Internal painting and other improvement works in recreation centre, ESS-II multipurpose room and store at HWPM colony.

Amount

Providing and applying two or more coats of Distemper with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, including applying additional coats wherever required to achieve even shade and colour of Asian/ Nerolac or approved make and brand on old surface including cleaning of surface, scrapping of old loose paint, removal of nails etc. filling of the holes and cracks with approved crack filler, sand papering, removal of cob webs, cleaning etc., complete including all materials, labour, transport, scaffolding as and when required and cleaning of the rooms after completion of work etc., all complete as per specifications and as directed by the Engineer in Charge.

Providing and applying two or more coats of acrylic smooth exterior coating of Apex Ultima of M/s. Asian Paints/ Excel of M/s. Nerolac/ Heatshield of M/s. O.FIXIT/ Weathershield Max of M/s. ICI Delux or other approved equivalent make and shade over the plain plastered/ sand face / rough cast plaster/ RCC jalli / RCC fins at locations as required on old wall surfaces, applied @ 1.67 ltr/10 sqm. over and including priming coat of exterior primer applied@ 2.20 kg/ 10 sqm), ensuring an interval of 4-6 hours for each successive coats, including cleaning of surface, scrapping of old loose paint, removal of nails etc. filling of the holes and cracks with approved crack filler, sand papering etc., complete including all materials, labour, transport, scaffolding as and when required safety appliances insurance coverage to workers etc., all complete as per the manufacturer's specification and as directed by the Engineer in Charge.

Providing and applying one or more coat of water thinnable cement primer of approved brand and manufacturer on wall surface having VOC (Volatile Organic Compound) content less than 50 grams/litre , including all maiterial, labour, transport, scaffolding as and when required etc., all complete as per specification and as directed by Engineer in Charge.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to dumping yard in colony with all leads and liftsetc.,all complete as per specification and as directed by Engineer in Charge.

Providing and laying 12 mm thick cement plaster in cement mortar 1:4 (1 cement : 4 fine sand) proportion over Brick/ RR masonry/ Concrete walls, floors and other surfaces including , raking of joints, hacking the concrete surfaces, scaffolding where necessary, curing etc., all complete as per drawings, specifica-tions and as directed by the Engineer in Charge.

Providing and laying 18 mm cement plaster in two coat under layer 12 mm thick cement plaster 1 : 5 ( 1 cement : 5 corse sand ) finished with a top layer 6 mm thick cement plaster 1 : 6 (1 cement : 6 fine sand ) proportion over brick/RR masonary /concrete walls , floors and other surfaces, including providing and mixing approved water proof compound in the proportion recommanded by the manufacturer, raking of joint , hacking the concrete surface, scaffolding where nacessary, curring etc., all complete as ter drawing, specifications and as directed by the Engineer in Charge.

Demolishing/ Dismanlting Brick work manualy including removing and disposing the dismantled material to dumping yard in colony with all leads and lifts, scaffolding as and when required and stacking of serviceable materials etc., all complete as per specification and as directed by the Engineer in Charge.

Providing and laying Flyash lime brick masonry of class 10 designation in CM 1:6 (1 cement : 6 coarse sand) in foundation and plinth, including curing, provision of scaffolding etc., all complete as per specifications and as directed by the Engineer in Charge.

Prpviding gola75x75 mm over chajja in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down guage),in 75x75 mm deep chase , including finishing with cement mortar 1:3 (1 cement : 3 fine sand) , including providing and mixing approved water proof compound in the proportion recommanded by the manufacturer , hacking of concrete surfaces , scaffolding where necessary , curing etc., all complete as per standard design, specification and as directed by Engineer in Charge.

Providing and laying plain cement concrete of 1:2:4 (1 Cement : 2 Coarse sand : 4 graded crushed stone aggregate) using 20 mm and down graded crushed stone aggregate of approved quality including shuttering, levelling , ramming, finishing and curing etc.,all complete as per specifdication and as directed by Engineering in Charge.

Removing the GS/ AC/ NonAC/ FRP sheets at all heights (up to 30 M) i.e. from roofing/ cladding etc., and stacking the serviceable materials & handing over the same to the sectional stores, disposal of debris to the dumping yard etc., all complete as per specifications and as directed by the Engineer in Charge.

