CA NO. CWE /HILLS /RKT/68 OF 2021-2022 ADDN/ ALTN CUM SPECIAL REPAIRS TO CERTAIN OFFRS/JCOs/OR MD ACCN AT HALDWANI UNDER GE RANIKHET

Amount

Demolition of cement concrete in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed.

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Demolition of brick work in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L for brick work with sub class 'B' bricks using old size bricks straight on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

M&L for brick work with sub class `B’ bricks, straight on plan to any radius in half brick thick walls, built in CM 1:4 complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed.

M&L for RCC 1:2:4 type B-1 20mm graded stone aggregate as in slabs supported on walls, beamsand columns in floors,roof, landing, balconies, canopies, deck slabs and in the shelves and the like complete all as specified and directed.

M&L for form work to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work n.exc. 200 mm thick to rough finished (horizontal or sloping ) complete all as specified and directed.

M&L precast reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in cover slabs (for manholes etc), shelves and similar articles with plain faces including necessary moulds and setting in cement mortar 1:6 including necessary form work complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shspe required incl cranking, bending spirally for hooping for coloumns, hooking ends andbionding with (annealed) not less than 0.90 mm dia complete all as specified and directed.

M&L for 16 to 18mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over screed bed of 15 mm thick 1:6 complete all as specified and directed.

M&L for Marble work 16 to 18mm thick (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade, rounding off edges and bull noosing of all external edges including screed bed or bedding layer of 15 mm thick in cement mortar 1:6 and pointed in white or coloured cement to match complete all as specified and directed.

M&L for Mirror polished Kota Stone slab flooring 18 - 20 mm thick over cement screed bed 15mm thick 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engineer-in-Charge.

M&L for mirror polished Kota Stone slab 18-20 mm thick in riser of steps, skirting, dado and, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab, rubbing and polishing including screed bed or bedding layer of 15 mm thick in cement mortar 1:6 and pointed in white or coloured cement to match complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B-0 (12.5mm graded stone aggregate) as in level course with finished cement concrete surface even and rough to receive screed bed complete all as specified and directed.

M&L for joint free non-skid coloured ceramic tiles 7 to 10 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but n exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed or bedding Layer in cement mortar 1:6 complete all as specified and directed.

M&L for joint free non-skid coloured ceramic tiles 7 to 10 mm thick (square/ rectangular) area of each tile exc 0.18 sqm but n exc 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed or bedding Layer in cement mortar 1:6 complete all as specified and directed.

M&L for joint free non-skid coloured ceramic tiles 7 to 10 mm thick (square/ rectangular) area of each tile exc 0.18 sqm but n exc 0.36 sqm in skirting/ dado or verticle surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick plaster in CM 1:4 complete all as specified and directed.

M&L for glazed printed coloured ceramic tiles in verticle surfaces 450 x 300 x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick plaster in CM 1:4 complete all as specified and directed.

M&L for Vitrified tiles 8 to 10 mm thick light shade (square/ rectangular) polished, area of each tiles n exc 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed or bedding Layer in cement mortar 1:6 complete all as specified and directed.

M&L for Vitrified tiles 8 to 10 mm thick light shade (square/ rectangular) polished, area of each tiles n exc 0.36 sqm, in skirting/ dado or verticle surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick plaster in CM 1:4 complete all as specified and directed.

M&L for cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10cm girth complete all as specified and directed.

Taking up or down 15mm dia steel tubing and connections by disconnecting fittings/ tubing from existing tubing were required including cleaning for refixing or removal from site complete all as specified and directed.

Taking up or down 20mm dia steel tubing and connections by disconnecting fittings/ tubing from existing tubing were required including cleaning for refixing or removal from site complete all as specified and directed.

Taking up or down 25mm dia steel tubing and connections by disconnecting fittings/ tubing from existing tubing were required including cleaning for refixing or removal from site complete all as specified and directed.

M&L for 15mm bore GI tubing, medium grade, galvanised with and including all GI fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

M&L for 20mm bore GI tubing, medium grade, galvanised with and including all GI fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

M&L for 25mm bore GI tubing, medium grade, galvanised with and including all GI fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

S&F in repair 15 mm bore bib taps, chromium plated cast copper alloy with Capstan head, screwed down, screwed for iron pipe or for brass ferrule with flange fixed complete all as specified and directed.

S&F in repair 15 mm bore brass chromium plated basin Mixer valve hot and cold screwed down for iron pipe complete all as specified and directed.

S&F 15mm bore angle cock, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F 20mm bore brass ball valve, quarter turn, femaled threaded, screwed both ends for iron pipe for unions, complete all as specified and directed.

S&F 25mm bore brass ball valves, quarter turn, femaled threaded, screwed both ends for iron pipe for unions complete all as specified and directed.

