8255 REPAIR TO INTERNAL WIRING AND FITTINGS CEILING FANS, EXHAUST FANS, AIR CIRCULAR PVC EXHAUST FAN SUB MAIN WIRING DB,S AND CONNECTED WORK ALONGWITH BLDG SECURTY LIGHT OF OTM OR / MD ACCN UNDER GE (E) BAREILLY.

Amount

Taking down carefully old U/S point wiring copper/Aluminum (light/ fan / sockets/ power) complete with switches, sockets, ceiling roses, lamp holders, brackets & other fitting & Fixtures connected, and making good to disturbed surfaces as directed.

Taking down electric meter and disconnecting, removing to store for keeping in safe custody for refixing etc Complete all as specified & as directed.

Taking down main switch / MCB/ DBS including MC BS etc of any size removing for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of wall, floors etc Complete all as specified & as directed.

Taking down submainwiring/service cable including earth wire and making good disturbed surfaces to match with the existing surfaces of walls incuding removing of site complete all as specified and directed.

M&L for point wiring with FRLS PVC insulated, un-sheathed, multi stranded copper conductor cable of 1.5sqmm size, 1100 volts, drawn through & including concealed 20 mm rigid non metalic PVC conduit with all accessories fixed on wall/ceiling/truss including FRLS PVC insulated, unsheathed, multi stranded copper conductor cable of 1.5sqmm size as earth continuty conductor connected to common earth dolly including required numbers and size of sunk cast pressed steel terminal box made out of MS sheet 1.25 mm thick for mounting of fittings like switches, switch sockets, sockets, regulators etc with 3 mm thick hylum laminated sheet cover including cutting Chases pinning in, for concealed conduit wiring and making goods of disturbed surface not exc 15 cm girth complete all as specified and as directed for:- NOTE: (a) Colour coding shall be followed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Electrical wiring above false ceiling shall be drawn through medium grade PVC conduit.

One light point / Fan point / Exhaust point / Bell point controlled by one 5A switch

One 5A flush type socke out let t point on same board board

One 5A flush type switch socket point on independent board

All as per Srl item No 5 here in before but One 3 pin socket outlet 15 Amp independent with cable of size 2.5 Sqmm for wiring and earth wire

M&L for point wiring with FRLS PVC insulated, un-sheathed, multi stranded copper conductor cable of 1.5 Sqmm size, 1100 volts, drawn through and including non metalic rigid PVC casing and caping not less than 25mm with all accessories fixed on wall / ceiling / truss including FRLS PVC insulated, unsheathed, multi stranded copper conductor cable of 1.5 Sqmm size as earth continuty conductor connected to common earth dolly including required numbers and size of MS boxes / non metallic rigid PVC Terminal boxes with cover plate in any size fixed on wall for fixing the switches, switch sockets, sockets, regulators etc complete all as specified for:- NOTE: (a) Colour coding shall be followed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Electrical wiring above false ceiling shall be drawn through medium grade PVC conduit.

One light point / Fan point / Exhaust point / Bell point controlled by one 5A switch

One 5A flush type socket outlet point on same board board

One 5A flush type switch socket point on independent board

One light point controlled by two way switch.

All as per Srl item No 7 here in before but One 3 pin socket outlet 15 Amp independent with cable of size 2.5 Sqmm for wiring and earth wire

M&L for point wiring with FRLS PVC insulated, un-sheathed, multi stranded copper conductor cable of 1.5sqmm size, 1100volts, drawn through & exisiting rigid non metalic PVC conduit with all accessories fixed on wall/ceiling/truss including FRLS PVC insulated, unsheathed, multi stranded copper conductor cable of 1.5sqmm size as earth continuty conductor connected to common earth dolly including required numbers and size of sunk cast pressed steel terminal box made out of MS sheet 1.25 mm thick for mounting of fittings like switches with 3 mm thick hylum laminated sheet cover plate in any size fixed on wall for fixing the switches, switch sockets, sockets, regulators etc complete all as specified for:- NOTE: (a) Colour coding shall be followed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Electrical wiring above false ceiling shall be drawn through medium grade PVC conduit.

One light point / Fan point / Exhaust point / Bell point controlled by one 5A switch

One 5A flush type socket out let point on same board board

One 5A flush type switch socket point on independent board

One light point controlled by two way switch.

All as per Srl item No 9 here in before but One 3 pin socket outlet 15 Amp independent with cable of size 2.5 Sqmm for wiring and earth wire

S&F switch piano flush type single pole one way 5 Amps Complete all as specified & as directed.

S&F in repairs Modular switch one way 6 Amp, one module,. Complete all as specified & as directed.

S & F in replacement of switch, piano flush type, single pole, one way, 5/6 Amps complete all as specified and directed.

Supply and fix switch sockets combination 5 pin 5 Amps flush type 240 Volts AC complete all as specified and directed.

S&F in repairs Modular Switch one way 16 Amp, one module Complete all as specified & as directed.

S & F in replacement of Bell push, 5/6 Amps, 240 volts SP complete all as specified and directed.

S&F in repairs Modular Bell push 6 Amp one module complete all as specified & as directed.

S&F in switch Socket combination 2 in 1, 3 pin 5 Amp flush type.Complete all as specified & as directed. make- Havells, Anchor.

S&F in repairs Modular Socket 6 Amp, 2 / 3 pin combined 2 module, Complete all as specified & as directed

S&F switch socket combination 2 in 1, 3 pin 6 Amp and 16 Amps Complete all as specified & as directed

S&F in repairs Modular socket 6A/16A, 2/3 pin combined 2 module. Complete all as specified & as directed.

S & F in replacement of Bell, DINGDONG type, 6 Amps, 240 volts, SP complete all as directed.

S&F Lamp holder ( batten/angle ) PVC/Polycarbonate type with back plate for batten/angle fittings.Complete all as specified & as directed.

S&F in repairs Lamp holder ( batten/angle ) PVC/Polycarbonate type with back plate for batten/angle fittings.Complete all as specified & as directed.

S & F Ceiling rose, PVC/polycarbonate insulated body type, 3 terminal, 240 volts, 5 Amps complete all as specified and directed.

S & F in replacement of Ceiling rose, PVC/polycarbonate insulated body type, 3 terminal, 240 volts, 5 Amps complete all as specified and directed.

Fixing only old serviceable light fittings any type received from item No-1 above including electric connection & cleaning complete.

Fixing only old serviceable LED Tube light fittings 18/20 Watt, 4' complete received from item No.-1 above including cleaning & connecting up with New 3 core flexible copper conductor cable of suitable size.

S & F in repairs Lamp LED 15 Watt 230 Volt complete all as specified and directed.

S & F in repairs Lamp LED /10 Watt 230 Volt complete all as specified and directed.

S & F recharge able Lamp LED 15 W 230 Volt complete all as specified and directed.

S & F in repair LED retrofit tubes18/ 20 Watt, 4' Complete all as specified & as directed

S&F in repairs LED Tube light fittings 20 Watt ( T-8 ), 4' builtin electronic driver with THD<10% and lumen efficacy >=115Lm/W complete with retrofit tube including connecting up with 3 core flexible copper conductor cable of suitable size Complete all as specified & as directed.

S&F in repairs LED Tube light fittings 10 Watt ( T-8 ), 2' builtin electronic driver with THD<10% and lumen efficacy >=115Lm/W complete with retrofit tube including connecting up with 3 core flexible copper conductor cable of suitable size Complete all as specified & as directed.

S& F in repairs Noble LED strip light 6 watt IP 20 with LED Driver+ power cord cut-table after 3 LED 50000 burning hours (Amber) SM for POP complete all as specified and directed

S&F in repairs LED bulk head luminaire hexafit 10 watt LED environmental friendly, ultra modern, energy saving, surface mounted, decorative hexagonal bulk head back lit LED luminaries comprising of high brrightness LED complete all as specified & as directed. Make: C&S/Havells/Bajaj/Phillips/ Crompton as approved by GE.

S&F in repairs LED Ceiling light 9/10Watt THD<10% round surface mounted die cast aluminium housing with frosted diffuser including LED lamp 12 Watt Complete all as specified & as directed. Make: C&S/Havells/Bajaj/Phillips / Crompton as approved by GE.

S&F in repairs Recess mounting LED ultra slim Ceiling light 2'X2', 35/36 Watt THD<10% complete all as specified and directed. Make: C&S/Havells/Bajaj/Phillips / Crompton as approved by GE.

