Construction of Category CH Type 4 Towers (224 Quarters) in Various Sectors at Gandhinagar (Part-3)

Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil

Excavation for foundation From Depth 1.50mt to 3.0mt including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil

Excavation for foundation From Depth 3.0mt to 5.0mt including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil

Filling available excavated Earth (Excluding Rock) in trench plinthside of foundation etc.in layer not exceeding 20 cm in depth consolidation each deposited layer by ramming and waterring etc. coomplete.

Filling in plinth with sand under floors including watering, ramming consolidating and dressing etc. complete.

Applying general insecticide pest control treatment to floors, cupboards etc including labour material etc. complete. Using Imidacloprid 30.5 SC as per IS 6313 Part-II (0.075Percent concentration by mass) is recommended 10.5 ml chemical dilluted with 5 liters of water application0.5 liter chemical/Sqmt of surface is recommended as per I.S

Providing and laying in position Ready Mixed M-150 grade concrete for reinforced cement concrete work in Foundations & Plinth, using cement content as per approved Design Mix manufactured in fully automatic batching plant established on site and transported to site of work in transit mixer having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying, excluding the cost of reinforcement and including cost of centering. shuttering, formwork finishing and admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer -In - Charge. Without Fly Ash (Min cement level as per latest IS 456 shall be maintained) For All Floor Level

Providing and laying in position Ready Mixed M-200 grade concrete using cement content as per approved Design Mix manufactured in fully automatic batching plant established on site and transported to site of work in transit mixer having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying, excluding the cost of reinforcement and including cost of centering. shuttering, formwork finishing and admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer -In - Charge. Without Fly Ash (Min cement level as per latest IS 456 shall be maintained) For all R.C.C. memebers at all floor level

Extra for concreting in grade M350 instead of M250 including cost of cement, labour etc. complete.

Extra for concreting in grade M300 instead of M250 including cost of cement, labour etc. complete.

Providing and laying in position Ready Mixed M-250 grade concrete using cement content as per approved Design Mix manufactured in fully automatic batching plant established on site and transported to site of work in transit mixer having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying, excluding the cost of reinforcement and including cost of centering. shuttering, formwork finishing and admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer -In - Charge. Without Fly Ash (Min cement level as per latest IS 456 shall be maintained) for all RCC elements like foundation, slabs, beams, plinth beams, coping, columns, walls chhajja, and stair cases etc at all floor level from below plinth and above plinth level.

Providing cement vata (10cm. x 10 cm. size) quarter round in cement mortar 1:1 including neat cement finishing, watering etc. complete.

Disposing available excavated earth stuff to other location or as per instruction of directed engineer in charge. Up to All lead.No extra payment shall be made for royalty and other government charges.

Providing and laying TMT Bar Fe 550D reinforcement for RCC work including bending, binding and placing in position complete for all floors.

Brick work using common burnt clay conventional building bricks having crushing strength not less than 35 Kg/sqcm. in foundation and plinth and in super structure for All floors in cement mortar 1:6 ( 1 cement : 6 fine sand ) including curing etc. complete.

Half brick masonary in common burnt clay conventional building bricks having crushing strength not less than 35 Kg/Sq.cm. in C.M. 1:4 ( 1 cement : 4 coarse sand ) for All floor including curing etc. complete.

Providing 10 mm. thick cement plaster in single coat on brick/concrete wall ceiling for interior plastering upto floor two level finished even and smooth for All floor including curing etc. complete. In Cement mortar 1:3(1 cement : 3 fine sand)

Providing 15 mm. thick cement plaster in single coat malla on rough side of half brick wall for interior plastering finished even and smooth for All floor level including curing etc. complete. in Cement mortar 1:3 (1 cement : 3 fine sand)

Providing 15 mm thick water proof cement plaster using water proofing powder 1Kg/1bag of cement for all floors on brick / concrete wall work using water proofing materials in C M 1: 3 ( 1 cement 3 coasrse sand) including finishing with a flooting coat of neat cement slurry etc complete for all floors.