S&F Toilet cabinet Mirror of size 400 x 500 made out of 2mm thick acrylic sheet with internal shelves and openable shutters incl 10mm dia aluminium /brass CP rod complete all as specified and directed.

S&F brass chromium plated 125mm size shower rose with swivel joints, including fixing to steel pipe or union complete all as specified and directed.

S&F 20 mm dia, CP brass tubular towel rail, D type with CP Brackets, 600 mm long between flanges complete all as specified and directed.

S&F soap dish CP brass complete all as specified and directed.

S&F peg set of 6 of aluminium anodised complete all as specified and directed.

S&F glass shelf 450 x 125 x 6mm with ABS Bracket chromium plated bracket guard and SS railing complete all as specified and directed.

S&F corner glass shelf 300mm with ABS Brackets 300 x 600mm complete all as specified and directed.

S&F 15 mm bore brass CP wall mixer for mixing hot & cold water (3 in 1) screwed down for iron pipe and fixed complete all as specified and directed.

S&F 15 mm bore brass CP sink mixer with regular spout for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F 15 mm bore CP brass hand shower (health faucet) with 1 meter long easy flex tube in chrome finish and wall hook with NRV Back Flow Preventer complete all as specified and directed.

S&F 15mm bore bib taps sink cock swinging spout with flange chromium plated cast copper alloy with crutch or butterfly handle complete all as specified and directed.

S&F Towel Ring including necessary stain less steel screws, rawl plugs and washers complete all as specified and directed.

S&F stainless steel plate rack of size 24 x 30 x 10 inch of best quality including necessary stain less steel screws, rawl plugs and washers complete all as specified and directed.

S&F Stop valves,15mm fancy type, chromium plated with long shank and cup (concealed type) cast copper alloy,screwed down,high pressure,with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

Demolition of brick jack arches in cement mortar or cement lime mortar complete all as specified and as directed.

M&L for 15mm thick cement plaster as in sunken portion of WC/Bath room using CM (1:4) on fair faces of concrete surfaces using WPC where ever required as per manufacturerer's instructions and finishing the surface even and smooth (using extra cement) etc. incl finishing even and fair complete all as specified NOTE -WPC shall be measured and paid separetely.

M&L for 40mm thick PCC 1:2:4 type B-0 as in Sunken Portion of WC/Bath room (using 12.5mm graded stone aggregate) complete all as specifed and directed.

M&L for lean conrete with 1:5:10 mix using 40mm graded brick coarse aggregate in sunken Portion of WC/bath room complete all as specified and directed.

M&L for cleaning surface of Sunken Portion of WC and applying a coat of bitumen primer @0.30 Kg/Sqm and thereafter applying a tack coat of industrial bitumen 85/25 grade @ 1.20 Kg/Sqm and provn of APP based polymeric membrane minimum weighing 3.00Kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric (Wt not less than 150 gms/sqm) laid on bituminous surfaces by forced application over entire roof area, with side lap not less 100mm and end lap not less than 150mm complete all specified and directed.

S&F in repair vitreous china squatting pan, orissa pattern including CI spun trap, size 580 x 440 mm white, with integral foot rests squat pattern closet also includes setting the trap and pan in lime concrete (1 lime, 2 sand or surkhi and 5 aggregate), minimum 150mm thick all round and finished just below level of rim of pan to receive the floor finishing (thickness as indicated) and making good floor complete all as specified including cutting to the flush pipe and necessary repair to the floor complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white/coloured (including fixing bolts & flush pipe, plastic water closet seat,black, closed pattern with bottom, and cover and mild steel chromium plated or aluminised hinging device etc.) complete all as specified and directed.

S&F in repair PVC Flushing cistern 10 litre capacity, low level valve less, symphonic action type, white, with Inlet, ball valve, float and handle including 32mm dia PVC flush pipe, a pair of MS Brackets,CP flush bend including cutting and pinning in ends, making good disturbed surfaces in cement mortar 1:3 including complete all as specified and directed.

S&F wash hand basin of vitreous china counter sunk size 450mm x 350mm x 150mm, PVC waste pipe 32mm dia, waste coupling brass chromium plated and including cutting complete all as specified and directed.

S&F in repair 450mm x 300mm size, vitreous china wash basin, white, flat back, including brackets, PVC waste pipe 32mm dia, waste coupling brass, chromium plated and including cutting and pinning in ends of brackets or erecting stand, fixed complete all as specified and directed.

S&F sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F sink with out drainage board made of stainless steel 0.75mm thick kitchen or laboratory, overall size 430mm x 510mm, bowl size 430mm x 380mm x 203mm complete all as specified and directed.

S&F PVC Connections 15mm size with PTMT Nuts of length 600mm and fixed complete all as specified and directed.

