Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.7 LAccepted-AOC 3 VIJAY PARK CHAKRATA ROAD DEHRADUN 248 001 UK | DEHRADUN | UTTARAKHAND | 248001 | L1 | Accepted-AOC Acceptance of contract | |
| 2 | L2₹30.5 L+₹1.2 L (3.99%)Rejected-AOC WING NO 7 2 10 PREMNAGAR DEHRADUN UK | L2 | Rejected-AOC R | |
| 3 | L3₹33.5 L+₹4.2 L (14.2%)Rejected-AOC INDEX NO E 1504 HQ CWE DEHRADUN 63 RAJA ROAD DEHRADUN | L3 | Rejected-AOC R | |
| 4 | L4₹34.9 L+₹5.5 L (18.8%)Rejected-AOC 00 JAI BHAWANI COMPLEX MAIN ROAD SADAR WARD JAGDALPUR BASTAR CHHATTISGARH 494001 UDYAM CG 01 0003803 | BASTAR | CHHATTISGARH | 494001 | L4 | Rejected-AOC R | |
| 5 | L5₹38.9 L+₹9.5 L (32.4%)Rejected-AOC INDEX NO E 72 HQ CWE HILLS VILL PO MEHUWALA MAPHI NEAR RAJKIYA INTER COLLEGE DEHRADUN UK | DEHRADUN | UTTARAKHAND | 248001 | L5 | Rejected-AOC R |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
1 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE IMA Dehradun
GE IMA Dehradun
REPAIR AND MAINT OF CERTAIN MD ACCN BLDGS OF CR CAMP MT COLONY AND GE IMA OFFICE AT IMA DEHRADUN
2023_MES_600931_1
GE/IMA/T-34 of 2023-2024 9325/E8
Open Tender
Support/Maintenance Service
Item Rate
180 days
GE IMA Dehradun
Refer NIT
8 documents required · 8 mandatory
₹500
Yes
GE IMA Dehradun
₹80,000
Yes
19 Aug 2023
3 Jun 2023
3 Jul 2023
4 Jun 2023
1 Jul 2023
17 Jun 2023
Amount
Demolition of old brick work or stone masonary built in cement mortar including all quoins, arches, pillars etc including removal out side IMA premises complete all as specified and directed.
M&L for Brick work with sub class 'B' bricks (old size) straight or curved on plan exc 6.00m mean radius built in cement mortar 1:6 complete all as specified and directed.
M & L for Brick work using sub class “B” bricks (except brick) straight or curved on plan exc 6 metre mean radius built in cement mortar 1:6 complete all as specified and directed.
M&L for Brick work with sub class ‘B’ bricks (old size), straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.
Taking down cement plaster on brick or stone walling built in cement mortar including raking out joints hacking for key scrubbing down with water etc including removal out side the IMA premises complete all as specified and directed.
M&L for Rendering 15mm thick plaster on fair faces of brick work or concrete surface in cement mortar 1:4 finished even and smooth without using extra cement and mixed with water proofing compound as per manufactures instructions, complete all as specified and directed Note- WPC will be measured and paid as supply only under respective items separetely.
M&L for Rendering 15mm thick on other then fair faces of brick work or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement and mixed with water proofing compound as per manufactures instructions, complete all as specified and directed. Note- WPC will be measured and paid as supply only under respective items separetely.
M&L for 75 mm thick PCC 1;3:6 type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection or similar places and finishing the surface even & smooth with out using extra cement including making joints 12mm wide to the full depth of PCC at every 3 meter and every change of direction and filling the same with mixture of bitumen & sand in ratio (1:1) by weight including necessary form work etc and including demolition of existing old cement concrete, complete all as specified and directed.
M&L for PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in foundation, filling, mass concrete and sub base of floor including demolition of existing old concrete complete all as specified and directed.
M&L for 25mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone agg) used as sub floor finish the surface to receive to tiles including demolition of existing old cement concrete floors etc complete all as directed.
M&L for 2nd class hard wood scantling clean swan 40 Sqcm and over in section fixed with nails in framed work in any position including dismantling existing timber scantling complete all as specified and directed.
