NIT No. 12 Item No. 4 (22-23) EE (T)/ACE

Horizontal 15 H.P. monobloc water pump set of discharge flow rate-210 to 1710 LPM at 30 to 40 meter head range with C.I. impeller gland packing, sealing C-40 shaft TEFC motor, IP-55 “F”-class insulation Sleeve coupled with 30 HP, 3000 rpm, 3 phase, 415 volt TEFC motor, size of suction & delivery-100x100 mm, mounted on MS base frame with coupling, coupling guard. Make of Pump set: KBL, Lubi, ABB and any approved make of DJB

Casting of RCC foundation of size 0.5 mtr x 1 mtr. x 0.5 mtrs. with the help of Iron Bars & C:C in the ratio 1:1.5:3. The work i/c fixing /grouting of MS foundation nut bolts of suitable size including welding of foundation bolts with the Iron Bars.

Supply of C.I. NRV without bye pass swing type flanged ends of size 100 mm PN 1.0 MAKE: Kirloskar

Supply of C.I. Sluice Valve without bye pass swing type flanged ends of size 100 mm PN 1.0 , MAKE: Kirloskar

Supply of M.S. Flange 100 mm dia. 08 mm thickness

Supply of rubber packing for flange joint as per site requirement.

Supply of good quality nut, bolts with washer of different size.

MCCB 415V, TP 3phase 50Hz,200Amp Breaking capacity 18KA with Rotor handle & Spreader - Make L&T/Siemens

MCCB 415V, TP 3phase 50Hz,100Amp Breaking capacity 18KA with Rotor handle & Spreader - Make L&T/Siemens

MCCB 415V, TP 3phase 50Hz,50Amp Breaking capacity 18KA with Rotor handle & Spreader - Make L&T/Siemens

Digital 3Phase LED Amp. Meter Make AE/L&T

Digital Volt Meter0-500V -Make AE/L&T

On load change over switch 200Amp. In sheet Enclosure execution type Make:L&T

S/o 50mm sq. 3.5 core aluminium armoured cable. Make : Grandley /DJB Approved

S/o 25mm sq. 3 core armoured Copper power cable. Make : Grandley/DJB Approved

Fitting of the above components in panel enclosure with terminal blocks, channels, ferrules, thimble, support insulator on bus bar, required hard wares complete in all respect. Proper matching of bus bars ,links, bends, dressing of existing cable at site ,termination of cable both incoming & out going side through cable gland & thimble in proper way in all respect as per site requirement.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. DSR 2018, 1.10.2

Supply of LED street light 45 W (tolerance of + or - 10%) complete fitting with pressure die cast aluminum housing with IP 66 deg. of protection Make: Havells/Bajaj/Crompton / Philips/ HPL/any other approved make of DJB. DJB SOR(E&M)-19.10.5

Supply of fresh air ventilating fan 300 mm. Make: Havells/Crompton/Bajaj/ Khaitan/Usha. DJB SOR(E&M)-20.2.1

Supply of ceiling fan 1200 mm sweep. Make: Havells/Crompton/Bajaj/ Khaitan/Usha. DJB SOR(E&M)-20.1.2

Wiring for circuit / sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire DSR 2018, 1.14.2

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut,bolt, spring, washer excavation and re-filling etc. as required. Approve rate by DJB

Fabrication and Fixing of Ms sitting Bench of size 6”x24”x18” made of MS material and Wooden blank duly fixed with Nut Bolts over the Top portion as required by job.

Supply of Ceasefire ABC Powder based Fire Extinguisher (MAP 90) - 4 kg/4.5 kg. Range of ABC extinguishers are effective against Class A, B and C fires as well as Electrical fires. DJB SOR 24.1.3 Make: - Life guard/DJB Approved

Packing and transportation charges of the Pump set .This includes shifting of the complete pump set from shop to site and transportation and loading unloading cost done with the help of manual labor.

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. Above 35 sq. mm and 70 sq.mm DJB/SOR 3.7.7.2

Fixing the pump set over the base frame with the help of tools & tackels with the help of heavy labour as per site. Including fixing of Sluice Valve/NRV of existing Suction/delivery Mains with the help of the gas cutter, ,welding M/c including welding rods and other tools & tackels etc. complete in all respect as per site requirement

Testing and commissioning of Pumpset as per required parameters with relevant IS testing of the panel prior to switching on as follows. Continuity and earth testing. Meggaring of all equipments for phase to phase, neutral to body, neutral to earth and phase to earth. Checking for all tightness of nut and bolts. Alignment of doors etc. Interlocking tests. All function tests

paramount systems