BID DOCUMENTS FOR CONSTRUCTION WORK OF C.C. ROAD, R.C.C NP3 PIPE LINE AND LED STREET LIGHT POLE WITH ALL ACCESSORIES IN VARIOUS AREA AT ZALOD NAGARPALIKA UNDER: 15TH FINANCE SCHEME (UNTIED) GRANT. (PACKAGE:07).

9 ESTIMATE FOR PROVIDING AND LAYING OF 300MM DIA R.C.C. NP3 PIPE DRAIN AT Rs.

PUSHPA KUNJ SOCIETY BHAG 1 AT ZALOD.

10 ESTIMATE FOR CONSTRUCTION WORK OF C. C. ROAD AT PUSHPA KUNJ SOCIETY Rs.

BHAG 2 AT ZALOD (WARD 3).

11 ESTIMATE FOR CONSTRUCTION WORK OF C. C. ROAD AT BHARATBHAI DEVDA'S Rs.

HOUSE TO KAMLESHBHAI DEVDA'S HOUSE IN SARVODAY SOCIETY (WARD 3).

I/ We agree to carry out the above Work at ___________________________________% above/below the estimated rate.

(In Words) ______________________________________Percentage above/below the estimated Rate

Estimated Amount Put to Tender Rs.

% Above / Below _____________ %

Net Amount Rs. ________________

I/ We have read the conditions mentioned in this tender and agree to abide by the same

SECTION-7 BILL OF QUANTITIES-191

Seal & Signature of Contractor

President Chief Officer

Zalod Nagarpalika

Devgadh Baria Municipality, Zalod Nagarpalika

SECTION-7 BILL OF QUANTITIES-192

ZALOD MUNICIPALITY, ZALOD

ESTIMATE FOR PROVIDING, SUPPLYING & ERECTING OF LED STREET LIGHT POLE WITH ALL ACCESSORIES

FROM ANGANVADI TO PRIMARY SCHOOL AT ZALOD ( WARD 1 )

Sr. Quantity Discription Total Unit Amount

1 Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured

copper cable 1.1 KV grade to be erected as directed of

following size.

120.00 (E) 3 Core 2.5 sq. mm 136.35 Mtr.

2 1.00 Supplying & erecting following spare parts for panel

Ea. mounting Switch Disconnector Fuse Units. Operational

Handle Assembly Complete for (i) 32/63/125 Amps.

3 1.00 Supplying and erecting triple pole & neutral 440V / 500V

Rmt. panel mounting Copper Busbars with four equal Nos. of

electrolyte bus having current density not more than

Amp. / sq.mm (Rated current / cross section area) duly

wrapped with colour insulating tape for phase sequence of

following current carrying capacity, erected with necessary

bus bar supports /insulators, main cable socket to each

bar, erected in existing cubical panel with necessary

connections. (A) Suitable for 100 Amp. Capacity.

4 1.00 Supplying & erecting following spare parts for panel

Ea. mounting Switch Disconnector Fuse Units. Neutral Link for

5 1.00 Supplying and erecting approved make 415V bakelite fuse

Ea. fittings for front connection / busbar type to accommodate

HRC fuse link, with spin - riveted brass contact, having

thermo plastic inflammable material & single piece

extruded brass box contact to lock with adequate cable

hole to accommodate aluminium conductors suitable for

(without HRC fuse). For 63 Amp.

6 1.00 Supplying and erecting Ammeter / Voltmeter selector

Ea. switch for 3 phase AC Supply 500 V on existing panel

board with necessary connections. 317.14 Ea.

SBD SECTION-7 BILL OF QUANTITIES-192

7 1.00 Supplying and erecting approved make suitable panel

Ea. indicator LED type lamp, lens cover, complete erected with

necessary connections. 43.43 Ea.

8 1.00 Providing & erecting Spares For Air Circuit Breakers as

Ea. follows: (B) Auxiliary Contact Block for CN-CS 800 to

9 Mains with ISI marked, 1.5KV grade electrolyte multi

stranded, annealed copper conductor with heat resistant

PVC insulated conforms to IS 694, IEC - 227 erected in

existing pipe of following size (Specifically for control

panel, relays, power switchgears, motor starters & control

wiring) with required size of copper lugs, nuts and bolts if

75.00 For Control Cable.(c) One wire 2.50 sq. mm 26.26 Mtr.

10 Mains with ISI marked, 1.5KV grade electrolyte multi

stranded, annealed copper conductor with heat resistant

PVC insulated conforms to IS 694, IEC - 227 erected in

existing pipe of following size (Specifically for control

panel, relays, power switchgears, motor starters & control

wiring) with required size of copper lugs, nuts and bolts if

75.00 For Power Cable. (d) One wire 4.00 sq. mm 35.35 Mtr.

11 50.00 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured

Mtr. cable multistrand Aluminium conductor for 1.1 KV. to be

laid on wall with necessary clamps or in existing trench /

pipe of following size of cables.(e) 4 core 25 Sq. mm

12 1.00 Providing and erecting Approved make Four pole moulded

Ea. case circuit breaker having breaking capacity ICU of

KA. at 415 V,having normal current rating up to 25 A to

100A. with Fixed thermal & magnetic release suitable to

work on A.C. supply 50 c/s. with all internal connections,

spreader tinned copper & complete erected in existing

16 G.M.S. housing. Cat.III. ICS=100% of ICU only.

13 Providing and erecting Approved make RCCBs

conforming to IS: 12640 and having sensitivity of 30 mA

and Short Circuit withstand capacity of 10 KA and suitable

for operation on 3 phase and neutral 415V,50Hz. having

characteristic of quick action & tripping with all advance

feature & do not incorporate any electronic component for

following Max. Rating erected as directed.

1.00 (iii) 63 Amps. FP Cat.III 3040.10 Ea.

SBD SECTION-7 BILL OF QUANTITIES-193

14 15.00 Providing and erecting Miniature circuit breaker single pole

Ea. 6A to 25A suitable to operate on 240 V A.C. system and

having breaking capacity 10 KA to be erected in existing

box. confirming to IS 8828/1996 with ISI Mark. Cat III

15 5.00 Providing and erecting Annealed bare Copper wire 8 to

16 15.00 Providing and erecting Pipe type earthing having

Ea. cms.long and 2.5 cms. dia. galvanised iron pipe with

coupling and buch buried in specially prepared earth pit

complete with necessary 8 SWG earth wire.

17 Supplying & erecting funnel type earthing having earth

plate of following size burred in specifically prepared earth

pit 3 mtr. below ground with 40 kg. charcoal and salt with

alternate layers of charcoal & salt, 20mm. dia. G.I. pipe

with Funnel with a wire mesh for watering & bricks

masonry block, C.I. Cover complete as per para 7.3 of IS

3043 with necessary length of double Galvanised Iron /

copper earth wire No 6 SWG bolted with lug to the plate

and covered in 12 mm dia. G.I. pipe 2.5 mtr long complete

connected to the nearest switch gear with end socket as

per direction & duly tested by earth tester confirming to IS

(As per drawing) with following specification.

1.00 (C) with 60 x 60 x 0.315 cms. Copper earth plate 7874.97 Ea.

18 1.00 For using salt and charcoal/coke as required for pipe type 171.70 Ea.

