CONSTRACTION OF ABC (100 KENNELS) AT NAGAR NIGAM MADHUBANI

Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m

Making 25 cm (10") dia bore up to 4 mtr depth below ground with hand auger of approved quality in ordinary soi! (vide classification of soil item A ) true to plumb and without eccentri city in any stage of operation and disposal of the excavated earth up to 50 mtr , Lead in eluding all lifts , all complete as per approved disign and direction of E/l Details of cost for 4 piles of 4 m= 16 mtrs depth )

Earth work in excavation in foundation trenches or drains (not exceeding 1.5 m in with or 10 sqm on plan) including dressingof sides and ramming of bottoms lift up to 1.5m including getting out the excavated soil and disposal of surplus excavated soil as directed, with in a lead of 50m.

Disposal of building rubbish/malba/similar unserviceable, dismantledor waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge,beyond 50 minitial lead, for all leads including all lifts involved.

Supplying and filling in plints with local sand and under follrs including. Watering, ramming consolidating and dressing complete

Providing designation 100 A one brick Edge soling joint filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I.

Providing designation 100 A one brick flat soling joint filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I.

Providing to brick Bats filling Including all taxeses & royaltty etc..E/I

Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30

Construction of Dry Lean Cement concret sub base over a prepared sub grade with corse and fine aggregate conforming to IS:383, the size of coarse aggregate not exceeding 25mm, aggregate cement ratio not to exced 15:1, aggergate gradation after blending to be as per specification cement content not be less than 150 kg/cum, optimum moisture content during trial length concrete strength not be less than 10 Mpa at 7 days...com as per direction of eng..

Providing and laying factory made chamfered edge Cement Concrete paver blocks of required strength,thickness & size/shape, made by table vibratory method , to attain superior smooth finish using PU or equivalent moulds, laid in required Grey colour & pattern over 50mm thick compacted bed of coarse sand, compacting and proper embedding / laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with jamuna sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand in footpath, parks,lawns, drive ways or light traffic parking etc. all complete as per manufacturer’s specifications & direction of Engineer -in-Charge:

COLOR

WHITE

Providing laying in position concrete of specified grade exiuding the cost of centraing and shuttering all work up to plint level 1:02:04 (1 Cement:2 coarse sand: 4 graded stone aggregate 20mm nominal size)

Providing and laying in position machine batched ,machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grde reinforcd cement concrete Cement concrete grade M-20 (Nominal Mix) with 20 mm maximum size of stone aggregate.

Providing and laying in position machine batched,machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grde reinforcd cement concrete Cement concrete grade M-20 (Nominal Mix) with 20 mm maximum size of stone aggregate.

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding upto floor level including cost of binding wire, wastage and over laps upto 12mm horizontal/ inclined position of reinforcement bars in slab and beams, plinth, chajjas, lintels, upto 4.5m vertical length of reinforcement in wall columns (over laps shall be provided as per requirement of IS : 13920; IS 456 & SP : 34) etc. complete.

Centering and shuttering including strutting, propping stretching etc. complete for and removal of form work by sheet plate or ply wood shuttering for :

Brick work with bricks of class designation 100A in foundation sand plinth in : Cement mortar 1 .:4 (1 cement: 4 coarse sand )

Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4(1cement:2:2 coarse sand :4 graded stone aggregate 20mm nominal size)

Brick work with bricks of class designation 100A in foundation sand plinth in : Cement mortar 1:6 (1 cement: 6 coarse sand )

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to penings/ wooden frames with rawl plugs screws etc

Cement plaster in course sand 12 mm cement plaster of mix: 1:6(1 cement: 6 coarse sand) inner wall

Cement Plaster in coarse sand 15mm thick cement plaster of mix (1 : 6 ) Outer Wall

6 mm cement plaster to ceiling of mix : 1:4(1 cement: 4 coarse sand)

Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade. New Work (three or more coat)

Providing and fixing M.S. Fan clamp type 1 of 16 mm dia M.S. Bar bent to shape with hooked ends in R.C.C. Slab during laying including painting the exposed portion of loop all as per standard desing complete.

Painting on steel surface grill with synthetic enamel paint of approved brand and manufacture of required colour to given an even shade new work (Two or more coats) including a coat of approved steel primer but excluding a coat off mordant solution.

Providing and fixing aluminium sliding door bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete:

Providing and fixing aluminium handles, ISI marked, anodised (anodiccoating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, withnecessary screws etc. complete: 125 mm

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Single rubber stopper

Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc. complete .

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

Providing and fixing aluminium tee channels (heavy duty) with rollers & top end in pelmets as curtain rod.

Providing and fixing bright finished brass· casement window fastener with necessary screws etc.complete.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrouth framed and fixed in postion sal wood.