S&F Pre- painted colour galvalume aluminium Zinc coating GI based corrugated steel sheet 0.50 mm thick of green colour having tensile strength of 550 Mpa and 150 GSM as in roof covering, fixed with self tapping screws etc complete all as directed including dismantling existing ACC sheet. Make:- Tata Blue Scope/ Jindal India Ltd. (Neu color+)/ JSW steel (color on+)
S&F Pre- painted colour galvalume aluminium Zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa and 150 GSM as in roof covering/cladding to wall, ridges fixed with self tapping screws etc complete all as directed including dismantling existing sheet. Make:- Tata Blue Scope/ Jindal India Ltd. (Neu color+)/ JSW steel (color on+)
S& F Steel work in hollow section and tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 including dismantling existing timber scantling complete all as specified and directed. Make:- Tata/ JSW steel/ Jindal India Ltd./ Appolo
Excavation in post holes (similar holes) each n exc 0.5 Cm getting out returning filling in and ramming earth or broken boulders mixed with earth around in layers not exc 25 Cm watering and removing surplus soil to out side IMA premises and making good surface in hard / dense soil.
M&L for PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregade ) in foundation for post holes, complete all as specified.
S&F 4mm thick E-board false ceiling (Classic) including galvanised colour coated snap grid frame for false ceiling, size of grid 605 X 605mm fixed with 1.6 mm dia GI wire suspenders one end tied to roof members and other end connected to main tee of grid framework by means of 4mm dia adjustable "J" hook consisting of two Nos washers and two nuts at 1.2 mtr centres, size of main tee 38mm X 25mmX 1.4mm, cross tee 38 mm X 25 mm X 1.4mm, angle along walls 38 mm X 25mm X 2.0 mm and including taking down existing boards any thickness including cover fillets etc complete all as directed.
Complete removing of existing treatment from wall / ceilling by using machinary complete all as specified and directed. (work to be carried upto a height of 7.50m height).
Prepration of scrapped/ new surface of wall/ ceilling and applying 1.00 mm thick Asian acrylic damp proof wall care putty as per manufacturer's instructions complete all as specified and directed.
Prepration of new surfaces of wall/ ceiling and applying two coats of oil bound emulsion distemper over a coat of primer by mechanical means complete all as specified and directed.
Preparation of old plastered surfaces of walls by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of oil emulsion distemper on walls by mechanical means complete all as specified and directed.
Preparation of old plastered surfaces of ceiling by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash complete all as specified and directed.
Preparation of old painted wooden surfaces of any description over 10 Cm in width or girth and applying one coat of synthetic enamel paint with approved shade complete all as specified and directed.
Preparation of old painted steel surfaces of any description over 10 Cm in width or girth and applying one coat of synthetic enamel paint with approved shade complete all as specified and directed.
Preparation of new wooden surface of any description over 10 Cm width and girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
S&F Drapery rod in any length, high strength MS pipe with corrugated PVC extrusion having outer dia 28mm including a pair of brackets, fixed in repair complete all as specified and directed.
S&F Decorative finals ABS plastic in matching colour of steel powder quoted paint of same colour of rod, fixed in repairs complete all as directed.
Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area n.exc 1.5 Sqm each complete all as specified and directed
Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area .exc 1.50 Sqm and n exc 4.00 Sqm each complete all as specified and directed
Taking down shutter of any description n exc 1 Sqm each complete all as specified and directed
Taking down shutter of any description exc 1 Sqm and not exc 2 Sqm each complete all as specified and directed
M&L for MS framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging: also fastening and fixing complete all as specified and directed.
M&L for Mild steel, plain, black sheet 1.00 mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with ri-veted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed
M&L for MS work as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles complete all as specified and directed.
M&L for PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in bed blocks etc for embedding hold fasts etc complete all as specified and directed.
S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification and drawing in SSR complete all as specified and directed.
S&F Factory made solid panel PVC door shutter 30mm thick(style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC "C" channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side and as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement suppling & fixing in the frame at site as per specification & drawing in SSR Part II 2020 etc complete all as specified and directed.
