RENOVATION/ UPGRADATION AND SUNKEN FLOOR TREATMENT AT HQ BUILDING AT AFA HYDERABAD

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed.

Demolition of Plain cement concrete (un reinforced) in ground floors and pavings (below or above ground level) complete all as specified and directed.

S & F 10 mm thick Glazed Vitrified coloured tiles dark shade, double charged / ultra charged matt finish / non-skid as approved, area of each tile exc 0.42 sqm but not exc 1.00 Sqm set and jointed in neat cement slurry and pointed in white or coloured cement to match in floors including 15 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes complete all as directed.

S & F 10 mm thick Glazed Vitrified coloured tiles dark shade, double charged / ultra charged as approved, area of each tile exc 0.42 sqm but not exc 1.00 Sqm set and jointed in neat cement slurry and pointed in white or coloured cement to match on vertical surfaces as in skirting / dado including rendering / screed layer 10 mm thick in cement mortar 1:4 complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles and removal all rubbish material outside premises to a distance exceeding 1.5 K but not exceeding 5 Km complete all as specified and directed..

M & L for precast cement concrete solid building blocks or slabs 10cm thick with plain or interlocking joints with PCC 1:3:6 type C1 using 20mm graded stone aggregate setting in mortar 1:6 in walls, complete all as specified and directed.

Demolition of reinforced cement concrete of any description , any grade and in any position including reinforcement cut as required to facilitate demolition as in water tanks including base beams, shelves, platforms etc complete all as specified and directed.

M&L for Precast reinforced cement concrete 1:2:4 mix, type B-1 using 20 mm graded stone aggregate as in slabs supported on walls, as in platforms, shelves etc all as specified and directed.

M&L for steel reinforcement TMT bars 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

M & L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 mixed with liquid water proofing compound surface finished even and smooth without using extra cement complete all as specified. Note-Liquid water proofing compound will be measured and paid separately

S&F Liquid water proofing compound complete all as specified and as directed.

Taking down Chowkhats or frames exc. 1.5 sq m. but n exc 4 sq.m each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down Chowkhats or frames not exc. 1.5 sq. m each but with shutters (without taking off shutters from the frames) complete all as specified and directed.

S&F IInd class hard wood plain, solid, straight, chowkats and frame, wrought, framed or rebated on the solid rounded or chamfered, put together with glue pinned at joints all as specified and as directed. .

S & F for 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides all as specified and as directed.

S & F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibbers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineering- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)

S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with mitre joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F of extruded 100mm Aluminium alloy B-22 butt hinges, with galvanised mild steel hinge pin, complete all as specified.

S&F of 150mm Aluminum anodised barrel tower bolts of extruded section complete all as specified.

S&F of 150mm extruded aluminium anodised alloy handles fabricated type complete all as specified.

S&F 250 mm aluminium alloy anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified.

Taking up or down steel tubing 15 mm and connections, including cleaning for refixing or removal to store etc complete all as directed.

Taking up or down steel tubing 20 mm and connections, including cleaning for refixing or removal to store etc complete all as directed.

Taking up or down steel tubing 25 mm or 32 mm and connections, including cleaning for refixing or removal to store etc complete all as directed.

Supplying and laying of 20 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified including cutting grooves/ holes in brick walls for concealing and making good with CM (1:3) where ever required complete all as specified and directed.

Supplying and laying of 25 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified including cutting grooves/ holes in brick walls for concealing and making good with CM (1:3) where ever required complete all as specified and directed.

Supplying and laying of 32 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified including cutting grooves/ holes in brick walls for concealing and making good with CM (1:3) where ever required complete all as specified and directed.

Material and labour for water proofing treatment to sunken slabs as under complete all as specified and as directed:- (i) Preparation and cleaning of the existing sunken/lowered portion of RCC slab surface for full depth of sunken floor by wire brush. chisel out any mortar sticking the surface. (ii) Applying FOSROC Nitoproof 600PF (Minimum 0.80mm dft) over a priming coat of Nitoproof WB or equivalent product of Asian paints / M/s MC Bauchemie / CIPY/ SIKA / Pidilite Dr Fixit / Thermax / STP as approved by GE, applied as per manufacturers instructions to bottom and full vertical sides of sunken floors. (iii) Fill it with water and check for dampness and seepage. In case the slightest indication of seepage / leekage is noticed, the same shall be rectified by injection grouting to seal all cracks or application of polymer modified mortar FOSROC Nitobond SBR or equivalent of M/s MC Bauchemie / CIPY SIKA / Pidilite Dr Fixit / Asian paints / Thermax / STP admixed with integral WPC or cementitous crystalline waterproofing compound in the affected area to seal all cracks and micro cracks if any, and this shall be done by contractor at his own cost. (iv) Apply additional coat of FOSROC Nitoproof 600PF or equivalent of Asian paints / M/s MC Bauchemie / CIPY / SIKA / Pidilite Dr Fixit / Thermax / STP . (v) All junction points of side walls where CI/GI pipes are passing through shall be sealed with epoxy cement mortar.

