CIVIL MODIFICATION WORK AT ERS

Amount

CIVIL MODIFICATION WORKS AT ERS

Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar

Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of area 3 sq. metres and below

Of area beyond 3 sq. metres

Dismantling aluminium / Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 metres lead as directed by Engineer - in-Charge

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles above 25 mm and up to 40 mm

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin size 450x300 mm with single 15 mm C.P. brass pillar tap

Providing and fixing P.V.C. waste pipe for sink or wash basin including PVC. waste fittings complete.Semi rigid pipe40 mm dia

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighting not less than 190 gms

Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer- in- Charge. Concealed work, including cutting chases and making good the wall etc. 15 mm pipe 12 Kgf/ cm2

Providing and fixing uplasticised PVC connection pipe with brass unions:45 cm length15 mm nominal bore

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore

Providing and fixing C.P brass stop cock ( concealed) of standard design and of approved make conforming to IS: 893115 mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet:100 mm diameter

Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge.

Providing and fixing concealed brass threaded PVC coupling/elbow 15 mm nominal bore, weighing not less than 85 gms of approved brand

Providing and fixing PVC ball valve pasted of approved make of size 32mm

Providing and fixing SS floor trap with all fixtures and fittings including cutting of tile.

Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 25 mm pipe 12 kgf/cm2

Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 10Kgf/cm2- Internal work - Exposed on wall

Supplying and installing ready made RCC Septic tank including the cost of carriage, trenching, placing at the level below ground level as specified as per the direction of engineer in charge (Provision for CC/RCC/Sand/06mm aggregate for the preparation of bed shall be paid separately)<br><br>3. 25 to below 35 flush capacity

Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 m dia 4 Kgf/cm2 - External work - Exposed on wall

Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement-110 mm dia Door Elbow

Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement- 110 mm dia Bend

Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110x110x110 mm dia Door tee

Providing and fixing PVC moulded fittings /accessories for Rigid PVC pipes, including jointing with PVC solvent cement -110 mm dia Vent cowl

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionAnodised aluminium (anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15)

For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Anodised aluminium ( anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15)

Supplying and filling in plinth with good earth under floors, including watering, ramming consolidating and dressing complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:( The required cement shall be supplied by company at our store)<br>1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure above floor two level upto floor five level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete excluding cost of cement.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.excluding cost of OPC cement(The required OPC Cement for bed preparation shall be supplied by KMML at our store)<br>Size of Tile 600 x 600 mm.

Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.(The required OPC Cement shall be supplied by KMML at our store)

Plastering with 12 mm cement plaster of mix:<br>1:4 ( 1 cement : 4 fine sand)(The required cement shall be supplied by KMML at our store)

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.(The required OPC cement shall be supplied by KMML at our store)

Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1 mm), with wall thickness 2.0mm (±0.2 mm), corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 x 19 mm and 1 mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer's specification and direction of Engineer-in-chargeExtruded section profile size 48x40 mm

Providing and fixing to existing door frames24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness,fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge( For W.C. and bathroom door shutter).

Finishing walls with water proofing cement paint/acrylic/plastic emulsion of required shade:<br>Old work ( one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of Priming coat,labour,tools and tackles,scaffolding at all heights(The required primer/Paint shall be supplied by company at our store).

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness

Applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall/finished ceiling surface to prepare the surface even and smooth complete including all tools and tackles,labour,scaffolding at all heights but excluding cost of putty.(The required putty shall be supplied by company at our store)

Finishing walls with primer of all kind like water thinnable cement primer/ white cement of required shade on New work (Two or more coats) at all heights excluding the cost of cement primer as per the instruction of company representatives including all tools,scaffolding,tools,labour,tackles etc.<br>(The required primer shall be issued by Company at our stores)