Dismantling of PVC/ CI pipe 100mm bore jointed in cement mortar and taking out of trench if required complete all as specified and directed.

Dismantling of PVC/ CI pipe 75mm bore jointed in cement mortar and taking out of trench if required complete all as specified and directed.

M&L for 100 mm bore cast iron soil spun pipe, waste or vent pipe in any lengths with or without ears, jointed with and including cement joints fixed to walls including necessary clamps etc. complete all as specified and directed.

M&L for 100 mm bore cast iron soil spun pipe, waste or vent pipe in any lengths with or without ears, jointed with and including cement joints laid in trenches or floor complete all as specified and directed.

M&L for 75 mm bore cast iron soil spun pipe, waste or vent pipe in any lengths with or without ears, jointed with and including cement joints fixed to walls including necessary clamps etc., complete all as specified and directed.

M&L for 75 mm bore cast iron soil spun pipe, waste or vent pipe in any lengths with or without ears, jointed with and including cement joints laid in trenches or floor complete all as specified and directed.

M&L for 50 mm bore cast iron soil spun pipe, waste or vent pipe in any lengths with or without ears, jointed with and including cement joints fixed to walls including necessary clamps etc., complete all as specified and directed.

S&F 100 mm bore CI spun bends of any radius, diminishing piece or tappers complete all as specified and directed.

S&F 75 mm bore CI spun bends of any radius, diminishing piece or tappers complete all as specified and directed.

S&F 100 mm bore CI spun branch piece, double (eaqual or unequal), with parallel branches and fitted with oval access door complete all as specified and directed.

S&F 100 mm bore CI spun branch piece, single (eaqual or unequal), with parallel branches and fitted with oval access door complete all as specified and directed.

S&F 75 mm bore CI spun branch piece, single (eaqual or unequal), ordinary or inverted spigot or socketted type with parallel branches and fitted with oval access door complete all as specified and directed.

S & F CI spun pipe cowl 50mm bore, complete all as specified and directed.

Extra over for 100 mm bore CI spun fittings if fitted with oval access door complete all as specified and directed.

Extra over for 75 mm bore CI spun fittings if fitted with oval access complete all as specified and directed.

M&L for extra over for 75 mm bore cast iron pipes and fittings if lead joint is provided in lieu of of cement joint complete all as specified and directed.

M&L for extra over for 100 mm bore cast iron pipes and fittings if lead joint is provided in lieu of of cement joint complete all as specified and directed.

S&F 75 mm dia CI floor tarps with grating including jointing to CI pipe with lead joint complete fixed, making joint water tight complete all as specified and directed.

Taking down chowkats or frames n.exc 1.50 sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down chowkats or frames exc 1.50 sqm but n.exc 4.00sqm eachwith shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down shutters of any description exc 1 sqm but not exc 2Sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 sqm but n exc 2 Sqm each and refixing in same opening complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing complete all as specfied and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification complete all as specfied and directed.

S&F powder coated anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specfied and directed.

S&F powder coated anodised aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specfied and directed.

S&F powder coated aluminium windows frame with aluminium side hung shutters including jointing cleat for fixing, glazing clip, beading and glazing plate, MS expansion fastners, neoprene gasket; 4.80 mm tinted glass panes, anodised handles 100 mm long (02 Nos for each shutter), anodised peg stay 150 mm long, anodised tower bolts 125 mm long (1 No for each shutter) and making good disturbed surface as per existing surface complete all as specfied and directed. Section of anodised windows shall be of following sizes: Chowkat/Frame: 63.5 x 38.1 x 1.47 mm thick fixed with rawl plug and GI screws. Note : Contractor has to make good all the jambs, cills and broken portion of wall while fixing of windows/Door in CM 1:3 or PCC 1:2:4. The rates for the same should be deemed to be included in the respective items.

S&F aluminium powder coated windows frame with aluminium side hung shutters including jointing cleat for fixing, glazing clip, beading and glazing plate , MS expansion fastners, neoprene gasket; stainless steel wiremesh 0.36mm nominal dia of wire and average width of aperture 1.40mm, aluminium powder coated handles 100 mm long (02 Nos for each shutter), aluminium powder coated peg stay 150 mm long, aluminium powder coated tower bolts 125 mm long (1 No for each shutter) and making good disturbed surface as per existing surface complete all as specfied and directed. Section of aluminium powder coated windows shall be of following sizes: Chawkat/Frame: 63.5 x 38.1 x 1.47 mm thick fixed with rawl plug and GI screws. Note : Contractor has to make good all the jambs, cills and broken portion of wall while fixing of windows/Door in CM 1:3 or PCC 1:2:4. The rates for the same should be deemed to be included in the respective items.

