samgra shiksha

Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring, sheeting, planking, strutting etc., complete for finished item of work. [Ordinary Soil - Manual means - Upto 3m depth]

Plain Cement Concrete (1:4:8) using 40mm nominal size SS5 hard broken granite metal including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc., complete for finished item of work

VRCC 1:1.5:3 nominal mix (Cement: fine aggregate: coarse aggregate) corresponding to table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry, using a minimum quantity of 400 Kgs of cement per 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing, centering, shuttering etc., complete but excluding cost of steel and its fabrication charges for finished item of work. [FOOTINGS]

VRCC 1:1.5:3 nominal mix (Cement: fine aggregate: coarse aggregate) corresponding to table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry, using a minimum quantity of 400 Kgs of cement per 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing, centering, shuttering etc., complete but excluding cost of steel and its fabrication charges for finished item of work. [PEDASTALS]

VRCC 1:1.5:3 nominal mix (Cement: fine aggregate: coarse aggregate) corresponding to table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry, using a minimum quantity of 400 Kgs of cement per 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing, centering, shuttering etc., complete but excluding cost of steel and its fabrication charges for finished item of work. [PLINTH BEAMS]

VRCC 1:1.5:3 nominal mix (Cement: fine aggregate: coarse aggregate) corresponding to table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry, using a minimum quantity of 400 Kgs of cement per 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing, centering, shuttering etc., complete but excluding cost of steel and its fabrication charges for finished item of work. [COLUMNS]

VRCC 1:1.5:3 nominal mix (Cement: fine aggregate: coarse aggregate) corresponding to table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry, using a minimum quantity of 400 Kgs of cement per 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing, centering, shuttering etc., complete but excluding cost of steel and its fabrication charges for finished item of work. [BEAMS]

VRCC 1:1.5:3 nominal mix (Cement: fine aggregate: coarse aggregate) corresponding to table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry, using a minimum quantity of 400 Kgs of cement per 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing, centering, shuttering etc., complete but excluding cost of steel and its fabrication charges for finished item of work. [RCC SLABS 115mm thick]

Supplying, fitting and placing HYSD bar reinforcement complete as per drawings and technical specifications for bars below 36mm dia. including overlaps and wastage where they are not welded.

Painting to New walls with two coats of acrylic emulsion paint interior grade having VOC (Volatile Organic Compound ) content less than 50 grams/ liter of superior quality of approved brand and shade over base coat of cement primer grade -I making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges etc., complete for finished item of work. EXTERNAL WALSS

Painting to New walls with two coats of acrylic emulsion paint interior grade having VOC (Volatile Organic Compound ) content less than 50 grams/ liter of superior quality of approved brand and shade over base coat of cement primer grade -I making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges etc., complete for finished item of work. INTERNAL WALSS

Cost & Supply of 22/0.3mm (1.5sqmm) FRLS/FRLSH/ZHFR PVC insulated 1100Vgrade as per IS 694/1990 specifications for copper cable to the Government school sites, including all labour charges like Loading & unloading and stacking charges, inclusive of GST and all other Taxes etc., as applicable from time to time, and all other incidental charges etc., complete and confirming to the specifications of IS 694 (2010) & IS 8130 (1984), IS 732 (1989). The item shall carry a warranty period of 5 (Five) years from the date of supply.

Cost & Supply of 20W, 1900 lumens T8, not less than 1100 mm length LED retrofit Tube Light with aluminum anodized body, input voltage AC 220 - 260 Volts with PF>0.9, Surge protection: 2KV,THD<10%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, .etc., complete as per IS 10322 (Part 5/ Sec 1)- 2012 , all fixtures complete , screws, support fixing bushes all relevant & required fixtures etc., complete to the Government school sites,, including all labour charges like Loading & unloading and stacking charges, inclusive of GST and all other Taxes etc., as applicable from time to time, and all other incidental charges etc., Confirming to IS codes 16101 (2012) to 16108 (2012) &IS 732 (1989).

Cost & Supply of ISI 25mm outer dia (1.80 mm thickness) Medium grade FRLS rigid PVC pipe for electrical conduit (For Walls Concealed Wiring) confirming to IS Codes IS:9537 part 3, IS:9537 part 1 and IS 732 (1989) to the Government schools of Andhra Pradesh state, including all labour charges like Loading & unloading and stacking charges, inclusive of GST and all other Taxes etc., as applicable from time to time, and all other incidental charges etc., The item shall carry a warranty period of 5 (Five) years from the date of supply.

