Construction of Auditorium building at Rajiv Gandhi Ayurvedic College at Paprola Distt. Kangra H.P.

Amount

Cutting in earth work in all heights / depths and in all kinds of soil such as kankar, moorum, shingle and decomposed or soft rock, hard rock i.e. their intermediate classification and chiselling / wedging out of rock where blasting prohibited including saturated soils and filling in embankments etc.where necessary and disposal of all excavated unserviceable material in all leads and lifts including through mechanical transporation, the disposal of the unserviceable material will be done on approved dumping site. Any damage to the private / public property during execution will be restored by the contractor whatsoever the nature of the same may be. The serviceable materials will be stacked in specified dimensions in all leads and lifts as per the direction of the Engineer -in- charge.

Excavation in earth work and filling in 15 cm. layers in foundation and plinths including ramming , watering and consolidating upto all leads and lifts disposed earth to be levelled and neately dressed as directed by the Engineer -in-Charge.

Extra carriage of earth work filling by mechanical transport including loading and unloading up to 4 Km.

Excavation in drains and channels etc. in all kind of soils such as pick work, jumper work, chiseling wedging out of hard rock or soft rock upto all height including dressing of sides & and bed and disposing of excavated earth upto all lead & lifts / depth and disposed earth to be levelled and neatly dressed.including carriage of material in all lifts

Excavation in foundations, trenches etc. in earth work in all kinds of soils such as pick work, jumper work, and chiselling / wedging out of hard or soft rock up to all depths stacking the excavated soil not more than 3 meteres clear from the edge of excavation and then returning the stacked soil in 15 cms layers, when required into plinths, sides of foundations etc. consolidating each deposited layer by ramming and watering and then disposing off all surplus excavated earth as directed by the Engineer-in- charge.

Filling in plinth with sand under floor including watering, ramming, consolidating and dressing complete including carriage of material in all leads and lifts.

Providing form work with steel plates 3.15mm thick welded with angle iron frames 30x30x5mm so as to give a fair finish including centering, shuttering, strutting and propping, etc. with wooden battens and ballies heights of propping and centering below supporting floor to ceiling in all heights and removal of the same for in-situ reinforced concrete and plain concrete work including carriage of material in all leads and lifts.

Foundation, footing bases of columns etc. and mass concrete.

Flat surfaces such as soffits of suspended floors, roofs including inclined surfaces up to any degree, landings and the like: (i) Floors, etc. upto 200 mm in thickness.

Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters buttresses,plinth and string courses and the like.

Columns, pillars, posts and struts square, rectanagular or polygonal in plan.

Circular or curved in plan.

Stair cases with sloping or stepped soffits excluding landing.

Edges of slabs and breaks in floors and walls: Under 20 cm. wide.

Beams, cantilevers, girders and lintels sides and soffits of beams, small ends of beams,beam haunching, cantilivers, girders, bressumers and lintels not exceeding 1 metre in depth in all heights from floors.

Providing and laying cement concrete 1 : 4 : 8 (1 cement : 4 sand : 8 graded stone aggregate 40 mm nominal size) and curing complete (excluding cost of form work) in foundation and plinth including carriage of material in all leads & lifts.

Providing and laying cement concrete 1 :4 : 8 (1 cement:4 sand:8 graded stone aggregate 25 mm nominal size) and curing complete excluding cost of form work in foundation and plinth in breast and retaining walls etc. including carriage of material in all leads and lifts.

Providing and laying cement concrete 1 : 6 : 12 (1 cement : 6 sand :12 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of form work in foundation and plinth including carriage of material in all leads & lifts.

Providing and laying cement concrete 1 : 3: 6 (1 cement : 3 sand :6 graded stone aggregate 40 mm nominal size) excluding cost of centring and shuttering in foundation and plinth including carriage of material in all leads & lifts.

