Construction to Various Aganvadi Building of Santrampur Taluka Package No 8 under WCDD 4235 Year 2026-27 Dist: Mahisagar. (Total-6 Unit, Plan-2)

Name of Work: Construction to Various Aganvadi Building of Santrampur Taluka Package No 8 under WCDD 4235 Year

2026-27 Dist: Mahisagar. (Total-6 Unit , Plan-2)

BILL OF QUANTITIES

Item Description Qty. Unit Rates Amount

Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful

1 materials and disposing off the excavated stuff upto 50 Meter lead. (D) Soft rock not requiring 298.80 cu.m 278.06

Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and stacking of

2 useful materials and disposing off the excavated stuff upto 50 Meter lead. (D) Soft rock not 75.00 cu.m 301.85

requiring Blasting

Filling in foundation and plinth with sand in layers of 20 cm. Thickness including watering

ramming and consolidating etc. comp.

Filling foundation and plinth with murrum or selected soil in layer of 20 cm in thickness

including ramming watering and consolidating etc. complete

Anti-Termite System: Providing and laying of permanent piping technology anti-termite

treatment before flooring work by installing LLDP (Low linear density polyethylene) tube of

mm O.D. & 6.4 mm 1.D. with inbuilt pressure compensation chip every 30 cm interval in the

tube, having working pressure of 2 Kg/cm2 and release rate of 1.9 Itr/hour fixed by P-clips and

The LLDP pipe shall be installed at the entire periphery of the building and at internal network

of building at a depth of 20 to 200 mm under floor at every 2 to 3 mtr. c/c distance (adjusted as

per building layout) & ends of loop pass through a PVC elbow of minimum 32 mm ID at

junction box of wall and floor level, entering into a steel reinforced grooved flexible pipe of

minimum 22 mm ID leading into junction box and the loops shall terminate in junction boxes

& test every junction during injecting chemicals for termite control treatment.

The anti-termite chemical Imidacloprid 30.5% SC mix as per IS- 6313 (part III) shall be

injected by the pressure pump diluted with water @ 10.5 ml/5 ltr of water at the rate of

Kg/sq.cm @ 5 Ltr/SMT. The contractor shall submit approved line plan for piping system and

junction boxes dully approved by Engineer-in-Charge with bond of 5 year warranty. (II)Anti

Termite chemical injected area (Chemical injecting incl. labor cost)

Providing and laying cement concrete 1:3:6 (1-Cement : 3- coarse sand : 6- machine cut stone

6 aggregates 40 mm nominal size) and curing complete excluding cost of formwork in (A) 76.74 cu.m 3,092.22

Foundation and Plinth.

Providing and laying controlled cement concrete M.250 and curing complete including the

7 cost of formwork and excluding reinforcement for reinforced concrete work in (A) 49.74 cu.m 4,889.33

Foundations, footings, and Mass concrete. footing

Providing and laying controlled cement concrete M-250 and curing complete including the

8 cost of form work but excluding the cost of reinforcement for reinforced concrete work in (D) 10.80 cu.m 8,254.97

Columns up to Plinth Level.

Providing and laying controlled cement concrete M-200 and curing complete including the

9 cost of form work but excluding the cost of reinforcement for reinforced concrete work in (D) 24.00 cu.m 8,238.85

Columns on Ground Floor.

Providing and laying controlled cement concrete M-200 and curing complete including the

10 cost of form work but excluding the cost of reinforcement for reinforced concrete work in (D) 3.00 cu.m 8,280.39

Columns on Terrace Floor.

Providing and laying controlled cement concrete M-250 and curing complete including the

11 cost of form work but excluding the cost of reinforcement for reinforced concrete work in (C) 60.36 cu.m 6,513.25

Ground Beam and Plinth Beam

Providing and laying controlled cement concrete M.200 and curing complete including the

12 cost of formwork and excluding reinforcement for reinforced concrete work in (C) Beam at 25.80 cu.m 6,479.89

Providing and laying controlled cement concrete M-200 and curing etc. complete including the

13 cost of form work and reinforcement for reinforced concrete work in (C) Chhajja at Ground 3.60 cu.m 6,934.10

Providing and laying controlled cement concrete M-200 and curing etc. complete including the

14 cost of form work and reinforcement for reinforced concrete work in (C) Lintel at Ground 2.76 cu.m 9,126.42

Providing and laying controlled cement concrete M.200 and curing complete including the

15 cost of formwork and excluding reinforcement for reinforced concrete work in (C) Ground 37.80 cu.m 7,667.59

Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding and

placing in position complete upto floor two level

Name of Work: Construction to Various Aganvadi Building of Santrampur Taluka Package No 8 under WCDD 4235 Year

2026-27 Dist: Mahisagar. (Total-6 Unit , Plan-2)

BILL OF QUANTITIES

Item Description Qty. Unit Rates Amount

Steel work, welded in built up sections framed work including cutting, hoisting, fixing in

position and applying a priming coat of red lead paint. (A)In beams and joists, channels angles

Tees, flats, with connecting plates or angle cleats as in main and cross beams. Hip and jack

rafters, purlins conneted to common rafters and the like

Painting two coats (excluding priming coat) on new steel and other metal surface with enamel

18 paint, brushing, interior to give an even shade including cleaning the surface an even shade 60.60 Sq.m 92.26

including cleanicn the surface of all dirt, dust and other foreign matter.

