Supplying, Installing, Testing and Commissioning of 125KVA DG set and related items at “L” type barrack, Sabarmati Central Jail. Ahmedabad. (First attempt)

Name of Work: SITC of 125KVA DG set with related items at L type barrack, Sabarmati Central Jail.Ahmedabad.

Schedule of rate for R & B / 2026-27 (June 2026) (Without GST)

Item Description Qty Unit Rate Amount (Rs.)

1 Supplying and erecting, commissioning and testing 125 KVA Diesel Generating set as per the latest CPCBIV+ norms having continuous 1.00 Each 12,25,655.00 RS: Twelve lac Twenty

rating, 3 phase, 415 volts, 50 cycles A.C. supply comprising of a totally enclosed Water cooled diesel engine with multi-cylinders Inline Five Thousand Six

arrangment developing suitable BHP not less than following capacity at 1500 RPM with 10% overload for one hour in 24 hours Cost Hundred Fifty Five

including liaison work i.e. Preparation of site plan tracing & its blue prints, Site plan approval from Energy & Petro. div., KWH Meter testing for only

D.G. Set, Site test report & other license stamped letter issuing, Certificate from Elect. Inspector, Registration at Elect. Duty wing, Kutch.

D.G.Set inclusive::: Testing: Testing means full load & 10% over load testing of D.G.Set at Company / Dealer work shop. Cost inclusive of

Diesel, To & Fro Fair, Lodging boarding etc. of two engineer of corporation. Also full Diesel tank with diesel ( 100% ) At the time of handing

over D.G.Set to Benficial. 200 Ltr Capacity Heavy Duty standard oil M.S./PVC Barrel & Diesel Filling hand Pump of required capacity.Agency

has to give service & All in All maintanance contract As per tender Item to OEM. During defect liability Period .Agency has to replace

oil,Diesel,filter,air filter,filing up DEF ( Diesel Exhuast Liquid ) etc as per site reguirement and OEM Guideline & working hour of D.G set.

Agency has to Provide fitness certificate at time of final SD release.)..All parts of the DG set are warranted for the defect liability period and the

agency will replace them free of charge in case of manufacturing defects, transport damage or lack of regular service. The details

Specification of DG se is As Per Annexure A125

Executing comprehensive (All -in-All) service & manitenance with spare parts as per terms & condition of tender DG manufacturer for defect 1.00 Job 94,000.00 RS: Ninty Four

liability period. For that main agency has togive All-in-All comprehensive maintenance contract to DG manufacturer and copy of this contract Thousand only

will be submited before final bill. Agency has to quote rate accordingly. Agency has to also provide the fitness certificate from DG manufacturer

and submit to GSPHCL. Agency has to submit FDR of approved bank as per clause 2.0 section 3 Rs. 94000.00 + GST or quoted rate which

ever is higher to GSPHCL.for minimum maturity period of four years in favour of GSPHC . Which will be releared after successful completion

2 of AMC & at the and of defect liability period. DG OEM has to mantain written record of service & maintenance during defect liability daily

period duly sigh by police dept. and submited regularly to GSPHCL. DG agency has to do maintanance as per terms & condition In tender.

Agency have Replace outer Air element ,Filter Element Primary, Oil Filter, Filter Element Secondary, Gesket, battery, charger, Valve Cover,

Belt Alternator, Fan Belt, Lube Oil, Coolent etc.Cost Of Diesel not Included in this item during defect liability Period as per site required &

working hours of DG set, OEM has to Provide Fitness certificate at time of releasing S.D

Providing and erecting Medium Class FIA approved and ISI mark white colour (embossed) RIGID PVC PIPES of following size complete 30.00 Mtr. 24.00 RS: Twenty Four

3a erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & clamps on / in wall / ceiling along with continuous fish wire only

to draw mains with necessary fittings and junction boxes for following dia. (a) 20 mm. dia.

For 25 mm. dia. 30.00 Mtr. 33.00 RS: Thirty Three

Providing & fixing 25 mm. dia. PVC insulated G.I. corrugated Flexible pipe with necessary socket, PVC bushes saddle, Check-nuts etc. 30.00 Mtr. 37.00 RS: Thirty Seven

complete of following sizes. only

Item Description Qty Unit Rate Amount (Rs.)

