REPAIRS MAINTENANCE FLOOR TILES ALUMINIUM WOODEN JOINERIES AND CUP BOARDS REPAIRS TO KITCHEN TOILETS INCL FITTINGS AT VARUNA COMPLEX OF NPOL KOCHI

Amount

Taking down shutters of any description exc. 1 Sqm and n. exc. 2 Sqm each resecuring or easing & adjusting including re-fixing in the same opening complete all as specified and directed.

Taking down shutters of any description n exc 1 sq. m each resecuring or easing & adjusting including re-fixing in the same opening complete all as specified and directed.

Taking down shutters of any description exc. 1 Sqm and n. exc. 2 Sqm each complete all as specified and directed.

Taking down shutters not exc 1 Sqm each complete all as specified and directed

Taking down chowkats or frames exc 1.5 Sq. m but not exc 4 Sqm each but with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames), not exceeding 1.5 Sq.m each, complete all as specified and directed.

S&F Plain, solid, straight chowkats and frames using second class hard wood, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed, complete all as specified and directed by Engr-in-Charge.

S&F Plain framed, factory made paneled shutter (any number of panels) of second class hard wood, 35mm thick, with panels of timer flat or both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, complete all as specified and directed by Engr-in-Charge.

S&F Second class hard wood Glazed and skeleton shutters, 35mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.,sizes of members of shutters as specified in SSR Part - I, Section 8, clause 8.24 (a); supplied and fitted to chowkats, complete all as specified and directed by Engr-in-Charge.

S&F Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. but with sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in SSR Part-I section 8, clause 8.24 (a); supplied and fitted to chowkats 2nd class hard wood of 30mm thick complete all as specified and directed by Engr-in-Charge.

S&F in repair prelaminated particle board of 25mm thick, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work for wardrobe shutters, cupboard shutters, partition to the cupboards, drawers including necessary fixing arrangements complete all as specified and directed by Engr-in-Charge.

S&F in repair of 40mm dia, cupboard/ drawer knobs brass polished and fixed with nut, screw and washer and complete all as specified and directed by Engr-in-Charge.

S&F auto close stainless steel hinges of '0' crank (minimum weight shoud be 250 gm) used for cupboard shutters and similar work fixing with screws to the frames/ chowkats, including making easy to open/ close of cupboards and complete all as specified and directed by Engr-in-Charge.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames complete all as specified and directed by Engr-in-Charge.

Hacking out old broken glass from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones and complete all as specified and directed by Engr-in-Charge.

S&F Sheet glass, 3mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5 sq. m in each pane, complete all as specified and directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.

S&F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.

S&F Butt hinges, medium weight cold rolled mild steel 100 mm size.

S&F Butt hinges, medium weight cold rolled mild steel 75 mm size.

S&F Aluminium anodised, barrel tower bolts, 150mm long, of extruded section and fixed, complete all as specified and directed by Engr-in-Charge.

S&F in repairs of Aluminium anodised, barrel tower bolts, 150mm long, of extruded section and fixed, complete all as specified and directed by Engr-in-Charge.

S&F Aluminium anodised, barrel tower bolts, 100mm long, of extruded section and fixed, complete all as specified and directed by Engr-in-Charge.

S&F in repairs of Aluminium anodised, barrel tower bolts, 100mm long, of extruded section and fixed, complete all as specified and directed.

S&F extruded aluminium alloy handles fabricated type anodised 150 mm long.

S&F fixed in repair extruded aluminium alloy handles fabricated type anodised 150 mm long.

S&F of extruded aluminium alloy handles fabricated type anodised 100 mm long.

S&F in repairs of extruded aluminium alloy handles fabricated type anodised 100 mm long.

S&F Aluminium alloy, anodised, sliding door bolt, 300mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed.

S&F in repairs of Aluminium alloy, anodised, sliding door bolt, 300mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed by Engr-in-Charge.