19 Providing and erecting XLPE (IS:7098) (I)-88 ISI armoured

cable multistrand /Solid Aluminium conductor for 1.1 KV.

To be laid on wall with necessary clamps or in existing

trench/pipe of following size of cables

300.00 (C) 4 core 10 Sq. mm 138.37 Mtr.

20 Providing and erecting XLPE (IS:7098) (I)-88 ISI armoured

cable multistrand Aluminium conductor for 1.1 KV. to be

laid on wall with necessary clamps or in existing trench /

pipe of following size of cables

37.50 (C) 4 core 16 Sq. mm 151.50 Mtr.

21 300.00 Providing & laying approved make Double walled

Mtr. corrugated pipes (DWC) of polyethylene (conforming to IS

14930 II) with necessary connecting accessories of same

material at required depth in existing trench for laying of

cable. below ground / road surface for enclosing cable. (C)

50 mm Dia 62.62 Mtr.

SBD SECTION-7 BILL OF QUANTITIES-194

22 Supplying following size of Light duty “A” Class G.I. Pipe &

erecting as directed by Engineer-in-charge.

23 Providing and fixing heavy duty flange type brass cable

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for

following size of cables.

30.00 (d) 2 to 4 core 10 Sq. mm 38.38 Ea.

24 Providing and fixing heavy duty flange type brass cable

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for

following size of cables.

2.00 (d) 2 to 4 core 16 Sq. mm 47.47 Ea.

25 Providing and, fixing heavy duty flange type brass cable

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for

following size of cables.

2.00 (d) 2 to 4 core 25 Sq. mm 51.51 Ea.

26 15.00 Supplying and erecting approved make Octagonal pole

Ea. made from HR sheet steel. The pole should be made as

per IS. and shall be coated with hot dip galvanizing as per

IS 2629/2633/4759, suitable suspend local wind speed

with integral Junction box consist of terminal plate of min

6mm Hylam sheet, standard profile 35mmX7.5mm Din-

Rail for MCB Mounting, stud type terminal and

arrangement for cable termination to be erected With

Suitable foundation (Included) as per details given by

manufacturer considering site requirement. (D) 6 Mtr. Long

70 mm Top X 135 mm bottom dia, 3 mm thickness with

200mmX200mmX12mm base plate, 4-M20 Bolts and

600mm long with necessary G.I. J Bolts .Approx Pole

27 Providing and erecting Street Light pole bracket

comprising main B Class MS pipe of 4.2 cm/require

outside dia. complete with suitable B Class M.S. sleeve

tubing of approx. 45cms.length and suitable for 76.5 mm

/80mm / required size of pole top having sufficient

fasteners for fixing the brackets and having spread of

1.5.mtr. length with 110 deg.with vertical plane & suitable

welded stays, reducer and with check nuts complete

painted with one coat of Red oxide / PU base primer and

two coats of Aluminium / PU paint. paint with following nos

SBD SECTION-7 BILL OF QUANTITIES-195

15.00 (A) Single Arm Bracket 1.5 Mtr. 626.20 Ea.

0.00 (B) Double arm Bracket 1.5 Mtr. 916.07 Ea.

28 15.00 Supplying and erecting LED street light / Flood light fittings

Ea. with High power White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more than

lm/w and corrosion free High pressure die cast aluminum

housing with smooth finish powder coated and heat sink

extruded aluminium with diffuser and Polycarbonate

optics/ lenses, with toughened glass with company

mark/name engraved or embossed 160 to 270 V,Power

Factor more than 0.95, THD < 10 %, CCT 3000 K to

5700K, Uniformity ratio >0.45, Luminaire efficacy>

lumens/watt. LED driver efficiency > 85 %.( fittings

required LM-79 & LM-80 certificates) (NOTE: Below

description have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.) (A) Street

Light (IP-65), Surge protection -4KV integral and Light

must have 440VAC line supply with over-voltage

protection. (ii) above 36 to 48 Watts. Cat III

29 1.00 Supplying & erecting approved make Digital time switch

Ea. having lithium cell 6 years operative and operate battery

backup 1 channel day clock with 14 memory programme,

suitable to operate on 240V + 5%, 16A with, floating

contacts Minimum switching setup time 1 minimum & LCD

display. Also comprised permanent ON/OFF switching.

Programming switches & housed in fire proof

thermoplastic enclosure & transparent cover erected as

required with necessary connection erected as directed

30 1.00 Supplying & erecting power contactor, AC3 duty for time

Ea. switch complete erected as per direction Cat III. (B) 2 pole

SBD SECTION-7 BILL OF QUANTITIES-196

31 1.00 Supplying & erecting IP 55 grade following size section

Ea. pillar fabricated from joint less M.S. Sheet with angle iron

legs made from jointless M.S. Angle with cable clamps to

be buried in ground to have appropriate erection to work

uniform until erected with cement concrete foundation and

45 cm high bricks work finishing with plaster etc. hinged

double door internally supported on both side, with internal

and outside looking arrangement with look and keys in

duplicate 35 x 35 x 5 mm M.S. Angle of Two Nos. one is

welded and other with nut and bolt for erecting Bakelite

sheet. Painting the Section Pillar inside and out side with

three tank powder coated paint. section pillar roof should

be without joint with water leakage proof & tested as per IP

55 test & followed by IS 2147 of 1962. (B) 75 X 60 X 45 cm

section pillar fabricated from 16 Gauge MS Sheet with

angle iron legs 45 cm long made from 35 X 35 X 5 mm

thick MS angle.

32 15.00 Supplying & erecting approved make SMC press moulded

Ea. composite FRP. loop-in, loop- out approx. 2mm thick box

complete with Bakelite connector strip 5way(3P+N+E), DIN

rail for mounting mob & hinged doors as per requirement

having locking arrangements with mounting clamp with

nuts, bolts & washers suitable for erection on pole with

cable clamps& earth bolt of following size of box. (c)

150mm x 125mm x 100mm [deep].

33 300.00 Making trench in Hard Murrum / Tar Road of suitable width

Mtr. of 90 cm or required depth for laying any size of cable or

locating the fault all over the run and back filling the same

and making the surface as normal ground.

34 30.00 If additional machinery like hammer driller or JCB use

Mtr. [Add] 297.95 Mtr.

35 1.00 GEB Connection Charges 50500.00 Job.

Add :- 18% of GST, Rs.

Add :- 2% of Contingency Charges, Rs.

Add :- 1% of Qaulity Controll, Rs.

SBD SECTION-7 BILL OF QUANTITIES-197

ZALOD MUNICIPALITY, ZALOD

ESTIMATE FOR PROVIDING, SUPPLYING & ERECTING OF LED STREET LIGHT POLE WITH ALL ACCESSORIES

FROM VIJAY CHAUHAN HOUSE TO METANBHAI HOUSE AT ZALOD ( WARD 1 ).

Sr. Quantity Discription Total Unit Amount

1 Supplying & erecting XLPE(IS:7098)(I)-88 ISI

unarmoured copper cable 1.1 KV grade to be erected

as directed of following size.

200.00 (E) 3 Core 2.5 sq. mm 136.35 Mtr.

2 2.00 Supplying & erecting following spare parts for panel

Ea. mounting Switch Disconnector Fuse Units. Operational

Handle Assembly Complete for (i) 32/63/125 Amps.

