lot42 nagar panchyat chitbragaon me shri ram krisan balvikash mandir chitbaragaon me Ro plant ki isthapna ka kary

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of directed by Engineer-in-charge. DSR 2.6.1 excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge DSR 2.6.1

1:4:8 (1 Cement: 4 coarse sand (zone-ll) derived from natural sources: 8 graded stone aggregate 40 mm nominal size derived from natural sources) DSR 4.1.8

Brick work with common burnt clay F.P.S. (non) modular) bricks of class designation 7.5 in foundation Plinth in Cement mortar 1:4 (1) cement: 4 coarse DSR 6.1.1

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm DSR 11.41.2

Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement oncrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement: 3 coarse sand 6 graded stone aggregate 20 mm nominal size). DSR 10.13.1

Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866. The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. CPWD 12.47.2

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS: 12701 marked. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank DSR 18.48 (2023)

Supply & Assemble of ISO Certified complete reverse Osmosis based R.O. plant with flow rate 250 lph as per Market Rate.

Supply & Instalation of water coolar of 80 Itr capacity with all fitting & instalation complete as per Market Rate.

Supply and Instalation of all Boring P.V.C. Pipe with lowering of 1 H.P. Submersible water Pump with control panel as per Market Rate.