mm lead infill.

The frame is finished with Powder Coating in

desired Shade. Frame having provisions and

necessary Arrangement for receiving

appropriate hardware like lock and hinges.

The door leaf shall be a minimum 46mm thick

fully flush double skin door without vision lite.

The door leaf shall be manufactured from

mm thick galvanised steel sheet. Door

Includes SS 304 Hinges, D type Pull Handle-

SS 304, Mortise Deadlock with cylinder -

70mm both side key , Flush type tower bolt,

Door Seal , Door Closer etc. Complete as per

Standard Requirement.

53 Providing and fixing 35 mm th. Shutters for

doors windows & clearstory windows incl.

wood frames as specified 12 cm. x 7cm. size

incl. anodised alluminium fixtures and

fastenings including primer coat of approved

quality and two coats of oil paint etc.

a 3.00 Fully glazed 4788.50 Sq. M.

b 3.00 Fully panelled 5478.89 Sq. M.

c 3.00 Partly panelled and partly glazed 5133.69 Sq. M.

54 75.00 Providing and Fixing FRP FRAME size 125 x 1999.98 Sq.M.

65 mm and 35 mm thick FRP shutter with

wood grain raised pannel design finish shutter

having extra reinforcement on sides and

edges and in polish finish The core of the

shutter is to be filled up with injected fire

extingushing grade.polyurethane foam done

in situ along with embedded wooden pieces

for stiffering and also for tacking hinges and

fixtures. The whole FRP frame and shutter is

to be water proof.weather proof,tennite proof

and resistance to mild acid/ Alkali, Rates are

to be inclusive of S.S. hinges with necessary

screws and brass fixtures and fasening.

55 Making connection to the ex.M.H.in running

sewer incl. Dewatering and other required

machinery etc. of following dia pipes at any

convenient time. All damaged work shall be

well repaired as per instructions.

a 1.00 For Pipe 150 mm to 300 mm diameter 1339.29 No.

b 1.00 For Pipe 400 mm to 600 mm diameter 2232.14 No.

56 2.00 Making connection of galvanised Mild steel 600.08 No.

distribution branch with galvanised mild steel

main 50mm to 80mm nominal bore by

providing and fixing tee including cutting and

threading the pipes complete

57a 3800.00 Providing throating or plaster drip, grooves 41.25 Rmt

and moulding to Wall , R.C.C. chajja and slab.

57b 180.00 Providing & Laying cement vatta 10 cm x 10 23.45 Rmt

cm in size quarter round in c.m. 1:1 (

cement, 1 coarse sand) laid in one layers

finishing with a floating of neat cement

watering etc complete as dire.

58 950.00 Carring out plinth treat ment to post 104.09 Sq.mt

construction/ existing structure by spraying

chemical solution for termite control treatment

including labour and material consist ment

withI.S.I specification. Using Chlordene and

Chiorpur files 20EC. As Per 6131_ paret- II

Consentration Weight one percent is

recommended i.e one litre 20EC chemical

emulsion with19 liter give1% concrentration

inclusive of one litre chemical emulsion

appication at the rate of 5 Litre chemical/ Sqm

of surface is recommended as per I.S

59 10.00 Carring out timber treatment to all wood work 54.98 Smt

including drilling holes and spraying oil based

chemical solution on surface of timber work

for termite control including labour and

material etc. complete. Using Chlordene

20EC. As Per 6113_part III Consentration

Weight 1.00 percent is recommended one litre

chemical emulsion dillute with 9 liter of

kerosene precent concentration. Total dillute

concrentration will be10litre inclusive of the

litre chemical emulsion application 0.75/Litre

chemical per one Sqmt printed two coat wood

60 450.00 Paver Block Providing and laying shot blasted 758.93 Sq.mt.

Non - interlocking, Paver blocks of specified

thickness, size, grade of concrete and colour

machine made and blasting by automatic shot

blasting machine and high density of as per

approved sample of approved make for

footpath, parking areas, service lanes,cross

over and other areas as mentioned in the

drawing. Including providing and laying

mm thick averave bedding layer of coarse

sand below paver block as per required

grading and specification. Laid paver block

shall be mechanically compacted. The work of

the paving blocks shall be executed in line

and level by skilled mason of flooring work

only. Small size of paver block with same

specification shall be used at residue or at

end. It should be laid in such a way that the

no cutting of the paver block to be necessary.

If cutting of paver block shall be required

than cut by machine only and laying to be

done by skilled flooring mason. The finished

surface of the paver block shall have coarse

sand Texture Finish. Pave blocks shall be

compacted and shall be re-laid if necessary.

Actual laid area shall be measured and paid

without any wastage. (A) 80 mm thick M-35

grade Grey Paver block of size 200mm x

200mm. As per approved rate

61 350.00 Providing and fixing pre-cast concrete kerb 358.06 R.mt.

stone of gray cement based concrete block

30cm length,30cm height and 15cm thick of

M250 grade concret as per approved design

and including excavation for fixing in proper

line and level,filling the joint with C:M 1:3

(1cement:3fine sand) etc complete.

62a 40.00 Providing and fixing double action hydraulic 4558.89 No.

floor spring of approved brand and

manufacture conforming to IS : 6315, having

brand logo embossed on the body / plate with

double spring mechanism and door weight

upto 125 kg, for doors, including cost of

cutting floors, embedding in floors as required

and making good the same matching to the

existing floor finishing and cover plates with

brass pivot and single piece M.S. sheet outer

box with slide plate etc. complete as per the

direction of Engineer-in-charge. With stainless

steel cover plate minimum 1.25 mm thickness

b 60.00 Providing and fixing aluminium extruded 1626.10 No.

section body tubular type universal hydraulic

door closer (having brand logo with ISi, IS :

3564, embossed on the body, door weight

upto 36 kg to 80 kg and door width from

mm to 1200 mm), with double speed

adjustment with necessary accessories and

screws etc. complete.

63 180.00 Designing, fabricating, testing, installing and 3061.95 Sq.mt.

fixing in position Curtain Wall with Aluminium

Composite Panel Cladding, with open grooves

for linear as well as curvilinear portions of the

building , for all heights and all levels etc.

(a) Structural analysis & design and

preparation of shop drawings for pressure

equalisation or rain screen principle as

required, proper drainage of water to make it

watertight including checking of all the

structural and functional design.

(b) Providing, fabricating and supplying and

fixing panels of aluminium composite panel

cladding in pan shape in metalic colour of

approved shades made out of 4mm thick

aluminium composite panel material

consisting of 3mm thick FR grade mineral

core sandwiched between two Aluminium

sheets (each 0.5mm thick). The aluminium

composite panel cladding sheet shall be coil

coated, with Kynar 500 based PVDF /

Lumiflon based fluoropolymer resin coating of

approved colour andshade on face # 1 and

polymer (Service) coating on face # 2 as

specified using stainless steel screws, nuts,

bolts, washers, cleats, weather silicone

sealant, backer rods etc.

(c) The fastening brackets of Aluminium alloy

6005 T5 / MS with Hot Dip Galvanised with

serrations and serrated washers to arrest the

wind load movement, fasteners, SS 316 Pins

and anchor bolts of approved make in SS

316, Nylon separators to prevent bi-metallic

contacts all complete required to perform as

per specification and drawing The item

includes cost of all material & labour

component, the cost of all mock ups at site,

cost of all samples of the individual

components for testing in an approved

laboratory, field tests on the assembled

working curtain wall with aluminium composite

panel cladding, cleaning and protection of the

curtain wall with aluminium composite panel

cladding till the handing over of the building

for occupation. Base frame work cost for ACP

cladding is included in this item rate. The

Contractor shall provide curtain wall with

aluminium composite panel cladding, having

all the performance characteristics all

complete , as per the Architectural drawings,

as per item description, as specified, as per

the approved shop drawings and as directed

by the Engineer-in-Charge. However, for the

purpose of payment, only the actual area on

the external face of the curtain wall with

Aluminum Composite Panel Cladding

(including width of groove) shall be measured

in sqm. up to two decimal places.

64 Providing and Fixing Box type metal letters

forming composite box made from 1mm thick

stainless steel plate of grade 304 having

brush finish of following font size to be fixed at

Main Gate in english and or Gujrati and

including fixing charges. etc. complete as per

direction of Engg. incharge. for Payment

Purpose Height of Letter will be measured.

a 2160.00 Upto 300 mm Height 93.85 R. Inch

65a 15.00 Providing and Fixing MURAL made out of 6804.07 Sq.mt.