Providing and fixing flush door shutters decorative type core of block board construction with frame of 1st class hard wood and well matched teak ply veneering with vertical grains or cross bands and face venears on both faces of shutters 35 mm thick including stanless steel.

Providing and fixing of steel glazed doors, windows and ventilators of standra rollet section joint mitered and welded with 15x3 mm lugs 10 cm long with steel lugs embedded in cement concrete block 15 x 10 x 10 cm of 1:3 : 6 (1 Cement 3 coarse sand 6 graded stone aggregate 20 mm nominal size or with wooden pluge and screws or rewl pluge and screws or with fixing clips or with bolts and nuts as required including providing and fixing or glass panes with glazing clips and special coast of approved steel primer, excluding the cost of metal beading and other fitting except necessary hinges or pivots

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give and even shade two or more coats on new work over an under coat of suitable shade with ordinary pain of approved brand and manufacture

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness sqm 799.40 to be specified by the manufacturer) of ist quality conforming to IS :15622 of approved make in colours such as white , Ivory , Grey , FumeRed , Brown, laid on 20 mm thick Cement motar 1:4 (1 cement: 4coarse sand) including pointing the joints with white cement and matching pigment etc., complete.

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS:15622 (Thickness to be specified by them anufacture )of approved make inall colours, shades except burgundy, bottle green ,black of any size as approved by Engineer-in-charge in skirting, risers of steps and dadosover 12mm thick bed of cement Motar 1:3(1cement: 3 coarse sand) and jointing with greycement [email protected] includingpointing inwhitecementmixedwithpigment ofmatching shade complete.

Providing and laying vitrifed floor tiles in different sizes {thickness to bespecified by the manufactruer) with water absorption's less than 0.08 % and conforming to IS : 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand ) including grouting the joint with white cement and matching pigments etc., complete. Size of Tile 60x60 cm

Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m (All kind of soil)

Earthwork in rough excavation , banking excavated earth in layer not exceeding 20 cm in depth, breaking clods watering, rolling each layer with1/2 to nnerollerorwoodenorsteel rammersandrollingevery3rdandtopmost layer with power roller of minimum8 tonnes and dressing up inembankments for roads, floodbanks ,marginal banksandguidebanksorfilling up ground depressions. lead upto 50 m and lift upto 1.5 m.(All kind of soil)

Making25cm(10")diaboreupto4mtrdepthbelowgroundwithhandaugerofapprovedqualityinordinarysoi!(videclassificationofsoilitemA)truetoplumbandwithout eccentri city in any stage of operation anddisposalof theexcavatedearthupto50mtr ,Leadineludingalllifts,allcompleteasperapproveddisignanddirectionofE/lDetailsofcostfor4pilesof4m=16mtrsdepth )

Bankingexcavatedearthinlayersnotexceeding20cmindepth,breaking clods,watering.rollingeach layerwith1/2tonneroller, orwoodenorsteel rammers, and rollingevery 3rd and top-most layer withpower roller of minimum8 tonnes and dressing up ; in embankments for roads, flood banks,marginal banks,andguidebanksetc. leadupto50mandliftupto 1.5 m.(All kind of soil)

Providing designation 100 A one Brick Flat Soling joints Filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/l

Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete.

Providing and laying in PCC of specified grade exiuding the cost of centring and shuttering-all work - 1:1.5:3 (Cement :1.5 coarse sand :3) graded stone aggregate ( 20 mm nominal size)

Providing and laying in position machine batched,machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding thecost ofcentring, shuttering finishing and reinforcement, M-20 grde reinforcd cement concrete Beams, planth beams,girders, bressumers, contilevers, Suspended floors lintels roofs and staircases including spiral staircases, shelves etc.

Providing and laying in position machine batched,machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding thecost ofcentring, shuttering finishing and reinforcement, M-20 grde reinforcd cement concrete Beams, planth beams,girders, bressumers, contilevers, Suspended floors lintels roofs and staircases including spiral staircases, shelves etc.

Providing and laying in position machine batched,machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding thecost ofcentring, shuttering finishing and reinforcement, M-20 grde reinforcd cement concrete Beams, planth beams,girders, bressumers, contilevers, Suspended floors lintels roofs and staircases including spiral staircases, shelves etc.

Centring and shuttering including strutting,propping etc. and removal of form for.Lintels, beams, plinth bams, griders, bressumers and contilevers.

Centring and shuttering including strutting, propping etc. and removal of form for. Columns,Pillars, Piers, Abutments, Posts and Struts.