S& F Factory made extruded WPC (Wood Polymer Composite) Double Door Frame solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantetc and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). → Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed . Make:-Kumar Arch Tech Ltd( Ecocell),Navratan Speciality Chemicals LLP Ahmedabad ( GIZA),Yamuna Interiors Pvt Ltd, Yamuna Nagar(Black Cobra)
S& F Factory made extruded WPC (Wood Polymer Composite) single Door Frame solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantetc and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). → Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed . Make:-Kumar Arch Tech Ltd( Ecocell),Navratan Speciality Chemicals LLP Ahmedabad ( GIZA),Yamuna Interiors Pvt Ltd, Yamuna Nagar(Black Cobra)
S& F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 32mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately. Make:-Kumar Arch Tech Ltd( Ecocell),Navratan Speciality Chemicals LLP Ahmedabad ( GIZA),Yamuna Interiors Pvt Ltd, Yamuna Nagar(Black Cobra)
M&L 32mm thick factory made solid WPC (Wood plastic composit) moulded gauged door shutter brown, minimum density of 600 kg/cum with wire mesh in any number of division with (Frame size bottom rail 200 to 250mm wide ,middele or lock rail rail 150mm to 250mm wide, Stiles, top and freeze rails 100 to 120 mm wide and glazing bar 75 mm wide, including stainless steel wire mesh shall be fixed with WPC bedding in side rails with screwing 8x28 heat metal zink coated screws can be remove or fix again of the shall be as per manufacture instruction complete all as specified and directed. Make:-Kumar Arch Tech Ltd( Ecocell),Navratan Speciality Chemicals LLP Ahmedabad ( GIZA),Yamuna Interiors Pvt Ltd, Yamuna Nagar(Black Cobra)
S&F factory made 30mm thick 2nd class H.W. factory made glazed and skeleton shutter, open rebated and prepared to receive glass, gauge etc divided into squars, with plain chamfered or rounded, mitred and rebated sash bars, any numbers fitted with cut and mitered beads for securing glass/gauze etc, sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (b) complete all as specified and directed.
S&F Steel window factory made with side hung shutter including box type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed as per drg No TD 158 1/2 to 2/2 complete all as specified and directed.
S&F Steel window factory made with centre hung shutter including hinges and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed as per drg No TD 158 1/2 to 2/2 complete all as specified and directed.
S&F Steel ventilator factory made with centre hung shutter including hinges and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed as per drg No TD 158 1/2 to 2/2 complete all as specified and directed.
S&F Mild steel framed work such as grills, grating etc with end of bars shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing and similar work complete all as specified and directed.
S&F factory made 30mm thick flush shutter solid core construciton with partical board core and plywood face panels commercial type on both sides complete all as specified and directed.
S&F stainless steel butt hinges, 100mm long, medium weight, complete all as specified and directed.
S&F Butt hinges, 100mm long, medium weight, cold rolled, mild steel complete all as specified and directed.
S&F 250mm long aluminium anosized sliding door bolt with hasp staple (bolt type) and fixing clips to sheet cast or extruded section of cast aluminium complete all as directed.
S&F 150mm extruded aluminium alloy handles, fabricated type, complete all as specified and directed.
S&F 100mm extruded aluminium alloy handles, fabricated type, complete all as specified and directed.
S&F 100mm long aluminium anodized, barrel tower bolts of extruded section complete all as specified and directed
S&F 150mm long aluminium anodized, barrel tower bolts of extruded section complete all as specified and directed
S&F 300mm mild steel ordinary rat tail rod pattern spring including roller and roller plate fixed to wooden/mild steel chowkhat complete all as specified and directed.
Preparing surfaces holding the members in true position and welding in reparis n.exc 2.5 Cm in length, thickness of metal to be welded exc 9 mm and nexc 20 mm complete all as specified and directed.
S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.
Hacking out old broken glass pane of any thickness and size from wooden/metal frame including punching or drilling and glazing pins etc complete all as directed.
S&F 3mm thick sheet glass ordinary quality type & glazing with wooden beads in squares not exc 0.5 Sqm in each pan, complete all as directed.
S & F 3 to 4 mm thick frosted glass, ordinary quality and glazing with oil putty in square of any size pane and fixed all as specified.
M & L for Securing old glass of any description in existing steel/wooden frames glazed with putty/ beads including removing loose or decayed putty/beads, reputtying to match existing work etc. and fixed all as specified.
Taking down steel window shutter n.exc 1 Sqm and refixing in the same opening after replacement of broken hinges & wire mesh including welding,reveting , grinding, painting etc each complete all as specified and directed Note:-(Wire mesh shall be measured and paid separately under respective items of this BOQ).