S&F powder coated designer grill of 5.5 mm dia and aperture of 75 mm fixed with and including aluminium powder coated flat section of size 50 x 1.5 mm and suitable aluminium anodised frame F/H section complete all as specified and directed.

S&F aluminium sheet powder coated of thickness not less than 4mm thick to be in sealed as panel in aluminium door including fixing complete all as specified and directed.

S&F 4.8 mm thick tinted glass and glazing with oil putty in squares exc 0.50 sqm in each pan complete all as specfied and directed.

S&F for door closer aluminium extruded section hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specfied and directed.

S&F framed work such as grills,gratings, etc with ends of bars shouldered and / or riveted or forged into spikes; framed guard ; barred iron doors; ladders ; framed balusters; walk ways; railing and simillar work onforming to Fe 290 Gde E-165 complete all as specfied and directed.

S&F steel windows with side hung shutters including box type hinge with steel handle, and steel peg stay incl 03 Nos Tower bolt 100mm, complete with glazing bars, dovetailed or welded and making good disturbed surface as per existing surface complete all as specified and directed.

S&F steel windows with side hung shutters including box type hinge with steel handle, and steel peg stay incl 03 Nos Tower bolt 100mm, complete without glazing bars, dovetailed or welded and making good disturbed surface as per existing surface complete all as specified and directed.

S&F steel ventilators with top hung shutters including hinges steel peg stay complete all as specified and directed.

S&F sheet glass 3mm thick, ordinary quality and glazing with oil putty in squares n exc 0.5 Sqm in each pane complete all as specfied and directed.

S&F 3 mm thick figured glass pin headed type and glazing with oil putty in square n. exc 0.5 sqm in each pane complete all as specfied and directed.

S&F in repair galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F 2nd class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints and making good disturbed surface as per existing surface complete all as specified and directed.

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing Fe 410-W Gde E250 complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 using 20mm graded stone aggregate for bed block for fixing hold fast complete all as specified and directed.

S&F bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

S&F 35mm thick flush shutters, solid core construction, with block board core and plywood face panesls, commercial type on bothe sides complete all as specified and directed.

M&L for 0.9mm thick decorative laminate type 1 of surface finish, colour and patters as approved, fixed with approved adhesive as per manufacturer's insturctions complete all as specified and directed.

S&F 35mm thick plain, frame 2nd class hard wood panelled shutter (any no of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified and directed.

S&F 35 mm thick glazed and skelton shutter open rebated and prepared to receive glass, gauge etc,(with out sash bars) edges of framing plain chamfered or rounded fitted with cut or mitred beads for securing glass etc. size of members of shutters as specified in SSR Part-I, Sec-8, clause 8.23(a) 2nd class hard wood (Shisham), 35mm thick shutter. complete all as specified and as directed

S&F 110 mm bore PVC (SWR) soil, waste and vent pipes single socketed including necessary fittings like socket, bend, elbow, single/double tee etc in any length with rubber ring joints fixed with clamps of flat iron and including bolts and nuts and securing ends of stays to wall or roof and making good disturbed surface as per existing surface complete all as specified and directed.

S&F decorative MS PVC coated tubular curtain rail of stainless steel 25mm dia including six nos curtain ring per running mtr and one number of brackets on each end and one no of globe on each end of the rod per opening of door/ window complete all as specified and directed.

S&F 18mm thick veneered decorative plywood, grade - 1 (with BWR resin) with decorative face venners on both faces fixed with screws to timber frame work, colour and pattern as approved including external teak wood lipping complete all as specified and directed.

S&F 2nd class hardwood small fittings such as brackets of any type, latch and hinge blocks, shaped door and widnow stops and the like, including all necessary labour; articles n exc 200 cu. cm each complete all as specified and directed.

S&F 250 mm long aluminium alloy, anodised, sliding door bolt with haps, staple (bolt type) and fixing clips with sheet, cast and extruded section and fixing bolt and sliding bolt of extuded sections or cast aluminium alloy and fixed complete all as specified and directed.

S&F 300 mm long aluminium alloy, anodised, sliding door bolt with haps, staple (bolt type) and fixing clips with sheet, cast and extruded section and fixing bolt and sliding bolt of extuded sections or cast aluminium alloy and fixed complete all as specified and directed.

S&F 150 mm overall length floor stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F 100 mm size aluminium handle, cast type anodised complete all as specified and directed.

S&F 150 mm size aluminium handle, cast type anodised complete all as specified and directed.

S&F in repair 150mm size hasp and staple of aluminium anodised complete all as specified and directed.

S&F 150 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 200 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 100 mm long butt hinges medium weight cold rolled mild steel complete all as specified and directed.

S&F 50 mm long butt hinges medium weight cold rolled mild steel complete all as specified and directed.