Providing & Erecting 2.0 mtr long Earthing system by making minimum bore of 225 mm dia in soft soil. Suitable for doing pipe-in- 4.00 Each 6000.00 RS: Six Thousand

pipe technology earthing.Earthing electric rod must be made from Corrosion free Hot dip galvanizing pipes having following only

(A) Earthing Electrode: outerpipe:- 88 mm minimum O.D., ISI 'B ' Class ISI mark of Reputed Brand, Inner pipe:- 42 mm minimum

O.D., Pipe B Class ISI mark reputed Brand Terminal Size: 70mm X 100mm length, Terminal Should be made from inner pipe for

that pipe must be pressed and gave rectangular shape so its work as a terminal.The hot deep galvanising must be done after

above process.Galvanised thickness must be minimum 75 micron any where. SS Nut bolt:- 2 no.with washer suitable for 14mm

dia. hole must be provided at terminal. total minimum Weight(approx.) of earth electrodewith inside conductive material minimum

should be 26 kg.

(B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm/meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no

load & dry form, Sulphar content:- <2%

(C) Back fill Compound:- Earthing compound should be capable to retain moisture for long time Back Filling Compound weight is

1. Short circuit test by ERDA/ CPRI for 25KA

2. Resistivity test of conducting material from NABL accredited lab.

3. Hot dip galvanised / zinc coating micro test from reputed laboratory.

4. General test report from OEM regarding specification of earthing.

[Make and model approved by EIC Strictly subject to item specification only] [OEM has to submit all detail & sample for approved

before supplying]

[Water must be poured in bore before starting earthing. Earthing value must be measured with earth tester. Agency has to bring

the earth resistance to at least 02 ohms & voltage between neutral & Earthing upto 02 volt. Agency has to maintain earthing & its

value for one year. Earthing must be done in the presence of A.E. (GSPHCL)]

Providing & Erecting Earthing Chamber and cover:- Earthing chamber should be size of 400 mm X 400 mm X 400 mm depth and 4.00 Each 1025.00 RS: One Thousand

Cover should be heavy duty cast iron with required size of 300 mm X 300 mm X 4 mm thick. Necessary test report must be Ten Hundred Twenty

submitted. Five only

For above earthing additional charges for boring in hard rock soil (by breaker) & filling soft soil in earth pit (certificate for soil have to given by 4.00 Each 325.00 RS: Three Hundred

5c DEE / AE along with photographs) Twenty Five only

Providing & erecting L.T. Current Transformer with bar primary 50/5 to 1000/5 ratio 15 VA burden havong 0.5 class accuracy erected in 3.00 Each 272.00 RS: Two Hundred Seventy Two

6 existing CRCA box duly secured with insulating materials connected to the meter

Supplying & erecting 12 mm thick backelite sheet of approved make and grade on 25 x 25 x 3 mm red oxide painted angle iron frame suitable 2.00 Sq. Mtr. 2289.00 RS: Two Thousand

for fixing ICDP SWITCH and energy meter (contractor shall make approved drawing of Bakelite sheet To arrange required No. of Energy Two Hundred Eighty Nine

7 meter & ICDP switch -busbar etc. as per Actual space available in electrical room at site) only

Providing and erecting metallic vitrified danger notice board as per language suggested by engineer incharge for MEDIUM VOLTAGE 2.00 Each 69.00 RS: Sixty Nine

8 installation to be erected as per IS-2551. only

Providing, erecting, fabricating the M.S. structure as per requirement of site as per structure design Including proper size approved by EIC of 1500.00 kg 77.00 RS: Seventy Seven only

M.S. angles, flats, bars, square pipe, channels, sections (Tata,Zindal,Asian,Jsi Make) complete with cutting, welding, grinding and finishing

duly painted with Asian/Nerolac make premium quality oil paint and true care red oxide metal primer,asian paint make with erection on site as

9 per direction of engineer in charge with necessary grouting cementing, plastering and finishing complete. All hole opening of square pipe end

must be closed with M.S plate welding. Payment will be done on KG as per Actual weight.