S&F Continuous (piano) hinges, stainless steel of flaps (When open) in 30mm, complete all as specified.
S&F Ball bearing runners 45 mm Telescopic (KTS-20) full extension load capacity 50 kgs fixed in repair complete all as specified and directed. Make :Hexa, Hettich, Hafele.
S&F Stainless steel handles 100 mm size for kitchen cabinet shutters fixed in repair complete all as specified and directed. Make :Hexa, Hettich, Hafele.
S&F Chromium plated stainless steel wire basket (storage basket) pull out type for large utensils, size 480 x 500 x 150 mm of Grade 304 with necessary fixing clips etc fixed in repair complete all as specified and directed. Make :Hettich, Hafele, Butterfly.
S&F Chromium plated stainless steel wire basket (cup and saucer basket) pull out type, size 380 x 500 x 100 mm Grade 304 with necessary fixing clips etc fixed in repair complete all as specified and directed Make :Hettich, Hafele, Butterfly.
S&F Chromium plated stainless steel wire basket (plate basket) pull out type, size 380 x 500 x 100 mm Grade 304 with necessary fixing clips etc fixed in repair complete all as specified and directed. Make :Hettich, Hafele, Butterfly
S&F Chrome plated stainless steel wire basket (cutlery basket) pull out type, size 380 x 500 x 100 mm Grade 304 with necessary fixing clips etc fixed in repair complete all as specified and directed.. Make : Hettich, Hafele, Butterfly
S&F Chromium plated stainless steel wire basket (Grain Trolley) pull out type, size 480 x 500 x 200 mm Grade 304 with necessary sliding frame structure, fixing clips etc fixed in repair complete all as specified and directed. Make : Hettich, Hafele, Butterfly
S&F Chrome plated stainless steel wire basket (Bottle pull out) pull out type two self, size 120 x 500 x 432 mm with necessary sliding frame structure, fixing clips etc fixed in repair complete all as specified and directed. Make : Hettich, Hafele, Butterfly
S&F 18mm thick prelaminated colour WPC Board having base brown, minimum density of 600 kg/cum, for kitchen cabinet Shutter/ drawer Front, cup board shutters, frame etc complete all as specified and directed.
S&F 18mm thick WPC Board having base brown, minimum density of 600 kg/cum, for kitchen cabinet Shutter/ drawer Front, cup board shutters, frame etc complete all as specified and directed.
S & F Chromium plated Stainless steel wire plate rack of size 30 inch X 30 inch X 10 inch fixed in repair complete all as directed. Make:- Hatich, Haffle, Butterfly
S&F in repairs PVC tank lid/cover water storage tank lid cover (cylindrical) for 500/1000 ltrs capacity tanks, complete all as specified and directed.
M&L for Glazed ceramic coloured tiles of size 450x300 x 6-7mm thick , as on vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in same color tile grout to match laid over and including 10mm thick rendring in cement mortar 1:4 including 10 mm thick rendering in cement mortar 1:4 finished rough surface to receive tiles including dismantling of existing wall tiling including cement mortar bedding and removing out side IMA premises complete all as directed.
M&L for Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in same color tile grout to match the shade of tiles laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:4 including dismantling floor hearth or wall tiling including cement mortar bedding and removal out side IMA premises complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc, set and jointed in neat cement slurry and same color tile grout to match the coloured tiles including dismantling floor hearth or wall tiling including cement mortar bedding and removal out side IMA premises complete all as specified and directed.
M&L for Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm, as in vertical surface such as skirting dado and riser to step floor etc set and jointed in neat cement slurry and pointed in coloured cement to match with and including 10 mm thick backing in cement mortar 1:4 finished rough surface to receive tiles including dismantling of existing tiling including cement mortar bedding and removing out side IMA premises complete all as directed.
M&L for Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.36 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed same color tile grout to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete including dismantling of existing floor tiling including cement mortar bedding and removing out side IMA premises complete all as directed.
M&L for Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, as in vertical surface such as skirting dado and riser to step floor etc set and jointed in neat cement slurry and pointed same color tile grout to match with and including 10 mm thick backing in cement mortar 1:4 finished rough surface to receive tiles including dismantling of existing tiling including cement mortar bedding and removing out side IMA premises complete all as directed.
