PROVN OF 11 X 2 TON SPLIT AIR CONDITIONER FOR WARD DEPTS AND OPDs COMPLEX OF MH AHMEDABAD AND CERTAIN REVENUE WORKS UNDER GE (A) AHMEDABAD

Amount

Supply , install ,testing & commissioning of non inventor split indoor/ outdoor air conditioner electric driven single phase cooling capacity 6000K Cal per hour complete with cordless remote control unit and with in built air ioniser and plasma filter for better indoor quality with minimium BEE 3 Star rating of capacity 2.0 Ton with stand complete all as specified and as directed by Engr-in-Charge. Make :- Carrier Model No 24KDURAFRESHKX or equivalent in Hitachi / O General / Voltas.

S&F Single pole and neutral, socket outlet, with 2 pole and earth metal enclosure 20 amp recess mounted with chained metal cover for socket outlet with and including one number single pole 'C' series MCB 20 Amps as required. Make : Legrand cat ref No 607840 & 408590 or equivalent in Hager or Scheider as approved.

M&L for submain wiring with 2 X 6.0 sq mm + 1x6.0 sqmm earth continuity wire PVC insulated FR multistranded copper conductor cable (Phase - Red, Neutral- Black, Eart - Green) drawing into and including concealed rigid non metallic 20 mm dia PVC conduit, medium grade ISI marked invory colour alongwith accessories of PVC conduit complete all as specified and directed (Note : Three run of cables including PVC conduit its accessories chases and making good shall be measured and paid as one length).

Supply and fixing MCB DB Single pole neutral 4 way,240 volts AC ,of sheet metal phosphotised powder coated with 200 Amps,neutral bars ,earth bar complete all as specified and directed . Make:- Havells or equivalent model of Legrand / L&T.

S&F MCBs as per load requirement 'C' series of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of following ratings:-

Single pole 6 to 16 amp. Make - Indoasian cat ref no. 8536or equivalent in Schneider or Hager as approved.

Double pole 32 amp. Make - Indoasian cat ref no. 8536 or equivalent in Schneider or Hager as approved.

Supply and fixing MCB distribution board ETPN ,415 Volts 4 way Powder coated,CRCA steel sheet constucted as per IS :8623 ,degree of protection IP 43-IK 09 with metal door,recess mounted having insulated 100 Amp tinned copper bus bar ,neutral busbar ,earth bar, din bar,detachable gland plate ,interconnection ,earthing connection,blanking plates in unused spaces as required .Make:- Havells or equivalent model of Legrand / L&T.

Supply and fixing MCB Triple pole and neutral 415 Volts 63 Amp ,50 Hz 10 KA ,C series all as specified and directed .

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 16 sqmm 4 core complete all as specfied and directed.

M&L for good quality dry sand cushioning to under ground electric cable on layer of 8 cm thick before laying the cable and second layer of 15 cm thick after laying the cable all as specified in clause 19.75 of MES Schedule Part-I (2009) .Note :- Sand shall be fined sand as specified and punned thickness shall be measured and paid .

S&F steel tubes light grade galvanized 40 mm bore ISI marked with all fittings fixed to walls/floors/road crossing, poles as required complete all as specfied and directed.

Supply & laying sub class'B' bricks of old size (230x115x75 mm) or of size locally available ,laid along alingment of cable as protection to cable in trenches complete all as specified and directed by Engr-in-Charge

Surface dressing n exc 15 cm deep in soft/loose soil. complete all as specfied and directed.

Excavating in trenches, n.exc 1.5m wide & n.exc 1.5m in depth; for foundation, etc or for shafts, wells, esspits, manholes, pier holes, etc. nexc 10 sq m on plan & n exc 1.5 m in depth & getting out getting out in soft/loose soil complete all as specfied and directed.

M&L for plain Cement concrete1:4:8 type D2 using 40 mm graded stone aggt as in foundation, fillings & mass concrete complete all as specfied and directed.

Returning, filling in, including spreading, leveling, watering & well ramming in layer s not exc 25 cm in soft/loose soil complete all as specfied and directed.

Removing excavation material exc. 250m but n exc. 500m & deposited where directed at a level n exc. 1.5m above the starting point complete all as specfied and directed.

M&L for brick work with sub class 'B' bricks built in CM (1:6) straight or curved on plan & exc 6 m mean radius with old size bricks complete all as specfied and directed.

M&L Rendering 15mm thick on fair faces of brick work or concrete surfaces of block masonary or concrete surfaces in CM 1:6 finished even and smooth complete all as specfied and directed.

M&L for prepararion of new plsatered surface of wall with two coats of cement base paint over a coat of primer complete all as specfied and directed.

M&l for hardcore of guage n. exc63mm, deposited, spread & leveled in layers n exc. 15 cm thick, watered & rammed to a true surface complete all as specfied and directed.

S&F mild steel angle iron work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe290 (Gde-E-165)

M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified.

S&F PVC(SWR) 110mm dia soil waste and rainwater drainage pipes single socketed in any length with rubber ring joint laid in floor or fixed on wall complete all as specfied and directed.

S & F precast PCC kerbs stone machine pressed factory made of size 150x125x350 mm (L-150mm T-125mm H-350 mm) in PCC 1:2:4 type B-0 ( using 12.5 mm graded crushed stone aggregate) maximum depression from a straight edge, incl necessary earth work complete all as specfied and directed.

M & L 75mm thick plain cement concrete 1:4:8 type D-2 (40 mm graded stone aggregate) as in sub base complete all as specified and directed.

M& L providing precast cement concrete rubber moulded coloured interlocking tiles 60 mm thick (M-35 grade) with grey cement and pigment of approved design and pattern laid over a layer of 20 mm thick cement mortar in CM 1:6 including filling the joint with sand complete all as specified and directed by Engr-in-Charge

M&L for PCC 1:3:6 type C 1 using 20 mm graded agg as in copping incl. necessary form work & finishing exposed surface of concrete complete all as specified and directed.

M&L TMT bars 10 mm dia & over cut to length, bent to shape required including cranking bending spirally hooping for column, hooking ends & binding with & including mild steel wire anealed (not less than 0.9 mm dia) or securing with clips quality conforming complete all as specified and directed by Engineer-in-Charge

M&L for TMT bar 8 mm dia as in stirrups incl bending and binding with and including mild steel wire not less than 0.9 mm dia complete all as specfied and directed.

M&L Formwork to sides and soffits of floor or roof beams, beam haunch girders, bressummers,lintels, cantilevers, shelves including supports,overhangs etc. also splays between floors and beams, etc. complete all as specfied and directed.

M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work;not exceeding 200mm thick (Horizontal or sloping) complete all as specfied and directed.

M & L for providing reinforced cement concrete 1:1½:3 (Nominal Mix) type A-1, using 20 mm graded stone aggregate, as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs, shelves and the like complete all as specified and directed.

M & L for providing reinforced cement concrete 1:1½:3 (Nominal Mix) type A-1, using 20 mm graded stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5m span etc complete all as specified and as directed

M&L half brick thick brick work with sub class "B" bricks straight or curved on plan exc 6m mean radius built in CM (1:4) complete all as specified.

M & L providing PCC 1:3:6, type C2 (using 40 mm graded aggregate), 75 mm thick, finishing cement concrete surfaces even and fair without using extra cement, as in plinth protection, path etc including necessary form work and provision of bituminous joints mixed with bitumen and sand at intervals not exc 3.00mtr all as specified and as directred

M&L for 25 mm thick DPC in cement concrete 1:2:4 type B0 using 12.50mm graded aggregate to horizontal or vertical surfaces including necessary formwork complete all as specfied and directed.

M&L, cement concrete, 1:4:8 type D2(40 mm graded aggregate.) 100 mm thick as in sub base etc complete all as specfied and directed.

M&L Screed bed or bedding layer of mortar 15 mm thick in CM 1:6 for laying floor finishes

S&F Non skid coloured plain/printed tiles of size 300 x 300 x 7 mm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specfied and directed.

M&L, Rendering 15 mm thick on fair faces of brick or concrete surfaces in CM 1:4 on wall with water proofing component complete all as specified & as directed Note : WPC measered and paid seperately

M&L, Rendering 10 mm thick on fair faces of brick or concrete surfaces in CM 1:4 on ceilling finished even and smooth complete all as specified & as directed by Engineer-in-Charge

Supplying & applying Integral waterproofing compound all as specified & as directed by Engineer-in-Charge

S&F factory made solid panel pvc door shutter 30 mm thick (Style) consisting of frame made out of M.S. frame shall be covered with heat moulded wood grain printed PVC 'C' chanel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of wood grain printed sheet & 5 mm thick x 15 mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10 mm x 10 mm (90 degree) complete all as specfied and directed.

S&F solid PVC door frame of size 50 mm x 47 mm made out or 5 mm wood grain printed PVC sheet reinforced with MS square tube & edges painted to match with printed sheet complete all as specfied and directed.

S&F aluminium anodised ventilator with fixed aluminium frame of size 65 x 40 x 1.98mm thick fixed in vertical position with aluminium vertical members and half portion to be provided with 4mm thick pin head glass and remaining portion to be louvered using 4mm thick pin head glass and louvered portion covered with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm incl necessary channel frame work, including rubber gasket and aluminium beading complete all as specified.

M&L, applying 3 coats white washing on wall with preparing new plastered surfaces complete all as specified and directed by Engineer-in-Charge

M&L, applying 3 coats white washing on ceilling with preparing new plastered surfaces complete all as specified and directed by Engineer-in-Charge

M&L, applying 2 coats cement base paint over a coat of primer on wall & ceilling with preparing new plastered surfaces complete all as specified and directed by Engineer-in-Charge

S&F gun metal globe on gate valves with iron wheel head screwed both ends for iron pipe and fixed to 20 mm dia complete all as specified and directed

S&F Ball brass valves, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed to 20 mm dia pipe complete all as specified and directed

S&F stop valves fancy type chromium plated (concealed type) screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed

S&F, 32 mm dia low density polythelens (LDPE) pipes of prerssure rating 6 Kgf/Sq cm complete all as specified and directed

S&F 10 litre capacity PVC valveless syphonic action type flushing cistern, low level white with inlet ball valve float and handle including brackets complete all as specified and directed

S&F Water Closet (squatt pattern) of vitreous china squatting pan of pattern "ORRISA" pattern size 580 x 440 mm white with integral foot rests (excluding flushing cirstern and flush pipe) including connection to trap and flushing pipe anti syphon pipe etc complete including trap set in and including lime concrete complete all as specified and directed.

S&F, Vitreous China wash basin, white, flat back of size 550 x 400 mm including CI brackets, waste coupling ,waste pipe of 32 mm dia low density polythelen (LDPE) pipes of pressure rating 4 Kgf/Sq cm, brass CP pillar tap 15mm screwed down high pressure , PTMT bottle trap, pvc supply pipe 15mm from stop valve etc complete all as specified & as directed

S&F GI water tubes of bore 15 mm dia tubes medium grade with all fittings and fixed complete to walls and ceilling or laid in floors complete all as specified and directed

S&F GI water tubes of bore 20 mm dia tubes medium grade with all fittings and fixed complete to walls and ceilling or laid in floors complete all as specified and directed

Supplied and fixed CP Pillar taps cast copper alloy fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15 mm bore and fixed complete all as specified and directed

Supplied and fixed brass chromium plated tubular towel rail, 20 mm dia, D type 60 cm long between flanges complete all as specified and directed

S&F 200 mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed

S&F aluminium alloy anodised sliding door bolt with hasp and stapple ( bolt type) and fixing clips of sheet cast or extruded section with fixing bolts and sliding bolt of extruded section 300mm length & dia not less than 12mm with & including 6 Nos of bolts complete all as specified and directed.

S&F 150 mm long, extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed

S&F PVC connections 450 mm long, 15 mm size with PTMT nuts complete all as specified and directed

S&F PVC (SWR) pipes 75 mm bore, single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed

S&F PVC (SWR) bends any radius, 75 mm bore complete all as specified and directed

S&F PVC (SWR) vent cowl, 75 mm dia complete all as specified and directed

S&F 75 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed

M&L Salt-glazed stoneware drain pipes 150 mm dia laid in trenches and jointed complete all as specified and directed

M&L Cement concrete 1:4:8 type D2 concrete bed to drain pipe of dia 150 mm including packing under and hounching against the sides of pipes after they are laid and tested complete all as specified and directed

S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed

M/L for PCC 1:2:4 type B1 using 20mm size graded stone aggregate as in benching of manholes including making drains and necessary form work finishing even and smooth with using extra cement complete all as specified and directed

M & L Pre cast reinforced cement concrete 1:2:4 type B1 (Using 20mm graded stone aggregate) set in cement mortar 1:4 for man holes cover slab complete all as specified and directed

S&F Vitreous China urinals, half stall type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete fittings including flush pipe complete all as specified and directed.

S&F rotational moulded polythene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position 500 ltrs capacity complete all as specified and directed

Taking down chowkats or frames with shutter (without taking off shutter from frame) exc 1.5 Sqm but n.exc 4 sqm each complete all as specified and directed

Taking down chowkats or frames (without taking off shutter from the frame) not exceeding 1.5 Sqm each complete all as specified and directed

Demolition of cement concrete (un-reinforced) in ground floors and paving n.exc 15cm thickness (below or above ground level) complete all as specified and directed.

Taking down cement plaster on brick or stone walls, concrete walls etc including raking out joints,hacking for key, scrubbing down with water etc complete all as specified and directed

M&L 15mm thick rendering in cement mortar 1:6 on other than fair face of brick work or concrete surface finished the plastered surface even and smooth without using extra cement complete all as specified and directed.

M & L for preparation of new plastered surfaces on walls and applying two coats of oil bound distember over one coat wall primer over one coat of wall care putty 2mm thick for smoothening surface complete all as specified and directed

M & L for complete removal of existing treatment and applying two coats of Oil bound distemper over one coat wall primer over one coat of wall care putty 2mm thick on old plastered and unplastered surfaces on walls complete all as specified and directed by Engr- in-Charge

S & F powder coated anodised Aluminium alloy sections sliding windows with frames Series-C (20mm) of Jindal or equivalent and 3 track sliding shutters duly fitted with neoprene beading, glazing clips, two shutters tinted glass panes 4.8 mm nominal thickness one shutter with stainless steel wire cloth .36mm dia and average width of aperture 1.4mm , aluminium alloy handles/lock etc. complete all as specified and directed. Note: Thickness of chowkhats/Frame section and sliding shutter section shall be minimum 1.5mm (Note :Rates include all glazing/aluminium wire cloth, rubber packing, jointing cleats, glazing clips, aluminium snap beading, locking arrangements, handle, plastering and finishing the surface to match the exisiting surface after fixing of window.)

M & L aluminium decogrill medium grade of mesh size 75mmx75mm with 6mm square anodised aluminium bars fixed with aluminium frame of size 37x19x2mm all as specified and directed.

S&F powder coated anodised Aluminium door frame of size 100 x 44 x 1.98mm thick with one or more rebates and shutters pull and push type or side hung type (with or without aluminium sash bars) comprising of top & lock rails of section 115 x 44 x 1.98 mm thick, bottom rail of section 150 x 44 x 1.98mm thick and stiles of section 85 X 44mm X 1.98mm thick including necessary jointing cleat, glazing clip, rubber packing anodized aluminium beading, screws, anodized aluminium fittings such as floor spring or hinges 100mm size with hydraulic door closer, handles 'D' type 125mm, floor door stoppers, tower bolt 200 mm, sliding door bolt 300 mm or mortice lock,hydraulic door closer with 5mm thick tinted glass / preleminated particle board (Novapan) panel and making good of wall surface to match existing surface complete all as specified

M & L for non skid ceramic (colored) tiles 7 to 8 mm thick as in floor area of each tile exceeding 0.18 Sqm but n exceeding 0 .38 Sqm , set and jointed in neat cement slurry and pointed in white or colored cement to match incl and over screed bed or beeding layers of mortar 15mm thick in CM 1:6 in floors, complete all as specified and directed.

S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 485mm x 420mm bowl size 410mm x 3330mm x 160mm complete all as specified and directed

M & L for countertop madeout of Granite (of any type) work (table rubbed and polished) of 20 mm thick in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.( All exposed surfaces should be bull nosed) complete all as specified and directed

S & F Glazed ceramic tiles in vertical surface 450X350X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match of Glazed ceramic coloured tiles in vertical surface in dados and rendering 10mm thick in CM 1:4, complete all as specified and directed.

S&F for 15 mm Bib taps, fancy type, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed

M&L for point wiring with 1100 volts grade PVC insulated FRLSH multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal boxes of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulators complete for the following :-

One light point controlled by one switch.

One fan point controlled by one switch.

M&L for point wiring with 1100 volts grade PVC insulated FRLSH multistranded copper conductor cable 2.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 2.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal box of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for one 16 amp socket outlet controlled by one switch on independent board complete.

S&F angle holder, insulated polycabonate body with back plate complete.

S&F switch piano flush button single pole one way 6 amp complete.

S&F switch piano flush button single pole one way 16 amp complete.

S&F socket outlet 2 in 1, 3 pin 6 & 16 amp flush type complete.

S&F ceiling rose 6 amp, 3 plates polycarbonate body complete.

S&F LED batten (1.2 m) made of Aluminium housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficacy of 100+ lumens per watt and total power consumption not less than 20 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a color temperature of 6500K, CRI>80, THD < 10% and PF > 0.95 complete. Make : Philips cat ref no. ENDURALED BATTEN " BN 108C LED 20S PSU CDL WH " or Havells Lumiline plus or equivalent in Wipro as approved.

S&F LED bulkhead fitting 9 watt IP 66 & IK 09 with pressure diecast aluminum housing & polycarbonate diffuser duly prewired for connection with flexible multi stranded copper conductor cable as required all as per Philips cat ref no. WT202W LED6S CW PSU S1 PC or equivalent in Wipro or Bajaj or Havells as approved.

S&F MCB distribution board SPN, 240 volts, 4 ways powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required.

S&F MCBs as per load requirement 'C' series of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of following ratings:-

Single pole 6 to 16 amp. Make - Legrand DX3 cat ref no. 408587 to 408592 or equivalent in Schneider or Hager as approved.

Double pole 32 amp. Make - Legrand DX3 cat ref no. 408636 or equivalent in Schneider or Hager as approved.

S&F air ventilation fan 250 mm in toilet in rectangular in shape, PVC body, white colour 230V including louber shutter complete all as specified and directed. Make : Bajaj / Havells / Crompton

Cutting existing steel tubing for alterations or aditions of pipe size 40/50 mm bore and screwing complete.

M&L for stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe 20 mm bore complete all as specified and directed

M&L for gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe 50 mm bore complete all as specified and directed

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 sqmm 2 core complete. Make - Havells / Polycab / Finolex as approved.

ALPINE CONSTRUCTIONS

nirman construction