2mm thick s.s. plate grade 304, including

making necessary design as per Architect

dwg. Through laser cutting including

connection to the R.C.C./Masonary with

necessary frame,anchor fastnuts,M.S.Plate

etc. complete as per direction of Engg.

65b 28000.00 Providing and Fixing Sinage - internal and 9.38 Sq.Inch

external signage boards with Vinyle Text on

ACP sheet / 2 mm th. S.S. Plate etc. complete

as per direction of Engg. incharge.

65c 10.00 Providing and fixing retro Reflective Hi 7535.31 Sq.mtr.

Intensity Micro Prismatic Grade Board using

2mm Aluminum / 4mm ACP, angle iron 75 x

75 x 6mm. Descaling and degreasing the

board as per requirement using epoxy

reflactive process by screen painting as

directed etc. complete including transporting

and fixing in C.C. 1:2:4 with necessary

excavation curing etc. complete as per I.R.C.

67-2012 design. A warranty for 7 years for the

Retro reflective sheeting from original

manufacturer & a certified copy of 3 year

outdoor exposure test report from third party

test lab for the product offered shall be

submitted by contractor. (B)Class B Type-

4(MDR/ODR) retro reflective sheeting

65d 180.00 Road marking with hot applied thermoplastic 364.08 Sqmt

paints with reflectorising glass beads on

bitumin surface providing and laying a hot

applied thermoplastic compound 2.5 mm thick

including reflectorising glass beads @

250gms per sqm area, thickness of 2.5mm is

excluding of surface applied glass beds as per

IRC:35-2015. The finished surface to be level,

uniform and free from streaks and holes.

zebra patta /bump patta lane/center line/ edge

line/cut patta. The white color marking should

provide liminance coefficinet on cemend road

shalll be min 130 mcd/m2/lux and Asphalt

road shall be min 100 mcd/m2/lux during the

service life during the day time. The marking

should meet the performance criteria for night

time reflectivity, wet reflectivity and skid

resistance as mentioned in the section-15 of

IRC 352015. Warranty for the Retro reflectivity

should be two years.

65e 10.00 CAT EYE/Pavement Marker(MNC two nail) 160.71 Nos.

made out of acrylic StreneAcrylonitrile or hi-

impact poly Steren fitted with moulded of

metheacrylate(MNC)reflector cube corner

reflector design,filled with tightly adhering

pooting compound as per ASTMD-788 size

11.5x7x1.60 cms or 10x10x1.75 cms provided

with bituminous adhesive in sufficient quantity

with each unit fixing with two shrank .Reflector

on both side.Co efficient of lumination as per

specification and compressive strenth

tones at 23 degree centigrade etc.B) Double

66a 2610.00 Providing and fixing eco-friendly light weight 1632.63 Sq.mt.

calcium silicate false ceiling tiles having T

egular edge & 15mm Thick Densified edges

on the Tile Periphery for Extra Strength The

Light weight calcium silicate ceiling tiles shall

have, light reflection 85% non-combustible as

per B.S.476 part IV, 100% humidity resistance

and also having thermal conductivity 0.043°

w/m KC. for the best thermal Insulation.

The Light weight calcium Silicate tile shall be

of approved texture Fine fissured/ Spintone/

Cosmos having NRC value of 0.5 & Globe

having NRC value of 0.75 NRC or equivalent

of size 595X595 mm to be laid on true

horizontal level suspended inter locking metal

grid of hot dipped galvanized steel sections

(galvanizing @ 120 grams per sqm including

bothside) consisting of main ‘T’ runner

suitably spaced at joints to get required length

and size of 24X38 mm made from 0.30 mm

thick (minimum) sheet, 1200 mm centre to

centre, and cross ‘T’ of size 24X28 mm made

out of 0.33 mm (Minimum) sheet spaced

mm along spaced between main ‘T’ at

mm centre to centre to form a grid of

1200X600mm and secondary cross ’T’ of

length 600mm and size 24x28mm made of

0.30 mm thick (Minimum) sheet to be

interlocked at middle of the 1200X600mm

panel to form grid of size 600X600mm resting

on periphery walls / partitions on a perimeter

wall angle pre-coated steel of size

(24X24X3000mm made of 0.40mm thick

sheet with the help of rawl plugs at 450mm

centre to centre with 25mm long dry wall

screws @ 230mm interval and laying 15mm

thick Densified edges light weight calcium

silicate ceiling tiles of approved texture (Fine

Fissured/ Cosmos/Spintone) in the grid

including, cutting /making opening for services

like diffusers, grills, light fittings, fixtures,

smoke detectors etc., wherever required,

Main ‘T’ runners to be suspended from ceiling

using G.I. slotted cleats of size 25X35X1.6mm

fixed to ceiling with 12.5mm dia and 50mm

long dash fasteners, 4mm G.I. adjustable rods

with galvanized steel level clips of size

85X30X0.8mm, spaced at 1200mm centre to

centre long main ‘T’ bottom exposed with

24mm of all T-sections shall be pre-painted

with polyester baked paint, for all heights,

, as per specifications, drawings and as

directed by engineer-incharge.Note:- Only

calcium silicate false ceiling area will be

measured from wall to wall. No deduction

shall be made for exposed frames/ opening

(cut outs) having area less than 0.30 sqm.

The calcium silicate ceiling tiles shall have

NRC. Value of 0.50 (Minimum) for Fine

fissured/ Spintone/ Cosmos and 0.75 NRC for

Globe, light reflection 85% noncombustible as

per B.S. 476 part IV, 100% humidity

resistance and also having thermal

conductivity. 0.043° w/m KC.for the best

thermal Insulation

66b 1210.00 Providing and fixing single layer water proof 600.94 Sq.mt.

gypusm board 12.5 mm thick of the make

New good Group Co.Ltd. or equivalent & New

good Group Co.Ltd. company sections using

water proof board of size 1220 mm x

mm x 8.0 mm suspended by G.I suspender of

size 25 mm x 3 mm with intermediate channel

of size 18mm x40mm x0.80mm at 1220 mm

center to center ceiling section of size 40mmx

35mmx 0.55mm at 457 mm center to center

and perimetre chanel A of size 20mm x 27mm

x 30mm x 0.50mm at edges & drops including

paper taps and sofit cleat, anchor fastener,

scoch bolt connecting cleat joining compound

top coat on ceiling including making

necessary opening for light fitting, diffuser etc.

complete as per detail drawing as directed.

67 15.00 Providing and Fixing 6 mm thick Lexan 1427.62 sq.mt.

Polycarbonate multi wall roofing sheet fixed

with hilti screw and rubber silicon sealer and

alluminium strip of size 50 x 3 mm etc

complete as directed by Engineer in charge

68 Manufacturing,testing ,supplying

loading,,transporting to work site,loading

unloading lowering in trenches,laying and

jointing RCC NP3 class pipes in C:M 1:1

including all jointing materials such as

cement,sand,hemp bitumen as directed

testing the pipe line to a head of 1.5 mt and

hydraulic test as directed etc comp.

a 200.00 300 mm Diameter 616.07 Rmt

b 10.00 450 mm Diameter 806.25 Rmt

69 20.00 Constructing Bombay Pattern Type Catch Pit 3125.00 No

of size 0.60 x 0.60 depth up to 1 mt including

excavation, B.B.C.C. (1:5:10), 23 cms thick

brick maso. wall in the prop. of CM (1:6) with

40 mm thick IPS flooring in the prop M15 at

bottom and 15 mm thick cement plaster inside

the catch pit in the proportion of CM (1:3) with

out jali etc. comp. as directed.

70 20.00 CatchPit Jali Fixing P/F FRC catch pit jali with 1383.93 No

frame 600mm x 600mm clear opening etc.

comp.. As directed by engineer in charge.

PERCOLATION WELL

71 120.00 Drilling of pilot bore hole in Alluvial Strata by 694.64 Rmt

direct Rotary Rig of 250 mm.