M&L for RCC (1:1½:3) Nominal mix (using 20mm graded crushed stone aggregate) as in slab supported on walls beams and columns in floor, roof, landing and in shelves and the like including demolition of existing R.C.C and removal out side IMA premises complete all as specified and directed.
S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
Use and waste of form work to edges of concrete flat slab and shelves, not exceeding 20 Cm Thick for fair finish surface complete all as specified and directed.
Use and waste of form work to soffits of suspended slab such as roof slab, floor slab, landing and similar work not exceeding 200mm thick for fair finish surface complete all as specified and directed.
M&L for Rendering10mm thick plaster in cement mortar (1:3) on concrete surface of ceiling finished even & smooth without using extra cement complete all as specifiied and directed.
S&F 15mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including taking up or down existing steel tubing pipe, cutting chases, pining in, making good to facings where reqd and pointing in cement motor (1:3) complete all as directed.
S&F 20mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including taking up or down existing steel tubing pipe,cutting chases, pining in, making good to facings where reqd and pointing in cement motor (1:3) complete all as directed.
S&F Udaipur green marble work 18 to 20 mm thick (table rubbed and polished) as in flooring, steps, cooking platform and like with and including 20 mm thick cement screed bed in CM 1:6 and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of slab including rounding of edges of udaipur green stone and demolition of existing stone slab or tiles with screed bed of any description and in any position complete all as specified and directed.
S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with MS clamp including taking down existing pipes complete all as directed.
S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with MS clamp including taking down existing pipes complete all as directed.
S&F PVC (SWR) bends in any radius 110mm bore in repairs complete all as specified and directed
S&F PVC (SWR) bends in any radius 75mm bore in repairs complete all as specifed and directed
S&F Vitreous china squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests including replacement of 'P' or 'S' cast iron, concrete bedding and making good existing floor fixed in repair complete all as specified and directed.
S&F Vitreous china wash down water closet pan (pedestal pattern) white including seat cover of plastic, complete including CP jet with necessary PVC pipe fittings fixed in repair complete all as specified and directed.
S&F PVC low level flushing cistern 10 Ltr capacity symphonic action type white including ball valve, float valve and handle including bracket and PVC flush pipe fixed in repair complete all as specified and directed.
S&F PVC conections 15mm size with PTMT nuts of 600 mm long fixed in repair complete all as specified and directed.
S&F Vitreous china wash basin, white, flat back, size 550x400mm including bracket fixed in repair complete all as directed.
S&F 15mm bore short body bib tap chromium plated with wall flange and aerator fixed in repair complete all as specified and directed. Make:- Kajaria Kerovit/ Cera (Victor series)/ Jaquar.
S&F 15mm dia Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed in repair. (Minimum weight 15mm-90gms/20mm125gms).complete all as specified and directed.
S&F Chromium plated pillar cock rocket type with areator 15mm dia screwed for iron pipe or brass ferrule, fixed in repair complete all as specified and directed. Make:- Kajaria Kerovit/ Cera (Victor series)/ Jaquar.
S&F Chromium plated basin inlet connection (angles valve) 15mm dia screwed for iron pipe or brass ferrule, fixed in repair complete all as specified and directed. Make:- Kajaria Kerovit/ Cera (Victor series)/ Jaquar.
S & F 500 Litres capacity rotational moulded polyethylene water storage tanks, five layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including 20mm dia GI light grade washout pipe 50mm long with plug and 20mm dia GI light grade over flow pipe 600mm long with fitting including dismantling of existing unserviceable tank and removing from site complete all as specified and directed.
Supply only liquid water proofing compound complete all as specified & directed.
Repairing to existing door/ window chajjas upto 3.0m span and width 1.0m by demolition/ scrapping of damaged portion and preparing the surfaces by providing 50mm thick cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate including finishing the surface by rendering 10 mm thick plaster in cement mortar 1:3 and finished even and smooth surface using extra cement over concrete surface and PCC benching including weathering sliglitely rounded or chamfered angles and throating over and including priming newly plastered/concrete surface by applying one coat of primer, 1.00 mm thick acrylic damp proof wall care putty and applying two coat of Apex paint (Weather coat exterior paint) and complete making good existing disturbed surface all as specified and directed (work to be carried out upto a height of 7.5 m and rate shall be inclusive of all necessary scaffolding and shuttering). Note: Reinforcement if required shall be measured and paid separately under respective.