Providing and fixing M.S. grills of required pattern to wooden frames of windows etc. with

19 M.S. flats at required spacings and frame alround, square or round bars with round headed 1641.60 kg 107.75

bolts and nuts or by screws (A) Plain Grill.

Applying priming coat over new steel and other metel surface after and including preparing the

surface by throughly cleaning, oil,grease, dirt and other foreign matter and scoured with

brushes fine steel wood, scrapers and sand paper with ready mixed priming paint brushing red

Providing and fixing 90cm high Stainless steel railing made from anti corrosive 304 grade S.

S. pipe of 50mm dia. (16 Gauge) as hand rail with S. S. 304 grade Balusters / Posts of Pipe

50mm dia. (16 Gauge) as a vertical support fixed in RCC slab at 1.2m c/c including two

horizontal S. S. pipes of 16mm dia. (16 Gauge) at equal Distance fixed by 18.75mm dia (16

Gauge) S. S. pipe with baluster including accessories as per Detailed Drawing as directed etc.

Brick work using common burnt clay building bricks having crushing strength not less than

kg/sq.cm. in foundation and plinth in cement mortar 1:6 (1 cement : 6 fine sand) Conventional

Brick work using common burnt clay building bricks having crushing strength not less than

23 Kg/Sq.cm. in super structure above plinth level upto floor two level in cement mortar 1:6 97.20 cu.m 4,496.05

(1cement : 6 fine sand) Conventional (Ground FLoor)

Brick work using common burnt clay building bricks having crushing strength not less than

24 Kg/Sq.cm. in super structure above plinth level upto floor two level in cement mortar 1:6 18.00 cu.m 4,538.16

(1cement : 6 fine sand) Conventional (Terrace Floor)

Half brick masonry in common brunt clay building bricks having crushing strength not less

25 than 35Kg/Sm. In C.M 1:4( 1cement : 4 coarse sand) in super structure. Conventional for 106.20 sq.m 684.26

Providing and fixing 150 mm wide, approved quality chicken wire mesh at junction of brick

26 work and RCC work or two dissimilar surfaces, at all heights fixed by nails, rowal plugs or tag 85.80 sq.m 295.12

by cement mortar 1:3 before applying the plaster, including curing etc. complete

Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or half

brick walls / concrete wall for interior plastering and finished even and smooth along with

floating coat of neat cement slurry etc. comp. in (ii) Cement mortar 1:4 (1-cement :4-sand) 1)

Plaster at Ground Floor

Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or half

brick walls / concrete wall for interior plastering and finished even and smooth along with

floting coat of neat cement slurry etc. comp. in (ii) Cement mortar 1:4 (1-cement :4-sand) 2)

Plaster at Terrace Floor

Providing 10 mm thick smooth cement plaster in single coat for plastering on ceiling and

29 soffits of stairs and finished even and smooth along with floating coat of neat cement slurry 216.60 sq.m 208.97

etc. comp. (i) Cement mortar 1:4 (1 cement: 4 sand). 1) Plaster at Ground Floor

Applying two coats of (white cement based) or (acrylic lappy (putty)) or equivalent and two

coats of primer of approved brand and manufacture on new wall surface to give an even shade

including thoroughly brushing the surface free from mortar dropping and other foreign matter

and sand papered smooth. for All floor.

Wall painting (three coats) with plastic emulsion paint of approved brand and manufacture on

33 undecorated wall surface to give an even shade including throughly brushing the surface free 934.20 sq.m 125.40

from mortar droppings and other foreign matter and sand papered smooth.

Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on

34 undecorated ceiling surface to give an even shade including throughly brushing the surface 216.60 sq.m 130.93

free from mortar droppings and other foreign matter and sand papered smooth.

Name of Work: Construction to Various Aganvadi Building of Santrampur Taluka Package No 8 under WCDD 4235 Year

2026-27 Dist: Mahisagar. (Total-6 Unit , Plan-2)

BILL OF QUANTITIES

Item Description Qty. Unit Rates Amount

Finishing wall with Weather proof exterior 100% acrylic emulsion paint With one coat of

35 primer on wall surface to give an required shape even shade after thoroughly brushing the 634.20 sq.m 120.26

surface to remove all dirt, and remains of loose powdered materials.etc complete for All floor

Provoding and fixing flush door shutters, solid core construction with frame of first class

hardwood with cross board and face veneer or plywood face panels, including anodised

alluminium butt hinges with necessary screws. (B) Non-decorative type and block board core

anodised alluminium butt hinges in flush door shutters (2) 35 mm thick.