S&F in repairs surface mounting type LED ultra Ceiling light 2'X2', 28 Watt THD<10%complete all as specified and directed. Make: C&S/Havells/Bajaj/Phillips / Crompton as approved by GE.

S &F in repairs surface mounting type LED ultra Ceiling light 1'X1', 18 Watt complete all as specified and directed. Make: C&S/Havells/Bajaj/Phillips /Crompton as approved by GE.

S&F in repairs round shape 15 watt surface mounted LED down lighter with white powder coated alu housing with integrated electrinic driver THD<10% 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified & as approved by GE.

S&F in repairs round shape 10 watt recessed mounted LED down lighter with white powder coated alu housing with integrated electrinic driver THD<10% 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified & as approved by GE.

S&F in repairs LED Wall bracket type CITY-2 fitting 15 Watt complete all as specified. Make: C&S/Havells/Bajaj/Phillips / Crompton or equivalent as approved by GE.

S&F in replacement new generation post top energy saving environment friendly, long aesthetically designed with symmetrical light distribution spun aluminium landscape luminaire with high power LEDs as light source of 20 Watt LED , clear cover light illumination for differnt applications suitable for pole dia 50 mm of complete all as specified and directed

S&F in repairs stepped, (socket/switch type) electronic fan regulator flush type Complete all as specified & as directed. 180 Watt, 240 Volts. Make- Anchor/Bajaj or equivalent as approved by GE.

Fixing only and connecting electric meter upto 25 Amp(Item received form ser No 2 here in before) complete all as specified and as directed.

Fixing only sub main wiring with 2 run of FR PVC insulated & unsheathed multistranded copper conductor recieved fron item No 4 above alongwith one run of FR PVC insulated & unsheathed multistranded copper conductor drawn in & including PVC conduit/casing capping complete all as specified & directed.

M&L in repairs sub main wiring with 2 run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm alongwith one run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm as earth continuity conductor drawn in & including PVC conduit complete all as specified & directed.

M&L in repairs sub main wiring with 2 run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm alongwith one run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm as earth continuity conductor drawn in existing including PVC conduit complete all as specified & directed.

M & L in repairs sub main wiring with 2 run of FR PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm alongwith one run of FR PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm as earth continuity conductor drawn in & including PVC casing & capping complete all as specified and as directed.

M&L in repairs for sub main wiring with 2 run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm alongwith one run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm as earth continuity conductor drawn through in existing PVC conduit complete all as specified and as directed.

M&L in repairs for sub main wiring with 2 run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm alongwith one run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm as earth continuity conductor drawn through in & including PVC conduit complete all as specified and as directed.

M&L in repairs for sub main wiring with 2 run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm alongwith one run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm as earth continuity conductor drawn through in & including PVC casing & capping complete all as specified and as directed.

M&L in repairs for sub main wiring with 2 run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm alongwith one run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm as earth continuity conductor drawn through in & including PVC casing & capping complete all as specified and as directed.

S & F in repairs of PVC rectangular block for mounting switches, sockets, fan regulator etc. with 3mm thick plastic laminated sheet cover of size 250 X 200 X 50 mm deep complete. ISI marked.

S&F in repair of any size of sunk cast pressed steel terminal box made out of MS sheet 1.25 mm thick for mounting of fittings like switches, switch sockets, sockets, regulators etc suitable to accommodate to existing switching board

S & F in repairs of 2.8mm thick rectangular plastic laminated sheet cover of size 300 x 250 mm including cutting holes for mounting switches, sockets, fan regulators etc as pre requirement including fixing with sufficient no. of machine screws & washers complete all as specified

S&F in repairs single pole and neutral enclouser having IP -67 protection with a three pin & earth plug with socket complete and one SP, 20 A , 240 V MCB complete all as specified and directed

S&F in repairs single pole and neutral enclouser having IP -67 protection with a three pin & earth plug with socket complete and one SP, 32 A , 240 V MCB complete all as specified and directed

S&F in repairs sheet metal enclousers (DBS) when MCBs to be used 4 way, 240 Volts double door single pole & neutral with 200 Amps rated bus bar complete all as specified and as directed.

