CA NO. CWE/HILLS/RKT/06 OF 2025-2026 SPECIAL REPAIR OF, ROAD TO UPPER KALIGADHERA PUMP HOUSE, ROAD FROM HELIPAD TO MAIN MAJKHALI, INTERNAL ROAD AT THE KUMAON REGIMENTAL CENTRE, PCC ROAD FROM MT AREA TO GANDHI LINE BETWEEN BUILDING NO P-50 TO P-52, IN

Amount

Excavating in post holes each n exc 0.5 cum getting out returning filling in and ramming earth or broken rubble mixed with erth around in layer not exceeding 25 cm in hard & dence soil complete all as specified and as directed.

Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc or n. exc.10 Sqm on plan and n. exc. 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out hard and dense soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

Removing excavated material not exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed.

M&L for cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundation, filling & mass concrete complete all as specified and directed.

M & L for plain cement concrete 1:3:6 (40 mm graded aggregate) for surface channel and drain complete all as specified and directed.

M & L for plain cement concrete 1:2:4 (20 mm graded aggregate) for surface channel and drain complete all as specified and directed.

M & L for providing plain cement concrete type B-1, 1:2:4 (using 20 mm graded crushed stone aggregate) as in in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed .

M & L Pre-cast cement concrete block masonry with solid blocks Type C1 1:3:6 (20mm graded aggregate) exc 10 cm in width and setting in cement mortar 1:4 complete all as specfied.

M & L providing precast cement concrete 1:2:4 type B1(20mm graded aggregate) as in cover slab for manholes, landing etc. setting in cement mortar 1:6 complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement complete all as specified and directed. concrete, using extra cement, including forms, moulds, mi-tred/stopped ends etc. complete all as specified and as directed.

M&L for brick work using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar (1:6) complete all as specified and as directed.

M & L for repair to continuous brick edging with width equal to the width of the brick, of whole sub-class 'B' bricks, laid dry on end vertically including all necessary earth work/ removal of old damaged brick edging complete all as specified and as directed.

S & F MS framed work such as grills, gratings, etc., with end of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe 190-0 or Fe-165-0 complete all as specified and as directed.

S & F M.S. TMT bars 10mmdia and over, cut to length,bent in shape required, including cranking bending hooks ends and binding with M.S.wire (annealed) not less then 0.9mm dia complete all as specified and as directed.

S&F rolled mild steel of grade Fe-410 (Gde E-250) quaity B for joist, channel, angle or tee sections, fixed independently without connecting plates etc complete all as specified and directed.

M&L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed.

M & L 75mm thick PCC 1:4:8 type D2 using 40mm grade agg for sub base, etc complete all as specified and as directed.

M & L for 100 mm PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base/ mass cncrete complete all as specified and as directed.

M & L 100mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in path, road, hardstanding, etc. complete all as specified and as directed.

M&L Precast concrete interlocking paver block rubber moulded any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment complete all as specified and as directed.

M & L for machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 80 mm thickness M-40 Grade complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 incuding addition thickness is provided as floating/settng coat complete all as specified ad and directed.

M&L for rendering 15mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed

Taking down cement plaster of any description on brick or stone walls, etc. including racking out joints, hacking for key, scrubbing down with water etc.&removing rubbish to a disance not exc 250m Complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M & L for newly painting to steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described with two coats of synthetic enamel paint over a coat of red oxide primer including preparation of surfaces complete all as specified and directed.

M & L for Soling (or sub base) with broken boulders or quarried stone, inter stices filled, surface formed and rolled and consolidated to required gradient and camber, spread thickness 200mm complete all as specified and as directed.

M & L for preparing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc. complete all as specified and directed

M & L for applying evenly a priming/tack coat with bituminous primer (Paving bitumen) VG -10 @ 10 Kg per 10 Sqm on unsurfaced water bound macadam including preparing surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. complete all as specified and directed.

M & L for applying evenly a priming/ tack coat with bituminous primer (Paving bitumen) VG -10 @ 5 Kg per 10 Sqm on existing black top surface complete all as specified and as directed.

M & L for rolling and consolidation of formation surface with 0.2 to 0.5 tonne hand roller, including filling in soft spots depression etc. which occur during rolling (for portion coming in cutting/ original ground only) to required camber and gradient etc. including watering before or during rolling, complete all as specified and as directed.

Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area not exc 400 sqm Exc 50 mm and n exc 100 mm deep complete all as specified and as directed.

M & L for repair to potholes any depth not exc 1 sqm each in area including sweeping from dust & mud or water securing sunken surfaces in roads etc cutting around edges to at least 25mm in depth but making good by applying tack coat @ 5kg per 10 sqm (using paving bitumen) putting in premixed bituminous macadam, well rammed and sealed with binder 9.8kg per 10sqm blinded with 0.09cum of stone chippings, 6.3mm size and well rammed (including supply of premixed macadam, binder and chippings) depth of potholes exc 30mm complete all as specified and as directed

M & L for premix bituminous macadam laid/ rolled and compacted to required gradient and camber with Paving bitumen VG-30 content of 4% by weight of total mix (consolidated thickness 75 mm or less) for correction of undulation / camber complete all as specified and as directed.

M&L For Semi Dense Bituminous premix asphaltic dense concrete 30mm consolidated thickness with 5.5% binder content of VG-30 by weight of total mix, rolled and compacted to required camber and gradient complete all as specified and as directed.

M & L for Cement concrete work in pavement/hard-standing of flexural strength 40kg/per square Centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less complete all as specified and directed.

M & L Forming 12mm expansion joint and filled with performed bituminous filler and top 30mm primed & sealed with sealing compound grade 'A' in concrete of thickness 150mm complete all as specified and as directed.

M&L for Forming 12 mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘B’ complete all as specified and as directed.

M & L Forming contraction (Dummy) joints 65 mm deep X 10 mm wide filled with sealing compound Gde A complete all as specified and as directed.

M&L for Forming Construction joint 30mm deep X 10mm wide filled with sealing compound complete all as specified and directed

M&L for finishing surface of concrete roads, pavements by brooming complete all as specified and as directed.

Demolition of Brickwork or stone/boulder masonary, built-in cement/ lime mortar including quoins, arches, pillars etc but excluding ashlar tracings, dressed stonework and precast concrete arches complete all as specified and as directed.

Demolition of cement concrete unreinforced in ground floors and paving n.exc 15cm thickness (below or ground level) complete all as specified and directed

Demolition of Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position including reinforcement cut as required to facilitate demolition complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and as directed.

Supply and fixing metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed. Make :- 3M / Dark eye/ Pioneer swift

Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and including MS stud of suitable size as per manufactures instructions complete all as specified and directed. Make :- 3M / Dark eye/ Pioneer swift

M & L for manufacturing, supplying and fixing retro reflective overhead informatory road signage and boards, (Size 1.2 x 0.9 mtr) made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM?D-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-in-charge. Note :- Structural frame work including M.S. plate to be measured and paid separately under relevant item of this schedule. Rectangular area of the sheet only shall be paid under this item).

Supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. complete all as specified and as directed. Make :- 3M / Dark eye/ Pioneer swift

M & L for laying hot applied thermoplastic compound (paint) 2.5 mm thick including reflecting glass beads including cost of all materials, labour, machinery, T&P etc. required for proper completion of work including all other charges. The finished surfaces to be level, uniform and free from streaks and holes as per MORTH specification No. 803 as per IRC, painting lines, dashes, arrows, letters etc. on roads, pavements and the like exc. 10 cm wide with road marking paint, white or golden yellow all as specified.

SS Construction Co (BID ID -3351019)

aditya construction (BID ID -3357656)