Providing and fixing FRP frame size 100x50 mm and 28mm thick FRP depress panel shutter

having extra reinforcement on sides & edges in Gel coat finish. The core of the shutter &

frame is to be filed up with injected fire retardant grade polyurethene foam done in situ

37 alongwith embedded wooden pieces for stiffening & also taking hinges & fintures. The whole 9.60 sq.m 2,377.76

FRP frame & shutter is to be water proof weather proof, termite proof & resistance to mild

acid/alkali. Rates are to be inclusive of S.S hinges with necessary screws & alluminium

fixtures & fastenings & fastener sleeve.

Providing and fixing M. S. Steel Window fabricated from M.S. angle / T-section / flats with

38 M.S. sheet shutters complete with hinges, tower bolts, handles, holdfasts, welding, grinding, 32.40 sq.m 3,122.48

red oxide primer and two coats synthetic enamel paint.

Providing and fixing window having extruded aluminum Colour anodized section frame main

outer size 95mm x 24mm x 1.17mm @ wt.of 0.738 Kg/mt , horizontal Three track member

size 92mm x 31.75mm x 1.30mm,@ Wt.1.07 Kg/mt , vertical member of size 92mm x

31.75mm x 1.50mm @ Wt. 1.06 Kg/mt with sliding shutters of horizontal member size

mmx18mm x1.29mm @ wt.of 0.456 Kg/mt, vertical member of size 40mm x 18mm x

mm @ wt.of 0.456Kg/mt/ with 5 mm thick transparent bronze colour tinted float glass with

powder coated aluminum fittings and fixtures and transparent silicon sealant glass fixing to

frame as per details etc

Providing and fixing standared extruded of alluminium section of size 63mm x 38.10mm x

40 1.2mm @ Wt. 0.643 Kg/mt with colour anodized alluminium frame for ventilation with 5 mm 3.60 sq.m 1,175.56

thick frosted glass as details etc complete for Ventilation

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base of cement mortar

1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by adhesive

material including dismentaling of existing flooring and jointed with color cement slurry

including finised with flush pointing & cleaning the surface etc. complete for antiskit

Providing and laying Vitrified tiles 8 to 10 mm thick , in skrting risers of steps and dedo on

42 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with white cement 24.60 sq.m 1,592.40

Providing and laying Machine cut, free edges, mirror polished Granite Slab flooring over

18mm (Average) thick base of cement mortar 1:6 (1-cement : 6-coarse sand) laid over and

jointed with grey cement slurry mixed with pigment to match the shade of slab including

rubbing and polishing etc. complete. (A) 18mm thick

Providing and laying Machine cut, free edges, mirror polished Granite Slab 18mm thick in

risers of steps,skirting Dedo and pillars laid on 10mm thick cement mortar 1:3 (1-Cement :

coarse sand) and jointed with gray cement slury mixed with pigment to match the shade of slab

including rubbing and polishing etc. complete

Providing and laying Anti skid Ceramic tiles 8mm to 10mm thick, 30 x 30cm in flooring

treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-

coarse sand ) finishing with flush pointing in white cement, Pattren, Colour & Shade

Approved by Architect or Engineer in charge.

Providing and layingCeramic tiles 6mm thick in skrting risers of steps and dedo on 10mm

thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with white cement slurry

Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base of

47 cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 laid over and jointed with grey 12.60 sq.m 1,095.71

cement slurry including rubbing and polishing etc. complete. (B) 30 mm thick

Providing and fixing mirror polished 18 mm thick Granite with full round edge and polished

of approved quality in clading on sill and around the doors/ windows/ ventilation with 20 mm

thick cement plaster CM (1:4) and fixing with cement slurry & adhesive including moulding

of exposed edges as directed by engineering in charge etc. complete.

Name of Work: Construction to Various Aganvadi Building of Santrampur Taluka Package No 8 under WCDD 4235 Year

2026-27 Dist: Mahisagar. (Total-6 Unit , Plan-2)

BILL OF QUANTITIES

Item Description Qty. Unit Rates Amount

Providing and laying 40 mm thick IPS (Indian Patent Stone) flooring in cement concrete 1:2:4

(1-cement : 2-coarse sand : 4-graded stone aggregate of 20 mm nominal size) laid in one layer

over prepared base and finished with a smooth floating coat of neat cement mixed with

approved yellow colour pigment of required shade at 0.35 kg/Sq.m to obtain uniform colour

and finish, including surface preparation, compacting, trowel finishing, curing and complete as

directed by Engineer-in-Charge.

Providing and laying tactile tile (for vision impaired persons as per standards) of size

300x300x9.8 mm having with water absorption less than 0.5% and conforming to IS:15622 of

approved make in all colours and shades in for outdoor floors such as footpath, court yard,

multi modals location etc., laid on 20 mm thick base of cement mortar 1:4 (1 cement: 4 coarse

sand) in all shapes & patterns including grouting the joints with white cement mixed with

matching pigments etc. complete as per direction of Engineer-in-Charge.

