NIT No-34/PHE(EM)/BMC (1st Call) Dated-02/03/2026

Particulars

Supply of 1.1 kv grade 4 core x 10 sqmm XLPE Aluminium conductor armoured cable, grade conforming IS : 7098 (Pat - I) 1988 with up to date amendments (Havelles/Mescab/Glostar make)

Supply of 1.1 kv grade 4 core x 16 sqmm XLPE Aluminium conductor armoured cable, grade conforming IS : 7098 (Pat - I) 1988 with up to date amendments (Havelles/Mescab/Glostar make)

Supply of 1.1 kv grade 3.5 core x 35 sqmm XLPE Aluminium conductor armoured cable, grade conforming IS : 7098 (Pat - I) 1988 with up to date amendments (Havelles/Mescab/Glostar make)

Micro-tunneling across road including supply of HDPE Pipe for 4 core 16 sq. mm. PVC armoured cable & laying of cable through HDPE pipe by jack push method.

Laying only Cable upto 50 sqmm through existing RCC/Hume/ GI Pipe/open masonary trench for 4 core.

Only laying up to 35 sq.mm. one no. cable in under ground trench of suitable average depth with brick protection on the top of the cable with 8(eight) nos. brick per mtr. Incl. filling the space between the brick & cable & also the trench with sifted soil leveling up & restoring surface duly rammed.

Supplying & laying interlocking designer paver block of any shade and of approved quality as per IS: 1237-1980 laid in pattern as directed in pavement, footpath, driveway, etcincluding necessary underlay complete in all respect with all labour and material.[Border concrete if necessary to be paid separately].(b) 40 mm thick block (over 150 mm medium sand bed including cost of sand but excluding cost of earthwork in excavation or dismantling of existing hard surface if necessary)(ii) Coloured Decorative.

S & F of Sintex SMC/ FRP water proof type looping cable box on newly erected pole size 240 x 130 x 95 mm depth having hinged front cover & Kit Kat fuse unit one no. N.L. on insulator, 1 no. 4-way bakelite connector for 2 nos. compression brass gland for up to 3-core 16 sq mm PVC/ Al. cable and having lined with rubber gasket front cover with brass machine screw etc. earthing terminal with lug on steel tubuler pole near base including supply & fixing of clamps with bolts & nuts etc. complete in all respect as per direction of E.I.C.

Supplying and fixing compression type gland complete with brassgland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC following armoured cables. a) 4 core x 10 sqmm.

b) 4 core x 16 sqmm

c) 3.5 core x 35 sqmm.

Finishing the end of cable by crimping method incl. S & F solderless Socket, tapes & jointing materials for following.PVC Al. armoured cable. a) 4 core x 10 sqmm.

b) 4 core x 16 sqmm.

c) 3.5 core x 35 sqmm

Supply and fixing of 150 Watt LED Street light high-quality integrated of pressure die-cast aluminium ingress protection IP66 potted driver not a printed circuit board without casing, mounted inside the luminaire.

Supply and fixing of Green line V2 street light (115 Watt) complite with all accessories to be fixed / project from the wall of the building or on pole incl making hole / providing cka mping arrengement and necy GI reducer as required S & F 40 mm Dia GI pipe (ISI Medium ) quality 1.5 Mtr. Average length of 1.5 sqmm PVC insulated single core standerd annealed copper wire and making connection as required and mandling good damages to wall including paintings etc. make- Philips, Havells, Crompton, Benlo.

Supply and fixing of smart bright essistial street light (70 Watt ) complite with all accessories to be fixed /project from the wall of the building or on pole incl making hole /providing ckamping arrangement and necy GI pipe (ISI Medium) quality 1.5 mtr aversage length of 1.5 sqmm PVC insulated single core starandard annealed cooper wire and making connection as required and mending good damages to wall incl painting etc.

Supplying of Auto Street light Control unit (TVC Make type-LS-1) causing of one, one no time switch (Type T/TSQ, L&T make) suitable to switch on and off one 32 Amps LT or BCH make contact on load, one no. 5 A switch for manual operation the contact one no. side lock fuse to control circuit, assemble on a suitable chassis and housed in a 14 SWG 14 ” x 12” x 6’’ (0.35 x 0.35 x 0.15 mtr ) M.S. box with locking arrangement from both inside and outside. The unit should be suitable for pole mounting wall mounting and of outdoor type.