3 2.00 Supplying and erecting triple pole & neutral 440V /

Rmt. 500V panel mounting Copper Busbars with four equal

Nos. of electrolyte bus having current density not more

than 1.6 Amp. / sq.mm (Rated current / cross section

area) duly wrapped with colour insulating tape for

phase sequence of following current carrying capacity,

erected with necessary bus bar supports /insulators,

main cable socket to each bar, erected in existing

cubical panel with necessary connections. (A) Suitable

for 100 Amp. Capacity. 1961.42 Rmt.

4 2.00 Supplying & erecting following spare parts for panel

Ea. mounting Switch Disconnector Fuse Units. Neutral Link

5 2.00 Supplying and erecting approved make 415V bakelite

Ea. fuse fittings for front connection / busbar type to

accommodate HRC fuse link, with spin - riveted brass

contact, having thermo plastic inflammable material &

single piece extruded brass box contact to lock with

adequate cable hole to accommodate aluminium

conductors suitable for (without HRC fuse). For

Amp. 167.66 Ea.

6 2.00 Supplying and erecting Ammeter / Voltmeter selector

Ea. switch for 3 phase AC Supply 500 V on existing panel

board with necessary connections. 317.14 Ea.

SBD SECTION-7 BILL OF QUANTITIES-198

7 2.00 Supplying and erecting approved make suitable panel

Ea. indicator LED type lamp, lens cover, complete erected

with necessary connections. 43.43 Ea.

8 2.00 Providing & erecting Spares For Air Circuit Breakers

Ea. as follows: (B) Auxiliary Contact Block for CN-CS

9 Mains with ISI marked, 1.5KV grade electrolyte multi

stranded, annealed copper conductor with heat

resistant PVC insulated conforms to IS 694, IEC -

erected in existing pipe of following size (Specifically

for control panel, relays, power switchgears, motor

starters & control wiring) with required size of copper

lugs, nuts and bolts if required.

125.00 For Control Cable.(c) One wire 2.50 sq. mm 26.26 Mtr.

10 Mains with ISI marked, 1.5KV grade electrolyte multi

stranded, annealed copper conductor with heat

resistant PVC insulated conforms to IS 694, IEC -

erected in existing pipe of following size (Specifically

for control panel, relays, power switchgears, motor

starters & control wiring) with required size of copper

lugs, nuts and bolts if required.

125.00 For Power Cable. (d) One wire 4.00 sq. mm 35.35 Mtr.

11 50.00 Providing and erecting XLPE (IS:7098)(I)-88 ISI

Mtr. armoured cable multistrand Aluminium conductor for

1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables.(e)

core 25 Sq. mm 188.87 Mtr.

12 2.00 Providing and erecting Approved make Four pole

Ea. moulded case circuit breaker having breaking capacity

ICU of 25 KA. at 415 V,having normal current rating up

to 25 A to 100A. with Fixed thermal & magnetic release

suitable to work on A.C. supply 50 c/s. with all internal

connections, spreader tinned copper & complete

erected in existing 16 G.M.S. housing. Cat.III.

ICS=100% of ICU only.

SBD SECTION-7 BILL OF QUANTITIES-199

13 Providing and erecting Approved make RCCBs

conforming to IS: 12640 and having sensitivity of

mA and Short Circuit withstand capacity of 10 KA and

suitable for operation on 3 phase and neutral

415V,50Hz. having characteristic of quick action &

tripping with all advance feature & do not incorporate

any electronic component for following Max. Rating

erected as directed.

2.00 (iii) 63 Amps. FP Cat.III 3040.10 Ea.

14 25.00 Providing and erecting Miniature circuit breaker single

Ea. pole 6A to 25A suitable to operate on 240 V A.C.

system and having breaking capacity 10 KA to be

erected in existing box. confirming to IS 8828/1996 with

ISI Mark. Cat III 112.11 Ea.

15 5.00 Providing and erecting Annealed bare Copper wire 8 to

16 25.00 Providing and erecting Pipe type earthing having

Ea. cms.long and 2.5 cms. dia. galvanised iron pipe with

coupling and buch buried in specially prepared earth pit

complete with necessary 8 SWG earth wire.

17 Supplying & erecting funnel type earthing having earth

plate of following size burred in specifically prepared

earth pit 3 mtr. below ground with 40 kg. charcoal and

salt with alternate layers of charcoal & salt, 20mm. dia.

G.I. pipe with Funnel with a wire mesh for watering &

bricks masonry block, C.I. Cover complete as per para

7.3 of IS 3043 with necessary length of double

Galvanised Iron / copper earth wire No 6 SWG bolted

with lug to the plate and covered in 12 mm dia. G.I.

pipe 2.5 mtr long complete connected to the nearest

switch gear with end socket as per direction & duly

tested by earth tester confirming to IS (As per drawing)

with following specification.

2.00 (C) with 60 x 60 x 0.315 cms. Copper earth plate 7874.97 Ea.

18 2.00 For using salt and charcoal/coke as required for pipe 171.70 Ea.

Ea. type earthing.

SBD SECTION-7 BILL OF QUANTITIES-200

19 Providing and erecting XLPE (IS:7098) (I)-88 ISI

armoured cable multistrand /Solid Aluminium conductor

for 1.1 KV. To be laid on wall with necessary clamps or

in existing trench/pipe of following size of cables

500.00 (C) 4 core 10 Sq. mm 138.37 Mtr.

20 Providing and erecting XLPE (IS:7098) (I)-88 ISI

armoured cable multistrand Aluminium conductor for

1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables

62.50 (C) 4 core 16 Sq. mm 151.50 Mtr.

21 500.00 Providing & laying approved make Double walled

Mtr. corrugated pipes (DWC) of polyethylene (conforming to

IS 14930 II) with necessary connecting accessories of

same material at required depth in existing trench for

laying of cable. below ground / road surface for

enclosing cable. (C) 50 mm Dia

22 Supplying following size of Light duty “A” Class G.I.

Pipe & erecting as directed by Engineer-in-charge.

23 Providing and fixing heavy duty flange type brass cable

gland with rubber ring for PVC insulated armoured

cable complete with out going tails, insulating tape etc

for following size of cables.

50.00 (d) 2 to 4 core 10 Sq. mm 38.38 Ea.

24 Providing and fixing heavy duty flange type brass cable

gland with rubber ring for PVC insulated armoured

cable complete with out going tails, insulating tape etc

for following size of cables.

4.00 (d) 2 to 4 core 16 Sq. mm 47.47 Ea.

25 Providing and, fixing heavy duty flange type brass cable

gland with rubber ring for PVC insulated armoured

cable complete with out going tails, insulating tape etc

for following size of cables.

4.00 (d) 2 to 4 core 25 Sq. mm 51.51 Ea.

