Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹12.6 Cr
EMD Value
₹12.6 L
Closing Date
26 Oct 2023, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
NBCC Bhawan
NBCC Bhawan
Construction of Balance work of Library with Livelihood Hall and Knowledge Hub at Talcher, Odisha
NBCC/SBG/OD/CG/NIT/23-24/009~EWccc502c9f6431279593f4c31
NBCC/SBG/OD/CG/NIT/23-24/009
Open Tender-Domestic
Civil Works General
NBCC Bhawan
₹11,800
₹12.6 L
26 Oct 2023
11 Oct 2023
26 Oct 2023
11 Oct 2023
26 Oct 2023
and royalties, loading and unloading, including cost of all labour,
sundries ,T & P etc. All complete as per directions of the Engineer -in-
Providing and laying of Cement Concrete of grade 1: 4 :8 (1cement : 4 sand :
8 graded stone aggregate 40 mm nominal size ) of approved quality from
quarry mixing in concrete mixer ,lowering and compacting in proper
2 thickness , watering & curing for the required period .including all cost of Cum 76.00 4552.32 3,45,976.47
labour ,material,conveyance,royalties and taxes ,sundries ,T & P etc. but
excluding the cost of centering and shuttering all complete as per the
directions of Engineer-in-charge.
Providing and laying of Cement Concrete of grade 1:2:4 (1 cement: 2 sand: 4
stone aggregate 12mm nominal size) of approved quality from quarry
mixing in concrete mixer ,lowering and compacting in proper thickness ,
3 watering & curing for the required period .including the cost of centering and Cum 111.80 6456.02 7,21,782.59
shuttering, cost of labour, material,conveyance,royalties and taxes ,sundries
,T & P etc. but excluding the cost of centering and shuttering all complete as
per the directions of Engineer-in-charge.
First class Fly ash Brick masonry using bricks of size 25 cm. x 12 cm. x 8
cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement
mortar of mix( 1:6) with ordinary Portland slag cement(PSC) and screened &
washed sand for mortar after immersing the bricks for 6 (Six) hours in water
before use in Foundation & Plinth including splays cutting, circular
moulding, corbelling, chamfering and similar such type of works, watering
and curing etc. including cost, conveyance, loading, unloading, royalties and
taxes of all materials, cost of all labour, scaffolding, sundries, T&P required
for the works etc. complete in all respect as directed by the Engineer-in-
First class Fly ash Brick masonry using bricks of size 25 cm. x 12 cm. x 8
cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement
mortar of mix( 1:6) with ordinary Portland slag cement(PSC) and screened &
washed sand for mortar after immersing the bricks for 6 (Six) hours in water
5 before use in Super Structure including splays cutting, circular moulding,
corbelling, chamfering and similar such type of works, watering and curing
etc. including cost, conveyance, loading, unloading, royalties and taxes of all
materials, cost of all labour, scaffolding, sundries, T&P required for the
works etc. complete in all respect as directed by the Engineer-in-Charge.
i Ground floor Cum 20.00 4789.62 95,792.40
ii First floor Cum 20.00 5098.66 1,01,973.24
iii Second floor Cum 20.00 5453.96 1,09,079.20
iv Third floor Cum 20.00 5862.59 1,17,251.88
v Fourth floor Cum 10.00 6332.47 63,324.70
vi Terrace floor Cum 18.95 6872.91 1,30,241.64
Fly ash Brick masonry using bricks of size 25 cm. x 12 cm. x 8 cm. having
crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix(
1:4) with ordinary Portland slag cement(PSC) and screened & washed sand
for mortar after immersing the bricks for 4 (Six) hours in water before use in
6 Super Structure including splays cutting, circular moulding, corbelling,
chamfering and similar such type of works, watering and curing etc. including
cost, conveyance, loading, unloading, royalties and taxes of all materials, cost
of all labour, scaffolding, sundries, T&P required for the works etc. complete
in all respect as directed by the Engineer-in-Charge.
i Ground floor sqmt 5.00 5004.50 25,022.49
ii First floor sqmt 5.00 5313.54 26,567.70
iii Second floor sqmt 5.00 5668.84 28,344.19
iv Third floor sqmt 5.00 6077.47 30,387.36
v Fourth floor sqmt 5.00 6547.47 32,737.33
Digitally signed by Rakesh
BALANCE WORK FOR CONSTRUCTION OF LIBRARY WITH LIVELIHOOD HALL AND KNOWLEDGE HUB AT TALCHER
Sl.No. DESCRIPTION OF ITEM UNIT QNTY RATE Rs. AMOUNT Rs.
Providing, lifting, hoisting and laying Reinforced cement concrete of M-25
grade as per approved designs and drawings having a minimum compressive
strength (in work test) 250 Kg. / Square cm. in 15 cm. cubes at 28 days after
mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20
mm. size black hard crushed broken granite stone chips and screened and
washed sharp sand for mortar of approved quality from approved quarry,
washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in
concrete mixture with Portland slag cement (PSC) including hoisting,
lowering, laying and compaction concrete by using vibrators, watering and
curing for 28 days, centering and shuttering then after dismantling and
removing debris from the work site and finishing the exposed surface smooth
providing grooves or beads wherever necessary including cost, conveyance,
loading, unloading, royalties and taxes of all materials and cost of all labours,
sundries, T & P required of the work etc. complete in all respect as directed
by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods
or Tor steel and binding wires and labour charges for straightening, cutting,
bending etc. of M.S. rods or tor steel tying the grills and placing in proper
a Ground floor
ii b) Column up to plinth Cum 15.00 12435.08 1,86,526.14
iii c) Plinth Beam at level 0.6 mt Cum 10.00 6111.81 61,118.10
iv d) Plinth Beam at level 2.7 mt Cum 38.60 6111.81 2,35,915.87
v e) Column above plinth Cum 22.00 12435.08 2,73,571.67
ix i) Retaining wall Cum 27.00 12435.08 3,35,747.05
c Second floor
e fourth floor
f Terrace floor
iii d) Roof Beam Cum 2.50 23426.78 58,566.94
Cutting, straightening coiled or bent up M.S. Rod or tor steel including
bending, binding, welding and joining if necessary and tying the grills and
placing in position as required for R.C.C. Work and for providing fan hooks
as required, hoisting, lowering, laying including cost, conveyances, taxes of
M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required
for the work for bending, binding and tying the grills in all floors (Linear
measurement will be taken and quantity will be calculated basing on the
standard weight of B.I.S. for M.S. Rods or tor steel only. Wastage if any,
including weight of binding wire will not be considered for measurement) etc.
complete as per specification & direction of Engineer-in-charge.
i Ground floor Qntl 65.00 9462.77 6,15,080.31
Providing 12mm thick cement plaster to the surface of brick masonry wall
with cement mortar (1:6) including racking out joints, scraping and cleaning
the surface and finishing the plaster surface smooth using wooden floats only
to proper plumbs and level and making grooves and beads to give required
ornamental finish as per drawings including cost of all materials, conveyance,
loading and unloading, all taxes and royalties, all labour, scaffolding,
watering and curing, sundries and T&P etc all complete as per direction of
the Engineer -in-charge
i Ground floor Sqm 250.00 156.70 39,176.00
ii First floor Sqm 250.00 160.60 40,149.50
iii Second floor Sqm 105.00 164.49 17,271.66
iv Third floor Sqm 100.00 168.62 16,862.20
v fourth floor Sqm 100.00 172.75 17,275.20
vi Terrace floor Sqm 250.00 177.12 44,279.50
Digitally signed by Rakesh
BALANCE WORK FOR CONSTRUCTION OF LIBRARY WITH LIVELIHOOD HALL AND KNOWLEDGE HUB AT TALCHER
Sl.No. DESCRIPTION OF ITEM UNIT QNTY RATE Rs. AMOUNT Rs.
Providing 16mm thick cement plaster to the surface of brick masonry wall
with cement mortar (1:6) including racking out joints, scraping and cleaning
the surface and finishing the plaster surface smooth using wooden floats only
to proper plumbs and level and making grooves and beads to give required
ornamental finish as per drawings including cost of all materials, conveyance,
loading and unloading, all taxes and royalties, all labour, scaffolding,
watering and curing, sundries and T&P etc all complete as per direction of
the Engineer -in-charge
i Ground floor Sqm 2780.80 224.67 6,24,767.90
ii First floor Sqm 1400.00 230.34 3,22,470.40
iii Second floor Sqm 230.00 236.24 54,334.28
iv Third floor Sqm 500.26 242.25 1,21,189.99
v fourth floor Sqm 722.27 248.51 1,79,489.87
vi Terrace floor Sqm 163.9800 254.88 41,795.22
Providing 6mm thick cement plaster with cement mortar of (1:4) to ceilings
of roof slabs, stairs, landings, chajja, shelves, columns, beams and lofts etc.
including roughening, scraping and cleaning and finishing the plastered
surface smooth using wooden floats only to proper plumbs and level, making
grooves and beads to give required ornamental finish as per drawings
including cost of all materials, conveyance, loading and unloading, all taxes
and royalties, all labour, scaffolding, watering and curing , sundries and T&P
etc all complete as per direction of the Engineer -in-charge
i Ground floor Sqm 543.31 176.41 95,845.32
ii First floor Sqm 225.00 180.89 40,701.15
iii Second floor Sqm 850.00 185.50 1,57,671.60
iv Third floor Sqm 823.87 190.22 1,56,713.26
v fourth floor Sqm 584.48 195.17 1,14,074.13
vi Terrace floor Sqm 104.92 200.13 20,997.43
Supplying, fitting & fixing of Granite Tiles of 20mm thick of approved make
in floors laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand)
12 and filling joints with slurry including cost of all materials, labour T&P etc.
required for the work all complete incl. rubbing as per direction of the
Engineer-in-charge.
i Ground floor Sqm 58.96 2572.99 1,51,703.49
Supplying, fitting & fixing of Granite Tiles of 10mm. thick of approved
make in dadoes laid on 12 mm thick cement mortar (1:3) (1 cement : 3 course
13 sand) and filling joints with slurry including cost of all materials, labour
T&P etc. required for the work all complete incl. rubbing as per direction of
the Engineer-in-charge.
i Ground floor Sqm 16.80 1881.98 31,617.30
Supplying, fitting & fixing of 22 to 25mm thick GRC flooring tiles in floors
of approved make laid on 20 mm thick cement mortar (1:4) (1 cement : 4
14 course sand) and filling joints with slurry including cost of all materials,
labour T&P etc required for the work all complete as per direction of the
Engineer-in-charge.
Supplying, fitting & fixing of 10 mm thick & size of 600x600 mm
Vitrified floor tiles of matt finish(WOODEN FINISH/RUSTIC FINISH)
with veilcraft (VC ) shield( Scratch free/stain free) with water
absorption limit between 0.08% to 3% and conforming to IS :
15622:2006 (Group B Ib). laid on 20 mm thick cement mortar (1:4) (1
cement : 4 course sand) and filling joints with white cement of approved
quality including cost of all materials, labour T&P etc. required for the work
all complete as per direction of the Engineer-in-charge (for New Work only )
Supplying, fitting & fixing of 10 mm thick & size of 600x600 mm
Vitrified floor tiles of matt finish(WOODEN FINISH/RUSTIC FINISH)
with veilcraft (VC ) shield( Scratch free/stain free) with water
absorption limit between 0.08% to 3% and conforming to IS :
16 15622:2006 (Group B Ib) laid on 12 mm thick cement mortar (1:3) (1
cement : 3 course sand) jointed with slurry mixed with pigment to match the
shades of the tiles etc. complete including cost of all materials, labour T&P
etc. required for the work all complete as per direction of the Engineer-in-
i Ground floor Sqm 105.41 1228.97 1,29,545.73
Digitally signed by Rakesh
BALANCE WORK FOR CONSTRUCTION OF LIBRARY WITH LIVELIHOOD HALL AND KNOWLEDGE HUB AT TALCHER
Sl.No. DESCRIPTION OF ITEM UNIT QNTY RATE Rs. AMOUNT Rs.
Supplying, fitting and fixing of Antiskid Ceramic Floor Tiles in flooring
in toilets using special plain / printed series anti-skid ceramic floor tile of
premium grade (having minimum thickness 7 mm to 8 mm & size 300 mm x
300 mm or 400 mm x 400 mm ) confirming to I.S 13755 of approved quility
and shade on 20mm thick ded of cement morter of mix (1:4) laid in proper
slope and gradient with screened & washed sharp river sand for mortar and
grouted with neat white cement slurry, joining the anti-skid ceramic floor tiles
14 with neat white cement slurry, mixed with required (tiles are to be immersed
in the water for required time before use) quantities of pigments of approved
marks to match the shades of the anti-skid ceramic floor tiles if required
including cost, conveyance, loading, unloading, stacking, royalties of all
material, cost of all labour , sundries, T&P required for the work ,
watering,complete in all respect as per specification excluding GST aas per
specification as directed by Engineer-in-charge.(Note- Sample of tiles shall be
approved before procurement and use.)
i Ground floor Sqm 47.42 791.43 37,529.42
Providing & Fixing tiles of size 20 x 30cm glazed ceramic wall tiles of
premium grade of approved quality and shade having thickness 8mm to
10mm confirming to IS 13755 in dados skirting and risers of steps on 12mm
thick cement plaster (1:3) to proper slope, line and level including cutting to
required size and shape, fixing at corners and splays etc including filling the
15 joints with neat white cement slurry mixed with pigments to match the shade
of the tiles including cost, conveyance,loading,unloading,stacking, royalities
of all materials, cost of all labour,T&P, sundries, watering and curing for the
required period for the work complete in all respect excluding GST as per
specification as directed by Engineer-in-charge.(Note- Sample of tiles shall be
approved before procurement and use.)
i Ground floor Sqm 232.80 863.17 2,00,945.98
Supplying, fitting and fixing in position well seasoned & dressed Sal wood
choukhats in doors free from defects such as dead knots, flows etc. in all
floors including two coats of termite proof wood preservatives to Rear surface
of frames which is in contact with concrete and masonry surface fitted with 6
16 nos. of W.I. Clamps and required screws of approved quality including
cutting legs to sizes, cutting holes in walls, fixing in CC 1:2:4 including cost,
conveyance, royalties and taxes of all materials and cost of all labour,
sundries, T & P etc. required for the workall complete as per the directions of
Engineer -in-charge.
i Ground floor Cum 0.97 61960.86 60,102.03
ii First floor Cum 0.09 61960.86 5,576.48
iii Third floor Cum 0.09 61960.86 5,576.48
iv fourth floor Cum 0.19 61960.86 11,772.56
Supplying fitting and fixing in position 32mm thick single leaf Grade-1
flush door confirming to IS:2202 (part 01/1991) with select seasoned timber
and block board core framed with seasoned hard wood battens and bonded at
high pressure with phonol formaldehyde resin under the cross banding
process, termite resistant and moisture proof, including cost, conveyance,
17 taxes of all materials with 1mm thick laminate of approved make on both
side,1no of Aldrop, 3 nos of SS butt hinges, 2 nos of tower bolt, PVC door
stopper, Buffer & SS handle as per the lay-out drawing and specification
given by the Architect, Including all cost of labour, material, conveyance,
loading, unloading, T&P and painting the wooden surface with an approved
shade and finish etc all complete as per directions of Engineer-in-charge.
i Ground floor Sqm 52.80 4236.44 2,23,683.82
ii First floor Sqm 4.32 4236.44 18,301.40
iii Third floor Sqm 4.32 4236.44 18,301.40
iv fourth floor Sqm 11.52 4236.44 48,803.74
Digitally signed by Rakesh
BALANCE WORK FOR CONSTRUCTION OF LIBRARY WITH LIVELIHOOD HALL AND KNOWLEDGE HUB AT TALCHER
Sl.No. DESCRIPTION OF ITEM UNIT QNTY RATE Rs. AMOUNT Rs.
Factory made FRP( Altematly called GRP) door frame of size 75mm x
100mm fabricated using E - glass chopped strand mat (CSM) U.V stabilised
inopathalic Gel coat and impregnated with inopathalic resin The thickness of
the GRP skins shall not be less then 2.0 mm . The door frame consists of four
segments which are provided with plug in socket arrrangement in-situ-in
mould. The segments are plugged in and are joined together by means of
srew. The GRP frame shall be provided with wooden reinforcement on six
locations for high srew holding capacity for fixing metalic hold fast and shall
18 be consolidated by filling with medium density foam / plaster of paris with
fibre reinforcement , six number of 260mm x 25mm x 5mm size 'S' shaped
M.S flat hold fast shall be provided with the frame. The material and process
for manufacturing the finish of door frame shall conform to RV-TIFAC
composites Design centre's standards and specifications . The finish of door
frame will be plain colour white /Ivory/Beige/Light grey / Golden brown /
Mahogany/ Teak wood /sand stone Champagne/Pastel blue or any other
colour using high quality pigment complete in all respect as per specification
and direction of the Engineer in Charge. etc. complete
Factory made GIRID FRP or called GRP sandwich composite door shutter
of 32mm thick laminated with two GRP skin with good grain finish
fabricated using UV stabilised isoppthalic gel coat and one layer of 450 gsm
E-glass chopped strand mat (CSM) impregnated with ortopathilic resin The
thickness of the skins shall not be less than 1.50mm . Expanded polysryne (
EPS) structural foam panel of 29 mm tickness and a density of 20kg/cu.mts
shall be used as core material wooden reinforcements made of sesasoned sal
wood block of cross section not less than 28mm x 32mm and also necessary
sal wood reinforcements for fitting the metal fittings such as lower bolts
,aldrops, handles etc. shall be provided . A structural adhesive compatible
with (EPS)foam shall be used for bending the core material. the sal wood
reinforcements and the skin The material and process for manufactuing te
door shutter shall conform to RV -TIFAC components design centre's
standards and specification and the door shutters tested in conformation to IS
4020-1998. The Finish of door shutter will be plain colour as per
specification and direction of the Engineer in Charge. etc. complete
Providing and fixing fire resistant door frame of section 35 x 60 mm on
horizontal side & 50 x 60 mm on vertical sides having built in rebate made
out of 1.6 mm thick GI sheet (Zinc coating not less than 120gm/m²) suitable
for mounting 120 min Fire Rated Glazed Door Shutters. The frame shall be
filled with Mineral Wool Insulation having density min 96Kg/m³. The frame
will have a provision of G.I. Anchor fasteners of size M10 x 80 suitable for
fixing in the opening along with Factory made Template for SS Ball Bearing
Hinges of Size 100x89x3mm for fixing of fire rated glazed shutter. The door
shutter would have a top rail and side rail 60 mm x 60 mm and a bottom rail
20 of 110 mm x 60 mm. The glass should be Contraflam Door Lite, 11mm clear
120 min rated (EW 120 & EI 15) Non Wired Toughened Interlayered glass
with a light transmission of 86% and a sound reduction of 38 dB and
manufactured in UL & TUV audited Facility and including UL-EU
Certification. The glass should be compliant to class 1B1 category of Impact
Resistance as per EN 12600. The glass should be held in its place with the
help of 1.6 mm GI beading and a special ceramic tape with cross section of 5
x 20 mm as per the test evidence. The maximum glazing size should be not
more than 1124 mm x 2358 mm (w x h) or 3.19 sq mt in total area or as per
the relevant test certificate. Rate includes Hardware as per Test report
i Ground floor Sqm 9.60 53100.00 5,09,760.00
Digitally signed by Rakesh
BALANCE WORK FOR CONSTRUCTION OF LIBRARY WITH LIVELIHOOD HALL AND KNOWLEDGE HUB AT TALCHER
Sl.No. DESCRIPTION OF ITEM UNIT QNTY RATE Rs. AMOUNT Rs.
Providing & fixing of side hung door of approved make to be fabricated from
roll formed sections made of pre -painted steel (base steel as per IS-513 of
0.60 mm thick "D" qualiyu, galvanised as per IS-277 with zinc of 120
gm/sqm)with total coated thickness of 0.55 mm slide guide section should be
made of o.5 mm stainless steel of 430 grade with paint specification being
with primer of 5-7 microns thick & finished paint with polyster
paint(Black/Pearlwhite/Chocolate brown) of 12-16 microns along with the
alkyd backer at the back of 5-7 microns & sections for external frame bottom
& top should be of 79x45 mm external frame sides should be of 69x24 mm,
guide for top & bottom should be of 69x26 mm ( stainless steel). section for
shutter should be of 26x30 mm, sash bar should be of 23x57 mm
.Accessories/gaskets are to be used as per the manufacturer's supply &
specifiction like gasket will be made of EPDM . All corner brackets for
internal & external are to be made of glass filled nylon. The sections are to be
cut to length, joined & assembled by means of corner bracket &frames are
fixed to the concrete/ masonry walls by means of self expanding screws
&board to be of 50% 9mm pre-laminated board and 50% 9mm glass with
all taxes complete.
i Ground floor Sqm 13.44 6055.76 81,389.41
ii First floor Sqm 20.16 6055.76 1,22,084.12
iii Second floor Sqm 6.72 6055.76 40,694.71
iv Third floor Sqm 20.16 6055.76 1,22,084.12
v fourth floor Sqm 7.20 6055.76 43,601.47
Supplying and installing uPVC- louver made out of lead free green profiles
of KÖMMERLING make with a GREENLINE mark with frame dimension of
58mm x 36mm or 58mm x 52mm x 33mm with corners fusion welded, fully
reinforced with Galvanized steel of 1.2 mm to 2 mm. The louver blades will
be of 3.5mm thickness Pinhead glass mounted on a powder coated aluminium
framework. The physical properties of the profiles like Vicat softening
temperature, density, tensile strength, hardness, weatherability, impact
strength and Modulus of Elasticity should be tested in accordance with
ASTM/DIN-ISO standards and the thermal conductivity as per IS standards.
The profile manufacturer should be a certified member of IGBC and should
have extrusion facility in India and the windows to be assembled and installed
by an authorised fabrication partner . The windows must be installed
complete with all kinds of ironmongery (including EPDM gaskets,bridging
wedges and glass packers) and with suitable water draining system.
Application of Silicon sealant from Inside / Outside of Dowcorning / GE or
i Ground floor Sqm 4.32 8782.76 37,941.51
ii First floor Sqm 2.88 8782.76 25,294.34
iii Second floor Sqm 1.08 8782.76 9,485.38
iv Third floor Sqm 1.44 8782.76 12,647.17
v fourth floor Sqm 1.44 8782.76 12,647.17
Supplying and Fixing of M.S. Grills, M.S.Doors, M.S. Gate etc including
23 cost,conveyance of all materials,priming,and labour for fitting fixing
etc.complete as per the instruction of Engineer-in-Charge
i Ground floor Kg 108.00 73.40 7,926.77
ii First floor Kg 63.00 73.40 4,623.95
iii Second floor Kg 27.00 73.40 1,981.69
iv Third floor Kg 36.00 73.40 2,642.26
v fourth floor Kg 36.00 73.40 2,642.26
vi Terrace floor Kg 126.00 73.40 9,247.90
Priming one coat with wall cement primer (water bound) to make an even
finished surface in all floors and heights to wall surface of approved make
and shade including sand papering, applying putty wherever necessary & cost
of scaffolding, staging charges with cost, conveyance, taxes of all materials,
cost of all labour,labour cess T&P etc. complete as per the direction of the
Engineer-in-charge.
i Ground floor Sqm 4953.21 70.80 3,50,687.27
ii First floor Sqm 3552.81 72.57 2,57,827.42
iii Second floor Sqm 2278.80 74.34 1,69,405.99
iv Third floor Sqm 2062.79 76.11 1,56,998.95
v fourth floor Sqm 1974.94 78.00 1,54,041.37
vi Terrace floor Sqm 473.96 79.89 37,862.77
Digitally signed by Rakesh
BALANCE WORK FOR CONSTRUCTION OF LIBRARY WITH LIVELIHOOD HALL AND KNOWLEDGE HUB AT TALCHER
Sl.No. DESCRIPTION OF ITEM UNIT QNTY RATE Rs. AMOUNT Rs.
Painting two coats with approved anti-fungal weather seal paints (ISI) of
approved colour, shade on wall surface over a coat of wall primer(ISI) water
25 bound including sand papering, polishing the surface, cost, conveyances of all
materials and cost of all labour,labour cess with T&P etc, complete as per
specification & direction of Engineer-in-charge.
i Ground floor Sqm 754.08 87.32 65,846.27
ii First floor Sqm 589.83 90.39 53,313.55
iii Second floor Sqm 767.68 93.57 71,834.89
iv Third floor Sqm 738.66 97.00 71,647.07
v fourth floor Sqm 668.19 100.54 67,177.15
vi Terrace floor Sqm 205.08 104.31 21,392.30
Finishing plastered surfaces of walls with cement based wall putty (Water
based) of approved make and finishing the surface smooth and even by sand
papering to receive painting in walls, at all heights with staging wherever
necessary with cost, conveyance, taxes of all materials, cost of all
labour,labourcess, all T&P etc. required for the work complete in all respect
as per the direction of the Engineer-in-charge.
i Ground floor Sqm 4953.21 77.64 3,84,587.04
ii First floor Sqm 3552.81 77.64 2,75,854.38
iii Second floor Sqm 2278.88 77.64 1,76,941.36
iv Third floor Sqm 2062.79 77.64 1,60,163.27
v fourth floor Sqm 1974.94 77.64 1,53,342.24
vi Terrace floor Sqm 473.96 77.64 36,800.15
Painting two coats with approved plastic emulsion paint over a coat of wall
primer inside surface of walls finished with Acrylic Wall putty (water based)
of make (Birla / JK) and finished smooth & even surface to receive painting
using roller to the final coat including cost of scaffolding staging charges with
cost, conveyances, taxes of all materials, cost of labour, T&P required for the
work etc. complete for all floors as per specification & direction of the
Engineer-in-charge. Note :-
Sample of Paint & Primer shall be approved before procurement and use.
i Ground floor Sqm 4199.13 94.99 3,98,875.36
ii First floor Sqm 2962.98 96.88 2,87,047.58
iii Second floor Sqm 1511.20 98.77 1,49,255.18
iv Third floor Sqm 1324.13 100.65 1,33,278.98
v fourth floor Sqm 1306.75 102.66 1,34,150.96
vi Terrace floor Sqm 268.88 104.78 28,174.32
Painting enamel paint of approved brand and manufacture of required colour
to give an even shade with two or more coats on wood work over a coat of
suitable shade with primer of approved brand as per manufacturer's
specification including cost of all materials with taxes and transportation, all
labour, scaffolding, sundries, T&P etc. All complete as per the direction of
the Engineer -in-charge.
i Ground floor Sqm 36.84 230.10 8,476.88
ii First floor Sqm 64.98 235.76 15,319.94
iii Second floor Sqm 3.48 241.78 841.40
iv Third floor Sqm 3.42 247.92 847.88
v fourth floor Sqm 7.20 254.17 1,830.04
Painting enamel paint of approved brand and manufacture of required colour
to give an even shade with two or more coats on steel work of approved
29 brand as per manufacturer's specification including cost of all materials with
taxes and transportation, all labour, scaffolding, sundries, T&P etc. All
complete as per the direction of the Engineer -in-charge.
i Ground floor Sqm 4.71 161.31 760.07
ii First floor Sqm 2.77 165.32 457.93
iii Second floor Sqm 1.26 169.57 213.65
iv Third floor Sqm 1.08 173.93 187.85
v fourth floor Sqm 0.72 178.30 128.37
vi Terrace floor Sqm 2.52 182.90 460.91
Digitally signed by Rakesh
BALANCE WORK FOR CONSTRUCTION OF LIBRARY WITH LIVELIHOOD HALL AND KNOWLEDGE HUB AT TALCHER
Sl.No. DESCRIPTION OF ITEM UNIT QNTY RATE Rs. AMOUNT Rs.