Providing and laying cement concrete having strength of M-20 mixed design aggregate mechanically mixed and vibrated and curring complete excluding cost of form work and reinforcement for reinforced concrete works including carriage of material in all leads & lifts.

Foundations, footings, bases of column and the like and mass concrete.

Walls (any thickness but not less than 0.10metre thickness) including attached pilasters buttresses,plinth and string courses etc. from top of foundation upto all floor level.

Suspended floor, roofs, landings, shelves and their support, balconies, beams, girders, bressumers and cantilevers in all heights.

Column, pillars, posts and struts upto all heights

Stair cases (except spiral stair cases) excluding landing but including preparing of the surface and finishing of nosing upto all heights.

Providing & laying cement concrete having strength of M-20 design mixed aggregate mechanically mixed and vibrated for reinforced concrete in chajjas upto any thickness upto all heights i/c finishing the exposed surfaces with cement mortar 1:3 (1 cement : 3 sand) to give a smooth and even surface, centering/form work and curing complete excluding cost of reinforcement including carriage of material in all leads and lifts.

Providing and laying cement concrete 1 :5 : 10 (1cement : sand :10 graded stone aggregate 40 mm nominal size) with 15 % plum and curing complete excluding cost of form work in retaining walls / Breast walls. the size of plums shall usually be 150 mm to 300 mm as per HPPWD specification including carriage of material in all leads and lifts.

Providing weepholes in brick masonry/stone masonry / plain reinforced concrete abutment, wing wall, return wall with 100 mm dia PVC pipe extending through the full with of the structures with slop of 1(V) : 20 (H) towards drawing face complete as per drawing and technical specification clauses 614,709,1204.3.7 including carriage of material in all leads and lifts.

Stone filling behind the Retaining wall including carriage of material in all leads and lifts.

Providing Tor steel /TMT Steel reinforcement for R.C.C. work including bending, binding and placing in position complete including cost of binding wire upto all heights including carriage of material in all leads and lifts.(Sail,Tisco or RINL)

Applying cement slurry on R.C.C . slab or cement concrete work using 2.75 kg of cement per sqm. of floor area before laying cement concrete flooring including roughening, cleaning of the concrete surfaces complete including carriage of material in all leads and lifts.

Providing throating, or plaster drip and moulding to RCC chajjas etc. including carriage of material in all leads & lifts.

Brick work using 2nd class common burnt clay building bricks in superstructure in cement mortar 1:6 (1 cement : 6 sand) including carriage of material in all leads and lifts.

Half brick masonry using 2nd class common burnt clay building bricks in superstructure above plinth level upto all heights in cement mortar 1:4 (1 cement: 4 sand) including carriage of material in all leads and lifts.

Random rubble masonry/polygonal rubble masonry (uncoursed/ brought to courses) with hard stone of approved quality in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 sand : 12 graded stone aggregate 20 mm nominal size) in cement mortar 1:6.(1 cement: 6 sand) including carriage of material in all leads & lifts.

Providing wood work in frames of doors, windows, clerestory windows and other frames wrought, framed and fixed in position 2nd Class Indian teak wood including carriage of material in all leads and lifts.

Providing and fixing 10 mm thick plaster of paris including cornices / mouldings on ceiling up to 5.00 Mtr. Above floor level woven plain G.I. wire, vertical G.I. Patti and mesh rendered smooth with plaster of paris complete in all respect and as per the direction of Engineer in Charge including carriage of material in all leads and lifts.

40 mm thick Cement concrete flooring 1:2:4 (1cement : 2 sand:4 graded stone aggregate 20 mm nominal size) laid in one layer finished with a floating coat of neat Cement including carriage of material in all leads and lifts.

50 mm thick cement concrete flooring 1:2:4 (1 cement:2sand:4gradedstone aggregate 20mm nominal size) laid in one layer finished with a floating coat of neat cement,including carriage of material in all leads and lifts.