S&F of Mild steel, 300mm long, ordinary rat tail rod pattern springs including roller and roller plate, complete all as specified and directed by Engr-in-Charge.

S&F in repair Mild steel, 300mm long, ordinary rat tail rod pattern springs including roller and roller plate, complete all as specified and directed by Engr-in-Charge.

S&F of Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length 150mm complete all as specified and directed.

S&F in repair of Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length 150mm including taking down existing unserviceable stopper, complete all as specified and directed.

M&L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

Cutting holes in brick walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required, depth of embeded portion of holdfasts or lugs as measured from the face of the jamb in to the wall shall be exceeding half brick but not exceeding one brick thick, including making good by plaster and matching the surface with suitable colour of OBD/ distemper complete all as specified and directed by Engr-in-Charge.

S&F anodised aluminium frame with two/ three track fol sliding doors, windows, ventilators, modular kitchen cupboards, wardrobes with one or more rebates including joining cleat for fixing etc. Powder Coating to anodised aluminum frame (minimum thickness of powder coating 50 micron) and complete all as specified and directed by Engr-in-Charge.

S&F of Aluminium Composite Pannel of approved colour/ pattern (ACP Sheets) of 4mm thick interior quality to make modular kitchen cupboards and wardrobes with sliding type door pannels including necessary handles/ Knobs of good quality (minimum one handles per door) and magnetic door catching clips etc. complete all as specified and directed by Engr-in-Charge.

S&F anodised aluminium powder coated window and ventilator shutters, side hung/sliding type without sash, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as hingesType B-21 100mm long( 2 Nos) suitable handle and rollers for sliding window shutters etc. complete all as specified. Note: After fixing of aluminium window the surface gap should be filled with CM and making good including matching the existing surface.

S&F of anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws etc. Powder Coating to anodised aluminum frame (minimum thickness of powder coating 50 micron) and complete all as specified and directed by Engr-in-Charge.

S&F Sheet glass, 4mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5 sq. m in each pane, complete all as specified and directed.

S&F Aluminium anodised deco grill of 50mm x 50mm fitted with 'C' channel fixed with wall, complete all as specified and directed.

S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, suppling & fixing in opening as per specification and making good and matching the existing surface complete all as specified and directed by Engr-in-Charge.

M&L for factory made solid single extruded panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gape inside for top rail and bottom rail: panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed PVC the style & rails with suitable PVC sheet beading and jointed to gather with solvent cement complete all as specified and directed by Engr-in-Charge.

S&F in repair of Aluminium Anodised Tubular towel rail, 20mm dia, D type, 60cm long between flanges

M&L Applying one coat of oil bound distemper over a coat of primer including preparation of old decorated or unplastered surfaces of ceiling including cornices, pilasters by brooming down or steel wire brushing, scrapping down, smoke soot moulds, moss and efflorescent salts and greasy spots and complete all as specified and directed by Engineer-in-Charge

S&F of Steel Drapery rod 25mm bore colour coated of desired colour with pair of PVC Funnel and Bracket for length n exc 2.0 m Max length complete all as specified and directed by Engr-in-Charge.

Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge

M&L Screed bed or bedding layer 15mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and as directed by Engineer-in-Charge

M & L for non-skid ceramic coloured tiles 7 to 8 mm thick (square/retanglar) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm In floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engineer-in-Charge

S&F Vitrified tiles 10 mm thick, light shade (square/rectangular) polished, area of each tiles n exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15 mm thick screed bed in cement mortar 1:6, complete all as specified and directed.

M&L Rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces and finishing even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge

S&F glazed ceramic coloured tiles 350x250x7mm / 450x300x7mm thick on vertical surfaces, set and jointed in neat cement slurry and pointed in white/colour cement to match over, Complete all as specified and directed by Engineer-in-Charge.

M&L for 25 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including rounding to edges of stone slabs one edges, such as in steps, platform, and other similar situations complete all as specified and directed by Engr-in-Charge.

K A ALIYAR (BID ID -3412939)