Repair and Replacement of old and damaged wiring with copper conductor wiring in Garage Block Old Vidyut Bhawan Complex HPSEBL Shimla 4

Amount

[303] Wiring for light point /fan point /call bell point with 1.5 Sq.mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in PVC casing & capping band earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required.Group – C

Providing & Fixing LED Type Tube fitting 18/20 watt

P/F LED Type Panel 1'x4' Havells make

P/F Computer Board with 3Switch 5Amp + 3Socket 5Amp Complete in all respect

Wiring for circuit / submain with following . size PVC insulated heat resistant flame retardant (HPFR) and low smoke single core (flexible) copper conductor Cable in casing & capping along with 1 no. HRFRL/PVC insulated single core copper conductor cable of same size for earthing as required. [310] 2x1.5

Wiring for circuit/sub-main with 4x2.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in PVC casing & capping along with 2 No.2.5 Sq.mm.(4X2.5+2X2.5) HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required:- 2503 Exhaust Fan, Light duty, (Domestic) 225 mm sweep

2505 Exhaust Fan, Heavy duty, 300 mm sweep

P/F ventilation Type Fan 250 mm Sweep. Havells, , Bajaj Usha make or any other approved by Engineer-in-Charge.

[937] Supplying and fixing Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase,230 volts complete as required:-

[933] Supplying and fixing bakelite batten/angle holder including connections etc. as required:-

[929] Supplying and fixing ceiling rose on the existing junction box /wooden block including connections etc. as required.

[925] Supplying and fixing metal box of 180mm x 100mm x 60mm deep (nominal size) on surface/recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 5 pin 5/6 amps socket outlet and 5/6 amps, piano type switch, connections, painting etc. as required

[926] Supplying and fixing metal box of 180mmx100mmx60mm deep (nominal size) on surface /recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 6pin 15/16 amps socket outlet and 15/16 amps, piano type switch,connections, painting etc. as required.

[1701] Supplying & Erection of 6 amps to 32 amps ,rating 10kA Capacity 240 Volts ‘C’ Curves miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required Single Pole Category -A

Supplying and erection of 40/50/63 amps rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:- [1709] Double Pole . Cat-A.

Supplying and fixing LED type mirror light

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, with provision for 4-pole MCB / Isolator/RCCB/RCBO as incomer and SP MCBs as outgoing, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:- 1806 Double door-4 way

1807 Double door-6 way

1808 Double door-8 way

1809 Double door-12 way

[1602] Providing and fixing following rating and breaking capacity MCCB in the existing cubical panel board including drilling holes in the cubicle panel, making connections, etc. as required. 100 Amp. -16 KA

P/F MCCB Box for 100 Amp MCCB

[1204] Supplying and fixing sheet metal bus-bar chamber suitable for 100 Amp. 415 volts capacity with 4 No. copper strip bus-bars each of length 450mm & cross-sectional area(25.4mmx3.17mm), enclosure made from 1.6 mm thick M.S. sheet having overall dimensions (530mmx400mmx 150mm) nominal with all accessories including connections, earthing the body etc. as required:-

P/F metal networking rack wall mounted of size 40x40x15cm complete in all respect

P/F port switches for networking connection of following sizes complete in all respect - 8 port switch

Supplying and drawing LAN cable CAT 6E, solid copper conductor, protected with PVC sheath in PVC cassing & capping as required

P/F I/O Box single socket face for CAT6/CAT6E having RJ 45 connector type

P/F RJ 45 connector complete in all respect

Supplying and drawing following pair of five retardant, PVC insulated 0.5sqmm (FR Flexible) copper conductor, flat unmound telephone cable in PVC cassing & capping as required 2 Pair

NAGESH DHAMEJA

Bhuvneshwar Dutt Sharma