COMPREHENSIVE MAINT INCLUDING PERIODICAL SERVICES AND DAY TO DAY MAINTENANCE WORK OF B R AND E M NATURE WORKS FOR ASHOK BUILDING 1 TO 8 AT KATARIBAGH UNDER GE NW KOCHI

Amount

M&L for preperation of old decorated surfaces of walls (plastered or unplastered) including cornices and applying one coat of distemper oil emulsion complete all as specified and as directed.

M&L for complete removal of old decorated surfaces of walls (plastered or unplastered) including cornices preparation and applying two coat of distemper oil emulsion over a coat of primer complete all as specified and as directed.

M&L for applying 3mm thick wall care putty on old /new plaster surface of wall complete all as specified and as directed.

Taking down cement plaster on Brick/Concrete wall and ceiling including racking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.

M&L for rendering 8 mm thick in CM 1:4 with approved water proofing compound over backing coat of 12 mm thick in CM 1:6 using liquid WPC on fair surfaces of brick work or concrete surfaces, finished even and fair complete all as specified and as directed. Note: Water proofing compound shall be paid separately.

Supply only liquid water proofing compound complete all as specified and as directed.

M&L for rendering 10mm thick on brick or concret wall surfaces with cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and as directed.

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon aditives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.

M&L for preparation of new plastered surfaces of walls including cornices and applying two coat of distemper oil emulsion over a coat of primer complete all as specified and as directed.

S&F in repair tubular towel rail 20mm dia brass chromium plated with brackets fixed in repairs 60cm long complete all as specified and as directed.

S&F in repair stainless steel curtain rail bright finished 20 mm dia decorative type complete all as specified and as directed.

S&F in repair stainless steel bright finished decorative brackets/finials for curtain rail 20mm dia complete all as specified and as directed.

S&F in repair door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed in repair in floor, 140mm over length of cover plates complete all as specified and as directed.

S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

Hacking out old broken glass (any thickness size, quality or description) from wooden frames glazed with putty or fitted with beads not exceeding 1.50 Sqm complete all as specified and as directed.

S&F sheet glass ordinary quality 3.00 mm thick and glazing with oil putty / beads in squares not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

S&F 4.00mm thick frosted glass pin head type and glazing with oil putty / beads in squares not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

S&F in repair vitreous China wash down water closet (pedestal pattern) white (including fixing bolts) including removing old one and connection to drain and flush pipe complete all as specified and as directed.

S&F in repair Snow white vitreous China wash down water closet wall mounted with slim soft close seat cover (including fixing bolts) including removing old one and connection to drain and flush pipe complete all as specified and as directed.

S&F in repair plastic water closet seat for single piece closet, white , closed pattern with flat bottom, and cover and mild steel chromium plated or alumininsed hinging device complete all as specified and as directed. Make: Parryware EWC Seat cover E 8305 Ultra Solid white or equivalent make as per list of approved makes.

Repairs to concealed fushing cistern of any make or brand complete all as specified and as directed.

M&L in repair and replacement of concealed fushing cistern internal parts like inlet valve & piston set, float valve, syphon set, angle valve, washer of any make or brand complete all as specified and as directed.

S&F in repair concealed fushing cistern with dual push flush button including dismantling of old cistern, wall tiles complete all as specified and as directed.

S&F in repair stainless steel butt hinges medium weight for 100mm size complete all as specified and as directed.

S&F in repair stainless steel butt hinges medium weight for 75mm size complete all as specified and as directed.

S&F in repair extruded aluminium alloy handles fabricated type anodised 150 mm size complete all as specified and as directed.

S&F in repair extruded aluminium alloy handles fabricated type anodised 100 mm size complete all as specified and as directed.

S&F in repair aluminium anodised barrel tower bolt extruded section of 150 mm long complete all as specified and as directed.

S&F in repair aluminium anodised barrel tower bolt extruded section of 125 mm long complete all as specified and as directed.

S&F in repair 300mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

Dismantling of floor hearth or wall tilling tiles including CM bedding (but not backing) and disposing the rubbish off the premises complete all as specified and as directed.

M&L for non skid coloured ceramic tiles 7 to 8 mm thick square/rectangular area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including provision of CM screed 15 mm thick in CM (1:6) complete all as specified and as directed.

M&L for glazed ceramic tiles in vertical surface 350x 250x7 mm/ 450X 350X7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including provision of backing coat 10 mm thick in CM (1:4) complete all as specified and as directed.

S&F in repair vitreous china wash hand basin of size 580 x 450 mm white, flat back with and including waste fittings brass chromium plated 32 mm with long and fly nut screwed shank excluding taps, waste chain and plug and porcelain stopper but including cast iron brackets complete all as specified and as directed.

S&F in repair pillar tap with aerator, brass, with capston heads, fancy type chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed. Make : Parryware Cart Part No.Crust T3102A1 or equivalent make as per list of approved makes.

S&F in repair SS grating square 125 mm size with centre circular section removal and fixing type complete all as specified and as directed.

S&F in repair PVC bathroom cabinet (white) of size 420 x 300 x 100mm (approx), with one single shutter and built in mirror in front of shutter complete all as specified and as directed.