SBD SECTION-7 BILL OF QUANTITIES-201

26 25.00 Supplying and erecting approved make Octagonal pole

Ea. made from HR sheet steel. The pole should be made

as per IS. and shall be coated with hot dip galvanizing

as per IS 2629/2633/4759, suitable suspend local wind

speed with integral Junction box consist of terminal

plate of min 6mm Hylam sheet, standard profile

35mmX7.5mm Din-Rail for MCB Mounting, stud type

terminal and arrangement for cable termination to be

erected With Suitable foundation (Included) as per

details given by manufacturer considering site

requirement. (D) 6 Mtr. Long 70 mm Top X 135 mm

bottom dia, 3 mm thickness with

200mmX200mmX12mm base plate, 4-M20 Bolts and

600mm long with necessary G.I. J Bolts .Approx Pole

27 Providing and erecting Street Light pole bracket

comprising main B Class MS pipe of 4.2 cm/require

outside dia. complete with suitable B Class M.S. sleeve

tubing of approx. 45cms.length and suitable for

mm /80mm / required size of pole top having sufficient

fasteners for fixing the brackets and having spread of

1.5.mtr. length with 110 deg.with vertical plane &

suitable welded stays, reducer and with check nuts

complete painted with one coat of Red oxide / PU base

primer and two coats of Aluminium / PU paint. paint

with following nos of arms.

25.00 (A) Single Arm Bracket 1.5 Mtr. 626.20 Ea.

0.00 (B) Double arm Bracket 1.5 Mtr. 916.07 Ea.

28 25.00 Supplying and erecting LED street light / Flood light

Ea. fittings with High power White LEDs wattage of 3 Watt

and above assembled on single MCPCB, efficiency

more than 130 lm/w and corrosion free High pressure

die cast aluminum housing with smooth finish powder

coated and heat sink extruded aluminium with diffuser

and Polycarbonate optics/ lenses, with toughened glass

with company mark/name engraved or embossed

to 270 V,Power Factor more than 0.95, THD < 10 %,

CCT 3000 K to 5700K, Uniformity ratio >0.45,

Luminaire efficacy> 100 lumens/watt. LED driver

efficiency > 85 %.( fittings required LM-79 & LM-80

certificates) (NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity

between the ranges shown.) (A) Street Light (IP-65),

Surge protection -4KV integral and Light must have

440VAC line supply with over-voltage protection. (ii)

above 36 to 48 Watts. Cat III

SBD SECTION-7 BILL OF QUANTITIES-202

SBD SECTION-7 BILL OF QUANTITIES-203

29 2.00 Supplying & erecting approved make Digital time switch

Ea. having lithium cell 6 years operative and operate

battery backup 1 channel day clock with 14 memory

programme, suitable to operate on 240V + 5%, 16A

with, floating contacts Minimum switching setup time

minimum & LCD display. Also comprised permanent

ON/OFF switching. Programming switches & housed in

fire proof thermoplastic enclosure & transparent cover

erected as required with necessary connection erected

30 2.00 Supplying & erecting power contactor, AC3 duty for

Ea. time switch complete erected as per direction Cat III.

(B) 2 pole 250V 32 Amp. 1883.65 Ea

31 2.00 Supplying & erecting IP 55 grade following size section

Ea. pillar fabricated from joint less M.S. Sheet with angle

iron legs made from jointless M.S. Angle with cable

clamps to be buried in ground to have appropriate

erection to work uniform until erected with cement

concrete foundation and 45 cm high bricks work

finishing with plaster etc. hinged double door internally

supported on both side, with internal and outside

looking arrangement with look and keys in duplicate

x 35 x 5 mm M.S. Angle of Two Nos. one is welded and

other with nut and bolt for erecting Bakelite sheet.

Painting the Section Pillar inside and out side with three

tank powder coated paint. section pillar roof should be

without joint with water leakage proof & tested as per

IP 55 test & followed by IS 2147 of 1962. (B) 75 X 60 X

45 cm section pillar fabricated from 16 Gauge MS

Sheet with angle iron legs 45 cm long made from 35 X

35 X 5 mm thick MS angle.

32 25.00 Supplying & erecting approved make SMC press

Ea. moulded composite FRP. loop-in, loop- out approx.

2mm thick box complete with Bakelite connector strip

5way(3P+N+E), DIN rail for mounting mob & hinged

doors as per requirement having locking arrangements

with mounting clamp with nuts, bolts & washers

suitable for erection on pole with cable clamps& earth

bolt of following size of box. (c) 150mm x 125mm x

SBD SECTION-7 BILL OF QUANTITIES-204

33 500.00 Making trench in Hard Murrum / Tar Road of suitable

Mtr. width of 90 cm or required depth for laying any size of

cable or locating the fault all over the run and back

filling the same and making the surface as normal

ground. 62.62 Mtr.

34 60.00 If additional machinery like hammer driller or JCB use

Mtr. [Add] 297.95 Mtr.

35 1.00 GEB Connection Charges 50500.00 Job.

Add :- 18% of GST, Rs.

Add :- 2% of Contingency Charges, Rs.

Add :- 1% of Qaulity Controll, Rs.

SBD SECTION-7 BILL OF QUANTITIES-205

ZALOD MUNICIPALITY, ZALOD

NAME OF WORK :- ESTIMATE FOR CONSTRUCTION WORK OF C. C. ROAD FROM RIZWAN LIMADI'S

HOUSE TO ARUN MAKUL'S HOUSE AT ZALOD ( WARD 2 ).

Qty. Description Total Rate Unit Amount

1 27.00 Demolition and disposal of unserviceable materials

Cmt. with all lead and lift.(i) Lime concrete.

2 53.50 Box Cutting the Road Surface to proper slope and

Cmt. camber for making a base for road work including

removing the excavated stuff and dipositing to road

slope as directed all lead and lift etc. complete upto

50 mt. Lead 112.02 Cmt.

3 27.00 Providing and laying compacted 100 mm thick B.T.

Cmt. Metalling (45 to 63 mm size) using Stone screening

13.2 mm of 0.16 Cmt./10 Smt. and 0.08 Cmt./10 Smt.,

Stone Dust including spreading in uniform layer,

watering and consolidation by vibratory roller achived

the desired density, as per clause.404 of M.O.R.T. &

H. specification etc. complete.

4 27.00 Providing and laying cement concrete (1:4:8) (1

Cmt. Cement, 4 Coarse sand, 8 Crushed stone agreegate

40 mm nominal) and curing complete excluding cost

of formwork in foundation and plinth.

5 40.00 Providing and laying cement concrete work M200 and

Cmt. curing complete excludng the cost of form work an

reinforcement of reinforced concrete work.

6 266.00 Labour charges for concreting with vacume

Smt. dewatering Technique (Trimix or equivalent type)

including loading, unloading, carting, companing

complete with "C" channelas as per requirement and

labour charges on directed by Engineer-in-charge.

SBD SECTION-7 BILL OF QUANTITIES-205

7 3.00 Renovation of manhole by increasing the height at top

Nos. including cost of excavation, refitting of C. I. manhole

frame and cover curing etc. complete incl. all carting

and providing of materials which is required for the

purpose (except manhole frame and cover) For all

type manhole by providing RCC 1:2:4 Partition walls

with required reinforcement 25 cm thick and circular

opening with 500mm clear dia and 0.40 mt. av. ht.

8 8.40 Supplying promoulded bituminous joint filler. (I) 12mm

Cmt thick 553.79 Cmt

Add :- 18% GST Rs.

Add :- 2% of Contingency Charges Rs.

Add :- 1% of Qaulity Controll Rs.

SBD SECTION-7 BILL OF QUANTITIES-206

ZALOD MUNICIPALITY, ZALOD

NAME OF WORK :- ESTIMATE FOR CONSTRUCTION WORK OF C. C. ROAD FROM ILIYAS MANSURI TO

ADMIN GUDALA AT ZALOD ( WARD 2 ).

