PROVISION OF SINGLE LIVING ACCN FOR 06 OFFRS AT JOSHIMATH

Amount

Total amount of SCHEDULE 'A' PART-I (BUILDING WORK) (For details see Schedule 'A' Part-I in PDF folder)

Total amount of SCHEDULE 'A' PART-II (INTERNAL WATER SUPPLY) (For details see Schedule 'A' Part-II in PDF folder)

SCHEDULE 'A' PART-II-B (INTERNAL WATER SUPPLY)

S&F chromium plated over head shower square shape single flow with rubit cleaning system complete all as specified & directed. (Make- Jaquar Cat Part-OHS-CHR 35495/Kohler Cat Part K-22645 in CP/Hindware Cat Part-F160019(CP)

S&F 15mm bore wash hand basin brass chromium plated mixer fancy type for mixing hot & cold water, screwed for iron pipe and fixed complete all as specified & directed. (Make- Jaquar Cat Part-ARI-CHR 390018/Kohler Cat Part-74013IN-4ND-CP/Hindware Cat Part-750011CP)

S&F Health faucet brass chromium plated fancy type complete all as specified & directed. (Make- Jaquar Cat Part-ALD-CHR-573/Kohler Cat Part-98100IN-O/Hindware Cat Part-F160002CP)

Total amount of SCHEDULE 'A' PART-III-A (INTERNAL ELECTRIFICATION) (For details see of Schedule 'A' Part-III-A in PDF folder)

SCHEDULE 'A' PART-III-B (INTERNAL ELECTRIFICATION)

M&L for point wiring (concealed) complete using approved colour coding as per IS (Red, Black, Green for single phase circuit) with multi-stranded copper conductor 1.5 Sqmm nominal cross section area, single core PVC insulated unsheathed FRLS cable 1100 volts grade, ISI-694 marked with valid CML No. in and including PVC conduit medium grade conduit accessories such as bend, tee, junction boxes elbows etc, ISI marked with valid CML No. (IS :9537 -1983 for conduit and IS :9537 -1976 for conduit accessories) including pressed steel terminal sunken boxes 1.6 mm thickness, 65mm deep with earth dolly, duly painted with two coats of black bitumenous paint over a coat of red oxide primer externally, covered with 3mm thick plastic laminated sheet ISI marked top cover fixed with brass screws, cup washers and PVC unsheathed copper conductor 1.5 Sqmm cross sectional area, single core FRLS cable as earth continuity wire connected to DBs/sunken boxes/fittings conductor and all other metal parts with earth dolly complete all as specified and directed for the following:-

One Light point controlled by one switch 5/6 Amp

One fan/exhaust fan point controlled by one switch 5/6 Amp.

One bell/buzzer point controlled by one switch 5/6 Amp.

One light point controlled by two Nos two way switches 5/6 Amp

One 5/6 Amp socket point controlled by one switch on the same board.

One 5/6 Amp socket point controlled by one switch independent board.

M&L for point wiring (concealed) complete using approved colour coding as per IS (Red, Black, Green for single phase circuit) with multi-stranded copper conductor 2.5 Sqmm nominal cross section area, single core PVC insulated unsheathed FRLS cable 1100 volts grade, ISI-694 marked with valid CML No. in and including PVC conduit medium grade conduit accessories such as bend, tee, junction boxes elbows etc, ISI marked with valid CML No. (IS :9537 -1983 for conduit and IS :9537 -1976 for conduit accessories) including pressed steel terminal sunken boxes 1.6 mm thickness, 65mm deep with earth dolly, duly painted with two coats of black bitumenous paint over a coat of red oxide primer externally, covered with 3mm thick plastic laminated sheet ISI marked top cover fixed with brass screws, cup washers and PVC unsheathed copper conductor 2.5 Sqmm cross sectional area, single core FRLS cable as earth continuity wire connected to DBs/sunken boxes/fittings conductor and all other metal parts with earth dolly for one three pin 15/16 Amp, socket outlet point on independent board complete all as specified and directed.

S&F LED lamp 10 watt suitable for lamp holder complete all as specified and directed.

M&L for distribution board (DB) made out of sheet metal enclosure (CRCA sheet) dust and vermin proof 12 way with 200 Amps rated copper bus bar neutral bar ,earth bar, single pole and neutral 240 volts, double door, flush to wall and connecting with cable complete all as specified and directed.