Supplying, fitting and fixing of Stainless steel of 304 grade in hand ralling
using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm X
32mm X 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size
32mm X 32mm X 2mm in 3 rows in stair case as per approved design and
specification, buffing, polishing etc with cost, conveyance, taxes, all
materials, labour, T&P etc. required for the complete in all respect.
i Ground floor Kg 144.49 341.02 49,273.98
ii First floor Kg 169.61 341.02 57,840.40
iii Second floor Kg 169.61 341.02 57,840.40
iv Third floor Kg 169.61 341.02 57,840.40
v fourth floor Kg 169.61 341.02 57,840.40
Providing average 25mm thick grading Concrete with (1:2:2) using 6mm
black hard granite chips using 2% water proofing cement compound of
approved quality over top of Roof, Terrace, including cost of scaffolding,
scraping and cleaning the roof surface, plastering and finishing smooth to
proper slope and gradient including cost of all materials, conveyance and
sundries, T&P etc. complete as per direction of the Engineer -in-charge.
i Terrace floor Sqm 1645.00 611.59 10,06,072.13
Structural glazing
MS Fabrication and erection work
Supplying, Providing, Fabricating, Assembling, hoisting, erecting and placing
in position MS Built-up section/ Tubular Structure (MS) confirming to
Grade Yst 240-310, Tubular Structure:- made from steel hollow sections,
thickness upto 10mm) in the profile shape as per drawings with special plate
connector, pinion joints, Plates, hollow sections, etc and applying a coat of
enamel primer and paint , and including Preparation of detailed fabrication
and erection drawings of Structural steel work from design drawings issued
by Engineer- in- charge and incorporation of Engineer-in-Charge’s comments
on same, transportation from fabrication yard, cutting, threading, machining,
leads and lifts upto all heights, tools and plants and necessary scaffolding etc.
Semi unitized structural glazing
Design, Fabrication, Supply, All Material & Site Testing, Protection,
Handover of semi unitized four-sided structural glazing Curtain wall
system custom designed to with stand the design wind pressure confirming to
IS -875 part III. (The system must pass the proof test at 1.5 times design wind
pressure without any failure) with microwave cured EPDM gaskets ,
Structural & weather sealants, Open PU cell Spacer tape, backer rod,
Bracketing system with MS hot dip galvanized to accommodate three
dimensional movements with serrated plate and serrated washers, SS 304
grade fasteners & Anchor Fasteners, nylon separators to prevent bi-metallic
contacts, Aluminum trims and flashings to seal the gaps between curtain wall
and the building structure all complete required to perform as per the
36 specification of architect. sqm 5800.00 9612.28 5,57,51,224.00
The system shall be designed of floor height units spanning between the
floors with Dead load & wind load brackets with provision to accommodate
movement at all floor levels and at every grid panels horizontally. The system
shal lbe designed to accommodate 6 mm +12 mm+ 6 mm DGU in vision area
spandrel panel. System shall accommodate openable panel as per
architectural requirement in the system. All fix vision glass and openable
shall look similar in the elevation. Aluminum Edge Guard with Black
Anodized shall be fixed at all vertical & Horizontal grooves. Each glass panel
shall be structurally glazed on the main semi unitized profile system. Each
glass panel shall be supported for dead load at the bottom of glass with black
anodized glass retainers two per panel.
TOTAL AMOUNT OF MUSEUM BUILDING 9,68,66,530.78
TOTAL AMOUNT OF MUSEUM BUILDING 9,68,66,530.78
CIVIL WORKS -SERVICE BUILDING :-
Filling in foundation, trenches and plinth with river sand, well watered and
compacted in layers with top surface dressed and leveled to proper gradient
including cost of all materials, conveyance, all taxes and royalties, loading
and unloading, including cost of all labour, sundries ,T & P etc. All complete
as per directions of the Engineer -in-charge.
Digitally signed by Rakesh
BALANCE WORK FOR CONSTRUCTION OF LIBRARY WITH LIVELIHOOD HALL AND KNOWLEDGE HUB AT TALCHER
Sl.No. DESCRIPTION OF ITEM UNIT QNTY RATE Rs. AMOUNT Rs.
a) Ground Floor Cum 40.03 387.87 15527.25
2 Providing and laying of Cement Concrete of grade 1: 4 :8 (1cement : 4 sand :
8 graded stone aggregate 40 mm nominal size ) of approved quality from
quarry mixing in concrete mixer ,lowering and compacting in proper
thickness , watering & curing for the required period .including all cost of
labour ,material,conveyance,royalties and taxes ,sundries ,T & P etc. but
excluding the cost of centering and shuttering all complete as per the
directions of Engineer-in-charge.
a) Ground Floor Cum 1.50 4552.32 6828.48
3 Providing and laying of Cement Concrete of grade 1:2:4 (1 cement: 2 sand: 4
stone aggregate 12mm nominal size) of approved quality from quarry
mixing in concrete mixer ,lowering and compacting in proper thickness ,
watering & curing for the required period .including the cost of centering and
shuttering, cost of labour, material,conveyance,royalties and taxes ,sundries
,T & P etc. but excluding the cost of centering and shuttering all complete as
per the directions of Engineer-in-charge.
a) Ground Floor Cum 19.88 6456.02 128313.32
4 Fly Ash. brick masonry of size 25 cm. x 12 cm. x 8 cm. having crushing
strength not less than 75 kg. Per Sqr. Cm. in cement mortar of mix (1:6) with
approved grade cement and screened & washed sand for mortar after
immersing the bricks for 6 (Six) hours in water before use in foundation &
plinth including splays cutting, circular moulding, corbelling, chamfering and
similar such type of works, watering and curing etc. including cost,
conveyance, loading, unloading, royalties and taxes of all materials, cost of
all labour, scaffolding, sundries, T&P required for the works etc. complete in
all respect as directed by the Engineer-in-charge
a) Ground Floor Cum 8.15 4744.43 38661.73
8 Fly Ash. brick masonry of size 25 cm. x 12 cm. x 8 cm. having crushing
strength not less than 75 kg. Per Sqr. Cm. in cement mortar of mix (1:6) with
approved grade cement and screened & washed sand for mortar after
immersing the bricks for 6 (Six) hours in water before use in Superstructure
including splays cutting, circular moulding, corbelling, chamfering and
similar such type of works, watering and curing etc. including cost,
conveyance, loading, unloading, royalties and taxes of all materials, cost of
all labour, scaffolding, sundries, T&P required for the works etc. complete in
all respect as directed by the Engineer-in-charge
a) Ground floor Cum 49.47 4789.62 236928.13
9 Providing, lifting, hoisting and laying Reinforced cement concrete of M-25
grade as per approved designs and drawings having a minimum compressive
strength (in work test) 250 Kg. / Square cm. in 15 cm. cubes at 28 days after
mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20
mm. size black hard crushed broken granite stone chips and screened and
washed sharp sand for mortar of approved quality from approved quarry,
washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in
concrete mixture with Portland slag cement (PSC) including hoisting,
lowering, laying and compaction concrete by using vibrators, watering and
curing for 28 days, centering and shuttering then after dismantling and
removing debris from the work site and finishing the exposed surface smooth
providing grooves or beads wherever necessary including cost, conveyance,
loading, unloading, royalties and taxes of all materials and cost of all labours,
sundries, T & P required of the work etc. complete in all respect as directed
by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods
or Tor steel and binding wires and labour charges for straightening, cutting,
bending etc. of M.S. rods or tor steel tying the grills and placing in proper
a) Ground floor
Digitally signed by Rakesh
BALANCE WORK FOR CONSTRUCTION OF LIBRARY WITH LIVELIHOOD HALL AND KNOWLEDGE HUB AT TALCHER
Sl.No. DESCRIPTION OF ITEM UNIT QNTY RATE Rs. AMOUNT Rs.
10 Cutting, straightening coiled or bent up M.S. Rod or tor steel including
bending, binding, welding and joining if necessary and tying the grills and
placing in position as required for R.C.C. Work and for providing fan hooks
as required, hoisting, lowering, laying including cost, conveyances, taxes of
M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required
for the work for bending, binding and tying the grills in all floors (Linear
measurement will be taken and quantity will be calculated basing on the
standard weight of B.I.S. for M.S. Rods or tor steel only. Wastage if any,
including weight of binding wire will not be considered for measurement) etc.
complete as per specification & direction of Engineer-in-charge.
a) Ground floor Qntl 12.00 9462.77 113553.29
Providing 12mm thick cement plaster to the surface of brick masonry wall
with cement mortar (1:6) including racking out joints, scraping and cleaning
the surface and finishing the plaster surface smooth using wooden floats only
to proper plumbs and level and making grooves and beads to give required
ornamental finish as per drawings including cost of all materials, conveyance,
loading and unloading, all taxes and royalties, all labour, scaffolding,
watering and curing, sundries and T&P etc all complete as per direction of
the Engineer -in-charge
a) Ground floor Sqm 193.79 156.70 30367.67
Providing 16mm thick cement plaster to the surface of brick masonry wall
with cement mortar (1:6) including racking out joints, scraping and cleaning
the surface and finishing the plaster surface smooth using wooden floats only
to proper plumbs and level and making grooves and beads to give required
ornamental finish as per drawings including cost of all materials, conveyance,
loading and unloading, all taxes and royalties, all labour, scaffolding,
watering and curing, sundries and T&P etc all complete as per direction of
the Engineer -in-charge
a) Ground floor Sqm 373.89 224.67 84002.61
Providing 6mm thick cement plaster with cement mortar of (1:4) to ceilings
of roof slabs, stairs, landings, chajja, shelves, columns, beams and lofts etc.
including roughening, scraping and cleaning and finishing the plastered
surface smooth using wooden floats only to proper plumbs and level, making
grooves and beads to give required ornamental finish as per drawings
including cost of all materials, conveyance, loading and unloading, all taxes
and royalties, all labour, scaffolding, watering and curing , sundries and T&P
etc all complete as per direction of the Engineer -in-charge
a) Ground floor Sqm 191.17 176.41 33724.30
14 Supplying, fitting & fixing of Granite Tiles of 20mm thick of approved make
in floors laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand)
and filling joints with slurry including cost of all materials, labour T&P etc.
required for the work all complete incl. rubbing as per direction of the
Engineer-in-charge.
a) Ground floor Sqm 11.28 2572.99 29023.33
15 Supplying, fitting & fixing of Granite Tiles of 10mm. thick of approved
make in dadoes laid on 12 mm thick cement mortar (1:3) (1 cement : 3 course
sand) and filling joints with slurry including cost of all materials, labour
T&P etc. required for the work all complete incl. rubbing as per direction of
the Engineer-in-charge.
a) Ground floor Sqm 4.35 1881.98 8186.62
16 Supplying, fitting & fixing of 10 mm thick & size of 600x600 mm
Vitrified floor tiles of matt finish(WOODEN FINISH/RUSTIC FINISH)
with veilcraft (VC ) shield( Scratch free/stain free) with water
absorption limit between 0.08% to 3% and conforming to IS :
15622:2006 (Group B Ib). laid on 20 mm thick cement mortar (1:4) (1
cement : 4 course sand) and filling joints with white cement of approved
quality including cost of all materials, labour T&P etc. required for the work
all complete as per direction of the Engineer-in-charge (for New Work only )
a) Ground floor Sqm 187.93 1112.03 208984.17
Digitally signed by Rakesh
BALANCE WORK FOR CONSTRUCTION OF LIBRARY WITH LIVELIHOOD HALL AND KNOWLEDGE HUB AT TALCHER
Sl.No. DESCRIPTION OF ITEM UNIT QNTY RATE Rs. AMOUNT Rs.
17 Supplying, fitting & fixing of 10 mm thick & size of 600x600 mm
Vitrified floor tiles of matt finish(WOODEN FINISH/RUSTIC FINISH)
with veilcraft (VC ) shield( Scratch free/stain free) with water
absorption limit between 0.08% to 3% and conforming to IS :
15622:2006 (Group B Ib) laid on 12 mm thick cement mortar (1:3) (1
cement : 3 course sand) jointed with slurry mixed with pigment to match the
shades of the tiles etc. complete including cost of all materials, labour T&P
etc. required for the work all complete as per direction of the Engineer-in-
a) Ground floor Sqm 18.52 1228.97 22761.14
Supplying, fitting and fixing in position well seasoned & dressed Sal wood
choukhats in doors free from defects such as dead knots, flows etc. in all
floors including two coats of termite proof wood preservatives to Rear surface
of frames which is in contact with concrete and masonry surface fitted with 6
nos. of W.I. Clamps and required screws of approved quality including
cutting legs to sizes, cutting holes in walls, fixing in CC 1:2:4 including cost,
conveyance, royalties and taxes of all materials and cost of all labour,
sundries, T & P etc. required for the workall complete as per the directions of
Engineer -in-charge.
a) Ground floor Cum 0.19 61960.86 12076.56
19 Supplying fitting and fixing in position 32mm thick single leaf Grade-1
flush door confirming to IS:2202 (part 01/1991) with select seasoned timber
and block board core framed with seasoned hard wood battens and bonded at
high pressure with phonol formaldehyde resin under the cross banding
process, termite resistant and moisture proof, including cost, conveyance,
taxes of all materials with 1mm thick laminate of approved make on both
side,1no of Aldrop, 3 nos of SS butt hinges, 2 nos of tower bolt, PVC door
stopper, Buffer & SS handle as per the lay-out drawing and specification
given by the Architect, Including all cost of labour, material, conveyance,
loading, unloading, T&P and painting the wooden surface with an approved
shade and finish etc all complete as per directions of Engineer-in-charge.
a) Ground floor Sqm 13.32 4236.44 56429.33
20 Supplying and installing UPVC- Sliding windows made out of lead free
green profiles of KÖMMERLING make with a GREENLINE mark having
two tracks and two sashes (shutters) with frame dimension of 58mm x 49mm
and sash dimension of 61mm x 47mm x 37mm for windows with corners
fusion welded, fully reinforced with Galvanized steel of 1.2 mm to 2 mm. The
sash will be fitted with 5/6mm clear glass (float/toughened). The physical
properties of the profiles like Vicat softening temperature, density, tensile
strength, hardness, weatherability, impact strength and Modulus of Elasticity
should be tested in accordance with ASTM/DIN-ISO standards and the
thermal conductivity as per IS standards.The profile manufacturer should be a
certified member of IGBC and should have extrusion facility in India and the
windows to be assembled and installed by an authorised fabrication partner .
The windows must be installed complete with all kinds of ironmongery
(including EPDM gaskets,bridging wedges and glass packers) and with
suitable water draining system. Application of Silicon sealant from Inside /
Outside of Dowcorning / GE or equivalent and all complete as per
architectural drawings and the direction of the Engineer -in- charge.
a) Ground floor Sqm 9.90 9543.93 94484.91
21 Supplying and Fixing of M.S. Grills, M.S.Doors, M.S. Gate etc including
cost,conveyance of all materials,priming,and labour for fitting fixing
etc.complete as per the instruction of Engineer-in-Charge
a) Ground floor Kg 247.50 73.40 18165.51
22 Priming one coat with wall cement primer (water bound) to make an even
finished surface in all floors and heights to wall surface of approved make
and shade including sand papering, applying putty wherever necessary & cost
of scaffolding, staging charges with cost, conveyance, taxes of all materials,
cost of all labour,labour cess T&P etc. complete as per the direction of the
Engineer-in-charge.
a) Ground floor Sqm 758.85 70.80 53726.58
23 Painting two coats with approved anti-fungal weather seal paints (ISI) of
approved colour, shade on wall surface over a coat of wall primer(ISI) water
bound including sand papering, polishing the surface, cost, conveyances of all
materials and cost of all labour,labour cess with T&P etc, complete as per
specification & direction of Engineer-in-charge.
Digitally signed by Rakesh
BALANCE WORK FOR CONSTRUCTION OF LIBRARY WITH LIVELIHOOD HALL AND KNOWLEDGE HUB AT TALCHER
Sl.No. DESCRIPTION OF ITEM UNIT QNTY RATE Rs. AMOUNT Rs.
a) Ground floor Sqm 193.79 87.32 16921.74
24 Finishing plastered surfaces of walls with cement based wall putty (Water
based) of approved make and finishing the surface smooth and even by sand
papering to receive painting in walls, at all heights with staging wherever
necessary with cost, conveyance, taxes of all materials, cost of all
labour,labourcess, all T&P etc. required for the work complete in all respect
as per the direction of the Engineer-in-charge.
a) Ground floor Sqm 758.85 68.79 52204.33
25 Painting two coats with approved plastic emulsion paint over a coat of wall
primer inside surface of walls finished with Acrylic Wall putty (water based)
and finished smooth & even surface to receive painting using roller to the
final coat including cost of scaffolding staging charges with cost,
conveyances, taxes of all materials, cost of labour, T&P required for the work
etc. complete for all floors as per specification & direction of the Engineer-in-
charge. Note :- Sample of
Paint & Primer shall be approved before procurement and use.
a) Ground floor Sqm 565.06 94.99 53675.05
26 Painting enamel paint of approved brand and manufacture of required colour
to give an even shade with two or more coats on wood work over a coat of
suitable shade with primer of approved brand as per manufacturer's
specification including cost of all materials with taxes and transportation, all
labour, scaffolding, sundries, T&P etc. All complete as per the direction of
the Engineer -in-charge.
a) Ground floor Sqm 7.43 230.10 1709.64
27 Painting enamel paint of approved brand and manufacture of required colour
to give an even shade with two or more coats on steel work of approved
brand as per manufacturer's specification including cost of all materials with
taxes and transportation, all labour, scaffolding, sundries, T&P etc. All
complete as per the direction of the Engineer -in-charge.
a) Ground floor Sqm 10.89 161.31 1756.62
28 Supplying, fitting and fixing of Stainless steel of 304 grade in hand ralling
using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm X
32mm X 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size
32mm X 32mm X 2mm in 3 rows in stair case as per approved design and
specification, buffing, polishing etc with cost, conveyance, taxes, all
materials, labour, T&P etc. required for the complete in all respect.
a) Ground floor Kg 76.43 341.02 26064.16
29 Providing average 25mm thick grading Concrete with (1:2:2) using 6mm
black hard granite chips using 2% water proofing cement compound of
approved quality over top of Roof, Terrace, including cost of scaffolding,
scraping and cleaning the roof surface, plastering and finishing smooth to
proper slope and gradient including cost of all materials, conveyance and
sundries, T&P etc. complete as per direction of the Engineer -in-charge.
a) First floor
TOTAL AMOUNT SERVICE BUILDING 1903936.38
TOTAL AMOUNT SERVICE BUILDING 1903936.38
MUSEUM BUILDING
DETAILED ESTIMATE OF CIVIL WORKS OF 8.5KLD SEPTIC
TANK FOR MUSEUM BUILDING
Earth work in excavation by mechanical means (Hydraulic excavator) /
manual means in foundation trenches or drains (not exceeding 1.5 m in width
1 or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift
upto 1.5 m, including getting out the excavated soil and disposal of surplus
excavated soil as directed, within a lead of 50 m.
B) From 1.5M to 3.0M Depth CUM 7.86 237.65 1867.40
Filling at all depth with available excavated earth (excluding rock) in
trenches, plinth, sides of foundations etc. in layers not exceeding 15cm in
depth: consolidating each deposited layer by ramming and watering complete
(lead upto 100m) as directed by the Engineer-In-charge.
Digitally signed by Rakesh
BALANCE WORK FOR CONSTRUCTION OF LIBRARY WITH LIVELIHOOD HALL AND KNOWLEDGE HUB AT TALCHER
Sl.No. DESCRIPTION OF ITEM UNIT QNTY RATE Rs. AMOUNT Rs.
Filling in foundation, trenches and plinth with river sand, well
watered and compacted in layers with top surface dressed and leveled
to proper gradient including cost of all materials, conveyance, all taxes
and royalties, loading and unloading, including cost of all labour,
sundries ,T & P etc. All complete as per directions of the Engineer -in-
Providing and laying of Cement Concrete of grade 1: 4 :8 (1cement : 4 sand :
8 graded stone aggregate 40 mm nominal size ) of approved quality from
quarry mixing in concrete mixer ,lowering and compacting in proper
4 thickness , watering & curing for the required period .including all cost of CUM 1.69 4552.32 7706.97
labour ,material,conveyance,royalties and taxes ,sundries ,T & P etc. but
excluding the cost of centering and shuttering all complete as per the
directions of Engineer-in-charge.
Providing, lifting, hoisting and laying Reinforced cement concrete of M-25
grade as per approved designs and drawings having a minimum compressive
strength (in work test) 250 Kg. / Square cm. in 15 cm. cubes at 28 days after
mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20
mm. size black hard crushed broken granite stone chips and screened and
washed sharp sand for mortar of approved quality from approved quarry,
washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in
concrete mixture with Portland slag cement (PSC) including hoisting,
lowering, laying and compaction concrete by using vibrators, watering and
curing for 28 days, centering and shuttering then after dismantling and
removing debris from the work site and finishing the exposed surface smooth
providing grooves or beads wherever necessary including cost, conveyance,
loading, unloading, royalties and taxes of all materials and cost of all labours,
sundries, T & P required of the work etc. complete in all respect as directed
by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods
or Tor steel and binding wires and labour charges for straightening, cutting,
bending etc. of M.S. rods or tor steel tying the grills and placing in proper
All works upto plinth level
Cutting, straightening coiled or bent up M.S. Rod or tor steel including
bending, binding, welding and joining if necessary and tying the grills and
placing in position as required for R.C.C. Work and for providing fan hooks
as required, hoisting, lowering, laying including cost, conveyances, taxes of
M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required
for the work for bending, binding and tying the grills in all floors (Linear
measurement will be taken and quantity will be calculated basing on the
standard weight of B.I.S. for M.S. Rods or tor steel only. Wastage if any,
including weight of binding wire will not be considered for measurement) etc.
complete as per specification & direction of Engineer-in-charge.
Providing 12mm thick cement plaster to the surface of brick masonry wall
with cement mortar (1:4) including racking out joints, scraping and cleaning
the surface and finishing the plaster surface smooth using wooden floats only
to proper plumbs and level and making grooves and beads to give required
ornamental finish as per drawings including cost of all materials, conveyance,
loading and unloading, all taxes and royalties, all labour, scaffolding,
watering and curing, sundries and T&P etc all complete as per direction of
the Engineer -in-charge
1:4 (1 cement: 4 fine sand) SQM 37.55 170.04 6384.93
Providing cement punning to walls including roughening, scraping
and cleaning and finishing the surface smooth only to proper plumbs
and level, to give required ornamental finish as per drawings including
8 cost of all materials, conveyance, loading and unloading, all taxes and SQM 37.55 27.26 1023.54
royalties, all labour, scaffolding, watering and curing , sundries and
T&P etc all complete as per direction of the Engineer -in-charge
Supplying and fixing 900mm dia SFRC cover without frame for manhole
9 including cost of all materials, T&P, labour etc complete as per direction of NOS 3.00 3398.40 10195.20
Engineer-in-charge.
Digitally signed by Rakesh
BALANCE WORK FOR CONSTRUCTION OF LIBRARY WITH LIVELIHOOD HALL AND KNOWLEDGE HUB AT TALCHER
Sl.No. DESCRIPTION OF ITEM UNIT QNTY RATE Rs. AMOUNT Rs.
2.5 cm thick A.S Flooring in C.C (1:2:4) including punning using 12 mm
10 size C.B hard granite chips with cost of all labour & other materials etc CUM 7.07 327.10 2310.93
SOAK WAY GALLARY - 0.00
Earth work in excavation by mechanical means (Hydraulic excavator) /
manual means in foundation trenches or drains (not exceeding 1.5 m in width
1 or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift 0.00
upto 1.5 m, including getting out the excavated soil and disposal of surplus
excavated soil as directed, within a lead of 50 m.
a Excavation in earth work 0.00
In all kind of soil cum 0.95 236.24 224.24
In hard soil cum 0.41 219.95 89.48
Filling in foundation, trenches and plinth with river sand, well watered and
compacted in layers with top surface dressed and leveled to proper gradient
2 including cost of all materials, conveyance, all taxes and royalties, loading cum 0.11 387.87 42.67
and unloading, including cost of all labour, sundries ,T & P etc. All complete
as per directions of the Engineer -in-charge.
Providing and laying of Cement Concrete of grade 1: 3 :6 (1cement : 3 sand :
6 graded stone aggregate 40 mm nominal size ) of approved quality from
quarry mixing in concrete mixer ,lowering and compacting in proper
3 thickness , watering & curing for the required period .including all cost of 0.00
labour ,material,conveyance,royalties and taxes ,sundries ,T & P etc. but
excluding the cost of centering and shuttering all complete as per the
directions of Engineer-in-charge.
1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal
Brick work with common burnt clay F.P.S. (non modular) bricks of class
designation 7.5 in foundation and plinth in
Cement mortar 1:6 (1 cement : 6 coarse sand) cum 0.80 5519.16 4387.73
Providing, lifting, hoisting and laying Reinforced cement concrete of M-25
grade as per approved designs and drawings having a minimum compressive
strength (in work test) 250 Kg. / Square cm. in 15 cm. cubes at 28 days after
mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20
mm. size black hard crushed broken granite stone chips and screened and
washed sharp sand for mortar of approved quality from approved quarry,
washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in
concrete mixture with Portland slag cement (PSC) including hoisting,
lowering, laying and compaction concrete by using vibrators, watering and
curing for 28 days, centering and shuttering then after dismantling and
removing debris from the work site and finishing the exposed surface smooth
providing grooves or beads wherever necessary including cost, conveyance,
loading, unloading, royalties and taxes of all materials and cost of all labours,
sundries, T & P required of the work etc. complete in all respect as directed
by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods
or Tor steel and binding wires and labour charges for straightening, cutting,
bending etc. of M.S. rods or tor steel tying the grills and placing in proper
Steel reinforcement for R.C.C. work including straightening, cutting, bending,
placing in position and binding all complete upto plinth level.
Thermo-Mechanically Treated bars 0.00
Supply & fixing of well sink with top and bottom cover of min 50 mm thk
with cementing Khoa filling etc as per the direction of Engineer-in-Charge.
2 LAKH + 18 KLD FIRE AND DOMESTIC WATER TANK
Earth work in excavation by mechanical means (Hydraulic excavator) /
manual means in foundation trenches or drains (not exceeding 1.5 m in width
1 or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift
upto 1.5 m, including getting out the excavated soil and disposal of surplus
excavated soil as directed, within a lead of 50 m.
Filling at all depth with available excavated earth (excluding rock) in
trenches, plinth, sides of foundations etc. in layers not exceeding 15cm in
depth: consolidating each deposited layer by ramming and watering complete
(lead upto 100m) as directed by the Engineer-In-charge.
Digitally signed by Rakesh
BALANCE WORK FOR CONSTRUCTION OF LIBRARY WITH LIVELIHOOD HALL AND KNOWLEDGE HUB AT TALCHER
Sl.No. DESCRIPTION OF ITEM UNIT QNTY RATE Rs. AMOUNT Rs.
Filling in foundation, trenches and plinth with river sand, well watered and
compacted in layers with top surface dressed and leveled to proper gradient
3 including cost of all materials, conveyance, all taxes and royalties, loading CUM 8.94 387.87 3466.88
and unloading, including cost of all labour, sundries ,T & P etc. All complete
as per directions of the Engineer -in-charge.
Providing and laying of Cement Concrete of grade 1: 4 :8 (1cement : 4 sand :
8 graded stone aggregate 40 mm nominal size ) of approved quality from
quarry mixing in concrete mixer ,lowering and compacting in proper
4 thickness , watering & curing for the required period .including all cost of CUM 8.94 4552.32 40690.25
labour ,material,conveyance,royalties and taxes ,sundries ,T & P etc. but
excluding the cost of centering and shuttering all complete as per the
directions of Engineer-in-charge.
Providing, lifting, hoisting and laying Reinforced cement concrete of M-25
grade as per approved designs and drawings having a minimum compressive
strength (in work test) 250 Kg. / Square cm. in 15 cm. cubes at 28 days after
mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20
mm. size black hard crushed broken granite stone chips and screened and
washed sharp sand for mortar of approved quality from approved quarry,
washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in
concrete mixture with Portland slag cement (PSC) including hoisting,
lowering, laying and compaction concrete by using vibrators, watering and
curing for 28 days, centering and shuttering then after dismantling and
removing debris from the work site and finishing the exposed surface smooth
providing grooves or beads wherever necessary including cost, conveyance,
loading, unloading, royalties and taxes of all materials and cost of all labours,
sundries, T & P required of the work etc. complete in all respect as directed
by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods
or Tor steel and binding wires and labour charges for straightening, cutting,
bending etc. of M.S. rods or tor steel tying the grills and placing in proper
All works upto plinth level 0.00
Cutting, straightening coiled or bent up M.S. Rod or tor steel including
bending, binding, welding and joining if necessary and tying the grills and
placing in position as required for R.C.C. Work and for providing fan hooks
as required, hoisting, lowering, laying including cost, conveyances, taxes of
M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required
for the work for bending, binding and tying the grills in all floors (Linear
measurement will be taken and quantity will be calculated basing on the
standard weight of B.I.S. for M.S. Rods or tor steel only. Wastage if any,
including weight of binding wire will not be considered for measurement) etc.
complete as per specification & direction of Engineer-in-charge.
Providing 12mm thick cement plaster to the surface of brick masonry wall
with cement mortar (1:4) including racking out joints, scraping and cleaning
the surface and finishing the plaster surface smooth using wooden floats only
to proper plumbs and level and making grooves and beads to give required
ornamental finish as per drawings including cost of all materials, conveyance,
loading and unloading, all taxes and royalties, all labour, scaffolding,
watering and curing, sundries and T&P etc all complete as per direction of
the Engineer -in-charge
Providing cement punning to walls including roughening, scraping
and cleaning and finishing the surface smooth only to proper plumbs
and level, to give required ornamental finish as per drawings including
8 cost of all materials, conveyance, loading and unloading, all taxes and SQM 477.19 27.26 13007.25
royalties, all labour, scaffolding, watering and curing , sundries and
T&P etc all complete as per direction of the Engineer -in-charge
Supplying and fixing 900mm dia SFRC cover without frame for manhole
9 including cost of all materials, T&P, labour etc complete as per direction of NOS 3.00 3398.40 10195.20
Engineer-in-charge.
Digitally signed by Rakesh
BALANCE WORK FOR CONSTRUCTION OF LIBRARY WITH LIVELIHOOD HALL AND KNOWLEDGE HUB AT TALCHER
Sl.No. DESCRIPTION OF ITEM UNIT QNTY RATE Rs. AMOUNT Rs.
2.5 cm thick A.S Flooring in C.C (1:2:4) including punning using 12 mm
10 size C.B hard granite chips with cost of all labour & other materials etc CUM 75.32 327.10 24636.87
GULLY CHAMBER(250X250X250)MM
Earth work in excavation by mechanical means (Hydraulic excavator) /
manual means in foundation trenches or drains (not exceeding 1.5 m in width
1 or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift
upto 1.5 m, including getting out the excavated soil and disposal of surplus
excavated soil as directed, within a lead of 50 m.
A) Upto 1.5 M Depth CUM 2.67 219.95 587.27
B) From 1.5M to 3.0M Depth CUM 0.00 237.65 0.00
Filling at all depth with available excavated earth (excluding rock) in
trenches, plinth, sides of foundations etc. in layers not exceeding 15cm in
depth: consolidating each deposited layer by ramming and watering complete
(lead upto 100m) as directed by the Engineer-In-charge.
Supplying and filling sand in foundation and over areas including watering,
3 ramming, consolidating and dressing, labours, tools, taxes etc. all complete as CUM 0.49 387.87 190.05
per the specification and direction of Engineer-In-Charge.
Providing and laying of Cement Concrete of grade 1: 4 :8 (1cement : 4 sand :
8 graded stone aggregate 40 mm nominal size ) of approved quality from
quarry mixing in concrete mixer ,lowering and compacting in proper
4 thickness , watering & curing for the required period .including all cost of CUM 0.48 4552.32 2185.11
labour ,material,conveyance,royalties and taxes ,sundries ,T & P etc. but
excluding the cost of centering and shuttering all complete as per the
directions of Engineer-in-charge.
Providing and laying in position ready mixed M-25 grade concrete for
reinforced cement concrete work, using cement content as per approved
design mix, manufactured in fully automatic batching plant and transported to
site of work in transit mixer for all leads, having continuous agitated mixer,
manufactured as per mix design of specified grade for reinforced cement
concrete work, including pumping of R.M.C. from transit mixer to site of
5 laying , excluding the cost of centering, shuttering finishing and
reinforcement, including cost of admixtures in recommended proportions as
per IS : 9103 to accelerate/ retard setting of concrete, improve workability
without impairing strength and durability as per direction of the Engineer - in -
(Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less
cement used as per design mix is payable/recoverable separately).
All works upto plinth level
Cutting, straightening coiled or bent up M.S. Rod or tor steel including
bending, binding, welding and joining if necessary and tying the grills and
placing in position as required for R.C.C. Work and for providing fan hooks
as required, hoisting, lowering, laying including cost, conveyances, taxes of
M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required
for the work for bending, binding and tying the grills in all floors (Linear
measurement will be taken and quantity will be calculated basing on the
standard weight of B.I.S. for M.S. Rods or tor steel only. Wastage if any,
including weight of binding wire will not be considered for measurement) etc.
complete as per specification & direction of Engineer-in-charge.
Providing 12mm thick cement plaster to the surface of brick masonry wall
with cement mortar (1:4) including racking out joints, scraping and cleaning
the surface and finishing the plaster surface smooth using wooden floats only
to proper plumbs and level and making grooves and beads to give required
ornamental finish as per drawings including cost of all materials, conveyance,
loading and unloading, all taxes and royalties, all labour, scaffolding,
watering and curing, sundries and T&P etc all complete as per direction of
the Engineer -in-charge
1:4 (1 cement: 4 fine sand) SQM 4.00 170.04 680.15
Digitally signed by Rakesh
BALANCE WORK FOR CONSTRUCTION OF LIBRARY WITH LIVELIHOOD HALL AND KNOWLEDGE HUB AT TALCHER
Sl.No. DESCRIPTION OF ITEM UNIT QNTY RATE Rs. AMOUNT Rs.
Providing cement punning to walls including roughening, scraping
and cleaning and finishing the surface smooth only to proper plumbs
and level, to give required ornamental finish as per drawings including
8 cost of all materials, conveyance, loading and unloading, all taxes and SQM 4.00 27.26 109.03
royalties, all labour, scaffolding, watering and curing , sundries and
T&P etc all complete as per direction of the Engineer -in-charge
2.5 cm thick A.S Flooring in C.C (1:2:4) including punning using 12 mm
10 size C.B hard granite chips with cost of all labour & other materials etc CUM 0.25 327.10 81.77
INSPECTION CHAMBER(750X750X750)MM
Earth work in excavation by mechanical means (Hydraulic excavator) /
manual means in foundation trenches or drains (not exceeding 1.5 m in width
1 or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift
upto 1.5 m, including getting out the excavated soil and disposal of surplus
excavated soil as directed, within a lead of 50 m.
B) From 1.5M to 3.0M Depth CUM 0.00 237.65 0.00
Filling at all depth with available excavated earth (excluding rock) in
trenches, plinth, sides of foundations etc. in layers not exceeding 15cm in
depth: consolidating each deposited layer by ramming and watering complete
(lead upto 100m) as directed by the Engineer-In-charge.
Supplying and filling sand in foundation and over areas including watering,
3 ramming, consolidating and dressing, labours, tools, taxes etc. all complete as CUM 2.56 387.87 992.94
per the specification and direction of Engineer-In-Charge.
Providing and laying plain cement concrete 1:4:8 (1 cement : 4 sand : 8 stone
4 agregate 40mm nominal size) as levelling course in floor and plinth including CUM 2.56 4552.32 11653.94
tempering, curring, shuttering etc. complete all depth and height.
Providing and laying in position ready mixed M-25 grade concrete for
reinforced cement concrete work, using cement content as per approved
design mix, manufactured in fully automatic batching plant and transported to
site of work in transit mixer for all leads, having continuous agitated mixer,
manufactured as per mix design of specified grade for reinforced cement
concrete work, including pumping of R.M.C. from transit mixer to site of
5 laying , excluding the cost of centering, shuttering finishing and
reinforcement, including cost of admixtures in recommended proportions as
per IS : 9103 to accelerate/ retard setting of concrete, improve workability
without impairing strength and durability as per direction of the Engineer - in -
(Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less
cement used as per design mix is payable/recoverable separately).
All works upto plinth level
Cutting, straightening coiled or bent up M.S. Rod or tor steel including
bending, binding, welding and joining if necessary and tying the grills and
placing in position as required for R.C.C. Work and for providing fan hooks
as required, hoisting, lowering, laying including cost, conveyances, taxes of
M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required
for the work for bending, binding and tying the grills in all floors (Linear
measurement will be taken and quantity will be calculated basing on the
standard weight of B.I.S. for M.S. Rods or tor steel only. Wastage if any,
including weight of binding wire will not be considered for measurement) etc.
complete as per specification & direction of Engineer-in-charge.
12mm cement plaster to out side of brick surfaces with cement mortar of mix
7 1:4 (1 cement : 4 fine sand) including necessary scaffolding, curing etc. all
complete at all floors and all heights.
1:4 (1 cement: 4 fine sand) SQM 20.00 170.04 3400.76
Digitally signed by Rakesh
BALANCE WORK FOR CONSTRUCTION OF LIBRARY WITH LIVELIHOOD HALL AND KNOWLEDGE HUB AT TALCHER
Sl.No. DESCRIPTION OF ITEM UNIT QNTY RATE Rs. AMOUNT Rs.
Providing cement punning to walls including roughening, scraping
and cleaning and finishing the surface smooth only to proper plumbs
and level, to give required ornamental finish as per drawings including
8 cost of all materials, conveyance, loading and unloading, all taxes and SQM 20.00 27.26 545.16
royalties, all labour, scaffolding, watering and curing , sundries and
T&P etc all complete as per direction of the Engineer -in-charge
2.5 cm thick A.S Flooring in C.C (1:2:4) including punning using 12 mm
10 size C.B hard granite chips with cost of all labour & other materials etc CUM 5.63 327.10 1839.92
MAN HOLE CHAMBER
Supplying all materials, labour, T&P and constructing circular type man hole
chamber of the following size with cement concrete (1:4:8) using 40mm size
hard granite metal on bed, 1st class Fly ash brickwork in cement mortar (1:5),
moulding and shaping the channel inside and benching with cement concrete
(1:2:4) using 12mm size h.g chips, 12mmthick cement plaster (1:3) with
#REF! punning to inside, 12mm thick cement plaster (1:3) to outside, R.C.C cover
slab in (1:2:4) using 12mm size h.g chips, earthwork in excavation in all kinds
of soil and refilling the cavity around the chamber including watering, curing,
conveyance of all materials to worksite, payment of royalty, taxes etc all
complete as per approved specification and direction of the Engineer in
a Circular MH inside dia 1200mmx1670mm with sides sloped upto560mm NOS 1.00 17591.44 17591.44
EXTERNAL PH WORKS (WATER SUPPLY)
A) Earth work in ordinary soil with initial lead and lift including rough
1 dressing in layers not exceeding 0.3m in depth and the Earth transported by CUM 9.65 219.95 2121.44
transport vehicles as directed by the Engineer-in-charge.
Filling available excavated earth (excluding rock) in trenches, plinth, sides of
2 foundations etc. in layers not exceeding 20cm in depth, consolidating each CUM 6.52 149.36 974.37
deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
Supplying all labour, T&P for the Carriage of excavated earth by
mechanical means of transport within 5.00 K.M. lead including hire and
3 running charges of vehicles, labour charges for loading and unloading as CUM 3.12 236.24 737.42
required for the work etc. complete as per the direction of the Engineer-in-
Supplying all materials, labour, T&P, fitting & fixing of 50mm dia brass /
GM Full way Valve of approved make including supply of all necessary
4 jointing materials such as red lead paint, yarns etc. including cost, conveyance NOS 2.00 4989.39 9978.79
& taxes of all materials, T&P etc. all complete as per P.H. specification and
as per the direction of the EIC.
Providing all materials, labour, T&P for laying/fixing of following dia CPVC
pipes SDR-11 as per IS-15778/2007 with ISI mark including fixing of
required size CPVC fittings like bend, Tee, elbow, offsets etc. and the same
fixed on wall or floor with holder bat clamps screw in all floor or laying in
trenches including excavation of earth work in all kinds of soil & backfilling
the trenches as per specification & testing the joints with required water
presure.The cost inclusive of all taxes,duties,transportation scaffolding etc. as
per specification and direction of Engineer-in-charge.
Providing and fixing C.I. sluice valves (with cap)complete with bolts,nuts,
6 rubber insertions etc. (the tail pieces if required will be paid Separately
a 100mm Dia class II NOS 1.00 7186.20 7186.20
Providing & fixing of CI body non return valve of approved make with
high tensile bress rising stem suitable for the system pressure as per IS 780
Supplying all materials, labour, T&P, fitting & fixing of different size
bourden type pressure gauge of reputed make (0-10 kg/sqcm) with valves,
piping, fitting of approved make including supply of all necessary jointing
materials such as red lead paint, yarns etc. including cost, conveyance & taxes
of all materials, T&P etc. all complete as per P.H. specification and as per the
direction of the Engineer-in-charge. (MR)
Digitally signed by Rakesh
BALANCE WORK FOR CONSTRUCTION OF LIBRARY WITH LIVELIHOOD HALL AND KNOWLEDGE HUB AT TALCHER
Sl.No. DESCRIPTION OF ITEM UNIT QNTY RATE Rs. AMOUNT Rs.
Providing and fixing C.I. double acting air valve of approved quality
9 with bolts, nuts, rubber insertions etc. complete (The tail pieces,
tapers etc if required will be paid separately) :
Supply, installation, testing and commisioning of automatic star delta control
panel suitable for 5 HP pumpset including MS box fitted with main switch
,contactor, single phasing preventer, timer, selector switch, voltmetre,
ammeter etc and connection with motor inside the sump with suitable cable
etc complete as per the Direction of Engineer-in-charge. (Excluding power
Supplying all materials, labour, T&P laying, fitting and fixing of different dia
CI specials confirming IS specification in the pipe line trenches in proper
11 position providing lights, barriers, pegs, thread, end testing the joints etc all
complete but excluding cost of lead joints as per the direction of Engineer-in-
ii 45 Degree Bend NOS 2.00 2212.736 4425.47
iii Socket tail piece NOS 2.00 3615.99 7231.98
Supply, installation, testing and commisioning of vertical submersible pump
set of approved make having discharge 15 m3 per hour and 7-12mtr head
including installation of pump set (2.0 HP) with suitable base plate and
foundation inside the sump, delivery arrangement with suitableUPVC or MS
pipe providing valves fittings etc and connection within 20mtr distance etc
complete as per the Direction of Engineer-in-charge. (MR) @47500/ hp
Providing and fixing all instrumentation such as level switch,level indicators
,flow switch and flow meaters with RS -32 port and instrument panel for the
14 Water pumps electrical controlling devices,field monitors and displays etc LOT 1.00 448400.00 448400.00
and isolation control valves for making the system complete. one set for raw
water feed and the other is for grey warer feed pumps.
Supplying, installing, testing and commissioning of horizontal
single/multistage centrifugal filter feed pump complete in SS. Each pump
shall have TEFC 2900 RPM three phase electric motor. The pump shall have
cast iron head, base plate SS Shaft/ Impeller/ Intermediate chamber. Pump
shall be provided with mechanical seal. The pump shall be suitable for auto/
manual operation. of capacity 5 M3/hr @ 45 MWC.(1 W + 1 St by )
Providing and fixing all instrumentation such as level switch,level indicators
,flow switch and flow meaters port and instrument panel for the electrical
controlling devices,field monitors and displays etc and isolation control
valves for making the system complete. one set for raw water feed to OHT.
17 Water Tank For Fire And Domestic Use
Supplying, installing, testing of 10000ltr ( India mart ,Model name-
i CCWS.300.01, Item Code-CCWS.300.01.DW) complete as per direction of Nos. 1 94990.00 94990.00
Engineer-in-charge.
Supplying, installing, testing of 5000ltr ( India mart ,Model name-
ii CCWS.300.01, Item Code-CCWS.300.01.DW) complete as per direction of Nos. 2 44250.00 88500.00
Engineer-in-charge.
Providing all materials, labour, T&P for fitting and fixing white glazed
vitreous china water closet (European pattern) with seat cover (solid) of
1 approved make in all floor including supply of sutaible bracket, PVC wall
plug and Brass screws etc. all complete including cost, taxes and conveyance
as per specification all complete as per direction of Engineer-in-charge.
Cost of European water closet with P trap ( SLICK) of Hindware 20011
Providing materials, labour, T&P for fitting and fixing of 1no. cistern sleek
essence dual flush size 476 x155 X320 mm including supply of sutaible PVC
b) wall plug and Brass screws etc. suitable for water closet in all floor etc. all NOS 33.00 2207.72 72854.68
complete including cost, taxes and conveyance as per specification all
complete as per direction of Engineer-in-charge.
Supply all materials and labour for fitting and fixing of following size white
glazed vitreous china wash hand basin of approved make in all floor of
2 approved quality including cutting the walls & floor and making good the NOS 22.00 2236.10 49194.20
damages with cement concrete etc. including all taxes, duties, transportation
etc. all complete as per direction of EIC.
Digitally signed by Rakesh
BALANCE WORK FOR CONSTRUCTION OF LIBRARY WITH LIVELIHOOD HALL AND KNOWLEDGE HUB AT TALCHER
Sl.No. DESCRIPTION OF ITEM UNIT QNTY RATE Rs. AMOUNT Rs.
Supplying all materials, labour & T&P for fitting and fixing of following
sizes of white glazed vitreous china flat back half stall urinal basin
confirming to specification of approved make as per IS-2556 with ISI mark in
all floor along with supply & fixing of necessary component parts like pair of
C.I./M.S. bracket including connection from water supply pipe with all taxes,
duties, transportation etc. all complete as per specification & direction of the
Engineer-in-charge.
(Make:HINDWARE/PARRYWARE/CERA)
a) Flat back half stall urinal . (male urinal) Set 8.00 5320.27 42562.13
Supply & fixing of Bib cock with wall Flange of approved make with ISI
mark in all floor along with supply & fixing of necessary component parts
4 including connection from water supply pipe with all taxes, duties,
transportation etc. all complete as per specification & direction of the
Engineer-in-charge.
(a) 15 mm nominal bore NOS 9.00 1439.60 12956.40
Supply & fixing of Two-way Bibcock with wall Flange with ISI mark in all
floor along with supply & fixing of necessary component parts including
connection from water supply pipe with all taxes, duties, transportation etc.
all complete as per specification & direction of the Engineer-in-charge.
(a) 15 mm nominal bore NOS 35.00 1836.08 64262.80
Supply & fixing of 15mm dia Mixer Pillar Cock with ISI mark in all floor
along with supply & fixing of necessary component parts including
connection from water supply pipe with all taxes, duties, transportation etc.
all complete as per specification & direction of the Engineer-in-charge.
a 15 mm nominal bore NOS 22.00 2946.46 64822.12
Supply & fixing of Health Faucet ABS SS braided hose 1.00m with CP
hook with ISI mark in all floor along with supply & fixing of necessary
7 component parts including connection from water supply pipe with all taxes, NOS 33.00 1169.38 38589.54
duties, transportation etc. all complete as per specification & direction of the
Engineer-in-charge.
Supply & fixing of 15mm dia Angle Stop cock with Wall Flange with ISI
mark in all floor along with supply & fixing of necessary component parts
8 including connection from water supply pipe with all taxes, duties, NOS 61.00 595.90 36349.90
transportation etc. all complete as per specification & direction of the
Engineer-in-charge.
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of
9 approved quality) complete with 6 mm thick hard board ground fixed to NOS 46.00 2581.72 118759.21
wooden cleats with C.P. brass screws and washers complete.
Providing and fixing 600x120x5 mm glass shelf with edges round off,
supported on anodised aluminium angle frame with C.P. brass brackets and
guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.
Hindware(cat no-F840011)
Supply & fixing of C.P. Soap Dish holdere with ISI mark in all floor along
with supply & fixing of necessary component parts including connection from
water supply pipe with all taxes, duties, transportation etc. all complete as per
specification & direction of the Engineer-in-charge.
Supply & fixing of 32mm dia C.P.waste 130 mm ht. (Half Threaded)with
ISI mark in all floor along with supply & fixing of necessary component parts
12 including connection from water supply pipe with all taxes, duties, NOS 22.00 568.76 12512.72
transportation etc. all complete as per specification & direction of the
Engineer-in-charge.
Supply & fixing of 32mm dia C.P. Waste 130 mm ht. (Full Threaded) with
ISI mark in all floor along with supply & fixing of necessary component parts
13 including connection from water supply pipe with all taxes, duties, NOS 1.00 568.76 568.76
transportation etc. all complete as per specification & direction of the
Engineer-in-charge.
Supply & fixing of Towel Rail 600 mm long with ISI mark in all floor along
with supply & fixing of necessary component parts including connection from
water supply pipe with all taxes, duties, transportation etc. all complete as per
specification & direction of the Engineer-in-charge.
Supply & fixing of Concealed stop cock regular body suitable for 20mm
pipeline with spindle extension & plastic protection cap & Exposed Part Kit
of Concealed Stop cock & Flush cock with fitting sleeve,operating Lever &
adjustable Wall flange with seal (compatible with ALD-089).
a Wall MIXTURE(FLR-5273UPR OF JAQUAR) NOS 33.00 5633.32 185899.56
Digitally signed by Rakesh
BALANCE WORK FOR CONSTRUCTION OF LIBRARY WITH LIVELIHOOD HALL AND KNOWLEDGE HUB AT TALCHER
Sl.No. DESCRIPTION OF ITEM UNIT QNTY RATE Rs. AMOUNT Rs.
Providing and fixing Stainless Steel kitchen sink with C.I. brackets and
16 stainless steel plug 40 mm, including painting of fittings and brackets, cutting
and making good the walls wherever required :
a Kitchen sink NOS 1.00 7955.68 7955.68
Providing 15 mm dia Sink cock of Hindware having cat no - F210024 as per
17 IS : 13983 and stainless steel plug 40 mm, including painting of fittings and NOS 1.00 2478.00 2478.00
brackets, cutting and making good the walls wherever required :
Supply & fixing of 100x100 mm dia stainless steel grating in all floor along
with supply & fixing of necessary component parts including connection from
water supply pipe with all taxes, duties, transportation etc. all complete as per
specification & direction of the Engineer-in-charge.
Fitting and fixing Water purifier for drinking purpose of capacity 6
litres/min, 5 purification system with reverse osmosis system with ultra
Ventilated Membrane, TDS 500 to 2000 mgl/ppm, auto shut off with
microswitch float manual flush facility, TDS reduction 90% having
automatic backwash system with filteration unit along with all accessories
19.0 including plug top and electrical lead wire connection upto 3 metres from the Each 2.00 23600.00 47200.00
purifier, water inlet and drain out connections complete in all respects similar
to Aquaguard or similar approved make - (Model - Aquasure Elegant RO
water purifier of size width 360 mm x height - 430 mm x depth 235 mm and
weight 8.5 kg).
Providing all materials, labour, T&P for laying/fixing of following dia CPVC
pipes SDR-11 as per IS-15778/2007 with ISI mark including fixing of
required size CPVC fittings like bend, Tee, elbow, offsets etc. and the same
fixed on wall or floor with holder bat clamps screw in all floor or laying in
20 trenches including excavation of earth work in all kinds of soil & backfilling 0.00
the trenches as per specification & testing the joints with required water
presure.The cost inclusive of all taxes,duties,transportation scaffolding etc. as
per specification and direction of Engineer-in-charge.
Make:Supreme/ASHRIVAD/AJAY.
Providing and fixing chlorinated Vinyl Chloride CPVC Sch-80 Pipes
conforming to ASTM-441 having thermal stability for hot and cold water
supply,including all CPVC Plain & Brass threader fittings including fixing the
21 pipe with clamps at 1.00 mtr spacing.This includes jointing of pipes & fittings
with one step CPVC Solvent cement and testing of joints complete as per
specification and direction of Engineer-in-charge.
Make:Supreme/ASHRIVAD/AJAY.
Providing all materials, labour, T&P for fitting & fixing of following Bronze
Ball Valves confirming to IS-778 with ISI mark in all floor & fixing with the
pipes after cutting the pipes to required shape & size including wastage etc. of
22 following nominal diameter, all complete including testing the joints with
required water pressure.The cost inclusive of all taxes,duties,transportation
scaffolding etc. all complete as per specification and direction of Engineer-in-
a) 20mm dia Bronze ball valve No. 10.00 923.94 9239.40
b) 25mm dia Bronze ball valve No. 10.00 1486.80 14868.00
c) 32mm dia Bronze ball valve No. 10.00 2175.92 21759.20
d) 40mm dia Bronze ball valve No. 8.00 2775.36 22202.88
e) 50mm dia Bronze ball valve No. 8.00 4128.82 33030.56
Providing all materials labour, T&P for making grooves in bricks/stone
masonary walls vertically or horizontally up to required depth and width in all
floor for laying of pipes and fittings up to 50mm dia, testing the joints with
23 required water pressure and making good the damages with cement concrete Mtr. 90.00 200.60 18054.00
1:2:4 with 12mm size h.g.c.b.chips and finished smooth with cement morter
(1:4) to original shape including cost of materials, curing, conveyance, taxes
of all materials etc. all complete as per specification & direction of EIC.
Providing all labour,T&P for cutting holes in bricks or stone masonry wall for
taking pipes in all floors and making good the damages with cement concrete
24 1:2:4 finished smooth with CP 1:4 to original shape including cost of all
materials, curing, conveyance, taxes, duties etc. all complete as per
specification & direction of Engineer-in-charge.
Digitally signed by Rakesh
BALANCE WORK FOR CONSTRUCTION OF LIBRARY WITH LIVELIHOOD HALL AND KNOWLEDGE HUB AT TALCHER
Sl.No. DESCRIPTION OF ITEM UNIT QNTY RATE Rs. AMOUNT Rs.
a) For 15mm to 50mm dia pipe to pass in 125mm to 250mm thick wall No. 110.00 14.24 1566.75
b) For 75mm to 150mm dia pipe to pass in 250mm thick wall No. 60.00 218.30 13098.00
Providing all labour,T&P and cutting holes in RCC chajja/roof/floor for
taking pipes through and making good the damages with supply of all
required materials etc. complete as per the direction of the Engineer-in-
Providing, laying and jointing PVC SWR soil, waste and vent pipes under
floor /suspended under ceiling / fixed on the wall face conforming to
IS:15905-2011 , ISO-6594 Includes necessary fittings like (plain or door)tees,
26 bends, collars, crosses reducers, Y, etc, of approved make, drip seal joint,
suspended under ceiling / embedded in floor. Includes making connection
with sanitary fittings,of approved make etc all complete .(As per
Supreme/Kishan etc)
g) 110mm dia 'T' juncion Nos. 50.00 373.06 18652.85
i) 100mm Single Branch Door Tee Nos. 35.00 726.88 25440.80
j) 75mm Single Branch Door Tee Nos. 12.00 637.20 7646.40
k) 75mm Single Branch Plain Tee 88 D Nos. 25.00 591.18 14779.50
l) 100 mm Single Branch Plain "Y" 45 D Nos. 105.00 710.36 74587.80
m) 75 mm Single Branch Plain "Y" 45 D Nos. 30.00 650.18 19505.40
n) 100mm Double Branch Plain 'Y' 45D Nos. 40.00 716.26 28650.40
o) 100mm Single Branch Door 'Y' 45D Nos. 42.00 739.86 31074.12
p) 100 mm Shielded (SS - 304) Coupling Nos. 65.00 571.12 37122.80
q) 75 mm Shielded (SS - 304) Coupling Nos. 80.00 527.46 42196.80
r) 100 mm WC Connector 350 mm long with EPDM Rubber. Nos. 65.00 656.08 42645.20
w) 100 mm Pipe Wall Clamp Nos. 100.00 611.24 61124.00
x) 75mm Pipe Wall Clamp Nos. 30.00 604.16 18124.80
Supplying all labour, tools and plants and drilling pilot bore 200 mm dia
without casing pipes in all kinds of soils for the following depths excluding
1 supply of necessary cutting equipments, extra sockets (whenever required) -
etc and withdrawing the boring pipes, washing and keeping the bore clear for
logging if required all complete as per the direction of Engineer-in-charge
A) 200mm dia bore 0.00 -
B) 150mm dia bore -
2 Supply of all labour & T&P for lowering the following size G.I./PVC pipes
with or without slotted pipes as per the necessity from ground level and fitted
and fixed up in perfectly vertical position, including cutting and threading
pipe and slotted pipe and fixing all jointing materials etc. complete and -
keeping the top of the casing pipe threaded including plugging tube wells to
prevent entry of foreign materials from above excluding cost of fittings &
jointing materials.
(a) Lowering of 150mm (6'') dia PVC plastic pipes Sch-80 as per ASTM-D-
1785/2004 upto required depth.
Lowering the following size of G.I. / PVC / M.S. housing pipe with or without
slotted pipe as per the necessity for ground level upto 45 mtr depth and fitted
and fixed up perfectly vertical position including cutting and threading of
pipes and slotted pipes and supplying and fixing all jointing materials, tools
and plants etc all complete and keeping the top of the casing pipe threaded
including plugging tube wells to prevent entry of foreign materials.
A) Lowering 200mm dia M.S.ERW pipe casing pipe 0.00 -
cleaning and developing the tube well with supply of compressor worked till
clear and adequate discharge in obtained from the tube well including supply
and use of all necessary equipment and labour as per direction of Engineer-in-
Digitally signed by Rakesh
BALANCE WORK FOR CONSTRUCTION OF LIBRARY WITH LIVELIHOOD HALL AND KNOWLEDGE HUB AT TALCHER
Sl.No. DESCRIPTION OF ITEM UNIT QNTY RATE Rs. AMOUNT Rs.
Supplying all labour, materials and T&P for providing sanitary sealing by
cement concrete grouting of annular space around M.S. casing pipe uptp 5
mtr below groun dlevel to plug the bore hole excluding cost of cement etc all
complete as per direction of EIC.
Supplying submerssible pump with squirrel cage introduction type
submerssible type submerssible electric motor to run on three phase or one
phase line voltage ranging from 320volt to 450volt confirming to IS 8034-
2002 with following specifications
2HP 3Phase 3Stage head range 30-54 meters discharge 155 to 110 LPM with
outlet dia of 32mm
ii DOL control panel Each 2.00 4490.49 8,980.98
iii 40mm steel short piece Each 2.00 179.71 359.43
iv well cap Each 2.00 179.71 359.43
v 50mm size CI bracket Each 2.00 107.73 215.47
vi 2.50 sqmm flat cable Mtr 200.00 151.16 30,231.60
vii steel rope with cover Mtr 200.00 31.51 6,301.20
viii labour charges for lowering including transportation No. 2.00 2360.00 4,720.00
Supplying all materials, labour, T&P and providing and fixing to wall or
ceiling and floor IS marked galvanised mild steel tubes (medium grade)
confirming to IS: 1239/1990, part-1 of the following nominal bore, tube
#REF! fittings and clamps including making good the wall , ceiling and floor, -
testing, cost & conveyance of all materials to worksite, payment of all taxes
etc all complete as per P.H specification and direction of the Engineer-in-
Supplying all materials, labour, T&P and construction of Fullway valve
chamber/Stop cock chamber of the following inside size for fullway valve
with cement concrete slab (1:2:4) mix , 7.50cm thick, foundation concrete
(1:5:10) and inside plastering with cement mortar (1:3) finished with a
floating coat of neat cement including curing etc all complete as per approved
specification and direction of the Engineer in charge
a Inside size 250mm x 250mm x 560mm Each 3 1120.88 3,362.65
SWERAGE PIPELINE TRENCH
Earth work in excavation by mechanical means (Hydraulic excavator) /
manual means in foundation trenches or drains (not exceeding 1.5 m in width
1 or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift cum 17.50 219.95 3849.16
upto 1.5 m, including getting out the excavated soil and disposal of surplus
excavated soil as directed, within a lead of 50 m.
Providing and laying of Cement Concrete of grade 1: 3 :6 (1cement : 3 sand :
6 graded stone aggregate 40 mm nominal size ) of approved quality from
quarry mixing in concrete mixer ,lowering and compacting in proper
2 thickness , watering & curing for the required period .including all cost of
labour ,material,conveyance,royalties and taxes ,sundries ,T & P etc. but
excluding the cost of centering and shuttering all complete as per the
directions of Engineer-in-charge.
1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal
Filling in foundation, trenches and plinth with river sand, well watered and
compacted in layers with top surface dressed and leveled to proper gradient
3 including cost of all materials, conveyance, all taxes and royalties, loading
and unloading, including cost of all labour, sundries ,T & P etc. All complete
as per directions of the Engineer -in-charge.
Sand filling in drain trench cum 3.75 387.87 1454.50
Supplying and filling in for CC lining 75 mm all arround on PVC pipes and
4 base along with Jamuna sand under floors, including watering, ramming,
consolidating and dressing complete.
CC lining in drain pipes @ A(0.0490-0.00785)
Extra CC lining in drain IC chambers @ 10% extra
Supplying all materials,labour,T&P and laying in trenches unplasticated PVC
pipes conforming to IS:4985-2000 and specials of the following outside
diameter for all classes including jointing with supply of approved solvent
cement bu non-heat application method including testing, contractor profit &
labour cess etc as per specification complete (Earth work in trenches to be
measured and paid for separately) including cost of pipe,conveyance of pipe
to worksite ,contractor profit & labour cess as per direction of Engineer-In-
charge.(Ref :-ARPH-2013,Sl No.2.3.1,P-36-39)
Digitally signed by Rakesh
BALANCE WORK FOR CONSTRUCTION OF LIBRARY WITH LIVELIHOOD HALL AND KNOWLEDGE HUB AT TALCHER
Sl.No. DESCRIPTION OF ITEM UNIT QNTY RATE Rs. AMOUNT Rs.
Supply, fitting & fixing of Pvc butterfly/gate VALVES with fittings 110
mm of 10 kg pr rating as per directions of the Engineer -in-charge.
TOTAL AMOUNT: PLUMBING WORK 59,69,616.54
TOTAL AMOUNT: PLUMBING WORK 59,69,616.54
INTERNAL ELECTRICAL WORK:MUSEUM BUILDING
A Sub-Head I (modular Wiring Items)
Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point
with 1.5 sq.mm FRLSH/LSZH PVC insulated copper conductor of ISI
marked with 20 mm dia PVC flexible non metallic conduit FRLS type ISI
marked 6A modular type (anti bactorial & falme retradant type) switch
1 ISI marked and ceiling rose ISI marked of modular type G.I box with metallic
cover plate (both side) (anti bactorial & falme retradant type) of suitable size,
modular box with 1.5 sq. Mm FRLSH PVC insulated single core
multistandard copper conductor as earth wire including all accessories and
connection as per direction of Engineer -in -Charge.
Group control of point in Recessed wirring to light point/ fan point/ exhaust
fan point/ call bell point with 1.5 sq.mm FRLSH/LSZH PVC insulated copper
conductor of ISI marked 20 mm dia PVC flexible non metallic conduit FRLS
type ISI marked with 6A modular type((anti bactorial & falme retradant
b) type)) switch ISI marked of modular type G.I box with metallic cover plate Nos 77.00 221.84 17081.68
(both side)(anti bactorial & falme retradant type) of suitable size, modular
box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper
conductor as earth wire including all accessories and connection as per
direction of Engineer -in -Charge.
Group control of point in existing false ceiling wirring to light point/ fan
point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLSH/LSZH PVC
insulated copper conductor of ISI marked as
approved with 20 mm dia steel conduit ISI mark metallic conduit ISI
marked with 6A modular type((anti bactorial & falme retradant type))
switch ISI marked and ceiling rose ISI marked of modular type G.I box with
metallic cover plate (both side)(anti bactorial & falme retradant type) of
suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core
multistandard copper conductor as earth wire including all accessories and
connection as per direction of Engineer -in -Charge.
Supplying ,fixing of 6A Plug on the same board in existing switch board with
complete fitting by 01 no of 6A switch & socket (modular type)( (anti
bactorial & falme retradant type)) & other required accessories of ISI
marked as approved as per direction of Engg. -in -Charge.
Supplying,fixing of 6A Plug on the separate board with complete fitting by
01 no of 6A switch & socket(modular type)( (anti bactorial & falme
retradant type)) with suitable size modular box & cover(anti bactorial &
falme retradant type) including supplying of all required accessories of ISI
marked as approved as per direction of engg-in-charge..Make-
Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision) or equievalant
e) make & model ISI marked as approved , complete suitable for Nos 145.00 591.18 85721.10
STADIUM.(Maximum 02 nos point in one circuit).All the switches &
sockets should be warrantied for a period of 10 years against
manufacturing defects against which ncessary test report & Warrnaty
certificate to be submitted to the department for genuinity of product &
to avail free aftersales service within warranty period for acceptance of
Supplying,fixing of 1x16A Plug on the separate board with complete fitting
by 01 no of 16A switch & socket(modular type)((anti bactorial & falme
f) retradant type)) with suitable size modular box & cover(anti bactorial & Nos 67.00 752.84 50440.28
falme retradant type) including supplying of all required accessories of ISI
marked as approved as per direction of engg-in-charge
Digitally signed by Rakesh
BALANCE WORK FOR CONSTRUCTION OF LIBRARY WITH LIVELIHOOD HALL AND KNOWLEDGE HUB AT TALCHER
Sl.No. DESCRIPTION OF ITEM UNIT QNTY RATE Rs. AMOUNT Rs.
Supplying,fixing of 1x6A+1X1 6A Plug on the separate board with complete
fitting by 01 no of 16A+1 no 6A switch & socket(modular type) ( (anti
bactorial & falme retradant type) with suitable size modular box & metallic
cover plate (both side)(anti bactorial & falme retradant type)including
supplying of all required accessories of ISI marked as approved as per
direction of engg-in-charge.
Receass wiring for circuit/submain wiring with the following mentioned size
PVC FRLSH/LSZH insulated, copper conductor, single core cable or
equievalant reputed make A catagory ISI marked as approved, in recessed
2 PVC conduit Heavy duty FRLS of mentioned size as required as per 0.00
direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to
be submitted to the department for genuinity of product & to avail free after
sales service within warranty period for acceptance of materials
2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of
single core 1.5 sq. mm copper wire for earth continuty conductor. In 20 mm
dia non metallic heavy duty flexible conduit (LDB to LSB/LIGHT
2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of
single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm
dia non metallic heavy duty flexible conduit.(BDB to LSB/LIGHT CKT/5A
PLUG/INVERTER POINT TO EACH QTR) (2X2.5+1X1.5)
4 nos single core 2.5 sq. mm copper wire for phase and neutral and 02 nos
of single core 2.5 sq. mm copper wire for earth continuty conductor .in 25
mm dia non metallic heavy duty flexible conduit(LDB to LSB/5A SOCKET)
2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of
single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm
d) dia non metallic heavy duty flexible conduit .(PDB to PSB/ GAYSER Mtr 399.00 186.44 74389.56
POINT/AC POINT/ROOM LIGHT CONTROL TO CORRIDOOR
POINT/DG PANEL ESSENTIAL LOAD) (2X4+1X1.5)
4 nos single core 4 sq. mm copper wire for phase and neutral and 02 nos of
single core 2.5 sq. mm copper wire for earth continuty conductor in 32 mm
e) dia non metallic heavy duty flexible conduit.(PDB to PSB/GAYSER. Mtr 299.00 284.38 85029.62
POINT/AC POINT/DG PANEL ACCL TO EACH QTR ESSENTIAL
LOAD) (4X4+2X2.5)
2 nos single core 6 sq. mm copper wire for phase and neutral and 01 no of
single core 2.5 sq. mm copper wire for earth continuty conductor in 25 mm
dia non metallic heavy duty flexible conduit .(LFDB TO LBDB)
4 nos single core 6 sq. mm copper wire for phase and neutral and 02 nos of
single core 2.5 sq. mm copper wire for earth continuty conductor in 32 mm
dia non metallic heavy duty flexible conduit.(LFDB TO LBDB/power
unit/point) (4X6+2X2.5)
4 nos single core 10 sq. mm copper wire for phase and neutral and 02 nos of
single core 4 sq. mm copper wire for earth continuty conductorin 32 mm dia
non metallic heavy duty flexible conduit .(LFDB TO FLOOR PANEL TO
TPN BDB light ) (4X10+2X4)
4 nos single core 16 sq. mm copper wire for phase and neutral and 02 nos of
single core 10 sq. mm copper wire for earth continuty conductor in 40 mm dia
non metallic heavy duty flexible conduit.(FLOOR PANEL TO TPN BDB
power) (4X16+2X10)
Supplying and fixing 20 amps, 240 volts, SPN, industrial type socket outlet,
with 2 pole and earth metal enclosed plug top along with 32 amps. C-series,
3 SP MCB, in sheet steel enclosure, on surface or in recess, with chained metal Nos 26.00 715.08 18592.08
cover for the socket outlet, and complete with connections, testing and
commissioning etc. as required as per direction of Engg.-in-Charge.
Supplying and fixing 32 amps, 415 volts, TPN, industrial type socket outlet,
with 4 pole and earth metal enclosed plug top along with 32 amps. C-series,
TP MCB, in sheet steel enclosure, on surface or in recess, with chained metal
cover for the socket outlet, and complete with connections, testing and
4 commissioning etc. as required as per direction of Engg.-in-Charge.All the Nos 2.00 5075.18 10150.36
Components should be warrantied for a replacement period of 5 years against
defects with ncessary test report & Warrnaty certificate to be submitted to the
department for genuinity of product & to avail free aftersales service within
warranty period for acceptance of materials.
Digitally signed by Rakesh
BALANCE WORK FOR CONSTRUCTION OF LIBRARY WITH LIVELIHOOD HALL AND KNOWLEDGE HUB AT TALCHER
Sl.No. DESCRIPTION OF ITEM UNIT QNTY RATE Rs. AMOUNT Rs.
Supplying and fixing following size/ modules, GI box along with modular
5 base & metallic cover plate (both side)(anti bactorial type) plate for modular 0.00
switches in recess etc as required as per direction of Engg.-in-Charge .
Supplying and fixing of following sizes of medium class PVC FRLS conduit
ISI marked along with accessories in surface/recess including cutting the wall
and making good the same in case of recessed conduit as required as per
direction of Engg.-in-Charge.
Supply and fixing modular type indicator on the existing switch box/cover .
reputed make & model A catagory ISI marked as approved as required as per
direction of Engg.-in-Charge.All the Components should be warrantied for a
7 replacement period of 5 years against defects with ncessary test report & Nos 50.00 123.90 6195.00
Warrnaty certificate to be submitted to the department for genuinity of
product & to avail free aftersales service within warranty period for
acceptance of materials.
Supplying and installation of AC starter Modular type, equievalant reputed
make & model A catagory ISI marked as approved coil voltage-415 Volt A.C.
& O/L range of 9-14A range on mod Box of suitable size including modular
coveras required as per direction of Engg.-in-Charge .All the Components
should be warrantied for a replacement period of 5 years against defects
with ncessary test report & Warrnaty certificate to be submitted to the
department for genuinity of product & to avail free aftersales service within
warranty period for acceptance of materials.
Supply and fixing CALL bell (Ding dong type) /Buzzer on the existing switch
box/cover.reputed make & model A catagory ISI marked as approved .as
required as per direction of Engg.-in-Charge.All the Components should be
9 warrantied for a replacement period of 5 years against defects with ncessary Nos 8.00 239.54 1916.32
test report & Warrnaty certificate to be submitted to the department for
genuinity of product & to avail free aftersales service within warranty period
for acceptance of materials.
S/F of Bakelite angle holder/batten holder equievalant reputed make A
catagory ISI marked as approved )of ISI marked conforming to IS-1258/1987
in place of ceiling rose as per direction of Engg.-in-Charge .All the
10 Components should be warrantied for a replacement period of 5 years against EACH 65.00 68.44 4448.60
defects with ncessary test report & Warrnaty certificate to be submitted to the
department for genuinity of product & to avail free aftersales service within
warranty period for acceptance of materials.
Supplying,fixing of Blanking plate(modular type)( (anti bactorial & falme
retradant type)) in existing switch box(anti bactorial & falme retradant
type) including supplying of all required accessories of ISI marked as
approved as per direction of engg-in-charge.
B Sub-Head II (Light fitting Fixture & Fan)(only basic required fittings) 0.00
Supplying, installation, of exhaust fan of heavy duty 300 mm sweep
(Equievalant higher model with 5 star rated reputed make & model A
1 catagory ISI marked as approved ) of exhaust fan in the existing wall, Nos 18.00 3606.08 64909.44
including fixing & conntection as required as per direction of Engg.-in-
Charge. Replacement Warranty will be 5 years.
Supplying, installation, of exhaust fan of heavy duty 380 mm sweep 1400 rpm
with louvers ( reputed make & model A catagory ISI marked as approved
2 ) of exhaust fan in the existing wall, including fixing & conntection .as Nos 8.00 4255.08 34040.64
required as per direction of Engg.-in-Charge. Replacement Warranty will be 5
Supplying, installation, testing and commssioning of 1400 mm sweep
white/milky colour ceiling fan reputed make & model A catagory ISI
marked as approved ) including wiring the down rod of standard length
(upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core
cable etc. as required.(With fan Regulator) as required as per direction of
Engg.-in-Charge.Replacement Warranty will be 5 years.
Digitally signed by Rakesh
BALANCE WORK FOR CONSTRUCTION OF LIBRARY WITH LIVELIHOOD HALL AND KNOWLEDGE HUB AT TALCHER
Sl.No. DESCRIPTION OF ITEM UNIT QNTY RATE Rs. AMOUNT Rs.
Supplying, installation, testing and commssioning of 1200 mm sweep
white/milky colour ceiling fan including wiring the down rod of standard
4 length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single Nos 100.00 2358.82 235882.00
core cable etc. as required as per direction of Engg.-in-Charge,Replacement
Warranty will be 5 years.. .(With fan Regulator)
Supplying and fixing of Energy efficient 24W, High efficient surface
mounted LED round downlighter with white powder coated, pressure die cast
aluminium housing. High transmittivity PS diffuser provides soft light.
CRI>80, IP20, Ambient temp-0 to 45DegC, CCT - 4000/5700K, 50,000 hrs @
L70 life.Driver efficiency>85%, THD<10%, Powerfactor>0.9, Surge
protection-2 kV, Multistage Isolated Constant Current-Constant Voltage
operated driver with range 90-265V AC and Safety Extra Low Voltage Safe
level<60V DC as per IEC standard. Luminaire lumen ≥ 2400 lm. (100 lm/W)
Similar to Wipro Make LD06-301XXX-40SMG1or equivalent Philips/
LT/Trilux or equievalant make A Catagory,ISI marked as approved make. .as
required as per direction of Engg.-in-Charge . The luminaire must be
Replacement Warranty will be 5 years.
Supplying and fixing of Energy efficient 12W, High efficient surface
mounted LED round downlighter with white powder coated, pressure die cast
aluminium housing. High transmittivity PS diffuser provides soft light.
CRI>80, IP20, Ambient temp-0 to 45DegC, CCT - 4000/5700K, 50,000 hrs @
L70 life.Driver efficiency>85%, THD<10%, Powerfactor>0.9, Surge
protection-2 kV, Multistage Isolated Constant Current-Constant Voltage
operated driver with range 90-265V AC and Safety Extra Low Voltage Safe
level<60V DC as per IEC standard. Luminaire lumen ≥ 1200 lm. (100 lm/W)
Similar to Wipro Make LD06-151XXX-40SMG1 or equivalent Philips/
LT/Trilux make. or equievalant make A Catagory,ISI marked as approved
make. .as required as per direction of Engg.-in-Charge . The luminaire must
be Replacement Warranty will be 5 years.
Supplying and fixing of Energy efficient 30W, High efficiency
surface/suspended downlighter designed with aluminum body powder coated
in white or black and clear glass COB LED. CRI>80, IP20, Ambient temp- 0
to 45 DegC, Driver efficiency>85%, THD<20%,Powerfactor>0.9, CCT -
4000K/5700K, 50,000 hrs @ L70 life.Surge protection-2 kV, Multistage
Isolated Constant Current-Constant Voltage operated driver with range 140-
270V AC and Safety Extra Low Voltage Safe level<60V DC as per IEC
standard. Luminaire lumen ≥ 2400 lm. (80 lm/W). Similar to Wipro Make
LD30-301-36W-40-PS or equivalent Philips/ LT/Trilux make. or equievalant
make A Catagory,ISI marked as approved make. .as required as per direction
of Engg.-in-Charge . The luminaire must be Replacement Warranty will be 5
SITC of energy efficient LED tube light fittings with decorative alluminium
batten and LED tube light having power rating not more than 20 watt and
lumen output not less than 2200 lumen complete with electronic driver and
all other accessories with diffuser having 5 years warranty i/c connection etc
as required as per direction of Engg.-in-Charge. The luminaire should be
Replacement Warranty will be 5 years .
SITC of Sleek LED 10 watt mirror light fitting with extruded polycarbonate
housing,High optically efficient diffuser,above wash basin complete with all
accessoriesetc. directly on wall, including connection with 1.5 sq. mm FRLS
PVC insulated, copper conductor, single core cable and earthing etc. as
required as per direction of Engg.-in-Charge.
The luminaire should be Replacement Warranty will be 5 years
SITC of IP 20 Non-integral flexible LED strip light,High optically efficient
diffuser,, 3000K with 12 w/mtr @ 5Mtr pool with Driver extra as required as
per direction of Engg.-in-Charge ( Make : (Make: wipro LS06-005-120---or
10 similar model of LT/Trilux /Philips/Panasonic or equievalant or similar Nos 10.00 2310.44 23104.40
model of /PHILIPS/Wipro or equievalant reputed make & model A
catagory ISI marked as approved. )The luminaire should be Replacement
Warranty will be 5 years
Supplying and fixing of small focus light for small monuments as 6W , 4000
11 K required as per direction of Engg.-in-Charge .The luminaire should be Nos 12.00 1611.88 19342.56
Replacement Warranty will be 5 years
Digitally signed by Rakesh
BALANCE WORK FOR CONSTRUCTION OF LIBRARY WITH LIVELIHOOD HALL AND KNOWLEDGE HUB AT TALCHER
Sl.No. DESCRIPTION OF ITEM UNIT QNTY RATE Rs. AMOUNT Rs.
Supplying and fixing of step light for WALL as 3W , 2000 K required as
12 per direction of Engg.-in-Charge .The luminaire should be Replacement Nos 15.00 2120.46 31806.90
Warranty will be 5 years
Supplying and fixing of bush light as 8W , 6000 K required as per direction
13 of Engg.-in-Charge.The luminaire should be Replacement Warranty will be 5 Nos 8.00 2752.94 22023.52
Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm
dia, heavy gauge including painting etc. as requiredas required as per
14 direction of Engg.-in-Charge . Nos 499.00 36.58 18253.42
(Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm
or less shall be ignored)of ISI mark as approved.
SITC of energy efficient occupancy sensor having power rating not more than
10 watt and all other accessories connection etc as required as per direction
of Engg.-in-Charge. The luminaire should be Replacement Warranty will
C BDBS,DB,AC DB,FLOOR PANELS,MCBS
Supplying and fixing of following mentioned way, three pole/single pole and
neutral, sheet steel,double door MCB distribution board, 415 volts/240 volts
shall be as per IEC 61439-3,integrated door earthing system offering
additional safety to the user,High quality polyurethane Gasket,the box and
cover shall be fabricated to withstand IK09,the DB should be properly pre-
treated with 7 tank process and duly powder coated, phosphatized with
powder coated finish, on surface/recess, complete with terminal blocks,with
suitable size FR PVC insulated copper conducter up to terminal blocks,
tinned copper busbar, neutral busbar, earth bar, din bar. or equievalant
reputed make & model A catagory ISI marked as approved. as per direction
of Engg.-in-Charge. The Distribution boards should be Replacement
Warranty will be 5 years
4 Way(8+12) Way TPN MCB DD DB Horizontal Type as per IEC 61439-3
suitable for Flush mounting and Surface mounting with 100A Copper Bus Bar
for each phase, with neutral Bus bar, Earth Bar & Cable ties for cable
management, prefitted masking sheet, IP43-IK09 with metal door(FOR
LIGHT,POWER INDOOR,3-PH,POWER LOAD) Warranty on DB is 2
Supply and fixing of 12 way DD single pole and neutral sheet steel MCB
distribution board 250V on surface/recess complete with tinned copper bus
bar, neutral bus bar, earth bar, din bar, detachable gland plate,
b) interconnections, phosphatized and powder painted including earthing etc. as Nos 20.00 2236.10 44722.00
required (but with out MCB/ RCCB/ Isolator) (ALL LIGHT WITH
CORRIDOOR/COMMON AREA,EM LIGHT,UPS LOAD, EM LOAD
LIGHT LOAD,POWER LOAD )
2+4 way MCB Enclosure DB (GLAZED door)(only each EM.
CONNECTION UPS LOAD)
8 Way(8+24) Way TPN MCB DD DB Horizontal Type as per IEC 61439-3
suitable for Flush mounting and Surface mounting with 100A Copper Bus Bar
d) for each phase, with neutral Bus bar, Earth Bar & Cable ties for cable Nos 25.00 3176.56 79414.00
management, prefitted masking sheet, IP43-IK09 with metal door(FOR
LIGHT,POWER INDOOR,3-PH,POWER LOAD)
Supplying and fixing 20 amps rating, 240 volts, C series, Double poles MCB
in the existing MCB DB complete with connections as per direction of Engg.-
in-Charge. The MCB should be Replacement Warranty will be 5 years
.MCB should have the fault indication system in different colour for ON, OFF
& TRIP condition or Mid trip position for Trip conditions for easier
identification of fault.Warranty on MCB is 5 years.
Supplying and fixing 6 amps to 32 amps rating, 240 volts, C series, single
poles MCB of equievalant reputed make & model A catagory ISI marked as
approved. the existing MCB DB complete with connections as per direction
3 of Engg.-in-Charge. The MCB should be Replacement Warranty will be 5 Nos 488.00 153.40 74859.20
years.MCB should have the fault indication system in different colour for ON,
OFF & TRIP condition or Mid trip position for Trip conditions for easier
identification of fault.Warranty on MCB is 5 years.
Supplying and fixing 40 Amps rating, TPN, 415 volts, RCCB,300mA .
reputed make & model A catagory ISI marked as approved in the existing
MCB DB complete with connections, testing and commissioning etc. as
required as per direction of Engg.-in-Charge. .(4W TPN BDB IC)AC ODU
CONTROLLER). The RCCB should be Replacement Warranty will be 5
Digitally signed by Rakesh
BALANCE WORK FOR CONSTRUCTION OF LIBRARY WITH LIVELIHOOD HALL AND KNOWLEDGE HUB AT TALCHER
Sl.No. DESCRIPTION OF ITEM UNIT QNTY RATE Rs. AMOUNT Rs.
Supplying and fixing 25Amps DP 240 volts, RCCB,300mA equievalant
reputed make & model A catagory ISI marked as approved in the existing
5 MCB DB in the existing MCB DB complete with connections as per Nos 8.00 1987.12 15896.96
direction of Engg.-in-Charge. The RCCB should be Replacement Warranty
will be 5 years
Supplying and fixing 40Amps DP 240 volts, RCCB,300mA equievalant
reputed make & model A catagory ISI marked as approved in the existing
6 MCB DB in the existing MCB DB complete with connections as per Nos 8.00 2266.78 18134.24
direction of Engg.-in-Charge. The RCCB should be Replacement Warranty
will be 5 years
Supplying and fixing 63Amps DP 240 volts, RCCB,300mA equievalant
reputed make & model A catagory ISI marked as approved in the existing
7 MCB DB in the existing MCB DB complete with connections as per Nos 5.00 2614.88 13074.40
direction of Engg.-in-Charge.The RCCB should be Replacement Warranty
will be 5 years
Supplying and fixing 63Amps TPN 415 volts, RCCB,300mA Make-
Equievalant higher model of Legrand/Snheider/Siemens /
L&T/Panasonic /ABB or equievalant reputed make & model A catagory ISI
8 marked as approved in the existing MCB DB in the existing MCB DB Nos 25.00 3108.12 77703.00
complete with connections as per direction of Engg.-in-Charge.(for power
BDB & AC ODU, 8 way TPN BDB IC).The RCCB should be Replacement
Warranty will be 5 years
D (Earthing) INSTALLATION
S/IT/C Of Earthing with copper earth plate 600 mm x 600mm x 6 mm thick
ISI marked including accessories and providing masonary with cover plate
1 having loccking arrangement and watering pipe etc (WITH charcoal and Nos 2.00 6609.18 13218.36
salt) as required as per direction of Engg.-in-Charge. The entire earthing
system should be Replacement Warranty will be 5 years
S/IT/C of materials and installation of pipe earth electrode made out of 50mm
dia class B G.I. pipe of 3.0 metre long with arrangements for fitting/
termination of G.I. flat / wire with G. I. nut bolts & washers including cost
of burnt wood charcoal, salt, foreign soil, water pouring arrangements, brick
masonary enclosure on top with removable RCC cover complete with labour
for excavation of pit in all kinds of soil & rock as required and as per
direction of Engineer-in-charge.The entire earthing system should be
Replacement Warranty will be 5 years
Providing and fixing 4 mm dia copper wire on surface or in recess for loop
earthing as required.as per direction of Engg.-in-Charge.
Providing and fixing 25mm x 5 mm copper strip on surface or in recess for
connections etc. as required as per direction of Engg.-in-Charge.
Providing and fixing 50mm x 5 mm copper strip on surface or in recess for
connections etc. as required as per direction of Engg.-in-Charge.
Supplying and making brick massonary pedastal with extra super structure
6 including cement plastering etc as required as per direction of Engg.-in- Mtr 3.00 2950.00 8850.00
E CABLING AND END TERMINATION MAIN AREA
Supplying of one number PVC insulated armoured and PVC sheathed XLPE
property AL. conductor power cable of 1.1 KV grade
POLYCAB/HAVELLS/Finolex or equievalant reputed make ISI marked
1 as approved of following size cables as per direction of Engg.-in-Charge.
Ncessary test report & Warrnaty certificate to be submitted to the department
for genuinity of product & to avail free after sales service within warranty
period for acceptance of materials
3.5core x 300 sq mm ( TO MAIN PANEL TRIPPLE /FOUR RUN/DG SET
TO MAIN PANEL TRIPPLE RUN )
b) 3.5core x 185 sq mm (AC PANEL INCOMMER) Mtr 85.00 1036.82 88129.60
c) 3.5core x 150 sq mm(MAIN PANEL to OFFICE BUILDING FROM BBT) Mtr 85.00 829.46 70503.88
Supplying of one number PVC insulated armoured and PVC sheathed XLPE
property AL. conductor power cable of 1.1 KV grade
POLYCAB/HAVELLS/Finolex or equievalant reputed make ISI marked
1.1 as approved of following size cables as per direction of Engg.-in-Charge.
Ncessary test report & Warrnaty certificate to be submitted to the department
for genuinity of product & to avail free after sales service within warranty
period for acceptance of materials
Digitally signed by Rakesh
BALANCE WORK FOR CONSTRUCTION OF LIBRARY WITH LIVELIHOOD HALL AND KNOWLEDGE HUB AT TALCHER
Sl.No. DESCRIPTION OF ITEM UNIT QNTY RATE Rs. AMOUNT Rs.
b) 3.5core x 70 sq mm ( FOR LIGHT/EQUP. PANEL) Mtr 80.00 450.28 36022.10
c) 4core x 16 sq mm (MDB TO FDBL/FDBU SUB,BDB PANEL 02 runs) Mtr 90.00 171.82 15463.78
d) 4 core x 4 sq mm (for small power/LIGHT TO POLE) Mtr 195.00 103.69 20218.89
e) 3.5core x 35 sq mm (To power BDB/UPS PANEL) Mtr 100.00 257.72 25772.38
2 LAYING OF CABLE
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade
size not exceeding 25 SQ. MM direct in ground in the trench in one
horizental formation including excavation ,sand coushing protection covering
and refilling the trench etc as required as per direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade
size exceeding 25 SQ. MM but not exceeding 120 SQ. MM direct in ground
2.2 in the trench in one horizental formation including excavation ,sand coushing Mtr 90.00 165.20 14868.00
protection covering and refilling the trench etc as required as per direction of
Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade
size exceeding 120 SQ. MM but not exceeding 400 SQ. MM direct in
2.3 ground in the trench in one horizental formation including excavation ,sand Mtr 250.00 181.72 45430.00
coushing protection covering and refilling the trench etc as required as per
direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade
2.4 size not exceeding 25 SQ. MM direct in ground in the EXISTING PIPE etc Mtr 206.00 47.20 9723.20
as required as per direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade
2.5 size exceeding 25 SQ. MM but not exceeding 400 SQ. MM direct in ground Mtr 70.00 63.72 4460.40
in the EXISTING PIPE etc as required as per direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade
2.6 size not exceeding 25 SQ. MM in open duct etc as required as per direction Mtr 45.00 37.76 1699.20
of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade
2.7 size exceeding 25 SQ. MM in open duct 400 SQ. MM direct in ground in the Mtr 33.00 50.74 1674.42
EXISTING PIPE etc as required as per direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade
2.8 size not exceeding 25 SQ. MM in surface with shaddle and screw etc as Mtr 33.00 90.86 2998.38
required as per direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade
2.9 size not exceeding 120 SQ. MM From 25 SQ. MM in surface with shaddle Mtr 40.00 145.14 5805.60
and screw etc as required as per direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade
2.10 size not exceeding 400 SQ. MM From 120 SQ. MM in surface with shaddle Mtr 33.00 148.68 4906.44
and screw etc as required as per direction of Engg.-in -charge.
Supplying and making end termination with brass compression gland and
3 aluminium lugs for following mentioned size cable.as per direction of Engg.-
Providing,fixing and laying of fallowing dia G.I. pipe (medium class) in
4 ground complete with G.I fitting incl. trenching(75 mm depth)and refilling as
per direction of Engg.-in-Charge.
Providing,fixing and laying of fallowing dia HDPE pipe (medium class) in
5 ground complete with fitting incl. trenching(75 mm depth)and refilling as per
direction of Engg.-in-Charge.
MAIN UPS PANEL (20) KVA 2 NOS ON LINE UPS 3PH-3PH)AT GF
control room FOR SMALL EQUIPEMENT & COMMON AREA
EMERGENCY POWER
Digitally signed by Rakesh
BALANCE WORK FOR CONSTRUCTION OF LIBRARY WITH LIVELIHOOD HALL AND KNOWLEDGE HUB AT TALCHER
Sl.No. DESCRIPTION OF ITEM UNIT QNTY RATE Rs. AMOUNT Rs.
S/I/T&Commissioning of LT indoor floor mounted cubical type electrical
main panel (for both light and power circuit) made out by 2mm CRCA steel
sheet duly derusted & pented by simens gray powder cote paint is designed as
1 G.A drawing. (FOR COMMON LOAD)as per direction of Engg.-in- Set 1.00 137844.06 137844.06
Charge. Warrentee period of replacement of panel & accessories must be
5 years & compelete test certificate must be submitted along with panel
board including component list.
In commer-01- 02 number of 100A,ICU=0.8 In 4P TYPE,MCCB with
ROM 25kA with adjustable Thermal Magnetic Release with Ics=100% Icu.
(make- Equievalant LSING model of Legrand-(DPX3)/Schneider-
(NSX)/Siemens-(3VM)/L&T(D SINE,MTX-1) or equievalant make with
proper model) ISI marked)with shunt trip.with axulary for BMS .(From 100
KVA UPS)(Provission for EM. Connection of UPS parallel to system.
BUS COUPLER - 01 number of 100A,ICU=0.8 In 4P TYPE,MCCB (make-
b ABB/Siemens/SCHNEIDER/L&T/Legrand, ISI marked) .With axulary
Busbar-1- 02 numbers of 01 SETS 200Amps Electrolytic copper busbar duly
c sleeved by color coaded PVC sleeve & supported by suitable size DMC
Out going-1- (i) 4 nos 32A TPN MCB ( Make-LEGRAND-Ekinox3 DB/
Siemens-Betaguard/ Schneider- Acti 9/L&T (Equievalant
d model)/Panasonic(Equivalant model) /ABB(Equivalant model equievalant
make with proper model) ISI marked)( for em. Lighting,power
)(Legrand/Schneider make)
Out going-2- (i) 06 nos 40A TPN MCB ( Make-LEGRAND-Ekinox3 DB/
Siemens-Betaguard/ Schneider- Acti 9/L&T (Equievalant
model)/Panasonic(Equivalant model) /ABB(Equivalant model equievalant
make with proper model) ISI marked) (em. CDB)
Instrument- (i) 06 numbers phase indicating lamp with toggle switch & HRC
i (ii) 02 sets of MFM with RS485 & CTs.
ii iii) 04 nos 40kA SP VSD with 32A SP MCB.(Legrand/Schneider make)
NB- This panel should have proper earth by suitable rated copper flat.
2 FLOOR PANEL AT EACH FLOOR FOR UL,2F,3F,4F,5F POWER
S/I/T&Commissioning of LT indoor floor mounted cubical type electrical
main panel (for both light and power circuit) made out by 2mm CRCA steel
sheet duly derusted & pented by simens gray powder cote paint is designed as
a G.A drawing as per direction of Engg.-in-Charge. Warrentee period of Set 4.00 99236.82 396947.28
replacement of panel & accessories must be 5 years & compelete test
certificate must be submitted along with panel board including component
In commer- 01 number of 250(160-200) Amps 3P MCCB with encapsulated
b double break . (make-ABB/Siemens/SCHNEIDER/L&T/Legrand, ISI
marked)(Icu=100%Ics)with shunt trip.with axulary for BMS
Busbar- 04 numbers of 300Amps Electrolytic copper busbar duly sleeved by
color coaded PVC sleeve & supported by suitable size DMC insulator.
Out going- (i) 63A 4P MCB 06 NOS FOR POWER BDB (Legrand/Schneider
make) for POWER BDB
Out going- (ii) 06 nos 32A 4P MCB LIGHT BDB AC IDU BDB/LIGHT
BDB(Legrand/Schneider make) For AC indoor BDB
Instrument- (i) 03 numbers phase indicating lamp with toggle switch & HRC
i (ii) 01 set of 0-200Amps Ameter with selecter switch & CTS.(DIGITAL)
ii (iii) 01 set of 0-500 voltmeter with selecter switch.(DIGITAL)
3 FLOOR PANEL AT EACH FLOOR FOR UL,2F,3F,4F,5F LIGHT
S/I/T&Commissioning of LT indoor floor mounted cubical type electrical
main panel (for both light and power circuit) made out by 2mm CRCA steel
sheet duly derusted & pented by simens gray powder cote paint is designed as
a G.A drawing as per direction of Engg.-in-Charge. Warrentee period of Set 5.00 69274.26 346371.30
replacement of panel & accessories must be 5 years & compelete test
certificate must be submitted along with panel board including component
Digitally signed by Rakesh
BALANCE WORK FOR CONSTRUCTION OF LIBRARY WITH LIVELIHOOD HALL AND KNOWLEDGE HUB AT TALCHER
Sl.No. DESCRIPTION OF ITEM UNIT QNTY RATE Rs. AMOUNT Rs.
In commer- 01 number of 125 (80-100)Amps 3P MCCB with encapsulated
b double break . (make-ABB/Siemens/SCHNEIDER/L&T/Legrand, ISI
marked)(Icu=100%Ics)with shunt trip.with axulary for BMS
Busbar- 04 numbers of 150Amps Electrolytic copper busbar duly sleeved by
color coaded PVC sleeve & supported by suitable size DMC insulator.
Out going- (i)40A 4P MCB 02 NOS FOR EM. POWER BDB (Legrand
e Out going- (ii) 06 nos 32A 4P MCB POWER BDB AC IDU /LIGHT BDB
Instrument- (i) 03 numbers phase indicating lamp with toggle switch & HRC
ii (ii) 01 set of 0-100Amps Ameter with selecter switch & CTS.(DIGITAL)
iii (iii) 01 set of 0-500 voltmeter with selecter switch.(DIGITAL)
4 FOR EMERGENCY LIGHT/POWER LOAD OF FLOOR(1F-4F)(UPS)
S/I/T&Commissioning of LT indoor floor mounted cubical type electrical
main panel (for both light and power circuit) made out by 2mm CRCA steel
sheet duly derusted & painted by simens grey powder cote paint is designed
as G.A drawing. (FOR ALL MAIN CONNECTED LOAD) BUILDING
EMERGENCY LIGHT)as per direction of Engg.-in-Charge. Warrentee
period of replacement of panel & accessories must be 5 years &
compelete test certificate must be submitted along with panel board
including component list.
In commer- 01 no 40A 4P MCB 10kA,C series with on/off trip
indication UPS Light load for each floor. ( Make-LEGRAND-Ekinox3
b DB/ Siemens-Betaguard/ Schneider- Acti 9/L&T (Equievalant
model)/Panasonic(Equivalant model) /ABB(Equivalant model)or
equievalant make with proper model ISI marked)
Busbar- 04 numbers of 40Amps,50kA Electrolytic copper busbar duly
c sleeved by color coded PVC sleeve & supported by suitable size DMC
Out going- 06 nos 25A 2P MCB 10kA,C series UPS Light load for each
area UBDB. ( Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider-
Acti 9/L&T (Equievalant model)/Panasonic(Equivalant model)
/ABB(Equivalant model)or equievalant make with proper model ISI marked)
Instrument- (i) 03 numbers phase indicating lamp with toggle switch & HRC
(ii) 01 set of 0-60Amps Ammeter with CTS.(DIGITAL)(Sicure/L&T,CT-
KAPPA or equievalant make & model)
(iii) 01 set of 0-500 voltmeter .(DIGITAL)(Sicure/L&T or equievalant make
5 MAIN PANEL GF MUSEUM
S/I/T&Commissioning of LT indoor floor mounted cubical type electrical
main panel (for both light and power circuit) made out by 2mm CRCA steel
sheet duly derusted & pented by simens gray powder cote paint is designed as
a G.A drawing as per direction of Engg.-in-Charge. Warrentee period of Set 1.00 155342.28 155342.28
replacement of panel & accessories must be 5 years & compelete test
certificate must be submitted along with panel board including component
In commer- 01 number of 630(400-630) Amps 3P MCCB with encapsulated
b double break . (make-ABB/Siemens/SCHNEIDER/L&T/Legrand, ISI
marked)(Icu=100%Ics)with shunt trip.with axulary for BMS
Busbar- 04 numbers of 300Amps Electrolytic copper busbar duly sleeved by
color coaded PVC sleeve & supported by suitable size DMC insulator. The
bus bar shpuld be provission for termination with 800A Sand width type AL.
Out going- (i) 63A 4P MCB 06 NOS FOR POWER BDB (Legrand/Schneider
make) for POWER BDB
Out going- (ii) 06 nos 32A 4P MCB LIGHT BDB AC IDU BDB/LIGHT
BDB(Legrand/Schneider make) For AC indoor BDB
Instrument- (i) 03 numbers phase indicating lamp with toggle switch & HRC
iv (ii) 01 set of 0-600Amps Ameter with selecter switch & CTS.(DIGITAL)
v (iii) 01 set of 0-500 voltmeter with selecter switch.(DIGITAL)
Digitally signed by Rakesh
BALANCE WORK FOR CONSTRUCTION OF LIBRARY WITH LIVELIHOOD HALL AND KNOWLEDGE HUB AT TALCHER
Sl.No. DESCRIPTION OF ITEM UNIT QNTY RATE Rs. AMOUNT Rs.
vi 500KVAR APFC PANEL
Supply ,installation ,testing & commissioning of 20KVA ON LINE UPS
SYSTEM WITH suitable size battery bank, rated of battery & isolation
transformer, IGBT based inverter system with inbuilt isolation transformer &
automatic phase sicuency corrector of 3ph in put to 3 ph
output,415V,protection for fault by OL,UV,EF,GF,OC,Ph. Sicuency release
of equievalant model of APC/ Schneider/ RELLIO/ Emersion or
1 equievalant reputed make A catogory, ISI marked as approved ) including Set 2.00 580609.56 1161219.12
supply of rack inverter stand with sufficient backup upto 1 hour with all
required accessories to complete the job including all connection.LOAD OF
CONFERANCE,EM. LIGHT) as per direction of Engg.-in-Charge.
Warrentee period of all accessories & component & system must be 5
years & compelete test certificate must be submitted along with ups
including component list & SLD.
CABLE TRAY /RACE WAY FOR DISTRIBUTION OF POWER
HOT DIPP GALVANIZED(GC) AS PER EN-ISO-1461 , CARBON STEEL
WIRE MESH CABLE TRAYS with internal dimensions of size 54mm(H) x
200mm(W), of Legrand - Cablofil make or equievalant reputed make &
model A catogory, ISI marked as approved .The Load bearing capacity of the
1 Cable Trays should be minimum of 104.8Kg/meter at the span of 1.5Meter mtrs 55.00 702.10 38615.50
as per UL specifications.(With all accessories,bend,cover,supporter)WITH
REQUIRED SIZED JUNCTION BOX ,COVER CONNECTOR as required
as per direction of Engg.-in-Charge. Warrentee period oftray must be 5 years
& compelete test certificate must be submitted .
HOT DIPP GALVANIZED(GC) AS PER EN-ISO-1461 , CARBON STEEL
WIRE MESH CABLE TRAYS with internal dimensions of size 54mm(H) x
300mm(W), of Legrand - Cablofil make or equievalant reputed make &
model A catogory, ISI marked as approved .The Load bearing capacity of the
2 Cable Trays should be minimum of 104.8Kg/meter at the span of 1.5Meter mtrs 55.00 814.20 44781.00
as per UL specifications.(With all accessories,bend,cover,supporter)WITH
REQUIRED SIZED JUNCTION BOX ,COVER CONNECTOR as required
as per direction of Engg.-in-Charge. Warrentee period oftray must be 5 years
& compelete test certificate must be submitted .
HOT DIPP GALVANIZED(GC) AS PER EN-ISO-1461 , CARBON STEEL
WIRE MESH CABLE TRAYS with internal dimensions of size 54mm(H) x
400mm(W), of Legrand - Cablofil make or equievalant reputed make &
model A catogory, ISI marked as approved .The Load bearing capacity of the
3 Cable Trays should be minimum of 104.8Kg/meter at the span of 1.5Meter mtrs 62.00 1077.34 66795.08
as per UL specifications.(With all accessories,bend,cover,supporter)WITH
REQUIRED SIZED JUNCTION BOX ,COVER CONNECTOR as required
as per direction of Engg.-in-Charge. Warrentee period oftray must be 5 years
& compelete test certificate must be submitted .
I 10 PASSENGER LIFT WITH WIRRING(1.1)
Design Supply, Installation, Testing & Commissioning and putting into
operation with compelete inspection by concerned electrical inspector,
Director Factory and Boilers, Odisha with proper testing certificate and
final testing of Automatic Lift complete with all standard equipments
accessories and control equipments as per Manufacturer's Design with
lift control panel including BMS facility and as per BIS and fulfilling
following requirements.It includes supply,laying of power cable and
1 fixing of glands,lugs etc.( Machine room less, Gearless Type).Design and
as per CPWD /OPWD specification (Part - III Lifts) 1981 with valid
lisence for installation and fulfilling following requirements on turnkey
basis as per direction of Engg.-in-Charge. LIFT OF machineroom less
type(Make-Kone/Junction/OTIS/Schindler/Thysenkrup or equievalant
reputed make & model A catogory, ISI marked as approved )Warrentee
period of accessories & system must be 5 years & compelete test
certificate must be submitted along with Lift including component list .
Type: PASSENGER LIFT
Load: 10 PASSENGER(680KG)
Speed: 1.0-1.25 Meter Per Second.
Control: Variable voltage with variable frequency
Digitally signed by Rakesh
BALANCE WORK FOR CONSTRUCTION OF LIBRARY WITH LIVELIHOOD HALL AND KNOWLEDGE HUB AT TALCHER
Sl.No. DESCRIPTION OF ITEM UNIT QNTY RATE Rs. AMOUNT Rs.
Operation: Microsprocessor based simplex collective selective with / without
Lift Attendant.
Total Rise: About 24 Meters.
Landings: For All on same side.
Floors Served: LL,UL,2F,3F,4F,5F,6F
Signals: Digital Car Position Indicator, Car Travel direction Indicator in Car
& at all Landings.
Lift Shaft Size: About as 10 passenger lift standard, finished with Plaster.
Lift Car Size: About lift standard.
Car Entrance: Clear Opening lift standard high Protected with Car Door.
Landing Entrance: Clear Opening lift standard high Protected with Landing
Car Door: Stainless with front glass to transparent Two Panel Center opening
flush type.outer visible.
Landing Door: Mild Steel Two Panel Center opening flush type P.
Door Operation: Automatic Electric Power operated Door with in infrared
Car Interior: Stainless Steel Panel with Hair line finish on all sides.
Car Floor: Hard Wood covered with PVC / Marblex Tiles.
Car Ceiling & Lighting: Fluorescent Lighting Concealed by suspended false
ceiling with plain acrylic diffiuser. The frame of suspended false ceiling shall
be of powder coated Aluminum.
Car Ventilation: Pressure Fan with anodized Aluminum Grill.
Emergencing Lighting in Car: Battery operated Emergencing Lighting in the
Intercom System: Battery operated intercom system in Lift Car and Control
Emergencing Alarm: Battery operated Alarm Bell System in Lift Car and
Position of Machine Room: Directly above the Lift Shaft.
Electric Power Supply: AC 415 Volt 3 Phase 50 Hz terminated in control
room along with control panel with facility of BMS connectivity system .The
scope of lift control panel is inclussive with lift vender scope.
OTHER SPECIAL PROVISIONS
• VVVF CONTROLLER
• AUTOMATICE RESCUE DEVICE (ARD)
• EMERGENCY LIGHT AND BATARY OPERATED ALARAM BELL
• DOT MATRICKX SEVEN SIGMENT DIGITAL POSITION
• FIRE RATED DOOR FOR 1 HOUR
• 3 WAY INTER COM/PRESS AND SPEAK BUTTON WITH HAND SET
• FLOOR ANNUNCIATOR WITH MUSIC
• INFRA RED SCREEN
• OVER LOAD WARNING INDICATOR
• BRAILLE BUTTONS
• FREE SERVICE FOR 5 YEARS
• FULL CAR HEIGH CAR FIXTURE ARRIVAL CHIME
• PROVISION FOR CC CEMARA WITH INSTRUEMENT
i Fire Man Switch: Fire Man Switch at Main Landing Terminal. JOB 2.00 1402966.90 2805933.80
J-800A,400A BUS DUCT SYSTEM WITH ALL ACCESSORIES & TAP
OFF BOX(MDB MUSEUM TO EACH FLOOR)
800A 415V 25KA 3P 4W 100% N IP54 after fixing plug in box, Aluminium
conductor Sandwich Busduct with 130A/sqcm of L&T/SChneider/Legrand
or equievalant reputed make & model A catogory, ISI marked as approved
completely Type Tested at NABL Accredited Laboratories as per latest IEC
61439 - 1&6 (Type Test Certificates must be submitted). Busbar to be
1 insulated with multilayered Class F (155 Deg C) PET insulation. Mica MTR 6.00 20768.00 124608.00
insulation not allowed due to its brittle nature. Complete with End Flange -
RO , Bends - RO,Plug in Boxes - RO, External Earth Strip 2x50x6 - RO,
Adaptor Box - RO , Copper Flexibles - RO, Supporing structures as per the
direction of Engg-in-charge. (FOR MDB TO FDB)Warrentee period must
be 5 years & compelete test certificate must be submitted .
1.1 INSTALLATION OF ABOVE LS 1.00 18691.20 18691.20
Digitally signed by Rakesh
BALANCE WORK FOR CONSTRUCTION OF LIBRARY WITH LIVELIHOOD HALL AND KNOWLEDGE HUB AT TALCHER
Sl.No. DESCRIPTION OF ITEM UNIT QNTY RATE Rs. AMOUNT Rs.