S&F in repairs sheet metal enclousers (DBS) when MCBs to be used 8 way, 240 Volt, double door single pole & neutral with 200 Amps rated bus bar complete all as specified and as directed.

S&F in repairs sheet metal enclousers (DBS) when MCBs to be used 12 way, 240 V, double door single pole & neutral with 200 Amps rated bus bar Complete all as specified & as directed.

S&F in repairs sheet metal enclousers (DBS) when MCBs to be used 4 way, 415V, double door tripple pole & neutral with 200 Amps rated bus bar Complete all as specified & as directed.

S&F sheet metal enclousers (DBS) when MCBs to be used VTPN 4 way double door with 200 Amps rated bus bar with MCCB incommer .

S&F in repairs MCB 415V, 10KA, TPN , 63Amps to 100Amp complete all as specified and directed.

S&F in repairs MCCB 415V, 16KA, 4 Pole , 63Amps to 100Amp complete all as specified and directed.

S&F in repairs MCB single phase and neutral 16A-63A, 230V 10KA. B' curve type complete all as specified and directed.

Fixing only old serviceable MCBs single phase and neutral 16A-63A, 230V 10KA complete all as specified & as directed. (MCB received from item No-4 here in before).

S&F in repairs MCB SP 6A - 32A, 230V, 10 KA, B' curve type complete all as specified and directed

Fixing only old serviceable MCB SP 6A-32A, 230V. 10KA Complete all as specified & as directed. (MCB received from item No-3 here in before).

S & F in repairs Cable weather proof flat twin core with aluminium conductor multi stranded of size 6 sqmm, 1100Volts grade complete all as specified and directed.

M&L for earthling complete with Galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directrly in ground (earth pit not less than 2.25 mtr deep blow GL with top edge of earth plate not less than 1.5 Mtr below normal ground level, earth plate surrounded from all sides by 15 cm thick packed layer of vharcoal dust and common salt filled in alternate layers and electrode connections by using Galvanised earth strip 32 x 6 connected by means of bolts, nuts, check nuts and washer of galvanized iron or steel, provision of 40 mm dia GI pipe light grade for protection of GL earth strip and 20 mm dia GI pipe medium grade for watering arrangement and PCC (1:3:6) type B1 chamber, MS funnel, wire mesh, 50 mm thick RCC 1:2:4 type B1 earth pit cover with 6 Nos, 8 mm dia high strength deformed steel TMT bars on both ways including necessary excavation in any type of soil, returning, filling in, removal of surplus soil to distance n exc 50 Mtr, Provision of charcoal and slat complete all as shown in electrical plate No 3 of schedule SSR Part-I. Note : (i) Cost of GI earth strip and GI protection pipe upto 7.5 mtr length shall be deemed to be included in the rate quoted for this item. (ii) The unit rate shall also includes for Wire mesh, funnel, excavation, returning filling, removing, PCC chamber pit RCC cover, test point etc.

Taking down Ceilings/Walls/AirCirculator and refixing the same after repairs/painting in original position including fixing of nut, bolt & split pin and provision of new three core flexible PVC insulated multistranded copper conductor cable 1.0 sqmm from ceiling rose to fan complete all as specified and directed by Engr-in-charge.(Note- Repair work/ painting and cable for connection shall be measured and paid separately )

All as per item no. 73 (here in before) but Exhaust fans of any sweep complete as specified or directed

M&L for dismantiling the ceiling fan of any sweep/wall mounted fan/Air circulator fan , cleaning the surfaces throughly and applying a spray coat of synthetic existing enamel paint over one coat of red oxide primer including rewriting MES no. on fan complete all as specified and directed by Engr-in-Charge.

All as per Srl item No 75 here in before but Exhaust fans of any sweep.

M&L for dismentiling the Stator & Rotor of ceiling fan of any sweep,taking out the burnt copper wire, cleaning the Stator & Rotor with CTC, rewinding the fan with existing gauge and same nos of turns with super enameled copper including varnishing, baking, replacement of sleeves etc and reassembling the fan & testing, complete all as specified and directed.

All as per Srl item No 77 here in before but Exhaust fan of 300mm sweep complete all as specified & directed.