S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glassshelf 12 cm wide with chromium plated guard and railing size 60cm long (with brass bracket complete all as specified and as directed.

S&F in repair corner glass shelf of 5mm thick plain sheet glass and with brass, chromium plated bracket complete all as specified and as directed.

S&F in repair SS toilet paper holder including fixing screws complete all as specified and as directed. Make : Jaquar Cat No.AKP-35751 or equivalent make as per list of approved makes.

Taking down shutter of any description exceeding 1.00 Sqm and not exceeding 2.0 Sqm including re-securing or easing and adjusting and refixing in same opening complete all as specified and directed.

Taking down shutter of any description not exceeding 1.00 Sqm including re-securing or easing and adjusting and refixing in same opening complete all as specified and directed.

M&L in repair for 18mm thick Marine plywood, water proof, termite & Borer proof, corrosion free with Decorative laminate 1mm thick both side for cupboard shutter, self, Drawer, complete all as specified and directed.

S&F in repair stainless steel auto closer counter sunk hinges complete all as specified and directed.

S&F in repair ball bearing runners 45 mm, 450 mm longTelescopic ball bearing drawer channel full extension load capacity 50 kgs complete all as specified and directed.

S&F in repair 100mm long stainless steel handle complete all as specified and directed.

S&F in repair brass Mortice lock two leaver, vertical type, size 100 mm complete all as specified and directed.

S&F in repair Aluminium (Die cast) body Door closer hydraulically regulated,designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S&F in repair Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete complete all as specified and directed.

S&F in repair powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F in repair powder coated aluminium ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap eading, screws etc. complete all as specified and directed.

S&F in repair powder coated aluminium window and ventilator shutters, sliding/side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

S&F powder coated aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with inimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge.

Taking down Copper /aluminium point wiring (light ,fan ,socket ,bell, power point ) complete fitting such as switches ,ceiling roses ,pendants,regulators,sockets ,light fitting any type, building security light removing materials to store for keeping in safe custody for taking credit to match with existing surface complete all as specified and directed.

M&L for point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits) with 1.5 sqmm nominal cross sectional area, copper conductor unsheathed FRLSH cable 1100 Volts grade ISI marked with valid CML No. single core multistranded cable in and including medium grade PVC casing and caping not less than 20mm dia and accessories ISI marked with valid CML No. (IS-9573-1983 for conduits and IS: 3419: 1976 for conduit accessories) and with all accessories and modular box made for mounting of switch, socket and fan regulator with modular frames covers including chase cutting and making good to the disturbed surface and matching to the existing finishes specifications including 1.5 Sqmm nominal cross sectional area PVC insulated copper conductor unsheathed FRLSH cable single core multistranded cable as earth continuity wire for one light point controlled by one switch, complete all as specified and as directed.

All as per item No 2 here-in-before but for one fan point controlled by one way switch on independent board.

All as per item No 2 here-in-before but for one bell point controlled by one push button on independent board.

All as per item No 2 here-in-before but for 5 pin 5 Amps socket outlet point on independent board.

All as per item No 2 here-in-before but for 5 pin 5 Amps socket outlet point on same board.

All as per item No 2 here-in-before but using 2.5 sqmm copper conductor cable (multistranded) PVC insulated FRLSH and unsheathed cable and 2.5 sqmm copper conductor cable (multistranded) PVC insulated FRLSH and unsheathed cable earth wire with terminal box of suitable size of modular switch & socket for one 6 pin 15 Amp socket outlet point on independent board complete all as specified and directed.

Material and labour for point wiring for one light point with 1.5 sqmm PVC insulated (FRLSH) unsheathed copper conductor multistranded 1100 volts grade controlled by one way switch including 1.5 sqmm PVC (FRLSH) insulated unsheathed copper cable multistrand conductor 1100 volts grade for continuity conductor including connected to common earth dolly drawn through and including rigid PVC Conduit medium grade ISI marked Concealed of suitable size with all accessories and modular box made for mounting of switch, socket and fan regulator with modular frames covers including chase cutting and making good to the disturbed surface and matching to the existing finishes specifications complete all as specified and as directed.

All as per item No 62 here-in-before but for one fan point controlled by one push button on independent board.

All as per item No 62 here in before but for one bell point controlled by one 5 Amp bell push on independent board complete all as specified and directed.

All as per item No 62 here in before but for one 5 pin 5 Amp socket outlet point on independent board complete all as specified and directed.

All as per item No 62 here in before but for one 5 pin 5 Amp socket outlet point on the same board complete all as specified and directed.

All as per item No 62 here in before but using with 2.5 Sqmm copper conductor cables multistranded (FRLSH) PVC insulated , unsheated cable and including 2.5 Sqmm copper conductor cable multistranded(FRLSH) PVC insulated and unsheated cable as earth continuity wire and connecting to common earth dolly for one 6 pin 15 Amp socket outlet point on independent board complete all as specified and directed.

S&F electric bell, AC 230 Volt single pole complete all as specified and as directed. Make: Anchor Cat Part No. 38921or equivalent make from the approved list of manufactures.

S&F ceiling rose surface Bakelite 65 x 50 mm, 3 terminals complete all as specified and as directed. Make: Anchor Model 39040 or equivalent make from the approved list of manufactures.