Fabricating and Fixing at site half partition (double skinned )of height 1200 mm and width 75 mm to form separation between worktops/cabins. A frame work of height 120 cm is made using 19 mm Marine plywood [BWP Grade] IS: 710,sections with grid of average spacing 60cm x 60 cm in between vertical or horizontal members frame work is screwed on to floor/wall using steel screws of suitable size. Necessary cuttings in frames is to be provided to draw cable conduits. 9 mm tk Marine ply wood or flexy plywood is fixed on to both sides of the frame work with joints perfectly finished without any projections at 1 mm tk laminate (Type I, Type II, Type III) as specified in the list of approved brands is pasted on both sides as per the detail specification in drawing. 15 mm x 80 mm beech wooden beeding is fixed over top and at cut edges. Necessary grooves, cuttings and inlays should be given as per drawings. Cuttings for fixing electrical boxes/switches should be provided where ever necessary.A skirting is fixed on to it at floor level as per details. All exposed wooden surfaces are polished with melamine matt/clear after applying necessary base preparations , including concealing the screw heads cost of skirting and polishing will be separate item.(Refer Drg.No. A 01)

Fabricating and supplying at site, office table for the main counters made of 19 mm thick laminated MPW [BWP Grade] IS: 710 boxing as shown in drawing.The shutters,shelves shall be of 18 mm thick MPW laminate and drawers fixed on drawer channels,as per the size specified and in site finished with 0.6 mm laminate and edges finished with 1mm thick PVC edge banding tape and fixed with SS handes, locks of approved brands etc. and provided with castors at bottom concealed.The top shall be of 19 mm Marine ply wood with post formed front and rear and sides finished with 1 mm thick PVC edge banding tapes of matching shade. (Refer Dwg. A-02)

Fabricating and fixing at site file racks in the space provided with height of 75 cm from floor level using 19 mm thick MPW [BWP Grade] IS: 710 for shutters and sides, with shelves and with locks, stainless steel handles. All the cut edges of MPW should be finished by fixing PVC edge banding tapes 2 mm and 1 mm of matching shapes necessary racks as shown in the plan should be fixed inside on supporting clips as per required size of files. All the inside surfaces should be finished with 0.6 mm laminate (Refer Dwg No. A 03)

Fabricating and supplying at site,drawer unit made of 19 mm tk MPW[BWP Grade] IS: 710 and drawers fixed on drawer channels,as per the size specified and in site finished with 0.6 mm laminate and edges finished surfaces with PVC edge banding tape and fixed with SS handles,SS ball bearing drawer channel ,multi drawer lock system etc of approved brand and provided with pvc bush at bottom as in drawing.The top surface can be finished by post foaming the front portion and finishing all other cut edges with PVC edge banding tape. (Refer Dwg. A- 04)

Fabricating and fixing at site Master file rack in the space provided with height of 118 cm from floor level using 19 mm thick MPW [BWP Grade] IS: 710for shutters and sides, with shelves and with locks,SS self closing hinges, stainless steel handles of appoved brand. All the cut edges of MPW should be finished by fixing PVC edge banding tapes 2 mm and 1 mm of matching shapes necessary racks as shown in the plan should be fixed inside on supporting clips,base suppoted with pvc bush as per required size of files. All the inside surfaces should be finished with 0.6 mm laminate (Refer Dwg No. A 05)

Fabricating and fixing sill rail at site at the top end of the wall panelling a decorative teak wooden rail of size 80 mm x 20 mm screwed on to wall/ panelling to cover the cut edge of the plywood panel. All the two ends of the rail is given with a square wooden plain section as shown in detail. Inside the rail at 4 cm wide groove is given and is fixed with metalic laminate as specified in detail. The wooden surface is polished with melamine clear.

Fabricating and fixing at site on to wall/ panelled wall/ partition or counters at base a teak wooden skirting of size 75 mm x 6 mm with top detailed as per drawing and fixed on to wall or partition base using suitable size brass screws or headless brass nails and along with glue. The joints of the skirtings should be neat and no visible difference or overlap should be seen.The surface is polished with melamine semi gloss after preliminary preparations of the surface .

Polishing on wood work with ready mixed wax polish of approved brand and manufacture:New work

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with:12.5 mm thick tapered edge gypsum moisture resistant board

Providing,Making connection of PVC distribution branch with PVC Main of following sizes by providing and fixing tee, including cutting and threading the pipe etc.complete, of pipe dia. from 20mm to 40mm dia. pipes.

U. AZEEZKUNJU

Bidder Name

U. AZEEZKUNJU

hari sree engg works