630A 415V 25KA 3P 4W 100% N IP54 after fixing plug in box, Aluminium
conductor Sandwich Busduct with 130A/sqcm of L&T/SChneider/Legrand
or equievalant reputed make & model A catogory, ISI marked as approved
completely Type Tested at NABL Accredited Laboratories as per latest IEC
61439 - 1&6 (Type Test Certificates must be submitted). Busbar to be
1 insulated with multilayered Class F (155 Deg C) PET insulation. Mica MTR 6.00 19942.00 119652.00
insulation not allowed due to its brittle nature. Complete with End Flange -
RO , Bends - RO,Plug in Boxes - RO, External Earth Strip 2x50x6 - RO,
Adaptor Box - RO , Copper Flexibles - RO, Supporing structures as per the
direction of Engg-in-charge. (FOR MDB TO FDB)Warrentee period must
be 5 years & compelete test certificate must be submitted .
1.1 INSTALLATION OF ABOVE LS 1.00 17947.80 17947.80
400A 415V 25KA 3P 4W 100% N IP54 after fixing plug in box, Aluminium
conductor Sandwich Busduct with suitable 130A/sqcm of
L&T/SChneider/Legrand or equievalant reputed make & model A
catogory, ISI marked as approved completely Type Tested at NABL
Accredited Laboratories as per latest IEC 61439 - 1&6 (Type Test Certificates
must be submitted). Busbar to be insulated with multilayered Class F (155
Deg C) PET insulation. Mica insulation not allowed due to its brittle nature.
Complete with End Flange - RO , Bends - RO,Plug in Boxes - RO, External
Earth Strip 2x50x6 - RO, Adaptor Box - RO , Copper Flexibles - RO,
Supporing structures as per the direction of Engg-in-charge. (FOR MDB TO
FDBL/DROP FDB P)Warrentee period must be 5 years & compelete test
certificate must be submitted .
2.1 INSTALLATION OF ABOVE LS 1.00 17841.60 17841.60
200A 415V 25KA 3P 4W 100% N IP54 after fixing plug in box, Aluminium
conductor Sandwich Busduct with suitable of 130A/sqcm
L&T/SChneider/Legrand or equievalant reputed make & model A catogory,
ISI marked as approved completely Type Tested at NABL Accredited
Laboratories as per latest IEC 61439 - 1&6 (Type Test Certificates must be
submitted). Busbar to be insulated with multilayered Class F (155 Deg C)
PET insulation. Mica insulation not allowed due to its brittle nature.
Complete with End Flange - RO , Bends - RO,Plug in Boxes - RO, External
Earth Strip 2x50x6 - RO, Adaptor Box - RO , Copper Flexibles - RO,
Supporing structures as per the direction of Engg-in-charge.(drop emergency
panel of floor) Warrentee period must be 5 years & compelete test
certificate must be submitted .
3.1 INSTALLATION OF ABOVE LS 1.00 7965.00 7965.00
Supplying, installation, testing & commisioning of following capacity Plug
In/ tap off box on the existing rising mains for use on 3 phase 4wire 415
volts, 50Hz A.C. supply made with 1.6mm thick sheet steel enclosure (IP54)
duly powder coated without MCCB ( complete etc. as required,as per the
direction of Engg-in-charge .Make-L&T/SChneider/Legrand or equievalant
reputed make & model A catogory, ISI marked as approved completely Type
Tested at NABL Accredited Laboratories as per latest IEC 61439 - 1&6
(Type Test Certificates must be submitted). Busbar to be insulated with
multilayered Class F (155 Deg C) PET insulation.Warrentee period must be 5
years & compelete test certificate must be submitted .
iii 630A 30kA SC for 1 sec EACH 1.00 17604.42 17604.42
iv 63A 30kA SC for 1 sec EACH 1.00 7502.44 7502.44
TOTAL AMOUNT- ELECTRICAL WORK 1,04,95,477.59
TOTAL AMOUNT- ELECTRICAL WORK 1,04,95,477.59
FIRE FIGHTING & FIRE ALARAM WORK
A PUMPS AND APPURTENANCES
Supply & Laying of XLPE power cable of 1.1 KV grade of following size on
Cable all complete as per specification & direction of E.I.C.
Supplying instalaltion hot dip galvanized ladder type cable tray of following
size including installation along wall/ suspended from ceiling with brackets/
threaded suspenders including bends etc as required as per specification &
direction of E.I.C.
a) 150 mm (W) X 50 mm (H) with 1.2 mm thick sheet Mtr 88 1,117.46 98,336.48
Digitally signed by Rakesh
BALANCE WORK FOR CONSTRUCTION OF LIBRARY WITH LIVELIHOOD HALL AND KNOWLEDGE HUB AT TALCHER
Sl.No. DESCRIPTION OF ITEM UNIT QNTY RATE Rs. AMOUNT Rs.
b) 450 mm (W) X 50 mm (H) with 1.6 mm thick sheet Mtr 88 2,465.02 2,16,921.76
Laying & fixing of one no. PVC insulated and PVC sheathed/XLPE power
3 cable of 1.1 KV grade of following size on Cable Tray as required as per
specification & direction of E.I.C.
b) Above 35 Sqmm and upto 95 sqmm Mtr 98 87.32 8,557.36
End Termination
Supply & Making end Termination with brass compression gland and
4 aluminium lugs for PVC insulated and PVC sheathed cable of 1.1 kv grade -
(without cost of Cable) all complete as per specification & direction of E.I.C.
B PIPE & VALVES ETC.
Supply,Installation,Testing & Commissioning of 'C' Class heavy duty MS
pipe (as per IS 1239 upto 150 mm NB and IS 3589 for above 150 mm 6mm
thick) with flanges and fitting such as bends, tees, reducers, rubber insertions
and galvanized nuts and bolts of following size on surface along wall / shaft
with MS bracket, suspended from ceiling/ beam with suspenders duly painted
with two coats of primer and finished with enamel paint of approved colour
laid through pipe or in trench after wrapping with hassen cloth after applying
coal tar primer as required as per direction of Engineer-in- charge.
Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe
conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts
bolts, gaskets etc. in ground including welding, excavation & providing
cement concrete blocks as supports, anticorrosive treatment with
coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes
complete as required.
Providing, fixing, testing and commissioning of following size manually
operated hand lever type cast iron double flanged slim seal wafer type
Butterfly valves with EPDM iron disc as per IS-13095 having pressure ratting
7 PN -1.60 including fixing the same with supply of required jointing materials
like rubber insertion, MS nuts & bolts, paint etc. and testing the joints with
required water pressure etc. all complete as per specification & direction of
Providing, fitting & fixing of following size cast iron double flanged type
dual plate Non return Valve as per IS- 5312 (Part 1): 2004 with ISI mark of
pressure ratting PN-1.60 including fixing the same with supply of required
jointing materials like flanges, rubber insertion, MS nuts & bolts, paint etc.
and testing the joints with required water pressure etc. all complete as per
specification & direction of Engineer-in-charge.
Supply,Installation,Testing & Commissioning of Pressure gauge of 0-16
9 Kgf/sq.cm. range with cut-off bronze ball valves of suitable size with all Nos 2 2,472.63 4,945.00
accessories as per direction of Engineer-in-charge.
Supply,Installation,Testing & Commissioning of Pressure Switch with cut-off
10 bronze ball valves with integral strainer & flare nut (mixed ends) of suitable Nos 2 2,569.53 5,139.00
size with all accessories as per direction of Engineer-in-charge.
Providing, installation, testing and commissioning of stainless steel Y-strainer
11 fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia
holes with stainless steel flange
Digitally signed by Rakesh
BALANCE WORK FOR CONSTRUCTION OF LIBRARY WITH LIVELIHOOD HALL AND KNOWLEDGE HUB AT TALCHER
Sl.No. DESCRIPTION OF ITEM UNIT QNTY RATE Rs. AMOUNT Rs.
Supply,Installation,Testing & Commissioning of Air vessel made of 250mm
dia, 8mm thick MS sheet, 1200 mm in height with air release valve on top
12 and flanged connection to riser, drain arrangement with 25 mm dia Gun metal Nos 1 30,806.99 30,807.00
wheel valve, with required accessories, pressure gauge and painting with
synthetic enamel paint as required as per specification & direction of E.I.C.
C WET RISER CUM DOWN COMER SYSTEM
Supplying and fixing single headed internal hydrant valve with instantaneous
Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI
marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel
cap and chain as required as per specification & direction of E.I.C.
Supply,Installation,Testing & Commissioning of SS short branch pipe with 63
14 mm male inlet and 19 mm outlet nozzle, as per IS:903 and as per direction of Nos 8 3,031.15 24,249.00
Engineer-in-charge.
Supply,Installation,Testing & Commissioning of 63 mm NB and 15meter
long RRL Fire Hose fitted 63mm intstantaneous stainless steel male &
female SS coupling, complete by GI wire binding for Internal Hydrant as per
direction of Engineer-in-charge.
Providing supply & fixing of MS Hose Box for of suitable
size(750X600X250mm) to accomodate 2 nos. of 15/ 1 no of 30 mtr long fire
hose and a branch pipe, wall mounted type as per direction of Engineer-in-
Supply,Installation,Testing & Commissioning of Swinging pattern wall fixing
first aid hose reel made from MS sheet and waterways and moving parts with
17 rubber hose of 20 mm dia. and 30 mtrs. long with ABS(Plastic) shut-off Nos 3 8,351.83 25,055.00
nozzle as per IS: 444/IS: 12585 Type-I., complete with all accessories as per
direction of Engineer-in-charge.
Providing, fitting and fixing of C.I. 25 MM single air relief valve with stop
cock confirming to IS:14845/2000 with ISI mark for water works purpose
18 including fixing the same with hydrant riser including testing & Nos 4 2,278.83 9,115.00
commissioning the system etc. all complete as per approved specification &
direction of Engineer-in-charge.
Providing, fitting & fixing of 4-Way GM fire brigade connection consisting of
63 mm dia instantaneous type male couplings with built-in check valves,
19 150mm dia flanged outlet complete with bolts, nuts and rubber insertions Nos 1 19,776.78 19,777.00
confirming to IS:904 with ISI mark including testing & commissioning the
system etc. all complete as per apporoved specification & direction of EIC.
D SPRINKLER SYSTEM
Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type
20 sprinklers of rating 68 degree centigrade with required accessories :Pendent / Nos 45 590.02 26,551.00
Upright Sprinkler complete as per specification & direction of E.I.C.
Providing & fixing of Water Flow Switch switable for pipe 100 mm
21 Diameter with all accessories for all floors etc. all complete as per direction Nos 3 8,820.23 26,461.00
of Engineer-in-charge.
Providing, laying, testing & commissioning of Flexible Sprinkler Hose
Corrugated Unbraided type of length 1mtr for Fire Sprinklers, with 1'' Inlet
22 Nipple BSPT,1/2" Outlet Reducer BSPT,0.7 m Square Supports Bar & Nos 34 1,979.83 67,314.00
Brackets(UL Listed) with all complete accessories as per direction of
Engineer-in-charge.
E EXTINGUISHER SYSTEM
Portable Fire Extinguisher System Supplying, installation, testing and
commissioning of CO2 type Fire Extinguisher 4.5 kg capacity confirming to
IS: 2878 made from ISI marked seamless cylinder confirming to IS: 7285,
fitted with ISI marked controlled valve confirming to IS: 3224, high pressure
1mtr discharge hose & horn complete with initial gas charged with carrying
handle & wall mounting bracket as per direction of Engineer-in-charge.
Supplying, installation, testing and commissioning of ABC type fire
24 extinguishers of 6 kg capacity including cost of all material & labour etc Nos 6 5,246.28 31,478.00
Supplying, installation, testing and commissioning of Mechanical Foam type
9 litre capacity Fire Extinguisher, ISI marked, IS: 10204, containing 540 ml
AFFF liquid ISI marked, IS: 4989 Part II and a polyurethane coated CO2 Gas
Cartridge, ISI marked, IS: 4947 complete with gunmetal union cap, nylon
hose with plastic foam making branch and wall mounting bracket as per
direction of Engineer-in-charge.
F AUTOMATIC FIRE DETECTION SYSTEM
Digitally signed by Rakesh
BALANCE WORK FOR CONSTRUCTION OF LIBRARY WITH LIVELIHOOD HALL AND KNOWLEDGE HUB AT TALCHER
Sl.No. DESCRIPTION OF ITEM UNIT QNTY RATE Rs. AMOUNT Rs.
Supplying, installation, testing and commissioning of Intelligent Combination
Heat potoelectric Smoke Detector, Intelligent Combination Heat
Photoelectric Smoke Detector, With Remote Indicator Output and Magnetic
26(a) Test Function, Without base (Certified by LPCB) Common Detector Base, Nos 45.00 4,843.92 2,17,976.00
Common Detector Base for DI-910xE Series Detectors and for DC-910xE
series Detectors using EOLR complete as per specification & direction of
Supply Installation testing and commissioning of Loop Realay Module,
b) Extend Loop Distance and Increase Current Capacity, 24VDC required. as Nos 1.00 48,792.34 48,792.00
per specification & direction of E.I.C.
27 CONTROL PANEL -
Supplying, installation, testing & commissioning of Addressable Single
Output Module,Single Input Module, provides dry contact (Loop powered) or
a) active Input (24VDC required, cable monitored) (Certified by LPCB) Nos 6.00 7,134.83 42,809.00
complete as per specification & direction of E.I.C.
Supplying, installation, testing & commissioning of Addressable Single
Output Module,Single Output Module, provides dry contact (Loop powered)
b) or active output (24VDC required, cable monitored) (Certified by LPCB) NOS 6.00 7,134.83 42,809.00
complete as per specification & direction of E.I.C.
Supplying, installing ,testing and commissioning of Digital Manual Call
Point, Flush mount Resettable (Non-Breaking Glass), Supplied with surface
a) mount back box and Special Reset Key, Optional Accossories:4556356, Each 10.00 6,321.05 63,210.53
4556520(Certified by LPCB) complete as per specification & direction of
29 Electronic Hooters -
Supplying, installing ,testing and commissioning of Intelligent Sounder
Strobe, Addressable Sounder with Visible Indicator, 16 tones, high/low
consumption modes, can be loop owered or 24VDC powered, 83-89dB
(Certified by LPCB) complete as per specification & direction of E.I.C.
Supplying & laying of 2x1.5 sqmm fire alarm armoured cable,600/1000V
rated with annealed copper conductor having XLPE insulation, steel wire
armouring & FRLS outer sheath complete as required complete as per
specification & direction of E.I.C.
Supplying and fixing metal box of following sizes (nominal size) on surface
or in recess with suitable size of phenolic laminated, sheet cover in front
including painting etc. as required. 100 mm X 100 mm X 60 mm deep
complete as per specification & direction of E.I.C.
G PUBLIC ADDRESS SYSTEM -
Supplying, installation, testing & commissioning of ceiling/wall mounted
31 loud speaker, 3/15 Watt in ABS enclosure complete as required as per Nos 30.00 2,346.81 70,404.40
specification & direction of E.I.C.
Supplying and drawing of speaker cable Single pair, 2-core, 1.5 sqmm
complete as per specification & direction of E.I.C.
Providing and installing in position the following type of sign boards made
out of 3mm thick "Opaque" PVC foam board with computer cut, PVC non-
reflective self adhesive vinyle painted foam board, complete with mirror
fasteners complete as per specification & direction of E.I.C.
Floor indentification signage ( ie, GROUND FLOOR …etc.) at each stair
enclosure on every floor, indicating the floor number in words, lettering size
shall be 7.5 cm with contrasting colour from back ground.Size shall be 15cm
x 60cm complete as per specification & direction of E.I.C.
Providing and fixing the signages "Fire Exit, Fire Exit Arrow Down,Fire Exit
Arrow Left,Fire Exit Arrow Right" of 1.5in height letters in white with green
back ground.The size of the board shall be 25cm x 15 cm and shall be fixed at
the height of 2 mts complete as per specification & direction of E.I.C.
Providing and fixing the signages "In case of fire pull down - with Manual
c call point symbol ". Size 6" x 8" complete as per specification & direction of Nos 60.00 954.74 57,284.34
Providing and fixing the signages "Main fire alarm panel." Size 6" x 8"
complete as per specification & direction of E.I.C.
Digitally signed by Rakesh
BALANCE WORK FOR CONSTRUCTION OF LIBRARY WITH LIVELIHOOD HALL AND KNOWLEDGE HUB AT TALCHER
Sl.No. DESCRIPTION OF ITEM UNIT QNTY RATE Rs. AMOUNT Rs.
Providing and fixing the signages "In case of fire, Do not use Lift, Use Stair -
with symbol." Size 8" x 8" complete as per specification & direction of E.I.C.
Providing and fixing of Illumination Glow light for Exit Indication with
Battery Back-up complete as per specification & direction of E.I.C.
i Fire supression system 0.00
Supply & Laying of Linear pneumatic heat Detection Tube with all necessary
fittings & supports complete as per specification & direction of E.I.C.
Supply, installation, testing and commissioning of Healthy Monitoring Panel
with Audio Visual Alarm. The Panel Should have Provision for integration
with Fire Alarm/ SCADA/ BMS System.(Make: SUPREMEX /SVS or
equivalent) complete as per specification & direction of E.I.C.
TOTAL AMOUNT:FIRE FIGHTING & FIRE ALARAM WORK 34,44,018.74
TOTAL AMOUNT:FIRE FIGHTING & FIRE ALARAM WORK 34,44,018.74
SERVICE BLOCK-INTERNAL WORK
A Sub-Head I (modular Wiring Items)
Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point
with 1.5 sq.mm FRLSH/LSZH PVC insulated copper conductor of ISI
marked Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI or
equievalant reputed make A catagory ISI marked as approved with 20
mm dia PVC flexible non metallic conduit FRLS type ISI marked Make-
AKG/Anchor/Havells or equievalant reputed make A catagory ISI
marked as approved 6A modular type (anti bactorial & falme retradant
type) switch ISI marked Make-Schneider(Zencelo)/legrand( Arteor)
/Panasonic (vision) or equievalant reputed make & model A catagory ISI
marked as approved, and ceiling rose ISI marked Make- Anchor/Havells
of modular type G.I box with metallic cover plate (both side) (anti bactorial &
falme retradant type) Make-Schneider(Zencelo)/legrand( Arteor)
/Panasonic (vision)or equievalant reputed make & model A catagory ISI
marked as approved of suitable size, modular box with 1.5 sq. Mm FRLSH
PVC insulated single core multistandard copper conductor as earth wire
including all accessories and connection as per direction of Engineer -in -
Charge. CATAGORY AS FOLLOWS ,complete suitable for STADIUM.
All the switches & sockets should be warrantied for a replacement period
of 10 years against defects with ncessary test report & Warrnaty
certificate to be submitted to the department for genuinity of product &
to avail free after sales service within warranty period for acceptance of
Digitally signed by Rakesh
BALANCE WORK FOR CONSTRUCTION OF LIBRARY WITH LIVELIHOOD HALL AND KNOWLEDGE HUB AT TALCHER
Sl.No. DESCRIPTION OF ITEM UNIT QNTY RATE Rs. AMOUNT Rs.
Group control of point in Recessed wirring to light point/ fan point/ exhaust
fan point/ call bell point with 1.5 sq.mm FRLSH/LSZH PVC insulated copper
conductor of ISI marked Make- Make-
Finolex/Anchor/Polycab/HAVELLS or equievalant reputed make A
catagory ISI marked as approved as approved 20 mm dia PVC flexible
non metallic conduit FRLS type ISI marked Make-AKG/Anchor/Kinjal or
equievalant reputed make A catagory ISI marked as approved with 6A
modular type((anti bactorial & falme retradant type)) switch ISI marked
Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision) or
equievalant reputed make & model A catagory ISI marked as approved,
and ceiling rose ISI marked Make-Schneider(Zencelo)/legrand( myrius)
/Panasonic (Equievalant model) or equievalant reputed make & model A
b) catagory ISI marked as approved of modular type G.I box with metallic Nos 15.00 221.84 3327.60
cover plate (both side)(anti bactorial & falme retradant type) Make-
Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision)or equievalant
reputed make & model A catagory ISI marked as approved, of suitable
size, modular box with 1.5 sq. Mm FRLS PVC insulated single core
multistandard copper conductor as earth wire including all accessories and
connection as per direction of Engineer -in -Charge. CATAGORY AS
FOLLOWS ,complete suitable for STADIUM.(Maximum 02 nos point in
one circuit).All the switches & sockets should be warrantied for a
replacement period of 10 years against defects with ncessary test report
& Warrnaty certificate to be submitted to the department for genuinity of
product & to avail free after sales service within warranty period for
acceptance of materials.
Group control of point in existing false ceiling wirring to light point/ fan
point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLSH/LSZH PVC
insulated copper conductor of ISI marked Make-
Make- Finolex/Anchor/Polycab/HAVELLS or equievalant reputed make
A catagory ISI marked as approved as approved with 20 mm dia steel
conduit ISI mark metallic conduit ISI marked Make-
AKG/Anchor/Kinjal or equievalant reputed make A catagory ISI marked
as approved with 6A modular type((anti bactorial & falme retradant
type)) switch ISI marked Make-Schneider(Zencelo)/legrand( Arteor)
/Panasonic (vision) or equievalant reputed make & model A catagory ISI
marked as approved, and ceiling rose ISI marked Make-
Schneider(Zencelo)/legrand( myrius) /Panasonic (Equievalant model) or
c) equievalant reputed make & model A catagory ISI marked as approved of Nos 12.00 670.24 8042.88
modular type G.I box with metallic cover plate (both side)(anti bactorial &
falme retradant type) Make-Schneider(Zencelo)/legrand( Arteor)
/Panasonic (vision) or equievalant reputed make & model A catagory ISI
marked as approved, of suitable size, modular box with 1.5 sq. Mm FRLS
PVC insulated single core multistandard copper conductor as earth wire
including all accessories and connection as per direction of Engineer -in -
Charge. CATAGORY AS FOLLOWS ,complete suitable for
STADIUM.(Maximum 02 nos point in one circuit).All the switches &
sockets should be warrantied for a replacement period of 10 years
against defects with ncessary test report & Warrnaty certificate to be
submitted to the department for genuinity of product & to avail free
aftersales service within warranty period for acceptance of materials.
Supplying ,fixing of 6A Plug on the same board in existing switch board with
complete fitting by 01 no of 6A switch & socket (modular type)( (anti
bactorial & falme retradant type)) & other required accessories of ISI
marked as approved as per direction of Engg. -in -Charge. Make-
Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision) or equievalant
d) reputed make & model A catagory ISI marked as approved, complete Nos 8.00 226.56 1812.48
suitable for for STADIUM.(Maximum 02 nos point in one circuit).All the
switches & sockets should be warrantied for a replacement period of 10
years against defects with ncessary test report & Warrnaty certificate to
be submitted to the department for genuinity of product & to avail free
aftersales service within warranty period for acceptance of materials.
Digitally signed by Rakesh
BALANCE WORK FOR CONSTRUCTION OF LIBRARY WITH LIVELIHOOD HALL AND KNOWLEDGE HUB AT TALCHER
Sl.No. DESCRIPTION OF ITEM UNIT QNTY RATE Rs. AMOUNT Rs.
Supplying,fixing of 6A Plug on the separate board with complete fitting by
01 no of 6A switch & socket(modular type)( (anti bactorial & falme
retradant type)) with suitable size modular box & cover(anti bactorial &
falme retradant type) including supplying of all required accessories of ISI
marked as approved as per direction of engg-in-charge..Make-
Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision) or equievalant
e) make & model ISI marked as approved , complete suitable for Nos 10.00 591.18 5911.80
STADIUM.(Maximum 02 nos point in one circuit).All the switches &
sockets should be warrantied for a period of 10 years against
manufacturing defects against which ncessary test report & Warrnaty
certificate to be submitted to the department for genuinity of product &
to avail free aftersales service within warranty period for acceptance of
Supplying,fixing of 1x16A Plug on the separate board with complete fitting
by 01 no of 16A switch & socket(modular type)((anti bactorial & falme
retradant type)) with suitable size modular box & cover(anti bactorial &
falme retradant type) including supplying of all required accessories of ISI
marked as approved as per direction of engg-in-charge.. Make-
Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision)or equievalant
reputed make A catagory ISI marked as approved, (For equipement
power)All the switches & sockets should be warrantied for a replacement
period of 10 years against defects with ncessary test report & Warrnaty
certificate to be submitted to the department for genuinity of product &
to avail free aftersales service within warranty period for acceptance of
Supplying,fixing of 1x6A+1X1 6A Plug on the separate board with complete
fitting by 01 no of 16A+1 no 6A switch & socket(modular type) ( (anti
bactorial & falme retradant type) with suitable size modular box & metallic
cover plate (both side)(anti bactorial & falme retradant type)including
supplying of all required accessories of ISI marked as approved as per
direction of engg-in-charge..Make-Schneider(Zencelo)/legrand( Arteor)
g) /Panasonic (vision)or equievalant reputed make & model A catagory ISI Nos 4.00 1471.46 5885.84
marked as approved, (For equipement power)complete suitable for for
STADIUM.(Maximum 02 nos point in one circuit).All the switches &
sockets should be warrantied for a replacement period of 10 years
against defects with ncessary test report & Warrnaty certificate to be
submitted to the department for genuinity of product & to avail free
aftersales service within warranty period for acceptance of materials.
Receass wiring for circuit/submain wiring with the following mentioned size
PVC FRLSH/LSZH insulated, copper conductor, single core cable
(Finolex/Anchor/Polycab/ HAVELLS/RR KEBLE) or equievalant reputed
make A catagory ISI marked as approved, in recessed PVC conduit Heavy
2 duty FRLS of mentioned size (AKG/Anchor/Kinjal or equievalant ISI
marked as approved) as required as per direction of Engg.-in-Charge.
Ncessary test report & Warrnaty certificate to be submitted to the department
for genuinity of product & to avail free after sales service within warranty
period for acceptance of materials
2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of
single core 1.5 sq. mm copper wire for earth continuty conductor. In 20 mm
dia non metallic heavy duty flexible conduit (LDB to LSB/LIGHT
2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of
single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm
dia non metallic heavy duty flexible conduit.(BDB to LSB/LIGHT CKT/5A
PLUG/INVERTER POINT TO EACH QTR) (2X2.5+1X1.5)
4 nos single core 2.5 sq. mm copper wire for phase and neutral and 02 nos
of single core 2.5 sq. mm copper wire for earth continuty conductor .in 25
mm dia non metallic heavy duty flexible conduit(LDB to LSB/5A SOCKET)
2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of
single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm
d) dia non metallic heavy duty flexible conduit .(PDB to PSB/ GAYSER Mtr 21.00 186.44 3915.24
POINT/AC POINT/ROOM LIGHT CONTROL TO CORRIDOOR
POINT/DG PANEL ESSENTIAL LOAD) (2X4+1X1.5)
Digitally signed by Rakesh
BALANCE WORK FOR CONSTRUCTION OF LIBRARY WITH LIVELIHOOD HALL AND KNOWLEDGE HUB AT TALCHER
Sl.No. DESCRIPTION OF ITEM UNIT QNTY RATE Rs. AMOUNT Rs.
4 nos single core 4 sq. mm copper wire for phase and neutral and 02 nos of
single core 2.5 sq. mm copper wire for earth continuty conductor in 32 mm
e) dia non metallic heavy duty flexible conduit.(PDB to PSB/GAYSER. Mtr 12.00 284.38 3412.56
POINT/AC POINT/DG PANEL ACCL TO EACH QTR ESSENTIAL
LOAD) (4X4+2X2.5)
2 nos single core 6 sq. mm copper wire for phase and neutral and 01 no of
single core 2.5 sq. mm copper wire for earth continuty conductor in 25 mm
dia non metallic heavy duty flexible conduit .(LFDB TO LBDB)
4 nos single core 6 sq. mm copper wire for phase and neutral and 02 nos of
single core 2.5 sq. mm copper wire for earth continuty conductor in 32 mm
dia non metallic heavy duty flexible conduit.(LFDB TO LBDB/power
unit/point) (4X6+2X2.5)
4 nos single core 10 sq. mm copper wire for phase and neutral and 02 nos of
single core 4 sq. mm copper wire for earth continuty conductorin 32 mm dia
non metallic heavy duty flexible conduit .(LFDB TO FLOOR PANEL TO
TPN BDB light ) (4X10+2X4)
4 nos single core 16 sq. mm copper wire for phase and neutral and 02 nos of
single core 10 sq. mm copper wire for earth continuty conductor in 40 mm dia
non metallic heavy duty flexible conduit.(FLOOR PANEL TO TPN BDB
power) (4X16+2X10)
Supplying and fixing 20 amps, 240 volts, SPN, industrial type socket outlet,
with 2 pole and earth metal enclosed plug top along with 32 amps. C-series,
SP MCB, in sheet steel enclosure, on surface or in recess, with chained metal
cover for the socket outlet, and complete with connections, testing and
commissioning etc. as required as per direction of Engg.-in-Charge.. . Make-
3 Legrand/Schneider/Siemens/panasonic or equievalant reputed make & Nos 4.00 715.08 2860.32
model A catagory ISI marked as approved,All the Components should be
warrantied for a replacement period of 5 years against defects with
ncessary test report & Warrnaty certificate to be submitted to the
department for genuinity of product & to avail free aftersales service
within warranty period for acceptance of materials.
Supplying and fixing 32 amps, 415 volts, TPN, industrial type socket outlet,
with 4 pole and earth metal enclosed plug top along with 32 amps. C-series,
TP MCB, in sheet steel enclosure, on surface or in recess, with chained metal
cover for the socket outlet, and complete with connections, testing and
commissioning etc. as required as per direction of Engg.-in-Charge.. .
Equievalant higher model of Make-
Legrand/Schneider/Siemens/panasonic equievalant reputed make &
model A catagory ISI marked as approved.All the Components should be
warrantied for a replacement period of 5 years against defects with ncessary
test report & Warrnaty certificate to be submitted to the department for
genuinity of product & to avail free aftersales service within warranty period
for acceptance of materials.
Supplying and fixing following size/ modules, GI box along with modular
base & metallic cover plate (both side)(anti bactorial type) plate for modular
switches in recess etc as required as per direction of Engg.-in-Charge. MAKE-
Legrand/Siemens/Anchor/Panasonic/ Schneider or equievalant reputed
5 make & model A catagory ISI marked as approved .All the Components
should be warrantied for a replacement period of 5 years against defects
with ncessary test report & Warrnaty certificate to be submitted to the
department for genuinity of product & to avail free aftersales service
within warranty period for acceptance of materials.
Supplying and fixing of following sizes of medium class PVC FRLS conduit
ISI marked along with accessories in surface/recess including cutting the wall
6 and making good the same in case of recessed conduit as required as per
direction of Engg.-in-Charge .MAKE KINJAL/ AKG/Anchor or
equievalant reputed make A catagory ISI marked as approved
Digitally signed by Rakesh
BALANCE WORK FOR CONSTRUCTION OF LIBRARY WITH LIVELIHOOD HALL AND KNOWLEDGE HUB AT TALCHER
Sl.No. DESCRIPTION OF ITEM UNIT QNTY RATE Rs. AMOUNT Rs.
Supply and fixing modular type indicator on the existing switch box/cover .
Equievalant higher model of Schneider/Hager/Siemens/Anchor/Panasonic
make or equievalant reputed make & model A catagory ISI marked as
approved as required as per direction of Engg.-in-Charge.All the Components
should be warrantied for a replacement period of 5 years against defects
with ncessary test report & Warrnaty certificate to be submitted to the
department for genuinity of product & to avail free aftersales service within
warranty period for acceptance of materials.
Supplying and installation of AC starter Modular type, Equievalant higher
model of Schneider/Hager/Siemens/Anchor/Panasonic make or
equievalant reputed make & model A catagory ISI marked as approved coil
voltage-415 Volt A.C. & O/L range of 9-14A range on mod Box of suitable
8 size including modular coveras required as per direction of Engg.-in-Charge Nos 5.00 728.06 3640.30
.All the Components should be warrantied for a replacement period of 5 years
against defects with ncessary test report & Warrnaty certificate to be
submitted to the department for genuinity of product & to avail free aftersales
service within warranty period for acceptance of materials.
Supply and fixing CALL bell (Ding dong type) /Buzzer on the existing switch
box/cover. Equievalant higher model of
Schneider/Hager/Siemens/Anchor/Panasonic make or equievalant
reputed make & model A catagory ISI marked as approved .as required as
9 per direction of Engg.-in-Charge.All the Components should be warrantied Nos 2.00 239.54 479.08
for a replacement period of 5 years against defects with ncessary test report
& Warrnaty certificate to be submitted to the department for genuinity of
product & to avail free aftersales service within warranty period for
acceptance of materials.
S/F of Bakelite angle holder/batten holder (make-
Anchor/Havells/Panasonic or equievalant reputed make A catagory ISI
marked as approved )of ISI marked conforming to IS-1258/1987 in place of
ceiling rose as per direction of Engg.-in-Charge .All the Components should
be warrantied for a replacement period of 5 years against defects with
ncessary test report & Warrnaty certificate to be submitted to the department
for genuinity of product & to avail free aftersales service within warranty
period for acceptance of materials.
Supplying,fixing of Blanking plate(modular type)( (anti bactorial & falme
retradant type)) in existing switch box(anti bactorial & falme retradant
type) including supplying of all required accessories of ISI marked as
approved as per direction of engg-in-charge..Make-
Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision), complete
suitable for IPH standard hospital.It should be warrantied for a period of
10 years against manufacturing defects against which ncessary test
report & Warrnaty certificate to be submitted to the department for
genuinity of product & to avail free aftersales service within warranty
period for acceptance of materials.
Sub-Head II (Light fitting Fixture & Fan)(only basic required fittings)
Supplying, installation, of exhaust fan of heavy duty 300 mm sweep (Make-
Equievalant higher model with 5 star rated of
Havells/almonard/Anchor/Panasonic/Usha or equievalant reputed make
& model A catagory ISI marked as approved ) of exhaust fan in the
existing wall, including fixing & conntection as required as per direction of
Engg.-in-Charge. Replacement Warranty will be 5 years.
Supplying, installation, of exhaust fan of heavy duty 380 mm sweep 1400 rpm
with louvers Make-Equievalant higher model with 5 star rated of
Havells/almonard/Anchor/Panasonic/Usha or equievalant reputed make
& model A catagory ISI marked as approved ) of exhaust fan in the
existing wall, including fixing & conntection .as required as per direction of
Engg.-in-Charge. Replacement Warranty will be 5 years.
Digitally signed by Rakesh
BALANCE WORK FOR CONSTRUCTION OF LIBRARY WITH LIVELIHOOD HALL AND KNOWLEDGE HUB AT TALCHER
Sl.No. DESCRIPTION OF ITEM UNIT QNTY RATE Rs. AMOUNT Rs.
Supplying, installation, testing and commssioning of 1400 mm sweep
white/milky colour ceiling fan Make-Equievalant higher model with 5 star
rated of Havells/almonard/Anchor/Panasonic/Usha or equievalant
reputed make & model A catagory ISI marked as approved ) including
wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC
insulated, copper conductor, single core cable etc. as required.(With fan
Regulator) as required as per direction of Engg.-in-Charge.Replacement
Warranty will be 5 years.
Supplying, installation, testing and commssioning of 1200 mm sweep
white/milky colour ceiling fan Make-Equievalant higher model with 5 star
rated of Havells/almonard/Anchor/Panasonic/Ushaor equievalant
reputed make & model A catagory ISI marked as approved ) including
wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC
insulated, copper conductor, single core cable etc. as required as per direction
of Engg.-in-Charge,Replacement Warranty will be 5 years.. .(With fan
Supplying and fixing of Energy efficient 24W, High efficient surface
mounted LED round downlighter with white powder coated, pressure die cast
aluminium housing. High transmittivity PS diffuser provides soft light.
CRI>80, IP20, Ambient temp-0 to 45DegC, CCT - 4000/5700K, 50,000 hrs @
L70 life.Driver efficiency>85%, THD<10%, Powerfactor>0.9, Surge
protection-2 kV, Multistage Isolated Constant Current-Constant Voltage
operated driver with range 90-265V AC and Safety Extra Low Voltage Safe
level<60V DC as per IEC standard. Luminaire lumen ≥ 2400 lm. (100 lm/W)
Similar to Wipro Make LD06-301XXX-40SMG1or equivalent Philips/
LT/Trilux or equievalant make A Catagory,ISI marked as approved make. .as
required as per direction of Engg.-in-Charge . The luminaire must be
Replacement Warranty will be 5 years.
Supplying and fixing of Energy efficient 12W, High efficient surface
mounted LED round downlighter with white powder coated, pressure die cast
aluminium housing. High transmittivity PS diffuser provides soft light.
CRI>80, IP20, Ambient temp-0 to 45DegC, CCT - 4000/5700K, 50,000 hrs @
L70 life.Driver efficiency>85%, THD<10%, Powerfactor>0.9, Surge
protection-2 kV, Multistage Isolated Constant Current-Constant Voltage
operated driver with range 90-265V AC and Safety Extra Low Voltage Safe
level<60V DC as per IEC standard. Luminaire lumen ≥ 1200 lm. (100 lm/W)
Similar to Wipro Make LD06-151XXX-40SMG1 or equivalent Philips/
LT/Trilux make. or equievalant make A Catagory,ISI marked as approved
make. .as required as per direction of Engg.-in-Charge . The luminaire must
be Replacement Warranty will be 5 years.
Supplying and fixing of Energy efficient 30W, High efficiency
surface/suspended downlighter designed with aluminum body powder coated
in white or black and clear glass COB LED. CRI>80, IP20, Ambient temp- 0
to 45 DegC, Driver efficiency>85%, THD<20%,Powerfactor>0.9, CCT -
4000K/5700K, 50,000 hrs @ L70 life.Surge protection-2 kV, Multistage
Isolated Constant Current-Constant Voltage operated driver with range 140-
270V AC and Safety Extra Low Voltage Safe level<60V DC as per IEC
standard. Luminaire lumen ≥ 2400 lm. (80 lm/W). Similar to Wipro Make
LD30-301-36W-40-PS or equivalent Philips/ LT/Trilux make. or equievalant
make A Catagory,ISI marked as approved make. .as required as per direction
of Engg.-in-Charge . The luminaire must be Replacement Warranty will be 5
SITC of energy efficient LED tube light fittings with decorative alluminium
batten and LED tube light having power rating not more than 20 watt and
lumen output not less than 2200 lumen complete with electronic driver and
all other accessories with diffuser having 5 years warranty i/c connection etc
as required as per direction of Engg.-in-Charge. ( (Make: wipro LL20-221 --
or similar model of LT/Trilux /Philips/Panasonic or equievalantreputed
make & model A catagory ISI marked as approved.). The luminaire should
be Replacement Warranty will be 5 years .
Digitally signed by Rakesh
BALANCE WORK FOR CONSTRUCTION OF LIBRARY WITH LIVELIHOOD HALL AND KNOWLEDGE HUB AT TALCHER
Sl.No. DESCRIPTION OF ITEM UNIT QNTY RATE Rs. AMOUNT Rs.
SITC of Sleek LED 10 watt mirror light fitting with extruded polycarbonate
housing,High optically efficient diffuser,above wash basin complete with all
accessoriesetc. directly on wall, including connection with 1.5 sq. mm FRLS
PVC insulated, copper conductor, single core cable and earthing etc. as
9 required as per direction of Engg.-in-Charge. Nos 4.00 856.68 3426.72
( Make : WIPRO Model No:LL20-111-XXX-60-NE or similar model of
PHILIPS/Panasonic or equievalant reputed make & model A catagory
ISI marked as approved. )The luminaire should be Replacement Warranty
will be 5 years
Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm
dia, heavy gauge including painting etc. as requiredas required as per
10 direction of Engg.-in-Charge . Nos 33.00 36.58 1207.14
(Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm
or less shall be ignored)of ISI mark as approved.
C BDBS,DB,AC DB,FLOOR PANELS,MCBS
Supplying and fixing of following mentioned way, three pole/single pole and
neutral, sheet steel,double door MCB distribution board, 415 volts/240 volts
shall be as per IEC 61439-3,integrated door earthing system offering
additional safety to the user,High quality polyurethane Gasket,the box and
cover shall be fabricated to withstand IK09,the DB should be properly pre-
treated with 7 tank process and duly powder coated, phosphatized with
powder coated finish, on surface/recess, complete with terminal blocks,with
suitable size FR PVC insulated copper conducter up to terminal blocks,
tinned copper busbar, neutral busbar, earth bar, din bar. Make-LEGRAND-
Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti
9/Panasonic(Equivalant model) /ABB(Equivalant model) or equievalant
reputed make & model A catagory ISI marked as approved. as per direction
of Engg.-in-Charge. The Distribution boards should be Replacement
Warranty will be 5 years
4 Way(8+12) Way TPN MCB DD DB Horizontal Type as per IEC 61439-3
suitable for Flush mounting and Surface mounting with 100A Copper Bus Bar
for each phase, with neutral Bus bar, Earth Bar & Cable ties for cable
management, prefitted masking sheet, IP43-IK09 with metal door(FOR
LIGHT,POWER INDOOR,3-PH,POWER LOAD) Warranty on DB is 2
Supply and fixing of 12 way DD single pole and neutral sheet steel MCB
distribution board 250V on surface/recess complete with tinned copper bus
bar, neutral bus bar, earth bar, din bar, detachable gland plate,
b) interconnections, phosphatized and powder painted including earthing etc. as Nos 1.00 2236.10 2236.10
required (but with out MCB/ RCCB/ Isolator) (ALL LIGHT WITH
CORRIDOOR/COMMON AREA,EM LIGHT,UPS LOAD, EM LOAD
LIGHT LOAD,POWER LOAD )
2+4 way MCB Enclosure DB (GLAZED door)(only each EM.
CONNECTION UPS LOAD)
8 Way(8+24) Way TPN MCB DD DB Horizontal Type as per IEC 61439-3
suitable for Flush mounting and Surface mounting with 100A Copper Bus Bar
d) for each phase, with neutral Bus bar, Earth Bar & Cable ties for cable Nos 1.00 3176.56 3176.56
management, prefitted masking sheet, IP43-IK09 with metal door(FOR
LIGHT,POWER INDOOR,3-PH,POWER LOAD)
Supplying and fixing 20 amps rating, 240 volts, C series, Double poles MCB
of Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti
9/L&T (Equievalant model)/Panasonic(Equivalant model)
/ABB(Equivalant model) or equievalant reputed make & model A
catagory ISI marked as approved in the existing MCB DB complete with
connections as per direction of Engg.-in-Charge. The MCB should be
Replacement Warranty will be 5 years .MCB should have the fault indication
system in different colour for ON, OFF & TRIP condition or Mid trip position
for Trip conditions for easier identification of fault.Warranty on MCB is 5
Digitally signed by Rakesh
BALANCE WORK FOR CONSTRUCTION OF LIBRARY WITH LIVELIHOOD HALL AND KNOWLEDGE HUB AT TALCHER
Sl.No. DESCRIPTION OF ITEM UNIT QNTY RATE Rs. AMOUNT Rs.
Supplying and fixing 6 amps to 32 amps rating, 240 volts, C series, single
poles MCB of Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/
Schneider- Acti 9/L&T (Equievalant model)/Panasonic(Equivalant
model) /ABB(Equivalant model) or equievalant reputed make & model A
catagory ISI marked as approved. the existing MCB DB complete with
connections as per direction of Engg.-in-Charge. The MCB should be
Replacement Warranty will be 5 years.MCB should have the fault indication
system in different colour for ON, OFF & TRIP condition or Mid trip position
for Trip conditions for easier identification of fault.Warranty on MCB is 5
Supplying and fixing 40 Amps rating, TPN, 415 volts, RCCB,300mA .Make-
Equievalant higher model of Legrand/Snheider/Siemens / L&T/Panasonic
/ABB or equievalant reputed make & model A catagory ISI marked as
4 approved in the existing MCB DB complete with connections, testing and Nos 1.00 2640.84 2640.84
commissioning etc. as required as per direction of Engg.-in-Charge. .(4W
TPN BDB IC)AC ODU CONTROLLER). The RCCB should be
Replacement Warranty will be 5 years
Supplying and fixing 25Amps DP 240 volts, RCCB,300mA Make-
Equievalant higher model of Legrand/Snheider/Siemens /
L&T/Panasonic /ABBor equievalant reputed make & model A catagory
ISI marked as approved in the existing MCB DB in the existing MCB DB
complete with connections as per direction of Engg.-in-Charge. The RCCB
should be Replacement Warranty will be 5 years
Supplying and fixing 40Amps DP 240 volts, RCCB,300mA Make-
Equievalant higher model of Legrand/Snheider/Siemens /
L&T/Panasonic /ABB or equievalant reputed make & model A catagory
ISI marked as approved in the existing MCB DB in the existing MCB DB
complete with connections as per direction of Engg.-in-Charge. The RCCB
should be Replacement Warranty will be 5 years
Supplying and fixing 63Amps DP 240 volts, RCCB,300mA Make-
Equievalant higher model of Legrand/Snheider/Siemens /
L&T/Panasonic /ABB or equievalant reputed make & model A catagory
ISI marked as approved in the existing MCB DB in the existing MCB DB
complete with connections as per direction of Engg.-in-Charge.The RCCB
should be Replacement Warranty will be 5 years
Supplying and fixing 63Amps TPN 415 volts, RCCB,300mA Make-
Equievalant higher model of Legrand/Snheider/Siemens /
L&T/Panasonic /ABB or equievalant reputed make & model A catagory ISI
8 marked as approved in the existing MCB DB in the existing MCB DB Nos 1.00 3108.12 3108.12
complete with connections as per direction of Engg.-in-Charge.(for power
BDB & AC ODU, 8 way TPN BDB IC).The RCCB should be Replacement
Warranty will be 5 years
D (Earthing) INSTALLATION 0.00
S/IT/C Of Earthing with copper earth plate 600 mm x 600mm x 6 mm thick
ISI marked including accessories and providing masonary with cover plate
1 having loccking arrangement and watering pipe etc (WITH charcoal and Nos 2.00 6609.18 13218.36
salt) as required as per direction of Engg.-in-Charge. The entire earthing
system should be Replacement Warranty will be 5 years
S/IT/C of materials and installation of pipe earth electrode made out of 50mm
dia class B G.I. pipe of 3.0 metre long with arrangements for fitting/
termination of G.I. flat / wire with G. I. nut bolts & washers including cost
of burnt wood charcoal, salt, foreign soil, water pouring arrangements, brick
masonary enclosure on top with removable RCC cover complete with labour
for excavation of pit in all kinds of soil & rock as required and as per
direction of Engineer-in-charge.The entire earthing system should be
Replacement Warranty will be 5 years
Providing and fixing 4 mm dia copper wire on surface or in recess for loop
earthing as required.as per direction of Engg.-in-Charge.
Providing and fixing 25mm x 5 mm copper strip on surface or in recess for
connections etc. as required as per direction of Engg.-in-Charge.
Providing and fixing 50mm x 5 mm copper strip on surface or in recess for
connections etc. as required as per direction of Engg.-in-Charge.
Digitally signed by Rakesh
BALANCE WORK FOR CONSTRUCTION OF LIBRARY WITH LIVELIHOOD HALL AND KNOWLEDGE HUB AT TALCHER
Sl.No. DESCRIPTION OF ITEM UNIT QNTY RATE Rs. AMOUNT Rs.
Supplying and making brick massonary pedastal with extra super structure
6 including cement plastering etc as required as per direction of Engg.-in- Mtr 4.00 2950.00 11800.00
E CABLING AND END TERMINATION MAIN AREA
Supplying of one number PVC insulated armoured and PVC sheathed XLPE
property AL. conductor power cable of 1.1 KV grade
POLYCAB/HAVELLS/Finolex or equievalant reputed make ISI marked
1 as approved of following size cables as per direction of Engg.-in-Charge.
Ncessary test report & Warrnaty certificate to be submitted to the department
for genuinity of product & to avail free after sales service within warranty
period for acceptance of materials
3.5core x 300 sq mm ( TO MAIN PANEL TRIPPLE /FOUR RUN/DG SET
TO MAIN PANEL TRIPPLE RUN )
b) 3.5core x 185 sq mm (AC PANEL INCOMMER) Mtr 121.00 1036.82 125455.07
Supplying of one number PVC insulated armoured and PVC sheathed XLPE
property AL. conductor power cable of 1.1 KV grade
POLYCAB/HAVELLS/Finolex or equievalant reputed make ISI marked
1.1 as approved of following size cables as per direction of Engg.-in-Charge.
Ncessary test report & Warrnaty certificate to be submitted to the department
for genuinity of product & to avail free after sales service within warranty
period for acceptance of materials
a) 3.5core x 95 sq mm ( FORZONE ) Mtr 21.00 560.87 11778.18
b) 3.5core x 70 sq mm ( FOR LIGHT/EQUP. PANEL) Mtr 26.00 450.28 11707.18
2 LAYING OF CABLE 0.00
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade
size not exceeding 25 SQ. MM direct in ground in the trench in one
horizental formation including excavation ,sand coushing protection covering
and refilling the trench etc as required as per direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade
size exceeding 25 SQ. MM but not exceeding 120 SQ. MM direct in ground
2.2 in the trench in one horizental formation including excavation ,sand coushing Mtr 100.00 165.20 16520.00
protection covering and refilling the trench etc as required as per direction of
Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade
size exceeding 120 SQ. MM but not exceeding 400 SQ. MM direct in
2.3 ground in the trench in one horizental formation including excavation ,sand Mtr 25.00 181.72 4543.00
coushing protection covering and refilling the trench etc as required as per
direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade
2.4 size not exceeding 25 SQ. MM direct in ground in the EXISTING PIPE etc Mtr 25.00 47.20 1180.00
as required as per direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade
2.5 size exceeding 25 SQ. MM but not exceeding 400 SQ. MM direct in ground Mtr 21.00 63.72 1338.12
in the EXISTING PIPE etc as required as per direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade
2.6 size not exceeding 25 SQ. MM in open duct etc as required as per direction Mtr 21.00 37.76 792.96
of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade
2.7 size exceeding 25 SQ. MM in open duct 400 SQ. MM direct in ground in the Mtr 20.00 50.74 1014.80
EXISTING PIPE etc as required as per direction of Engg.-in -charge.
Supplying and making end termination with brass compression gland and
3 aluminium lugs for following mentioned size cable.as per direction of Engg.- 0.00
Providing,fixing and laying of fallowing dia G.I. pipe (medium class) in
4 ground complete with G.I fitting incl. trenching(75 mm depth)and refilling as
per direction of Engg.-in-Charge.
Providing,fixing and laying of fallowing dia HDPE pipe (medium class) in
5 ground complete with fitting incl. trenching(75 mm depth)and refilling as per
direction of Engg.-in-Charge.
Digitally signed by Rakesh
BALANCE WORK FOR CONSTRUCTION OF LIBRARY WITH LIVELIHOOD HALL AND KNOWLEDGE HUB AT TALCHER
Sl.No. DESCRIPTION OF ITEM UNIT QNTY RATE Rs. AMOUNT Rs.
MAIN CONTROL PANEL AT MAINTAINANCE BLOCK
S/I/T&Commissioning of LT indoor floor mounted cubical type electrical
main panel (for both light and power circuit) made out by 2mm CRCA steel
sheet duly derusted & painted by siemens gray powder cote paint is designed
1 as G.A drawing as per direction of Engg.-in-Charge.Warrentee period of Set 1.00 3189477.46 3189477.46
replacement of panel & accessories must be 5 years & compelete test
certificate must be submitted along with panel board including component
In commer-1- 02 number 4p 1250A EDO TYPE ACB with 1. Micro
Processer Based with Breaking capacity - Icu= Ics= Icw= 50kA for 1 sec
having LSING Protection with Display-Current Metering with Last Trip
Record Data. (Communication with On & Off Status indication for Remote
Closing and Opening operation of breakers through Modbus RS485 protocol
a and uploading breaker status to Users Computer/SCADA.) & Electrical
locking for normal & DG (make-Equievalant model of Schneider(NW 6.0) /
ABB (E max PR 121)/ L&T ( U power MTX 4.5 )/ Siemens (3WL ETU 76B)
Legrand(Equievalant model),or equievalant make with proper model ISI
marked) (WITH AXULARY FOR BMS) (WITH AXULARY FOR
BMS)(500 KVA+750KVA TRANSFORMER)
In commer-2- 03number of 4p 1000A EDO TYPE ACB with 1. Micro
Processer Based with Breaking capacity - Icu= Ics= Icw= 50kA for 1 sec
having LSING Protection with Display-Current Metering with Last Trip
Record Data. (Communication with On & Off Status indication for Remote
Closing and Opening operation of breakers through Modbus RS485 protocol
b and uploading breaker status to Users Computer/SCADA.) & Electrical
locking for normal & DG(make-Equievalant model of Schneider (NW 6.0) /
ABB (E max PR 121)/L&T ( U power MTX 4.5 )/ Siemens (3WL ETU 76B)
Legrand(Equievalant model), or equievalant make with proper model ISI
marked) (WITH AXULARY FOR BMS) (500 KVA DG 02 NOS) & 01 NO
FOR 500 KVAR APFC PANEL.
BUSCOUPLER-1- 01 number 4p 1250A EDO TYPE ACB with 1. Micro
Processer Based with Breaking capacity - Icu= Ics= Icw= 50kA for 1 sec
having LSING Protection with Display-Current Metering with Last Trip
Record Data. (Communication with On & Off Status indication for Remote
Closing and Opening operation of breakers through Modbus RS485 protocol
and uploading breaker status to Users Computer/SCADA.) & Electrical
locking for normal & DG (make-Equievalant model of Schneider(NW 6.0) /
ABB (E max PR 121)/ L&T ( U power MTX 4.5 )/ Siemens (3WL ETU 76B)
Legrand(Equievalant model),or equievalant make with proper model ISI
marked) (WITH AXULARY FOR BMS)
Busbar-1&2 04 numbers of 1500Amps Aluminium busbar with 1A/SQ.MM
d current carring capacity. busbar duly sleeved by color coated PVC sleeve &
supported by suitable size DMC insulator. (for outgoing)
OUT GOING-1- 01 number 4p 1250A EDO TYPE ACB with 1. Micro
Processer Based with Breaking capacity - Icu= Ics= Icw= 50kA for 1 sec
having LSING Protection with Display-Current Metering with Last Trip
Record Data. (Communication with On & Off Status indication for Remote
Closing and Opening operation of breakers through Modbus RS485 protocol
and uploading breaker status to Users Computer/SCADA.) & Electrical
locking for normal & DG (make-Equievalant model of Schneider(NW 6.0) /
ABB (E max PR 121)/ L&T ( U power MTX 4.5 )/ Siemens (3WL ETU 76B)
Legrand(Equievalant model),or equievalant make with proper model ISI
marked) (WITH AXULARY FOR BMS) (FOR HVAC CHILLER PLANT)
Out going- 02 numbers of 400A 4P MCCB with ROM 36kA with
adjustable Thermal Magnetic Release with Ics=100% Icu. (make-
f Equievalant LSING model of Legrand-(DPX3)/Schneider-(NSX)/Siemens- 0.00
(3VM)/L&T(D SINE,MTX-1) or equievalant make with proper model) ISI
marked)with shunt trip.with axulary for BMS (AC & FUTURE ,FIRE)
Out going- 06 numbers of 63A 4P MCB( Make-LEGRAND-Ekinox3 DB/
Siemens-Betaguard/ Schneider- Acti 9/L&T (Equievalant
g model)/Panasonic(Equivalant model) /ABB(Equivalant model equievalant
make with proper model) ISI marked)(timer panel & water supply
management,equipement & chiller pump)
Digitally signed by Rakesh
BALANCE WORK FOR CONSTRUCTION OF LIBRARY WITH LIVELIHOOD HALL AND KNOWLEDGE HUB AT TALCHER
Sl.No. DESCRIPTION OF ITEM UNIT QNTY RATE Rs. AMOUNT Rs.