P/V to 100A B/W in foundection in (1:6) cement, K.sand. Extra for half Brick masonry in superstructure above pinth level upto floor V level. - do.do. All comp..job

Brick work with flyash bricks as per IS 12894 (2002) & S3495 infoundations and plinth in : Cement mortar 1.:4 (1 cement: 4 coarse sand )

Steel work in built up tubular (round, squareor rectangular hollowtubes etc.)trusses etc., including cutting, hoisting, fixingin position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete Hot finished welded type tubes

Providing corru gated G.S. sheet roofing including vertical / curved surface fixed with polymer coated Jor L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washersor with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on over lapping of sheets complete (upto any pitchinhorizontal/vertical or curved surfaces), excluding thecost of purlins, raftersand trussesandincluding cutting to size and shape wherever required. 0.8mm thick with zinc coating not less than 275 gm/mz

Providing and fixing15cm wide45 cm over all semi circularplainG.S.sheet gutter withiron brackets 40x3mm size bolts,nuts and washers etc. includingmaking necessary connections with rain water pipes complete. 0.80 mm thick with zinc coating not less than 275 gm/m2

Neat cement punning

Cement plaster skirting(upto30cmhieght) with cement mortar 1:3(1 cement:3 coarse sand) finished with a floating coat of neat cement. 18 mm thick

Steel work in built up tubular (round, squareor rectangular hollowtubes etc.)trusses etc., including cutting, hoisting, fixingin position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete Hot finished welded type tubes

Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade: New steel work (two or more coats)

Providing and laying factory made chamfered edge Cement Concrete paver blocks of required strength,thickness & size/shape, made by table vibratory method , to attain superior smooth finish using PU or equivalent moulds, laid in required Grey colour & pattern over 50mm thick compacted bed of coarse sand, compacting and proper embedding / laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with jamuna sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand in footpath, parks,lawns, drive ways or light traffic parking etc. all complete as per manufacturer’s specifications & direction of Engineer -in-Charge: 80mm thick M35 grade Paver Block.

SITE CLEARANCE

Making .25 mm dia bore upto 2.43 mt deep ….do……all complete job

63 CM (25) UNDER-REAM making 63 cm dia

Providing RCC in Pile(1:1.5:3)……do…..all complete

Earth work in Excavation in Fdn. trenches in ordinary soil…..do…all complete job.

Providing Coarse Clean Sand Filling in Fdn…do…all comp.job

Providing desigination 100A

Providing desigination 100A B W in copping (1:6) do-do---- all complete job on wall

Providing 100A B W in copping (1:4) do-- all complete job on wall

Providing R.C.C. M15 mix with nominal mix 1:1.5:3 in Grade-Beam and chips 20mm to 6mm down graded

Providing RCC M150 in beam do-do---- all complete job on wall

Providing R.C.C M 20(1:1.5:3) in Stiffner, do…...all complete job

Providing 12mm thick cement plaster with 1:6 cement morter

Providing Earth work filling leveling & dressing do.do all …..

Providing three coats of colour washing do……..all complete job

Providing Primer one coat of Red lead paint of approved make over steel surface

Providing two coats synthetic enamel paint over a coat of primer on steel work

Providing reinforcement in all complete job.

Shuttering & Deshuttering

Shuttering & Deshuttering

Earth work in excavation in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan) including dressing of side sand ramming of bottoms, lift upto 1.5m . including getting out the excavated soil and disposal of surplus excavated soil as directed, with in a lead of 50 m.

Providing designation 100 A one Brick Flat Soling joints Filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/l

Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete.

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring,shuttering,finishing and reinforcement-All work puto plinth level m20 (1:1/2:3) K.sand, stone chips do.do all comp..job

Centring and shuttering including strutting,propping etc. and removal of form for. Foundations, footings, bases of columns etc. for mass concrete.

Centring and shuttering including strutting,propping etc. and removal of form for. Foundations, footings, bases of columns etc. for mass concrete.

Centring and shuttering including strutting,propping etc. and removal of form for. Foundations, footings, bases of columns etc. for mass concrete.

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars TMTC-500-10mm dia.

Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m

Excavation work in foundation trenches or drains not exceeding 1.5 m in width or 10 sq.m on plan including dressing of sides and ramming of bottoms lift upto 1,5m, including getting cut the excavated soil and disposal of surplus excavated soiis as directed, within a lead of 50 m .

Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level

Providing and laying in position machine batched ,machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grde reinforcd cement concrete Cement concrete grade M-20 (Nominal Mix) with 20 mm maximum size of stone aggregate.

Reinforcement forR.C.C.work including straightening,cutting,bending, placing in position and binding all complete.IS : 13920; IS 456 & SP : 34) etc. complete.