M&L for light weight cinder aggregate of size 20 to 40 mm for sunken filling including taking out old materials of any description and removing debris to a distance exceeding 1.5 Km but not exceeding 5Km complete all as specified and directed.

M&L 75 mm thick Plain cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base flooring complete all as specified and directed by Engineer in charge

M&L for 25 mm thick PCC 1 : 2 : 4 type B-0 using 12.5 mm graded stone aggregate as in screed bed in floors all as specified and directed.

M&L 18 - 20 mm thick Granite as in counter top wash basins including moulding edges, cutting to required shape and size finishing etc, with fixed cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

S&F of 1000 lit capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of old exiting tank complete all as specified and directed.

S&F of 25 mm dia Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe all as specified and directed (Minimum weight 15 mm - 142 Gms)

S&F 25mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends suitable for CPVC pipe including connecting socket all as specified and directed.

S&F in repairs vitreous china table top wash hand basin size not less than 450mm x 300mm with 32/40 mm dia waste fittings, brass, chromium plated with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

S&F in repairs 32/40 mm dia brass chromium plated bottle traps for wash basin with inlet and outlet screwed for pipe or connections including necessary packing union and cap and 32 mm dia PVC flexible waste pipe complete all as specified and directed.

S&F Vitreous china premium/ 1st quality wash down water closet cascade type EWC white/ ivory / off white (closed pattern incl all necessary accessories like rag bolts/ seat cover, in built flushing cistern with accessories, complete in all respect all as specified.

S&F Vitreous China Urinal, full stall type, white (excluding flushing cistern, flush pipe and waste pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, 32 mm bore waste coupling of PTMT (half or full threaded) suitable for urinals, (Minimum weight 32mm-45gms, Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms), fixing flush pipe, grating and Union for discharge pipe all as specified and directed.

S&F in repairs Vitreous china urinal partition white of size 310x700 mm complete all as specified and directed.

S/F in repairs 15 mm bore Stop valves, / angle valves, fancy type, chromium plated with long shank and cup (concealed type) cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F Concussive push button taps of cast copper alloy, screwed for iron pipe and fixed complete all as specified and directed.

S&F 15 mm pillar taps fancy type with long bend cast copper alloy with capstan heads, chromium plated screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipes complete all as specified and directed.

S&F in repair Brass Chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F 15 mm bore Two way Bib taps chromium plated fancy type , cast copper alloy with crutch or butterfly handle, screwed down, screwed for CPVC pipe 20 mm outer dia including suitable connector socket all as specified.

S & F in PVC connections 15mm size with PTMT nuts of length 450mm.

S & F in repair PVC (SWR) pipes of 110mm dia single socketed in any length with rubber ring joints fixed to walls / floor incl taking down old pipes of any description and cutting holes as required and making good disturbed portion after fixing of pipes etc. complete all as specified and as directed.

S & F in repair PVC (SWR) pipes of 75 mm dia single socketed in any length with rubber ring joints fixed to walls / floor incl taking down old pipes of any description and cutting holes as required and making good disturbed portion after fixing of pipes etc. complete all as specified and as directed

S&F in repair 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement all as specified and as directed

S & F in repairs PVC (SWR) bend of 75 mm dia .

S&F in repairs 110mm bore PVC SWR bend of 110 mm dia.

S&F in repairs 110mm bore PVC SWR bend with acces door complete all as specified

S&F in repairs 110mm bore PVC SWR branch piece single 'Y' equal or unequal

S&F in repairs 110mm bore PVC SWR junction single (single T) equal or unequal

S&F in repairs PVC (SWR) 110 mm dia Vent cowl

S&F in repairs 75mm bore PVC SWR junction single (single T) equal or unequal

M&L in repairs for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement all as specified and directed.

S&F of 40 mm bore High density polyethylene (HDPE) pipes of pressure rating 6 kgf/sq. cm including necessary sockets, bends etc for waste pipe of urinals and wash basins.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified

S&F of Toilet paper holder with flat recessed type brass, chromium plated or stainless steel fixed to walls with chromium plated (CP) brass screws complete all as specified and directed.

S&F 4mm thick Figured glass, pin head type and glazing fixed in aluminium frames with rubber beading/gasket in squares n exc 0.5 sq. m in each pane complete all as specified.