S&F 30 mm width of flaps (when open) continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed.

M&L for stainless steel telescopic channel for drawers not less than 45 cm long complete all as specified and directed.

S&F push to open magnetic catches for kitchen cabinet doors complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc raking out joints hacking for key scrabbing down water etc complete all as specified and directed.

M&L for 15mm thick cement plaster in CM 1:4 on fair faces of brick or concrete surfaces using WPC where ever required as per manufacturerer's instructions and finishing the surface even and smooth without using extra cement complete all as specified and directed. NOTE -WPC shall be measured and paid separetely.

M&L for rendering 15mm thick on fair faces of brick work in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 10mm thick in CM 1:3 on fair faces or concrete ceiling surfaces finished even and fair without using extra cement complete all as specified and directed.

Supply only water proofing compound complete all as specified and directed.

Demolition of cement concrete (reinforced), cutting scraping and cleaning reinforcement and M&L for providing RCC 1:2:4 type B1 using 20 mm graded aggregate including necessary form work and scaffolding upto 6.00 m height in chajjas, parapets, roof projections and similar RCC works complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of old wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new steel surfaces any description, over 10cm in width or girth,not otherwise applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of old steel surfaces of any description over 10cm width or girth and apply one coat of synthetic enamel paint complete all as specified and directed.

Preparing new plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion, white or tinted over & including a coat of primer complete all as specified and directed.

M&L for complete removal of existing surface and applying two coats of oil bound distemper over a coat of primer white or tinted on old decorated/ undecorated surfaces of wall complete all as specified and directed.

M&L for preparation new plastered or unplastered surfaces of ceiling and applying two coats of distemper oil emulsion paint complete all as specified and as directed.

M&L for complete removal of existing surface and applying two coats of oil bound distemper over a coat of primer on old decorated/ undecorated surfaces of Ceiling complete all as specified and as directed.

M&L for preparation of newly plastered wall surfaces and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M&L for complete removal of existing surface and applying two coats of cement base paint over a coat of primer on old decorated/undecorated surfaces of walls complete all as specified and as directed.

M&L for applying 2mm thick wall care putty on wall complete all as specified and directed.

M&L for applying 2mm thick wall care putty on ceilling complete all as specified and directed.

Dismantling of brick tiles or terracing tiles, single layer on roofs complete all as specified and directed.

M&L for providing PCC 1:2:4 type B-0 as in roof kerbs or mud stops rouded or chamfered on edges (using 12.5mm graded stone aggregate) complete all as specifed and directed.

M&L for 50mm thick (laid in two equal layer of 25 mm thick) in PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) including finishing even and fair as in roof padding and prepare surface to receive treatment complete all as specified and directed.

S&F 1.4mm dia galvanised steel wire netting 20mm X 20mm mesh size, made up into matteresses or cages, lapped, wired and laid in position, including fixed with tinned tacks of wire staples complete all as specified and directed.

M&L 40 mm thick brick tiles laid over and including 15mm thick bedding layer in cement mortar 1:6 and jointed, grouted and pointed flush in CM 1:3 mixed with STP WPC liquid @ 200ml of per 50 kg of cement complete all as specified and directed.

M&L except brick tiles laid over and including 15mm thick bedding layer in cement mortar 1:6 and jointed, grouted and pointed flush in CM 1:3 mixed with WPC liquid @ 200ml of per 50 kg of cement complete all as specified and directed.

M&L for cleaning surface of roof and applying a coat of bitumen primer @0.30 Kg/Sqm and thereafter applying a tack coat of industrial bitumen 85/25 grade @ 1.20 Kg/Sqm and provn of APP based polymeric membrane minimum weighing 3.060Kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric (Wt not less than 150 gms/sqm) laid on bituminous surfaces by forced application over entire roof area, with side lap not less 100mm and end lap not less than 150mm complete all specified and as directed.

Dismantling water tanks of capacity exc 250 but not exc 500 ltr capacity complete all as specified and directed.

S&F 750 ltrs capacity rotational moulded polythene water storage tanks tripple layer (cylindrical vertical with closed top) hoisted and fixed in postion and including 20mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe minimum weight 210 gram complete all as specified and directed.

S&F 1000 ltrs capacity rotational moulded polythene water storage tanks tripple layer (cylindrical vertical with closed top) hoisted and fixed in postion and including 20mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe minimum weight 210 gram complete all as specified and directed.

M&L for providing Precast cement concrete type B0 1:2:4 (12.5mm graded aggregate) set in CM 1:4 in louvers and jallies, 40mm thick (measured solid), including all moulding and interlocking pillar complete all as specified and directed.

S&F stairs (framed) including stringers, treades, landing, balusters, hand rails etc. including cleats brackets etc Fe 410-W (Gde-E-250) quality-A complete all as specified and directed.

M&L For Roof tiles, Mangalore pattern,interlocking at side joints on chhajja top , laid on 15mm thick screed bed or bedding in CM 1:4 complete all as specified and directed.

M&L for excavation in trenches not exc. 1.50m wide and not exc. 1.50m in depth for foundation etc or for manholes cesspits, shafts etc not exc 10 sqm on plan and getting out in hard / dense soil complete all as specified and directed.

M&L for removing excavated soil to a distance n.exc 50m where directed at a level n.exc 1.50m above the starting point complete all as specifed and directed.

M&L for Return filling , in including spreading , levelling , watering and levellng and well ramming in layers not exc 25 cm complete all as specified and directed.

Demolition and breaking up drain pipes (SGSW, AC or RCC) of internal dia 150mm, set in cement mortar complete.

M&L for cement concete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in bed to drain pipes of 160mm bore including packing under and haunching against the sides of pipe after they are laid and tested complete all as specified and directed.

M&L for unplasticised PVC pipe 160mm dia type 'B' with wall thickness 4mm (Min) of pressure rating 4 KN/Sqm laid in trenches and jointed with cement solvent including testing complete all as specified and directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concret 1:2:4 type B-1 smooth finished, and reforming benching as required, for internal dia of pipe 150mm complete all as specified and directed.

Excavating in post holes as in hard/dense soil (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and directed.

M&L Cement concrete 1:4:8 type D2 (using 40 mm graded aggregate) as in foundations filling and mass complete all as specified and directed.

S&F rolled mild steel sections channel angle Tee section and in tubular section as in main and cross beams, hip and jack rafters; purlins,post where connected to common rafters and running rails fixed with angle cleat or other connecting plates conforming to Fe 410-W Gde-E-250, quality A complete all as specified and directed.

S&F prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L 75mm thick PCC 1:3:6 type C2 using 40 mm aggregate in plinth protection including finishing even and smooth without using extra cement complete all as specified and directed.

M&L 75 mm thick PCC (1:4:8 ) type D-2 as in sub base finished even and rough complete all as specified and as directed.

M&L Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed.

M&L chequered concrete concrete tile 20cm x 20cm x 25 mm thick with white cement & pigment, set, jointed and pointed in neat cement slurry in floors, laid over 15 mm thick bedding layer in Cement Mortar 1:6 complete all as specified and as directed.

M&L for 75mm thick Plain Cement concrete type B-1, 1:2:4 (using 20mm graded aggregate) as in floors laid in bays and form work if any complete all as specified and as directed.

M&L for Forming contraction (Dummy) joints 65mm deep x 10mm wide with ceiling compound grade 'A' complete all as specified and as directed..

Taking down carefully aluminium/ copper wiring of any size (for light, fan, socket or power etc complete) including fixture and fittings such as switches, sockets, ceiling roses, pendent holders regulators, tube lights etc and making good disturbed surfaces of wall, roof etc to match with existing surface complete all as specified and directed.

Taking down unserviceable main switches MCB DB’s including MCB SP/ SPN/ TPN of any make and type including teakwood board etc complete and making good the disturbed surfaces including colour wash complete all as specified and directed.

M&L for point wiring for one light point/ fan point controlled by one, one way switch with 1.5 Sqmm size, PVC insulated and unsheathed 1100volts grade, single core stranded (multistrand) copper conductor (FRLS) PVC cable drawn into & including medium grade PVC conduit (not less than 20mm outer dia ) with all fittings and accessories fixed concealed (including chase cutting in brick/ stone masonry walls for fixing conduit and plastering and whitewash/colouring the external surface and matching the same with existing surface) and sunk cast iron or pressed steel terminal boxes for mounting fittings like switches, sockets & fan regulators etc with 3 mm thick plastic laminated sheet covers fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.5 Sqmm multistranded copper conductor cable earth wire and connected to earth dolly complete all as specified and directed. Note:- wiring shall be done in colour coding as directed by GE.

All as per item No.180 herein before but one light point controlled by one two way switch.

All as per item No.180 herein before but one socket outlet 5 Amps on the same board.

All as per item No.180 herein before but one 3 pin socket outlet 5 Amps independent.

All as per item No.180 herein before but one bell point controlled by one bell push switch.

All as per item No. 180 above but with 2.5 Sqmm two single core and 2.5 Sqmm one single core as earth wire for 5/15 Amps socket.

All as per item No. 180 above but with 4 Sqmm two single core and 2.5 Sqmm one single core as earth wire for 5/15 Amps socket.

S&F lamp holder (modular type) PVC insulated body with back plate for angle/ battern fitting complete all as specified and directed.

S&F switch piano flush type single pole, one way 5 Amp complete all as specified and directed.

