Balance work of improvement of Bahroo Nadli Gharchindi Malli road (Portion Nadli to Malli) KM 0/00 to 7/250

Providing and applying tack coat with Bitumen emulsion (RS-I) using emulsion pressure distributor at the rate of 0.225 kg. (zero point two two five kilograms) per Square metre on the prepared bituminious surface treated with primer and cleaned with hydraulic broom as per M.O.R.D. technical specifications section 500 and as per the directions of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals and to the entire satisfaction of the Engineer-in-Charge .The rate includes octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST.

Providing and laying 50 mm (fifty millimetre) thick compacted thickness bituminous macadam with 40 -60 (forty to sixty) tonne per hour hot mix plant producing an average output 50 (fifty) tonne per hour using crushed aggregate of Grading -II 19 mm (ninteen millimetre) nominal size premixed with bitumen binder VG-30 (viscosity grade thirty) at the rate of 3.3% (three point three percent) of mix weight transported to site, laid with paver finisher hydraulic sensor control required grade level and alignment over a previously prepared surface and rolling complete with smooth wheeled roller 8-10 (eight to ten) tonne capacity for initial breakdown rolling and vibratory roller 8-10 (eight to ten) tonne for intermediate and finish rolling with 6-8 ( six to eight) tonne smooth wheeled tandom roller to achieve the desired compaction as per MORTH technical specification section 500 including carriage of materials within all leads, lifts and other incidentals as per entire satisfaction and direction of Engineer-In-Charge. The rate includes octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST.