REPAIRS TO INTERNAL ELECTRIFICATION WORK INCLUDING SUBMAIN WIRING, MCB DB AND OTHER CONNECTED WORKS AT CERTAIN BUILDINGS FOR RR AT SHARIFABAD UNDER AGE (I) CIF (K).

Amount

Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete with fittings and fixtures such as switches, ceiling roses, pendants, regulators, socket, lamp holders, brackets, bulk head fittings etc removing material to store for keeping in safe custody or for taking credit ( credit for above items shall be made as per conditions separately ) and also making good disturbed surfaces of wall, floors etc all as specified and as directed by the Engineer-in-Charge.

Point wiring with 1.5 Sqmm copper conductor (Multi-stranded) PVC insulated and unsheathed FRLS electric cable 1100 volts grade into and including PVC casing caping/conduit of suitable size (as per conductor run) with all fittings/accessories and including PVC insulated electric cable 1100 volts 1.5 Sqmm ( multi-stranded) copper conductor single core ( Green colour) cable as continuous earth wire connected to common earth dolly including sunk sheet steel terminal box made out of 1.6 mm thick MS sheet concealed in wall or on surface as per site requirement and making good disturbed surface of wall, covered with 3 mm thick plastic laminated sheet ( Make: Hylum) for one light point/fan point/exhaust fan/ bell point etc controlled by one, one way switch complete all as specified and as directed by the Engineer-in-Charge.

All as per item No. 2 here-in-before, but for one light point controlled by 2 two way switches, complete all as specified and as directed by the Engineer-in-Charge.

All as per item No. 2 here-in-before, but for one 3 pin socket outlet 5 Amp on the independent board complete all as specified and as directed by the Engineer-in-Charge.

All as per item No. 2 here-in-before, but for one 3 pin socket outlet 5 Amp on the same board with other switches with cables 1.5 Sqmm size, complete all as specified and as directed by the Engineer-in-Charge.

All as per item No. 2 here-in-before, but for one bell/buzzer point controlled by one bell switch on the independent board complete all as specified and as directed by the Engineer-in-Charge.

All as per serial item No. 2 here-in-before, but for one socket outlet 15 Amps on independent board with 2.5 Sqmm copper conductor ( Multi-stranded) PVC insulated and unsheating electric cable 1100 volts (ISI Marked) including PVC insulated and unsheathed electric cable 1100 volts 2.5 Sqmm copper stranded conductor as continuous earth wire connected to common earth dolly complete all as specified and as directed by Engineer-in-Charge.

Sheet metal enclosure factory made double door shutter type for DB’s TPN, 440 Volts, horizontal type, 4 ways with 200 Amps rated bus bar, neutral link complete all as specified and as directed by the Engr-in-charge including taking out old DB's and making good disturbed surfaces, complete all as specified.

Sheet metal enclosure factory made double door shutter type for DB’s SPN 240 Volts Single Pole and Neutral 12 way with 200 Amps rated bus bar neutral link complete all as specified and as directed by the Engr-in-charge including taking out old DB's and making good disturbed surfaces, complete all as specified.

Sheet metal enclosure factory made double door shutter type for DB’s SPN 240 Volts Single Pole and Neutral 8 way with 200 Amps rated bus bar neutral link complete all as specified and as directed by the Engr-in-charge including taking out old DB's and making good disturbed surfaces, complete all as specified.

Sheet metal enclosure factory made double door shutter type for DB’s SPN 240 Volts Single Pole and Neutral 4 way with 200 Amps rated bus bar neutral link complete all as specified and as directed by the Engr-in-charge including taking out old DB's and making good disturbed surfaces, complete all as specified.

Sheet metal enclosure factory made single door shutter type for DB’s SPN 240 Volts Single Pole and Neutral 2 way with 200 Amps rated bus bar neutral link complete all as specified and as directed by the Engr-in-charge including taking out old DB's and making good disturbed surfaces, complete all as specified.

Refixing old serviceable MCB (SP/SPN/TPN)/MCCB of any rating and type retreived from item No.8 to 12 with new thimbles/lugs of suitable size complete all as specified and as directed by the Engr-in-Charge.

MCB SPN 40 to 63 Amps, 10 KA, 240 Volts, including taking down old existing, complete all as specified.

MCB SPN 32 Amps, 10 KA, 240 Volts, including taking down old existing, complete all as specified.

MCB single pole 05 to 32 Amps, 240 volts, 10 KA, including taking down old existing, complete all as specified.

Switch piano flush button single pole one way 5 Amps, complete all as specified.

Switch piano flush button two way 5 Amps, complete all as specified.

Socket outlet 2 in 1, 3 pin, 5 Amp flush type, complete all as specified.

Switch socket combination 5 in 1, 5 Amp and 15 Amp flush type, complete all as specified.

Bell push switch flush button single pole one way, 5 amps, complete all as specified.

Call bell Ding-Dong AC, 230 Volts single pole, complete all as specified.

Ceiling rose surface type, 65 mm x 50 mm two to three terminals/PVC/polycarbonate, isolated body fixed on PVC block, complete all specified.

Electronic fan regulator flush mounting step type 300-400 Watts, complete all specified.

36 Watt LED Light fitting 2ft x 2ft recess mounting ceiling light fitting flush to ceiling Aura I pairs super bright LED's with highly efficient light-smoothing optics to deliver superior illumination and energy savings year after year with LED tube light and connecting using suitable wire complete all as specified and directed including taking down old unserviceable. Make : Crompton Cat Part No.LCPL-36-CDL (2 X 2) or equivalent in Wipro/Havells/Bajaj/Philips/Syska.

LED Decorative ultra slim round profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use 18 watt LED 6000K with LED tube light and connecting using suitable wire complete including taking down old one, all as specified and as directed at site. Make :- Havells Cat Part No.LHEXBLP7PN1W018/Syska model No SSK-RA1801 or equivalent in Bajaj/ Crompton/Phillips/Wipro.

Angular type Lamp holder PVC polycarbonate type with back plate and providing LED 9 Watt lamp complete including taking down old one all as specified and as directed at site. Make:- Crompton Cat Part No. LED-9WDF/CDL-BI or equivalent in Bajaj/Havells/Philips/Syska/Wipro.

LED lamp 9 watt capacity E-14/E-27 including taking down old, complete all as specified and directed. Make :- Havells/Bajaj/Havells/Philips/Syska/Wipro/Crompton.

LED Decorative ultra slim round profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use 09 watt LED 6000K with LED tube light and connecting using suitable wire complete including taking down old one, all as specified and as directed at site. Make :- Havells Cat Part No.HEXBLP7IN1W009 or equivalent in Bajaj/Syska/Crompton/Phillips/Wipro.

LED recess mounted hueblom light 6 watt pressure die cast aluminium luminaire powder coated white finish in square profile with optimized heat sink for efficient heat dissipation and seperate replaceable electronic driver, Lamp type 6 watt LED 6K with LED tube light and connecting using suitable wire complete including taking down old one, all as specified and as directed at site. Make :- Havells/Bajaj/Syska/Crompton/Phillips/Wipro.

LED recess mounted LED light fitting 10/12 watt, 6000 K, round type, aesthetically designed recessed mounted panel in a light weight plastic body with LED and connecting using suitable wire complete including taking down old one, all as specified and as directed at site. Make :- Havells Cat Part No.LHEBFCP7IZ1W012 or equivalent in Bajaj/Syska/Crompton/Phillips/Wipro.

Endura DL NEO 15 watt (low depth) recess mounted pressure die-cast aluminium luminaire powder coated white finish in round profile with optimized heat sink for efficient heat dissipation and separate replaceable electronic driver complete with lamp type 15 Watt LED 6K including taking down old fitting, complete all as specified and directed. Make :- Havells Cat Part No. LHEBJNP7IN1W015 or equivalent in Bajaj/Havells/Philips/Syska/Wipro.

LED recess mounted LED light fitting 18 watt, 6000 K, round type, aesthetically designed recessed mounted panel in a light weight plastic body with LED and connecting using suitable wire complete including taking down old one, all as specified and as directed at site. Make :- Havells Cat Part No.LHEBFCP7IZ1W018 or equivalent in Bajaj/Syska/Crompton/Phillips/Wipro.

LED recess mounted LED light fitting 18 watt, 6000 K, square type, aesthetically designed recessed mounted panel in a light weight plastic body with LED and connecting using suitable wire complete including taking down old one, all as specified and as directed at site. Make :- Havells Cat Part No.LHEBGAP7IZ1W018 or equivalent in Bajaj/Syska/Crompton/Phillips/Wipro.