Providing and laying 20mm. thick flamed granite stone in flooring 20mm (average) thickness base of cement mortar 1:3 (1cement: 3 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including rubbing and polishing complete including carriage of material in all leads and lifts.

Providing and laying 20mm. thick flamed granite stone in skirting 20mm (average) thickness base of cement mortar 1:3 (1cement: 3 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including rubbing and polishing complete including carriage of material in all leads and lifts.

Providing and laying 20mm.thick polished granite stone in flooring 20mm (average) thickness base of cement mortar 1:3 (1cement: 3 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete including carriage of material in all leads and lifts.

Providing and laying Duro stone vetrified tiles (any size and colour)10mm thick in grey/coloured or of approved shade in flooring ,treads of steps and landing laid on a bed of 12 mm thick cement mortar 1:3 ( 1 cement; 3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete including carriage of material in all leads and lifts.(Kajaria,Johnson and Nitco)

Providing and laying Duro stone vetrified tiles (any size and colour) 8mm thick in in grey/colouredof required shade in skirting risers of steps and dados on 12 mm thick cement mortar 1:3 (1 cement:3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete including carriage of material in all leads and lifts.(Kajaria,Johnson and Nitco)

Providing and laying 60 mm thick heavy duty precast cement conrete inter locking paver blocks/chequered tiles vibro compacted upto M-50 grade including border or kurb block grey or coloured over sub-base of concrete with 25mm thick average thickness of cement mortar 1:4 (1 cement : 4sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks including curing rubbing & polishing complete (Sub base concrete floor to be paid for separately) including carriage of material in all leads and lifts.

Providing and laying 3.9 mm thick teraflex flooring of approved quality fixed with adhesive including carriage of material in all leads and lifts.

50mm thick wooden flooring laid over angle iron frame work with bracing as per load condition including fixing of wooden planks over angle iron frame work in C.C./R.C.C. flooring including planning and levelling complete (Angle iron frame work to be measured & paid for seperatly) including carriage of material in all leads and lifts.

Providing and fixing 10mm thick vetrified matt finish NITCO tile water proof stain and impect resistent heavy duty vetrified tiles Nitco or equivalant (any size and colour) manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1 cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete including carriage of material in all leads and lifts.(Nitco & Kajaria)

Providing and fixing digital tiles 6mm thick of (any size and colour) in skirting risers of steps and dado in all heights 12mm thick cement mortar1:3 (1 cement:3 sand) and jointed with cement slurry including carriageof material in all leads and lifts.(Nitco & Kajaria)

Providing and fixing 0.60 mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6 mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer -in-charge including carriage of material in all leads and lifts.(Tata/Everest)

Providing and fixing ridges or hips 60 cm overall with 0.60 mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6 mm dia & prepainted G.I. limpet and bitumen washers complete with all accesoriees as required as per the direction of Engineer -in-charge including carriage of material in all leads and lifts.(Tata/Everest)

Providing and fixing valley 60 cm overall with 0.60 mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster organic coating back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6 mm dia & prepainted G.I. limpet and bitumen washers complete with all accesoriees as required as per the direction of Engineer -in-charge including carriage of material in all leads and lifts.(Tata/Everest)

Providing and fixing flushing 38 cm overall with 0.60 mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating +back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6 mm dia & prepainted G.I. limpet and bitumen washers complete with all accesoriees as required as per the direction of Engineer -in-charge including carriage of material in all leads and lifts.(Tata/Everest)

Providing and fixing 15 cm. wide 45 cm. overall semi circular 0.63mm thick sheet plain G.I. sheetgutter with iron brackets 40x3mm size bolts and nuts and washers etc., including making necessary conections with rain water pipe complete as per design,Including carriage of material in all leads and lifts.