Providing and erecting required size HOT deep Galvanised iron strip for earthing of H.T. , OCB/ ACB/ Transformer LT panel board, Motors etc. 85.00 Kg 77.00 RS: Seventy

10 using suitable size insulator clamp with min. 80 micron with sleeve as per IS. Test certificate must be submiited by agency Seven only

Item Description Qty Unit Rate Amount (Rs.)

Supplying and erecting approved make GRP/FRP Perforated type Cable Tray Material – Corrosion Resistant Polyester Flame Retardant U.V. 40.00 Rmt 230.00 RS: Two Hundred

Stabilized Resin System - Manufactured from Pultruded Sections- Polyester Resin System, Glass Content : 55 – 60 % - - Standard Length : Thirty only

3000 mm- Support Span – 1500 mm, Deflection L/200 - Specification NEMA FG1 1993- UV Resistant - Flame Retardant – IS 6746 -

Appendix K/UL 94, Very Low Flammability - Specification Followed NEMA FG1 1993 Oxygen Index – Minimum 30% as per ASTM D 2863 -

11a Flame Spread (Extent of Burning) – 20 mm as per Standard ASTM D 635 - Tensile Strength – 4000 – 8000 Kg/Cm2 as per Standard ASTM D

638 - Flexural Strength – 2500 – 10000 Kg/Cm2 as per Standard ASTM D 790- Izod Impact Strength – 130 Kg/Cm2 as per Standard ASTM D

256- Compressive Strength – 2500 – 5000 Kg/Cm2 as per Standard ASTM D 695- Barcol Hardness – 50 – 65. For Width - 150 mm,

Pultruded “C” Channel with 30mm Sides 3 mm Thickness, Loading 15 Kg./Mtr.

Supplying & erecting Sintex or approved make SMC press moulded composite FRP. loop-in, loop-out approx. 2mm thick box complete with 2.00 Each 890.00 RS: Eight Hundred

bakelite connector strip 4way & hinged doors having locking arrangements with mounting clamp with nuts, bolts & washers suitable for Ninty only

erection on pole with cable clamps& earth bolt of following size of box.a) 300mm x 200mm x 100mm [deep]

Providing & erecting FRLS -XLPE (IS : 7098) (I)-88 ISI marked armoured Aluminium conductor cable for 1100 volt to be laid 90 cms. Under 150.00 mtr 642.00 RS: Six Hundred

ground or to be laid on wall with suitable G.I. heavy guage 1.0mm thick cable clamp or in existing DWC pipe underground or road crossing Forty Two only

12 or floor. For 3 1/2 core 120 Sq. mm ( 70 Sq. mm 1/2 core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid on wall with necessary 50.00 Mtr. 451.00 RS: Four Hundred

13 clamps 1.00 mm thick to be laid 90 cms underground with 1.00 mm thick G.I heavy duty grade or in existing trench / pipe at road crossing or Fifty One only

floor of following size of cables. For 4 core 4 Sq. mm

Providing & fixing Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high 6.00 Each 45.00 RS: Forty Five only

14a pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. For 120 Sq.mm.

14b For 70 Sq.mm. 2.00 Each 25.00 RS: Twenty Five only

Providing & fixing Solderless crimping type Copper lugs conforming to IS suitable for cable of following size evenly crimped with high pressure 50.00 Each 8.00 RS: Eight only

15 tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. For upto 6 Sq.mm.

Providing & fixing Double compressed heavy duty flange type brass cable gland with rubber ring for P V C insulated armoured cable complete 8.00 Each 43.00 RS: Forty Three

with outgoing tails, insulating tape etc. For following size cables. For 2 to 4 core x 4.0 Sq. mm only

Providing & fixing double compressed heavy duty flange type brass cable gland with rubber ring for P V C insulated armoured cable complete 12.00 Each 139.00 RS: One Hundred Thirty Nine

with outgoing tails, insulating tape etc. For following size cables.(For 3 1/2 core x 120.0 Sq. mm (Sigma, MCI, Comet Make Only)

Providing & Erecting Flexible PVC insulated multistrand multicore 1.1 kv grade ISI marked copper wires of following size to be erected as 50.00 Mtr. 96.00 RS: Ninty Six only

directed. For 3 core 2.5 sq.mm. PVC insulated round copper wire ISI mark.