20 mm. thick sand face cement plaster on walls for all floors above ground level consisting of 12 mm. thick backing coat of C.M. 1:3 (1 cement : 3 sand) and 8 mm. thick finishing coat of C.M. 1:1 (1 cement :1 sand) including making groove at required distance as directed by architect or engineer in charge etc. complete.

Finishing wall with 100Percent weather proof acrylic exterior emulsion water repellant paint on wall surface (two coats) and one coat of primer to give an required shape even shade after thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials.etc complete for all floors

Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on new wall surface to give an even shade including two coats of lapy ( putty) & two coats of primer of approved brand including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth for all floors.

Providing and laying 600mmx600mm (PVT) vitrified 10 mm thick tile flooring including 10Percent Dark colour tiles for pattern if required over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by adhesive material including dismentaling of existing flooring and jointed with color cement slurry including finised with flush pointing & cleaning the surface etc. complete For all floor as directed by architect or engineer in-charge.

Providing and laying 600mmx600mm (PVT) vitrified Or Anti skid vitrified 10 mm thick tile in Skirting or dedo including 10Percent Dark colour tiles for pattern if required laid on 10 mm. Thick cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointed with white cement slurry with matching pigments including cleaning etc. complete. For all floor as directed by architect or engineer in-charge.

Providing and laying 600mmx600mm Anti skid vitrified 10 mm thick tile flooring including 10Percent Dark colour tiles for pattern if required over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by adhesive material including dismentaling of existing flooring and jointed with color cement slurry including finised with flush pointing & cleaning the surface etc. complete For all floor as directed by architect or engineer in-charge.

Providing and laying Matt Porcelene tiles 300mm x 300mm in flooring in required thickness as per direction of engineer in charge, on a bed of 12 mm. thick polymer modified cement based tile adhesive finished with flush pointing in white cement and as aproved colour,shed and size by architect or engineear in charge. For all floor

Providing and laying Digital printed glazed tiles of approved make , shade and design in skirting and dedo on 10 mm thick polymer modified cement based tile adhesive and jointed with white cement slurry with necessary pigment to match the shade.For all floor as directed by architect or engineer in-charge.

Providing and laying rough chiseled dressed kota stone flooring over 20mm average thick base of cement mortar 1:5 (1-Cement : 5-coarse sand) or L.M. 1:1.5 (1-Lime putty : 1.5 sand) including pointing with cement mortar 1:2 (1-cement : 2-stone dust) etc. complete. (A) 23mm to 25 mm thick kota with 5 mm thick space shall be fixing with cometions groutFor all floor as directed by architect or engineer in-charge.

Providing and laying polished kota stone slab flooring over 20 mm (average) thick base of cement mortar 1:6 (1 cement : 6 coarse sand) or L.M. 1:1.5 laid over and joinetd with grey cement slurry including rubbing & polishing etc. complete (A) 23mm to 25 mm thick, For all floor as directed by architect or engineer in-charge.

Providing and laying Granite slab (16 to 18 mm thick) one side polished flooring over 20 mm (average) base of cement mortar 1:6 ( 1 cement : 6 coarse sand) or L.M. 1:1.5 laid and jointed with grey cement slurry including rubbing & polishing complete, For all floor as directed by architect or engineer in-charge.

Providing and laying 16 to 18 mm thick polished Granite stone slab machine cut in single piece in stair tread of steps laid on 20 mm thick cement mortar 1 : 6 ( 1 cement : 6 coarse sand ) laid over and jointed withgrey cement slurry incl. rubbing, 5mm grove and polishing etc complete. For all floor as directed by architect or engineer in-charge.

Providing and laying 16 to 18 mm thick polished Granite stone slab machine cut in single piece in stair riser of steps and skirting laid on 10 mm thick cement mortar 1 : 3 ( 1 cement : 3 coarse sand ) laid over and jointed withgrey cement slurry incl. rubbing and polishing etc complete. For all floor as directed by architect or engineer in-charge.