All as per Srl item No 77 here in before but Exhaust fan of 375/450mm sweep complete all as specified & directed.

All as per Srl item No 77 here in before but Wall mounted fans complete all as specified & directed.

Dismantiling the ceiling fan of any sweep, examine complete part thoroughly , oiling, greasingall parts and complete overhauling of fan including replacement of spares such as bearings, bushes, split pin, nuts, bollts, clamps, screws and reassembling complete fan and making fully functional coplete all as specified and directed by Engr-in-Charge. [Note:- Spares like Bearings, Bushes, Capacitor & others shall be measured and paid separetely.]

All as per Srl item No 81 here in before but Exhaust fans of any sweep complete all as specified & directed.

All as per Srl item No 81 here in before but Wall mounted fans complete all as specified & directed.

All as per Srl item No 81 here in before but Air Circulator fans complete all as specified & directed.

Supply & Fix in repairs metal bush made out of Gun metal/Brass suitable for ceiling fans/ Exhaust fans of anysweep.

Supply& fix in repairs ball bearings suitable for ceiling fan of any sweep complete all as specified & directed.

Supply & fix in repairs ball bearings suitable for Exhaust fan of any sweep complete all as specified & directed.

Supply & fix in repairs capacitor 2.5 Mfd for ceiling fan , 415 , 50Hz. Make- Universal/Tibcon or equivalent as approved by GE.

Supply & fix in repairs capacitor wall mounted fan 2.0 Mfd, 415V, 50Hz Make- Universal/Tibcon or equivalent as approved by GE.

Supply & fix in repairs capacitor 3.15/4.0 Mfd for exhaust fan , 415 V,50Hz Make- Universal/Tibocon or equivalent as approved by GE.

Supply & Fix in repairs fan hook clamps steel suitable for ceiling fan hanging complete all as specified & directed

Supply & fix in repairs rubber reel for ceiling fan hanging complete all as specified & directed

Supply & Fix in repairs fan down rod made of 15 mm bore GI pipe, 60 cm long complete all as specified & directed.

Supply & Fix in repairs Canopy PVC suitable for fixing on fan down rod with screws etc complete all as specified & directed

Supply & Fix in repairs Fan blades complete with nuts & washers and complete all as specified & directed.

Supply & Fix fan hook steel with suitable nut bolts for fixing arrangement on GI Pipe for ceiling fan hanging complete all as specified & directed

Supply & Fix nut, bolt,washer and split pins suitable for fixing of fan clamps with down rod& hanging of ceiling fan complete all as specified & directed

Supply & Fix in replacement of burnt rotor assembly complete for 1200mm sweep ceiling fan all as specified and directed.

Supply &Fix in replacement of burnt stator assembly complete for 1200mm sweep ceiling fan all as specified and directed.

Supply & fix in repairs metalic Exhaust fan blade with MS frame for 300mm sweep Exhaust fan complete all as specified and directed.

Supply & fix in replacement of burnt motor kit for PVC Exhaust fan 250mm sweep complete all as specified and directed.

S&F in repair exhaust fan made out of sturdy engineering plastic complete with all louvers shutter voltage 230 V, 50 Hz RPM 1200, copper winding accessories including electric connection with three core flexible PVC insulated copper conductor multistranded cable 1.0 sqmm complete all as specified and directed.

S&F in repair ceiling fan complete with three blades , down roads, accessories 230 V , 1200 mm sweep with all accessories including electric connection with three core flexible PVC insulated copper conductor multistranded cable 1.0 sqmm complete all as specified and directed.

S&F in repairs PVC insulated sheathed flexible multistranded copper conductor cable 3 core 1.0 sqmm, 1100 Volts grade complete all as specified and directed.

S&F in repairs GI bracket made out from GI pipe 25/32mm dia, 1.20 m long fixed on wall with and including nut, bolts and GI clamps of size 25x4mm as required & including painting etc complete.

S&F in repairs new generation LED building security light fitting 25 Watt 230 Volts AC out door type energy saving and envrionmental friendly long life LED street light made out of with high pressure die cast aluminium housing with high efficiency LED asc lighting source and lens embeded PC cover having bottom opening seperate driver component with IP 66 protection and impact resistance of IK08 including electric conection complete all as specified & directed.

N S ELECTRICALS