WORK PLAN YEAR 2025-26

No. y figures

hard murrum excavated from approved borrow

area/village tanks etc.including breaking clods, dressing 108.00 CM 84.20

to the design section with lead up to 500 meter and all

lifts.(By JCB-4CX machinery)

Excavation for foundation in all sort of soil including

yellow, sandy, gravelly soil, soft & hard murrum etc.

dry condition including depositing the excavated stuff

in uniform layers in banks or as directed for lead up to

1.00Km. and all lifts. (By machinery) (a) Above water

Excavation for foundation in soft rock including

deposing the excavated stuff as and where directed etc.

complete for lead up to 1.00Km. And all lifts. (By

machinery) (a) Above water table.

Excavation for foundation in hard rock including

blasting and chiselingbn if necessary sorting out and

staking seperatly the usable ruble, depositing the

4 excavted stuff as and where directed including back 129.00 CM 330.50

filling the tranches with suitable excavated stuff

etc.completefor lead upto 1.50 mt. and All lift . (A)

Abow water table (By Machinary)

Drilling holes of 35mm dia vertical/inclined in all

formation of rock / concrete up to required depth

5 including washing with air and water at required 323.00 RMT 2321.70

pressure for following stage of depth. (a) For 0.00 m to

10.00 meter depth.

Providing and placing in position reinforcement bars

including welding, joints where necessary hooking

etc.complete as per drawing for all lead and lifts(B)

Providing and laying Plain/Reinforced cement concrete

of cement ,sand and metal (20mm to 25mm) size) in

7 following proportion laid in situ including centering and 969.26 CM 4943.90

shuttering , temping,smooth finishing,curing etc.

complete as directed for for all lead and lifts.(iv) 1:2:4

Providing and laying 75mm wearing coat of in ordinary

potland cement concrete M-15 grade including laying

on proper camber, tamping, screening, finishing,

broomung or grooving etc. complete for all lead and lift.

Providing and fixing M.S. Steel gate of required size

including all necessary accessories as per approved

design and plan with cost of two coat oil paint and

single coat of anticorrosive oil paints etc. complete.

Providing and laying dry rubble pitching of 300mm

thickness to required grade including trimming of

10 earthwork hand packing the interstices with spauls, 70.60 SM 455.50

filling earth in interstices paneling complete for all

leads and lifts.

Providing and Fixing in position110 mm diameter PVC

11 pipe weep hole in abutment ,wing wall, and laying 53.00 RMT 263.70

training etc. complete.

Providing and fixing marble plate of 2.cm thickness

12 including engraving and filling paint for letters as 13.50 250.60

Providing & fixing in position sign board of standard

size of 1.20mx0.90m with M.S. angle

40mmx40mmx6mm with 3mm thick iron plate

including fixing in 1:5:10 prop. Concrete block size

40cmx40cmx75cm including painting existing data on

the board etc. complete as directed.

Eighty one lakh forty thousand four hundred fifty nine rupees and fifty two paisa only.

I/We am/are willing to carry out the work at _______ % above/below ( percent

should be written in figures and in words ) of the estimated rates mentioned above.

Amount of my/our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

Signature of contractor Executive Engineer

Panchayat Irrigation Division

Tapi-Vyara