S&F 5 Amps, switch single pole in 1 modular type complete all as specified and directed. Make: Anchor Model 14301 or equivalent make from the approved list of manufactures.

S&F 15 Amps switch single pole 1 modular type complete all as specified and directed. Make: Anchor Model 14301 or equivalent make from the approved list of manufactures.

S&F socket outlet multipurpose 5 and 15 Amps, 5 pin, 2 in 1 modular type complete all as specified and directed. Make: Anchor Model 14307 or equivalent make from the approved list of manufactures.

S&F bell push flush type 5 Amps single pole modular type complete all as specified and as directed. Make : Anchor Model 38091 or equivalent make from the approved list of manufactures.

S&F in repair, capacitor for ceiling fans, 230 volts, 2.5 MFD including necessary soldering complete all as specified and as directed.

S&F fan regulator electronic modular step type 100 W, 250 Volts complete all as specified and as directed. Make : Anchor Model 38284 or equivalent make from the approved list of manufactures.

S&F in repair, capacitor for any type of exhaust fan/pedestal fan/air circulator fan 230 volts AC including necessary soldering of capacity 4 MFD complete all as specified and directed.

S&F in repair lamp holder, PVC /poly carbonate type with back plate suitable for batten fittings, complete all as specified and directed

M&L in repair sub main wiring on wall/ceiling with 4 runs of 10sqmm single core PVC cable as per IS 694-1990(third revision) insulated unsheathed multistranded copper conductor FRLSH cable 1100 Volts grade drawn through and including PVC casing & capping with all accessories such as Tees, elbows, junction box etc.as required of not less than 20 mm dia and 1 run of 10 Sqmm single core PVC insulated unsheathed 1100 Volts grade, multistranded copper conductor FRLSH cable as earth continuity conductor and connecting to existing earth dolly with suitable size thimble and making good the disturbed surface to match with the existing finish complete all as specified and as directed. Note : 5 runs of 10 Sqmm cable and one run of PVC casing and capping with accessories shall be measured as one unit.

All as per item No 78 here-in-before but 2 runs of 4 sqmm single core FRLSH copper conductor and 1 run of 4 sqmm conductor for earthing complete all as specified and directed. Note:- Three run of cable and one run of PVC casing and caping shall be measured as one unit

All as per item No 78 here-in-before but 2 runs of 6 sqmm single core FRLSH copper conductor and 1 run of 4 sqmm conductor for earthing complete all as specified and directed. Note:- Three run of cable and one run of PVC casing and caping shall be measured as one unit

S&F 20 Amps metal clad plug and socket for AC/ Geyser with necessary fittings and fixtures complete all as specified and as directed. Make: Indoasian Cat Part No. 810386 or equivalent make from the approved list of manufactures.

S&F 32 Amps metal clad plug and socket for AC/ Geyser with necessary fittings and fixtures complete all as specified and as directed. Make Indoasian Cat Part No. 810388 or equivalent make from the approved list of manufactures.

S&F in repair, SPN Enclosure with two pin and earth plug and socket complete with one SP MCB, 20 Amps having breaking capacity 10 kA, complete all as specified and directed. Make: Indoasian Cat Part No 810556I or equivalent make from the approved list of manufactures.

S&F in repair, SPN Enclosure with two pin and earth plug and socket complete with one SP MCB, 32 Amps having breaking capacity 10 kA, complete all as specified and directed. Make Indoasian Cat Part No 810557I or equivalent make from the approved list of manufactures.

S&F in repair Sheet Metal Enclosure for MCB DB, TPN, 4 ways, double door, with 200 Amps rated bus bar, having IP-43 protection complete all as specified and as directed. Make Legrand Cat Part No. 5076 70 or equivalent make from the approved list of manufactures.

S&F in repair Sheet Metal Enclosure for MCB DB, TPN, 8 ways, double door, with 200 Amps rated bus bar, having IP-43 protection including taking down old DB complete all as specified. Make : Legrand Cat Part No. 5076 72 or equivalent make from the approved list of manufactures.

S&F in repair Sheet Metal Enclosure for MCB DB, TPN, 12 ways, double door, with 200 Amps rated bus bar, having IP-43 protection including taking down old DB complete all as specified and as directed. Make : Legrand Cat Part No. 5076 73 or equivalent make from the approved list of manufactures.

S&F in repair Sheet Metal Enclosure for MCB DB, SPN, 8 ways, double door, with 200 Amps rated bus bar, having IP-43 protection including taking down old DB complete all as specified. Make: Legrand Cat Part No. 5076 11 or equivalent make from the approved list of manufactures.

S&F in repair Sheet Metal Enclosure for MCB DB, SPN, 12 ways, double door, with 200 Amps rated bus bar, having IP-43 protection including taking down old DB complete all as specified and as directed. Make: Legrand Cat Part No. 5076 12 or equivalent make from the approved list of manufactures.

S&F in repair , MCB, TPN, 63 Amps, 415 Volt, b curve, having breaking capacity 10 kA complete all as specified and as directed. Make: Legrand Cat Part No. 4086 83 or equivalent make from the approved list of manufactures.