Taking down existing broken portion of upward/ inverted facia or roof slab or visible concrete reinforcement of any thickness and shape and surface area exc 0.50 Sqm but n exc 5.0 Sqm and repaired by providing cement concrete 1:2:4 type B1 (using 12.5 mm graded stone aggregate) mixed with quick setting adhesive inclusive of all necessary reinforcement / mesh and other material including finishing the surface by rendering 10 mm thick plaster in cement mortar 1:3 and finished even and smooth surface using extra cement over concrete surface and PCC benching including weathering slightely rounded or chamfered angles and throating over and including priming newly surface with application of one coat of primer, 1.00 mm thick acrylic damp proof wall care putty and applying two coat of Apex paint (Weather coat exterior paint) and complete making good existing disturbed surface all as specified (work to be carried out upto a height of 7.5 m height and rate shall be inclusive of all necessary scaffolding and shuttering) . Note: Reinforcement if required shall be measured and paid separately under respective items of this BOQ)
Taking down existing broken portion of upward, dowanward / inverted facia or roof slab or visible concrete reinforcement of any thickness and shape and surface area n. exc 0.50 Mtr wide repaired by providing cement concrete 1:2:4 type B1 (using 12.5 mm graded stone aggregate) mixed with quick setting adhesive inclusive of all necessary reinforcement / mesh and other material including finishing the surface by rendering 10 mm thick plaster in cement mortar 1:3 and finished even and smooth surface using extra cement over concrete surface and PCC benching including weathering slightely rounded or chamfered angles and throating over and including priming newly surface with application of one coat of primer, 1.00 mm thick acrylic damp proof wall care putty and applying two coat of Apex paint (Weather coat exterior paint) and complete making good existing disturbed surface all as specified (work to be carried out upto a height of 7.5 m height and rate shall be inclusive of all necessary scaffolding and shuttering) . Note: Reinforcement if required shall be measured and paid separately under respective items of this BOQ)
Demolition carefully old RCC water tank incl RCC base beam over double storey RCC roof (cutting reinforcement as required to facilitate demolition) etc in any position, carefully removing demolished material from roof, making good existing roof surface and removal of debris out side IMA premises complete all as specified and directed.
M&L for 20mm thick plaster in cement mortar 1:4 over concrete roof surfaces, mixed with Water proofing compound (Liquid) as per manufacturers instructions including brushing neat cement slurry @ 3 Kg/Sqm over old RCC roof including taking down existing plaster on roof complete all as specified and as directed. Note : Water proofing compound (liquid) shall be measured and paid seperately.
M&L for PCC 1:2:4 type B0 ( using 12.5mm graded crushed stone aggregates) as in roof padding, laid in proper slope and finished fair and even, complete all as specified and directed.
M&L for Roof treatment through manufacturer /authorized applicator of the manufacturer as approved by GE by applying a coat of cold applied bituminous primer over cleaned surface @ 0.30 Kg/Sqm and laid 3mm thick APP modified five layer polymeric membrane , minimum weight 3.60 kg/sqm reinforced with polyester non-woven fabric (weighing not less than 150 gms/sqm) with torch application method as per manufacturer's instructions with side over lap of 75mm & end over lap of 100mm & tucked into the chases on vertical surfaces with grooves & make good in cement mortar 1:3, finally finished with bituminous aluminum paint @ 0.20 Kg/Sqm etc complete including taking down existing roof treatment of the RCC slab, cleaning off all foreign materials by wire brushing, cleaning roof surfaces with water and removal of spoil from defence premises, complete all as specified and directed. Note :- Work shall be executed by authorised applicator only and upto roof height of double storied building. Make:- STP/ Sika/ Pidilite
Disconnecting existing tanks, setting aside (or lowering if required) for repair, cleanung etc, Cleaning and removing all scale and dirt, etc from tanks and from mouths of circulating pipes, exc 250 ltr n.exc 500 ltr capacity including washing with bleaching powder and hoisting if required reconnecting and refixing cleaned tank in position after roof treatmen including writting date of cleaning by white point complete all as specified and directed.