Providing and laying broken chine mosaic flooring for terrace using 12 mm to 20 mm broken

pieces of glazed tiles to be laid over cement mortar 1:3 to plain or slope and to be tempered to

bring mortar creme out upto surface using white cement including rounding off junctions and

extending them upto 15 cm along the wall,clearing with water and oxalic acid etc. as directed

Providing and fixing Kota Stone Shelf of size 1.00 m wide × 0.45 m high using approved

quality polished green Kota stone slab 25 mm thick, including machine polishing, half-round

edge finishing, cutting to required size, fixing in cement mortar with suitable adhesive, making

groove/chase in existing masonry wall for embedding the shelf, making good the damaged

surface with cement mortar, curing, finishing, and all labour, materials, tools, tackles,

transportation and incidental charges complete as directed by the Engineer-in-Charge.

Providing erecting and fixing double coated Syntex PVC. (ISI) water tank of required capacity

each with all necessary fittings and connection etc. complete on terrace.

Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe (SCH- 40) for

cold water including fittings make as approved by Engineer In Charge. Pipe shall be fixed on

54 the wall with the help of clamp at every two metre C/C or shall be concelled as directed 90.00 Rmt 148.12

including necessary fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for

cold water including fittings make as approved by Engineer In Charge. Pipe shall be fixed on

55 the wall with the help of clamp at every two metre C/C or shall be concelled as directed 96.00 Rmt 91.84

including necessary fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( SCH- 40) for

cold water including fittings make as approved by Engineer In Charge. Pipe shall be fixed on

56 the wall with the help of clamp at every two metre C/C or shall be concelled as directed 72.00 Rmt 72.65

including necessary fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Providing, laying and jointing in true line and level 160 diametre U.P.V.C (Type B)

conforming to IS 13592-1992 with one end plain and other end socketed with rubber ring, &

fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe

shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of

PVC clamp of the size 160 mm diametre x 210 mm length x 196 mm heigh at every 2000 mm

center to center or shall be concealed in walls as directed including necessary fittings such as

bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement

including cost of all materials.

Providing and fixing cast iron spigot and socket soil, waste and ventilating pipes of the

following nominal size.(C) 100mm dia.

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter with jali of

59 the following nominal diameter of self cleansing design with C.I scread down or hinged 18.00 No 586.27

grating including the cost of cutting and making good the walls.

Provision, Supplying and fixing White vitrious ching W.C. sqatting pan Orrisa type 580 x

60 size with 100mm P or S trap, 25mm dia. C. P. Brass flush valve and G. I. inlet connection etc. 6.00 No 1,638.03

comp. (A) Vitreous ching long pattern white or color.

61 Providing and fixing brass screw down stop tap.(A) 15mm dia. 18.00 Each 205.83

Name of Work: Construction to Various Aganvadi Building of Santrampur Taluka Package No 8 under WCDD 4235 Year

2026-27 Dist: Mahisagar. (Total-6 Unit , Plan-2)

BILL OF QUANTITIES

Item Description Qty. Unit Rates Amount

Providing and fixing screw down bib taps of following size.(A) Brass screw down bib tap

polished bright. (i) 15mm dia.

Providing and fixing ball cock of approved. quality as directed.(A) Copper Metal (ii) 50mm

Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S. brackets

64 painted white including sutting holes and making good the same but excluding fittings.(A) 12.00 Each 1,451.48

Vitreous China:(ii) Flat Back washbasin 550 mm x v 400mm size. (i) In white colour.

Providing and fixing Kitchen sink with C.I. or M.S. brackets, painted white including cutting

65 holes in walls and making good the same but excluding fittings. (C) Vitreous China Sink.(i) 6.00 Each 2,326.66

600mm x 450mm x 150mm size

66 Providing and fixing C.P. brass waste for washbasin or sink. (A) 32mm dia. 18.00 Each 67.91

67 Providing and fixing M.I. fisher union for washbasin or sink. (A) 32mm dia. 18.00 Each 78.75

Providing and fixing 600mm x 450mm bevelled edge mirrror of superior glass mounted on

68 6mm thick A.C. sheet or plywood sheet and fixing to wooden pluge with C.P. brass screws 6.00 Each 859.41

Providing and fixing pillar tap, capstan head, screw down high pressure with screws, shanks

and back nuts. (i) 15mm dia.

70 Providing and fixing Rubber plug for sink or wash basin. 18.00 Each 17.15

Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and water tight

71 C.I. cover with frame of 300mm x 300mm size (inside) with standard weight (i) Square mouth 6.00 Each 1,246.92

traps (B) 150mm x 100mm size P or R type

Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with

bricks having crushing strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with frame

(Light duty) 455mm x 610mm intenal dimensions total weight of cover with frame to be not

less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4

mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm size) foundation concrete

1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished smooth with a floating coat

of neat cement on walls and bed concrete etc. complete.(i) Inside dimensions 455mmx 610mm

and 450mm deep for single pipe line.

Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with

bricks having crushing strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with frame

(Light duty) 455mm x 610mm intenal dimensions total weight of cover with frame to be not

less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4

mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm size) foundation concrete

1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished smooth with a floating coat

of neat cement on walls and bed concrete etc. complete.(ii) Inside dimensions 500mm x

mm and 450mm deep for pipe line with one or two inlets.

(B) Providing sock pit of 5.00 Cu.M. Volume including excavating and filling brickbats with

74 dry masonry work at top for 45cm. height including covering the top with stone including 6.00 Each 3,457.27

providing vatas in C.M. 1:3 with finishing curing etc. complete as directed.

Constructing a cooking platform 70 cm. width and 70 cm high resting on B.B.Masonry walls

23 cm.thick in C.M.(1:6) with (ii) Fixing black kadappa stone 30mm thick laid on precast

R.C.C. (1:2:4) slab with plastering on exposed faces of wall in C.M. (1:4) etc complete.as

directed by engineer In charge

Providing and fixing foldable MS ladder having 0.90mt wide & 3.60mt long including rod

76 hinge arrangment at middle with ladder including one coat of red oxide & two coats of oil 6.00 Each 5,555.00

paint etc completed as directed by Engineer incharge

Providing & erecting open well type horizontal mono block pump set with stainless steel body

having following specification (A) 0.5 H.P. single phase open well motor pump set having

discharge of 115 LPM @ 15 mtr. head suitable for 32 mm dia. delivery pipe with control panel

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are

of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr

length , in below type of pipe erected with 6A Modular type switch / bell push & accessories

and earth continuity of following type, erected on PVC / Metallic/Wooden box, single

78 mounting base frame covered with textured/metallic/white front plate modules erected on / in 72.00 Pt. 407.03

wall / ceiling as per pipe erected, with necessary Lamp holder/ceiling rose / H.D.Connector as

(c) with oval conduit /PVC casing capping double lock type erected flushed on wall/ceiling

complete. iii) Cat.: III

Name of Work: Construction to Various Aganvadi Building of Santrampur Taluka Package No 8 under WCDD 4235 Year

2026-27 Dist: Mahisagar. (Total-6 Unit , Plan-2)

BILL OF QUANTITIES

Item Description Qty. Unit Rates Amount

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of .ISI

marked 1.1 KV Grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in

below type of pipe erected with 6A Modular type switch and hum free EME step type

electronic fan regulator mounted and accessories with earth continuity of following type

79 erected on PVC / Metallic/Wooden box, single mounting base frame covered with 12.00 Pt. 595.90

textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe erected.

with necessary ceiling rose / H.D.Connector as directed.

(c) with oval conduit /PVC casing capping double lock type erected flushed on wall/ceiling

complete. iii) Cat.: III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in

below type of pipe erected complete with Modular type switch & 5 pin Plug erected on PVC

/ Metallic/Wooden box covered with appropriate front plate modules erected on / in wall /

80 ceiling as per pipe erected with following type of accessories. 6.00 Pt. 431.27

[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby switchboard / mcb db

(c) with oval conduit /PVC casing capping double lock type erected flushed on wall/ceiling

complete. iii) Cat.: III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in

below type of pipe erected complete with Modular type switch & 5 pin Plug erected on PVC

/ Metallic/Wooden box covered with appropriate front plate modules erected on / in wall /

ceiling as per pipe erected with following type of accessories.

[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb db board.

(c) with oval conduit /PVC casing capping double lock type erected flushed on wall/ceiling

complete. iii) Cat.: III

Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket erected

on PVC / Metallic/Wooden box, single mounting base frame covered with textured /

metallic/white front plate modules erected on / in wall / ceiling with following type

accessories. iii) Cat.: III

Supplying and erecting approved make of tube fitting with One no T-5 tube 24/ 28 W with

Electronic ballast with each tube separately THD less than 10 & built in adaptors, GI / PVC

83 housing & mirror optic reflector, suitable to work on 120V - 300V, A.C. supply with 18.00 Ea. 480.76

connector and adapter if required. [Make of fitting & tube may be differ& fitting shall be

providing with tube]. ii) Cat.: III

Providing & erecting Approved make Ceiling Fan with double ball bearing ISI mark with

84 condenser A.C.230V 50c/s. 1400 mm. sweep complete, canopy erected on existing hook or 12.00 Ea. 1,738.21

clamp with earthing [ Make shall be approved by Engineer in Charge]

Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down rod erected

duly painted for fan complete with proper insulation without leakage and earthing.

Replacing approved make fan regulator resistance type for Ceiling fan {credit of D.M. retained

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA/ aluminium die cast powder coated and high U.V. &

corrosion resistance with diffuser with company mark/name 160V to 270V, Power Factor

more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges

of Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.)