72 120.00 Reaming 400 mm 212.50 Rmt

73 1.00 Electro Logging charges with carting 16071.43 Job

74 60.00 Providing and Installing 200 mm dia IS:12818 1193.75 Rmt

upvc Casing Pipe "CM" class plain Pipe

75 1.00 Providing and Installing 200 mm dia IS:12818 669.64 Set

upvc End Cap, with Air Vent cowl

76 60.00 200 mm dia Regular with 1.5 mm sloted size 1146.43 Rmt

cage type trapezoidal shape wire wound little

carbon galvanized screen confirming to

77 10.00 Supply of Pea sized Gravel 2029.46 Cmt

78 1.00 Air Vent of 50 mm Bend 401.79 Unit

79 120.00 Lowering and Removing of Dropline up to 147.32 Rmt

80 1.00 Air Compressor 60 CFM/150 PSI 22205.36 Ls

Estimate For Civil Work With Percolation Total Rs.

I. No. Qty Items Unit Rate Per Amount

1.1 1.00 Supply of 400 KVA Outdoor type Compact 1704007.00 SET

Substation consisting of Transformer,HT

switchgear and LT Switchgear and confirming

to IS/IEC 62271-202. a) Transformer:

KVA Copper wound 11kV /433 V DYn11, Dry

Cast resin type Transformer with tapping

range +10 to -10% @ 2.5% ( with tolerance),

class F , with surge restorers, Digital WTI,

IS/IEC 62271-202 as per b) HT Compartment:

11kV, 21kA for 3 Sec . 630 A 50 Hz, gas

insulated VCB in SS tank in sheet enclosure

having provision for one no. direct connection

of Incoming supply cable up to 300sq mm and

one no. VCB( Manually charging & closing) in

series with LBS between VCB and

Transformer, Self Powered Relay 3 O/C +1

E/F Relay type CSPR-V5, mechanical

ON/OFF indicator, trip coil , Manual Close &

Trip PB, live cable indicator, mechanical

interlocks, pad locking facility, SF6 gas

manometer, cable boots, 3 nos. CTs with

Ratio -/1A, Cl: 5P10, 2.5 VA for protection c)

LV side compartment : one no. MCCB of

630A, 36kA, 4Pole, Microprocessor based

release with arrangement for bottom cable

( 100% for phase & 50% for N, Current

density - 1A/ sq mm) The enclosure should be

of IK10 type.The Enclosure shall construction

shall be GI of thickness at least 1.6/2mm.The

enclosure shall be Powder Coated. Each

compartment will be provided with the door

and pad locking arrangement. The

Compartment illumination lamp with door

operated switch shall be provided for each

compartment. The Transformer compartment

will have IP-34 ingress protection, whereas

the HT/LT compartment will have IP-54

protection.The connection between HT and

Transformer shall be by 3 runs of single core

95 sq mm XLPE aluminium cable and

between Transformer to LT switchgear shall

be by appropriate rating Aluminium PVC

1.2 1.00 Supply,installation,testing and commissioning 494665.00 No

of outdoor 11KV, 800A HT Metering cubicle

panel ( HTMC )with VCB as per Technical

specifications No: UGVCL/R&D -

PP/TS/HTMC/001/R1 for outdoor installation.(

CTPT & Meter excluded ).

DIESEL GENERATING SET

1.3 Supply, Installation, Testing and

Commissioning (SITC) of Silent Type Diesel

Generating (DG) Set(s) of prime power rating

(kVA) as specified, complete as a packaged

system, conforming to CPCB IV+ (or better)

emission norms, and complying with all

applicable statutory requirements, codes and

standards including (but not limited to) IS

4722:1968, IS 13364 (Part 2) and BS

(latest editions/amendments). The DG set

shall be suitable for 415 V ±10%, 50 Hz ±5%,

3-phase, 4-wire operation at 0.8 lagging

power factor, 1500 RPM, for tropical

conditions, and shall be capable of delivering

10% overload for one (1) hour after twelve

(12) hours of continuous operation (ISO

8528), unless otherwise stated by the OEM.

The scope shall include complete

accessories, interconnections,

foundations/anti-vibration arrangements,

exhaust system, acoustic enclosure, earthing

(as required), consumables for first

commissioning, and all works necessary to

render the installation fully functional and

compliant, as directed by the Engineer-in-

Factory testing shall be carried out with fuel

and load bank at 0.8 power factor and the DG

set shall be offered for inspection prior to

dispatch. The DG set shall be provided with a

durable QR code/label fixed on the

enclosure/control panel, linking to a document

repository containing (as a minimum)

approved GA drawings, wiring diagrams,

foundation and installation details, OEM

catalogues, operating & maintenance

manuals, factory test reports, type test

certificates (where applicable), warranty

certificate, geo-tag of manufacturing location,

and rating plate data as per relevant

IS/BS/ISO requirements. The OEM/Contractor

shall provide a Remote Monitoring System

(RMS) with minimum one (1) year connectivity

(SIM/data plan/server access as applicable),

including dashboard access, user

ID/password, and data download facility. RMS

shall, at minimum, capture and report: DG

status (Auto/Manual/Off), start/stop events,

kW/kVA/kVAR, V/I/Hz, PF, run hours, fuel

level, battery voltage, alarms/trips with time

stamp, and GPS/location (where supported).

All licences/subscriptions required for the

stated period shall be included in the quoted

(A) DIESEL ENGINE:-

Turbocharged, 4-stroke, water-cooled, multi-

cylinder diesel engine, suitably rated for the

specified DG set prime rating at site

conditions, complete with dynamically

balanced flywheel, heavy-duty engine

mounting, and electric starting arrangement.

The engine governing shall be electronic

(isochronous/droop as per OEM standard)

and shall comply with ISO 8528/BS

requirements for steady-state speed

regulation. Engine shall be complete with dry

type air cleaner with restriction indicator, lube

oil cooler (if required), radiator/cooling

package (as applicable), and all

sensors/switches required for protections and

annunciation. The engine shall be capable of

10% overload for one (1) hour after twelve

(12) hours continuous operation and shall be

suitable for continuous duty under tropical

ambient conditions. The offered engine model

shall be CPCB IV+ compliant and shall be

supplied with complete emission control/after-

treatment system (including DEF/urea dosing

where applicable) along with all accessories,

tanks, pumps, heaters and controls required

for compliant operation. The supply shall

include first fill of lubricating oil, coolant and

consumables required for initial

commissioning and testing. All fasteners,

couplings, guards, hoses and

standard/recommended accessories required

for safe and reliable operation shall be

included and shall be subject to

inspection/approval by the EIC.

(B)Engine-Mounted

Instrumentation/ControlPanel:

Engine-mounted instrument/control panel

shall be microprocessor based, with LCD/LED

display, event log and alarm/trip annunciation,

complete with all wiring, harnesses and

terminations. Indications/protections shall

include (minimum) the following and any

additional protections recommended by the

OEM: (i) Start/Stop key switch and/or push

buttons with emergency stop; (ii) Output

breaker: suitably rated 4-pole

ACB/MCCB/MCB as applicable, with

minimum 25 kA rupturing capacity (or as per

fault level at site, whichever is higher), with

shunt trip where required; (iii) Jacket

water/coolant temperature – indication and

high temperature alarm/trip; (iv) Lube oil

pressure – indication and low pressure

alarm/trip; (v) Lube oil temperature (where

provided) – indication/alarm; (vi) Battery

charging indication, battery voltage indication

and charging failure alarm; (vii) Engine speed

(RPM) indication and overspeed trip; (viii)

Engine running hours meter (non-resettable);

(ix) Fuel level indication and low fuel alarm;

(x) Fail-to-start / crank fail alarm; (xi)

Under/over frequency and under/over voltage

protection (alternator side) as applicable; (xii)

Common alarm and common trip indication

with potential-free contacts for BMS/remote

annunciation. All meters/indications shall be of

proven industrial quality and the panel shall

be wired, ferruled and labelled. The contractor

shall submit wiring diagrams, protection

settings and datasheets for approval prior to

dispatch/installation.

