REPAIR AND REPLACEMENT OF AC SHEET, FALSE CEILING, JOINERY AND CONNECTED WORKS IN CERTAIN BLDGS AT PRC AND REPAIR TO ROOFING, CEILING, FLOORING, TILING, PLUMBING, JOINERY, BRICK WORK AND CERTAIN ALLIED WORKS AT MES INSTALLATION IN RAMGARH CANTT

as specified and as directed.
S & F in repair 250 mm long, 16mm dia mild steel sliding door bolt with hasp, staple( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections and fixed complete all as specified and as directed.
M&L for aluminium 250 mm long, 16mm dia sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or aluminium alloy and fixed complete all as specified and directed.
M&L in repairs for aluminium 250 mm long, 16mm dia sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or aluminium alloy and fixed complete all as specified and directed.‚S&F MS ordinary rat tail rod pattern springs 200mm, including roller and roller plate complete all as specified and as directed.†MS in repair ordinary rat tail rod pattern springs 200mm, including roller and roller plate complete all as specified and as directedÀM/L preparation of new wooden surface any description over 10 cm width or girth and applying two coat synthetic enamel paint over a coat pink primer complete all as specified and as directedÌM & L preparation of new steel surfaces any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete all as specified and as directed«
Taking down aluminium doors shutters only (area exc 0.50 sqm but not exc 4.0 sqm each) and dismantling all members and reassembling the same with and including new screws, new rubber gasket, new aluminium beads & cleats of existing make and also refixing the handles & mortice locks in existing position with and including new screws including refixing the door shutters in same opening complete all as specified & directed. 1
S&F 4.80 mm thick plain Sheet glass, area n exc 0.50 sqm in each pane with solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers and fixed to aluminium frame work with required EPDM rubber/ neoprene gasket etc complete all as specified and directed. 0
S&F 5.50 mm thick plain Sheet glass, area exc 0.50 sqm in each pane with solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers and fixed to aluminium frame work with required EPDM rubber/ neoprene gasket etc complete all as specified and directed. ¾S&F 4 mm thick ACP board (Aluminium Composite Panel), exterior grade, (approved colour) fixed with aluminum tapperd clip to aluminum frame work etc complete all as specified and directed. ‚
S&F double action floor spring in repairs for aluminium doors hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed including necessary cutting & making good to floor as per existing complete all as specified and directed. õS&F Cast iron Body door closer hydraulically regulated, designation No. 3, universal type, in repairs suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directedæM&L 9mm thick Prelaminated particle board,interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with alumunium frame work complete all as specified and as directed.gS&F 4 lever brass mortice lock vertical type size 65mm long complete all as specified and as directed.ÅSupply only wooden beads of size 10x10 mm to 15X15mm of teak wood Square / triangular in cross section, plain or desiger for fixing of mosquito net jali complete all as specified and as directedöS&F in repairs looking mirror 600x450mm selected quality 5mm thick glass mounted on 6mm ply wood & fixed with brass screw & cup washer with PVC frame in wood finish colour complete all as specified and as directed(As per sample kept in GE office)
S& F Chromium plated Stainless steel tubing of 25 mm bore, 1.00mm wall thickness as in curtain rod including wall fixing brackets, stops etc. complete all as specified & directed. (For the purpose of measurement and payment running length of curtain rod only shall be considered).¢S& F Chromium plated Stainless steel fancy type Decorative finials suitable for 25 mm bore pipe in any shape & colour etc. complete all as specified & directed.…S&F handle/peg stay for steel windows.ventilator including necessary nut & bolts/welding etc. complete all as specified and directed.}Running welding in repairs thickness of metal to be welded exc 6mm but n exc 9mm complete all as specified and as directed {S&F for snack guard of size 35mmX5mm thick fixed with door shutter with nails/screw complete all as specified and directed.