M&L for Distribution board (DB) sheet metal enclosure factory made conforming to IS: 13032, IP-42 protection, fabricated of CRCA sheet sheet not less than 1.2 mm thick fitted with DIN channel, neutral link, powder coated paint dust and vermin proof, SPN 2 way without bus bar, 240 volts, single door, flush to wall connection with cable, complete all as specified and directed.

M&L for Distribution board (DB) sheet metal enclosure factory made conforming to IS: 13032, IP-42 protection, fabricated of CRCA sheet sheet not less than 1.2 mm thick fitted with DIN channel, neutral link, powder coated paint dust and vermin proof, single pole neutral 6 way with 200 Amps rated copper bus bar neutral bar,earth bar, 240 volts, single door, flush to wall connection with cable, complete all as specified and directed.

Supply and fixing Vertical load line type TPN DB, 4 way, as per IS - 8623, IP-43 protection, universal mounting with suitable capacity copper bus bar with nuetral bus bar, earth bar and cable ties for cable management, top and bottom removable gland plate suitable for MCB TPN 63 Amps as incomer and MCB SPN/SP 6 to 32 Amps as outgoing and outgoing cables, with copper lugs, crimpped with crimping tool complete all as specified and directed.

S&F MCB, single pole & neutral, 240 volts, 6 to 32 Amps current rating, breaking capacity 10 KA complete all as specified and directed.

S&F MCB, triple pole & neutral, 415 volts, 63 Amps current rating, breaking capacity 10 KA complete all as specified and directed.

S&F MCB 5/6 to 32 Amps, single pole, 240 volts, breaking capacity 10 KA with 'B' characteristic complete all as specified and directed.

Sub main wiring with 2 run single core 2.5 Sqmm, PVC insulated PVC unsheathed stranded copper conductor cable in and including PVC concealed/surface conduit, 25 mm or higher dia. ISI marked, medium grade complete with all conduit accessories/ fittings including extension earth wire with 1 run of 2.5 Sqmm single core PVC insulated, unsheathed copper cable fixed along with sub main in PVC conduit and connecting to earth dolly with all fixing material complete all as specified and directed. (Note :- Three run of copper cable measured as one unit).

Sub main wiring with 2 run of single core 6 Sqmm, PVC insulated PVC unsheathed stranded copper conductor cable in and including PVC concealed/surface conduit, 25 mm or higher dia. ISI marked, medium grade complete with all conduit accessories/ fittings including extension earth wire with 1 run of 6 Sqmm single core PVC insulated, unsheathed copper cable fixed along with sub main in PVC conduit and connecting to earth dolly with all fixing material complete all as specified and directed. (Note :- Three run of 6 sqmm copper cable measured as one unit).

S&F LED linear mirror light aesthetically designed, provided with a high output PMMA diffuser for glare free light 10 watt, dimension 300 mm including lamp etc complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. Make- Crompton Cat Part No.LLL-10CDL/Wipro Cat Part No.Wipro Magma LED 10 Watt/Havells Cat Part No.ENDURALINEARNEOBS10WLED865SPCWH

S&F LED surface and wall mounted fitting LED batten, extryded aluminium housing provided for dissipation with polycorbonate diffuser and integrated electronic driver with industrial grade heavy duty having THD<10% suitable for 20 watt including tube rod light (double side connection) ultra glass LED tube light with high efficiency suitable for installation T8 fitting with G13 lamp holder, high lumen output PF>0.98, neutral white 20 watt 4 ft long light fitting with lamp etc complete with all light accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. Make- Crompton Cat Part No.LCTL-18CDL + LLT8-20/ C&S Cat Part No.TATRA-Ei/20W/Havells Cat Part No.ENDURALINEARNEOBS20WLED865SPCWH + CRYSTAL 1213TBDSTL20WLED865SGLASS

S&F LED surface/wall mounted/hanging type and high transmissibility diffuser , high lumen output PF>0.98, THD<10%, neutral white 20 watt fancy type light fitting with lamp etc complete with all light accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. Make- Philips Cat Part No.1738130PN+B22 LED Bulb20 Watt or equivalent in Bajaj/Crompton/Wipro/Surya

S&F blanking plate complete all as specified and directed.

Supply, fixing, connecting and testing building security light fitting LED 45 watt with pressure die cast aluminium housing heat resistant toughened glass, IP-66 protection and impact resistance of IK07 with 10 KV buit in surge protection device, better optics for uniform distribution complete with electronic driver etc, including connecting up with three core copper conductor cable with 1.5 Sqmm size copper wire from ceiling rose to connector of light fitting complete all as specified and directed. Make- Crompton Cat Part No.LSTP-45CDL/ C&S Cat Part No.LTESSI45WLED/LS/ Havells Cat Part No.ENDURAPEARLNEOOSL45WLED757PASYTOPC

M&L for fabrication of GI pipe, light grade, bracket of size 40 mm dia and 1.50 m long fixed to wall with and including nut, bolts and GI clamps of size 50 x 5 mm as required including two coats of synthetic enameled paint over a coat of primer, complete all as specified and directed.

S&F Exhaust fan 300 mm sweep, energy saving 3 star, 230 volts, single phase, metalic body with louver shutter, bracket etc complete, including cutting the round hole of required size in wall finishing the same supply and grouting the ragged bolts in wall, fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated three core 23/0.0076 copper cable, rubber insulated from ceiling rose to exhaust fan motor and writing MES No with black synthetic enamel paint 2.0 cm high complete all as specified and directed. Make- Crompton Model-TRANS AIR/Bajaj Model-70046(MAXX AIR)/Havells Model-Turbo Force SP

S&F rigid non metalic PVC junction/terminal boxes (1 - 4 ways) suitable for 25 mm dia conduit pipe, ISI marked complete as specified & directed.

S&F rigid non metalic PVC conduit 25 mm dia, medium grade, concealed with conduit accessories such as bend, tee, elbow, couplers etc but exclusive of junction/terminal boxes, ISI marked, complete as specified & directed.

S&F 4 mm dia GI wire earth continuity conductor on main earthing lead fixed to pole or burried in ground or any other situation for loop earthing extra as required complete as specified & directed.

M&L for Earthing with galvanized mild steel earth plate (electrode) 600 x600x6.00mm thick, burried directly in ground earth pit not less than 2.25 mtr deep below ground level surrounded with adequate quantity of charcoal dust mixed with common salt to a packed thickness of 15 cm all round the plate, using 4 mm dia GI wire as earth wire moulded and riveted to earth plate at one end and connected to main switch/control switch of the building at another end, GI earth wire incased in and including 15 mm dia GI "light grade' pipe from upper end of earth plate upto main switch/control of the building including 20 mm dia gi pipe light grade as water pipe from earth chamber to upper edge of earth plate, CI funnel with wire mesh fixed on water pipe and provision of PCC chamber and RCC pit cover with lifting handle, excavation earthwork including laying of GI pipe concealed in floor/ walls all as described in electrical plate No 5 of SSR Part-I complete all as specified and directed. (Note:- The unit quoted rate deemed to be included for protection pipe and GI earth wire 4 mm dia from top of earth plate to 7.5 mtr above ground level).

S&F PVC heavy duty structure type cable trancking of size 50x50 mm suitable for carrying telephone wire / cable TV wire/ or any other communication wire / cable as per requirement basis at site, complete all as specified and directed

S&F Modular metal box 1/2 module, ISI marked complete as specified & directed.

S&F telephone socket -1M , including front plate and cover plate complete as specified & directed.

S&F TV socket -1M , including front plate and cover plate complete as specified & directed.

S&F double stiff pendants, comprising of galvanized steel or chromium plated brass bell mouth connectors 02 Nos with back plate and 2 x 1.50 metre long parallel 20 mm bore galvanized or stove enameled screwed steel conduit with check nuts for fixing tube light fitting and upto 1.50 metre twin core 0.5 Sqmm copper conductor flexible wire/cable as required at site complete as specified & directed.

S&F direct connected single phase two wire temper proof electronic energy meter 10 - 40 Amps, 240 volts, 50 Hz, accuracy 1.0 class, load survay more than 150 days upto 5 parameters having digital display with SMC Meter box at least 02 Nos seal, operating at (-) 25 to (+) 70 degree centigrade with all connected accessories complete all as specified and directed

Supply, Installation, testing and commissioning of electric water heater storage type, capacity 25 Ltrs, 5 star rating, suitable for single phase, 50 Hz, AC supply, stainless steel inner assembly, 1.5/2.0 KW heating element, twin thermostat for water temperature and safety thermostat stove enameled outer body including minimum 1.0 metre 2.5 Sqmm twisted copper conductor cable PVC sheathed, three pin plug top, 02 Nos PVC connection pipe 450 mm long with chromium plated adapters at ends suitable for HOT & COLD water, at hot water outlet with safety fusible plug conforming to relevant IS, including necessary fixing fasteners etc. complete all as specified and directed.