Qty. Description Total Rate Unit Amount

1 27.00 Demolition and disposal of unserviceable materials with

Cmt. all lead and lift.(i) Lime concrete.

2 54.00 Box Cutting the Road Surface to proper slope and

Cmt. camber for making a base for road work including

removing the excavated stuff and dipositing to road

slope as directed all lead and lift etc. complete upto

mt. Lead 112.02 Cmt.

3 27.00 Providing and laying compacted 100 mm thick B.T.

Cmt. Metalling (45 to 63 mm size) using Stone screening

13.2 mm of 0.16 Cmt./10 Smt. and 0.08 Cmt./10 Smt.,

Stone Dust including spreading in uniform layer,

watering and consolidation by vibratory roller achived

the desired density, as per clause.404 of M.O.R.T. & H.

specification etc. complete.

4 27.00 Providing and laying cement concrete (1:4:8) (1

Cmt. Cement, 4 Coarse sand, 8 Crushed stone agreegate

40 mm nominal) and curing complete excluding cost of

formwork in foundation and plinth.

5 40.50 Providing and laying cement concrete work M200 and

Cmt. curing complete excludng the cost of form work an

reinforcement of reinforced concrete work.

SBD SECTION-7 BILL OF QUANTITIES-207

6 269.50 Labour charges for concreting with vacume dewatering

Smt. Technique (Trimix or equivalent type) including loading,

unloading, carting, companing complete with "C"

channelas as per requirement and labour charges on

directed by Engineer-in-charge.

7 3.00 Renovation of manhole by increasing the height at top

Nos. including cost of excavation, refitting of C. I. manhole

frame and cover curing etc. complete incl. all carting

and providing of materials which is required for the

purpose (except manhole frame and cover) For all type

manhole by providing RCC 1:2:4 Partition walls with

required reinforcement 25 cm thick and circular

opening with 500mm clear dia and 0.40 mt. av. ht.

8 8.52 Supplying promoulded bituminous joint filler. (I) 12mm

Cmt thick 553.79 Cmt

Add :- 18% GST Rs.

Add :- 2% of Contingency Charges Rs.

Add :- 1% of Qaulity Controll Rs.

SBD SECTION-7 BILL OF QUANTITIES-208

ZALOD MUNICIPALITY, ZALOD

ESTIMATE FOR PROVIDING, SUPPLYING & ERECTING OF LED STREET LIGHT POLE WITH ALL ACCESSORIES

FROM MOHAN GANTI HOUSE TO KUMAR SHALA AT ZALOD .

Sr. Quantity Discription Total Unit Amount

1 Supplying & erecting XLPE(IS:7098)(I)-88 ISI

unarmoured copper cable 1.1 KV grade to be erected

as directed of following size.

184.00 (E) 3 Core 2.5 sq. mm 136.35 Mtr.

2 2.00 Supplying & erecting following spare parts for panel

Ea. mounting Switch Disconnector Fuse Units. Operational

Handle Assembly Complete for (i) 32/63/125 Amps.

3 2.00 Supplying and erecting triple pole & neutral 440V / 500V

Rmt. panel mounting Copper Busbars with four equal Nos. of

electrolyte bus having current density not more than

Amp. / sq.mm (Rated current / cross section area) duly

wrapped with colour insulating tape for phase sequence

of following current carrying capacity, erected with

necessary bus bar supports /insulators, main cable

socket to each bar, erected in existing cubical panel with

necessary connections. (A) Suitable for 100 Amp.

Capacity. 1961.42 Rmt.

4 2.00 Supplying & erecting following spare parts for panel

Ea. mounting Switch Disconnector Fuse Units. Neutral Link

5 2.00 Supplying and erecting approved make 415V bakelite

Ea. fuse fittings for front connection / busbar type to

accommodate HRC fuse link, with spin - riveted brass

contact, having thermo plastic inflammable material &

single piece extruded brass box contact to lock with

adequate cable hole to accommodate aluminium

conductors suitable for (without HRC fuse). For 63 Amp.

6 2.00 Supplying and erecting Ammeter / Voltmeter selector

Ea. switch for 3 phase AC Supply 500 V on existing panel

board with necessary connections. 317.14 Ea.

7 2.00 Supplying and erecting approved make suitable panel

Ea. indicator LED type lamp, lens cover, complete erected

with necessary connections. 43.43 Ea.

SBD SECTION-7 BILL OF QUANTITIES-209

8 2.00 Providing & erecting Spares For Air Circuit Breakers as

Ea. follows: (B) Auxiliary Contact Block for CN-CS 800 to

9 Mains with ISI marked, 1.5KV grade electrolyte multi

stranded, annealed copper conductor with heat resistant

PVC insulated conforms to IS 694, IEC - 227 erected in

existing pipe of following size (Specifically for control

panel, relays, power switchgears, motor starters &

control wiring) with required size of copper lugs, nuts

and bolts if required.

115.00 For Control Cable.(c) One wire 2.50 sq. mm 26.26 Mtr.

10 Mains with ISI marked, 1.5KV grade electrolyte multi

stranded, annealed copper conductor with heat resistant

PVC insulated conforms to IS 694, IEC - 227 erected in

existing pipe of following size (Specifically for control

panel, relays, power switchgears, motor starters &

control wiring) with required size of copper lugs, nuts

and bolts if required.

115.00 For Power Cable. (d) One wire 4.00 sq. mm 35.35 Mtr.

11 50.00 Providing and erecting XLPE (IS:7098)(I)-88 ISI

Mtr. armoured cable multistrand Aluminium conductor for

1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables.(e)

core 25 Sq. mm 188.87 Mtr.

12 2.00 Providing and erecting Approved make Four pole

Ea. moulded case circuit breaker having breaking capacity

ICU of 25 KA. at 415 V,having normal current rating up

to 25 A to 100A. with Fixed thermal & magnetic release

suitable to work on A.C. supply 50 c/s. with all internal

connections, spreader tinned copper & complete

erected in existing 16 G.M.S. housing. Cat.III.

ICS=100% of ICU only.

13 Providing and erecting Approved make RCCBs

conforming to IS: 12640 and having sensitivity of 30 mA

and Short Circuit withstand capacity of 10 KA and

suitable for operation on 3 phase and neutral

415V,50Hz. having characteristic of quick action &

tripping with all advance feature & do not incorporate

any electronic component for following Max. Rating

erected as directed.

2.00 (iii) 63 Amps. FP Cat.III 3040.10 Ea.

SBD SECTION-7 BILL OF QUANTITIES-210

14 23.00 Providing and erecting Miniature circuit breaker single

Ea. pole 6A to 25A suitable to operate on 240 V A.C. system

and having breaking capacity 10 KA to be erected in

existing box. confirming to IS 8828/1996 with ISI Mark.

Cat III 112.11 Ea.

15 5.00 Providing and erecting Annealed bare Copper wire 8 to

16 23.00 Providing and erecting Pipe type earthing having

Ea. cms.long and 2.5 cms. dia. galvanised iron pipe with

coupling and buch buried in specially prepared earth pit

complete with necessary 8 SWG earth wire.

17 Supplying & erecting funnel type earthing having earth

plate of following size burred in specifically prepared

earth pit 3 mtr. below ground with 40 kg. charcoal and

salt with alternate layers of charcoal & salt, 20mm. dia.