S&F powder coated aluminium frame for doors, windows, ventilators, partitions etc with one or more rebates including joining cleat for fixing etc. complete all as specified.

S&F of Anodised aluminium window and ventilator shutters, sliding type without sash bars, aluminium sections weighing not less than 0.55 kg/m including necessary joining cleats, rollers, rubber packing, anodised aluminium snap beading, screws, anodised aluminium locking plates and locking arrangement etc

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed with aluminium wire staples

M&L for 5 mm thick Rendering on concrete surfaces of ceilings surface finished even and smooth with out using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces of ceilings and applying two coats of distemper oil emulsion over one coat of alkali resistant primer over 3mm thick wall care putty complete all as specified and as directed.

M&L for preparation of wood or wood based surfaces and applying two coats of synthetic enamel paint over a coat of wood primer complete all as specified and directed.

Taking down carefully un serviceable point wiring of light points, fan, socket out let on TW battens/PVC pipes/casing & caping including material like sockets, switches, ceiling roses, regulators, light fittings etc and removing the materials from site and making good the disturbed portion of walls/floors ceiling etc complete all as specified and as directed.

Taking down ceiling fan/exhaust fan of any Sweep and Make by disconnecting Electric Connection and removing ceiling fan/exhaust fan handed over to MES STORE YARD OF AGE E/M (AFA) Hyderabad complete all as specified and as directed.

M & L for Point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits), with multi-stranded copper conductor 1.5 Sq. mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked with valid CML No. in and including medium grade, PVC concealed conduit of dia not less than 20mm and conduit accessories, ISI marked with valid CML No. concealed in wall/roof/floor etc with pressed flush metal boxes covered with inner plates & outer plates etc. suitable for mounting of modular switchs & sockets including PVC insulated multi-stranded copper conductor 1.5 Sqmm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for the following :- NOTE: - Switches and socket to be measured and paid for separately. (a) One light point controlled by one switch

(b) One Exhaust fan point controlled by one switch

(c) One switch socket out let 5 pin, 5/6 Amp on independent board

All as per item here in before but point wiring with 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed (FRLS) cable 1100 volts grade and 1.5 Sqmm PVC insulated and unsheathed (FRLS) cable 1100 volts grade with multi-stranded copper conductor as earth wire for 15 / 16 Amps multi purpose socket combination point on independent board

S&F modular socket 6/16 A-2/3 pin combined 2 modules ISI marked with valid CML No complete all as specified and directed.

S&F modular socket 6 A-2/3 pin combined 2 modules ISI marked with valid CML No complete all as specified and directed.

S&F modular switch 1 way 6 Amp 1 module ISI Marked with valid CML No. Complete all as specified and directed.

S&F modular switch 1 way 16 Amp 1 module ISI Marked with valid CML No. Complete all as specified and directed.

S&F of ceiling rose, three terminal, PVC/polycarbonate, insulated body, ISI marked complete all as specified and as directed.

S&F LED mirror light fitting 1x10 W 220 V AC decorative box type with driver, holder including LED tub light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

S&FLED light fitting 1x20 W 220 V AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

M&L for Sub Main wiring with two runs of 4 sq mm 1100 V grade (nominal area) single core PVC insulated unsheathed cable multi-stranded copper conductor drawn through and including medium grade, rigid non-metallic PVC conduit / casing & caping (as per site requirement) of suitable sizewith all necessary fittings, surface in walls/roof/floor duly earthed with one run of single core cable of same size but green in colour as continuous earthing wire and connecting to common earth dolly complete and after taking out the existing sub-main wiring etc. complete all as specified and as directed. Note:-(i) Necessary PVC dummy plates & rigid PVC junction boxes for maint./inspection purpose as required on site/directed by Engr-in-charge shall deemed to be included in the quoted rate. (ii) Same size wire shall be used for phase, neutral & earth conductor (iii) The wiring shall be done strictly by following proper colour coding using red, yellow and blue only for phase, black for neutral and green for earth leads. (iv) Three runs of cable and one run of PVC conduit / casing caping will be measured as one unit.

S&F of MCB DB SPN 4 way with copper bus bar & neutral link double door type to be fixed in the wall including connections and making good the disturbed surface of wall to perfectly match with the existing wall complete all as specified and as directed.

S&F MCB SPN 6 to 32A, 10KA rupturing capacity complete all as specified and as directed.

S&F MCB SP 6 to 32 A 10 KA rupturing capacity complete all as specified and as directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m all as specified and as directed

K LAKSHMAN SINGH AND CO (BID ID -3350847)

S J REDDY (BID ID -3352491)

Deepika Enterprises (BID ID -3352969)