Synchronous, brushless alternator of

appropriate kVA rating, 415 V, 3-phase,

Hz, 1500 RPM, 0.8 lagging PF, continuous

duty, dynamically balanced rotor, self-cooled,

self-excited and AVR regulated. Enclosure

shall be SPDP, minimum IP23. Insulation

shall be Class H with suitable tropicalization;

temperature rise shall be within limits of the

applicable standard. The alternator shall

comply with IS 13364 (Part 2), IS 4722 and/or

BS 2613 (latest), as applicable. Voltage

regulation with AVR shall be within ±1.0%

(steady state) or OEM standard whichever is

better. The alternator shall be capable of 10%

overload for one (1) hour after twelve (12)

hours of continuous operation. Harmonic

distortion shall be suitable for non-linear

loads; alternator shall be equipped with

appropriate AVR features (e.g., soft start,

UFRO) and shall be suitable for motor starting

duties typical to the installation. Terminals

shall be brought out to a terminal box with

adequate space for termination and shall

include earthing terminals. All routine/type test

certificates (as applicable) shall be submitted

for acceptance.

(D) Base Frame & Foundation: Engine and

alternator shall be mounted on a suitably

designed, fabricated MS channel base frame

with stiffeners, lifting arrangement and

coupling guard, duly painted/treated for

corrosion protection. The set shall be installed

on an adequately designed cement concrete

foundation/pedestal with anchor bolts,

pockets, grouting and anti-vibration mounts

(AVMs) / spring isolators as per OEM

recommendations and site conditions.

Vibration levels shall be within OEM

permissible limits. The contractor shall be

responsible for alignment, levelling, tightening

torque and re-check after load trial, complete

in all respects.

(E) Fuel Tank: In-built/base fuel tank

fabricated from minimum 3 mm thick MS

sheet, duly leak-tested, complete with filling

arrangement, vent, and drain, cleaning

opening, level indication and isolation valve.

The capacity shall be adequate for minimum

eight (8) hours continuous operation at full

load. Fuel piping between tank and engine

shall be MS ‘C’ class pipes of suitable

diameter with compatible flexible connections

(where required), complete with all valves,

clamps, supports, unions and fittings. Any

additional safety provisions required by local

fire authority/UGVCL/competent authority

(such as double wall/bunding, flame arrestor,

etc.) shall be provided within the quoted

(F) Exhaust System: Heavy-duty residential

type exhaust silencer suitable for CPCB IV+

installation (with DEF/after-treatment system

wherever applicable) along with exhaust

piping of required length, bends, supports and

flexible bellow, complete with rain cap, drain

arrangement and all accessories. Exhaust

piping shall be thermally insulated/lagged and

cladded where required to ensure personnel

safety and to limit heat radiation inside the DG

room/enclosure. The complete exhaust

arrangement shall be designed such that

engine exhaust back pressure remains within

OEM permissible limits and shall comply with

applicable statutory and safety requirements.

(G)StartingSystem

12 V / 24 V DC electric starting system (as per

OEM design) comprising starter motor(s),

battery charger/alternator charging

arrangement, relays, cabling and terminals,

complete with maintenance-free batteries of

suitable Ah capacity to ensure minimum three

(3) consecutive cranking attempts. System

shall include battery isolator and indication of

charging healthy/failure. All battery

interconnections shall be with crimped lugs,

insulated sleeves and proper supports,

complete in all respects.

(H) Acoustic and Weatherproof Enclosure:

Acoustic enclosure shall be factory-fabricated,

weatherproof and corrosion protected,

suitable for outdoor installation, with minimum

IP65 protection (or better) for the enclosure

body. Enclosure design shall provide

adequate fresh air intake and hot air

discharge for engine radiator and alternator

cooling such that the internal temperature rise

remains within OEM limits at full load.

Provision shall be made for safe

access/maintenance including lockable doors,

viewing window (where provided), emergency

stop access, and cable entry glands. Noise

level of the complete DG set with enclosure

shall not exceed 75 dB (A) measured at 1.0 m

distance in free field conditions, in accordance

with applicable CPCB requirements. The

enclosure shall comply with CPCB IV+ (or

better) requirements and other applicable

local rules/regulations. All louvers, acoustic

infill/insulation, fasteners and sealing

arrangements shall be of fire-

retardant/industrial grade as per OEM

standard. Any deviation from the specified

noise/IP requirements shall be treated as non-

compliance unless explicitly approved by the

EIC in writing.

Erection, testing, commissioning and

satisfactory performance demonstration shall

be carried out as per site requirements and as

directed by the Engineer-in-Charge. The

scope shall include pre-commissioning

checks, insulation resistance tests, no-load

and load trials, safety/protection checks, and

performance test on load bank (where

directed) with submission of test records. The

contractor shall provide initial consumables

including first fill of diesel fuel (minimum up to

80% of fuel tank capacity), lubricating oil,

coolant, etc. required for commissioning and

the specified tests. The bidder/OEM shall

provide comprehensive warranty/guarantee

for the complete DG system (engine,

alternator, control panels, RMS, enclosure

and all accessories) for a minimum period of

two (2) years from the date of

commissioning/handing over, whichever is

later, covering defects in materials and

workmanship. During warranty, all

spares/repairs/replacements and visits

required to maintain the DG set in serviceable

condition shall be carried out at no additional

cost. All necessary statutory approvals,

inspections, testing and certification from the

Electrical Inspector/competent authority

(including provision, testing and sealing of

energy meter(s) wherever applicable) shall be

arranged and obtained by the contractor

within the quoted scope and time, at no extra

cost. Required O&M manuals, as-built

drawings, warranty certificates and training to

operating staff shall be provided prior to

Note: The DG set specifications shall comply

with the latest CPCB guidelines/notifications

and all applicable local rules/regulations

prevailing as on the last date of tender

submission applicable local rules/regulations

prevailing as on the last date of tender

1.00 (R) Continuous rating of 250 KVA ,BHP not 2437870.00 E.a.

less than 309 BHP

Providing & erecting approved make ATS

panel suitable for following size of 3 phase,

415 V., 50 cycles, A.C. diesel generating set

complete of scope as detailed below:

1) Power module: Motorised Changeover

switch with ATS controller, Auxiliary contactor

with NO & NC contacts with Automatic Battery

Charger, indicating lamps for Generator ON,

Mains ON, Load and suitable control terminals

and power terminals with neutral earthing

1.00 (G) ATS Panel for 180 / 250 kVA 3 phase DG 90679.00 Each

1.4 STABILIZER AND UPS

1.4.1 1.00 Supply,installation,testing and commissioning 828600.00 No

of 300kVA 3-Phase servo controlled voltage

stabilizer suitable for 3 Phase unbalanced

Load (100% unbalanced load ) with individual

phase voltage correction ,Three separately

operated dimmer provided for 3 Phase

unbalance loads indoor type having input 3-

Phase 4 Wire,Output 3-Phase 4 Wire, Latest

as per IS 9815 ( PART-1)1994, Input Voltage

Range 380V-480V,Nominal output Voltage

415V ± 1% Output voltage can be changed to

380V/400V,Input Frequency Range 47Hz to

53Hz,Duty cycle 100% continous,Waveform

distortion Nil,Micr controller based True RMS

sensing and correction,Provided suitable RC

Network, Triac based drive for AC step

synchronous motor,Ambient Temp. range 0-

55 Degree celcius, Relative Humidity 95%

non dripping,Under and over voltage cut

offs,425A ,3-Phase OP contactorprovided to

Trip the stabilizer in various Faults,500Amp.of

IPMCCB provided for short Circuit

protection,Single phasing prevention and

Phase reversal Trip, 400A of OP COS

provided for stabilizer Bypass, Transient

suppression,Spike Suppression through

Phoenix SPD,Manual/Auto operation provided

with programmable time delay, 2 Line Digital

Display,Parameter Dislplated: Input and

Output voltage ( Line and Phase ),Neutral -

Earth Voltage,Output

currents,Frequency,Fault annunciation,

Transformer Oil Grade 40kVA confirming to

IS335 Oil capacity 720Litres Approx., Busbars

Terminations provided IP & OP

Cables,Provided CRCA sheet cabinet

fabricatedfree standing floor mounting with oil

cooled Tank is Hot rolled steel on castor

Wheel type dust and vermin proof closed

1.4.2 Supplying and erecting approved make

online Un-interruptible Power Supply system

comprising flat cum-boost charger with IGBT

base rectifier & Inverter & sealed

maintenance free SMF batteries. The charger

having operating capacity for input 160-270V

AC & inverter having output 230V,50 Hz Ac

with 0.8 load power factor with battery,

over/under voltage output with over load &

short circuit protection equipment. The system

housed in CRC sheet duly powder coated

paint with following power backup.with MS

painted batteries stand, 10% Overload

capacity for momentary load.