Providing and fixing on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5kg/Sqm including filling the joints with approved adhesive complete, 150 mm dia including carriage of material in all leads and lifts.(Supreme , Finolex / Prince)

Providing and fixing on wall faces PVC (D-Plast) acessories for rain water pipes including filling the joints with approved adhesive complete including carriage of material in all leads and lifts. (Supreme , Finolex / Prince)

PVC Plain bend : 150mm diametre

PVC Plain shoe : 150 mm diametre.

Providing and fixing P.V.C. clamps of approved design to C.I. or S.C.I pipes embeded in and including cement concrete blocks 10 x10x10 cm of 1:2:4:mix (1 cement 2 sand 4 stone graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good thewalls etc. 150mm dia including carriage of material in all leads and lifts.

Providing and fixing M.S. BP Sheet 1.66mm to 2mm thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in charge, (Base members of steel work shall be measured and paid separately),including carriage of material in all leads and lifts.

Steel work welded in built up sections,trusses and framed work , including cutting , hosting,fixing in position and apply ing a priming coat of red lead paint, including carriage of material in all leads and lifts.

In beams joists channels,angles,tees,flats with connection plates or angle cleats as in main and cross beams ,hip and jack rafters, purlins connected to common rafters and the like.

In grating framed guards bars, ladders,railing, brackets and similar works.

Providing and fixing stainless steel railing mark-36 pipe sizetop-2' pipe, post pipe 1" and 3' hight in staircase including necessary fittings and positions complete as per design approved by the Engineer-In-Charge including carriage of materials in all leads and lifts.

Spray painting two coats ( excluding priming coat) on new steel and other metal surfaces with enamel paint spraying to give an even shade including cleaning the surface of all dirt, dust and other foreign matter including carriage of material in all leads and lifts.With enamel paint other than white.

6mm.cement plaster in cement mortar 1:3 ( 1 cement : 3 sand) to ceiling including carriage of material in all leads and lifts.

15mm cement plaster in cement mortar 1:6 (1 cement:6 sand) in single coat on fair side of brick/concrete/stone walls for interior plastering up to all heights including arrises, internal rounded angles chamfers and / or rounded angles not exceeding 80mm in girth and finished even and smooth including carriage of material in all leads and lifts.

20mm cement plaster in cement mortar 1:6 ( 1cement:6sand) in single coat on rough side of brick/concrete/stone walls for interior plastering up to all heights including arrises, internal rounded angles chamfers and / or rounded angles not exceeding 80mm in girth and finished even and smooth including carriage of material in all leads and lifts.

15 mm cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto all heights including arises, Internal rounded angles , chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth in cement mortar 1:4 ( 1 cement : 4 sand) including carriage of material in all leads and lifts.

Extra over item for finishing with a floating coat of neat cement slurry including carriage of material in all leads and lifts.

Applying Birla white wall care putty over plaster surface after througly brushing the surface free from mortar drops ,dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete including carriage of material in all leads and lifts.(Birla/JK/All tek)

Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surfaces to give an even shade including thoroughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth including applying of putty as required for making the surface including carriage of material in all leads and lifts.(ICI,Asian Paints (Tractor Acrylic) , Nerolac)

Applying priming coat on new concrete/masonry/asbestos cement/plastered surfaces after and including preparing the surface by thoroughly cleaning oil,grease,dirt and other foreign matter and sand papering as required with With readymixed prming paint brushing red lead, red oxide/ including carriage of material in all leads and lifts.(ICI , Asian Paints , Nerolac)

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc., including sand paper smooth complete , including carriage of material in all leads and lifts.(Snowcem India,Asian,Nerolac & Shalimar)

Providing and fixing anodised aluminium work for door, window, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawlplugs and screws or with fixing clips,or with expansion hold fastners including necessary filling up of gaps at junctions, at top,bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazinge/panelling C.P. brass/stainless steel screws. All complete as per architectural drawings and the directions of Engineer-In-Charge For doors windows and ventilatiors and glazed partitions frames including carriage of material in all leads and lifts.(Hindalco/Jindal)