S&F in repair health faucet (ABS body) mild steel chromimum plated sutable for 15mm dia pipe with 1.25 mtr long flaxible tube and ABS wall hook including making connections and fixed in position complete in all respectas specified & directed. (As per sample kept in GE office)¼S&F in repairs looking mirror selected quality 5mm thick glass mounted as in dressing mirror modified type, with PVC frame in wood finish colour complete all as specified and as directedÙS&F in repairs PVC looking mirror cabinet of selected quality with 5mm thick glass mounted of min size 330x460x150mm (As per sample), fixed complete all as specified and as directed.(As per sample kept in GE office)¼S&F in repairs stainless steel Peg set fancy type of six,hat and coat hooks, solid body, not less than 300 mm long complete all as specified and directed.(As per sample kept in GE office)M&L 19 mm thick MDF membrane kitchen cabinets door shutter in wood grain colour,half round edge fixed complete all as specified and as directed–S&F Ball catches with 8mm dia steel ball ,and brass body and striking plate including letting in and fixed complete all as specified and as directed.vS&F auto close hinges ,stainless steel ,bright finish or electrogalvanised complete all as specified and as directed_S&F brass handle of 100mm size type polished bright complete all as specified and as directed©Dismantling of AC/ translucent/GI/Iron any type sheet (corrugated or semi corrugated etc) including ridges as in roof covering complete all as specified and as directed.‘
S&F, 6 mm thick asbestos cement corrugated sheet fixed with  L type or  J type or cranked hook bolts complete all as specified and as directed.±M&L 1.4 mm thick Fibre glass reinforced translucent sheeting in roof, walls etc fixed with L-T type or J-type or cranked hook bolts etccomplete all as specified and as directedý M&L Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directedÝ Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of a colour having tensile strength of 550 Mpa as in redge, fixed with self tapping screws as complete all as specified and as directediDismantling wrought iorn or mild steel work of any description complete all as specified and as directed.s
M&L for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc., and welding counter shunk for holes and necessary gusset plates etc., and similar work conforming to Fe-410-W (Gde E-250 quality A) complete all as specified and as directed.Dismantling of wooden scantling 40sqm and over in section fixed in any position as in unframed work complete all as specified and as directed._M&L for second class hard wood in scantling clean sawn complete all as specified and directed.]Dismantling wall and ceiling board of any description complete all as specified and directed.îRe-fixing only in repair of existing old Non asbestos fibre cement building board, fixed or laid/inserted to timber /GI/Aluminium frame (existing old fram but necessary joint etc.) work with screwcomplete all as specified and as directed.„Demolition of lime/cement concrete (un-reinforced) of any description and in any position complete all as specified and directed.§M&L Cement concrete 1:2:4, type B-1 (using 12.5 mm graded stone aggregate) as in levelling course, coping, window cill etc complete all as specified and as directed.ÆDemolition/ Chipping /removing carefully, reinforced cement concrete as in chullah hoods , Chajjas, roof projection shelves, cover slab and plate form etc complete all as specified and directed ¿M&L for RCC (1:2:4) including necessary form work, Type B 1 using 20mm graded aggregate as in in roof projection drop/ chajjas, incl scaffolding etc, complete all as specified and directed.@
S&F mild steel TMT bars 10mm dia and over cut to length bend to shape required including cranking bending spirally for hooping for columns, hooking and binding with and including mils steel wire (annealed) not less than 0.9 mm dia quality conforming to Fe-410-S or F-410-0 etc complete all as specified and as directed.¢All as per Item No 99 here in before but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directedo
M&L Granite slab 20mm thick machine cut over & including laying/fixing/erection vertically and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing over 15mm thick screed bed in CM 1:4 etc complete all as specified and directed. £Taking down cement plaster on wall of any description incl racking out joints hacking for key and scrubbing down with water complete all as specified and directedDemolition of brick work build in cement mortar including all quoins, arches, pillars, complete all as specified and as directed.˜M&L brick work with sub class 'B' brick straight or curved on plan exc 6m means radius build in cement mortar 1:4 complete all as specified and directed^All as per Item No 104 here in before but except bricks complete all as specified and directedÏM&L 15mm thick rendering on fair faces of bk /concrete surfaces in cm (1:4), finished even and fair (Without using extra cement ) with WPC etc complete all as specified and directed. (WPC will be paid extra)[Supply only liquid integral water proofing compound complete all as specified and directed.‡M&L for preparation of new plastered surface of wall and applying three coat of white wash, etc complete all as specified and directedã M&L for preparation of new plastered wall surface applying "Birla White wall care putty"or" JK Wall Care Putty " 2mm thick in two layer to make the entire surface free from undulations complete all as specified and directedM&L for applying two coats of oil bound distemper over a coat of chalk white primer on surface of walls complete all as specified & directed. €Dismantling tiles/stone slabs of any description or thickness in floor,wall, aprons etc complete all as specified and directed.