1.4.2a 1.00 [H} 10 kVA with 1Hr Backup 265597.00 E.a.

1.4.2b 2.00 (J) 20 kVA 3 - phase with 1Hr Backup 393391.00 E.a.

1.5 45.00 Providing and erecting ISI Marked 3core 120 1527.00 Mtr

Sq.mm XLPE insulated 11 KV armoured

cable Aluminium conductor to be laid on wall

with clamps or in provided cable trench / pipe

approved manner as directed.

1.6 2.00 Providing and erecting cable end 7925.00 No

terminatation kit, heat shrinkable Push on type

Densons/ Raychem/ Elastimold make suitable

for 11 KV XLPE cable 3core 95 & 120 Sq.mm

( INDOOR Type )

1.7 2.00 Providing printed instruction chart both in 129.00 No

English and Gujarati and duly framed with

front glasses, for treatment of person suffering

from Electric shock

1.8 1.00 Providing pair of rubber hand gloves suitable 212.00 No

for working on 11 KV/22 KV supply.

1.9 10.00 Supplying rubber matting of following

thickness as per IS:15652/IEC

1.10 2.00 Supplying stand first AID box with antiseptic 297.00 No

cream, medicine for use on wounds due burn,

crepe bandage, gauge bandage, medicated

ready to use bandage (Band-aid) adhesive

tape for medicinal user, Scissors, anti-septic

solution (Savlon or similar) etc. (All above

contents shall be of standard makes)

1.11 3.00 Supplying FIRE bucket round bottom of 9 212.00 No

litres capacity made out of 24 gauge G.I.

sheet with extra handle at bottom duly painted

white inside and Red out side with FIRE

mark, filled with dry-sand and kept on existing

stand provided or hung on wall hook.

1.12 2.00 Supplying and erecting floor mounting stand 933.00 No

for keeping four nos. of FIRE buckets

comprising 1500 mm in length, 900 mm

height frame made out of 30mm X30 mm X

mm angle iron with cross supports for legs,

welded with 4 hooks and duly painted with

one coat of red lead and two coats of

approved enamelled silver paint.

1.13 2.00 Wall hook 22 to 25 cms. projection for keeping 60.00 No

fire buckets made out of 15 mm dia. M.S rod

grouted in wall to a depth of minimum 15 cms.

SUB - TOTAL OF HT WORK

2 INTERNAL WIRING

2.1 Point wiring for Light / Bell with 2-1.5 sq.mm

& earth wire of 1.5 sq.mm (Green) both are of

ISI marked 1.1 KV grade ZHFR/HRFR PVC

insulated multi strand copper wires up to

mtr length , in below type of pipe erected with

6A Modular type switch / bell push &

accessories and earth continuity of following

type, erected on PVC / Metallic/Wooden box,

single mounting base frame covered with

textured/metallic/white front plate modules

erected on / in wall / ceiling as per pipe

erected, with necessary Lamp holder/ceiling

rose / H.D.Connector as directed.

545.00 (f) with medium class Rigid PVC pipe and 605.85 Pt

accessories erected concealed in wall/ceiling

2.2 Point wiring for FAN with 2-1.5 sq.mm &

earth wire of 1.5 sq.mm (Green) both are of

.ISI marked 1.1 KV Grade ZHFR/HRFR PVC

insulated multi strand copper wires up to

mtr length, in below type of pipe erected with

6A Modular type switch and hum free EME

four or more step type electronic fan regulator

with separately mounted and accessories

with earth continuity of following type erected

on PVC / Metallic/Wooden box, single

mounting base frame covered with

textured/metallic/white front plate modules

erected on / in wall / ceiling as per pipe

erected. with necessary ceiling rose /

H.D.Connector as directed.

250.00 (f) with medium class Rigid PVC pipe and 841.05 Pt

accessories erected concealed in wall/ceiling

2.3 Point wiring for secondary light point with 2-

1.5 sq.mm & earth wire of 1.5 sq.mm (green)

both are of ISI marked 1.1 KV grade

ZHFR/HRFR PVC insulated multi strand

copper wires, in below type of pipe to be

erected complete with earth continuity and

necessary connection with primary light with

accessories erected on Metal / PVC /

wooden box covered covered with appropriate

front plate modules erected on / in wall /

ceiling for open / concealed wiring. with

necessary Lamp holder / ceiling rose /

H.D.Connector as directed.as per pipe

erected with following type of accessories.

Note:- Maximum up to 6 mtrs length, excess

will be considered as Mains for Secondary

405.00 (f) with medium class Rigid PVC pipe and 208.95 Pt

accessories erected concealed in wall/ceiling

2.4 Point wiring for Individual Plug with & earth

wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade ZHFR/HRFR PVC

insulated multi strand copper wires up to

mtr length, in below type of pipe erected

complete with Modular type switch & 5 pin

Plug erected on PVC / Metallic/Wooden box

covered with appropriate front plate modules

erected on / in wall / ceiling as per pipe

erected with following type of accessories.

2.4.1 240.00 [I] For 6A Plug and 6 a switch with 2-1.5 636.30 Pt

sq.mm Cu. Wire from nearby

switchboard/mcb db board

(f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling

2.4.2 145.00 [II] For 16A Plug and 16 amp switch with 2- 930.30 Pt

2.5 sq.mm Cu. Wire from mcb db board.

(f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling

2.4.3 45.00 [III] For 16A Plug and 16 amp switch with 2-4 1087.80 Pt

sq.mm Cu. Wire with 2.5 sq.mm ( green)

earthing wire from mcb d b board.

(f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling

2.5 370.00 Point wiring for on board Looped Plug with 6A 306.00 Pt

Modular type switch & 5 pin socket erected on

PVC / Metallic/Wooden box, single mounting

base frame covered with textured /

metallic/white front plate modules erected on

/ in wall / ceiling with following type

2.6 Point wiring for Two Way Controlled Light

Point with 2-1.5 sq.mm & earth wire of

sq.mm (green) both are of .ISI marked 1.1 KV

grade ZHFR/HRFR PVC insulated multi

strand copper wires erected in below type of

pipe with 6A Modular type switches and

following type of accessories erected on PVC

/ Metallic/Wooden box, single mounting base

frame covered with textured / metallic/white

front plate modules erected on / in wall /

ceiling as per pipe erected. with necessary

batten/angle holder or ceiling rose or

H.D.Connector as directed.

18.00 (f) with medium class Rigid PVC pipe and 753.90 Pt

accessories erected concealed in wall/ceiling

2.7 Providing following type of Modular Type

Accessories mounted with PVC /

metallic/Wooden box, single mounting base

frame covered with textured / metallic/white

front plate , modules erected with necessary

connections as per site situation directed by

Engineer In charge.

2.7.2 85.00 (2) One No 5 pin plug 150.00 E.a.

2.7.3 140.00 (7) Blank Plate Single 25.00 E.a.

2.7.4 80.00 (9) 16 Amp. SP one way switch 179.00 E.a.

2.7.5 80.00 (10) 6/16Amp. Universal socket 198.00 E.a.

Modular MCB Switch

Pole Modular MCB Switch

2.8 Providing and erecting ISI mark Medium class

RIGID PVC PIPES of following size complete

to be erected on/in wall or ceiling erected with

necessary PVC fittings & Junction boxes fixed

with adhesive solution & Clamps with

following dia of pipes, in approved manner as

2.9 Providing & erecting PVC Corrugated Flexible

Conduit with required nos. of coupling, PVC

bushes, Check-nuts etc. complete of following

2.10 providing and erecting Mains with ISI marked

electrolyte stranded copper conductor, Non

PVC Zero Halogen free fire retardant

insulated copper conductor, insulated wire

(HRFR) conforms to IS-694, erected in

existing pipe with 1.5sq. mm copper

conductor of same specifications for earth

continuity of following size.

In Existing medium class Rigid PVC pipe and

2.11 providing and erecting Mains with 1.1 KV

grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following

type of pipe to be erected in / on wall / ceiling

with 2.5 sq. mm copper conductor FRLS PVC

insulated stranded wire of green colour for

earth continuity of following size

(A) with medium class Rigid PVC pipe and

(use earth wire of 4 sq.mm )

2.12 providing and erecting Mains with ISI marked,

1.5KV grade electrolyte multi stranded,

annealed copper conductor with heat resistant

PVC insulated conforms to IS 694, IEC -

erected in existing pipe of following size

(Specifically for control panel, relays, power

switchgears, motor starters & control wiring)

with required size of copper lugs, nuts and

bolts if required.

2.12.1 60.00 (d) One wire 4.00 sq. mm 47.00 Mtr

2.12.2 20.00 (e) One wire 6.00 sq. mm 70.00 Mtr

2.12.3 140.00 (f) One wire 10.00 sq. mm 114.00 Mtr

2.12.4 80.00 (g) One wire 16.00 sq. mm 176.00 Mtr

2.12.5 20.00 (h) One wire 25.00 sq. mm 293.00 Mtr

2.12.6 10.00 (k) One wire 70.00 sq. mm 829.00 Mtr

2.13 Supplying and erecting Flexible PVC insulated

multi strand multi core 1.1 kv grade ISI

marked copper wires of following size to be

erected as directed.

2.13.1 130.00 e) 1.50 Sq.mm 3 core round PVC sheathed 58.00 Mtr

2.13.2 90.00 h) 2.50 Sq.mm 3 core round PVC sheathed 97.00 Mtr

2.13.3 55.00 k) 4.00Sq.mm 4 core round PVC sheathed 219.00 Mtr

2.14 Supplying & erecting M.S. Box having

Gauge painted with red oxide or Heavy duty

PVC box erected flushed on wall or concealed

in wall with necessary plastering & finishing as

directed of following size.

2.15 Supplying and laying UPVC cable trunking

system comprising unplasticised polyvinyl,

chloride rigid material with ignition free and

flame proof confirming BS with necessary end

caps Internal and external bend, flat bends,

coupler, tee etc..All necessary accessories

and measuring of following sizes

2.15.1 10.00 (2) 100 mm x 50 mm trunking 424.00 Mtr

2.15.2 10.00 (4)100 mm x 50 mm trunking with TWIN 1309.00 Mtr

compartment With clip in divider

2.16 Supply & installation of surface mounted U

PVC snap-on adaptable trunking raceways,

fabricated out of U-PVC to Off-White or

approved shade as per IS 733 of thickness

2.0mm for the base and sides with all

accessories like removable covers, joints

,height spacer,angles complete with

necessary bends, suitable sized junction

boxes and tees etc, Complete.

10.00 (a)Size: 50x80mm PVC Raceways for Power 1052.00 Mtr

& Data with 2 compartments above

specifications.

2.17 Supply & installation of modular type

accessories for U PVC snap-on adaptable

trunking/Pop up Box with required items

erected with necessary connection. As

desired by Engineer In charge

2.17.1 2.00 i) 6 A SP 1 Way Switch 204.00 No

2.17.2 2.00 ii) 16A SP 1 Way Switch 351.00 No

2.17.3 2.00 iv) 6A universal socket shuttered 347.00 No

2.17.4 2.00 iv) 6/16 A universal socket shuttered 458.00 No

2.18 Supplying & erecting 20 Amp 10 KA ‘C

Curve’ single pole MCB with 20 Amp. Plug

socket, company fabricated powder coated

sheet steel enclosure erected as directed with

8.00 [A] Metal Clad Socket with metal clad top 574.00 E.a.

2.19 1.00 Providing & erecting insulated socket 3P+N+E 2169.00 E.a.

with Plug 32A rating which is comprised of

Four pole MCB slot and insulated socket IP40

SUB - TOTAL OF INTERNAL WIRING

3 Switchgears , Panels , MCBDBs & MCBs

Design, fabrication, assembling, supply,

installation, testing and commissioning of

cubicle type, wall / Floor mounted LT panel

suitable for 415 V 3 phase, 4 wire 50 Hz AC

supply system fabricated in compartmentised

design from CRCA sheet steel of 2 mm thick

for frame work ,Doors and partitions IP 42 and

covers,3 mm thick for gland plates i/c cleaning

and finishing complete 9 tank process in

house facility for powder coating in approved

shade, extendable type FP aluminium alloy

busbars of high condectivity, DMC/SMC

busbar supports, entire panel shall have a

common copper earthbar of size 25mm X

mm / 50 x 6mm al earth bar at the rear with

Nos. earth studs, solid connection from main

busbar to switchgears with require size of

aluminium busbar & control wiring with

sqmm FRLS insulated copper conductor

cable, cable alleys, cable gland plates i/c

accessrories as per specification and

providing switchgears, metering instruments

etc. for following panel.G.A.Drawing to be

approved by EIC or consultant. ( Outgoing

connectors must be nut-bolt type. Outgoing

mains for 63Amp MCBs must be of 4 x

16sqmm cu flexible wires).Incomers Mains for

MCBs shall be always from the busbars.

( a ) Providing cable clamps / supports within

distribution boards cable alley.

( b ) All hinged door shall be earthed through

2.5 sq mm tinned b raided copper wire.

( c ) Pad locking of MCCB’s handles in “OFF”

( d ) All the C.T.s should be auto short link

( e ) All the MCCB's should be with rotary

( f ) All incoming and outgoing air circuit

breakers shall be placed on middle portion of

the vertical in single tier formation.

( g ) Any descripancy found in SLD & Boq , it

should be brought in the notice of the client /

consultant, and the decision will be taken final

by Client / consultant.

3.1 Providing and erecting Approved make Four

pole moulded case circuit breaker having

breaking capacity ICU of 50 K.A. and above

at 415 V having normal current rating up to

630A. with Microprocessor release suitable to

work on A.C.supply 50 c/s. with all internal

connections, spreader tinned copper &

complete erected in existing 16 G.M.S.

housing . Overload release range 158-630A.

confirms to IS/IEC 60947-2.

1.00 ICS=100% of ICU only 41424.75 No

3.2 Providing and erecting Approved make Four

pole moulded case circuit breaker having

breaking capacity ICU of 35 KA. and above at

415 V . having normal current rating 250A.

with variable thermal & magnetic release

suitable to work on A.C.supply 50 c/s. with all

internal connections, spreader tinned copper

& complete erected in existing 16 G.M.S.

1.00 ICS=100% of ICU only 20739.00 No

3.3 Providing and erecting Approved make Four

pole moulded case circuit breaker having

breaking capacity ICU of 35 KA. at 415 V.

having Normal current rating 200A.with

Microprocessor Release suitable to work on

A.C.supply 50 c/s. with all internal

connections, spreader tinned copper &

complete erected in existing

4.00 ICS=100% of ICU only 23850.45 No

3.4 Providing and erecting Approved make Four

pole moulded case circuit breaker having

breaking capacity ICU of 35 KA. at 415 V.

having normal current rating 125A. with Fixed

thermal & magnetic release suitable to work

on A.C.supply 50 c/s. with all internal

connections, spreader tinned copper &

complete erected in existing 16 G.M.S.

13.00 ICS=100% of ICU only 8774.00 No

3.5 Providing and erecting Approved make Four

pole moulded case circuit breaker having

breaking capacity ICU of 25 KA. at

V,having normal current rating up to 25 A to

100A. with Fixed thermal & magnetic release

suitable to work on A.C. supply 50 c/s. with all

internal connections, spreader tinned copper

& complete erected in existing 16 G.M.S.

16.00 ICS=100% of ICU only 6723.00 No

3.6 Providing and erecting Approved make Three

pole moulded case circuit breaker having

breaking capacity/strength ICU of 35 K.A. and

above at 415 V. having Normal current rating

200A.with variable Thermal & magnetic

release suitable to work on A.C.supply 50 c/s.

with all internal connections, spreader tinned

copper & complete erected in existing

G.M.S. housing.

1.00 ICS=100% of ICU only 16963.00 No

3.7 providing and erecting Approved make Earth

fault Relay suitable to mount with inter

connection suitable to following size of

moulded case circuit breaker having CT ratio

& MCCB rating as following along with shunt

trip 220V AC. with all internal connections &

complete erected in existing M.S.housing..

3.8 350.00 Fabricating the box type items made from 179.00 Kg

M.S. Sheet with A.I. supports, wings, doors,

handles other hardware materials as per

requirement design with finishing by three

tank powder coating processed inside and

outside painted, erected as directed including

minor civil work. to install above MCCB.