S&F switch piano, flush type single pole 15 Amp complete all as specified and directed.

S&F switch piano flush type single pole, two way 15 Amp complete all as specified and directed.

S&F socket outlet 2 in 1, 3 pin, 5 and 15 Amp flush type complete all as specified and directed.

S&F socket outlet 2 in 1, 3 pin, 5 Amp flush type complete all as specified and directed.

S&F Bell push, flush type , 5 Amp complete all as specified and directed.

S&F steped type electronic fan regulator flush type on the existing phenolic laminatedsheet etc complete all as specified and directed.

S&F bell electric multi musical type AC 230 volts, 50 Hz complete all as specified and directed.

S&F 6 Amp one way switch, 1 module, modular type, white polycarbonate 250V, AC, 50Hz complete all as specified and directed.

S&F 6 Amp two way switch, 1 module, modular type, white polycarbonate 250V, AC, 50Hz complete all as specified and directed.

S&F 6 Amp 2/3 Pin combined socket shuttered, 2 module, modular type, white polycarbonate 250V, AC, 50Hz complete all as specified and directed.

S&F modular Switch 1 way 16 Amp, 1 Module, white polycarbonate 250V, AC, 50Hz complete all as specified and directed.

S&F modular socket 6A/16Amp, 2/3 pin combined, 2 Module, white polycarbonate 250V, AC, 50Hz complete all as specified and directed.

S&F 6 Amp bell push switch modular type, white polycarbonate 250V, AC, 50Hz complete all as specified and directed.

S&F steped type electronic fan regulator modular, 120W-2 module, white polycarbonate 250V, AC, 50Hz complete all as specified and directed.

S&F ceiling rose surface bakelite 3 terminal with base plate complete all as specified and directed.

S&F 2 Module, modular front plates, white with frame on existing boxes complete all as specified and directed.

S&F 3 Module, modular front plates, white with frame on existing boxes complete all as specified and directed.

S&F 4 Module, modular front plates, white with frame on existing boxes complete all as specified and directed.

S&F 6 Module, modular front plates, white with frame on existing boxes complete all as specified and directed.

S&F 8 Module, modular front plates, white with frame on existing boxes complete all as specified and directed.

S&F anodised rust proof 18 SWG MS box, size 75mm x 105mm x 50mm deep (1-3 Module) flush type of following sizes (to be of same make as modular switches and sockets) to be recessed in wall/ gypsum partition complete all as specified and directed.

S&F anodised rust proof 18 SWG MS box, size 75mm x 105mm x 50mm deep (4 Module) flush type of following sizes (to be of same make as modular switches and sockets) to be recessed in wall/ gypsum partition complete all as specified and directed.

S&F anodised rust proof 18 SWG MS box, size 75mm x 210mm x 50mm deep (6-8 Module) flush type of following sizes (to be of same make as modular switches and sockets) to be recessed in wall/ gypsum partition complete all as specified and directed.

M&L for Sub main wiring with 2 run of 10 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in to and including Rigid non metallic PVC conduit (ISI marked) Heavy grade, 20 mm dia (external) inclusive of junction/terminal boxes, all fittings and accessories fixed concealed with and including 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main DB including cutting and chasing and making good surface as original by plastering and whitewash/ colour/ distemper etc including taking down existing old sub main wiring complete all as specified. Note :1 The cost of earth wire is included in the quoated rates. 2. Two run of 10 sqmm, one run of 6 sqmm and one run of PVC conduit will be measured as one unit ie one running metre”

Material and labour for Sub main wiring with 2 run of 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in to and including Rigid non metallic PVC conduit ( ISI marked) Heavy grade, 20 mm dia (external) inclusive of junction/terminal boxes, all fittings and accessories fixed concealed with and including 4 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main DB including cutting and chasing and making good surface as original by plastering and whitewash/ colour/ distemper etc including taking down existing old sub main wiring complete all as specified. Note :1 The cost of earth wire is included in the quoated rates. 2. Two run of 6 sqmm, one run of 4 sqmm and one run of PVC conduit will be measured as one unit ie one running metre”

M&L for Sub main wiring with 2 run of 4 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in to and including Rigid non metallic PVC conduit ( ISI marked) Heavy grade, 20 mm dia (external) inclusive of junction/terminal boxes, all fittings and accessories fixed concealed with and including 2.5Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main DB including cutting and chasing and making good surface as original by plastering and whitewash/ colour/ distemper etc including taking down existing old sub main wiring complete all as specified. Note :1 The cost of earth wire is included in the quoated rates. 2. Two run of 4 sqmm, one run of 2.5 sqmm and one run of PVC conduit will be measured as one unit ie one running metre”

Supply and fixing LED lights fitting 1x 20W (warm/milky white as required on site), 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose and life of tube light not less than 50,000 hours complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high output diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F sheet metal enclosure for DBs (double door type) single pole and neutral 4 way including blanking plate as required with 200 Amps rated bus bar, 240 volts fixed complete all as specified and directed.

S&F sheet metal enclosure for DBs (double door type) single pole and neutral 8 way including blanking plate as required with 200 Amps rated bus bar, 240 volts fixed complete all as specified and directed.

Supply & Fixing 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN and current carrying capacity 32 Amp, in the DB complete with connection testing and commissioning complete all as specified and directed .

Supply & Fixing 240V, 10KA 'B' curve miniature circuit breaker (MCB) of single pole and current carrying capacity 5 to 32 Amp, in the MCB DB complete with connection testing and commissioning complete all as specified and directed .

S&F sheet metal enclosure with socket plug top and MCB single pole and netural enclosure with a two pin and earth plug and socket complete with one double pole MCB 20 Amp 240 Volts complete all as specified and directed .

S & F LED light fitting 1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

M&L for Cutting of existing wall and making the opening for exhaust fan 300 mm sweep (Finished size) incl plastering and matching colour of wall complete all as specified and directed.

M&L for XLPE insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade, cross section area 35 Sqmm 3.5 core laid in trenches or passing through pipes/ducts and incl the disturbence surface of road making good with using PCC complete all as specified and directed.

M&L for dry clean sand filling in trenches below and around under ground cable cushioning complete all as specified and directed. Note :- Thickness of sand cushioning shall be measured after punning.

M&L for brick sub class 'B' old size brick for protection of cable complete all as specified and directed.

S&F steel tube medium grade galvanised 32 mm bore with all fittings for protection of UG cable under road/culvert and fixing on wall with saddle, screw complete all as specified and directed.

M&L panel box concealed in wall, double door type with die cast type made all of 18 guage CRCA sheet of suitable size for fixing of KWH meters MCCB, MCB, Bus bars etc as per IE rules comprising of following and necessary wiring for MCBs, meters- 05 Nos. with Locking arrangements and optical glass over the electronic meter (a) S&F MCCB 100 Amps 415 volt, TPN, 25 KA - 01 No (b) S&F MCB SPN 63 Amps - 5 Nos (c) Space and mounting brackets for fixing of 5 Nos single phase KWH meters. (d) Fixing only the existing electronic meter as per existing sl No. of qtr.

M&L for earthing complete with galvanized sheet earth plate electrodes 60x60x6.3 mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of plat not less than 1.5 mtr below normal ground level connected to galvanized iron strip 25 x 4 mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No 3 and including excavation and earth work, GI pipe light grade 15 mm bore for protection of GI wire from earth electrode to and including the earth test point of galvanized Iron/ steel of size 75x75x25mm, supplying and laying charcoal dust, common salt, PCC 1:2:4 type B1 chamber and MS angle iron frame 40x40x3mm and RCC cover 40mm thick (1:2:4) type B1 using 20mm graded stone aggregate reinforced with 6 mm dia TMT bars @ 75mm C/C both ways with MS handle 12mm dia, PGI funnel and wire mesh, 20 mm dia GI pipe light grade for watering and connected to earth test point including brazing at all joints except at test point and testing complete all as specified and directed.

Taking down old LT U/G and service cable of any size from trenches/ protection pipe etc complete all as specified and directed.

Supply and Fixing propeller type AC ventilating fans 230 volts, 50 C/S heavy duty 1400 RPM, 300 mm sweep (Exhaust fan) metal body and blades protected by metal guards,Bird guard for safetry,two sleeves bearings, complete including the ragged bolts in wall, fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated three core white 23/.0076 copper cable, rubber insulated from ceiling rose to exhaust fan motor complete all as specified and directed.

Supply and fix water heater storage type electric supplied and installed complete of capacity 25 ltrs heating element upto 2 KW, BEE 5 Star rate complete with all accessories such as safety valve thermostat, NRV etc including making connection with industrical socket, ultra thick SS inner tank of superior 304 grade, Fire retardant ISI Mark supply cord, Rust & shock proof ABS body, Compact & easy to install and proper hanging on nut bolts washers grouted on wall and PVC pipe for connection of hot and cold water complete all as specified and directed by Engr-in-charge. make as specified in particular specifications.

M&L for preparation of newly plastered surfaces of wall applying a layer of wall care putty 2mm thick (averaging) , finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed.

M&L for complete removal of existing treatment by srapping down of old surface of wall applying a layer of wall care putty 2mm thick (averaging) , finishing walls with Acrylic Smooth exterior paint of required shade : (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed.

TEAM ACC INFRABUILD PRIVATE LIMITED

Prem singh kuwarbi and co