EI Works

Amount

Supply & Fixing of 9W LED bulkhead fittings complete set.(cool white and neutral white) cat no- WT202W LED6SNW PSU S2PC, Philips make. For garage

Supplying & Fixing bulk head light fitting (Havells make) with die cast aluminium housing & frosted glass on wall/ceiling incl. S&F 9watt LED lamp complete set.

S&F of Philips 340341486 7.5-Watt LED Wall Light (Silver)

Supply & Fixing of 230V 4ft LED light fittings complete with all allied accessories, LED tube light , Incl necy connections. Single tube fitting (Philips Cat No-TMC501 P 1 x TLED)with two nos essectial LED tube 1200 mm 18W

Supply & Fixing of 230V 4ft LED light fittings complete with all allied accessories, LED tube light , Incl necy connections. Double tube fitting (Philips Cat No-TMC501 P 2 x TLED)with two nos essectial LED tube 1200 mm 18W

S & F of 9 watt LED type bulb light at existing batten holder.make Phillips

Supply & Fixing of 1200mm (48 inch) sweep AC ceiling fan complete with all accessories. blades, canopy, fork, rubber bush etc. [CROMPTON make AURA ].

Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Brand approved by EIC) on existing Modular GI switch board with top cover plate incl. making necy. connections etc.

Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit (14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.

S & F 20mm steam pipe down rod for A.C. ceiling fan complete with cutting, threading, making hole and painting by Co.'s own tools and tackles as per direction of EIC

S & F of 9" sweep AC exhaust fan incl. making hole on wall with nuts & bolts as required with louver shutter. (EPC heavy duty) 1420 r.p.m. and S & F louver with nuts and bolts.

Supplying & Fixing 240 V AC/DC superior type Ding-Dong Call Bell (Anchor) on HW board incl. S&F HW board

S/ Erection of 1.5 mtr long 40mm dia detacheble Single Arm Bracket on 80mm dia 2 m ST pole including painting with all require accessories for 125 W street light as per direction of E.I.C.

Providing CC (6:3:1) muffing 600x600x700 mm in size or equivalent size cylindrical muffing above groung floor level around the pole base complete with 3mm thick neatly finished cement plaster all round after dismantling the un-servicable muffing if necessary. (without loop Box).

Supplying and Fixing GI water proof looping cable box having hinged GI Top Cover having 4 mm thick with rubber gasket lining, railway type mechanical locking arrangement, earthing terminal with lug etc. of the following sizes as indicated below, Comprising of one 250 V, 15 A Kit-Kat fuse unit, one NL on porcelain insulator etc. and housing the same in pole muffing incl. addition and alteration to the existing CC muffing (6:3:1) after dismantling the damaged looping cable box etc. where necy. incl. painting 200 x 150 x 100mm

S & F 90 w LED street light fittings complete with all accessories duty wired for ready to use (Approved make) to be fitted in the existing pole & new installation pole as per the direction of EIC. make Havells Cat No: ENDURAPEARLMAGNUMSL90WLED757PASYTOTG/Philips/CG.

S & F 25A timer controller in SS double door phosphatised powder coated 12 way SPN DB, din rail with IP-43 protection with electrical accessories & front door locking arrangement with all connection, a) 25A FP MCB(10kA, C curve)—1no, cat no—BB40250C, MCB housing should be thermostat materials( fire retardant). b) 22a DP Power Contactor( AC1- 32A)—1no, c) Daily & weekly programmable basis digital time switch, min switching time 1 min, 25 ON/OFF programs,6 yrs. Battery backup, settable DST & key pad lock features. Cat no. – 67DDT0. D) 12 WAY SPN DOUBLE DOOR DB- DB should have door reversibility feature, inbuilt pad locking facility, 1 no, cat no—DB SPN012DD.(Make Hager, L & T, Schneider/ Crabtree)(for compound light)

Supply of 16 M High Mast shaft in two sections made from High Tensile Steel of Grade S355JO of BSEN:10025 suitable for wind speed as per IS 875, with raising lowering system comprising, head frame, luminaries carriage suitable to install 6 luminaries in symmetrical arrangement, double drum winch, 5mm diameter 2 continuous SS wire rope without any jointed or bolted, trailing cable, connector, integral power tool motor, junction box, lightening finial.Wiring material,power cables between panel and mast, MCB in base compartment, Cg mounting clamps and bolts , luminary mounting bolts are not included. APPROVED MAKE: BAJAJ/TRANSRAIL/VALMOUNT. The following points must be noted and documents must be submitted by the bidder during tender submission: a) The highmast should have wind tunnel test report. Relevant documents should be submitted during tender submission by the bidder. b) The Winch Type Test report must be submitted by the bidder from a reputable Government Institute during tender submission.

c) The Highmast Manufacturer must have Govt. of India recognised Laboratory and Illumination Design Cell. Relevant Supporting Documents must be submitted by the bidder confirming the same during tender submission. d) Relevant ISO Certificates of the manufacturers must be submitted by bidder during tender submission.

Supply of foundation bolts manufactured from special steel along with nuts, washers, anchor plate and template.

Supply of 150 W LED Floodlight BENP 20FL or equivalent along with accessories. MAKE: Havells cat no.JETAIRISFLS150WLED757PSYMLTG /Philips/CG.

Supply of twin dome LED aviation obstruction lights of type. APPROVED MAKE: PHILIPS/BAJAJ/CG

Supply of outdoor stand mounted feeder pillar with 32A TPN MCB incomer, single dial time switch, 25A TP contactor for the automatic switching of luminaries, power tool control with 2 no 9A contactors and raise lower push button, Incoming 35 sq. mm and out going 16 & 2.5 sq. mm terminals

Construction of shallow foundation with M20 grade concrete for the highmast considering the safe soil bearing capacity at site as 10 T/sqmtr at 2 metre depth with all materials and labour.

Erection of the high mast with the help of suitable tools and plants, wiring of luminaires with all wiring materials like PVC insulated PVC sheathed flexible cable of suitable copper conductor cores of 1.5 sq. mm, lugs, MCB and all labour.

Provision of GI pipe earthing for High mast with 2.5 M long 40 mm dia GI Pipe including connection to High mast earth terminal with 25 x 3 mm GI flats with all materials and labour. (2nos per mast required)

Installation of the mast feeder pillar by grouting the stand in concrete.

S & F 40W LED Maple. Incl. all accessories.

Supply , Erection and Painting of ST Pole of length upto 9 mtrs. Long with 2 coat of Al. Paints over one coat of R.O. primer after cleaning the pole surface by sand / emary paper etc. for receiving the fresh coat of paint.

S/ Erection of 1.5mtr long 40mm dia detacheble Arm Bracket on 80mm dia pole with all require accessories as per direction of E.I.C.

Providing CC (6:3:1) muffing 600x600x700 mm in size or equivalent size cylindrical muffing above groung floor level around the pole base complete with 3mm thick neatly finished cement plaster all round after dismantling the un-servicable muffing if necessary. (without loop Box).

S &F 8”x6”x4” c.i.water proof Hensel - Make loop box (4 mm thick) having 4 way terminal, WITH 1 NO FUSE LINK fixed on pole 3mtr the from the muffing. Mending good the damages.

S & F 70w LED street light fittings complete with all accessories duty wired for ready to use (Approved make) to be fitted in the existing pole & new installation pole as per the direction of EIC.Make: Havells Cat No: ENDURAPEARLPLUSSL70WLED757SASYTOPC /Philips/CG.

Supply & laying 3x1.5 sqmm PVC insulated and unsheathed copper wire froom loop to S.V fittings.

Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required ( 32mm. Dia)

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level & restoring surface duly rammed as by TATA-Medium GI pipe

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required

Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages 10 SWG

S/F 10 ltr geyser complite set incl S/F 2nos connecting pipe for connection of geyser to exsisting plumbing line as per direction of EIC. ((Venus))

S & F Lightning conductor Air-terminals made of 15 mm dia 1500 mm long GI pipe (ISI Medium) having five prongs of 4 SWG GI (Hot Dip) wire at top with 85 mm dia 6 mm thick GI base plate at bottom incl. necessary holes etc. duly grouted on the parapet etc. in CC mortar (4:2:1)