(v) 36-40 Watts, Surge-2 KV, IP-20, conventional 4 feet iii) Cat.: III

Supplying and erecting led lamps with following wattage capacity of 220 to 240 voltage,

minimum 15000 burning hours life, 500 V in built-surge protection,Polycarbonate diffuser,

88 mounting suitable for E14 / E27 / B22 lamp holders, pf >= 0.5 54.00 Ea. 258.56

(A) LED Lamps integral type, with PC diffuser suitable LAMP holder

(iv) 16 to 20 watts

Name of Work: Construction to Various Aganvadi Building of Santrampur Taluka Package No 8 under WCDD 4235 Year

2026-27 Dist: Mahisagar. (Total-6 Unit , Plan-2)

BILL OF QUANTITIES

Item Description Qty. Unit Rates Amount

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe to be erected concealed in /flushed on

wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green

colour for earth continuity of following size

(B) With 16 swg HGS metal conduit pipe and accessories painted black.

(b) 2 wire 2.5 sq. mm

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate on

90 240 V A.C. system and having breaking capacity 10 KA to be erected in existing box. 18.00 Ea. 112.11

confirming to IS 8828/1996 with ISI Mark. iii) Cat.: III

Providing & erecting 240 V MCB double pole switch for lighting Load (B Curve) having

91 KA breaking capacity & confirms to IS : 8828 in existing box having following capacity 6.00 Ea. 295.93

(B) 40 Amp. iii) Cat.: III

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface

mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 &

92 IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be used 6.00 Ea. 867.59

of same company of MCB to be used) suitable for

(A) single phase incoming and horizontal single phase outgoing (iv)12 way

Providing and erecting Approved make RCCBs conforming to IS: 12640 and having

sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and suitable for operation

on single phase 240 V,50Hz. having characteristic of quick action & tripping with all advance

feature & do not incorporate any electronic component. for following Max. rating erected as

(ii) 40Amps. DP. iii) Cat.: III

Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing

Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free hot

dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron galvanising, Inner

pipe dia of 25 mm having 200-250 Micron galvanising, connection terminal dia of 12mm with

constant ohmic value surrounded by highly conductive compound with high charge dissipation

suitable for following type of applications with chamber and heavy duty cover.

(A) (approved make OEM has to submit test certificate including value of earth resistance of

installation duly stamped and signed by agency and officer Incharge has to ensure the value of

earthing resistane mentioned in test Certificate) & having back filling compound of (B) Inner

chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter testing as per IEC 62561-2017,

Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%(C) Back fill Compound

:- Earthing compound should be capable to retain moisture for long time Necessary test report

must be submitted by Agency.

(a) For Electrical Installation up to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

Providing and erecting decorative wall bracket fittings complete with LED lamp and rust free

fittings components mounted in chrome finish housing with holder ,clear/opaque glass diffuser

complete erected with lead wires with minimum 15 wattage capacity as per instruction

engineer incharge /architect /authority .cat-III

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper

96 conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe 30.00 Rmt 215.13

at road crossing or floor of following size of cable. (A) 3 core 2.5Sq. Mm

Providing and creating educational information, learning charts, child-friendly graphics,

alphabet charts, number charts, village scenes, thematic illustrations, photographs and other

approved designs directly on wall surfaces by hand painting using approved quality weather-

97 resistant acrylic/emulsion paints of required shades and colours, including surface preparation, 202.80 Sq.m 353.50

sketching, lettering, artistic work, colouring, finishing wherever required, and all labour,

materials, scaffolding, tools & tackles, transportation and incidental charges complete as

directed by the Engineer-in-Charge.

Name of Work: Construction to Various Aganvadi Building of Santrampur Taluka Package No 8 under WCDD 4235 Year

2026-27 Dist: Mahisagar. (Total-6 Unit , Plan-2)

BILL OF QUANTITIES

Item Description Qty. Unit Rates Amount

Preparing and making Scribble Wall on wall surfaces using approved green chalk paint

finishing, which is suitable for writing and drawing. Cost include surface preparation, cleaning

and smoothening, application of required primer or base coat when needed and finally

applying the approved green chalk paint for making a smooth, durable and uniform writable

surface. The above work will include finishing of border, labour, materials, tools, scaffolding,

transportations, etc., all included as per directions by the Engineer-in-Charge.

Providing and fixing Fabric Finished Pin-Up Board of approved quality and size with fabric

covered soft board/cork board surface mounted on suitable backing material and frame,

including necessary base fittings, screws, fixtures, supports and all accessories required for

complete installation as per approved drawing and specifications. The rate shall include all

materials, labour, tools & tackles, transportation and incidental charges complete as directed

by Engineer-in-Charge.