Total amount of Sch 'A' Sec - IV (SITE CLEARANCE AND EARTHWORK) (For details see Schedule 'A' Part-IV in PDF folder)

Total amount of SCHEDULE 'A' PART-V (RETAINING WALL/PROTECTIVE WORK) (For details see Schedule 'A' Part-V in PDF folder)

Total amount of SCHEDULE 'A' PART-VI (ROAD, PATH, CULVERT & HARD-STANDING) (For details see Schedule 'A' Part-VI in PDF folder)

Total amount of SCHEDULE 'A' PART-VII (SEWAGE DISPOSAL) (For details see Schedule 'A' Part-VII in PDF folder)

Total amount of SCHEDULE 'A' PART-VIII (AREA DRAINAGE) (For details see Schedule 'A' Part-VIII in PDF folder)

Total amount of SCHEDULE 'A' PART-IXA (EXTERNAL ELECTRIFICATION) (For details see Schedule 'A' Part-IXA in PDF folder)

SCHEDULE 'A' PART-IXB (EXTERNAL ELECTRIFICATION)

Supply, Installation, commissioning and testing of transformer copper wound step down 63 KVA out door type11/0.433 KV at no load 3 phase, 4 wire, 50 HZ AC with oil immersed air naturally cooled (ONAN type), with external cooling tubes / radiatiors, double wound core type copper wound having no load voltage ratio 11 KV / 415 volts corresponding to principal tapping delta connected primary side (HV Side) and star connected on secondary side (LV side) in accordance with vector symbol DYN 11 (Vector group - 4) with neutral brought out on LV side and having tapping on HV side for constant out put so as to altervary secondary voltage from (+) or (-) 2.5 %, (+) or (-) 5% and (+) or (-) 7 .5 % in step to be changed by mean of manual OFF LOAD tap changing arrangements, maximum temperature rise should not exceed 45 degree C in oil and 50 degree C in HV/LV winding when measured by resistance method after continuous full load run in ambient temperature, transformer shall be conforming to IS-1180 Pt-I 2014 complete all as specified. The transformer shall be complete with following fittings and accessories :-

(a) Oil conservator tank with filling hole and cap drain and oil level guage. (b) Silica gel breather with oil seal and first fill of dehydrating agent. © Pressure relief valve with automatic resetting arrangement after release of pressure – 01 Set. (d)Oil temperature gauge having range 0-1200 C with max reading 100mm dia with shut off valve between the conservator and main tank. (e) Double float Buchholz relay with alarm and trip contacts with one No. of shut off valve. (f) Adequate No. of thermometer pocket including one number for accommodating bulb type thermometer. (g) Drain cum bottom valve. (h) Top filter valve. (j) prismatic oil level gauge (k) Inspection cover. (l) Cover lifting lugs (m) Jacking and lifting lugs (n) Rating and diagram plate (o) Separate neutral bushing brought out for earthing on LV side. (p) First filling transformer oil conforming to IS: 335-1972 and tested upto 60 KV dielectric strength (q) Earthing terminals -02 Nos located on diagonally opposite transformer tank (Note:- Transformer shall be mounted on two pole structure and pole structure will be measured separately under respective items)

(a) INCOMING:- MCCB 160 Amp 4 pole, 415 Volts, thermal magnetic and micro processor based release fixed for overload, short circuit and earth fault protection with service breaking capacity 36 KA(Ics=100% Icu) - 01 No.(Main incoming) (b) ACCESSORIES :- (i) Aluminium Bus bar 300 Amp capacity for phases- 03 Nos and 250 Amp for neutral - 01 No. (ii) Digital multi function panel mounted meter for energy metering, monitoring and management system suitable for LT 3 phase 4 wire applications, using micro controllers and non voltage memory and providing anti tamper features and communication facility at high accuracy with accuracy for active energy as per IS:13779-99/IEC 61036, CL 1.0, operating temperature - 10 to +55 degree C, relative humidity 95% non condensing, 96x96x86 mm or nearer size, 3 line backlit display of 6 digit each to display voltage , current active power, reactive power, apparent power, power factor frequency and other parameters, digit height 8x4.8 mm, protection index IP-54 with all necessary CTs & PTs and instrument fuses, wiring complete - 01 Set (iii) Panel indicator lamp for three phase R, Y & B for each incoming and outgoing feeder - 01 Set (iv) Complete control panel internal wiring including making connection all incoming and out going MCB/MCCBs with suitable size of stranded copper conductor -01 job

(c) OUTGOING:- (i) MCB SPN, rupturing capacity 10 KA, 32 Amp - 01 Nos (for street light) (ii) MCCB 63 Amp 4 pole, 415 Volts,50 Hz, thermal magnetic and micro processor based release fixed for overload, short circuit and earth fault protection with service breaking capacity 16 KA(Ics=100% Icu) - 02 Nos (outgoing) and 01 Nos Spare (iii) Timer switches 250V single phase of 20 Amp rating with Contactor & Relay

Material and labour for earthing wth galvanised cast earth plate of size 600x600x6mm thick burried vertically in ground to a depth not less than 2.25mtr below GL with top edge of earth plate not less than 1.5mtr below GL the earth plate surrounded by adequate quantity of charcoal dust and common salt all around earth plate 15 cm and earth plate connected with GI strip 32X6 mm as earth continuity lead with nut, bolts or rivetted to earth plate one end, protection with GI pipe light grade 40 mm bore, GI pipe medium grade 15 mm bore watering pipe from earth chamber to earth plate, CI funnel with wiremesh fixed on water pipe and PCC 1:2:4 type B-1 using 20mm graded stone aggregate in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1 duly reinforced with MS bar 6mm dia @150 mm both ways and 10mm dia MS bar in lifting handle, including necessary excavation & earthwork etc all as shown in electirical plate No 3 of SSR Part-I and complete all as specified and directed. (Note:-On testing after completion if desired earth resistance does not obtain, the earthing shall be redone by contractor without any extra cost to Govt).

Material and labour for earthing wth galvanised cast earth plate of size 600x600x6mm thick burried vertically in ground to a depth not less than 2.25mtr below GL with top edge of earth plate not less than 1.5mtr below GL the earth plate surrounded by adequate quantity of charcoal dust and common salt all as around earth plate 15 cm, earth plate connected by 4 mm dia GI earth wire as earth continuity lead with nut, bolts and rivetted to earth plate one end, protection with GI pipe light grade 15mm bore, GI pipe medium grade 15mm bore water pipe from earth chamber to earth plate, CI funnel with wiremesh fixed on water pipe and PCC 1:2:4 type B-1 using 20mm graded stone aggregate in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1 duly reinforced with MS bar 6mm dia @150 mm both ways and 10mm dia MS bar in lifting handle, including necessary excavation & earthwork etc all as shown in electirical plate No 3 of SSR Part-I and complete all as specified and directed. (Note:-On testing after completion if desired earth resistance does not obtain, the earthing shall be redone by contractor without any extra cost to Govt).

Supply, laying and jointing LT XLPE Insulated, galvanized steel strip or wire armoured power electric cable (heavy duty) 1100 volt grade with aluminium stranded conductor of size 70 Sqmm x 3.5 core confirming to IS 7098 (Part-I) of 1988 passing through pipes, in duct, on poles, in trenches, under road etc complete all as specified and directed.

Supply, laying and jointing LT XLPE Insulated, galvanized steel strip or wire armoured power electric cable (heavy duty) 1100 volt grade with aluminium stranded conductor of size 35 Sqmm x 3.5 core confirming to IS 7098 (Part-I) of 1988 passing through pipes, in duct, on poles, in trenches, under road etc complete all as specified and directed.

Supply, laying and jointing LT XLPE Insulated, galvanized steel strip or wire armoured power electric cable (heavy duty) 1100 volt grade with aluminium stranded conductor of size 6 Sqmm x 2 core confirming to IS 7098 (Part-I) of 1988 passing through pipes, in duct, on poles, in trenches, under road etc complete all as specified and directed.

Note for item No 59, 60 & 61 :- Excavation & Earth Work for cable laying in treches shall be measured & paid under respective items of Sch 'A' Part-IV)

Supply & fixing Street light fitting 60 Watt LED new generation energy saving environmental freindly long life, pressure die cast aluminium housing with high power LED as light source and lens embedded PC cover having top opening separate driver compartment with IP-66 protection and impact resistance of IK07 with 10 KV built-in surge protection device including steel conduit pipe 20 mm bore, 6.00 mtr long (approx) fixed with FI clamps with nut & bolts etc including making connection with 1.5 Sqmm copper conductor cable wire from MCB box to street light complete all as specified and directed. Make- Crompton Cat Part No.LSTP-60CDL/C&S Cat Part No.LTESSI60WLED/LS/ Havells Cat Part No.ENDURAPEARLPLUSSL60WLED757SASYTOPC

M&L for mounting bracket of GI pipe 40 mm bore, light grade, 1.50m long bent to shape as required and fixed to pole/wall with nut, bolts and GI clamps of size 50 x 5mm as required including two coats of synthetic enameled paint over a coat of red oxide primer complete all as specified and directed.