S & F of (Hot Dip) strips 25mm x 6mm thick for vertical run on wall for lightning conductor with post insulator spaced not exceeding 500 mm apart incl. mending goog the damages to building work. Wire at top with 85mm dia 6 mm thick GI base plate at bottom incl. necessary holes etc. duly grounded on the parapet etc with 4 nos for nutas required (for Horizontal runs) with 40 mm long GI Staples spaced not exceeding 1300 mm apart incl. mending good all the damages to the building works. (VERTICAL)

S & F of (Hot Dip) strips 25mm x 6mm thick for Parapet/Roof/Plinth/ Surface of wall for lightning conductor with post insulator spaced not exceeding 500 mm apart incl. mending goog the damages to building work. Wire at top with 85mm dia 6 mm thick GI base plate at bottom incl. necessary holes etc. duly grounded on the parapet etc with 4 nos for nutas required (for Horizontal runs) with 40 mm long GI Staples spaced not exceeding 1300 mm apart incl. mending good all the damages to the building works. (HORIZONTAL)

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By ISI-Medium GI pipe

Excavation of soil for installation of Earth Electrode and filling & ramming. For Soft Soil

Extra for treatment of soil by using salt & charcoal or coke for plate electrode.

Connecting the equipments body to earth busbar incl. S & F 50 mm x 6 mm Galvanized (Hot Dip) MS flat on wall/floor with GI saddle as required and connection to equipments with incl. drilling holes, bolts, nuts,washers etc.

Cutting cornices/ steps etc. including cutting recess in buildings etc. & supply & fixing 15 mm bore (ISI-Medium) GI pipe protection as below and mending good damages to the building works:Length above 0.5 Mtr

Making soldered joints between conductors, conductors and air terminals for 4 SWG GI (Hot Dip) wire incl. supply of jointing materials and painting with 2 (two) coats of bituminous paint

S & F of porceline insulator (SP65 of Electrical and electronic) Suitable for passing for earth conductor (Approve by EIC) with teo nos of screw on wall and suitable arrangement for fixing of earth continuty flat.

Hiring charges for scaffolding arrangement including dismantling at the end of work and carriage, for LC installation of overhead reservoir (vertical run)

S & F Masonary Inscription pit for Earth Station shall be approx 0.56 m x 0.56 M (1' - 10'' x 1' - 10'' ) out side dimention and approx 0.45 M (1'- 6'' ) deep when completed. Having 5'' thick cement brick work with 1ST class bricks in cement moetar (6:1) both inside and outside plastered 19mm (3/4'') thick both inside and outside and top shall be providing with R.C.C. cover filled, dressed and rammed

S & lying of the following size 1.1 kv.gr. PVC/A Al. cable as below (Havells/Gloston) with 2 nos.10 SWG G.I wire after cutting floor/pavement /wall and making holes incl. embedding the cable at an averate depth as below and mending good the damages to original finish incl. removing the rubbish.

2 Core 10 Sqmm. (for compound light)

2 Core 10 Sqmm. UG Trench (for compound light)

4 Core 16 Sqmm. UG Trench (For high mast)

Finishing the end of Following XLPE/PVC armoured cable by crimping method incl. S &F solder less socket tapes anticorrosive paste and jointing materials

2 Core 10 Sqmm.

4 Core 16 Sqmm.

S & F compression type gland complete with brass gland, brass rings & rubber ring for dust & moisture proof entry of XLPE/PVC armored cable as below

2 Core 10 Sqmm.

4 Core 16 Sqmm.

Terms and condition The Agency must procure the materials from the Manufacturer / OEM or from their authorised sales channel so that the standard warranty / support of the Manufacturer / OEM becomes applicable to the products to be delivered and installed by them.

Documents that authenticates such procurement from the Manufacturer / OEM or from their authorized sales channel and standard warranty / support should be sent from the e-mail of the Manufacturer / OEM / authorized sales channel to the e-mail of Engineer-in-Charge and hard copy of it to be submitted during execution, of work/submission of bill.

If any refurbished material is supplied and installed, penal action will be taken as per existing rules

PARTHA SARKAR

JOGMAYA ENGINEERING