Out going- 5 numbers of 250A 4P with ROM 36kA with adjustable
Thermal Magnetic Release with Ics=100% Icu. (make- Equievalant LSING
model of Legrand-(DPX3)/Schneider-(NSX)/Siemens-(3VM)/L&T(D
SINE,MTX-1) or equievalant make with proper model) ISI marked)with
shunt trip.with axulary for BMS (SPARE ,FUN ZONE,COMMERCIAL
Out going- 5 numbers of 125A 4P Icu=10%Ics, encapsulated roto operative
double breaktype, LSIG MCCB with micro processor based release with
i adjustable overload from 36%-100% ,Comminucation module , ibuilt
current,voltage & energy metering,ZSI & Electrical locking for normal & DG
(make- LEGRAND/Schneider/ABB/Siemens, ISI marked)(STP,WTP)
Out going- 6 numbers of 32A 4P MCB ( Make-LEGRAND-Ekinox3 DB/
Siemens-Betaguard/ Schneider- Acti 9/L&T (Equievalant
model)/Panasonic(Equivalant model) /ABB(Equivalant model equievalant
make with proper model) ISI marked)(LIGHT SUPPLY)
Out going- 01 number of 630A 4P MCCB with ROM 36kA with adjustable
Thermal Magnetic Release with Ics=100% Icu. (make- Equievalant LSING
k model of Legrand-(DPX3)/Schneider-(NSX)/Siemens-(3VM)/L&T(D
SINE,MTX-1) or equievalant make with proper model) ISI marked)with
shunt trip.with axulary for BMS (APFC,MUSIUM MAIN PANEL)
Instrument- (i) 24 numbers phase indicating lamp with toggle switch & HRC
(ii) 06 set of digital type multifunction meter with CT for
i voltage,current,frequency,PF,THD indication with RS 485 COMPACTIVITY
ii (iii) 16 nos of 65kA SP VSD WITH 32A SP MCB
NB- This panel should have proper earth by suitable rated copper flat.
2 HVAC ODU PANEL
S/I/T&Commissioning of LT OUTDOOR mounted on roof top area with
IP-65 PROTECTION floor mounted cubical type electrical main panel (for
both light and power circuit) made out by 2mm CRCA steel sheet duly
a derusted & painted by siemens gray powder cote paint is designed as G.A Set 1.00 193333.56 193333.56
drawing as per direction of Engg.-in-Charge.Warrentee period of replacement
of panel & accessories must be 5 years & compelete test certificate must be
submitted along with panel board including component list.
In commer- 01 number of 400A 3P MCCB,36 Ka with under voltage,over
b voltage ,current,earth fault protection (make-
ABB/Siemens/SCHNEIDER/L&T/Legrand, ISI marked)
Busbar- 04 numbers of 500Amps Electrolytic copper busbar duly sleeved by
color coaded PVC sleeve & supported by suitable size DMC insulator.
Out going- (i) 63A 4P RCCB,100MA 4 NOS FOR OUT DOOR UNIT
UPTO 30 KW(Legrand/Schneider make)
Out going- (i) 100A 4P RCCB,100mA 4 NOS FOR OUT DOOR UNIT
UPTO 45 KW (Legrand/Schneider make)
Instrument- (i) 03 numbers phase indicating lamp with toggle switch & HRC
(ii) 01 set of digital type multifunction meter with CT for
voltage,current,frequency,PF,THD indication
3 FOR EMERGENCY LIGHT/POWER LOAD
S/I/T&Commissioning of LT indoor floor mounted cubical type electrical
main panel (for both light and power circuit) made out by 2mm CRCA steel
sheet duly derusted & painted by simens grey powder cote paint is designed
as G.A drawing. (FOR ALL MAIN CONNECTED LOAD) BUILDING
EMERGENCY LIGHT)as per direction of Engg.-in-Charge. Warrentee
period of replacement of panel & accessories must be 5 years &
compelete test certificate must be submitted along with panel board
including component list.
In commer- 01 no 40A 4P MCB 10kA,C series with on/off trip
indication UPS Light load for each floor. ( Make-LEGRAND-Ekinox3
b DB/ Siemens-Betaguard/ Schneider- Acti 9/L&T (Equievalant
model)/Panasonic(Equivalant model) /ABB(Equivalant model)or
equievalant make with proper model ISI marked)
Digitally signed by Rakesh
BALANCE WORK FOR CONSTRUCTION OF LIBRARY WITH LIVELIHOOD HALL AND KNOWLEDGE HUB AT TALCHER
Sl.No. DESCRIPTION OF ITEM UNIT QNTY RATE Rs. AMOUNT Rs.
Busbar- 04 numbers of 40Amps,50kA Electrolytic copper busbar duly
c sleeved by color coded PVC sleeve & supported by suitable size DMC
Out going- 06 nos 25A 2P MCB 10kA,C series UPS Light load for each
area UBDB. ( Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider-
Acti 9/L&T (Equievalant model)/Panasonic(Equivalant model)
/ABB(Equivalant model)or equievalant make with proper model ISI marked)
Instrument- (i) 03 numbers phase indicating lamp with toggle switch & HRC
01 set of 0-60Amps Ammeter with CTS.(DIGITAL)(Sicure/L&T,CT-KAPPA
or equievalant make & model)
01 set of 0-500 voltmeter .(DIGITAL)(Sicure/L&T or equievalant make &
f MAIN PANEL GF MUSEUM
CABLE TRAY /RACE WAY FOR DISTRIBUTION OF POWER
HOT DIPP GALVANIZED(GC) AS PER EN-ISO-1461 , CARBON STEEL
WIRE MESH CABLE TRAYS with internal dimensions of size 54mm(H) x
200mm(W), of Legrand - Cablofil make or equievalant reputed make &
model A catogory, ISI marked as approved .The Load bearing capacity of the
1 Cable Trays should be minimum of 104.8Kg/meter at the span of 1.5Meter mtrs 12.00 702.10 8425.20
as per UL specifications.(With all accessories,bend,cover,supporter)WITH
REQUIRED SIZED JUNCTION BOX ,COVER CONNECTOR as required
as per direction of Engg.-in-Charge. Warrentee period oftray must be 5 years
& compelete test certificate must be submitted .
HOT DIPP GALVANIZED(GC) AS PER EN-ISO-1461 , CARBON STEEL
WIRE MESH CABLE TRAYS with internal dimensions of size 54mm(H) x
300mm(W), of Legrand - Cablofil make or equievalant reputed make &
model A catogory, ISI marked as approved .The Load bearing capacity of the
2 Cable Trays should be minimum of 104.8Kg/meter at the span of 1.5Meter mtrs 12.00 814.20 9770.40
as per UL specifications.(With all accessories,bend,cover,supporter)WITH
REQUIRED SIZED JUNCTION BOX ,COVER CONNECTOR as required
as per direction of Engg.-in-Charge. Warrentee period oftray must be 5 years
& compelete test certificate must be submitted .
HOT DIPP GALVANIZED(GC) AS PER EN-ISO-1461 , CARBON STEEL
WIRE MESH CABLE TRAYS with internal dimensions of size 54mm(H) x
400mm(W), of Legrand - Cablofil make or equievalant reputed make &
model A catogory, ISI marked as approved .The Load bearing capacity of the
3 Cable Trays should be minimum of 104.8Kg/meter at the span of 1.5Meter mtrs 12.00 1077.34 12928.08
as per UL specifications.(With all accessories,bend,cover,supporter)WITH
REQUIRED SIZED JUNCTION BOX ,COVER CONNECTOR as required
as per direction of Engg.-in-Charge. Warrentee period oftray must be 5 years
& compelete test certificate must be submitted .
TOTAL AMOUNT 45,93,102.03
TOTAL AMOUNT 45,93,102.03
FIRE FIGHTING & FIRE ALARAM WORK
A PUMPS AND APPURTENANCES
Supplying, installation, testing and commissioning of Electric driven Main
Fire Pump suitable for automatic operation and consisting of following,
complete in all respects, as required : Horizontal type, multistage, centrifugal,
split casing pump of cast iron body & bronze impeller with stainless steel
shaft, mechanical seal conforming to IS 1520. Suitable HP Squirrel cage
1 induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation
on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for nclosure,
horizontal foot mounted type with Class-'F' insulation, conforming to IS-325.
M.S. fabricated Common base plate, coupling, coupling guard, foundation
bolts etc. as required. Suitable cement concrete foundation duly plastered
with anti vibration pads.
Digitally signed by Rakesh
BALANCE WORK FOR CONSTRUCTION OF LIBRARY WITH LIVELIHOOD HALL AND KNOWLEDGE HUB AT TALCHER
Sl.No. DESCRIPTION OF ITEM UNIT QNTY RATE Rs. AMOUNT Rs.
Supplying, installation, testing and commissioning of diesel engine driven
main fire pump suitable for automatic operation and consisting of following,
complete in all respects, as required : (Diesel Driven Pump) Horizontal type,
multistage, centrifugal pump of cast of iron body and bronze impeller with
stainless steel shaft, mechanical seal conforming to IS 1520. Suitable HP,
1500 RPM water cooled with radiator, diesel engine conforming to relevant
IS standard complete with auto starting mechanism, 12 /24 volts electric
starting equipment, diesel tank, exhaust pipe extended upto 10 m outside
2 pump house duly insulated with 50 mm
thick glass wool with 1.0 mm thick aluminium sheet cladding, residential
silencer, instruments and protection as per standard specification, stop
solenoid for auto stop in the event of fault with audio indications, painted
with post office red colour etc. as required. M.S fabricated, common base
plate, coupling, coupling guard, foundation bolts etc. as required. Suitable
cement concrete foundation duly plastered and with anti vibration pads. of
Engineer-in-charge..(Make:PUMP:KBL/ Grundfos / KSB/Wilo) (Disel
Engine: KBL/Greaves cotton)
Supplying, installation, testing and commissioning of electric driven
pressurisation pump suitable for automatic operation and consisting of
following, complete in all respects, as required : (Jockey Pump)
Horizontal type, multistage, centrifugal pump of cast iron body and bronze
impeller with stainless steel shaft, mechanical seal conforming to IS : 1520.
Suitable HP squirell cage induction motor TEFC type suitable for operation
on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for
enclosure, horizontal foot mounted type with Class-'F' insulation, conforming
to IS : 325. M.S.fabricated Common base plate, coupling, coupling guard,
foundation bolts etc. as required.
Suitable cement concrete foundation duly plastered and with anti vibration
Supply,Installation,Testing & Commissioning of dust and vermin proof front
operated compartmentalised cubicle type control panel suitable for operation
on 415 Volt, 3 ph, 50 c/s power supply with 630 Amp TPN Aluminium
busbar fabricated out of 2 mm thick CRCA sheet duly powder coated after
treatment in 7 tank process with top entry cable gland plate including
interconnections, earth bus as required comprising of :
INCOMING: One(1)- 400 Amp(250-400) 36 KA TPN MCCB with
microprocessor release, O/L, S/C and E/f release, Voltmeter with s/s,
Ammeter with S/s, 3 Nos 630/5 metering CTs of Class 1.0, ON/ OFF
indicating lamps, 3 Nos Phase indicating lamp and 4P 6A MCB
OUTGOING: a)Two(2)-250 Amp MCCB, with star delta starter suitable for
motor with O/L release, ON/ OFF push button, ON/ OFF indicating lamp, 3
Nos CTs metering CTs 250/5, Ammeter S/S.
b) 2 No (Outgoing) – 63 Amp MCCB, with star delta starter suitable for
motor with O/L reete foundation duly plastered and with anti vibration pads.
of Engineer-in-charge..(Make:PUMP:KBL/ Grundfos / KSB/Wilo) (Disel
Engine: KBL/Greaves cotton) single core multistandard copper conductor as
earth wire including all accessories and connection as per direction of
Engineer -in -Charge. CATAGORY AS FOLLOWS ,complete suitable for
STADIUM.(Maximum 02 nos point in one circuit).All the switches & sockets
should be warrantied for a replacement period of 10 years against defects
with ncessary test report & Warrnaty certificate to be s
a PANEL AS ABOVE Set 1.00 347021.93 3,47,021.93
Supply, installation, testing and commissioning of Floor/Wall mounted
sectionalised, front operated top entry dust and vermin proof M.V.Panel
Boards suitable for operation at 415V, 3 phase, 4 wire, 50Hz distribution
system fabricated out of 2.0 mm thick CRCA sheet, insulated busbar with
heat shrinkable PVC sleeve, base frame, complete with all accessories
including interconnections, earth bus etc as required comprising of.
One (1)- 63 Amp, 10 KA,TPN (Class-C) MCB with 3 Nos Phase indicating
lamps with control fuse/ MCB, Digital Voltmeter with selector switch. DOL
starter with O/L and Single Phasing Preventor suitable for motor. ON/OFF
indication lamps, Auto manual switch and ON/OFF push button.
Digitally signed by Rakesh
BALANCE WORK FOR CONSTRUCTION OF LIBRARY WITH LIVELIHOOD HALL AND KNOWLEDGE HUB AT TALCHER
Sl.No. DESCRIPTION OF ITEM UNIT QNTY RATE Rs. AMOUNT Rs.
One (1) - Set of Auxilliary relay for automatic operation through pressure
b PANEL AS ABOVE Set 1.00 41430.50 41,430.50
Supply & Laying of XLPE power cable of 1.1 KV grade of following size on
Supplying instalaltion hot dip galvanized ladder type cable tray of following
a size including installation along wall/ suspended from ceiling with brackets/
threaded suspenders including bends etc as required.
i 150 mm (W) X 50 mm (H) with 1.2 mm thick sheet Mtr 11.00 1117.46 12,292.06
ii 450 mm (W) X 50 mm (H) with 1.6 mm thick sheet Mtr 11.00 2465.02 27,115.22
7 Cable laying
Laying & fixing of one no. PVC insulated and PVC sheathed/XLPE power
cable of 1.1 KV grade of following size on Cable Tray as required.
i Upto 35 Sqmm Mtr 2.00 38.94 77.88
ii Above 35 Sqmm and upto 95 sqmm Mtr 2.00 87.32 174.64
8 End Termination
Supply & Making end Termination with brass compression gland and
a aluminium lugs for PVC insulated and PVC sheathed cable of 1.1 kv grade
(without cost of Cable)
B PIPE & VALVES ETC.
Supply,Installation,Testing & Commissioning of 'C' Class heavy duty MS
pipe (as per IS 1239 upto 150 mm NB and IS 3589 for above 150 mm 6mm
thick) with flanges and fitting such as bends, tees, reducers, rubber insertions
and galvanized nuts and bolts of following size on surface along wall / shaft
with MS bracket, suspended from ceiling/ beam with suspenders duly painted
with two coats of primer and finished with enamel paint of approved colour
laid through pipe or in trench after wrapping with hassen cloth after applying
coal tar primer as required as per direction of Engineer-in- charge.
Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe
conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts
bolts, gaskets etc. in ground including welding, excavation & providing
cement concrete blocks as supports, anticorrosive treatment with
coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes
complete as required.
Providing, fixing, testing and commissioning of following size manually
operated hand lever type cast iron double flanged slim seal wafer type
Butterfly valves with EPDM iron disc as per IS-13095 having pressure ratting
11 PN -1.60 including fixing the same with supply of required jointing materials
like rubber insertion, MS nuts & bolts, paint etc. and testing the joints with
required water pressure etc. all complete as per specification & direction of
Providing, fitting & fixing of following size cast iron double flanged type
dual plate Non return Valve as per IS- 5312 (Part 1): 2004 with ISI mark of
pressure ratting PN-1.60 including fixing the same with supply of required
jointing materials like flanges, rubber insertion, MS nuts & bolts, paint etc.
and testing the joints with required water pressure etc. all complete as per
specification & direction of Engineer-in-charge.
Supply,Installation,Testing & Commissioning of Pressure gauge of 0-16
13 Kgf/sq.cm. range with cut-off bronze ball valves of suitable size with all Nos 2.00 2472.63 4,945.26
accessories as per direction of Engineer-in-charge.
Supply,Installation,Testing & Commissioning of Pressure Switch with cut-off
14 bronze ball valves with integral strainer & flare nut (mixed ends) of suitable Nos 2.00 2569.53 5,139.06
size with all accessories as per direction of Engineer-in-charge.
Providing, installation, testing and commissioning of stainless steel Y-strainer
of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with
stainless steel flange
Digitally signed by Rakesh
BALANCE WORK FOR CONSTRUCTION OF LIBRARY WITH LIVELIHOOD HALL AND KNOWLEDGE HUB AT TALCHER
Sl.No. DESCRIPTION OF ITEM UNIT QNTY RATE Rs. AMOUNT Rs.
Supply,Installation,Testing & Commissioning of Air vessel made of 250mm
dia, 8mm thick MS sheet, 1200 mm in height with air release valve on top
16 and flanged connection to riser, drain arrangement with 25 mm dia Gun metal Nos 1.00 30806.99 30,806.99
wheel valve, with required accessories, pressure gauge and painting with
synthetic enamel paint as required.
C WET RISER CUM DOWN COMER SYSTEM
Supplying and fixing single headed internal hydrant valve with instantaneous
Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI
17 marked conforming Nos 6.00 7318.30 43,909.77
to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as
Supply,Installation,Testing & Commissioning of SS short branch pipe with 63
18 mm male inlet and 19 mm outlet nozzle, as per IS:903 and as per direction of Nos 6.00 3031.15 18,186.92
Engineer-in-charge.
Supply,Installation,Testing & Commissioning of 63 mm NB and 15meter
long RRL Fire Hose fitted 63mm intstantaneous stainless steel male &
female SS coupling, complete by GI wire binding for Internal Hydrant as per
direction of Engineer-in-charge.
Providing supply & fixing of MS Hose Box for of suitable
size(750X600X250mm) to accomodate 2 nos. of 15/ 1 no of 30 mtr long fire
hose and a branch pipe, wall mounted type as per direction of Engineer-in-
Supply,Installation,Testing & Commissioning of Swinging pattern wall fixing
first aid hose reel made from MS sheet and waterways and moving parts with
21 rubber hose of 20 mm dia. and 30 mtrs. long with ABS(Plastic) shut-off Nos 2.00 8351.83 16,703.66
nozzle as per IS: 444/IS: 12585 Type-I., complete with all accessories as per
direction of Engineer-in-charge.
Providing, fitting and fixing of C.I. 25 MM single air relief valve with stop
cock confirming to IS:14845/2000 with ISI mark for water works purpose
22 including fixing the same with hydrant riser including testing & Nos 2.00 2278.83 4,557.66
commissioning the system etc. all complete as per approved specification &
direction of Engineer-in-charge.
Providing, fitting & fixing of 4-Way GM fire brigade connection consisting of
63 mm dia instantaneous type male couplings with built-in check valves,
23 150mm dia flanged outlet complete with bolts, nuts and rubber insertions Nos 1.00 19776.78 19,776.78
confirming to IS:904 with ISI mark including testing & commissioning the
system etc. all complete as per apporoved specification & direction of EIC.
D SPRINKLER SYSTEM 0.00 0.00
Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type
24 sprinklers of rating 68 degree centigrade with required accessories :Pendent / Nos 12.00 590.02 7,080.18
Upright Sprinkler
Providing & fixing of Water Flow Switch switable for pipe 100 mm
25 Diameter with all accessories for all floors etc. all complete as per direction Nos 1.00 8820.23 8,820.23
of Engineer-in-charge.
Providing, laying, testing & commissioning of Flexible Sprinkler Hose
Corrugated Unbraided type of length 1mtr for Fire Sprinklers, with 1'' Inlet
26 Nipple BSPT,1/2" Outlet Reducer BSPT,0.7 m Square Supports Bar & Nos 8.00 1979.83 15,838.62
Brackets(UL Listed) with all complete accessories as per direction of
Engineer-in-charge.
E EXTINGUISHER SYSTEM
Portable Fire Extinguisher System Supplying, installation, testing and
commissioning of CO2 type Fire Extinguisher 4.5 kg capacity confirming to
IS: 2878 made from ISI marked seamless cylinder confirming to IS: 7285,
fitted with ISI marked controlled valve confirming to IS: 3224, high pressure
1mtr discharge hose & horn complete with initial gas charged with carrying
handle & wall mounting bracket as per direction of Engineer-in-charge.
Supplying, installation, testing and commissioning of ABC type fire
28 extinguishers of 6 kg capacity including cost of all material & labour etc Nos 2.00 5246.28 10,492.56
Supplying, installation, testing and commissioning of Mechanical Foam type
9 litre capacity Fire Extinguisher, ISI marked, IS: 10204, containing 540 ml
AFFF liquid ISI marked, IS: 4989 Part II and a polyurethane coated CO2 Gas
Cartridge, ISI marked, IS: 4947 complete with gunmetal union cap, nylon
hose with plastic foam making branch and wall mounting bracket as per
direction of Engineer-in-charge.
F AUTOMATIC FIRE DETECTION SYSTEM
Digitally signed by Rakesh
BALANCE WORK FOR CONSTRUCTION OF LIBRARY WITH LIVELIHOOD HALL AND KNOWLEDGE HUB AT TALCHER
Sl.No. DESCRIPTION OF ITEM UNIT QNTY RATE Rs. AMOUNT Rs.
Supplying, installation, testing and commissioning of Intelligent Combination
Heat potoelectric Smoke Detector, Intelligent Combination Heat
Photoelectric Smoke Detector, With Remote Indicator Output and Magnetic
Test Function, Without base (Certified by LPCB) Common Detector Base,
Common Detector Base for DI-910xE Series Detectors and for DC-910xE
series Detectors using EOLR
31 CONTROL PANEL
Providing S.I.T.C of Microprocessor based Addressable Fire Alarm Control
Panel (4 Loop) Intelligent Fire Alarm Control Panel Four loops with capacity
a) of 477 devices. Flush-mount new structure. 30 Zones, Integrated Wide range No 1.00 351404.00 3,51,404.00
PSU (100-240V) , with all asscery and Network Card, Battery Charger with 2
nos 12volt 9 AH Batteries (Certified by LPCB)
Supplying, installation, testing & commissioning of Addressable Single
b) Output Module,Single Input Module, provides dry contact (Loop powered) or Nos 2.00 7134.83 14,269.66
active Input (24VDC required, cable monitored) (Certified by LPCB)
Supplying, installation, testing & commissioning of Addressable Single
c) Output Module,Single Output Module, provides dry contact (Loop powered) NOS 2.00 7134.83 14,269.66
or active output (24VDC required, cable monitored) (Certified by LPCB)
Supplying, installing ,testing and commissioning of Digital Manual Call
Point, Flush mount Resettable (Non-Breaking Glass), Supplied with surface
mount back box and Special Reset Key, Optional Accossories:4556356,
4556520(Certified by LPCB)
33 Electronic Hooters
Supplying, installing ,testing and commissioning of Intelligent Sounder
Strobe, Addressable Sounder with Visible Indicator, 16 tones, high/low
consumption modes, can be loop owered or 24VDC powered, 83-89dB
(Certified by LPCB)
Supplying & laying of 2x1.5 sqmm fire alarm armoured cable,600/1000V
i rated with annealed copper conductor having XLPE insulation, steel wire Mtr. 111.00 156.26 17,345.00
armouring & FRLS outer sheath complete as required
Supplying and fixing metal box of following sizes (nominal size) on surface
ii or in recess with suitable size of phenolic laminated, sheet cover in front NOS 28.00 146.28 4,095.80
including painting etc. as required. 100 mm X 100 mm X 60 mm deep.
G PUBLIC ADDRESS SYSTEM
Supplying, installation, testing & commissioning of ceiling/wall mounted
loud speaker, 3/15 Watt in ABS enclosure complete as required
36 Supplying and drawing of speaker cable Single pair, 2-core, 1.5 sqmm Mtr. 121.00 75.48 9,132.52
Providing and installing in position the following type of sign boards made
out of 3mm thick "Opaque" PVC foam board with computer cut, PVC non-
reflective self adhesive vinyle painted foam board, complete with mirror
Floor indentification signage ( ie, GROUND FLOOR …etc.) at each stair
enclosure on every floor, indicating the floor number in words, lettering size
shall be 7.5 cm with contrasting colour from back ground.Size shall be 15cm
Providing and fixing the signages "Fire Exit, Fire Exit Arrow Down,Fire Exit
Arrow Left,Fire Exit Arrow Right" of 1.5in height letters in white with green
back ground.The size of the board shall be 25cm x 15 cm and shall be fixed at
the height of 2 mts
Providing and fixing the signages "In case of fire pull down - with Manual
call point symbol ". Size 6" x 8"
iv Providing and fixing the signages "Main fire alarm panel." Size 6" x 8" Nos 1.00 954.74 954.74
Providing and fixing the signages "In case of fire, Do not use Lift, Use Stair -
with symbol." Size 8" x 8"
vi Illumination Glow light for Exit Indication with Battery Back-up. Nos 1.00 10852.31 10,852.31
I Fire supression system
Supply & Laying of Linear pneumatic heat Detection Tube with all necessary
fittings & supports.
Digitally signed by Rakesh
BALANCE WORK FOR CONSTRUCTION OF LIBRARY WITH LIVELIHOOD HALL AND KNOWLEDGE HUB AT TALCHER
Sl.No. DESCRIPTION OF ITEM UNIT QNTY RATE Rs. AMOUNT Rs.
Supply, installation, testing and commissioning of Health Monitoring Panel
with Audio Visual Alarm. The Panel Should have Provision for integration
with Fire Alarm/ SCADA/ BMS System.(Make: SUPREMEX /SVS or
TOTAL AMOUNT 28,94,386.33
TOTAL AMOUNT 28,94,386.33
GRAND TOTAL 12,61,67,068.37
GRAND TOTAL 12,61,67,068.37
Digitally signed by Rakesh
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.06 MB
NIT.pdf
Tender Document
GCC with upto date amendments.pdf
Tender Document
LIST OF MAKES.pdf
Tender Document
Milestone.pdf
Tender Document
SCC.pdf
Tender Document
Singed IP.pdf
Tender Document
STRUCTURE DRAWING.pdf
Tender Document
BOQ_COAL MUSEUM.pdf
Tender Document
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .