SPECIAL REPAIR OF BLDG NO P-1880 OF CORPS ZONAL WKSP AND OTHER SANCTIONED WORK UNDER AGE B/R-II OF GE (A) No.1 IN ARMY AREA JODHPUR

Dismantling barbed wire fencing & removal from site complete all as directed

Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and as directed.

Dismantling post or struts (wood, steel or RCC) any section, including taking out embedded portion in concrete and making good the disturbed ground complete all as specified and as directed.

Taking down existing cement plaster on brick or stone walls, RCC surfaces, ceilings etc., including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings not exc 15 cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish to a distance out side MD land complete all as specified and as directed.

Demolition of brick / block or stone / boulder masonry walling built in cement mortar including all quoins arches pillars etc and removal unserviceable materials, debris, rubbish to out side MD land complete all as specified and as directed.

Demolition of cement concrete padding of water proofing treatment from roof padding including taking down bituminous polythene sheets plaster etc overall thickness n exc 200mm, cleaning of concrete surfaces by wire brushes scrubbng down water and removal of debris to a distance 50 metre but n exc 250 mtr from the site complete all as specified and directed.

Taking down carefully cement concrete / spalled out concrete from RCC roof projections, ceilings, sunsheds, beams etc upto cover depth by chipping out lightly including necessary scaffolding etc complete all as specified and directed.

Excavating in post holes (of similar holes) each n. Exc. 0.50 cum getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25cm, watering and removing surplus soil to a distance n. Exc. 50m and making good surface complete all as specified and directed.

Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, for laying of cables, erection of poles, struts/stays etc. n exc 10 sq m on plan and n exc 1.5m in depth and getting out dense/hard soil complete all as specified and as directed.

Removal of excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick of excavated soil complete all as specified and as directed.

M&L for Plain cement concrete 1:4:8 type D-2 by using 40 mm graded crushed stone aggregate as in foundation, filling and mass concrete, in flooring path, sub foundation etc, complete all as specified and as directed .

M&L for plain cement concrete 1:3:6 type C-2 by using 40 mm graded crushed stone aggregate as in foundation, filling and mass concrete for fencing post, foundation for embedding the post ,as in surface chasnnels and drains etc,complete all as specified and as directed .

M & L for Precast cement concrete 1:2:4 type B1 (20mm graded aggregate) solid block masonry exc. 10 cm in width and setting in cement mortar 1:4 complete all as specified and as directed.

S&F GI wire netting 0.71 mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps, cutting and waste complete all as directed.

Taking down old door & remove from site complete all as directed.

Taking down steel window / ventilator complete all as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed.

M&L for squared rubble walling, Jodhpur type, regular coursed well bonded ,bedded and solidly hearted built in cement mortar 1:6, complete all as specified and directed.

All as per item No. 20 here-in-above, but except stone complete including cleaning of old mortar from stones etc all as specified and directed.

Extra over stone walling for hammer dressing to face stone & dressing of face beds & joints as specified of squared rubble walling Jodhpur type brought upto courses with maximum depression of face from straight edge held against the dressed surface n exc 20mm and dressing face beds and joints, complete all as specified and directed.

M&L for 15 mm thick screed bed or bedding layers in CM (1:4) for laying in floors finishing complete all as specified and directed.

M&L Machine cut kota stone slab 20-25mm thick as in floor laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

All as per item No.24 here in before but on vertical surfaces such as skirting, dado and riser of steps etc complete all as specified and directed.

M&L for 25mm thick Plain Cement Concrete Type B0 1:2:4 (using 12.5 mm graded stone aggregate) in sub base, floors, pavings complete all as specified and directed.

M&L for raking out joints/ pointing to squared rubble masonry, jodhpur type regular course built in cement mortar complete all as specified and directed.

M&L for keyed pointing to square rubble masonry Jodhpur type regular course in CM 1:3 complete all as specified and directed.

M&L for rendering 15mm thick in CM 1: 6 on stone masonry surfaces or surfaces other than fair faces of brickwork or on one side of lathing finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on stone masonry surfaces finished even and smooth using integral water proofing compound without using extra cement complete all as specified and directed.

M&L for rendering 10mm thick on fair faces concrete surfaces in CM 1:4 and finished even and smooth in ceilings/facia/rcc chajja etc without using extra cement complete all as specified and directed by Engr-in-charge.

M&L for preparing new plastered surfaces of walls and applying two coat of Oil Bound distemper over 2mm thick wall care putty over a coat of alkali resistant primer and complete all as specified and directed by Engr-in-charge.

M&L for preparation of newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed.

M & L for complete removal of existing treatment and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces complete all as specified and directed by Engr-in-charge.

M&L for preparing newly plastered or unplastered surfaces of walls and applying two coats of cement base paint over a coat of primer, Priming the plastered and other surface with alkali resistant priming paint complete all as specified and as directed.

M&L for Plain Cement Concrete Type B1 1:2:4 (using 20 mm graded granite stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including use and waste of necessary formwork complete all as specified and directed.

M&L 50mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection or similar places, without using extra cement including cutting of joints n.exc 3.0 mtr length complete all as specified and directed.

M&L for glazed colour ceramic tiles (premium quality) of size 300 X450 X 7-8 mm, as in vertical surface such as dado/skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, over & including 10mm thick backing coat in CM (1:3) complete all as specified and directed.

Supply and laying machine / factory made kerb stone of M-25 grade,at or near ground level, cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required, complete all as specified and directed.

M&L 18 to 20 mm thick Udaipur green marble work (table rubbed & polished) as in steps, jambs, pillars, window cills, cooking platform & similar nature works, machine cut, best quality as per sample, over & including 15 mm thick screeding in CM 1:4 and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of marble including rounding of edges at nosing complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B-0 (using 12.50mm graded stone agg) as in roof padding with avg thickness of 40mm over cleaned surfaces of roof for making good any depression/undulation and to obtain desired slopes complete all as specified and directed.

M&L for carrying out water proofing treatment for roofs in the following stages - (i) Rendering 10mm thick in cement mortar (1:4), mixed with integral water proofing liquid all as per manufacturer's instructions over concrete surfaces finished even and smooth with out using extra cement. (ii) Material and labour for UV stable single component fibre reinforced elastomeric liquid applied waterproofing membrane having solid content of 55% formulated wih PU hybrid polymers and reinforcing acrylic fibres and having sun reflectivity Index (SRI) of 106. The application of the material should be done in three coat (6 hr gap after each coat) on the substrate, applying first self priming coat at ratio of damp proof ultra and water 3:1 then 2 undiluted coat of damp proof ultra obtaining coverage @1 ltr/10 sqft in two coats (10-12 hrs gap between each coat. The vital physical and chemical parameters shall be as under. Min elongationat break of 350%, crack bridging ability of 2.5 mm @650 microns thickness, resists positive hydrostatic pressure of up to 10 bars. The material shall be appliied with brush or roller, complete in all respect as per the direction of Engr-in charge/consultant. Also, proper surface preparation along with covingat corners is must, complete all as specified and as directed. Note : - (i) The work shall be executed by the authorized applicator of the manufacturer only. (ii) The authorized applicator of manufacturer shall be approved by GE. (iii) The color of final finish shall be decided by the GE (iv) WPC shell be measured separately and paid for under respective item of schedule).

M&L for Anodised aluminium powder coated aluminium framewok as in frames of doors, windows and ventilators, fixed type without sash bar or sliding type(2/3 track) or with louvers having suitable mechanism for tilting u shaped fillets, including necessary joining cleats. glazing clips, rubber packing. anodised aluminium snap beading. screws etc. complete all as specified

S&F powder coated aluminium decogrill all as per sample fixed to aluminium framework of windows & ventilators complete all as specified and directed.

S&F powder coated anodised aluminium window shutters prepared for sliding or hanging or fixed type etc with aluminium sections weighing minimum 0.55kg/m incl necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, screws and also including handles, tower bolts, locks and hinges etc complete all as specified and directed.

S&F 4.8mm thick plain, sheet glass, tinted, ordinary quality and glazing with oil putty/wooden beads in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed.

S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed to anodised aluminium framework for windows/vetilators & door shutters etc complete all as specified and directed.

M&L preparation of steel and steel base surfaces over 10 CM width or girth and applying two coats of synthetic enamel paint over one coate of red oxide primer complete all as specified and as directed.

S&F steel ventilator with top hung shutter incl hinges, steel peg stay complete all as specified and directed.

S&F 4mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified as directed.

S&F mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F powder coated anodised aluminium door shutters (minimum thickness of powder coating 50 micron), prepared for sliding or hanging or fixed weighing minimum 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, 2 tower bolts, 1 mortice lock of vertical type brass 4 levers size 65mm and anodised aluminum snap beading screws etc. complete all as specified and directed.

M&L for 3mm thick Aluminium composite panel (ACP) comprising of painted aluminium sheets & PVC sheet sandwich as per trade pattern in approved colour pattern including forming borders etc in small widths and necessary framework complete all as specified and directed.

M&L for plain cement concrete 1:3:6 type C-2 by using 40 mm graded crushed stone aggregate as in foundation, filling and mass concrete for fencing post, foundation for embedding the post ,as in surface channels and drains etc,complete all as specified and as directed .

S&F M.S Angle iron section with swain neck/Y junction , flat iron, hand rails, or other steel section or posts and struts in fencing drilled and countersunk for balusters running bars, nosing to steps including embedding in concrete and screwing etc. flat iron to angle iron post including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe 410-0 or Fe 310-0 complete all as directed and specified.

S&F framed work as in door or gates of angle, MS hollow pipes, steel work in tubular trusses, purlins, solid SQ sections, flat iron etc or other section with gusset plates, rails, braces etc complete with steel sheeting as required to be prepared for hanging or sliding with and including MS channel as post & holdfasts & suitable arrangements for locking etc complete all as specified & directed confirming to Fe 290 Gde E165.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F iron plates, any size, of galvanised iron sheet 3mm thick, fixed with galvanised screws in iron gate complete all as specified and directed.

S&F welding cast iron designer pieces ornamental type with intricate designs & like spirals, spikes etc as per sample fixed to steel gate by welding complete all as specified and directed.

M&L for mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, each screwed end to be fitted with washers and one haxagonal or square nut not exceeding 5cm long with dia of neck 5 to 10 mm complete all as specified and directed.

Supply only MS galvanised chain link fencing of any size or type(size as approved by GE) complete all as specified and as directed. Note:- Weight of chain link will be determined by BOO constituted by GE.

Fixing only mild steel galvanised chain link fencing including line wires, any mesh size and type to any type of standards, rails, straining bolts etc including provn of binding wire if reqd complete all as specified.

S&F MS tie round bars 10mm dia and over, cut to length, bent to shape required, including cranking bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire annealed not less than 0.9mm dia or securing with clips quality conforming to grade Fe-410 all as specified and directed

M&L Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and as directed.

S&F concertina coil of 600 mm diameter made out of 2.6mm dia spring steel wire 230gm/m2 (Min) dipped with corosion preventive fluid including white colour each coil having a minimum 50 turns (circles) covering in 10RM and an average weight of not less than 8.57 Kg including handle and spike at both end of coil erected in position on top of mild steel angle by fixing with GI clip for securing including necessory welding to the MS Section and as per manufactures instruction complete all as specified.

M&L for providing precast cement concrete type B0 1:2:4 (12.5mm graded aggregate) set in CM 1:6 for louvers and jallies, cement grill any type model of zafri 35mm thick (measured solid), including all mouldings complete all as specified and directed by Engr-in-charge.

M&L providing precast concrete moulded pillar including moulding in 1:2:4 type B0 using 12.5mm graded stone aggregate as in RCC jali post setting in CM 1:4 and including demolition of existing jallies and removed from MoD land complete all as specified and directed

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified.

M&L for hardcore of broken stone or boulders of gauge n exc 63mm deposited, spread, levelled in layers n exc 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 75mm thick Plain Cement Concrete Type C2, 1:4:8 (using 40 mm graded stone aggregate) in sub base, floors, pavings to receive floor finishes complete all as specified and directed.

Supply and laying machine pressed/factory made chamfered edge cement concrete rubberised interlocking paver block, 60mm thick with 6 mm thick top layers of anti abrasive material of M-35 grade with any colour, design & pattern, & size/ shape, as approved by GE as in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness made by table vibratory method using PU mould, laid in required colour & pattern over and including M&L 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed.

Supply and laying machine / factory made kerb stone of M-25 grade,at or near ground level, cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required, complete all as specified and directed.

M&L Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter etc.complete all as specified and directed

M&L Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and as directed.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns hooking ends cutting bending and binding with mild steel wire (annealed) not less than 0.90mm dia or securing with clips, complete all as specified and as directed.

All as per item No. 28 specified here-in-above, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders

M&L RCC M-25 nominal mix type B1 1:2:4 (using 20mm graded aggregates) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc. basement slabs, under-reamed piles and mass concrete

M&L RCC M-25 nominal mix type B1 1:2:4 (using 20mm graded stone aggregates) as in columns, pillars, piers, posts and struts and the like complete all as directed.

M&L for face work masonry with 100-125mm thick white/chitter sand stone having rock face bushings not less than 15-20mm incl chisel drafted margin 20-25mm wide all as per local Jodhpur pattern (KADAOU) regular coursed well bonded bedded & solidly hearted built in CM 1:4 complete all as specified. Height of Kadaou stone course shall not be less than 200mm all as directed at site.

M&L for sand stone moulded weathered copings, window cills & the likes set in CM 1:6 with corbelling, throatings all as per design complete all as specified.

M & L for keyed pointing to kadaou facework of Jodhpur sandstone in CM 1:3 using white cement & pigment to match the shade of stone complete all as specified.

Taking down old sand stone/precast cement concrete chattri over all size 0.6x0.75x1.2m and removed away from site etc complete all as directed.

M&L for fixing in position of Sand stone chattri Jodhpur pattern octagonal shape each side of length 60 to 60cm & height not less than 0.75m (excluding dome) incl 4 Nos sand stone columns, sand stone arches, brackets & sand stone dome slab of minimum 75cm height of approved shape & carvings incl 1 No brass finials of height 0.30m complete all as per trade pattern of interlocking & fixing of parts with suitable solvent cement adhesive all as directed.

S&F of fibre glass reinforced translucent 2-3mm thick plain sheeting with two side lap fixed with coach screw and washer in fencing, wall etc complete all as specified and directed.

Taking down carefully aluminium point wiring complete for light, fan, socket or power point etc with fittings fixtures such as ceiling rose, holders, electric fittings, switches, sockets, aluminium conductor cable with and incl wooden batten or FR PVC conduit and its accessories such as wooden gutties, rawl plugs, GI screws, aluminium clips, nails etc complete and removing the material from site and making good the disturbed surface of wall / floor/ ceiling etc as original i.e. brick work, plastering, white washing, OBD etc as required, complete all as specified and directed.

Taking down carefully UNSV main switch and DB's including MCBs of any size make, type and capacity and depositing at site as directed.

Taking down carefully UNSV Submain wiring and Services cable of any size make, type and capacity and depositing at site as directed.

M&L for (concealed) point wiring complete with multistranded copper conductor 1.5 Sqmm PVC insulated unsheathed single core FRLS cable 1100 volt grade, confirming IS 694 & colour code in conduit system of wiring, drawn through in and including non-metalic PVC concealed (including Cutting Chases and make good the distrubed surfaces as per existing finishes) conduit of size 20 mm or med grade as required as site, totally concealed in walls / and surface on floors / ceiling or fixed on surface of walls / columns / beam / tie beam etc by means of saddles and clips etc incl all conduit accessories / fittings / junction boxes / inspection covers etc of heavy grade, ISI marked and sunk terminal boxes of CI or 16 SWG pressed steel housing, totally concealed in walls with 3mm thick industrial laminated sheet top cover, fixed flush with wall surface by means of brass screws and sunk / cup washers, for mounting of switches, sockets fan regulators etc incl 1.5 Sqmm FRLS PVC insulated, unsheathed flexible multi stranded copper conductor cables as continuous earth wire connected to metallic bodies of luminaries / fans etc at one end and to common earth dolly at other end, suitable for One light point controlled by one, one way switch, complete all as specified and directed. Note:- The rates of chase cutting on wall done concealed conduit & making good good the distrubed surfaces as per existing finishes and steel terminal boxes are included in the unit rates

All as per Sr. item No.88 here-in-above, One fan/Exhaust fan point controlled by one way switch

All as per Sr. item No.88 here-in-above, but suitable for One socket outlet 3 pin, 5 Amps on independent board, controlled by one no 5 Amp switch.

All as per Sr. item No.88 here-in-above, but suitable for One socket outlet 3 pin 5 amps on the same board controlled by one no 5 Amp switch.

All as per Sr. item No.88 here-in-above, but with using 2.5 Sq mm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire for independent 15 Amp point.

All as per Sr. item No.88 here-in-above, but with using 4 Sq mm FRLS copper wire with 4 Sqmm FRLS copper earth wire for independent 15 Amp point.

S&F Switch piano flush type, single pole, one way, 6 amps, 230 volts, ISI marked complete all as specified and directed.

S&F Switch piano flush type, single pole, one way, 16 amps, ISI marked, complete all as specified and directed.

S&F Socket outlet, two-in-one, 5 Pin, 6 Amp, flush type, ISI marked 230 volts, complete all as specified and directed.

S&F Socket outlet, two-in-one, 6 Pin, 6 and 16 Amp, flush type, ISI marked 230 volts, complete all as specified and directed.

S&F Ceiling rose, three terminals, PVC polycarbonate, isolated body, complete all as specified and directed.

S&F socket type electronic fan regulator flush type ISI marked complete all as specified and directed.

S&F Bell ding dong type AC, 230 Volts, single pole complete all as specified and as directed.

S&F Bell push 5/6 Amps, flush type complete all as specified and directed.

S&F post top lantern LED type 40 watt 230 volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and directed.

S&F in replacement LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including AC decorative box type with driver, holder including, copper conductor cable of suitable size from ceiling rose, 4 ft long, complete all as specified and as directed.

S&F in replacement bldg security LED Light Luminaire of 35 Watts having IP 65 protection fitting made out of pressure die cast Aluminium housing, operating Voltage 140-270 Volts with in built surge protectore, toughened glass with and including GI pipe 40 mm bracket of 1.5 m in length including drilling holes, nuts & bolts 2 coats of red oxide primer on GI pipe and fixing with wall security light on building wall connecting cable, complete all as specified and as directed.

Taking down ceiling fan for repair/rewinding of copper conductor complete greasing, two coat synthetic enamel paint and and refixing in same position and connecting up including provision of cable from ceiling rose or connector to fan complete all specified and directed.

S&F Vertical Distribution Board, double door, suitable for 'A' frame FP MCCB 100A made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP43 & IK09 protection, TPN 4 way, 415 Volts with bus bar rating 300 Amps, dust and vermin proof, suitable for incorporation of MCB's and MCCB etc and making all necessary connections, duly flush of wall surface complete all specified and directed. Note: MCCB and MCB will be measured and paid separately under respective items.

S&F MCCB, A frame, thermal adjustable magnetic setting, Ics=75% 16kA, 415V, 100 Amp, 4 pole MCCB with overload and short circuit protection complete all as specified and directed.

S&F MCB, B type curve, 10kA, 63 Amp, SPN with over load and short circuit protection complete all specified and directed.

S&F MCB, B type curve, 10kA, 6 to 32 Amp, single pole with over load and short circuit protection complete all specified and directed.

S&F sheet metal enclosures 240 Volts with suitable rated bus bar for double door IP-43 DB's suitable for one MCB SPN as incoming and 10 MCB SP as outgoing SPN 12 way complete all specified and directed.

S&F TP and earth enclosure with a three pin and earth plug with socket complete with one triple pole MCB, 63 Amps, 'B' curve type, 415 volts, 10kA complete all as specified and as directed.

S&F MCB TPN, 63 Amps, breaking capacity 10kA 'C' curve conforming to IS/IEC 60898-1 2002, integratedlabel holder, sliding bottom clamp, IP 20 protected terminal, sliding shutters, 240 volts, 50 Hz including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc complete all as specified and directed.

S&F security light junction boxes of dimension 240x130x110 mm with shockproof, rustproof, termite resistant, weather proof, cable entry from bottom, pole mounting arrangement along with 3 phase 4 wire aluminium bus bar with insulators and two Nos of MCB SP 0.5 Amps rating with MCB, Cable Glands, lugs all as specified and directed by Engr-in-charge.

M&L for sub main wiring (concealed) with 4 single core 10 Sqmm FRLS, PVC insulated, unsheathed and stranded copper conductor cable drawn through in and including 25 to 32 mm dia rigid non metallic PVC conduit heavy grade and including all conduit accessories & fittings / junction boxes / inspection covers etc including 10 sqmm FR PVC insulated unsheathed stranded copper earth cable connected to common earth dolly complete and incl cutting chasing and making good of disturbed surface of wall/floor/ceiling etc as original by brick work, plastering, white washing, OBD etc as required, complete all as directed.

M&L for sub main wiring with 2 run of 6 Sqmm FRLS, PVC insulated, unsheathed and stranded copper conductor cable with and incl 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable as earth wire connected with thimble from main DB to sub main DB, drawn into separate concealed medium grade, ISI marked, non metallic PVC conduit 25mm dia size incl all conduit accessories & fittings / junction boxes / inspection covers etc with and incl cutting chasing and making good of disturbed surface of wall/floor/ceiling etc as original by brick work, plastering, white washing, OBD etc as required, complete all as directed. Note: Two runs of 6 sqmm and one runs of 6 sqmm (earth wire) including one run of PVC conduit pipe shall be measured as one length incl making good the disturbed surfaces for the purpose of measurement.

M&L in replacement Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) wih top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 SSR Part-I 2009 and specified or indicated including excavation and earthwork in any type of soil PCC 1:3:6 type C1 in chamber, precast RCC 50mm thick in cement concrete 1:2:4 type B1, reinforced with welded steel wire fabric or XPM (Weight not less than 4.00 mm dia with cast iron frame, funnel with wire mesh, 20mm bore medium grade GI watering pipe, lugs, 15mm bore medium grade GI protection pipe, test point etc complete all as specified and directed. Note : (i) Item includes the cost of 7.5 metre GI pipe for protection of earth lead. (ii) Item includes the cost of 7.5 metre GI earth lead.

Supply, laying and testing of LT UG XLPE in trenches / saddle clamping on wall (as per site requirement) through protection pipe insulated, armoured, heavy duty electric cable, aluminium coductor, 1100 V grade, cross sectional area 50 sqmm 3.5 core, complete all as directed by Engr-in-charge. Note : Earth work and brick work measured and paid separately

Supply, laying and testing of XLPE insulated, armoured, heavy duty electric cable, aluminium coductor, 1100 V grade, cross sectional area 16 sqmm 2 core laid in trenches / ducts/ encased in GI pipe /fixed to pole including AI lugs, nut bolts, clamps and other minor accessories, complete all as directed by Engr-in-charge. Note : Earth work and brick work measured and paid separately

Supply and laying of sand for sand cushioning for cable protection in trenches including punning down of sand layer all as specified and directed. Note :- Punned thickness shall only be measured and paid.

Supply and laying unreinforced Precast concrete cable cover, class LV, type 1, flat size 300 mm x 180 mm x 40mm, complete all as specified and directed.

S&F GI tubing , light grade of 40mm bore with fittings as in road crossings for cable protection complete all as specified and as directed.

M&L for road cutting (not more than 3.5 mtr in width of road) and excavation upto 60cm below ground level and laying of 5 RM protection 40mm dia GI pipe of light grade and make good disturbed surface by PCC 1:4:8 (nominal mix), type D2, using 40mm graded crushed stone aggregate complete all as specified and as directed.

Note:- (i) Qty's have been clubbed from 2 Nos sanction Job's, whose details are encl as per appx (ii) The contract sum shall be arrived at after duducting amount of schedule of "Credit" from the Total quoted amount