M&L machine cut Kota stone slab flooring and in steps 20-25 mm thick over & including 15mm screed base in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding ,rubbing and polishing complete all as specified and directed.‡All as per Item No 112 here in before but as in skirting with 10mm thick rendering in CM 1:3 complete all as specified and directed.§M&L for grinding, rubbing and polishing of kota stone slab flooring and polishing with beeswax polish to obtained mirror finishcomplete all as specified and directed.ZM&L 10mm thick screed bed in CM 1:4 for tiles etc. complete all as specified and directed.*
M&L for colour ceramic tiles (Virified) dark shed, 8-9 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile colour complete all as specified and directed.
M&L for non skid coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc, set & jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified and directed.
M&L for non skid coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc, set & jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified and directed.ZM&L 10 mm thick rendering in CM 1:3 for tiles etc. complete all as specified and directed.ûM&L coloured ceramic glazed tiles 375x250x7mm/ 450x300x7mm thick as in dado/skirting etc , set & jointed in neat cement slurry & pointed in white or coloured cement slurry & pointed in white or coloured cement complete all as specified and directed..ÈM&L brick work with sub class 'B' brick straight or curved on plan exc 6 metres radius with old size bricks in half Brick wall and built in cement mortar (1:4) comlpete all as specified and directed. ²Rendering 10mm thick on brick or concrete surface in Cement mortar (1:4) finishing external surface even and smooth w/o using extra Cement complete all as directed and specified.ÆRendering 10mm thick cement plastering in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed.³M&L for preparing the new plastered surfaces of wall and applying Two coat of cement based paint over a coat of alkali resistant primer comlpete all as specified and directed.
M&L for 75mm thick, PCC 1:3:6, type C-1 using 20mm graded stone aggregate, as in plinth protection , finished even and fair without using extra cement including 10 mm wide grove not exc 3.00 mtr in length , filled the grove with mastic etc complete all as specified and directed .ªM & L 40 mm thick PCC type B-1 1:2:4 using 20 mm graded stone aggregate as in sub base/leveling of floor and finish rough surface complete all as specified and directed.ƒM&L Cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in sub base etc complete all as specified and directed.êM&L for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour (Red &Yellow 50% Each), design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., o frequired strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand;complete all as specified and directed
M&L for antifungal Chequered cement concrete tiles 30cm x 30cm x 22 to 25mm thick with grey cement and pigment (Red &Yellow 50% Each) over & including 10mm thick screed bed in CM 1:6, set, jointed and pointed in neat cement slurry in floors complet, complete all as specified and directedxM&L for 100mm thick cement concrete type B- 1, 1:2:4 (20mm graded aggregate) complete all as per specified and directed.¡M&L preparation of old steel surfaces of any description over 10 cm width or girth and applying onecoats of synthetic enamel paint all as specified and directed.˜M&L preparation old surface of wood of any desc over 10cm width or girth and applying one coats of synthetic enamel paint all as specified and directed.