Providing and fixing anodised aluminium work for door, window, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawlplugs and screws or with fixing clips,or with expansion hold fastners including necessary filling up of gaps at junctions, at top,bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazinge/panelling C.P. brass/stainless steel screws. All complete as per architectural drawings and the directions of Engineer-In-Charge For shutters of doors windows & ventilators including providing and fixing hinges/pivots and making provisions for fixing of fittings cost of PVC / neoprene gaskets as required (fittings and glazing / panelling shall be paid for separately) including carriage of material in all leads and lifts. (Classic,Everite or Sheel Marked)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partition etc with PVC / neoprens gasket etc. complete as per the architectural drawings and the directions of Engineer-In_charge (cost of aluminium snap beading shall be paid in basic item.) including carriage of material in all leads and lifts. (i) Glazing with glass panes of 4mm thickness (weight not less than 10.00 kg/sqm. (Saint Gobain, Modi Guard)

Providing and fixing stainless steel jali shutters for doors windows & clerestory window with I.S gauge desination 85G with wire of dia 0.56 mm including beading including carriage of material in all leads and lifts.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partition etc with PVC / neoprens gasket etc. complete as per the architectural drawings and the directions of Engineer-In_charge (cost of aluminium snap beading shall be paid in basic item.) including carriage of material in all leads and lifts. (ii) Glazing with glass panes of 5.50mm thickness (weight not less than 13.75 kg/ sqm.

Fixing anodized aluminium sliding door bolt as per colour and shade approved by the Engineer-in-Charge with bolts and nuts screws etc. complete including carriage of material in all leads & lifts.(i) 250x16mm (Labour Rate)

Fixing aluminium tower bolt (barrel type) as per colour and shade approved by the Engineer-in-Charge with screws etc. complete including carriage of material in all leads & lifts.(Labour Rate)

Fixing aluminium handles as per colour and shade approved by the Engineer-in-Charge with necessary screws including carriage of material in all leads & lifts.(Labour Rate)

Providing plinth protection 50mm thick in cement concrete 1:3:6 ( 1 cement:3 sand:6 graded stone aggregate 20mm nominal size) including finishing the top surface of concrete smooth including carriage of material in all leads and lifts.

Providing under layer for plinth protection of 75 mm thick ( unconsolidated) bed of dry brick / stone aggregate 40mm nominal size well rammed and consolidated and grouted with fine sand including preparation of ground complete including carriage of material in all leads and lifts.

Providing and fixing wall ceiling and floors confirming Plytheline – Aluminium - Polyethylene (PE-AL-PE) composite pressure pipe U.V. stabilized with carbon black confirming to IS-15450-2004 water supply including clamp at one metre spacing, cutting , fixing and making good the wall etc. but excluding the cost of fittings (internal work) pipes exposed on wall Internal work-Exposed on wall including carriage of material in all leads and lifts.

16mm nominal bore.

20mm nominal bore

25mm nominal bore

Providing and fixing composite end seal compression fittings as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fittings complete including cutting and making good the walls etc. including carriage of material in all leads and lifts.

(a) Equal Tees (i)1216

(b) Reducing Tee (i)1620 x all branches

(ii)2025 x with all branches

(c)Female branch tee (i)1216 X 1216 X 15 mm thread

(ii)1620 X 1620 X 20 mm thread.

(iii)2025 X 2025 X 25 mm thread.

(d)Female elbows:- (i)1216 X 15 mm thread.

(ii)1620 X 15 mm thread.

(iii)2025 X 25 mm thread.

(e)Male thread connector:- (i)1216 X 15 mm thread.

(ii)1620 X 20 mm thread.

(iii)2025 X 25 mm thread.

(f)Female thread connector:- (i)1216 X 15 mm thread.

(ii)1620 X 20mm thread.

(iii)2025 X 25 mm thread.

(g) Couplers : (i)1216

(h)Reducers: (i)1620 x 1216.

Providing and laying in trenches galvanised mild steel tubs (heavy grade) tube fittings (earth work in trenches to be measured and paid for separately) including carriage of materials in all leads and lifts.(a) 25mm nominal bore

Making connection of galvanised steel distribution branch with galvanised mild steel main 20mm to 40mm nominal bore by providing and fixing tee including cutting and threading the pipes complete including carriage of material in all leads and lifts.

Providing and fixing PVC water storage tank of ISI: 12701 marked, G.I inlet and outlet connection , 15 mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting upto all heights above ground level including carriage of material in all leads and lifts.1000 ltrs net capacity storage tank (Sintex only)

Providing and fixing PVC water storage tank of ISI: 12701 marked, G.I inlet and outlet connection , 15 mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting upto all heights above ground level including carriage of material in all leads and lifts.2000 ltrs net capacity storage tank. (Sintex only)

Providing and fixing 110 x 90mm PVC floor trap (ISI marked) of self cleaning design including fixing with approved adhesive,cost of cutting and making good the wall and floors etc, complete including carriage of material in all leads and lifts.

Providing and fixing high pressure PVC spigot and socket waste and ventilating pipes (ISI marked) including fixing with approved adhesive etc., comlete , including carriage of material in all leads and lifts.

150mm dia.

110mm dia.

90mm dia.

Providing and fixing PVC single equal branch with oval access door, (ISI marked) insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts.

110mm dia.

90mm dia.

Providing and fixing PVC collars (ISI marked) including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts.

110mm dia.

90mm dia.

Providing and fixing PVC plain bend (ISI marked) including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts.

110mm dia.

90mm dia.

Providing and fixing PVC clamps (ISI marked) of approved design with steel screws and rawl plugs etc. complete including carriage of material in all leads and lifts.

110mm dia.

90mm dia.

Providing and fixing 100 mm dia chromium plated grating of superior quality for gully, floor or Nahni trap including carriage of material in all leads and lifts.

Fixing vitreous china water closet squatting pan including all fitting including carriage of material in all leads and lifts.(Combo Toilet Seat) (Labour Rate)

Fixing vitreous china wall mounted urinal pot size 430x260x350mm including connection the urinals with waste pipe by means of while lead mixed with chopped hemp (waste pipe to be measured paid for seperately ) including carriage of material in all leads and lifts. (Labour Rate)

Providing and fixing vitreous china Division plate for urinal 600mm x 300mm (confirming to BIS specifications) including carriage of material in all leads and lifts.

Fixing vitreous china wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fitting including carriage of material in all leads and lifts. Circular:-i) 460mm dia (Countertop) (Labour Rate)

Fixing 32mm dia C.P. brass waste for wash basin or sink:, and confirming to BIS specifications.incldung carriage of material in all leads and lifts. (ESS-ESS/Jaquar) (Labour Rate)

Fixing 32 mm nominal bore M.I. union (confirming to BIS specifications) for wash basin or sink including carriage of material in all leads and lifts. (Hindware,Cera/Jaqoar) (Labour Rate)

Providing and fixing G.I./ M.I. union of the following sizes ( where not included in the item) including carriage of material in all leads and lifts.(i)25mm nominal bore.

Providing and fixing 600mmx450mm bevelled edge mirror of superrior glass mounted on 6mm thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P. brassscrews and washers including carriage of material in all leads and lifts. (Atul,Modi Guard,Saint Gobains)

Providig and fixing C.P. brass towel rail complete C.P.brass brackets ( fixed to wooden plugswith C.P. brass screws , and confirming to BIS specifications,600mm x20mm, including carriage of material in all leads and lifts. (ESS-ESS/Jaquar)

Providig and fixing C.P. brass towel ring complete C.P.brass brackets ( fixed to wooden plugs with C.P. brass screws) including carriage of material in all leads and lifts.(ESS-ESS/Jaquar)

Providig and fixing C.P. brass toilet paper holder including carriage of material in all leads and lifts.