Supply of Ceiling Fans of 48 (1200mm) Sweep Ceiling Fan at the rated voltage 230V, Rated frequency 50hz,double ball bearings, air delivery more than 210 cubic meter per minute , Speed more than 350 RPM and Power input not more than 50 Watts with all accessories with 100% copper winding , 230 voltage anti corrosion aluminum body , 3 blades with 1.08mm thick aluminum body and blades having average width of 120mm, down rod with 300mm to 450mm length & 19.2mm outer diameter Heavy Gauge , all the factors of fan shall be of corrosion resisting material or suitably and durably protected against corrosion, including cost and conveyance of all materials ,loading ,unloading, stacking at school site and fixing , inclusive of GST and all other Taxes etc., complete as applicable from time to time, and all other incidental charges etc., complete for finished item of work (As per IS : 374-1979) to the government schools in the state of Andhra Pradesh.

VRCC 1:1.5:3 nominal mix (Cement: fine aggregate: coarse aggregate) corresponding to table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry, using a minimum quantity of 400 Kgs of cement per 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing, centering, shuttering etc., complete but excluding cost of steel and its fabrication charges for finished item of work. [RCC SLABS 100mm thick]

VRCC 1:1.5:3 nominal mix (Cement: fine aggregate: coarse aggregate) corresponding to table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry, using a minimum quantity of 400 Kgs of cement per 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing, centering, shuttering etc., complete but excluding cost of steel and its fabrication charges for finished item of work. [COLUMNS for 1st floor]

VRCC 1:1.5:3 nominal mix (Cement: fine aggregate: coarse aggregate) corresponding to table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry, using a minimum quantity of 400 Kgs of cement per 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing, centering, shuttering etc., complete but excluding cost of steel and its fabrication charges for finished item of work. [CHAJJAS - SUNSHADES]

VRCC 1:1.5:3 nominal mix (Cement: fine aggregate: coarse aggregate) corresponding to table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry, using a minimum quantity of 400 Kgs of cement per 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing, centering, shuttering etc., complete but excluding cost of steel and its fabrication charges for finished item of work. [LINTELS for 1st floor]

VRCC 1:1.5:3 nominal mix (Cement: fine aggregate: coarse aggregate) corresponding to table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry, using a minimum quantity of 400 Kgs of cement per 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing, centering, shuttering etc., complete but excluding cost of steel and its fabrication charges for finished item of work. [ BEAMS for 1st floor]

VRCC 1:1.5:3 nominal mix (Cement: fine aggregate: coarse aggregate) corresponding to table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry, using a minimum quantity of 400 Kgs of cement per 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing, centering, shuttering etc., complete but excluding cost of steel and its fabrication charges for finished item of work. [RCC SLABS 100mm thick 1st floor]

Brick masonry in CM (1:8) with bricks of traditional size 23 x 11 x 7 cm 2nd class including cost and conveyance of all materials and all labour charges etc., complete for finished item of work for in 1st floor

Ornamental Ceiling plastering with CM (1:3), 12mm thick including cost and conveyance of all materials and all labour charges etc., complete.

Plastering with CM (1:5) Single Coat, 12mm thick including cost and conveyance of all materials and all labour charges etc., complete for walls.

Flooring with polished black Kadapa stones of 15 mm thick set over base coat of CM (1:8) over already laid CC bed/ RCC Roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm and jointed with neat cement to full depth including cost of all materials like cement, sand and water and flooring stones etc., complete including labour charges for dressing of flooring stones etc., complete for finished item of work in First Floor

Providing skirting to internal walls to 15 cm height/risers of steps with 8 mm thick mirror polished granite tiles length equal to flooring stones, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials

Supplying, fitting and placing MS grilled door, windows, gate including fabrication charges and all incidental charges etc, cost and conveyance of all materials and all labour charges etc., complete. (make of materials - TATA, Jindal, Sail, Visakha)

Supplying and fixing of stainless steel (grade 304) hand railing as per approved drawing with top rail of 50mm dia pipe and 2mm thick medium class and vertical posts of 50mm dia and 2mm thick medium class 1 No for each 2 steps fixed with base plate of 75mm dia using bonding agent and anchor fastner and welding, drilling of 25mm dia holes with pneumatic compressor for fixing railing, buffing, polishing all members of the railing thouroughly, lacquer finishing to present seamless finish including cost and conveyance of all materials, electrodes, welding charges, cost of all consumables, labour charges , overheads & contractors profit etc., complete for finished item of work for Second Floor