Providing and fixing precoated galvanised iron profile sheets at all heights (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling / self tapping screws of size (5.5x 55 mm) with EPDM seal, or fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers along with wind ties complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required etc., all complete as directed by the Engineer in Charge.

Providing and fixing precoated galvanised steel plain Ridges (500 - 600mm) of roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws etc., all complete as directed by the Engineer in Charge.

Providing and fixing in position Fly proof Stainless steel grade 304, wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50mm to the existing windows and other areas in place of damaged fly proof mesh by using existing beeding/ existing steel frame including nuts and bolts, removing of old damaged mesh and hand over to sectional stores etc. all complete as per specification and as directed by the Engineer.

Providing and laying vitrified floor tiles of size 600x600 mm of approved shade and make (viz. Jhonson, Bell, Somany or equivalent which should be approved by department) (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622 with ISI Mark, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand ), jointing with grey cement slurry @ 3.3kg/ sqm including grouting the joints with white cement and matching pigments etc., including preparation of old flooring surface by manual/ mechanical means by hacking, chipping, dismantling if required, pitting, grinding as directed, including removal of doors, trimming of bottom as required and re fixing the same in position wherever required due to raise in floor level, cleaning etc., as per site conditions, all complete as per specifications and as directed by the Engineer in Charge.

Providing and laying vitrified floor tiles in skirting of size 600x600 mm of approved shade and make (Jhonson/ Bell/ Somany or equivalant which should be approved by department) (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622 with ISI Mark, in all colours and shades in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1: 3(1 cement : 3coarse sand), grouting the joints jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement & matching pigments etc. complete with white cement and matching pigments etc. in old quarters as per site conditions, including preparation of old surface by manual/ mechanical means by hacking, pitting, grinding as directed etc. all complete as per specifications and as directed by the Engineer in Charge.

Providing and fixing flat back wash basin of size 550 x 400mm with C.I. brackets, 15 mm C.P. brass pillar tap including painting of fittings and brackets, cutting and making good the walls wherever require, including removing of the old wash basin and fittings, providing and fixing 32mm dia heavy duty full threaded waste coupling, 32mm dia good quality PVC waste pipe, 15mm dia good quality connecting pipe with C.P. brass nuts, handing over the old removed fittings to the sectional stores and disposal of debris to the dumping yard etc., all complete as per specifications and as directed by the Engineer in Charge.

Providing and fixing Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868 of approved brand ,Minimum anodic coating of grade AC 15) work for doors, windows and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, including providing & fixing hinges/ pivots and making provision for fixing of fittings wherever required, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws etc., all complete as per architectural drawings and the directions of Engineer in charge. (Glazing/ panelling to be paid for separately) Note : Repair works shall be guaranteed for one year for smooth operation.

Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc , including stacking and handing over to the sectional stores ,including finishing the dismantled areas neatly to true line and level complete as per specifications and as directed by the Engineer in Charge.

Of area 3 sq. metres and below

Of area beyond 3 sq. Metres

Providing and fixing float glass panes of 5 mm thickness in glazing for aluminium doors, windows, ventilator shutters etc., with PVC/neoprene gasket etc., complete as per architectural drawings and as directed by the Engineer in charge.

Providing and fixing 100mm brass mortice latch and lock with 6 levers without pair of handles of Godrej or approved make for aluminum doors including necessary cutting and making good etc. complete as per specifications and as directed by the Engineer in charge..

Providing and fixing EPDM rubber/ neoprene gasket to the aluminium doors/ windows/ ventilators, including removing shutters and glass carefully and refixing the same with new EPDM rubber gasket, provision of scaffolding where ever required and also use aluminium snap beading where ever required etc., all complete as per specification and as directed by Engineer in Charge. Note : Aluminium snap beading if any will be paid in item no. 15

Supplying, fabricating and fixing of structural steel work riveted, bolted or welded in builtup sections, trusses and frame work including cutting, welding, hosting, fixing in position and applying two coats of enamel painting of approved make viz. Asian/ Nerolac/ Berger over a priming coat of steel primer of approved make etc., all complete as per drawings, specification and as directed by the Engineer-in-charge. (Fabrication with MS plates, angles, Flats, channels, Tubular sections, square bars etc.,)