Providing and fixing Child Height Measuring Scale / Growth Chart of approved quality

having measuring range of approximately 0.30 m to 1.50 m or as approved, made from durable

printed P.V.C./sunboard or equivalent market available material with clear graduation

100 markings in centimetres and child-friendly graphics, having smooth finished edges and 6.00 Each 1,515.00

complete with necessary fixing arrangements, screws, adhesive and accessories including all

materials, labour, transportation and incidental charges complete as directed by Engineer-in-

Providing and fixing PVC Modular Kitchen Cabinet Consisting of base and wall units made

from high quality rigid PVC boards (Minimum 15-18 MM thick) including shutters

shelves,drawers,SS hinges, telescopic channels,handles,magnetic locks, necessary

fittings,cutting, fixing complete as oer design and direction of Engineer in charge

Providing, supplying, installing, testing and commissioning LED Display Screen of approved

make/brand having minimum 32 inch screen size or as approved, Full HD (1920 × 1080)

resolution, LED display technology with inbuilt speakers, HDMI and USB connectivity, wall

mounting arrangement with necessary brackets, power cable, remote control and all accessories

required for complete installation and proper functioning including transportation, labour,

testing and commissioning complete as directed by Engineer-in-Charge.

Constructing brick masonry Junction Chamber with bricks having crushing strength not less

than 35kg/ Sq.cm in C.M. 1:4 C.I. cover with frame 300mm x 300mm internal dimensions,

103 foundation concrete 1:3:6 inside plaster 10mm thick with cement mortar 1:3 finished smooth 6.00 Each 1,567.56

with a floating coat of neat cement on walls and bed concrete etc. complete. (I) Inside

dimensions 300mm x 300mm and 600mm deep for pipe lines with one or more inlets.

Providing and supplying in standard length ISI mark rigid unplasticised PVC pipes suitable for

potable water with ring fit joint including cost of rings, as per IS specification no. 4985/1988

including all local and central taxes, transportation, freight charges, octroi, inspection charges,

loading, unloading, conveyance to the departmental stores and including cost of jointing

104 meterial etc. complete. 36.00 Rmt 67.97

1.) One coupler / ring shall be provided with each full length pipe cost of which is included in

A) Test Pressure 4 Kg/cm2. 1) 63mm

Providing and supplying in standard length ISI mark rigid unplasticised PVC pipes suitable for

potable water with ring fit joint including cost of rings, as per IS specification no. 4985/1988

including all local and central taxes, transportation, freight charges, octroi, inspection charges,

loading, unloading, conveyance to the departmental stores and including cost of jointing

105 meterial etc. complete. 150.00 Rmt 191.90

1.) One coupler / ring shall be provided with each full length pipe cost of which is included in

A) Test Pressure 4 Kg/cm2. 4) 110mm

Name of Work: Construction to Various Aganvadi Building of Santrampur Taluka Package No 8 under WCDD 4235 Year

2026-27 Dist: Mahisagar. (Total-6 Unit , Plan-2)

BILL OF QUANTITIES

Item Description Qty. Unit Rates Amount

Providing and supplying at store or site of work incl. freight, loading, unloading, stacking,

insaurance & all taxes etc. complete

A.) P. V. C. Couplers 10 Kg/cm2 (Moulded) 4.) 110mm

Providing and supplying at store or site of work incl. freight, loading, unloading, stacking,

insaurance & all taxes etc. complete

E.) P. V. C. Tee (Moulded) 9.) 110mm x 110mm

Providing and supplying at store or site of work incl. freight, loading, unloading, stacking,

insaurance & all taxes etc. complete

J.) P. V. C. Bend 900 (Moulded) Light 4.) 110mm

Ball or stop Valves:

Threaded ends, Metallic to PVC, PVC wedge PVC seat rings. 1.) 50mm

Providing and constructing a Filter Chamber of internal size 2.00 m × 1.20 m × 1.20 m depth

for Rainwater Harvesting, including excavation in all types of soil, providing and laying PCC

bed in C.C. 1:3:6, constructing chamber walls with bricks having crushing strength not less

than 35kg/ Sq.cm in C.M. 1:4 , internal plaster in C.M. 1:3 (10 mm), providing and fixing inlet

and outlet PVC pipes with necessary fittings, supplying and filling filter media in layers

consisting of pebbles, gravel, coarse sand and charcoal as per design,backfilling around

chamber, curing, finishing and all materials, labour, tools, equipment and required to complete

the work as directed by the Engineer-in-charge.

Constructing a Percolation Soakwell having internal size 1.50 m × 1.50 m × 2.00 m depth for,

including excavation in all types of soil, dressing and leveling the bottom, providing and

laying plain cement concrete 1:3:6 for the foundation bed, constructing brick masonry in

cement mortar 1:5 for the well wall to the full height, finishing internal joints, providing weep

holes as required, supplying and filling the well with graded grave in layers to the required

height, including providing and casting a reinforced cement concrete top slab 150 mm thick

with necessary reinforcement and including cost of formwork, providing opening/cover as per

design, backfilling around the well with selected earth, consolidation, curing, cleaning, and all

materials, labour, tools, plants, scaffolding and incidentals required to complete the work as

per detailed drawing and as directed by the Engineer-in-Charge.