G.I. pipe with Funnel with a wire mesh for watering &

bricks masonry block, C.I. Cover complete as per para

7.3 of IS 3043 with necessary length of double

Galvanised Iron / copper earth wire No 6 SWG bolted

with lug to the plate and covered in 12 mm dia. G.I. pipe

2.5 mtr long complete connected to the nearest switch

gear with end socket as per direction & duly tested by

earth tester confirming to IS (As per drawing) with

following specification.

2.00 (C) with 60 x 60 x 0.315 cms. Copper earth plate 7874.97 Ea.

18 2.00 For using salt and charcoal/coke as required for pipe 171.70 Ea.

Ea. type earthing.

19 Providing and erecting XLPE (IS:7098) (I)-88 ISI

armoured cable multistrand /Solid Aluminium conductor

for 1.1 KV. To be laid on wall with necessary clamps or

in existing trench/pipe of following size of cables

460.00 (C) 4 core 10 Sq. mm 138.37 Mtr.

20 Providing and erecting XLPE (IS:7098) (I)-88 ISI

armoured cable multistrand Aluminium conductor for

KV. to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables

57.50 (C) 4 core 16 Sq. mm 151.50 Mtr.

SBD SECTION-7 BILL OF QUANTITIES-211

21 460.00 Providing & laying approved make Double walled

Mtr. corrugated pipes (DWC) of polyethylene (conforming to

IS 14930 II) with necessary connecting accessories of

same material at required depth in existing trench for

laying of cable. below ground / road surface for

enclosing cable. (C) 50 mm Dia

22 Supplying following size of Light duty “A” Class G.I. Pipe

& erecting as directed by Engineer-in-charge.

23 Providing and fixing heavy duty flange type brass cable

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for

following size of cables.

46.00 (d) 2 to 4 core 10 Sq. mm 38.38 Ea.

24 Providing and fixing heavy duty flange type brass cable

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for

following size of cables.

4.00 (d) 2 to 4 core 16 Sq. mm 47.47 Ea.

25 Providing and, fixing heavy duty flange type brass cable

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for

following size of cables.

4.00 (d) 2 to 4 core 25 Sq. mm 51.51 Ea.

26 23.00 Supplying and erecting approved make Octagonal pole

Ea. made from HR sheet steel. The pole should be made as

per IS. and shall be coated with hot dip galvanizing as

per IS 2629/2633/4759, suitable suspend local wind

speed with integral Junction box consist of terminal

plate of min 6mm Hylam sheet, standard profile

35mmX7.5mm Din-Rail for MCB Mounting, stud type

terminal and arrangement for cable termination to be

erected With Suitable foundation (Included) as per

details given by manufacturer considering site

requirement. (D) 6 Mtr. Long 70 mm Top X 135 mm

bottom dia, 3 mm thickness with

200mmX200mmX12mm base plate, 4-M20 Bolts and

600mm long with necessary G.I. J Bolts .Approx Pole

SBD SECTION-7 BILL OF QUANTITIES-212

27 Providing and erecting Street Light pole bracket

comprising main B Class MS pipe of 4.2 cm/require

outside dia. complete with suitable B Class M.S. sleeve

tubing of approx. 45cms.length and suitable for 76.5 mm

/80mm / required size of pole top having sufficient

fasteners for fixing the brackets and having spread of

1.5.mtr. length with 110 deg.with vertical plane &

suitable welded stays, reducer and with check nuts

complete painted with one coat of Red oxide / PU base

primer and two coats of Aluminium / PU paint. paint with

following nos of arms.

23.00 (A) Single Arm Bracket 1.5 Mtr. 626.20 Ea.

0.00 (B) Double arm Bracket 1.5 Mtr. 916.07 Ea.

28 23.00 Supplying and erecting LED street light / Flood light

Ea. fittings with High power White LEDs wattage of 3 Watt

and above assembled on single MCPCB, efficiency

more than 130 lm/w and corrosion free High pressure

die cast aluminum housing with smooth finish powder

coated and heat sink extruded aluminium with diffuser

and Polycarbonate optics/ lenses, with toughened glass

with company mark/name engraved or embossed

to 270 V,Power Factor more than 0.95, THD < 10 %,

CCT 3000 K to 5700K, Uniformity ratio >0.45,

Luminaire efficacy> 100 lumens/watt. LED driver

efficiency > 85 %.( fittings required LM-79 & LM-80

certificates) (NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The Engineer

incharge may select any wattage capacity between the

ranges shown.) (A) Street Light (IP-65), Surge

protection -4KV integral and Light must have 440VAC

line supply with over-voltage protection. (ii) above 36 to

48 Watts. Cat III

29 2.00 Supplying & erecting approved make Digital time switch

Ea. having lithium cell 6 years operative and operate battery

backup 1 channel day clock with 14 memory

programme, suitable to operate on 240V + 5%, 16A

with, floating contacts Minimum switching setup time

minimum & LCD display. Also comprised permanent

ON/OFF switching. Programming switches & housed in

fire proof thermoplastic enclosure & transparent cover

erected as required with necessary connection erected

30 2.00 Supplying & erecting power contactor, AC3 duty for time

Ea. switch complete erected as per direction Cat III. (B)

pole 250V 32 Amp. 1883.65 Ea

SBD SECTION-7 BILL OF QUANTITIES-213

31 2.00 Supplying & erecting IP 55 grade following size section

Ea. pillar fabricated from joint less M.S. Sheet with angle

iron legs made from jointless M.S. Angle with cable

clamps to be buried in ground to have appropriate

erection to work uniform until erected with cement

concrete foundation and 45 cm high bricks work

finishing with plaster etc. hinged double door internally

supported on both side, with internal and outside looking

arrangement with look and keys in duplicate 35 x 35 x

mm M.S. Angle of Two Nos. one is welded and other

with nut and bolt for erecting Bakelite sheet. Painting the

Section Pillar inside and out side with three tank powder

coated paint. section pillar roof should be without joint

with water leakage proof & tested as per IP 55 test &

followed by IS 2147 of 1962. (B) 75 X 60 X 45 cm

section pillar fabricated from 16 Gauge MS Sheet with

angle iron legs 45 cm long made from 35 X 35 X 5 mm

thick MS angle.

32 23.00 Supplying & erecting approved make SMC press

Ea. moulded composite FRP. loop-in, loop- out approx.

2mm thick box complete with Bakelite connector strip

5way(3P+N+E), DIN rail for mounting mob & hinged

doors as per requirement having locking arrangements

with mounting clamp with nuts, bolts & washers suitable

for erection on pole with cable clamps& earth bolt of

following size of box. (c) 150mm x 125mm x 100mm

33 460.00 Making trench in Hard Murrum / Tar Road of suitable

Mtr. width of 90 cm or required depth for laying any size of

cable or locating the fault all over the run and back filling

the same and making the surface as normal ground.

34 60.00 If additional machinery like hammer driller or JCB use

Mtr. [Add] 297.95 Mtr.

35 1.00 GEB Connection Charges 50500.00 Job.

Add :- 18% of GST, Rs.

Add :- 2% of Contingency Charges, Rs.

Add :- 1% of Qaulity Controll, Rs.

SBD SECTION-7 BILL OF QUANTITIES-214

ZALOD MUNICIPALITY, ZALOD

NAME OF WORK :- ESTIMATE FOR CONSTRUCTION WORK OF C. C. ROAD FROM FATEPURA ROAD TO

ADIL HOUSE AT ZALOD ( WARD 2 ).