Providing and laying 16 to18 mm thick polished Granite stone slab machine cut in single piece in sill and jambs or dedo laid on 10 mm thick polymer modified cement based tile adhesive and jointed withgrey cement slurry incl. rubbing and polishing etc complete. For all floor as directed by architect or Engineer -in-charge

Providing & Fixing Sandwich type Kitchen Platform using Top 16 - 18mm thick granite of approved shade and sample and bottom 23mm to 25 mm thick single side kota stone with 25 mm thick screed of cement mortar 1:3 With granite Facia Patti. and vertical End granite supports. The stone shall be fixed by chassing in to the wall surface and supported vertically with 23mm to 25mm thick sandwich kota stone support including SS Sink of size 610 x 460 mm approved by engineer incharge with waste brass coupling, stainless steel extension nipple, flexible PVC outlay pipe, with swivel spout- wall mount type sink cock etc complete as suggested by Architect/Engineer -in-charge. for all floors.

Supplying and installing of round edge panels, 84mm wide (+/- 10mm) x 15 mm deep (+/- 5mm) of required length . Formed out of 0.50mm TCT Galvanized steel Panel fixed on carriers. Panel shall be powder coated on external surface only. When two panels are to be joined, they shall be joined together by means of panel coupler suitable for 84R Panel. Carrier shall be 20mm wide at bottom and 39 mm deep or as per direction of engineer in charge with cutouts to hold the panel in a module of 100 mm, carrier shall be roll formed out of 0.50 mm coil coated black colour Galvanized steel and cut to a standard length. When two or more carriers are to be joined, they shall be joined together by overlapping. Which will clip on to the holes in the sides of the cut carrier and hold them firmly in place while maintaining the module of 100mm centre to centre or as per direction of engineer in charge. The carrier shall be screwed on GS L-Clit on vertical columns with Corrosion resistive screws of required size at distance not more than 1.5 mtr. centre to centre on which panel shall be clipped to carriers.

Providing and laying Kota stone Shelves in cupboard or any other openings using 23mm to 25mm thick double polished and front edge moulded Kota stone including using sandwich vertical granite support, and fixinng in wall with cement mortar 1:3 ( 1 cement :3coarse sand) and joined with grey cement slurrly including moulding machine cut open edge and charges for making grove in masonary for fixing to the wall as dircted by Engineer in charge etc complete.as per detailed drawing and as Instructed Engineer In charge for all floors.

Providing and laying Cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregates 20 mm. nominal size) and curing complete excluding cost of from work in foundation, plinth, all floors and terrace.

Providing and laying broken chine mosaic flooring for terrace using 12 mm to 20 mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to plain or slope and to be tempered to bring mortar creme out upto surface using white cement including rounding off junctions and extending them upto 15 cm along the wall,clearing with water and oxalic acid etc. as directed.

Providing and fixing 32mm to 35mm thick flush Single door shutter, solid core Confirming to IS:2202 & ISI approved manufacture with Anodized Aluminium section ( door section no 19552-weight not less than 1.116 kg/mt ) frame size 63.5mm x 38mm inserted Non teak wood frame inside the aluminium section for durable grip of hinges(4no each shutter) & Single shutter with required teakwood batten having 1mm thick lamination on both side, including cost of Hydraulic Door Closer , Durable Grip shall be providing with both side 15cm long stainless steel handle and necessary Locking system of , ,fixtures & fastenings etc. directed by engineer in charge.

Providing & fixing Single shutter Door of WPC (Wood Polymer Composite) Frame 100 mm x 63 mm Density 650 Kgm3 wooden inserted and 24/25 mm thick Wood Polymer Composite ( WPC ) Flush Door Having Density of 650 kgm3 with decorative laminate of (marino, greenlam, royale touche, century, signature) with PVC Edge beading surrounding shutter & including S S Aldrop 250mm, both side 15cm long stainless steel handle and necessary Locking system of , ,fixtures & fastenings etc. directed by engineer in charge.