S&F in repair , MCB, TPN, 32 Amps, 415 Volt, b curve, having breaking capacity 10 kA complete all as specified and as directed. Make: Legrand Cat Part No. 4086 80 or equivalent make from the approved list of manufactures.

S&F in repair MCB, SPN, 63 Amps, 415 Volt, b curve, having breaking capacity 10 kA complete all as specified and as directed. Make: Legrand Cat Part No. 4086 20 or equivalent make from the approved list of manufactures.

S&F in repair MCB, SP, 6-32 Amps, 240 Volt, b curve, having breaking capacity 10 KA complete all as specified and as directed. Make: Legrand Cat Part No. 4085 87 to 4085 95 or equivalent make from the approved list of manufactures.

S&F in repair MCB, SPN, 6-32 Amps, 240 Volt, b curve, having breaking capacity 10 kA complete all as specified and as directed. Make: Legrand Cat Part No. 4086 17 or equivalent make from the approved list of manufactures.

S&F in repair 20 watt LED tube with double side batten fitting,universal type , 230V,50 Hz,wall surface ,roof surface including connected accessories including provision of flexible copper wire from ceiling rose to light fitting terminal complete all as specified and directed. Make:- Cat part no - REGALBATTENT8UPTO1X22WSSBSWH (Batten) of Havells or equivalent make from the approved list of manufactures.

S&F in repair LED glass T8 tube 20 watt, 220 volt ,50 Hz, LED tube rod, double side connection, inbuilt driver complete all as specified and as directed. Make:- Cat part no -CRYSTAL1213T8DSTL20WLED865SGLASS of havells or equivalent make from the approved list of manufactures.

S&F in repair LED light fitting 20 W, high performance batten , 220 volt ,50 Hz,6000 k surface mounted high quality extruded polycarbonate ,environmental friendly ,energy efficient , with all connecting accessories ,with suitable connection complete all as specified. Make:- cat part no- LUMILINEBS20WLED865SPCWH of havells or equivalent make from the approved list of manufactures.

S&F in repair LED light fitting 10 W, high performance batten , 220 volt ,50 Hz, surface mounted high quality aluminium extruded with all connecting accessories ,with suitable connection complete all as specified. Make:- cat part no-LUMILINEBS10WLED865SPCWH of Havells or equivalent make from the approved list of manufactures.

S&F in repair indoor wall mounted light 12 watt ,140 volt to 265 volts,IP-20 ,50 Hz ,aluminium housing with all accessories and connection to the electric circuit complete all as specified and directed Make:- cat part no -LWL105 of Luker or equivalent make from the approved list of manufactures.

S&F in repair mirror light 18 watt 50 hz,230 volts with all accessories and connection to the electric circuit. complete all as specified and directed Make:- cat part no - LMCL18 of Luker or equivalent make from the approved list of manufactures.

S&F in repair integral LED Aviation light 10W comprising of aluminium housing with polycarbonate enclosure complete all as specified and directed

S&F in repair circular highbay LED light 80 Watt , 240 volt , min lumens 110 Lm/w, IP 66 including provision of flexible copper wire from ceiling rose to light fitting terminal complete all as specified and directed. Make:- Cat part no -LHB11-80-CDL/60-M of Crompton or equivalent make from the approved list of manufactures.

S&F in repair LED Flood Light 50 Watt,50 Hz,220 volts having IP-66 protection, pressure die cast aluminium housing, high luminous efficiency and high power ,with driver complete all as specified and directed Make:- Cat part no-LFL-50-CDL/60-M of Crompton or equivalent make from the approved list of manufactures.

S&F in repair LED building security light 35 watts ,50 Hz,220 volts having IP-65 protection, pressure die cast aluminium housing, high luminous efficiency and high power complete all as specified and directed Make:- Cat part no. ENDURASUNDOWNSL35WLED765PASYBOPC of Havells or equivalent make from the approved list of manufactures.

S&F in repair Nickel plated mild steel clamps, Nuts, Bolts, Washers and split pin suitable for ceiling fans any type, any make, any size complete all as specified and directed

S&F in repair down rod, suitably threaded and holed, made out of 15 mm dia GI tubes, duly painted, 2' long, suitable for ceiling fans any type, any make, any size complete all as specified and directed

S&F in repair down rod, suitably threaded and holed, made out of 15 mm dia GI tubes, duly painted, 3' long, suitable for ceiling fans any type, any make, any size complete all as specified and directed

S&F in repair down rod, suitably threaded and holed, made out of 15 mm dia GI tubes, duly painted, 5' long, suitable for ceiling fans any type, any make, any size complete all as specified and directed

S&F in repair copper conductor multi stranded cable flexible 03 core PVC insulated of size 40/0.076 at site/MES store yard complete all as specified and directed.

S&F in repair fan canopy with tightening screw/check nut, made out of PVC, suitable for ceiling fans any type, any make, any size complete all as specified and directed

S&F in repair Rubber reel insulator, suitable for ceiling fans any type, any make, any size complete all as specified and directed

M&L in repair for hanging hook for ceiling fan with nuts bolts and washer min thickness 5 mm complete all as specified and directed

Taking down unserviceable ceiling fan of 1200mm/1400mm sweep, cutting out the existing burnt out fan motor winding, cleaning the motor slots, rewinding the motor with insulated copper winding wire of existing gauge, baking / heating up the motor to achieve the proper insulation resistance and re-hanging / refixing after repair including applying a coat of synthetic enamel paint (Glossy Finish) with spray gun, marking MES No. complete all as specified and as directed.

All as per item No 113 here-in-before but exhaust fan of 450/300/250 mm sweep complete all as specified and as directed.

All as per item No 113 here-in-before above but industrial air circulator fans of any sizes complete all as specified and directed.

M&L in repair earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level, connected to galvanized iron wire 4 mm dia as earth up to 7.5 m distance and connected by means of bolts, nuts, checknuts and washers of galvanised iron or steel all shown in electric plate No. 3 of SSR Part-I connected to earthing test point all as specified or indicated including provision of necessary excavation and earth work in any type of soil, PCC pit , RCC cover 50 mm thick, reinforced with 8 mm dia TMT bars both ways @ 10mm c/c , 20 mm bore medium grade watering pipe, water funnel, 15 mm bore GI light grade protection pipe, common salt, charcoal dust, returning, filling in of soil, removal of spoil to a distance not exceeding 50 mtr etc including testing on completion complete all as specified. Note :- (i) The unit rate includes for protection pipe and earth lead upto 7.50 Mtr. (ii) Earth lead beyond 7.50 Mtr length shall be measured and paid separately.

M&L in repair earthing complete with galvanised steel earth plate electrode 60 x 60cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth strip 25 x 4 mm as earthing lead by means of bolts nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. point 3 connected to earthing test point all as specified or indicated including testing on completion including provision of necessary excavation and earth work in any type of soil, PCC pit , RCC cover 50 mm thick, reinforced with 8 mm dia TMT bars both ways @ 10mm c/c , 20 mm bore medium grade watering pipe, water funnel, 40 mm bore GI light grade protection pipe, common salt, charcoal dust, returning, filling in of soil, removal of spoil to a distance not exceeding 50 mtr etc including testing on completion complete all as specified. Note :- (i) The unit rate includes for protection pipe and earth lead upto 7.50 Mtr. (ii) Earth lead beyond 7.50 Mtr length shall be measured and paid separately.

S&F in repair Modular Bell push 6A, 1module, complete all as specified and directed.

S&F in repair in repair Fan Regulator, modular electronic rotary, 0-4 steps step type 100 Watt, 240 Volt 50 Hz hum free 2 module complete all as specified and directed.

S&F in repair switch modular 6 Amps 240 Volts one way switch complete all as specified and directed.

S&F in repair Socket 6 Amps AC 240 Volts 2/3 pin combined 2 modular type complete all as specified and directed.

S&F in repair Socket 6A/16 Amps-2/3 pin combined AC 240 Volts modular type complete all as specified and directed.

S&F in repair Switch modular type AC 240 volts 16 Amps one way complete all as specified and directed.

S&F in repair XLPE insulated, galvanised steel strip or wire armoured heavy duty electric cable with stranded aluminium conductor, 1100 volts grade, cross-sectional area 6 sqmm 2 core including taking down old unserviceable cable complete all as specified and directed.

S&F in repair XLPE insulated, galvanised steel strip or wire armoured heavy duty electric cable with stranded aluminium conductor, 1100 volts grade, cross-sectional area 10 sqmm 4 core including taking down old unserviceable cable complete all as specified and directed.

S&F in repair electric bell, AC 230 Volt single pole complete all as specified and as directed. Make: Anchor Cat Part No. 38921or equivalent make from the approved list of manufactures.

S&F XLPE insulated, galvanised steel strip or wire armoured heavy duty electric cable with stranded aluminium conductor, 1100 volts grade, cross-sectional area 16 sqmm 4 core including taking down old unserviceable cable complete all as specified and directed.

Labour only for attending urgent nature of electrical complaints (within 3 hrs from intimation) like checking of existing electrical items for continuous electric supply including carrying out minor repairs such as checking of voltage calibration, checking of variation of R Y B phase in LT panel/DBs ,changing of MCBs, small pieces of wires including connections etc carrying out repairs such as tightening of loosen electric connections, nuts, bolts, screws of switches, sockets, switch boards, making joints and covering with PVC tape, minor repairs to ceiling fans / exhaust fans like repair of capacitors, cleaning and oiling etc. as required to make the electrical items/ appliances fully functional at 'A' & 'B' area at Naval Base during off hours (1700 hrs evening to 0900 Hrs morning ) on all working days all as specified and directed by Engineer-in-Charge.

Labour only for attending urgent nature of electrical complaints (within 3 hrs from intimation) like checking of existing electrical items for continuous electric supply including carrying out minor repairs such as changing of MCBs, small pieces of wires including connections etc carrying out repairs such as tightening of loosen electric connections, nuts, bolts, screws of switches, sockets, switch boards, making joints and covering with PVC tape, minor repairs to ceiling fans / exhaust fans like replacement of capacitors, cleaning and oiling etc. as required to make the electrical items/ appliances fully functional at 'B' area at Naval base during off days including sunday and holiday days all as specified and directed by Engineer-in-Charge.