Qty. Description Total Rate Unit Amount

1 32.00 Demolition and disposal of unserviceable materials with

Cmt. all lead and lift.(i) Lime concrete.

2 64.00 Box Cutting the Road Surface to proper slope and

Cmt. camber for making a base for road work including

removing the excavated stuff and dipositing to road

slope as directed all lead and lift etc. complete upto

mt. Lead 112.02 Cmt.

3 32.00 Providing and laying compacted 100 mm thick B.T.

Cmt. Metalling (45 to 63 mm size) using Stone screening

13.2 mm of 0.16 Cmt./10 Smt. and 0.08 Cmt./10 Smt.,

Stone Dust including spreading in uniform layer,

watering and consolidation by vibratory roller achived

the desired density, as per clause.404 of M.O.R.T. & H.

specification etc. complete.

4 32.00 Providing and laying cement concrete (1:4:8) (1

Cmt. Cement, 4 Coarse sand, 8 Crushed stone agreegate

mm nominal) and curing complete excluding cost of

formwork in foundation and plinth.

5 48.00 Providing and laying cement concrete work M200 and

Cmt. curing complete excludng the cost of form work an

reinforcement of reinforced concrete work.

6 318.50 Labour charges for concreting with vacume dewatering

Smt. Technique (Trimix or equivalent type) including loading,

unloading, carting, companing complete with "C"

channelas as per requirement and labour charges on

directed by Engineer-in-charge.

SBD SECTION-7 BILL OF QUANTITIES-215

7 4.00 Renovation of manhole by increasing the height at top

Nos. including cost of excavation, refitting of C. I. manhole

frame and cover curing etc. complete incl. all carting

and providing of materials which is required for the

purpose (except manhole frame and cover) For all type

manhole by providing RCC 1:2:4 Partition walls with

required reinforcement 25 cm thick and circular opening

with 500mm clear dia and 0.40 mt. av. ht.

8 9.98 Supplying promoulded bituminous joint filler. (I) 12mm

Cmt thick 553.79 Cmt

Add :- 18% GST Rs.

Add :- 2% of Contingency Charges Rs.

Add :- 1% of Qaulity Controll Rs.

SBD SECTION-7 BILL OF QUANTITIES-216

ZALOD MUNICIPALITY, ZALOD

NAME OF WORK :- ESTIMATE FOR CONSTRUCTION WORK OF C. C. ROAD FROM FATEPURA ROAD TO

SAYARABEN COMPOUND AT ZALOD ( WARD 2 ).

Qty. Description Total Rate Unit Amount

1 43.00 Demolition and disposal of unserviceable materials with all

Cmt. lead and lift.(i) Lime concrete.

2 85.50 Box Cutting the Road Surface to proper slope and camber

Cmt. for making a base for road work including removing the

excavated stuff and dipositing to road slope as directed all

lead and lift etc. complete upto 50 mt. Lead

3 43.00 Providing and laying compacted 100 mm thick B.T.

Cmt. Metalling (45 to 63 mm size) using Stone screening

mm of 0.16 Cmt./10 Smt. and 0.08 Cmt./10 Smt., Stone

Dust including spreading in uniform layer, watering and

consolidation by vibratory roller achived the desired

density, as per clause.404 of M.O.R.T. & H. specification

4 43.00 Providing and laying cement concrete (1:4:8) (1 Cement,

Cmt. Coarse sand, 8 Crushed stone agreegate 40 mm nominal)

and curing complete excluding cost of formwork in

foundation and plinth.

5 64.50 Providing and laying cement concrete work M200 and

Cmt. curing complete excludng the cost of form work an

reinforcement of reinforced concrete work.

6 427.00 Labour charges for concreting with vacume dewatering

Smt. Technique (Trimix or equivalent type) including loading,

unloading, carting, companing complete with "C"

channelas as per requirement and labour charges on

directed by Engineer-in-charge.

SBD SECTION-7 BILL OF QUANTITIES-217

7 5.00 Renovation of manhole by increasing the height at top

Nos. including cost of excavation, refitting of C. I. manhole

frame and cover curing etc. complete incl. all carting and

providing of materials which is required for the purpose

(except manhole frame and cover) For all type manhole by

providing RCC 1:2:4 Partition walls with required

reinforcement 25 cm thick and circular opening with

500mm clear dia and 0.40 mt. av. ht.

8 13.13 Supplying promoulded bituminous joint filler. (I) 12mm

Cmt thick 553.79 Cmt

Add :- 18% GST Rs.

Add :- 2% of Contingency Charges Rs.

Add :- 1% of Qaulity Controll Rs.

SBD SECTION-7 BILL OF QUANTITIES-218

ZALOD MUNICIPALITY, ZALOD

NAME OF WORK :- ESTIMATE FOR CONSTRUCTION WORK OF C. C. ROAD AT PUSHPA KUNJ SOCIETY BHAG

1 AT ZALOD (WARD 3).

Qty. Description Total Rate Unit Amount

1 183.00 Box Cutting the Road Surface to proper slope and camber

Cmt. for making a base for road work including removing the

excavated stuff and dipositing to road slope as directed all

lead and lift etc. complete upto 50 mt. Lead

2 91.50 Providing and laying compacted 100 mm thick B.T.

Cmt. Metalling (45 to 63 mm size) using Stone screening

mm of 0.16 Cmt./10 Smt. and 0.08 Cmt./10 Smt., Stone

Dust including spreading in uniform layer, watering and

consolidation by vibratory roller achived the desired

density, as per clause.404 of M.O.R.T. & H. specification

3 91.50 Providing and laying cement concrete (1:4:8) (1 Cement,

Cmt. Coarse sand, 8 Crushed stone agreegate 40 mm nominal)

and curing complete excluding cost of formwork in

foundation and plinth.

4 137.00 Providing and laying cement concrete work M200 and

Cmt. curing complete excludng the cost of form work an

reinforcement of reinforced concrete work.

5 913.00 Labour charges for concreting with vacume dewatering

Smt. Technique (Trimix or equivalent type) including loading,

unloading, carting, companing complete with "C"

channelas as per requirement and labour charges on

directed by Engineer-in-charge.

SBD SECTION-7 BILL OF QUANTITIES-219

6 6.00 Renovation of manhole by increasing the height at top

Nos. including cost of excavation, refitting of C. I. manhole

frame and cover curing etc. complete incl. all carting and

providing of materials which is required for the purpose

(except manhole frame and cover) For all type manhole by

providing RCC 1:2:4 Partition walls with required

reinforcement 25 cm thick and circular opening with

500mm clear dia and 0.40 mt. av. ht.

7 28.05 Supplying promoulded bituminous joint filler. (I) 12mm

Cmt thick 553.79 Cmt

Add :- 18% GST Rs.

Add :- 2% of Contingency Charges Rs.

Add :- 1% of Qaulity Controll Rs.

SBD SECTION-7 BILL OF QUANTITIES-220

ZALOD MUNICIPALITY, ZALOD

NAME OF WORK :- ESTIMATE FOR CONSTRUCTION WORK OF C. C. ROAD AT PUSHPA KUNJ SOCIETY BHAG

1 AT ZALOD (WARD 3).

Qty. Description Total Rate Unit Amount

1 192.50 Box Cutting the Road Surface to proper slope and camber

Cmt. for making a base for road work including removing the

excavated stuff and dipositing to road slope as directed all

lead and lift etc. complete upto 50 mt. Lead

2 96.50 Providing and laying compacted 100 mm thick B.T.