Brick work with fly ash bricks asper IS12894(2002)&IS3495in foundations and plinth , Cement mortar 1.:4 (1 cement: 4 coarse sand )

Half Brick masonry with open bhatta of class designation 25 in super structure above plinth level upto floor 2 level including the cost of scaffolding

12 mm cement plaster of mix 1:4 ( 1 cement: 4 fine sand)

Suspended floors, roofs, landings, balconies and access platform.

RAINWATER HARVESTING, RECYCLE AND REUSE OF WASTE WATER (Excavation for 110mm)

Point wiring in PVC conduit, with piano type switch wiring for light point for point, exhaust fan point call be point with 1.5 sqm mm FR PVC insulated copper conductor single core cable in surfact/recessed PVC conduit with paino type switch phenolic laminatied shee, suitable size PVC/G.I. box etc. as required all complete as per secification and direction of E/I Group - c

Circuit/ submain wiring in PVC conduit wiring for circuit/ submajn wiring along with earth wire with following sizes PVC. Insulated aluminium conductor, single core cable in surface/ recessed PVC conduit as required all complete as per specification and direction of E/I 4 x 2.5 sqm + 1 x 2.5 sqm earth wire.

Circuit/ submain wiring in PVC conduit wiring for circuit/ submajn wiring along with earth wire with following sizes PVC. Insulated aluminium conductor, single core cable in surface/ recessed PVC conduit as required all complete as per specification and direction of E/I 4 x 6.0 sqm + 1 x 6.0 sqm earth wire.

Circuit/ submain wiring in PVC conduit wiring for circuit/ submajn wiring along with earth wire with the following sizes PVC. Insulated copper conductor, single core cable in surface/ recessed PVC conduit as required as per specification and and direction of E/I. 4 x 10.0 sq.mm + 1 x 6.0 sq.mm earth wire.

Circuit / Submain wiring in PVC conduit Wiring for circuit / submian wiring along with earth wire with the following sizes PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required as per specification and direction of E/I. 2 x 40 sq.mm + 1 x 4.0 sq.mm earth wire.

S/F Ceiling rose : Supply and fitting 2 pin 5 amp Ceiling rose on the existing junction box / PVC box including connection etc. As required all complete as per secification and direction of E/I.

S/F Ceiling rose : Supply and fitting 2 pin 5 amp Ceiling rose on the existing junction box / PVC box including connection etc. As required all complete as per secification and direction of E/I.

S/F Batten holder : Supplying and fixing batten/ angle holder including connection etc. As required all complete as per specification and direction of E/I.

Supplying and fixing metal/ PVC box of 180 mm x 100 mm x 60 mm deep (mominal size) on surface or in recess with suitable size of phenolic iaminated sheet coven in frnt including providing and fixing 6 pin, 5/6 amps socket outlet and 15/16 amps piano type switch, connections painting etc. all required all complete as per specification and direction of E/I.

S/F power plug pint with piono type accessories : Supplying and fixing suitable size G.I box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin, 15/16 amps socket outlet and 15/16 amps piano type switch connection painting etc. all required all complete as per specification all direction of E/l.

S/F Modular type electronic fan regulator : Supplying and fixing stepped type electronic fan regulator on the exiting modular plate switch box including connection but excluding modular plate etc as requared as per specification and direction of E/l.

lnstallation, testing and commissioning of ceiling fan, including wiring the down rods of standard lengjth ( upto 30 cm ) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

S/F Vertical type TP MCB DB : Supplying and fixing following way three pole and neutral, sheet steel, MCB distribution board 415 volts, on surface/ recess complete with tinned copper busbar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection phosphatized and power painted including earthing etc. as required (BUt without MCB/ RCCB/ Isolator) all complete as per specification and direction of E.l. 4 way (4 + 12) double door, vertical type,

S/F TP MCB DB : Supplying and fixing following way, three pole and neutral, sheet steel, MCB distribution board 415 volts on surface/ recess complete with tinned copper busbar, neutral busbar, earth bar din bar detachable gland plats interconnection phosphatized & power painted including earthing etc. as required (But without MCB RCCB / Isolator) all complete as per specification and direction of E/l 4 way (4 + 12) double doore, horzonatal type.

S/F 'C' series SP MCB : Supplying and fixing following ratin 240 volts, 'C' series, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections testing and commissioning etc. As required all complete as per specification and direction of E/l 50/63 amps TPN.

S/F DP MCB isolator : Supplying and fixing following rating double pole. 240 volts isolator in the existing MCB DB complete with connection testing and commissionig etc. As required as per specification and direction of E/l. 40 amps.

S/F porcelain fuse unit : Providing and fixing flollowing capacity porcelain fuse link complete. Rewireable type 240/415 volts including drilling holes in board making connection as required ad per specification and direction of E/l. 32 amps 240 volt.

