GENERAL KLC section2 Running Contract Maintenance and petty repairs sanitary water supply works in Nila and Neyyar for a period of 6 months from october 2023

Amount

maintanance

17.15:Providing and fixing white vitreous china pedestal type (European type / wash down type) water closet pan.

17.78:Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/6 litre (adjustable to 4 litre /8 litres), including seat cover, and cistern fittings, nuts bolts and gasket etc complete.

17.18.1:Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete.10 litre capacity - White

17.20.1:Providing and fixing solid plastic Seat with lid for pedestal type W.C. pan complete:White solid plastic seat with lid

17.25.2:Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings:Flat back wash basin of size 550x400 mm

17.28.1.2:Providing and fixing P.V.C. waste pipe for sink or wash basin including PVC. waste fittings complete. Semi rigid pipe40 mm dia

17.28.2.1:Flexible pipe32 mm dia

18.51.1:Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore

18.53.1:Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore

18.74.1:Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, Collar and bush approved quality and colour .15 mm nominal bore with 30 cm length

50.17.1.4:Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge.

50.18.7.3.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 25 mm dia 10Kgf/ cm2- Internal work- Exposed on wall

50.18.7.4.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 10Kgf/cm2- Internal work - Exposed on wall

50.18.9.17.1:Providing and fixing PVC pipes including fixing the pipe with clamps/ clip at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 63 mm dia 6 Kgf/cm2 - External work - Exposed on wall

9.79.2:Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete.50 mm

9.82:Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.

9.88:Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.

6.1.2:Brick work with common burnt clay F.P.S (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand)

9.90.3:Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete.Size 65 mm

18.18.3:Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete:25 mm nominal bore

50.18.7.6.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing . This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 6 Kgf/cm2 - Internal work- Exposed on wall

21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)

21.1.2.2:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)

21.2.2:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides

21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness

21.12.2:Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0mm thick & 2100 mm long with S.S. screws etc. complete as per direction of Engineer -in-Charge.Powder coated minimum thickness 50 micron aluminium tubular handle bar

21.13:Providing and fixing 100 mm brass locks ( best make of approved quality ) for aluminium doors including necessary cutting and making good etc. complete

21.16.2:Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. complete as per direction of Engineer-in-Charge.Powder coated minimum thickness 50 micron aluminium

OD155168/2023-2024:providing and fixing 150mm brass adjustable shower including cost of materials, labour charge etc

OD155169/2023-2024:providing and fixing brass telephonic shower including cost of materials, labour charge etc

OD155170/2023-2024:Providing and fixing brass two in one tap including cost of materials, labour charge etc

OD155171/2023-2024:Providing and fixing 15mm brass swan neck tap including cost of materials, labour charge etc

OD155172/2023-2024:Cutting and removing arayal growth over the parapet wall, roof slab etc inccluding all cost of rectifying materials, burying chemicals (acid , kerosene etc) and reoval of waste materials with in a distance of 150m away from site as per the direction of Engineer in charge

OD155173/2023-2024:Providing and fixing syphon innerset of flushing cistern including cost of materials ,labour charge etc

OD155174/2023-2024:Providing and fixing 20mm dia curtain bracket including cost of materials , labour charge etc

OD155175/2023-2024:Providing and fixing 750mm cp brass towel rail including cost of materials, labour charge etc

OD155176/2023-2024:Supplying and fixing acrylic name board including cost of materials , labour charge and conveyance etc

OD155177/2023-2024:Providing and fixing mosquito net including cost of materials, labour etc

OD155178/2023-2024:Providing and fixing brass wall mixer unit including cost of materials, labour charge etc

OD155179/2023-2024:Repairing cushion chair with U foam, furnishing cloth etc

OD155180/2023-2024:Removing the waste cumulative materials from the yard by 15km lorry conveyance

OD155181/2023-2024:Engaging coolie for cleaning and rearranging furniture as per the direction of Engineer in charge

OD155182/2023-2024:Engaging carpenter for repair work

OD155183/2023-2024:Providing and fixing S.S aldrop150mm including cost of materials, labour charge etc as per the istruction of Engineer charge

OD155184/2023-2024:Engaging beldar for dismantling and relaying aluminium work as per the directions of Engineer in charge.

11.36:Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

11.37:Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.

OD155185/2023-2024:Sticking computer cut vynyl sheet or fig. 2.5cm, 4cm or 5cm height ( block ,roman ,italic or Indian ) on the wooden board already fixed with all cost and conveyance

OD155186/2023-2024:Providing golden colour lettr over the acrylic name board including cost of materials as per the direction of Engineer in charge

OD155187/2023-2024:cleaning blocked up silt pit of size 225 x 225mm by removing waste & other materials etc complete

OD155188/2023-2024:supplying and fixing cp brass towel ring

OD155189/2023-2024:repairing shutters of doors ,windows, ventilators as per the directions of engineer in charge

OD155190/2023-2024:providing and fixing cp pillar cock including cost of materials,labour charges etc

OD155191/2023-2024:Engaging fitter for attending petty repair

OD155192/2023-2024:providing and fixing brass front door lock (cylinder type)including cost of materials , labour charge etc complete

OD155193/2023-2024:Cleaning blocked up sewage line by removing waste and other materials including disposal in pit etc complete

50.17.1.1:Supplying and fixing Stainless steel soap dish including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.

17.32.4:Providing and fixing mirror of superior glass ( of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 1500x450 mm

21.3.2:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness

OD155194/2023-2024:Supplying and fixing 100mm S.S tower bolt including cost of materials,labour charge etc

OD155195/2023-2024:Cleaning blocked up silt pit of size 225 x225mm by removing waste and other materials including disposing in pits etc complete

OD155196/2023-2024:Cleaning blocked up and notworking sewer manhole of size 60 x 60cm up to 1.20m by removing waste matter ,night soil etc as per the direction of Engineer in charge

21.2.1:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

A. NISAMUDEEN

Bidder Name

A. NISAMUDEEN

V Sadanandan