providng and erecting Approved make. energy meter 3 phase 4 wire unbalanced load 500 V.50A / 100A complete erected as directed with 1.00 Each 2586.00 RS:

Two Thousand Five Hundred Eighty Six only

necessary earth wire. Cat-iii

Suitable set of 3 Nos CTS for 100A and above as required for Energy Meter including testing charges as required by Electrical Inspector. 2.00 Each 2085.00 RS: Two Thousand Eighty Five

Providing & Erecting Mains with ISI marked, 1.1 KV grade electrolyte multi stranded, annealed copper conductor with heat resistant PVC 51.00 Mtr. 21.00 RS: Twenty One only

insulated conforms to IS:694, IEC - 227 erected in existing pipe of following size (Specifically for control panel, relays, power switchgears,

motor starters & control wiring) with required size of copper lugs, nuts and bolts if required. For One Wire 1.5 sqmm

21b For One Wire 2.5 sqmm 50.00 Mtr. 34.00 RS: Thirty Four only

21c For One wire 4.00 sq. mm 50.00 Mtr. 46.00 RS: Forty Six only

For One wire 10.00 sq. mm 50.00 Mtr. 114.00 RS: One Hundred

For One wire 16.00 sq. mm 50.00 Mtr. 176.00 RS: One Hundred

Seventy Six only

For One wire 25.00 sq. mm 29.00 Mtr. 293.00 RS: Two Hundred

Ninty Three only

For One wire 35.00 sq. mm 30.00 Mtr. 373.00 RS: Three Hundred

21a Seventy Three only

For One wire 50.00 sq. mm 30.00 Mtr. 583.00 RS: Five Hundred

Eighty Three only

For One wire 70.00 sq. mm 28.00 Mtr. 829.00 RS: Eight Hundred

21c Twenty Nine only

Supplying & Erecting of TATA Blue scope GI sheet having 0.45 mm thickness with Zinc Alluminium alloy coating Fixed with galvanized iron J 25.00 Sq.mtr 977.38 RS:

Nine Hundred Seventy Seven and Paise Thirty Eight only

or L hooks, bolts and nuts.

Item Description Qty Unit Rate Amount (Rs.)

23 Desiging,fabricating,testing at panel manufacuturer workshop and Providing & erecting at site weather proof, dust & vermin proof, 3.00 sq.Mtr 21500.00 RS: 64,500.00only

Twenty One Thousand Five Hundred

floor mounted front operated indoor type cubical panel board having IP-54 made from 2 mm. thick CRCA M.S. sheet for outer

body,gland plate & doors, 1.6 mm. thick CRCA M.S. sheet for internal partitions with necessary supporting angles, flats including

skirting, bending, drilling, welding, riveting with internal partitions & cable alley,rubber gromets, rib, control wires, backelite control

fuses as per requirements,sufficient nos. of hinges for doors, door locking arrangement, rubber gasket complete with Required

Nos. heavy Duty Connector with Cadmium plated nut and bolt for Anti rusting and earthing Al.busbar, nuts/bolts,washer etc as per

instruction of engineer-In-Charge. Seperatly supplied item like switchgears, busbars and PVC FRLSH copper wire with suitable

size for power interconnection,measuring instruments, foundation flange-bolts-base plates. cost of C channel/angle iron stand (1ft

to 2ft height as per cable size)shall be excluded of panel fabrication. The panel shall be supplied with Seven Tank chemical

process. which shall be carried out before applying painting, painted with powder coating. (The rates excludes the cost of

switchgears, busbars, interconnecting mains & Copper / Aluminium strip, fuse, meters etc. The dimension shall be measured

excluding base beams.switchgear of approved brand and specification shall be used and erected at CPRI approved panel

manufacturers only. Busbar compartment must be separate for easy termination of tails/cables and to avoid least distance of

punching holes in busbar. Panel depth shall be 350 mm.

electrical meter calibration report. Agency should design the panel in such a way that there should not be any excess in panel area

(sq.mtr) & length of bus-bar (mtr), if any excess is need to be done agnecy has to draw attention to GSPHCL at the time of

approval of G.A. drawing.

Loading and unloading of above item shall be done by hydra and skill work force under supervision of electrical engineer and

guidelines given by manufacturer to avoid damage to the item.