Providing and fixing Deluxe 27 mm series Domal or eqivalent Three track Alluminium window with Frame outer top, bottom and side member size 85 x 45 Jindal section no 21401 With sliding shutters of single glass shutter top bottom & side member size 65 x 25 Jindal section No 21481 with ONE shutter Of SS 304-16mesh x 26 gauge mosquito net of approved shade & Inter lock member size 37 x 31 mm Jindal section no 19442 (all sections should be executed as per direction of engineer in charge) with 5 mm thick transparent bronze colour tinted float glass for fix & Shutter with Colour powder coated aluminum Section, Fittings, Fixtures, Rubber Gasket and transparent silicon sealant glass fixing to frame as per drawing and instruction of Engineer - in charge etc. complete. For window

Providing and fixing standared extruded of alluminium section of of size 63 x 38.10 x 1.2 mm(of Make as approved by Engineer In Charge@ Wt 0.643Kg / Rmt or equivalent weight sections) with colour anodized alluminium frame for ventilation with 5 mm thick frosted glass as details etc complete for Ventilation V.

Providing & fixing M.S. grills of required pattern to frames of windows, ventilation or any other place etc. with M.S. flats of required size and 16mm rod at required spacing & frame around, square or round bars with round headed bolts & nuts or by screws as directed by engineer in charge for all floors(A)Plain grill.

Steel work welded in built up sections, framed work including cutting hoisting fixing in position in beams and joists, channels, angles, tees, flats with connecting plates or angle cleats as in main & cross beamship & jack rafters, purlins connected to common rafters and like for all M.S. structures other than grills.

Painting two coats (including priming coat) on new steel and other metal surface with enamel paint, brushing interior to give an even shade including cleaning the surface of all dirt, dust and other foreign matter.

Providing and fixing Star white wash down water closet squatting pan EWC (Wall hung type W.C. Pan) of standared make or equivalent with Premium seat cover including jet sprey with integral 'P' or 'S' trap including jointing the trap with C. I. soil pipe in C.M. 1:1 including seat cover of standard make premium Health Fauset with hook and fittings and 25 mm dia Flush Cock with C. P. brass wall flange of standard make etc. complete for all floor.

Providing and fixing white earthenware flat back or corner type urinal of size 37 cm x 39 cm x 60 cm (approved quality), including connection with waste pipe, tap, and all necessary fittings, complete

Providing and fixing flat back wash basin of standard make, wall mounted 550 x 400 mm size white with C.I. or M.S. bracket including cutting holes and making good the same including fixing C.P. brass of standard make, and Angular or equivalent stop Cock of standard make, C.P. brass extension nipple 62mm long, S.S. flange water super connection pipe 60cm. long and full thread waste coupling of standard makeetc. complete for all floor.

Providing and fixing C.P.Brass screw down bib cock with flange polish bright 15mm dia of standard make with C.P.brass extension nipple 62mm long etc. complete for all floor.

Item Description

Providing and fixing C.P.Brass Angular Stop cock Polish bright 15mm dia of standard make with C.P.brass extension nipple 62mm long etc. complete for all floor.

Providing and fixing 600mm x 450mm bevelled edge mirrror of superior glass mounted on 6mm thick A.C. sheet or plywood sheet and fixing to wooden pluge with C.P. brass screws and washers. For all floor

Providing and fixing C.P.Brass Towel ring/rod of standard make including necessary S.S.screw and labour etc. complete. as directed by Engineer In Charge.

Providing and fixing C.P.Brass Towel shelf having 4 horizontal rod as a shelf and one rod as a hanger of standard make including necessary S.S.screw and labour etc. complete. as directed by Engineer In Charge.

Providing and fixing C.P. Brass Soap Holder of standard make including necessary S.S. screw with labour etc. complete. as directed by Engineer In Charge.

Providing and fixing 3 flow overhead shower with classik Shower Arm of standard make with 15mm or 20mm or 25mm.inlet. as directed by Engineer In Charge.

Providing and fixing Cansealed Stop cock of standard make regular body of concealed stop cock of suitable for 20 mm pipe line with exposed parts with fitting sleeve, Operating lever & Adjustable wall flange etc. with all and labours as per the instruction of engineer incharge.