S/F Busbar chamber : Providing and fixing following capacity busbar chamber with 4 stricps of suitalbe size made of copper, heavy duty, complete with all accessories including connection earthing the body etc. As required all complete as per specification and direction of E/l. 400 amps.

S/F Busbar chamber : Providing and fixing following capacity busbar chamber with 4 stricps of suitalbe size made of copper, heavy duty, complete with all accessories including connection earthing the body etc. As required all complete as per specification and direction of E/l. 200 amps.

S/F MCCB in cubicle panel board : Providing and fixing follwoing reating and copacity four pole MCCB in existing panel board. Including drilling holes in cubicla panel maleinrg connection etc. As required all complete as per specification and direction of E/l. 200 amps 36 KA

S/F ON - load / panel mounted changeover : Providing and fixing following capacity 4 pole ON - load/ panel mounted change voer switches in existing cubicle panel board, making connection earthing the body etc. As required all complete as per specification and direction of E/l 40 amps 4 pole.

S/F Panel mounted TP & N in cubicle panel board : Providing and fixing following capacity TP & N disconnector fuse switch unit inside the existing cubicle panel board, with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc, as required all complete as per specification and direction of E/l. 200 amps TP & N

P/F M.V. Danger notice plate : Providing and fixing M.V. Danger notice plate of 200 mm x 150 mm made of mild steel at least 2 mm thick and vitreous enamelled white on both sides, and with inscription in single red colour of front side etc. As required all complete as per specification and direction of E/l.

Supplying and fixing wall / floor mounted cubical panel board fabricated with 16 guage iron sheet, suitable for panel mounted swtich disconnector, including bus- bar chamber insulator and painting etc. Required (but without busbar copper striop) as per secification and direction of E/l.

S/F rewireable double pole / TP & N switch disconnector : Providing and fixing following capacity double pole / TP & N sheet metal switch disconnector fuse unit in existing metal board with rewireable type fuses, including drilling holes in metal board, making connections etc. as required all complete as per specification and direction of E/l. 16 amps double pole.

S/F rewireable double pole / TP & N switch disconnector : Providing and fixing following capacity double pole / TP & N sheet metal switch disconnector fuse unit in existing metal board with rewireable type fuses, including drilling holes in metal board, making connections etc. as required all complete as per specification and direction of E/l. 32 amps. double pole.

Supply of following sizes and core PVC/XLPE insulated, PVC sheathed (heavy duty) armoured electrical power cable with aluminium conductor for working voltage upto 1.1 KV as required. 150 sq.mm 3.5 core

Supply of following sizes and core PVC/XLPE insulated, PVC sheathed (heavy duty) armoured electrical power cable with aluminium conductor for working voltage upto 1.1 KV as required. 185 sq.mm 3.5 core

G.l. Earth pipe electrodde with salt/ charcoal : Earthing with G.L. Earth pipe 4.5 mtr long. 40 mm dia including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. With charcoal and salt etc. as required all complete as per specification and direction of E/l.

G.l. Earth plate electrode : Earthing with G.L. Earth plate 600 mm x 600 mm x 6 mm thck including accessories and providing masonary enclosure with over plate having locking arrangement and watering pipe etc. as required (But without charcoal or cole and salt) all complete as per specification and direction of E/l.

P/F 25 mm x 5 mm copper strip in pipe : Providing and fixing 25 mm x 5 mm copper stric in 40 mm dia G.l. Pipe from earth electrode as required all complete as per specification and direction of E/l.

S/F SPN RCCB : Supplying and fixing following rating double pole, (single phase and neutral) 240 volts, residual current circut breaker (RCCB) having a sensitivity current upto 30 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required all complete as per specification and direction of E/l. 25 amps.

P/F 4 mm copper loop earthing wire in surface/ recess : Providing and fixtting 4.00 mm dia copper wire on surface or in recess for loop earthing as required all complete as per specification and direction of E/l.

Jointing copper / G/l. Type (with another coper / Gl. Tape. Base of the finial or any other metallic object) by reverting / nut bolting sweating and soldering etc. As required all complete as per specification and direction of E/l.

Supplying G.l pipe (32 mm dia) medium class G.l. Pipe for ranging lighting luminaire and ceilling fand etc. As required as per specification and direction of E/l. Rate with GST &CPOH

ITC Ceiling fan : Installation testing and commissioning of celilng fan, includind wiring the down rods of standard length (upto 30cm) with 1.5 sq. Mm FR PVC insulated copper conductor single cable etc. As reqed all complete as per specification and direction of E/l.

ITC exhaust fan upto 450 mm sweep : Installation of exhuast fan upto 450 mm sweep in the existing opening including including making the hole to suit the size of the above fan making good the damage connection testing commissioning etc. As required as per specification and direction E/l.