Supplying & erecting carbon dioxide (CO2) fire extinguisher user of following capacity with

112 necessary clamps made from 50 x 6 mm M.S. Flat with nut & bolts grouted in wall complete. 6.00 Each 6,591.26

[A] For 4.5 Kg Capacity

Supplying & erecting ABC powder type 'Ceasefire' type Fire extinguisher as per IS 13849 or

Kg capacity with necessary clamp for erection on wall

Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful

materials and disposing off the excavated stuff upto 50 Meter lead.(C) Hard Murrum

Providing and laying controlled cement concrete M-250 and curing complete including the

115 cost of form work but excluding the cost of reinforcement for reinforced concrete work in (D) 4.38 cu.m 8,254.98

Columns up to Plinth Level.

Filling available excavated earth (excluding rock) in trenches ,plinth, sides of foundations

116 etc.in layers not exceeding 20cm in depth consolidating each deposited layer by ramming & 89.10 cu.m 136.92

Providing and laying controlled cement concrete M-200 and curing complete including the

117 cost of form work but excluding the cost of reinforcement for reinforced concrete work in (D) 6.30 cu.m 8,238.86

Columns on Ground Floor.

Providing and laying controlled cement concrete M-200 and curing complete including the

118 cost of form work but excluding the cost of reinforcement for reinforced concrete work in (C) 3.18 cu.m 5,970.27

(i) Half brick masonry in common brunt clay building bricks having crushing strength not less

119 than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -coarse sand ) in foundation and 126.00 Sqmt 629.84

plinth (B) Conventional

Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give

120 an required shape even shade after thoroughly brushing the surface to remove all dirt, and 330.12 Sqm 120.27

remains of loose powdered materials etc. complete

Name of Work: Construction to Various Aganvadi Building of Santrampur Taluka Package No 8 under WCDD 4235 Year

2026-27 Dist: Mahisagar. (Total-6 Unit , Plan-2)

BILL OF QUANTITIES

Item Description Qty. Unit Rates Amount

Steel work, welded in built up sections framed work including cutting, hoisting, fixing in

position and applying a priming coat of red lead paint. (A)In beams and joists, channels angles

Tees, flats, with connecting plates or angle cleats as in main and cross beams. Hip and jack

rafters, purlins conneted to common rafters and the like

Painting two coats (excluding priming coat) on new steel and other metal surface with enamel

122 paint, brushing, interior to give an even shade including cleaning the surface an even shade 22.50 Sq.m 92.27

including cleanicn the surface of all dirt, dust and other foreign matter.

Providing and fixing pre-cast concrete kerb stone of gray cement based concrete block 30cm

length,30cm height and 15cm thick of M200 grade concret as per approved design and

including excavation for fixing in proper line and level,filling the joint with C:M 1:3

(1cement:3fine sand) etc complete.

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete block 60mm thick

with grade of concrete M300 pnumatic compressed / vibrated mechanically and as per

124 approved design Confirming to IS 15658 : 2006 including 35 mm Sand layer for levelling and 72.78 Sq.m 706.77

filling the joint with sand in proper line and level as per guidlines of IRC : SP 63-2018 etc.

Filling in plinth with sand under floors including watering ramming, consolidating and

dressing complete.

Amount in Rupees: Eighty Seven Lakhs Fifty Five Thousund Three Houndred Seven Eight & Thirty One Paisa Only

(A) Total Tendered Amount Rs.:

(B) Rebate on Tendered Amount (if any) _______% (in Figures) Rs.:

(C) Net Tendered Amount (A – B) Rs.:

(* Please strike out whichever is not applicable).

1. All work shall be carried out as per public works Department Handbook and other specifications of Division or as directed.

2. All the columns is Schedule should be filled in ink and the total of the entries in the last column should be struck by the contractor under his

3. Rates quoted include clearance of site (Prior commencement of work and as its close) in all respects and hold good for work under all

4. To be Continued on additional sheets, if found necessary.

5. 1.00 % of Construction cost shall be deducted form Bill. Amount of Contract as per the Building and other Construction worker's welfare cess

6. Credit of dismantled materials of amount of Rs.2500 must be recovered from Contractor's first R.A Bill.

7. For abnormal high or law rates payment of such items shall be regulated as per Govt. circular No. PARACH / 102008 / 61 / S, Dt. 27/11/2008

8 The contractor shall exhibit a board as per Government Circular No. Vernacular TNC/1090/24/S dated 05.03.2011 with details specifications

9 Testing of material shall be done as per statement attached with specification. The material should be tested in GERI or Private laboratory

10 In all R.C.C. items in rate analysis, standard cement consumption has been taken as per Govt. GR. PRC- 10/ 2017/ Cement Consumption/ 16/

11 The Contractor is solely responsible to bare all applicable taxes i.e. GST etc. & department will not entertain any contractor representation to

Dated Signature of the Contractor :

Deputy Executive Engineer Divisional Accounts officer Executive Engineer

R & B (P) Sub Division R & B (P) Sub Division R & B (P) Sub Division

Santrampur Mahisagar Mahisagar