S&F pole bus bar box size 450mm x 300mm x 200mm made out of 2 mm thick steel sheet powder coated hinged cover out door type and locking arrangement with having 4 Nos aluminium busbar of suitable size fixed on porcelain supports including 01 MCB SP, 6 Amps, mounted on electric pole by means of clamps of MS flat iron 25x4 mm with bolts and nuts complete all as specified and directed.

S&F pin type, porcelain, vitreous, white, brown or green insulator including one galvanised mild steel spindle,two galvanised iron washers and one galvanised iron nut, 150mm height, 150mm dia for working pressure 11000 volts grade with all fitting of HT overhead line, complete all as specified and directed.

Supply and fixing aluminium conductor, steel reinforced type for overhead lines on poles, restringing, tightening and binding with insulators complete all as specified and directed.

Supply and fixing earth continuity conductor or main earthing lead 36x6 mm galvanised iron strip fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. complete all as specified and directed.

S&F cable route marker made of galvanized iron with supporting angle iron 40x40x6 mm for stand and plate of size 150mm x 150mm and 2 mm thick steel sheet including two coats of synthetic enameled paint over a coat of red oxide primer and writing HT/LT cable route mark for suitable letter size, embedded in PCC blocks in 1:3:6 type C1 using 20mm graded stone aggregate, complete all as specified and directed.

Total amount of SCHEDULE 'A' PART-XA (EXTERNAL WATER SUPPLY) (For details see Schedule 'A' Part-XA in PDF folder)

SCHEDULE 'A' PART-XB (EXTERNAL WATER SUPPLY)

M&L for construction of brick masonry valve pit of following internally size 600mm x 600mm x 600mm with angle iron 25mm x 25mm x 4mm frame and 2mm thick mild steel plate cover painted with two coats of synthetic enameled paint over a coat of red oxide primer after preparation of surface including locking arrangement, including necessary excavation and earth work 75 mm thick PCC 1:3:6 type C1 using 20mm graded stone aggregate over 100 mm thick hard core using broken in foundation/base floor, brick work in cement mortar (1:6) in one brick thick wall and 15mm thick cement plaster in cement mortar 1:4 on internal surface of walls and outside upto 150 mm deep below ground level complete all as specified and directed at site.

Dismantling of old existing brick masonry valve pit chamber and M&L for construction of brick masonry valve pit internally size 900mm x 900mm x 900mm with angle iron 25mm x 25mm x 4mm frame and 2 mm thick mild steel plate cover, painted with two coats of synthetic enameled paint over a coat of red oxide primer after preparation of surface including locking arrangement and necessary excavation and earth work 75 mm thick PCC 1:3:6 type C1 using 20mm graded stone aggregate over 100 mm thick hard core using broken in foundation/base floor, brick work in cement mortar 1:6 in one thick wall and 15mm thick cement plaster in cement mortar 1:4 on internal surfaces of walls and outside upto 150 mm deep below ground level complete all as specified and directed at site.

Taking up existing GI pipe line of 150 mm bore for addition/alteration/lengthening including cutting & unscrewing and necessary excavation & earth work complete all as specified and directed

Taking up existing GI pipe line of 50 mm bore for addition/alteration/lengthening including cutting & unscrewing and necessary excavation & earth work complete all as specified and directed

S&F cast iron air release valve of size 150 mm, with single air outlets, conforming to IS:14845 fixed in cast iron water supply mains of 150 mm dia, including necessary fixing arrangement such as rubber insulation, packing rings, jointing materials, nuts & bolts, washers, gaskets etc complete all as specified and directed

Note: Tenderers may be noted that amount of credit Rs. 669490.00 will be deducted from the total amount arrived, at the time of acceptance of contract. (For details please refer Schedule of credit).

Prem singh kuwarbi and co

M/s DS Enterprises

M/S G. S. MATIYANI AND SONS

M/s J P Traders

DEVKI NANDAN ASSOCIATES

Kum Kum construction co.

OM TRADERS