Size of door and Ele. room / Pump room shall be measure and provide to panel manufacturer to prepare GA drawing considering

the size of electrical room/pump room door and also inside size of it. Agnecy has to co-ordinate with civil agency for giving proper

dimenssion of electrical room/pump room to accomodeted panel easily.[Including Necessary numbering / marking on PANEL done

with red colour radium sticker as per site requirement and instructions given by EIC on site. Font / number size given by EIC on site

as per requirement] (See attached details specification of panel & manufacture also while quoting rate. [Manufacturer must be of

Gujarat state so three stage inspection can be done if required and service support]

24 Supplying and erecting tripple pole & neutral 440V / 500 V Panel mounting Copper Busbars with four equal Nos. of electrolyte bus 1.00 Rmt 4861.00 RS: Four Thousand Eight Hundred Sixty4861.00

having current density not more than 1.6 Amp. / sq.mm (Rated current / cross section area) duly wraped with colour insulating tape

for phase sequence of following current carrying capacity, erected with necessary bus bar supports / insulators, main cable socket

to each bar, erected in existing cubical panel with necessary connections.For electrolyte copper busbars Suitable for 300 Amp.

25 Providing and erecting following additional parts for panel mounting MCCBs for Extended operating rotary handle with pad lock 3.00 Each 952.00 RS: Nine Hundred Fifty Two only

with three position trip,off,on suitable for 25A to 250 A panel mounting. Company must be same as Switchgear company.

26 SITC of ATS with controller for 250 Amp of ampere capacity in existing housing with internal wiring and required accessories etc. 1.00 Nos. 83301.50 RS:

Eighty Three Thousand Three Hundred One and Paise Fifty

The switch has automatic transfer switch consists of an intelligent controller and a modular load break switch which automatically

transfers the load to the emergency power source when it detects the normal power source under/over voltage, under/over

frequency, or phase loss. The switch has three operational positions (Source I, Center-off, Source II). The switch has technical

specification as mentioned:

1. Rated insulation voltage:800 V

2.Rated impulse withstand volate: 8KV

3.Rated frequency:50/60HZ

4. Operational Volatge: 415 V

5.auxilary contact: 4 max

(socomec, schneider make or EIC)

27 Supplying and Erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 50 K.A. at 415 V. 3.00 Nos. 27477.00 RS:

Twenty Seven Thousand Four Hundred Seventy Seven on

having normal current rating 400 A. with Variable thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all internal

connections spreader tinned copper & complete erected in existing 16 G.M.S. housing. housing. ICS=100% of ICU only

28 Providing and erecting Meter cover made from multi chamber hollow PVC sections of 20 mm thick having all the corner joints with 2.00 sq mtr 3306.00 RS: Three Thousand

PVC solution angles without using any screws, nails shutters having required size of eye glass and with necessary locking Three Hundred Six

arrangement hinged with box. The back of meter box should be fixed with timber. Hold fast for holding screws or nut bolts. only

Item Description Qty Unit Rate Amount (Rs.)

29 Providing and fixing of ABC Type Store Pressure Fire Extinguisher Having capacity 6 kg Filled with Mono Ammonium Phosphate 2.00 Each 1991.00 RS: One Thousand

Powder 50% confirms to IS 4308, Stored Pressure Type, UGTS Pressure Gauge, Can Height 530 mm, Diameter 150 ± 10mm, Nine Hundred Ninty One

Discharge Time 24 Sec, Controllable discharge mechanism, Jet Range 5 Meters, Average Discharge is 92%, applicable on Class only

A,B & C and electrically started Fire, Fire Rating 4A:144B, Can Construction : Deep drawn & CO2 Mig welded, EPDM(Ethylene

Propylene Diene Monomer) Rubber Hose with both end Aluminum clamped, Internal Coating - Epoxy Powder coating, External

Coating - Pure Polyester Powder coating (UV Resistant),Brass forged CE Marked valves with NRV & Auto Safety Release with

safety Pin is of SS material, Made up from 1.6mm thick sheet, Extinguishers confirmed to IS 15683:2018 and ISI marked.

Referance Weight:-Gross Weight 8.9 Kg, Empty Weight 2.9 Kg, 1. Necessary certificate & and guarantee must be attached,

OEM has to provide wall mounting heavy duty bracket/clamp, screw, hardware for installation. 3.Following printed marking

Manufacturing Date and Expiry Date must be mention on Extinguisher 4. Refilling period must be of 3 Years. Following Printed

marking on equipment must be required:- Model No, Capacity, Gross Weight, Content, Fire Rating, Batch No, Serial no, Mfg

Month, Refilling Due. [with necessary numbering / marking with oil paint by painter as instructions given by G.S.P.H.C.L engineer]

(Make: KANEX, MINIMAX,CEASEFIRE)

30 Providing and fixing of CO2 type High Pressure Portable 4.5 kg Fire Extinguisher, filled with Co2 Gas as per IS 15222, Control 2.00 Each 6526.00 RS: Six Thousand

discharge mechanism fitted with 1 Meter Wire Braided Hose & Electrical non-conductor Polyethylene Flat Horn with Diffuser Nozzle Five Hundred Twenty Six

for dispersed discharge of CO2, Discharge Time 12 Sec, Average Discharge is 95%, Applicable on Class B, C and electrically only

started Fire, Fire Rating 55B, Internal coating is not applicable & External coating is of enamel spray painting, Powder Coated

Handle, Valve Confirm to IS 3224 ISI Marked, CO2 Cylinder construction: hot spinning by seamless pipes & bearing ISI mark, Body

confirms to IS 7285 and PESO ( Petroleum and Explosives Safety Organization) APPROVED, Minimum Wall Thickness 4 to

mm, Extinguishers confirmed to IS 15683:2018 and ISI marked. Referance Weight:-Gross Weight 16.4, empty weight 11.9 Kg,

Necessary certificate & and guarantee must be attached, 2. OEM has to provide wall mounting heavy duty bracket/clamp, screw,

hardware for installation. 3.Following printed marking Manufacturing Date and Expiry Date must be mention on Extinguisher

Refilling period must be of 5 Years. Following Printed marking on equipment must be required:- Model No, Capacity, Gross Weight,

Content, Fire Rating, Batch No, Serial no, Mfg Month, Refilling Due. [with necessary numbering / marking with oil paint by painter

as instructions given by G.S.P.H.C.L engineer] (Make: KANEX, MINIMAX,CEASEFIRE)

Item Description Qty Unit Rate Amount (Rs.)

31 Providing and fixing of Automatic type 5 kg Fire Extinguishers Mono Ammonium Phosphate powder 50% Confirms to IS 4308, 2.00 Each 5240.00 RS: Five Thousand

Applicable fire classes A,B & C, UGTS Pressure Gauge, Can Height 370mm, Diameter 230 ± 10mm, Made up from 2 mm thick Two Hundred Forty

sheet, Body Construction Deep Drawn with MIG Welding technology, Brass forged sprinkler valves with Nozzle is specially only

designed to give more than 99% discharge. Together with orifice characteristic to cover adequately fire risks with scattering cone of

40 to 45° Angle. External Pure polyester (UV resistant) and Internal Epoxy polyester powder coated, Heat Sensitive Glass bulb of

68 °C. Area covered will be 2-2.5 m2 and volume of coverage is 7 m3. Referance Weight:-Empty Weight 2.64 kg, Full weight

kg, 1. Necessary certificate & and guarantee must be attached, 2. OEM has to provide heavy duty wall/ Ceiling mounting

Bracket/ clamp, screw, hardware for installation. 3.Following printed marking Manufacturing Date and Expiry Date must be mention

on Extinguisher 4. Refilling period must be of 3 Years. Following Printed marking on equipment must be required:- Model No,

Capacity, Gross Weight, Content, Fire Rating, Batch No, Serial no, Mfg Month, Refilling Due. [with necessary numbering / marking

with oil paint by painter as instructions given by G.S.P.H.C.L engineer] (Make: KANEX, MINIMAX, CEASEFIRE)

Total Electrical Amount In Rs.

Assistant Engineer (Elect.) Dy. Ex. Engineer (Ele) Executive Engineer (Elect.)

G.S.P.H.C.Ltd. G.S.P.H.C.Ltd. G.S.P.H.C.Ltd.

Ahmedabad Vadodara Gandhinagar