Numbering of fan/ fittings Numbering of ceiling fan/ exhaust / fan / fluorecent fittings as required as per specification and direction of E/l.

300 mm sweep A.C. Exhaust fan / freashair fan of Model Ventil ir DS Havels make Equivalent etc. All complete as per specification and direction of E/l.

Supply and installation of regular/standard model A.C ceiling fan of 1200mm sweep including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm FR PVC insulated copper conductor etc as required

Supply and installation of regular/standard model A.C ceiling fan of 1200mm sweep including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm FR PVC insulated copper conductor etc as required

S/F Following type lamp : Supplying and fixing following type lamp in existing electrical fitting / fixtures etc. As required as per specification and direction of E/l 20 watt LED lamp.

S/F following way rewireable type D.B. : Providing and fixing flollowing way sigle pole porcelain rewireable type 16 amps per way 240 volts. On surface/ recessed, on suitable size PVC / G.l box with phenolic laminated sheet complete with porcelain fuse link nterconnection and earthing the body etc. as required as per specification and direction of E/l. 2 way.

Supplying and fixing 2'X9 watt LED batten with minimum efficacy 100 lm/w in polycarbonate housing and complete with integrated electronic driver etc directly on wall/ ceiling including connections with 1.5 sq.mm FRLS PVC insulatedcopper conductor etc. as required.

Supplying and fixing recess mounted 36 watt LED flatpanel (2' X 2') with minimum efficacy 100 lm/w which privides soft light and glare free symmetrical illuminationsuitable for armstrong/grid ceiling and integrated electronic driver etc directly on false ceiling including connectionswith 1.5 sq.mm FRLS PVC insulated copper conductor cable etc as required..

S/F flollowing type lamp : Supplying and fixing following type lamp in existing electrical fitting / fixtures etc. As required as per specification and direction of E/l. 20 watt LED lamp

S/F flollowing type lamp : Supplying and fixing following type lamp in existing electrical fitting / fixtures etc. As required as per specification and direction of E/l. 20 watt LED lamp

Air Conditioner of capacity 1.3 to 1.7 TON

Supplying and fixing 40/45 watt LED street light due cast aluminium housing for ingress protection of IP66 and complete with all asscessories etc. On pole/ building including connection with FR insulated copper conductor cable and earthing the body etc. as per required as per specification and direction of E/l.

Boring/drilling borewell of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I) including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job,all complete as per directionofEngineer-in-charge, upto 90 metre depth below ground level (All types of soil)

Supplying, assembling, lowering and fixing invertical position inborewell, unplasticized PVC medium well casing(CM) pipe of required dia, conforming to IS:12818, including required hire and labour charges, fittings & accessories etc.allcomplete, for all depths,as per direction of Engineer -in-charge

Supplying, assembling, lowering and fixing invertical position in borewell unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire& labour charges, fittings & accessories etc.allcomplete, for all depths, as per direction of Engineer-in-charge 100 mm nominal size dia

Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement,all complete as per direction of Engineer-in-charge.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes fo rinlet, outle tand overflow pipes but without fittings and the base support for tank.

Development of tubewell in accordance with IS:2800(part I) and IS:11189, to establish maximum rate of us able water yield with out sand content (beyond permissible limit), with required capacity air compressor, running he compressor for required time till well is fully developed ,measuring yield of well by"V" not chmethodor any other approved method,measuring static level & drawd own etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete,including hire & labour charges of air compressor, tools & accessories etc.,all as per requirement and direction of Engineer-in-charge

Providing and fixing suitable size threaded mild steel capor spot welded plate to the to pof bore well housing/casing pipe, removable as per requirement, all complete for borewell Of 150 mm dia

Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 150 mm dia

Providing and fixing Bail plug/Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I) 100 mm dia

Establishment of 1.0 HP submersible pump set with all fittings (rate analysis attached)

Providingand fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot &coldwater supply, includingall CPVC plain & brass threaded fittings, including fixing the pipe with clampsat1.00 m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 32 mm nominal bore.

Providing and fixing water closet squatting pan (Indian type W.C. Pan) with 100 mm sand cast iron P or S trap, 10 litre low level white PVC flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231 with all fitting and fixtures complete including cutting and making good the walls and floors wherever required white vitreous china orissa pattern W.C. pan of size 580 x 440 mm with integral type foot rests etc. complete job as per building specifications and direction of E/l.

Providing and fixing water closet squatting pan (Indian type W.C. Pan) with 100 mm sand cast iron P or S trap, 10 litre low level white PVC flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231 with all fitting and fixtures complete including cutting and making good the walls and floors wherever required : Stainless steel AISI 304 (18/8) Orissa pattern W.C. pan of size 582 x 480 mm with flush pipe and intergrated pype foot rests etc. complete job as per building specification and direction of E/l.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430 x 240 x 350 mm and 340 x 410 x 265 mm sizes respectively with automatic flushing cistern with standrad flush pipe and C.P. Brass spreaders with brass union and G.l clamps complete. including painting of fittings and brackets, cutting and making good the walls and floors wherever required : Range of Two urinal basins with 5 litre white PVC automatic flushing cistern etc. all complete as per specification and direction of E/l.

Providing and fixing one piece constrution white vitreous china squatting plate with an integral longitudinal fiushing pipe white PVC automatic flushing cistern, with fittings standard size G.l. / PVC flush pipe for back and front flush with standrd spreader pipes with fittings G.l. clamps and C.P. brass coupling complete including painting of fittings and cutting and making good the walls and floors etc. wherever required : Single squatting plate with 5 liter PVC automatic flushing cistern etc. all complete job as per specification and direction of E/l.

Providing and fixing wsh basin with C.l. Brackets 15 mm C.P. Brass pillar taps 32 mm C.P. Brass waste of standard pattern, including painting of fittings and brackets cutting and making good the walls wherever require : White Vitreous China Wash basin size 550 x 400 mm with a pair of 15 mm C.P. brass paillar taps etc. all complets as per specifications and direction of E/l.

Providing and fixing G.l. Intel connection for flush pipe connecting with W.C. Pan etc. All complete as per specification and direction of E/l.

Providing and fixing 600 x 120 x 5 mm glass shelf with edges round off supported on anodised aluminium angle frame with C.P. Brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc. All complete job as per specification and direction of E/l.

Providing and fixing mirror of required shape and size with plastic molded frame of approved make and shade with 6 mm thick hard board backing Oval shape 45 x 350 mm (iouter dimensions) etc. All complete job as per specification and direction of E/l.

Providing and fixing mirror of required shape and size with plastic molded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 1500 x 450 mm etc. all complete job as per specification and direction of E/l.

Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings semi rigid pipe 40 mm dia etc. Complete job as per building specification and direction of E/l.

Cutting chases in brick masonry walls for following diameter sand cast iron / centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 (1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size) including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse sand) : 100 mm dia.

Providing and fixing PTMT waste coupling for wash basin and sink of approved quality and colour Waste coupling 38mm dia of 83 mm length and 77 mm breadth, weighing not less than 60 gms etc. All complete as per specification and direction of E/l.

Providing and fixing PTMT liquid soap container 109 mm wide 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour weighing not less than 105 gms etc. All comlete job as per specification and direction of E/l.

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long 200 mm wide with a minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality, colour and make weighting not less than 88 gms etc. All comlete job as per specification and direction fo E/l.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass cerews with concealed fitting arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective heigth of 88mm weighing not less than 190 gms.

Providing and fixing PTMT 15 mm Urinal spreader size 95 x 69 x 100 mm with 1/2'' BSP thread and shapes as per BIS specification weighting not less than 60 gms etc. All complete job as per specification and direction of E/l.

Providing and fixing on wall face unplasticised PVC (working pressure 4 kg per sqcm) rain water pipes conforming IS 4985 including joiting with seal ring conforming to IS : 5352 leaving 10 mm gap for thermal expansion. 75 mm diameter all complete as per building specifications and direction of E/l.

Providing and fixing on wall face unplasticised PVC moulded fittings / accessories for unplasticised PVC rain water paipes conforming to IS 4952 including joiting with seal ring conforming to IS : 5352 leaving 10 mm gap for thermal expansion Couplet 110 mm all complete as per building specifications and direction of E/l.

Providing and fixing on wall face unplasticised PVC moulded fittings / accessories for unplasticised PVC rain water paipes conforming to IS 4952 including joiting with seal ring conforming to IS : 5352 leaving 10 mm gap for thermal expansion Single pushfit couplet 110 mm all complete as per building specifications and direction of E/l.

Providing and fixing on wall face unplasticised PVC moulded fittings/ accessories for unplasticised PVC rain water pipes conforming to IS : 4985 including jointing with seal ring conforming to IS 5382 leaving 10 mm gap for thermal expansion Single tee with door 110 x 110 x 110 mm all complete as per building specification and direction of E/l.

Providing and fixing on wall face unplasticised PVC moulded fittings/ accessories for unplasticised PVC rain water pipes conforming to IS : 4985 including jointing with seal ring conforming to IS 5382 leaving 10 mm gap for thermal expansion Single tee with door 110 x 110 x 110 mm all complete as per building specification and direction of E/l.

Providing and fixing on wall face unplasticised PVC moulded fittings/ accessories for unplasticised PVC rain water pipes conforming to IS : 4985 including jointing with seal ring conforming to IS 5382 leaving 10 mm gap for thermal expansion Band 87.5 110 mm all complete as per building specification and direction of E/l.

Providing and fixing on wall face unplasticised PVC moulded fittings/ accessories for unplasticised PVC rain water pipes conforming to IS : 4985 including jointing with seal ring conforming to IS 5382 leaving 10 mm gap for thermal expansion Shoe Plain 110 mm all complete as per building specification and direction of E/l.

Providing and fixing unplasticised PVC pipe clip of approved design to uplasticised PVC pipe clip of approved design to unplasticised PVC rain water pipe by means of 50 x 50 mm hard wood plugs screwed with M.S. Screws of required length including sutting brick work and fixing on cement mortar (1:4) 1 cement : 4 coarse sand and making good the wall etc. 110 mm all complete as per building specifications and direction of E/l.

Providing and fixing G.l. Pipes complete with G.l. Fittings including trenching and refilling etc. Complete job as per building specification and direction of E/l. External work 25 mm dia nominal bore.

Providing and fixing G.l. Pipes complete with G.l. Fittings including trenching and refilling etc. Complete job as per building specification and direction of E/l. External work 32 mm dia nominal bore.

Providing and fixing polyethelene Aluminium polythelenene (PE-AL-PE) Composite Pressure Pipes Conforming to IS - 15450 U.V. Stabilized with carbon black thermal stabillty for hot & cold water supply, capable to withstand temperature up to 800 c including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc. with clamps. at 1.00 metre spacing This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge. Concealed work including cutting chases and making goo the wall etc. 1216 ( 16mm OD) pipe.

Making connection of G.l. Distribution branch with G.l. Main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. Complete job as per building specification and direction of E/l. 25 to 40 mm nominal bore.

Providing and fixing uplasticised PVC connection pipe with brass unions 45 cm lenght 15 mm nominal bore 20 mm nominal bore etc. All comlete as per building specification and direction E/l.

Providing and fixing C.P. Brass long nose bib cock of approved quality conforming to IS standars and weighing not less than 810 gms. 15 mm nominal bore etc. All complete as per building specification and direction of E/l.

Providing and fixing C.P. Brass Stop cock of (concealed) of standard design and of approved make conforming to IS 8931 . 15 mm nominal bore etc. all complete as per building specification and direction of E/l.

Providing and fixing PTMT pillar cock of approved quality and colour. 15 mm nominal bore 125 mm long foam flow weighing not less than 120 gms etc. All complete as per building specification and direction of E/l.

Providing and fixing PTMT grating of approved quality and colour. Circular type 125 mm nominal dia with 25 mm waste hole. Etc. All complete as per building specifications and direction of E/l.

Providing and fixing ball valve (brass) of approved quality high or low pressor, with plastic float : 20 mm nominal bore etc. All comoplete job as per technical specifications and direction of E/l.

Providing and placing on terrace (at all floor levels polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittngs and the base support for thnk etc. all complete as per building specifications and direction of E/l.

Painting G.l. Pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat both of approved quality for new work 25 mm diameter pipe etc. All complete as per building specifications and direction of E/l.

Painting G.l. Pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat both of approved quality for new work 32 mm diameter pipe etc. All complete as per building specifications and direction of E/l.

Providing and fixing asbestos cement roofing accessories with galvanicse iron J or L hooks, bolts and nuts and G.L. Seam bolts and nuts, G.l. Plain and bitumen washer Ridge finials etc. All complete as per building specification and direction of E/l.

Providing and fixing aluminium tee channels (heavy duty) with rollers & stop end in pelmets as curtain rod as per building specification and direction of E/l.

Structural steel work in singla section fixed without connecting plate including cutting,hoisting fixing in position and applying a priming coat aproved steel primer all complete as per building specifications and direction of E/l.

Providing and fixing PVC rigid foam sheet 1 mm thick on existing door shoutters (bathroom and W.C. Doors.) using synthetic rubber based adhesive as per building specifications and direction of E/l.

Supplying of 65 mm x 55 mm x 2 mm thick Factory made door frame of PVC extruded section in white grey or wooden finish all complete as per approved specification and direction of E/l. (Rate with GST &CPOH)

Providing and fixing stainless steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. Brackets and stainless steel plug 40 mm including painting of fittngs and brackets, cuttng and making good the walls wherever required Kitchen sink with drain board : 510 x1040 mm bowl depth 250 mm etc. all complete as per specifications and direction of E/l.

(ii) K. Sand

(iii) S. Chips

(iv) Brick

(v) L. Sand

(vi) Soil Fill

Nagar Vikash Pramandal,

Madhubani

BILL OF QUANTITY

NVP MADHUBANI

NAGAR NIGAM, MADHUBANI