M&L for aluminium 300 mm long, 16mm dia, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or aluminium alloy and fixed complete all as specified and directed.ÜS&F in repairs looking mirror of size 1200x450mm selected quality 5mm thick glass mounted on 6mm ply wood & fixed with brass screw & cup washer in PCV frame with wood finish colour complete all as specified and directed.uS&F Aluminium anodised door stopper with rubber shoes of size min 150mm long complete all as specified and directed..`S & F 150mm long aluminium handles cast type, anodised complete all as specified and as directedýMaterial and labour for vitreous china ,squatting pan Orissa pattern size 580x440mm white with integral foot rest including connection as directed including taking down old pan and making good disturbed surfaces complete all as specified and directed.<
Material and labour for vitrous china wash down water closet, pedestal pattern Pedestal pan and trap, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, jet spray/health fauset etc.and incl seat and cover for pedestal pan as in repairs complete all as specified and directed.ÊS&F wash hand basin vitreous china size 580x450 mm white flat back with pedestal as approved by GE ,incl 32mm dia waste cupling and pvc waste pipe etc. in repair complete all as specified and directed.ØDisconnecting existing tanks, of any size , setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed.bDismantling existing tanks, of any size (500 to 1000 Ltrs) complete all as specified and directed.ÝS&F 500 Ltrs capacity rotational moulded polythene water storage tanks in two layer cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I complete all as specified and directed.…S&F PVC ball valve 15mm dia with epoxy coated aluminium rod and high density ball (minimum weight 142 gms) complete as directed . ÝS&F 1000 Ltrs capacity rotational moulded polythene water storage tanks in two layer cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I complete all as specified and directed.…S&F PVC ball valve 20mm dia with epoxy coated aluminium rod and high density ball (minimum weight 210 gms) complete as directed . …Taking up or steel tubing & connections including cleaning for refixing bore of pipe 15mm etc complete all as specified and directed  S&F tubes medium grade galvanised with all fittings & fixed complete to walls & ceiling or laid in floors 15mm bore etc complete all as specified and directed mRefixing old galvanised steel tubes & connections on wall 15 mm bore complete all as specified and directed .œS&F in repair for Gun-metal, globe or gate valves 15mm, with iron wheel head, screwed both ends for iron pipe etc complete all as specified and directed .ãS&F in repair stop valve long shank fancy type 15mm chromium plated screw down, Quarter turn high pressure with capstan heads, screwed both ends for or iron pipe or for unions and fixed complete all as specified and directed.l
S&F in repairs15mm dia pillar tap cast copper alloy cromium plated, fancy type Quarter turn with Swan neck) with mini capstan heads chromium plated screwed down high pressure with or without letered "Hot or Cold" high pressure with long screwed shanks & fly nuts screwed for iron pipe etc complete all as specified and directed.( As per sample kept in GE office)®S&F in repairs 15 mm dia concealed type stop valve long shank fancy type, Quarter turn,with mini capstain head, chromium plated etc complete all as specified and directed. íS&F Bib tap long body cast copper alloy cromium plated, fancy type. Quarter turn, with mini capstain head handle screwed down, screwed for iron pipe and fixed to 15mm bore pipe after taking down of old bib tap complete all as specified. _
S&F in repairs stainless steel sink with drainage board made out of 1.0 mm thick sheet for kitchen with plug washers, waste pipe including bedding in cement mortar on dwarf wall or including cast iron cantiliver brackets connecting union overall size 915 x 460mm with bowl size 410 x 352 x178mm or 405x355x178mm complete all as specified and directed.
S&F Waste fittings, brass, chromium plated for sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed Waste coupling 40mm and waste pipe 40 mm for SINK etc complete & fixed in repairs..( As per sample kept in GE office)k
S&F in repairs15mm dia Sink tap cast copper alloy cromium plated, fancy type,Quarter turn with Swan neck with mini capstan heads chromium plated screwed down high pressure with or without letered "Hot or Cold" high pressure with long screwed shanks & fly nuts screwed for iron pipe etc complete all as specified and directed. .( As per sample kept in GE office)dS&F in repair PVC connection 450mm long with two PTMT nuts complete all as specified and directed .ƒS&F CP towel rail in repair, 20mm dia, D type,60cm long complete all as specified and directed ..( As per sample kept in GE office)zS&F Glass shelf assembly fancy type with SS railing 150mm wide, 450mm long minimum complete all as specified and directed.žS&F Corner Glass shelf assembly fancy type with SS railing 300mm (Arch Dia) minimum complete all as specified and directed..( As per sample kept in GE office)ŒS&F CP soap dish fixed to plugs with chromium plated brass screws complete all as specified and directed..( As per sample kept in GE office)
S&F in repair for 10 ltrs capacity flushing cistern PVC low level valve less, symphonic action type flushing cistern white with inlet, ball valve, float and handle including brackets and 32 mm flush pipe of polyethylene complete all as specified and directed. ½S&F in repairs Stainless steel Peg set fancy type of six,hat and coat hooks, solid body, not less than 300 mm long complete all as specified and directed.( As per sample kept in GE office)í
Clean existing reinforcement with wire/ rotary wire brush making the surfaces free from loose material dirt etc complete, Applying two coats of alkaline rust converting primer FEOVERT of Krishna conchem or Dr. Fixit equivalent confirming to ASTM-B-117 on the rebars, including cleaning the reinforcement, wire brushing to remove loose rust spalls, with time interval of 6 hour between the coats and applying protective coating IPNET-RB complete all as specified and directed by Engr-in Charge.M&L Carry out application of 'Bi-polar migratory corrosion inhibitor' EPCO-KP-100 or equivalent on concrete surface. This inhibitor has migratory kind of property which permits the material to migrate to a vertual extent of 100mm, through pores of concrete, inhibiting the corrosion and de-passivating the Electro-chemical reaction. It has properly to attack anode as well as cathode, which is purely alkaline in nature (pH-9.5), so it has no carcinogen activity with concrete complete all as specified and directed ..f
M&L for Building up the profile of structural members by using latex additives(MONOBOND) modified air cured mortar system (Polymer modified mortar) (1:5:15 =1-MONOBOND, 5-Cement, 15-Sand) in damaged areas up to 40mm thickness in two layers including leveling profiling etc over suitable bonding mtrl complete all as specified and directed by Engr-in Charge.ÌS&F in repair PVC (SWR) pipes 110 mm single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. ­S&F in repair PVC (SWR) pipes 75 mm single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed .tS&F in repair PVC (SWR) bends for 75mm dia PVC pipes with rubber ring joints complete all as specified and directeduS&F in repair PVC (SWR) bends for 110mm dia PVC pipes with rubber ring joints complete all as specified and directedwS&F in repair PVC (SWR) 110 mm bore junction single, (Single T) equal or unequal complete all as specified and directedyS&F in repair PVC (SWR) 75 mm bore junction single, (Single T) equal or unequal complete all as specified and directed .S&F in repair PVC (SWR) floor trap 75 mm dia plain with grating including jointing with solvent cement complete all as specified and directed .qS&F in repair Grating doom of 100mm dia of CP mild steel (Min wt 25gms) complete all as specified and directed .per leafRMPer LeafEach Jobper PairXCmKGLtrsXSqm(BI01010001010000000000000515BI0100001262(BI01010001010000000000000515BI0100001263(BI01010001010000000000000515BI0100001264(BI01010001010000000000000515BI0100001265(BI01010001010000000000000515BI0100001266(BI01010001010000000000000515BI0100001267(BI01010001010000000000000515BI0100001268(BI01010001010000000000000515BI0100001269(BI01010001010000000000000515BI0100001270(BI01010001010000000000000515BI0100001271(BI01010001010000000000000515BI0100001272(BI01010001010000000000000515BI0100001273(BI01010001010000000000000515BI0100001274(BI01010001010000000000000515BI0100001275(BI01010001010000000000000515BI0100001276(BI01010001010000000000000515BI0100001277(BI01010001010000000000000515BI0100001278(BI01010001010000000000000515BI0100001279(BI01010001010000000000000515BI0100001280(BI01010001010000000000000515BI0100001281(BI01010001010000000000000515BI0100001282(BI01010001010000000000000515BI0100001283(BI01010001010000000000000515BI0100001284(BI01010001010000000000000515BI0100001285(BI01010001010000000000000515BI0100001286(BI01010001010000000000000515BI0100001287(BI01010001010000000000000515BI0100001288(BI01010001010000000000000515BI0100001289(BI01010001010000000000000515BI0100001290(BI01010001010000000000000515BI0100001291(BI01010001010000000000000515BI0100001292(BI01010001010000000000000515BI0100001293TOTAL AMOUNT xS & F 100 mm size Butt hinges medium weight cold rolled mild steel and fixed complete all as specified and as directed..wS & F 75 mm size Butt hinges medium weight cold rolled mild steel and fixed complete all as specified and as directed..ŒS & F in repair Aluminium anodised barrel tower bolts of extruded section and fixed 200 mm long complete all as specified and as directed..‹S & F in repair Aluminium anodised barrel tower bolts of extruded section and fixed 125 mm long complete all as specified and as directed..^S&F piano hinges mild steel bright finish 30mm flap complete all as specified and as directed.‡S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and as directed.þM&L taking down old steel window projecting type by machanical cutter and fixed in same opening by providing box type hinges 02 Nos in each shutter not exc 1.00 sqm and making good , panting to distrubed portion complete all as specified and as directed.i

er ser Item No 81 here-in - before but except sheeting complete all as specified and as directed.“S&F asbestos cement two piece adjustable serrated ridge 6mm thick for corrugated or semi corrugated sheet complete all as specified and as directed M&L for providing aluminium snap Grid frame work for false ceiling with of size 605X605 mm ,using Main and cross tee of size 36.5mmX25mmX1.4mm,weighing 0.24 kg/RM and 23.5mmX26.4mmX1.4mm weighing 0.191Kg/RM respectively. the snap grid shall be supported at end all along the wall with aluminium anodised angle of size 40mmX25mmX2mm weighing 0.36Kg/RM. The snap grid shall be fixed to ceiling supporting hangers consisting of 2mm dia MS wire/GI wire, J bolts, nuts and washers as per manufacturer's complete all as specified.²S&F Non asbestos fibre cement building board 4 mm thick in ceiling fixed or laid/inserted to timber /GI/Aluminium frame work with screw complete all as specified and as directed._All as per Item No 146 here in before but 20mm bore complete all as specified and as directed._All as per Item No 146 here in before but 25mm bore complete all as specified and as directed.PAll as per Item No 149 but 20mm bore complete all as specified and as directed.OAll as per Item No 149 but 25mm bore complete all as specified and as directed.`All as per Item No 152 here in before but 20mm bore complete all as specified and as directed._All as per Item No 152 here in before but 25mm bore complete all as specified and as directed.
NAME OF WORK: : REPAIR AND REPLACEMENT OF AC SHEET, FALSE CEILING, JOINERY AND CONNECTED WORKS IN CERTAIN BLDGS AT PRC & REPAIR TO ROOFING, CEILING, FLOORING, TILING, PLUMBING, JOINERY, BRICK WORK AND CERTAIN ALLIED WORKS AT MES INSTALLATION IN RAMGARH CANTT½Hacking out old boken glass(any thickness, size, quality or description) from wooden frames/steel frames glazed with oil putty or fixed with beads complete all as specified and as directed S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and complete all as specified and as directed.È S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings wt shall be measured/paid separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and complete all as specified and as directed.

S&F in repair for Gun-metal, globe or gate valves 20mm, with iron wheel head, screwed both ends for iron pipe etc comlete all as specified and directed .