3.9 30.00 providing and erecting Miniature circuit 295.00 No

breaker single pole 0.5A to 2A system and

having breaking capacity 10 KA to be erected

in existing box. confirming to IS 8828/1996

3.10 20.00 providing and erecting Miniature circuit 122.00 No

breaker single pole 6A to 25A suitable to

operate on 240 V A.C. system and having

breaking capacity 10 KA to be erected in

existing box. confirming to IS 8828/1996 with

3.11 Providing & erecting 240 V MCB double pole

switch for motor & inductive load (C Curve)

having 10 KA breaking capacity & confirms to

IS : 8828 in existing box having following

3.12 Providing & erecting 415 V MCB Four Pole

for Motor & Inductive Load (C Curve) having

10KA breaking capacity & confirms to IS

:8828 in existing box having following capacity

3.13 Providing & erecting 415 V MCB three Pole

for Motor & Inductive Load (C Curve) having

10KA breaking capacity & confirms to IS

:8828 in existing box having following capacity

3.14 Providing and erecting Approved make

RCCBs conforming to IS: 12640 and having

sensitivity of 30 mA and Short Circuit

withstand capacity of 10 KA and suitable for

operation on single phase 240 V,50Hz. having

characteristic of quick action & tripping with all

advance feature & do not incorporate any

electronic component. for following Max.

rating erected as directed

3.00 (ii) 40Amps. DP 2434.00 No

3.15 Providing and erecting Approved make

RCCBs conforming to IS: 12640 and having

sensitivity of 30 mA and Short Circuit

withstand capacity of 10 KA and suitable for

operation on 3 phase and neutral 415V,50Hz.

having characteristic of quick action & tripping

with all advance feature & do not incorporate

any electronic component for following Max.

rating erected as directed.

3.16 Providing and erecting following additional

parts for panel mounting MCCBs

3.16.1 35.00 (A)Extended operating rotary handle with pad 952.00 No

lock with three position trip,off,on suitable for

25A to 250 A panel mounting cat-III

3.16.2 2.00 (B)Extended operating rotary handle with pad 1428.00 No

lock with three position trip,off,on suitable for

400A to 630 A panel mounting cat-III

3.17 8.00 Supplying and erecting approved make panel 1263.00 No

mounting type Digital Voltmeter having

digits LED display, 0 to 750 AC Volts range

erected on existing panel board with all

connection, wiring etc .with manufacturers

calibration certificate.

3.18 8.00 Supplying and erecting approved make panel 1543.00 No

mounting type Digital Ammeter having

digits LED display, external CT operated,

calibrated for 0 to 1000 Amps suitable to

operate on 500 Volt AC , erected on existing

panel board with all connection, wiring etc

.with manufacturers calibration certificate.

3.19 16.00 Supplying and erecting Ammeter / Voltmeter 314.00 No

selector switch for 3 phase AC Supply 500 V

on existing panel board with necessary

3.20 45.00 Providing & erecting L.T. Current 272.00 No

Transformer with bar primary 50/5 to 1000/5

ratio 15 VA burden erected in existing CRCA

box duly secured with insulating materials

connected to the meter

3.21 2.00 Supplying & erecting approved make Power 5052.00 No

Factor Meter 150mm dia flush/projection type/

balanced & unbalanced load to work with

appropriately provided CT’s 100/5A to 400/5A

ratio & other accessories complete erected in

M.S. box & connected to the circuit by means

of PVC copper Core leads.

3.22 60.00 Supplying and erecting approved make 43.00 No

suitable panel indicator LED type lamp, lens

cover, complete erected with necessary

3.23 8.00 Providing and erecting metallic vitrified danger 69.00 No

notice board as per language suggested by

engineer incharge for MEDIUM VOLTAGE

installation to be erected as per IS-2551.

3.24 25.00 Providing and erecting required size 223.00 KG

Aluminium strip for earthing of H.T. , OCB /

ACB / Transformer, LT panel board, Motors

etc. using copper clamp.

3.25 10.00 Providing and erecting required size Copper 787.00 Kg

strip for earthing of H.T. OCB / ACB/

Transformer, LT panel board, Motors etc.

using copper clamp.

3.26 5.00 providng and erecting Approved make energy 2179.00 No

meter 3 phase 4 wire unbalanced load 500 V.

5 to 10A complete erected as directed with

necessary earth wire.Class-1

3.27 450.00 Providing , erecting , fabricating the M.S. 77.00 Kg

structure as per requirement on site

incorporating proper size of M.S.

angles,square,round, flats, bars, channels,

sections complete with cutting, welding,

grinding & finishing duly painted with one coat

of red oxide with erection on site as per

direction of engineer in charge with necessary

grouting, cementing, plastering & finishing

3.28 Supplying and erecting triple pole & neutral

440V/ 500V panel mounting Aluminium

Busbars with four equal Nos. of bus having

current density not more than 0.8 Amp. /

sq.mm (Rated current / cross section area)

duly wrapped with colour insulating tape for

phase sequence of following current carrying

capacity, erected with necessary bus bar

supports /insulators, main cable socket to

each busbar,erected in existing cubical panel

with necessary connections.

3.28.1 28.00 (A) Suitable for 100 Amp. Capacity 654.00 RnMtr

3.28.2 16.00 (B) Suitable for 200 Amp. Capacity 1027.00 RnMtr

3.28.3 1.00 (C) Suitable for 300 Amp. Capacity 1455.00 RnMtr

3.28.4 18.00 (E) Suitable for 630 Amp. capacity 3031.00 RnMtr

3.28.5 1.00 (F) Suitable for 800 Amp. capacity 6179.00 RnMtr

3.29 Supplying and erecting triple pole & neutral

440V / 500V panel mounting Copper Busbars

with four equal Nos. of electrolyte bus having

current density not more than 1.6 Amp. /

sq.mm (Rated current / cross section area)

duly wrapped with colour insulating tape for

phase sequence of following current carrying

capacity, erected with necessary bus bar

supports /insulators, main cable socket to

each bar, erected in existing cubical panel

with necessary connections.

12.00 (A) Suitable for 100 Amp. Capacity 1942.00 RnMtr

3.30 Providing & erecting weather proof, dust &

vermin proof, floor mounted front operated

indoor type cubical panel board necessary

IP-42 and above protection as per approval

from engineer incharge made from 14 SWG

thick CRC M.S. sheet for outer body & doors,

16 SWG thick CRC M.S.sheet for internal

partitions with necessary accesories

supporting angles/ flats channel including

cutting, bending, drilling, welding, riveting with

internal partitions & cable alley as per

requirements & instruction of engineer-in-

charge with erection of

supplied switch gears, BUSBARS, suitable

size of inter connecting PVC copper wire /

copper-aluminium strips, rubber grommets,

rib, bakelite control fuses/MCB for measuring

instruments, earth bus & earth bolts,

foundation flange - bolts-base Plates,

sufficient nos. of hinged doors, handles with

locking arrangement and rubber gasket,heavy

duty end terminal connection,danger notice

board,necessary ventilation,earthing strip

complete. The Panel shall be painted with

epoxy powder coating.

(The rates excludes the cost of switchgears,

bus bars, inter connecting mains & Copper

Aluminium strips, meters, Fuses etc. The

dimension shall be measured excluding base

beams) The panel shall be supplied with

following approved manufacturers with

following size.

(B) The standard companies switch gear shall

be used and only manufacturers at CPRI

approved factory

18.00 (i) with 350mm depth 14755.00 Sqmtr

3.31 Providing & erecting weather proof, dust &

vermin proof, floor mounted front operated

outdoor type double door cubical panel board

necessary IP-54 and above protection as per

approval from engineer incharge made from

14 SWG thick CRC M.S. sheet for outer body

& doors, 16 SWG thick CRC M.S.sheet for

internal partitions with necessary accesories

supporting angles/ flats channel including

cutting, bending, drilling, welding, riveting with

internal partitions & cable alley as per

requirements & instruction of engineer-in-

charge with erection of

supplied switch gears, BUSBARS, suitable

size of inter connecting PVC copper wire /

copper-aluminium strips, rubber grommets,

rib, bakelite control fuses/MCB for measuring

instruments, earth bus & earth bolts,

foundation flange - bolts-base Plates,

sufficient nos. of hinged doors, handles with

locking arrangement and rubber gasket,heavy

duty end terminal connection,danger notice

board,necessary ventilation,earthing strip

complete. The Panel shall be painted with

epoxy powder coating.

(The rates excludes the cost of switchgears,

bus bars, inter connecting mains & Copper

Aluminium strips, meters, Fuses etc. The

dimension shall be measured excluding base

beams) The panel shall be supplied with

following approved manufacturers with

following size.

(B) The standard companies switch gear shall

be used and only manufacturers at CPRI

approved factory

1.00 (i) with 350mm depth 16162.00 Sqmtr

3.32 Supplying & erecting XLPE(IS:7098)(I)-88 ISI

unarmoured copper cable 1.1 KV grade to be

erected as directed of following size.

3.33 providing and erecting Mains with ISI marked,

1.5KV grade electrolyte multi stranded,

annealed copper conductor with heat resistant

PVC insulated conforms to IS 694, IEC -

erected in existing pipe of following size

(Specifically for control panel, relays, power

switchgears, motor starters & control wiring)

with required size of copper lugs, nuts and

bolts if required.

3.33.1 270.00 (a) One wire 1.00 sq. mm 16.00 Mtr

3.33.2 310.00 (b) One wire 1.50 sq. mm 22.00 Mtr

3.33.3 225.00 (c) One wire 2.50 sq. mm 34.00 Mtr

3.34 Design, Supplying, installing, testing of factory

fabricated ready made Three phase APFC

Panel Cubical Panel fabrication should be

type tested as per IEC 61921, 61439:1&2

Capacitor Duty Contactor for switching as per

following Steps Incomer Switch of MCCB type

Icu=Ics=50KA at 400/440 Volts, with OC, SC,

internal earth fault protection Incomer Switch

of MCCB type Icu=Ics=50KA at 400/440 Volts,

with OC, SC, internal earth fault

protection,Copper tinned insulated

Busbar,Cubical panel should be indoor type

with IP 43 and IK 10,Metalized polypropylene

film tye3-phase 528/550Volt Capacitor,De

tuning Reactor for each capacitor,Panel

having Short Circuit and Overload

protection,Each step Capacitor having

suitable MCB with Sc, OL, internal earth fault

relay,Each stage having Stage Contactor

(Capacitor load rating),PF regulator master

controller having suitable steps with LCD

display, Rs 485 Communication port,

Indication LED Lamps for main incomer and

ON-OFF for each capacitor bank,MS Chanel

for Floor mounting, Cable entry as per site

situation,Cooling fans for panel

3.35 Supplying & erecting approved make IP

grade Company fabricated Timer Panel of

following capacity for switch On-Off street

lights on time scheduling basis made from

16G CRCA sheet duly epoxy power painted

inside and outside with hinged doors and

locking arrangement consisting of suitable

size of 4 Pole MCB and 4 pole contactor (cat-

III)with analog time switch, auto manual

switch of same make and suitable input and

output Bakelite terminals and with door

earthing approved by Engineer in charge.

MCBDBs and MCBs

3.36 510.00 providing and erecting Miniature circuit 122.00 E.a.

breaker single pole 6A to 25A suitable to

operate on 240 V A.C. system and having

breaking capacity 10 KA to be erected in

existing box. confirming to IS 8828/1996 with

3.37 Providing & erecting 240 V MCB double pole

switch for motor & inductive load (C Curve)

having 10 KA breaking capacity & confirms to

IS : 8828 in existing box having following

3.38 Providing & erecting 415 V MCB Four Pole

for Motor & Inductive Load (C Curve) having

10KA breaking capacity & confirms to IS

:8828 in existing box having following capacity

3.39 6.00 Sheets steel powder coated enclosure 175.00 E.a.

suitable for incorporating One/Two nos. MCB.

3.40 Providing and erecting Sheet Steel powder

coated MCB distribution board - flush /

surface mounted fitted with busbar, neutral

link, earth bar and DIN rail, Conforms to IS

8623-1 & 3, IEC 61439-1 & 3 without MCB to

house appropriate nos. of MCBs.(The DBs

should be used of same company of MCB to

be used) suitable for

(A) single phase incoming and horizontal

single phase outgoing

(b) sheet steel double door (IP-43)

3.40.1 4.00 (i)4 way ( concealed manner ) 747.60 E.a.

3.40.3 25.00 (iii)8 way ( concealed manner ) 1369.20 E.a.

3.40.5 3.00 (iv)12 way ( concealed manner ) 1773.60 E.a.

3.41 (B) three phase incoming and single phase

horizontal type outgoing Per phase isolation

(b) sheet steel double door

3.41.1 5.00 (i)4 way ( concealed manner ) 2779.20 E.a.

3.41.3 14.00 (ii)6 way ( concealed manner ) 3462.00 E.a.

3.41.5 12.00 (iii)8 way ( concealed manner ) 4054.80 E.a.

3.42 Providing and erecting Sheet Steel powder

coated Vertical MCB distribution board

(VTPN) - flush / surface mounted double door

(IP54) fitted with insulated copper busbar,

isolated neutral link, earth bar and DIN rail,

confirming to IS 13032 and BS 5486-1986,IP-

54 suitable for 63/100 AMP TPN MCCB +

RCCB as incomer and three phase outgoing

as per following .(The DBs should be used of

same company of MCB to be used)

3.42.1 6.00 (A)4 way outgoing 9925.00 E.a.

3.42.2 1.00 (B)6 way outgoing 12061.00 E.a.

3.43 Providing and erecting Sheet Steel powder

coated Vertical MCB distribution board

(VTPN) - flush / surface mounted double door

(IP54) fitted with insulated copper busbar,

isolated neutral link, earth bar and DIN rail,

confirming to IS 13032 and BS 5486-1986,IP-

54 suitable for 250 AMP TPN MCCB +

RCCB as incomer and three phase outgoing

as per following .(The DBs should be used of

same company of MCB to be used)

1.00 (A)4 way outgoing 13315.00 E.a.

3.44 Providing & erecting 415 V MCB three Pole

for Motor & Inductive Load (C Curve) having

10KA breaking capacity & confirms to IS

:8828 in existing box having following capacity

3.45 Providing and erecting Approved make Three

pole moulded case circuit breaker having

breaking capacity ICU of 25 K.A. at 415 V

having normal current rating up to 25 A to

100A. with Fixed thermal & magnetic release

suitable to work on A.C. supply 50 Hz. with all

internal connections, spreader tinned copper

& complete erected in existing 16 G.M.S.

6.00 ICS=100% of ICU only 5832.00 E.a.

3.46 Providing and erecting Approved make Four

pole moulded case circuit breaker having

breaking capacity ICU of 35 KA. at 415 V.

having Normal current rating 200A.with

Microprocessr release having Overcurrent

Range 40-160A suitable to work on

A.C.supply 50 c/s. with all internal

connections, spreader tinned copper &

complete erected in existing

2.00 ICS=100% of ICU only 23850.45 E.a.

3.47 providing and erecting Approved make ELCBs

/ RCCBs conforming to IS: 12640 and having

sensitivity of 30 mA and Short Circuit

withstand capacity of 10 KA and suitable for

operation on single phase 240 V,50Hz. having

characteristic of quick action & tripping with all

advance feature & do not incorporate any

electronic component. for following Max.

rating erected as directed

3.48 Providing and erecting Approved make

RCCBs conforming to IS: 12640 and having

sensitivity of 30 mA and Short Circuit

withstand capacity of 10 KA and suitable for

operation on 3 phase and neutral 415V,50Hz.

having characteristic of quick action & tripping

with all advance feature & do not incorporate

any electronic component for following Max.

rating erected as directed.

3.49 30.00 Providing and erecting metallic vitrified danger 69.00 E.a.

notice board as per language suggested by

engineer incharge for MEDIUM VOLTAGE

installation to be erected as per IS-2551.

3.50 42.00 Providing & erecting Medium Voltage Danger 26.00 E.a.

Notice Board sticker as per language

suggested by engineer incharge of standard

size as per IS-2551

SUB - TOTAL OF Switchgears , Panel and

Follow IS code :3043 is the guideline for

4.1 850.00 Providing and erecting required size HOT 77.00 KG

deep Galvanised iron strip for earthing of H.T.

, OCB/ ACB/ Transformer LT panel board,

Motors etc. using proper clamp.

4.2 130.00 Providing and erecting required size Copper 787.00 KG