Providing and fixing C.P. brass soap dish with C.P. brass brackets fixed to wooden plugs with C.P. brass screws, and confirming to BIS specifications,including carriage of material in all leads and lifts. (ESS-ESS/Jaquar)

Providing and fixing C.P. brass shower rose with 15 mm to 20 mm inlet 150 mm dia including carriage of material in all leads and lifts. (ESS-ESS/Jaquar)

Fixing brass bib tap (Superior or heavy type) 15mm dia including carriage of material in all leads and lifts. (Labour Rate)

Fixing brass bib tap 15 mm dia long body including carriage of material in all leads and lifts. (Labour Rate)

Fixing C.P. brass pillar tap wih capstan head :-15 mm dia swan neck including carriage of material in all leads and lifts. (Labour Rate)

Fixing C.P.brass angle valve 15 mm without nuts and pipe including carriage of material in all leads and lifts. (Labour Rate)

Providing and fixing PVC connection pipe with brass unions including carriage of material in all leads and lifts.45cm length 15mm nominal bore.

Providing and fixing brass full way valve with wheel (confirming to B.I.S specification) including carriage of material in all leads and lifts.

20mm nominal bore.

25mm nominal bore.

Providing and fixing stoneware gully trap grade"A" complete with C.I. grating. Brick masonary chamber in cement mortar 1:5 and water tight C.I. cover with frame of 300mmx300mm size (in side) the weight of cover to be not less than 4.53 kg and frame to be not less than 2.72 kg. including carriage of material in all leads and lifts. Square Mouth Traps: i)100mmx100mm size P type.

Constructing brick masonry chamber for under ground C.I. Inspection chamber and bends with common burnt clay building bricks in cement mortar 1:5 (1 cement : 5 sand ) C.I. Cover with frame (light duty ) 355mm x 610mm internal dimensions total weight of cover with frame to be not less than 38kg (weight of cover 23 kg. and weight of frame 15kg) R..C.C top slab with 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size ) foundation concrete 1:5:10 (1cement : 5 sand : 10 graded stone aggregate 40mm nominal size) inside plaster 15mm thick with cement mortar 1:3 (1 cement : 3 sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete including carriage of material in all leads and lifts.(i) Inside dimensions 455 mm x 610 mm x 450 mm deep single pipe line.

Cutting holes through existing brick/stone work including making good the same in cement mortar 1:6 (1 cement : 6 sand) per cms. Depth of cutting including carriage of material in all leads and lifts.(i) Holes upto and including 400 Sqcm in area.

Constructing manhole with RCC top slab in 1:2:4 mix ( 1 cement:2 sand :4 gradedstone aggregate 20mm nominal size) , foundation concrete 1:4:8 ( 1 cement :4 sand:8 gradded stone aggreagate 40 mm nominal size) in side plastering 15mm thick with cement mortar 1:3 ( 1 cement :3 sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix ( 1 cement:2 sand:4 graded stone aggregate 20mm nominal size) , finished smooth complete , curing and testing including carriage of material in all leads and lifts .(a) Inside size 800mmx800mm and 500mm deep including C.I. Cover with frame.( light duty single seal: pattern 1) 455 mmx610mm internal diamensions total weight of cover and frame to be not less than 38 Kg.weight of cover 23Kg. and weight of frame 15Kg. (i) With 230 mm thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3 ( 1 cement:3sand)

(ii) Inside size 1200mm x 900mm and 1000mm deep including C.I. Cover with frame ( Medium duty ) 500 mm internal diameters total weight of cover and frame to be not less than 116 Kg. (Weight of cover 58Kg. and weight of frame 58Kg. (i) With 200 mm thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3 ( 1 cement:3sand)

Extra over item for every additional depth of 0.10 metre or part thereof manhole from 1.0 metre to 1.5 metre depth including carriage of material in all leads and lifts.