NOTE for item no. 128&129- (i) The material and labour cost required for taking down existing fitting / fixture and fixing of new item shall be measured and paid separately under relevant item. Additional labour charge required for immediate attendance of complaint only shall be quoted under this item. (ii)The technician employed by the contractor shall available on all working days. The quoted rate shall inclusive of all labour, transportation of material and tools. (iii) The contractor shall display contact number of technicians in 'B area at Naval Base to register users complaint. (iv) A penal recovery of Rs. 800/hour/complaint shall be effected on contractor beyond 3 hrs. A register shall be maintained by contractor duly countersigned by Concerned JE & AGE with time of occurrence of defect and time of rectification and submitted for claiming payment.. (v) Number of complaints may vary day to day and shall be on required basis. Contractor shall quote their rates accordingly including all aspects like labours ,tool, transportation etc. (vi) The contractor should display contact number at complaint cell to register users complaint. vii) Number of complaints may vary day to day and shall be on required basis. Contractor shall quote their rates accordingly. Including in all aspects like labours,tool,transportation etc.

M&L for checking of ceiling fan stability / tightness with fan hook for complete Satellite area as directed and make good, re-tightening of split pin / nut, bolt etc, ,loose connection in distribution boards, MCBs in quarters all as per site requirement complete all as specified and as directed. Note:- (i) The cost of accessories like split pin, nuts, bolts, washers etc if any required shall be included in the quoted rate. The quoted rate shall inclusive of all labour and plants like ladder etc complete. (ii) The contractor shall maintain a register showing the location of fan duly signed by the users for the service carried out. This register shall be produced while claiming payment. (iii) The checking of fans shall be carried out once in 6 months. (iv) Checking of all fans and DBs in a qtr at a time shall be considered as one job

M&L for checking of ceiling fans stability (like fan hooks,nuts, bolts ,hanging rod ,canopy ,washer etc ) exhaust fan stability ,loose connection in distribution boards, MCBs in 'B' Area at Naval base all as specified and directed by engineer in charge Note - (i) The cost of accessories like split pin, nuts, bolts, washers etc if any required shall be included in the quoted rate. The quoted rate shall inclusive of all labour and plants like ladder etc complete. (ii) The contractor should prepared a register and enter office name with signature of office in charge and submitted to engineer in charge for verification. (iii) Checking of 7 fans and 2 DBs of any type at a time is shall be considered as one job

M&L for checking of faulty / jumped energy meter (three phase /single phase ) by fixing new energy meter supplied by department in series with existing meter and submit meter reading report of both energy meter after one week to find out the fault in meter if any to the in engr-in -charge complete all as specified and directed.

M&L in repair aluminium strip 25 x 3.15 mm with porcelain insulators, saddles and fixing screws etc for roof conductor and down conductor above ground all as specified and directed.

M&L in repair 20 X 3.15 mm Copper strip with saddles and screws etc complete all as specified and directed .

M&L in repair air termination single pointed aluminium rod 12mm dia and 300mm long all as specified and directed.

M&L for test point terminal block made of gunmetal of size 75x75x25mm drilled and screened including all fixing arrangements with hexagonal headed screws and taking down old ones complete all as specified and directed.

M&L for checking of earthing resistance and E-N voltage with calibrated earth tester meter and multimeter including recharging of conventional earthing of lightening arrestor of building /workshop/hanger /OTM etc at Naval Base Kochi complete with chemical, maintaining the earth testing record, rectification of earthing related fault all as directed by Engineer in charge. Note:- A record for checking and recharging shall be maintained duly signed by user and JE E/M .

M&L in repair galvanised steel strip 32mmx6mm complete with, protection sleeves, saddles,seprator and fixing screws at surrounding inside and outside the bldg complete all as specified and as directed.

M&L in repair galvanised steel strip 25mmx4mm complete with, protection sleeves, saddles,seprator and fixing screws at surrounding inside and outside the bldg. complete all as specified and as directed.

M&L in repair of earthing chamber of any type any size with necessary pack work required with smooth surface duly coloured after repair work and cover of the size of the earth pit complete all as specified and directed.

S&F in repair 4mm dia galvanised iron or steel wire buried in ground fixed on walls and connected to main earth strip including excavation and earth work ,refilling etc. compete all as specified and as directed.

S&F in repair for rigid non metallic PVC medium grade conduit including junction boxes, tee, bends, elbows, reducers bell mouth tube ends, fixing accessories such as couplers, lock Nuts, saddle pipe hook etc for 25 mm dia. ISI Marked complete all as specified and directed.

S&F in repair for rigid non metallic PVC medium grade conduit including junction boxes, tee, bends, elbows, reducers bell mouth tube ends, fixing accessories such as couplers, lock Nuts, saddle pipe hook etc for 32 mm dia. ISI Marked complete all as specified and directed.

S&F in repair MCCB 3/4 Pole, 415 V, adjustable type, 25 to 100 Amps with breaking capacity 16 KA complete all as specified and directed. Make: Legrand Cat Part No. 4200 45 or equivalent make from the approved list of manufactures.

S&F in repair MCCB 3 Pole, 415 V, adjustable type, 125 Amps with breaking capacity 16 KA complete all as specified and directed. Make: Legrand Cat Part No. 4200 46 or equivalent make from the approved list of manufactures.

S&F in repair MCCB 3 Pole, 415 V, Adjustable type, 160 Amps with breaking capacity 36 KA all as specified and directed. Make: Legrand Cat Part No. 4200 47 or equivalent make from the approved list of manufactures.

S&F in repair MCCBs FP 200 Amps thermal magnetic 25 kA complete all as specified and directed. Make: Legrand Cat Part No. 4202 48 or equivalent make from the approved list of manufactures.

S&F in repair pvc ventilation fan high speed 250 mm ,pic body ,dust protection ,50 watt ,speed 2370 Rpm, Air delivery 460 cum/Min ,light weight including suitable connection from ceiling rose all as specified and directed . Make:- Cat part no -Brisk air 10 inch of Crompton or equivalent make from the approved list of manufactures.

S&F in repair pvc ventilation fan high speed 200 mm ,pic body ,dust protection ,50 watt ,speed 2370 Rpm ,Air delivery 460 cum/Min ,light weight including suitable connection from ceiling rose all as specified and directed . Make:- cat part no -Brisk air 8 inch of Crompton or equivalent make from the approved list of manufactures.

S&F in repair metallic ventilation fan high speed 300 mm ,metallic body , 70 watt ,speed 1380 Rpm , Air delivery 1600 cum/Min , 220-240 volts , 50 Hz , including suitable connection from ceiling rose all as specified and directed . Make:- Cat part no -Trans air 12 inch of Crompton or equivalent make from the approved list of manufactures.

S&F in repair ceiling fan 1200 mm sweep ,white colour ,50 watt,,220-240 volts ,50 Hz ,ISI marked including suitable connection from ceiling rose all as specified and directed . Make:- Cat part no Energjon HS-5 star BLDC of Crompton or equivalent make from the approved list of manufactures.

S&F in repair on wall/ concealed on wall, 40mm dia high pressure CPVC pipes SDR-13.5 & Plain CPVC SDR 11 fittings including all necessary fittings, solvents, complete all as specified and directed.

S&F in repair, on wall/ concealed on wall, 25mm dia. High pressure CPVC pipes SDR-13.5 & Plain CPVC SDR 11 fittings including all necessary fittings, solvents, complete all as specified and directed.

S&F in repair on wall/ concealed on wall, 20mm dia. High pressure CPVC pipes SDR-13.5 & Plain CPVC SDR 11 fittings including all necessary fittings, solvents, complete all as specified and directed.

S&F in repair, 15mm size Chromium Plated fancy type Bib Taps, quarter turn with flange and aerator, short body, cast copper alloy with crutch or butterfly handle, screwed for GI/ CPVC pipe, complete all as specified and as directed. Make : Cera Cat. Part No. F1020151 or equivalent make from the approved list of manufactures.

S&F in repair, 15mm size Chromium Plated fancy type Bib Taps, quarter turn with flange and aerator, long body, cast copper alloy with crutch or butterfly handle, screwed for GI/ CPVC pipe, complete all as specified and as directed. Make : CERA Cat. Part No. F2008152 or equivalent make from the approved list of manufactures.

S&F in repair, 15mm size Chromium Plated cast copper alloy Bib Cock, short body with flange and nozzle for garden/ washing machine, complete all as specified and as directed. Make : CERA Model No. F2002153 or equivalent make from the approved list of manufactures.

S&F in repair, 15mm size Chromium Plated cast copper alloy Angle Valve, half turn with flange, for fixing with CPVC pipe, complete all as specified and as directed. Make : CERA Model No. F1018201 or equivalent make from the approved list of manufactures.

S&F in repair, 15mm size Swivel Overhead Shower (minimum weight 40 grams) of PTMT, any colour with shower arm (minimum weight 40 grams) 195mm long with bend of 45 degree with flange, fixing with CPVC Pipe, complete all as specified and as directed. Make : CERA Model No. F7020108AB or equivalent make from the approved list of manufactures.

S&F in repair, 450mm long, 15mm dia. PVC Connection with brass union on both sides to suit 15mm GI pipe, complete all as specified and directed. Make: Cera Model F8070402 or equivalent make from the approved list of manufactures.

S&F in repair, Health Faucet, ABS body with wall hook and one metre SS braided rubber hose pipe, complete all as per specified and directed. Make: CERA Model No. F8030108AB oor equivalent make from the approved list of manufactures.

S&F in repair, 90mm dia. hand shower with 125 mm long arms, S&F in repair Make : CERA Model No. F7030105AB or equivalent make from the approved list of manufactures.

S&F in repair, 15mm bore Chromium Plated fancy type, cast copper alloy Pillar Taps, quarter turn with aerator, with capstan heads, screwed down, high pressure with or without lettered 'Hot' or 'Cold', with long screwed shanks and fly nuts screwed for iron pipe and fixed, complete all as specified and directed. Make : CERA Model No. F2002101 or equivalent make from the approved list of manufactures.

S&F in repairs, Wall Mixer (3-in-1) with arrangement of both Telephonic Shower and Over Head Shower, with 210mm long bend pipe, complete all as specified and as directed. Make : CERA Model No. F1015403 or equivalent make from the approved list of manufactures.

S&F in repair, Chromium Plated cast copper alloy Kitchen Sink Cock, quarter turn, wall mounted with swivel spout not less than 150 mm and wall flange complete all as specified and as directed. Make : Model No. F2002261 of CERA or equivalent make from the approved list of manufactures.

M&L for cutting chases on walls, floors etc. not exceeding 10cm girth and making good the disturbed surface to match with the existing surface after removing the existing concealed pipe/ laying new pipe, complete all as specified and directed.

S&F in repairs, 40mm dia. CPVC Ball Valve suitable for CPVC pipe including necessary fittings, complete all as specified and directed.

S&F in repairs, 25mm dia. CPVC Ball Valve suitable for CPVC pipe including necessary fittings, complete all as specified and directed.

S&F in repairs, 20mm dia. CPVC Ball Valve suitable for CPVC pipe including necessary fittings, complete all as specified and directed.

S&F in repairs, 50 mm dia. Synthetic (PVC) Float Valve, high pressure, with polythene ball of size 6" dia. and flynut, complete all as specified and directed. Make: Prayag Cat Part No. 155 or equivalent make from the approved list of manufactures.

Material, labour, transport and tools for rectification of urgent nature Water Supply complaints like Pipe breakdown, Air problem etc. at Naval Base as and when required (Kataribagh & Ashoka bldg) as and when required during all working days, Sundays/ Holidays/ Off hours of all working days, all as directed. NOTE: (i) The material incorporated for completion of work will be measured and paid separately under relevant item. (ii) The contractor should display contact number at 'B' area of Naval Base, to register users complaint. (iii)The recovery of Rs. 1000/- per complaint will be chargeable if contractor fails to attend complaint.

Taking down defective Geyser of 25/ 15/10 litres capacity from its existing position at any height duly disconnecting inlet/ outlet water connection and opening up geyser for checking defective parts and replacing the defective parts with new parts, including testing and commissioning the same after successful repairing, complete including refixing the same on its existing position and making connection inlet/ outlet water connection, complete all as specified and directed. Note : The spares required for servicing the geyser shall be measured and paid separately under relevant item of the schedule as 'supply only'. The labour required for replacing spares shall include in this item.

Supply only Thermostat suitable for 25/15/10 litres capacity Geyser, any make/ type, complete all as specified and directed.

Supply only Heating Element 1.5 KW/ 2 KW, ISI marked for 25/15/10 litres capacity Geyser, any make/ type complete all as specified and directed.

Supply only Gasket for 25/15/10 50 litres capacity Geyser, complete all as specified and directed.

Supply only 12mm dia. Chromium Plated Pipe for 'Hot and Cold' water, of suitable length, with two brass adopter and connecting up, complete all as specified and directed.

Supply only Indicating Lamp suitable for 25/15/10 50 litres capacity Geyser, complete all as specified and directed.

M&L for scrubbing, cleaning thoroughly for removing the dirts, sediments, silts etc from the internal surfaces of RCC over head tanks (bottom & wall) of capacity 1000 to 2000 litres by using brushes and bleaching powder and other cleaning materials as required and applying two coats of lime wash inside the wall surface of the tanks including writing the words "TANK CAPACITY AND DATE OF CLEANING" in capital letters of suitable size on outside visible place of Overhead tank with synthetic enamel white paint over black back ground at "B" area of Naval Base complete all as directed. Note for item No. 34 to 38:- After cleaning the tank all the dirt from pipe/all type of tap / valve and air from pipe line shall be removed to the satisfaction of Engineer in charge.

All as per item No. 179 here-in-above, but 5000 litres capacity tank complete all as directed.

M&L for cleaning all types of taps including removing air from pipeline and some connected issues, checking water pressure in each bathroom and kitchen, complete all as specified and directed by Engineer in Charge.

M&L for replacing all types of Spindle with washer of taps (Short body/ Long body tap, Angle Valve, Washing machine tap, Sink Cock etc.) including taking down, cleaning of tap and refixing after repair, complete all as specified and directed by Engineer in Charge.

M&L for replacing all types of Spindle with washer of wall mixer taps (Short body/ Long body tap, Angle Valve, Washing machine tap, Sink Cock etc.) including taking down, cleaning of tap and refixing after repair, complete all as specified and directed.

S&F in repairs 25 litre capacity Electric Water Heater, Storage type, steel body with copper inner tank and heating element upto 2 KW, BEE 5 Star rated, with all accessories such as safety valve, thermostat, NRV, connection piece etc., including depositing the old one to AGE(E/M) store yard complete all as specified and as directed. Make: Vguard Model SPRINHOT PLUS or equivalent make from the approved list of manufactures.

Classic Builders (BID ID -3411317)

SAGA ENGINEERS (BID ID -3411192)

S A ENTERPRISES (BID ID -3411391)

K A ANTONY & SONS (BID ID -3411199)

LAKSHMI BUILDERS (BID ID -3411536)

N.O. Antony Contractors (BID ID -3411568)

S&C ENTERPRISES (BID ID -3411305)