Taking down carefully existing Exhaust Fan /Cabin fan /wall mounted fan from any height of any capacity/description by disconnecting the wire and set aside insafe custody for reuse and refixing in same postion after completion of repair work all as specified and directed. Note : Rate for minor spare required at the time refixing i.e nut bolts , gresing of exhaust fan shall deemed to be inclusive in the quoted rate.
Taking down carefully existing storage type water heater from any height of any capacity/description by isolating electric/water supply and set aside insafe custody for reuse and refixin in same postion after completion of repair work all as specified and directed. Note : Rate for minor spare required at the time refixing of geysers i.e Fasteners , PVC connection ,sefety valve ,plug top, AC Top, shall deemed to be inclusive in the quoted rate .
S&F in repair ceiling rose, 63.5 mm dia, ISI marked, three terminal of polycarbonate/isolated body including taking down old unsv ceiling rose complete all as directed. Make: Anchor Penta PC, Havells (Reo)/SSK
S&F in repair Electronic steppped type fan regulator 100 watt 230 volts AC 50 Hz including taking down old unsv fan regulator complete all as directed. Make:Anchor Penta PC, Havells (Reo)/SSK
S&F repair Batten holder, PVC/polycarbonate type with back plate suitable for batten fittings including taking down old unsv batten holder complete all as directed. Make: Anchor Penta PC, Havells (Reo)/SSK
S&F in repair switch piano, flush type, single pole one way 6 Amp including taking down old unsv switch complete all as directed. Make: Anchor Penta PC, Havells (Reo)/SSK
S&Fin repair switch piano, flush type, single pole one way 16Amp including taking down old unsv switch complete all as directed. Make: Anchor Penta PC, Havells (Reo)/SSK
S&F in repair socket out let, multipurpose, 2 in 1 5 pin, 6 Amp including taking down old unsv socket complete all as directed. Make: Anchor Penta PC, Havells (Reo)/SSK
S&F in repair socket out let, multipurpose, 2 in 1 5 pin, 16 Amp with fuse and neon indicator including taking down old unsv socket complete all as directed. Make:Anchor Penta PC, Havells (Reo)/SSK
S &F in repair Bakelite sheet cover 3 mm thick cut as required shape and size including brass screws and cup washer off following size for mounting swich, socket fan regulator etc including taking down existing unserviceable bakelite sheet cover complete all as directed. Make: Hylam, Woodlite, Hevells
S & F in repair pressed steel sunken terminal boxes 1.6 mm thick, 60 mm including brass screws and cup washer of following size for mounting switch, socket fan regulator etc including taking down existing the existing unserviceable sunken terminal boxes complete all as directed.
Supply and fix LED batten light fitting of lumens 2500 lumens wall mounted ,high pressure die cast alluminium, fully diffused ,polycarbonated diffuser,inbuilt electronic driver IP-20 ,high bright LED lamp, colour temp not less than 5700 COOL DAY Light,colour rending index not less than 80 ,life not less than 20000 hrs, inbuilt electronic driver, PF not less than 0.90 and THD less than 20 % with operating voltage 140-270V AC, 50 Hz, surge protection minimum 2.5KV including taking down old unsv T/L of any capacity all as specified and directed . Make: - Philips/Crompton/Havells/Eveready
Supply only LED batten light fitting of lumens 1200 lumens wall mounted ,high pressure die cast alluminium, fully diffused ,polycarbonated diffuser,inbuilt electronic driver IP-20 ,high bright LED lamp, colour temp not less than 5700 COOL DAY Light,colour rending index not less than 80 ,life not less than 20000 hrs, inbuilt electronic driver, PF not less than 0.90 and THD less than 20 % with operating voltage 140-270V AC, 50 Hz, surge protection minimum 2KV including taking down old unsv T/L of any capacity all as specified and directed . Make: - Make: - Philips/Crompton/Havells/Eveready
S & F in repair MCB SP complying to IS/IEC 60898, 240 volts 'C' Curve 10 KA with energy limiting class 3. The MCB shall have 50% lower watt loss as required by IS/IEC 60898 from 6A to 63A . The mcb shall have the unique property of di-electric strength, arc resistance, insulation, flame retardancy and temperature resistance, including connection with suitable size copper lugs, The MCB shall give visible flag indication when MCB trips on Short Circuit Fault. The MCB shall have safety shutter to avoid any wrong insertion of cable. The MCB shall have the termination capacity of 35 Sq mm. The MCB shall have electrical life 20,000 operations up to 32A and 12,000 operation up to 63A including connection with suitable size copper lugs complete all as directed. Make: Legrand, L&T, Havells