Providing and fixing gun metal check or non return full way wheel value.( A ] 25 mm dia.

Providing & fixing Bronze Gate Valve Ball Valve ISI mark of make as approved by Engineer In Charge. complete with using bonding materials rates are including of making good the wall ceiling & floor etc. Complete for 25 mm dia. as directed by architect or engineer in-charge.

Providing & fixing Valve UPVC pipes SCH-80 ISI mark of make as approved by Engineer In Charge of following out side dia. etc.complete with using bonding materials rates are including of making good the wall ceiling & floor etc. Complete for 32 mm dia. as directed by architect or engineer in-charge.

Providing & fixing Valve UPVC pipes SCH-80 ISI mark of make as approved by Engineer In Charge of following out side dia. etc.complete with using bonding materials rates are including of making good the wall ceiling & floor etc. Complete for 40 mm dia.For all floor as directed by architect or engineer in-charge.

Providing & fixing Valve UPVC pipes SCH-80 ISI mark of make as approved by Engineer In Charge of following out side dia. etc.complete with using bonding materials rates are including of making good the wall ceiling & floor etc. Complete for 50 mm dia.as directed by architect or engineer in-charge.

Providing & fixing Valve UPVC pipes SCH-80 ISI mark of make as approved by Engineer In Charge of following out side dia. etc.complete with using bonding materials rates are including of making good the wall ceiling & floor etc. Complete for 100 mm dia.as directed by architect or engineer in-charge.

Providing & fixing NRV Valve made of brass with ISI mark as approved by Engineer In Charge of following out side dia. etc.complete with using bonding materials rates are including of making good the wall ceiling & floor etc. Complete for 100 mm dia.as directed by architect or engineer in-charge.

Providing & fixing Valve UPVC pipes SCH-80 ISI mark of make as approved by Engineer In Charge of following out side dia. etc.complete with using bonding materials rates are including of making good the wall ceiling & floor etc. Complete for 80 mm dia.as directed by architect or engineer in-charge.

Providing & fixing Valve UPVC pipes SCH-80 ISI mark of make as approved by Engineer In Charge of following out side dia. etc.complete with using bonding materials rates are including of making good the wall ceiling & floor etc. Complete for 65 mm dia.as directed by architect or engineer in-charge.

Providing and fixing in position cowel went to pipes.(B) 75mm dia.

Providing and fixing in position cowel went to pipes.(C) 110mm dia.

Providing, fixing, testing & commissoning of GI flanged end lever operated butterfly valve confirming to IS with necessary specials, unions, nipple, GI bolt nut ,EPDM rubber washers as per drawing & specifications etc. complete 50 mm dia.as directed by architect or engineer in-charge.

Providing, fixing, testing & commissoning of GI flanged end lever operated butterfly valve confirming to IS with necessary specials, unions, nipple, GI bolt nut ,EPDM rubber washers as per drawing & specifications etc. complete 80 mm dia.as directed by architect or engineer in-charge.

Providing, fixing, testing & commissoning of GI flanged end lever operated butterfly valve confirming to IS with necessary specials, unions, nipple, GI bolt nut ,EPDM rubber washers as per drawing & specifications etc. complete 100 mm dia.as directed by architect or engineer in-charge.

Providing laying and jointing in true line and level 100 mm dia. U.P.V.C. Pipe ( SCH- 80) for cold water including fittings of make as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concelled as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials. as directed by architect or Engineer -in-charge

Providing laying and jointing in true line and level 80 mm dia. U.P.V.C. Pipe ( SCH- 80) for cold water including fittings of make as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concelled as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials.as directed by architect or engineer in-charge.

Providing laying and jointing in true line and level 65 mm dia. U.P.V.C. Pipe ( SCH- 80) for cold water including fittings of make as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concelled as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials as directed by architect or Engineer -in-charge

Providing laying and jointing in true line and level 50 mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings of make as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concelled as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials as directed by architect or Engineer -in-charge

Providing and fixing conceled center point to wall ceiling and floor CPVC( SDR 13.5) pipe of make as approved by Engineer In Charge having National Senitation Foundation (NSF) seal for potable water of following nominal dia, tube fittings and clamps including making good the wall ceiling and floor etc. complete. 50 mm dia. as directed by architect or engineer in-charge.