Supply and replacement of Busbar chamber 4 pole, 440 volts, 63 Amps rating capacity in metallic body weather proof, rust proof, dust proof complete all as specified and directed. Make :- Havells/ABB/L&T/Hensel/Siemens/Schneider/Tricolite.

Supply and replacement of Busbar chamber 4 pole, 440 volts, 100 Amps rating capacity in metallic body weather proof, rust proof, dust proof complete all as specified and directed. Make :- Havells/ABB/L&T/Hensel/Siemens/Schneider/Tricolite/Legrand.

Supply and replacement of MCCB Sheet metal enclouser 4 pole, 440 volts suitable upto 100 Amps rating capacity as per requirement weather proof, rust proof, dust proof complete all as specified and directed. Make :- Havells/ABB/L&T/Hensel/Siemens/Schneider/Tricolite/Legrand.

Supply and replacement of MCCB 4 pole, 440 volts, 100 Amp rating capacity in 16 KA complete all as directed.

Repairs of existing sheet metal box cover of size not exceeding 1.2 mtr x 1.0 mtr x 0.2 mtr recessed in wall at stair case of buildings or fixed at any place as directed by Engr-in-Charge complete with welding/soldering with hinge for fixing front door MS cover as per original existing cover for housing of distribution switch gear (MCCB enclosure with MCCB, MCB DB with MCB, Main Switch or Busbar chamber) including denting and painting with smoke grey colour of box with both side of the door cover complete all as directed.

Supply and replacement of MS sheet cover 2 mm thick at required feeder box/sheet metal enclosure box cover in any shape and size not exceeding 1.2 Mtr x 1.0 Mtr x 0.2 Mtr including painting complete all as specified and directed.

Sub main wiring using two single core PVC insulated and unsheathed cable with 6 Sqmm FRLS, multistrand copper conductor drawing in casing caping, with 6 Sqmm PVC unsheathed copper conductor cable multistrand as in earth wire system, including taking down existing wiring complete all as specified and as directed. Note :- Two runs of 6 sqmm cable, one run of cable 6 sqmm and one run of PVC caping/caping shall be considered as one unit.

Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for laying of cable and foundation of poles, stays and getting out in any type of soil, all as specified.

Returning filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick each layer in any type of soil complete all as specified and as directed by Engineer-in-Charge.

Removing surplus excavated material to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete, all as specified and as directed by Engineer-in-Charge.

Sand cushioning to underground cables complete all as specified in clause 19.75 of SSR Part-I laid before and after laying of cables, complete all as specified. Note :- Punned thickness shall be measured for payment purpose.

Sub class B bricks, old size, brick covering laid dry, flat transversally along the length of cable on sand cushioning, with width equal to the length of the brick complete all as specified and directed.

GI tubing light grade of size 50mm with all fittings and fixed complete to walls, ceiling or laid in floor for cable crossing including cutting of bitumen roads/PCC and making good after laying of cable complete all as specified and directed by Engr-in-Charge including dismantling old unseviceable.

Supply, laying, jointing, fixing or passing through pipe, trenches or ducts, commissioning and testing XLPE insulated screened and PVC sheathed armoured electric power LT cable heavy duty with aluminium conductor nominal cross sectional area 25 Sqmm 4 core for working voltage upto including 1100 volts confirming to IS-7098 (Part-I) 1988, complete all as specified and as directed including taking down old unserviceable. Note :- Earth work, brick protection and sand cushioning shall be paid and measured seperately.

Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6.0mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 Metres below normal ground level, connecting to the Galvanised iron earth lead wire 4mm dia, by means of bolts, nuts, check nuts and washers of galvanised iron and 4mm earth lead protected by provision of GI medium grade pipe 15mm bore including provision of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone aggregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4Kg/Sqm) and frame of angle iron 25 x 25 x 6mm with lugs 02 Nos and with 6mm dia MS bar handle made to shape, GI medium grade 20mm bore pipe for watering perforated at bottom 1.75 metre long placed on top edge of earth plate, common salt and charcoal filling, test point made out of funnel, wire mesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding 50 metres, all as per electrical plate No 3 of SSR-2009 Part-I and connecting to earth test point including testing on completion all as specified and directed by the Engineer-in-charge including dismantling old earthing. General Note:- Credit schedule has been given separately under tender documents and shall be adjusted in general summary by the deptt. for arriving at net contract sum.

M/S SUHEEL CONSTRUCTIONS

M/S BASHIR AND SONS