MCB SP6 to 32 Amp.240 volts
MCB SP 40 to 63 AMPS 240 volts
MCB SPN 6 to 32 Amps 240 volts
MCB SPN 40 to 63 Amps 240 volts
Taking down carefully existing surface conduit /casing caping wiring ( LP,FP,Socket point etc) including fitting /fixture such as ceiling rose, tube light fitting ,switch boards with switches /sockets from site carefully from any height by disconnecting the wire and set aside insafe custody for reuse and refixing in same postion after completion of repair work all as specified and directed. Note : Rate for minor spare required reixing the conduit and casing caping or fitting /fixtures (such as brass screw ,with cup and washer ,gitti, gypsum scre , batten nail, PVC saddle) at site , shall deemed to be inclusive in the quoted rate
Material and labour for point wiring with PVC insulated and unsheathed electric cable 1100 volts grade single core FRLSH having multi stranded copper conductor of 1.5 sq mm nominal cross sectional area drawn in existing Conduit concealed in wall with all fitting and fixing accessories and 1.5 sq mm PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to earth dolly by providing suitable lugs with & including modular metal flush box of required size factory made for mounting Modular switch, regulators etc with and including Modular cover and frame , ISI marked, for the following including taking down old unsv point wiring with connected accessories. Make of wire:Havells/ Polyacab /Grandlay/Anchor Make of conduit: AKG Plastic Pvt Ltd./Bhagwati Plastic & Agriculture industry /Polycab Note : (i) Point wiring & earth wire shall be connected to each & every sunken box. (ii) All screws, fasteners, bolts, nuts & washer shall be cadmium plated & the cost of which is deemed to be included in the quoted unit rates.
One light point controlled by one, one way 6 Amp modular switch.
One fan/exhaust fan point controlled by one, one way 6 Amp modular switch.
One 5 pin 5/6 Amps socket outlet point on the same board
One 5 pin 5/6 Amps socket outlet point on independent board
One bell point controlled by one, one way 6 Amp button switch.
Description all as per item No.129 here- in-before but point wiring with 4sq mm multistrand copper conductor cable for one six pin socket outlet 15 Amps controlled by one switch on independent board and 4 Sqmm PVC insulated multistranded copper conductor cable as continous earth wire.
S & F Modular switch single pole one way 6 Amp fixed complete all as directed. Make: Anchor, Legrand, Crabtree (Havells)
S & F for Modular switch single pole one way 16 Amp complete all as directed. Make: Anchor, Legrand, Crabtree (Havells)
S & F Modular socket outlet 2/3 pin combined 6 Amp 240 volts fixed complete all as directed. Make: Anchor, Legrand, Crabtree (Havells)
S & F Modular socket outlet 2/3 pin combined 16 Amp 240 volts complete all as directed. Make: Anchor, Legrand, Crabtree (Havells)
S & F fan regulator modular step type 120W 240 volts 2 module type complete all as directed. Make: Anchor, Bajaj, Crompton, Havells
Taking down carefully existing switch board including acessories such as switches, sockets ,regulators of any capacity/description disconnecting the wire and set aside insafe custody for reuse and refixing in same postion after completion of work all as specified and directed.
S & F in repair 16 way SPN DB MCB DB complying with IEC 61439 -1 & 3., sheet metal enclosures double door Including 01 x 40 to 63 A SPN MCB as incoming and MCB SP 6 to 32A as out gooning as per way of DB.The DBs should be supplied with tin platted insulated copper bus bar rated for 100A. 240 volts 2 in 1 shutter (Metal Door) with IK09 type with blanking plates where required and IP 43 degree protection, the DB door should be hinged type and possible to reversible at site.The DB door shall have overhang, to gel with wall properly.The DB shall be supplied with all insulated N. Bar riveted on Din channel frame and should not restrict cable entry from top or bottom.The DB shall have plastic knobs on shield to hold complete all as directed of following capacity . Make: Legrand, L&T, Havells, Schneider
Modular bell push flush type, 6 Amps240Volts.
M/S S P BUILDERS
Amit Traders
Sanjay Enterprises
M/s RK ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .