DAY TO DAY MAINT SERVICES IN SOUTH SIDE OF RUNWAY IN TECH AREA AT AF STN JODHPUR

Amount

Attending day to day complaint for petty repair to easing of Door/window/cup board shutters by tightening of hinges/handles/Al-drop bolts/tower bolts/knobs/hasp and staples etc of any size /any number of panels for easy closing/opening or changing the position of hinges, adjustments of tower bolts, sliding bolts, replacement of looking mirror etc complete including replacement of major defective items if required, complete all as specified and directed.

Attending day to day complaint for petty repair to leakage of water in bib tap/pillar tap/stop cock/angle valve, flusing cistern, WHB, Sink, wall mixer, etc of any description any size by changing the washer/jumper etc by adjusting/replacing the washer and adjustment of lever required for making the flushing cistern functional, by tighting the waste pipe of WHB /Sink and providing 'M' seal to stop leakage as required. Removal of air lock/blockage of water in GI tubing and cleaning the pipe or fittings etc including replacement of major defective items if required, complete all as specified and directed. Note for Item No. 1&2 (a) The contractor shall make all arrangements for attending the different types of complaints on every day basis.Any major items required to be replaced with new one to make the system functional shall be measured and paid for separately as "S &F" under respective applicable item of this schedule. Old retrived items as considered in 'Schedule of Credit' shall become the property of the contractor. (b) Contractor shall provide minimum one carpenter and one plumber including all necessary T & P on every alternate days from 9 AM to 5 PM. Additional workers can be engaged if nature of work required to be completed with in fix time as desired by EIC. Rate quoted shall be deemed to inclusive accordingly. (c) Where material provided shall be paid as "S & F" under respective item of Sch 'A' the payment of complaint under this item shall not be paid.

Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc, of capacity exc 250 Ltrs but not exc 500 Ltrs and marking the date of cleaning with stencil/computerized letter, the height of the letter shall not less than 10 cm complete all as specified and as directed.

All as per Item No 3 above but capacity of tank exc 500 Ltrs and not exc 1000 Ltrs complete all as specified and as directed.

Demolition of cement concrete in ground floors and pavings not exc 15 cm thickness ( below or above ground level ) and disposing of debries outside MD land complete all as specified and as directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Dismantling of Stone slabs & tiles of any description or thickness in floors, aprons etc. Laid, bedded & pointed in any mortar complete all as specified and directed.

Taking down chowkats or frames with shutter (without taking off shutters from the frame) not exceeding 1.5 Sqm each complete all as specified and as directed.

Taking down chowkats or frames with shutter (without taking off shutters from the frame) exceeding 1.5 Sqm not exc.4 sqm each complete all as specified and as directed.

Resecuring or easing and adjusting without taking down of shutter of any description area exc 1 sqm complete all as specified and directed.

Taking down shutters of any description area exceeding 1 sqm complete all as specified and as directed.

Taking down cement plaster on block masonary or concrete surfaces including raking out joints,hacking for key,scrubbing down with water etc. all as specified and as directed.

S&F for Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)

S&F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grained PVC sheet & edges will be painted to match with printed sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F for Factory made solid panel PVC door shutter, 30 mm thick (Style) consisting of frame made out of M.S. tubes for top and bottom rails, M.S. frame shall be covered with heat moulded wood grain printed PVC sheet used instead of Plain colour PVC sheet & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900) used instead of exposed portion of PVC sheet beading and joined together with solvent cement and fixing in the frame at site all as per specification & drawing all as specified and as directed.

S&F for Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm hick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm prelam PVC Sheet on back faces complete all as per specification & drawing.

M & L for 30 mm thick flush shutter solid core construction with block board core and plywood face panels, one face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed.

S & F in repair 150 mm floor door stopper of aluminium alloy powder coated, with hard drawn steel spring all as specified and as directed.

S&F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm with stainless steel wire staples complete all as specified

S&F in repairs cast iron body Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width & of weight between 61 to 80kg.complete all as specified and directed.

S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed.

Supply and fix in repairs 20 mm dia with 1 mm wall thickness drapery rod in any length, high strength stainless steel pipe including bracket/finials complete all as specified and as directed.

S&F for butt hinges medium weight cold rolled mild steel of size 100 mm complete all as specified and directed.

S&F for Aluminium anodised barrel tower bolt, of extuded section and fixed of 150 mm long complete all as specified and directed.

S&F for 300 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F extruded aluminium alloy handles fabricated type, anodised 150 mm long all as specified and directed .

S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks & similar work conforming to Fe 290-0 Gde E-165 including dismanting complete all as specified and as directed.

S&F for 1.00 mm Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and as directed.

S&F in repairs CP Bib taps fancy type 15 mm bore, cast copper alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs CP Pillar taps fancy type 15 mm bore, cast copper alloy, with capstan heads screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks & fly-nuts, screwed for iron pipe complete all as specified and directed.

S&F in repairs Vitreous China wash basin, white, flat back. Size 550 x 400 mm excluding taps, waste chain & plug & porcelain stopper but including brackets complete all as specified and as directed.

S&F in repair for sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers & waste; including bedding in CM to dwarf wall or including fixing cantilever brackets & connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed

S&F in repair Stop valves/angle valve 15 mm bore fancy type, CP, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repairs PVC valveless, syphonic action type, flushing cistern 10 litr capacity, low level, white, with intel, ball valve, float & handle including brackets complete all as specified and directed.

S&F in repair for mirror of 5 mm thick glass with double coat of protection and longevity grounded edges for safety and silver plating on the back for better reflection including with stainless steel decorative fastener complete all as specified and directed.

S&F in repair for 15 mm bore Bib tap standard of PTMT any colour fancy typehigh pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm?125gm complete all as specified and directed.

S & F 20 mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe including taking down old ball valve complete all as specified and as directed [Minimum weight for 20 mm – 210 gms] complete all as specified and directed.

S & F in repair PVC connection 15 mm size with PTMT nuts of length 450 mm, including taking down old PVC connection all as specified and as directed.

S&F in repair for PVC water closet seat cover, black or white, closed pattern, with flat bottom and cover and mild steel chromium plated or aluminised hinging device, all as specified and as directed.

S&F in repair for health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 meter lomg flexible tube and ABS wall hook including making connection and fixed in position complete in all respect as specified and directed.

S&F in repair CP grating of size 100 mm dia with/without waste hole complete all as specified and directed.

M & L for 15 mm GI tubing medium grade with all fittings fixed to walls, ceiling or laid in floors including taking up or down existing unserviceable steel tubing and connections complete all as specified and as directed.

M & L for 20 mm GI tubing medium grade with all fittings fixed to walls, ceiling or laid in floors including taking up or down existing unserviceable steel tubing and connections complete all as specified and as directed.

M&L in repairs 32mm dia, 800mm long flexible PVC waste pipe complete all as specified and as directed.

S & F for polyethylene water tank cover with hinges suitable up to 1000 Ltrs tanks, including taking down old water tank cover all as specified and as directed.

S&F for rotational moulded polyethylene water storage tanks of 500 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position including 20mm dia HD polythene float (ball) and epoxy coated aluminium rod (fly nut) screwed for iron pipe or brass ferrule including taking down old one all as specified and as directed.complete all as specifed and directed.

All as per item No 47 above above but 1000 Ltrs capacity.

S & F in repairs kitchen plate rack with four shelves made out of stainless steel sheet 1mm thick over all size 90x60x25cm complete all as specified

S & F in repair for 75 mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including taking down old pipes all as specified and as directed.

All as per item No. 50 above but 110 mm dia .

S & F PVC (SWR) bends any radius 75 mm dia, , in repairs all as specified and as directed

S & F PVC (SWR) bends any radius 110 mm dia of bore, including taking down old bends all as specified and as directed.

S&F in repair for 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed

All as per item No. 54 above but 110 mm dia .

Supplying and fixing of CPVC pipes 16 mm dia (outer dia) SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down complete all as specified and directed.

S&F in repair for Brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding flushing cistern and flush pipe) white including necessay fitting etc complete all as specified and as directed.

S&F in repairs Vitreous China squatting pan of orissa pattern size 580mmx440 mm white with `p' or `S' trap, front or back inlet & integrated foot rests, including provision of cement concrete bedding complete all as specified and as directed.

Supply and fix in repair Vitreous china urinal, half stall type, white, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60cm long brass screws, pointing around urinal back in cement, with grating and union for discharge pipe and PVC waste pipe, including making all connections to existing connections, fixed complete all as specified and as directed.

S&F in repair for brass chromium plated urinal spreader fancy type of approved quality fixing with 15 mm dia pipe complete all as specified and directed.

S&F Aluminium Anodized aluminium frame for doors, windows, ventilators, partition wall with one or more rebates including handle, tower bolt, hinges etc including taking down old doors/windows/partition complete all as specified and as directed by Engr-in-Charge.

Add for Powder Coating to Aluminium Anodized aluminium frame for doors, windows, ventilators, partition wall (minimum thickness of powder coating 50 micron) complete all as specified and directed

M&L for 12 mm thick perforated particle board/tiles for insulation and accoustic purpose 60x60 cm in size fixed with staples on snap grid including preparation of surface and applying two coats of oil bound distemper on new or previously untreated surfaces of ceiling in patch work including taking down of old boards complete all as specified and directed.

S & F for 5.5 mm thick sheet glass ordinary quality in square exc 0.50 Sqm each in each pane, fixing with necessary rubber beading etc complete all as specified and as directed.

S&F for 12 mm thick Prelaminated particle board, interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws, necessay beading etc to timber/aluminium frame work complete all as specified and directed.

Hacking out old broken glass of any thickness, size, quality or description from metal frame including punching or drilling out old glazing pins/spring clips etc complete all as specified and as directed.

S & F for 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in each pane all as specified and as directed.

M&L for 2.0 mm thick PVC tiles/ sheets, laminated plain coloured, homogeneous finish, laid with approved rubber based adhesive in floors including removing of old sheets complete all as specified and directed.

S&F in repairs 5 mm thick PVC acrylic sheet in square or rectangle in each pane fix in window/ventilator by fixed with necessary joining cleats glazing clips, rubber packing, aluminium snap beading, screws etc complete all as specified and as directed.

S&F for 12 mm thickToughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required including all stainless steel (Grade 304) patch fittings including handles fittings etc complete all as specified and directed.

M&L for 25 mm thick PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in sub floors complete all as specified and as directed.

M & L for renewing tiles in patches area n.exc 5.00 Sqm including removing and cleaning old tiles, preparing beds and laying or setting, jointing and pointing new ceramic tiles to match the existing floor/wall complete all as specified and as directed.

M&L for glazed ceramic coloured tiles of size 350 x 250 x 8-10mm/450 x 300 x 8-10mm/300x600x 8-10 mm thick laid over and ncluding 10 mm thick rendering in cement mortar 1:4 as in backing coat for tiles on vertical surfaces,set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specifed and directed.

S&F coloured Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM(1:6) complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar 1:4 or fair faces of brick or cement concrete, surfaces finished even and smooth without using extra cement complete all as specifed and as directed.

M&L for Precast cement concrete 1:3:6 type C1 (Using 20 mm graded stone aggregate) block masonry with solid blocks, exceeding 10 cm in width and setting in cement mortar 1:6 complete all as specified including demolition complete all as directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including screed bed of 15 mm thick in CM 1:4 complete all as specified and as directed.

M&L for Kota stone slab 20-25mm thick as in riser of steps, skirting, dado and pillar laid over cement screed and jointed including 10 mm thick rendering in cement mortar 1:4 as in backing coat complete all as specified and directed.

M&L for Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish including joint filling with white cement complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10cm in width or girth not otherwise discribed, and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L for preparation of new plastered surfaces of walls and applying two coat of oil bound distemper over a coat of alkali resistant primer complete all as specified and as directed.

Dismantling of Plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S&F for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for providing and laying at ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

M&L for 75 mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregates ) as in sub base complete all as specified and as directed.

M&L for providing and laying 80mm thick factory made chamfered edge cement concrete paver block with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern, laid over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed.

M&L for 40 mm thick PCC 1:2:4 type B1 using 20 mm graded stone aggregates as in floor, hardstanding sutface finished even and fair complete all as specified and directed.

S&F in repair for Venetian blinds, vertical/horizontal type, 100 mm wide with polyester fabric of approved colour and pattern with aluminum fittings, and top rail and nylon buttons / loops etc., fixed cuttings and alteration if necessary wherever AC / coolers exists including dismantling of old unserviceable venetian blinds, complete all as specified and as directed.

S& F for Solid PVC Wall Lining consisting of 5mm thick single side prelaminated PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and ditected.

S&F for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and ditected.

M&L for 35 to 40 mm thick precast RCC Jallies of pattern as approved including frame , balusters, bressumers, kneelers, string courses fixing in any position with CM 1:4 including demolition of old jallies and thrown outside MD land complete all as specified and directed.

M&L for preparation of old surfaces of wall, and applying white cement base putty in patches as required and applying two coat of oil bound distemper complete all as specified and directed.

Demoiltion/breaking to Old PCC of any type (unreinforced or reinforced)/demolished materials and removing the same to outside MD land including making good the existing surface at a true level complete all as specified and directed Note :- (i) Place/spot outside MD land for depositing demolished/excavated building material shall be ascertained by the contractor at their own cost (ii) The material shall be paid through stack measurement and voids will be deducted as in Engineering practice.

M&L Granite of 18 to 20mm thick, work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and laid over and including screed layer of 15 mm thick in CM 1:4 complete all as specified and as directed.

VIKAS CONSTRUCTION CO.

AAI NATH ENTERPRISES

RUPESH CONSTRUCTION CO

Savitri Enterprises