Cmt. Metalling (45 to 63 mm size) using Stone screening

mm of 0.16 Cmt./10 Smt. and 0.08 Cmt./10 Smt., Stone

Dust including spreading in uniform layer, watering and

consolidation by vibratory roller achived the desired

density, as per clause.404 of M.O.R.T. & H. specification

3 96.50 Providing and laying cement concrete (1:4:8) (1 Cement,

Cmt. Coarse sand, 8 Crushed stone agreegate 40 mm nominal)

and curing complete excluding cost of formwork in

foundation and plinth.

4 144.50 Providing and laying cement concrete work M200 and

Cmt. curing complete excludng the cost of form work an

reinforcement of reinforced concrete work.

5 962.50 Labour charges for concreting with vacume dewatering

Smt. Technique (Trimix or equivalent type) including loading,

unloading, carting, companing complete with "C" channelas

as per requirement and labour charges on directed by

Engineer-in-charge.

SBD SECTION-7 BILL OF QUANTITIES-221

6 6.00 Renovation of manhole by increasing the height at top

Nos. including cost of excavation, refitting of C. I. manhole frame

and cover curing etc. complete incl. all carting and

providing of materials which is required for the purpose

(except manhole frame and cover) For all type manhole by

providing RCC 1:2:4 Partition walls with required

reinforcement 25 cm thick and circular opening with

500mm clear dia and 0.40 mt. av. ht.

7 28.88 Supplying promoulded bituminous joint filler. (I) 12mm thick

Add :- 18% GST Rs.

Add :- 2% of Contingency Charges Rs.

Add :- 1% of Qaulity Controll Rs.

SBD SECTION-7 BILL OF QUANTITIES-222

ZALOD MUNICIPALITY, ZALOD

ESTIMATE FOR PROVIDING AND LAYING OF 300MM DIA R.C.C. NP3 PIPE DRAIN AT PUSHPA KUNJ

SOCIETY BHAG 2 AT ZALOD.

Sr. Qty. Total Per Amount

1 263.00 Excavation for Foundation up to 1.5M depth including sorting

Cmt. of useful materials and dispoising of the excavated stuff up to

50 meter lead in Loose or Soft soil.

2 105.00 Excavation for Foundation1.5M to 3.0 M depth including

Cmt. sorting of useful materials and dispoising of the excavated

stuff up to 50 meter lead in Loose or Soft soil.

3 175.00 Supplying and fixing reinforced concrete heavy duty non-

Rmt. pressure pipes with collars for culverts carring heavy trafficas

per IS 458-1991Specification including setting and joining the

pipes in C:M 1:2 watering and laying (to level or slopes) of I.S.

class NP3 of following internal diameters. (iii) 300mm Dia.

4 355.00 Filling Availabale Excavated Earth (excluding Rock) in

Cmt. trenchess plinth, sides of foundation etc. in layers not

exceding 20 cm in depth consolidated each deposited layer

by ramming and watering

5 17.00 Construction manhole with R.C.C. top slab in 1:2:4 mix (1

Nos. cement:2 coarse sand:4 graded stone aggregate 20mm

nominal size) foundation concrete 1 : 3 : 6 mix (1 cement :

coarse sand :6 brick bats 40 + 50mm size) inside plastering

15mm thick with cement mortar 1: 5 (1: cement :5 coarse

sand ) finished with a floating coat of neat cement and

making channels in cement concrete 1:2:4 mix 91: cement :2

coarse sand : 4 stone aggregate 20 mm nominal size)

finished smooth complete including curing and festing (i)

inside size 900mm x 1200 mm and 1.5 M deep including C.I

cover with frame size 560 mm diameter total weight of cover

and frame to be not less than 128 Kgs. ( wt. of cover 64 Kg.

and wt. of frame 64 Kg. ) ( A) with 230 mm thick walls of brick

masonry using brick having crushing strength not less than

Kg. / Sq.cm. in cement mortat 1:5 ( 1: cement :5 coarse sand

) (3) A type depth 0.90 meter for 300 mm diameter sewer.

SBD SECTION-7 BILL OF QUANTITIES-223

6 10.50 Providing and laying P.C.C. (1:3:6) mix (1 cement, 3 coarse

Cmt. sand, 6 hand broken stone aggregate of 40mm nominal size)

and curing complete excluding the cost of formwork in (A)

Foundation and Plinth.

7 10.50 Filling in plinth with sand under floors including watering

Cmt. ramming, consolidating and dressing complete

Add :- 18% of GST, Rs.

Add :- 1% of Qaulity Controll Rs.

Add :- 2% of Contingency Charges Rs.

SBD SECTION-7 BILL OF QUANTITIES-224

ZALOD MUNICIPALITY, ZALOD

NAME OF WORK :- ESTIMATE FOR CONSTRUCTION WORK OF C. C. ROAD FROM BHARATBHAI DEVDA'S

HOUSE TO KAMLESHBHAI DEVDA'S HOUSE IN SARVODAY SOCIETY AT ZALOD (WARD 3).

Qty. Description Total Rate Unit Amount

1 147.00 Box Cutting the Road Surface to proper slope and camber

Cmt. for making a base for road work including removing the

excavated stuff and dipositing to road slope as directed all

lead and lift etc. complete upto 50 mt. Lead

2 73.50 Providing and laying compacted 100 mm thick B.T.

Cmt. Metalling (45 to 63 mm size) using Stone screening

mm of 0.16 Cmt./10 Smt. and 0.08 Cmt./10 Smt., Stone

Dust including spreading in uniform layer, watering and

consolidation by vibratory roller achived the desired

density, as per clause.404 of M.O.R.T. & H. specification

3 73.50 Providing and laying cement concrete (1:4:8) (1 Cement,

Cmt. Coarse sand, 8 Crushed stone agreegate 40 mm nominal)

and curing complete excluding cost of formwork in

foundation and plinth.

4 110.50 Providing and laying cement concrete work M200 and

Cmt. curing complete excludng the cost of form work an

reinforcement of reinforced concrete work.

5 735.00 Labour charges for concreting with vacume dewatering

Smt. Technique (Trimix or equivalent type) including loading,

unloading, carting, companing complete with "C"

channelas as per requirement and labour charges on

directed by Engineer-in-charge.

SBD SECTION-7 BILL OF QUANTITIES-225

6 5.00 Renovation of manhole by increasing the height at top

Nos. including cost of excavation, refitting of C. I. manhole

frame and cover curing etc. complete incl. all carting and

providing of materials which is required for the purpose

(except manhole frame and cover) For all type manhole by

providing RCC 1:2:4 Partition walls with required

reinforcement 25 cm thick and circular opening with

500mm clear dia and 0.40 mt. av. ht.

7 22.50 Supplying promoulded bituminous joint filler. (I) 12mm

Cmt thick 553.79 Cmt

Add :- 18% GST Rs.

Add :- 2% of Contingency Charges Rs.

Add :- 1% of Qaulity Controll Rs.

SBD SECTION-7 BILL OF QUANTITIES-226