DMF

BILL OF QUANTITIES

Item Description of Item Quantity Unit Rate In Amount

1 Excavation for foundation upto 1.5 m depth including sorting 46.44 Cum 272.57

out and stacking of useful materials and disposing off the

excavated stuff upto 50 Meter lead.(B) Dense or Hard soil

2 Excavation for foundation upto 1.5 m depth including sorting 96.62 Cum 212.52

out and stacking of useful materials and disposing off the

excavated stuff upto 50 Meter lead.(A) Loose or soft soil

3 Excavation for Foundation upto 1.50m depth including Sorting 27.81 Cum 268.92

out and stacking of useful materials and disposing of the

excavated stuff upto 50 Meter Lead. (a)Hard murrum

4 Excavation for foundation upto 1.5 m depth including sorting out 12.96 Cum 276.24

and stacking of useful materials and disposing off the excavated

stuff upto 50 Meter lead.(D) Soft rock not requiring Blasting

5 Filling in plinth with sand under floors including watering 31.19 Cum 481.80

ramming, consolidating and dressing complete

6 Providing and laying ordinary cement concrete 1:2:4 (1-Cement 17.98 Cum 7665.60

:2- coarse sand : 4- graded stone aggregates 20mm nominal

size)M200 and finishing smooth with,curing etc. complete

including the cost of formwork but excluding the cost of

reinforcement for R.C.C work in (A) BEAMS :(iii) Having cross-

sectional area more than 0.08Sq.M

and upto 0.12 Sq.M

7 Providing and laying cement concrete 1:4:8 (1- Cement : 4- coarse 56.22 Cum 2769.69

sand : 8- hand broken stone aggregates 40 mm nominal size) and

curing complete excluding cost of formwork in (A) Foundation

8 Providing and laying cement concrete work 1:2:4 (1-Cement : 2- 24.26 Cum 4093.89

Coarse sand : 4- graded stone aggregates 20mm nominal size)

and curing complete excluding cost of formwork and

reinforcement for reinforced concrete work in (A) Foundations,

footings, Base or columns and

9 Providing and laying ordinary cement concrete 1:1.5:3 (1- 20.53 Cum 10469.21

Cement 1.5- coarse sand : 3- graded stone aggregates 20 mm

nominal size) M200 and finishing smooth with,curing etc.

complete including the cost of formwork but excluding the cost

of reinforcement for R.C.C work in (B) COLUMNS: (iii) Having

cross-sectional area more than 0.08 Sq.M and upto 0.12 Sq.M

10 Providing and laying ordinary cement concrete 1:2:4 (1-Cement 37.38 Cum 8593.80

:2- coarse sand : 4- graded stone aggregates 20mm nominal

size)M200 and finishing smooth with,curing etc. complete

including the cost of formwork but excluding the cost of

reinforcement for R.C.C work in (A) BEAMS :(iii) Having cross-

sectional area more than 0.05 Sq.M and upto 0.08 Sq.M

11 Providing and laying ordinary cement concrete 1:1.5:3 (M-200) (1 46.59 Cum 6888.15

– cement, 1.5 – coarse sand, 3 – graded stone aggregate

mm. nominal size) and finishing smooth with curing etc.

complete including the cost of form work but excluding the cost

of reinforcement for R.C.C. work in slab having thickness more

than 10 cm and up to 13 cm.

12 Providing and laying ordinary cement concrete 1:2:4 (1 – cement, 6.26 Cum 8518.15

2 – coarse sand, 4 – graded stone aggregate 20 mm.

Nominal size) for reinforced concrete Lintel including finishing

smooth with curing etc. complete including the cost of formwork

but excluding the cost of reinforcement.

13 Providing and laying cement concrete 1:2:4 (1- Cement : 2- 3.76 Cum 6693.29

Coarse sand : 4- graded stone aggregates 20 mm nominal size)

for reinforced concrete Chhajjas not exceeding 10cm. thickness

upto floor two level including finishing the exposed surfaces

with cement mortar 1:3 (1-cement, 3 Fine sand) to give a smooth

and even surface centering and formwork and curing complete

excluding cost of reinforcement

14 Filling in foundation and plinth with murrum or selected soil in 139.61 Cum 301.78

layers of 20cm. thickness including watering, ramming and

consolidating etc.complete.

15 White Stone Bela mesonry block in course in super structure with 173.78 Cum 6339.43

stone of approved quality in Lime Mortar 1:6 (1-Cement : 6-

course sand) including packing the joints etc. complete.

16 Providing and fixing extruded aluminum windowhaving 31.68 Sqmt 2140.33

extruded aluminum Colour Powder Coatedsection frame main

outer size 127mm x 38.10mm x1.35m ,@ Wt.1.384 g/mt,horizontal

Four trackmember size 122.20mm x 31.75mm x 1.10mm @Wt.

1.205 Kg/mt,vertical member of size 122.20mmx 31.75mm x

1.50mm ,@ Wt. 1.398 Kg/mt withsliding shutters of horizontal

member size 40mm x18mm x 1.29mm @ wt.of

0.456Kg/mt,verticalmember of size 40mm x 18mm x 1.29mm @

wt.of0.456Kg/mt,@ with 5 mm thick transparent bronzecolour

tinted float glass with powder coatedaluminum fittings and

fixtures and transparentsilicon sealant glass fixing to frame as

per details etccomplete for window.

17 Provoding and fixing 35mm thick flush door for Doors, windows 21.00 Sqmt 3773.84

and clerestrory windows including blackenamelled M.S. butt

hinges with necessary screws. (A) Indian teak wood (i) Fully

18 Provoding and fixing 35mm thick panelled, glazed or panelled 4.20 Sqmt 3301.85

and glazed shutters for Doors Windows and clerestory windows

inclusing black enamelled M.S. butt hinged with necessary

screws. © Hard board panels

19 Providing and fixing M.S. grills of required pattern to wooden 1281.60 Kg 106.23

frames of windows etc. with M.S. flats at required spacings and

frame alround, square or round bars with round headed bolts

and nuts or by screws (A) Plain Grill.

20 Providing TMT Bar FE 500D reinforcement for R.C.C. work 18081.45 Kg 77.29

including bending, binding and placing in position complete

upto floor two level

21 Providing and laying marble stone slab flooring over 20mm 38.51 Sqmt 2231.50

(average)base of cement mortar 1:6 (1-cement : 6 coarse sand) or

L.M. 1:1.5(1- lime putty : 1.5 - coarse sand) laid and jointed with

gray cement slurry including rubbing and polishing complete.

(A) Marble slab 25mm thick

22 Providing and laying broken china mosaic flooring for terrace 340.64 Sqmt 779.70

using 12 mm to 20 mm broken pieces of glazed tiles to be laid

over cement mortar 1:3 to plain or slope and to be tempered to

bring mortar creme out upto surface using white cement

including rounding off junctions and extending them upto 15 cm

along the wall, clearing with water and oxalic acid etc. as

23 P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm 349.89 Sqmt 1264.48

(average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on

new surface or fixing on existing flooring by adhesive material

including dismentaling of existing flooring and jointed with color

cement slurry including finised with flush pointing & cleaning

the surface etc. complete for light shade

24 Providing 15mm thick cement plaster in single coat on Rough 739.98 Sqmt 195.42

(Similar)side of single or half brick walls for interior plastering

upto floor two level and finished even and smooth in (i) Cement

mortar 1:3 (1-cement:3-sand) up to floor two level

25 Providing 10mm thick cement plaster in single coat on 846.30 Sqmt 196.27

brick/concrete walls for interior plastering upto floor two level

and finished even and smooth in (i)Cement mortar 1:3 (1-

cement:3-sand) upto floor two level finished even & Smooth with

floating coat of neat cement slurry Comp. with Cement Slurry.

26 Wall painting (twocoats) with plastic emulsion paint of approved 262.46 Sqmt 125.40

brand and manufacture on undecorated walls urface to give an

even shade including throughly brushing the surface free from

mortar dropping sand other foreign matter and sand papered

27 Finishing wall with weather proof exterior emulsion paint on 713.54 Sqmt 120.26

wall surface (two coats) to give an required shape even shade

after thoroughly brushing the surface to remove all dirt, and

remains of loose powdered materials.etc complete

28 Distempeing (Two coats) with oil bound distemper of approved 860.81 Sqmt 75.68

brand and manufacture and of required shade on wall surfaces to

give an even shade, over and including a priming coat with

distemper primer of approved brand and manufacture after

thoroughly brushing the surface free from mortar dropping and

other foreign matter and also including preparing the surface

even and sand papered smooth.

29 Point wiring for Light Bell with 2-1.5 sq.mm & earthwire of 1.5 48.00 Point 424.20

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multistrand copper wires, in following type of pipe to

be erected concealed inl on surface on wall ceiling complete with

6A Modular type switch bell push & accessories and earth

continuity of following type, erected on PVC Metallic box, single

mounting base frame covered with textured/metallic front plate

modules erected on in wall ceiling as per pipe erected, with

necessary Lamp holder/ceiling rose H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories cat- lll

30 Point wiring for FAN with 2-1.5 sq.mm & earthwire of 1.5 sq.mm 33.00 Point 636.30

(Green) both are of ISI marked 1.1 KV Grade FRLS PVo insulated

multistrand copper wires, in following type of pipe to be erected

concealed in flushed on wall/ceiling complete with 6A Modular

type switch and hum free EME four or more step type electronic

fan regulator with separately mounted and accessories with earth

continuity of following type erected on PVC Metallic box, single

mounting base frame covered with textured/metallic front plate

modules erected on in wall ceiling as per pipe erected. with

necessary ceiling rose H.D.Connector as directed. (a) with

medium class Rigid PVC pipe and accessoriescat. Ill

31 Providing and erecting Mains with 1.1 KV grade FRLS PVC 1170.00 Rmt 84.84

insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected concealed in /flushed on

wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC

insulated stranded wire of green colour for earth continuity of

following size (A) With medium class Rigid PVC pipe and

accessories(b) 2 wire 2.5 sq. mm

32 Providing & erecting Switch board for Computer or electric 24.00 Each 1210.99

apparatus consisting of following modular type accessories

mounted with PVC / Metallic concealed/open box with single

mounting base frame covered with textured/metallic /white

front plate,modules erected with necessary connections as

1 no. 6A/16A universal plug-switch combined. 3 nos. 6A Switch

3 nos. 6A 5 pin Plug For Modular Type Accessories cat III

33 Supplying and erecting approved make of tube fitting with One 48.00 Each 595.90

no T-5 tube 24/ 28 W with Electronic ballast with each tube

separately THD less than 10 & built in adaptors, GI / PVC

housing & mirror optic reflector, suitable to work on 120V - 300V,

A.C. supply with connector and adapter if required. [Make of

fitting & tube may be differ& fitting shall be providing with tube]

& Approved make fluorescent tube 120cms. 18/20 watt erected,

34 Providing & erecting 240 V MCB double pole switch for lighting 12.00 Each 313.10

load (B Curve) having 10 KA breaking capacity & Confirming to

IS 8828 in Existing box having capacity (B) 40 Amp Cat-lll

35 Providing and erecting Sheet Steel powder coated MCB 6.00 Each 1681.65

distribution board flush surface mounted fitted with busbar,

neutral link, earth bar and DIN rail, confirming to IS 13032 and

BS 5486-1986 without McB to house appropriate nos. of MCBs

The DBs should be used of same company of MCB to be used)

(H) single phase 12 way ss double door

36 Supplying & erecting funnel type earthing having earth plate of 7.00 Each 1919.00

following size burred in specifically prepared earth pit 3 mtr.

below ground with 40 kg. charcoal and salt with alternate layers

of charcoal & salt, 20mm.dia. G.I. pipe with Funnel with a wire

mesh for watering & bricks masonry block, C.I. Cover complete

as per para 7.3 of IS 3043 with necessary length of double

Galvanised Iron / copper earth wire No 6 SWG bolted with lug

to the plate and covered in 12 mm dia. G.I. pipe 2.5 mtr long

complete connected to the nearest switch gear with end socket as

per direction & duly tested by earth tester confirming to IS (As

per drawing) with following specification (A) With 30 x 30 x

cms: C.I. earth plate

37 Providing & erecting Approved make Ceiling Fan with double 27.00 Each 2666.40

ball bearing ISI mark with Condenser 230 volt A.C.50 Hz

mm sweep complete having 3 blades aluminium body and blade

sets having ornamental design shanks , canopy erected with

earthing. [ Make shall be approved by Engineer in Charge]

Fifty Eight Lakh Twelve Thousand One Hundred Ninty Eight and Seventy Four Paisa

I \ We am \ are willing to carry out the work at ……………………… % above \ bellow percent ( Should be written in figures and

words ) of the estimated rate mentioned above. Amount of My \ Our tender works put as under.

* Estimated Amount * Estimated Amount

Put to tender Rs…………………… Put to tender Rs……………………

Deduct……..……..% Add……..……..%

In words………………….……………… In words………………….………………

1.The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which

no extra payment shall be made.

2.The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3.GST and Income tax TDS will be deducted at a source while making payments of bills

4.In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement

Consumption/16/C Date:11/05/2017 as stated in

S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost

of difference of cement consumption have been deducted from the rate of original item at the rate of input rate mentioned in all the

Signature of Contractor.

Deputy Executive Engineer Executive Engineer

Panchayat R&B Sub Division Panchayat R&B Division