Providing and fixing conceled center point to wall ceiling and floor CPVC( SDR 13.5) pipe of make as approved by Engineer In Charge having National Senitation Foundation (NSF) seal for potable water of following nominal dia, tube fittings and clamps including making good the wall ceiling and floor etc. complete. 40 mm dia. as directed by architect or engineer in-charge.

Providing and fixing conceled center point to wall ceiling and floor CPVC( SDR 13.5) pipe of make as approved by Engineer In Charge having National Senitation Foundation (NSF) seal for potable water of following nominal dia, tube fittings and clamps including making good the wall ceiling and floor etc. complete. 32 mm dia. as directed by architect or engineer in-charge.

Providing and fixing conceled center point to wall ceiling and floor CPVC( SDR 13.5) pipe of make as approved by Engineer In Charge having National Senitation Foundation (NSF) seal for potable water of following nominal dia, tube fittings and clamps including making good the wall ceiling and floor etc. complete. 25 mm dia. as directed by architect or engineer in-charge.

Providing and fixing conceled center point to wall ceiling and floor CPVC( SDR 13.5) pipe of make as approved by Engineer In Charge having National Senitation Foundation (NSF) seal for potable water of following nominal dia, tube fittings and clamps including making good the wall ceiling and floor etc. complete. 20 mm dia.as directed by architect or engineer in-charge.

Providing laying and jointing in true line and level 110 dia. P.V.C. SWR ( Type 'B' ) with one end plain and other end socketed with rubber ring , pipe and fittings conforming to IS 13592 of make as approved by Engineer In Charge . pipe shall be fixed on the wall with the help of PVC clamp at every two metre C/C or shall be concelled as directed including necessary fittings such as bends, tee, shoes etc. including testing of pipe and joints and fixing the same with PVC Clamp with adhesive solvent cement including cost of all material.as directed by architect or engineer in-charge.

Providing laying and jointing in true line and level 75 mm dia. P.V.C. SWR ( Type 'B' ) with one end plain and other end socketed with rubber ring , pipe and fittings conforming to IS 13592 of make as approved by Engineer In Charge. pipe shall be fixed on the wall with the help of PVC clamp at every two metre C/C or shall be concelled as directed including necessary fittings such as bends, tee, shoes etc. including testing of pipe and joints and fixing the same with PVC Clamp with adhesive solvent cement including cost of all material.as directed by architect or engineer in-charge.

Providing and fixing to wall ceiling and floors 10.0 Kg. F/Cm2 working pressure I.S.I. mark P.V.C. pipe of 110 mm dia low density of make as approved by Engineer In Charge complete with special flange compression type fitting wall clamps etc. including making good the wall ceiling and floor and trenches.as directed by architect or engineer in-charge.

Providing and fixing to wall ceiling and floors 10.0 Kg. F/Cm2 working pressure I.S.I. mark P.V.C. pipe of 50 mm dia low density of make as approved by Engineer In Charge complete with special flange compression type fitting wall clamps etc. including making good the wall ceiling and floor and trenches.as directed by architect or engineer in-charge.

Supplying and Fixing Chair type M S Brackets 100 to 300mm long (Made from sloted flat of required size) for SWR/RWP/Water supply plumbing (down take) pipe with clamp and nacessary fasteners etc. complete as directed by engineer in charge.

Supplying and Fixing Chair type M S Brackets 300 to 450mm long (Made from sloted flat of required size) for SWR/RWP/Water supply plumbing (down take) pipe with clamp and nacessary fasteners etc. complete as directed by engineer in charge.

Supplying and Fixing Chair type M S Brackets 450 to 600mm long (Made from sloted flat of required size) for SWR/RWP/Water supply plumbing (down take) pipe with clamp and nacessary fasteners etc. complete as directed by engineer in charge.

Providing and fixing PVC SWR Nahni Trap IS 14735 for drain 100 mm dia with jali of following nominal Diameter of self cleaning design with CI scread down or hinged grating including the cost of cutting and making good the wall.

Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and water tight C.I. cover with frame of 300mm x 300mm size (inside) with standard weight.(i) Square mouth traps.(B) 150mm x 100mm size P or S type

Providing and laying in trenches 10.0 Kg. F/Cm2 working pressure I.S.I. mark PVC SWR pipe of 160 mm dia low density pipe of make as approved by Engineer In Charge including fitting etc completein ground.

Providing and laying in trenches 10.0 Kg. F/Cm2 working pressure I.S.I. mark PVC SWR pipe of 250 mm dia low density pipe of make as approved by Engineer In Charge including fitting etc completein ground.

Constructig brick masonary chamber of 500 mm x 700 mm inside dimension and depth upto 0.45 m for under ground CI inspection chamber and bends with bricks having crushing strength not less than 35 Kg/Sqmt. in CM. 1:5 precast fibre reinforced concrete frame & cover of square frame of approx 800x800x150mm & round cover 75mm thick, RCC top slab CC 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) foundation concrete 1:5:10 inside plaster 15 mm thick with cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete.

Extra over items Chamber for every additional depth of 0.1 M. of part thereof beyond 450 mm depth for Brick masonry chamber. (ii) for 500 mm x 700 mm size.

Providing erecting and fixing double coated ISI water tank of required capacity each with all necessary fittings and connection etc. complete on terrace

Providing and fixing 50 mm dia copper metal ball cock of approved quality as directed.

Providing and laying Cinder filling for all floors etc complete: (a) Reffiling in sunk.

Providing and applying Metric Osmotic treatment (Waterproofing, osmotic, cement-based protective product for concrete, single-component, thixotropic covering, resistant to positive and negative hydraulic pressure) of approved make and quality in two coats with uniform finish and complete coverage, over prepared surface free from dust, grease, or loose particles. Surface shall be cleaned thoroughly before application. The treatment shall be applied with brushes only as per manufacturer's specifications and allowed to dry between coats.

Applying water proofing treatment to sunk portion by applying two coat Acrylic Polymer base water guard chemical approved by engineer in charge applied with brush after cleaning of dirt, dust and other foreign material.

Providing and fixing 25 mm thick , 50mm wide Staineless steel letters of any size ( Minimum 300 mm) on 3 mm thick exterior composite panel of any size with all material, hardware, acessories & fittings etc completed.

Item Description

Charges for making holes from 50 mm to 160 mm dia in RCC wall, slabs or any other RCC members having thickness upto 230mm by diamond core cutting machine of HILTI or equivalent including disposing the debris. For all floors .

Providing and Fixing M.S. Powder Coated Letter Box of size 230mm wide x 80mm deep x 280 mm high having gauge of 20 including locking arrangement and fixtures etc. complete as directed by engineer in charge

Design, supply & installation of signages including lettering made of zink sulphide based glow in the dark rigid sheet with high luminous property enclosed in a transperent weather proof U/V stabilised plastic pasted on 3 mm thick clear acrylic sheet sheet.

Providing and laying in position rebar as specified in true line & level including drilling adequate hole, cleaning the same, grouting with HILTI, HY - 200 rebar system as per manufacturers specifications strictly in accordance with structural details having minimum depth of embedment 125, etc complete For all floors (a) 10 to 12 mm dia

Providing and fixing GI chicken mesh jali 12.5 mm x 24 swg at R.C.C. masonry joints at any height with all labour & material etc. complete.

Providing and fixing in position S.S. 304 railing for Balcony (considering 0.95 meter hight) by providing vertical Square pipe support of 40 x 40 mm with jula . pipe on top 50 mm dia stain less steel pipe rail including bending welding and fixing in R.C.C./brick work as directed. (top 50 dia vertical, vertical Square pipe 40 x 40 mm at 0.9 mt. c/c & horizontal 4 no Square pipe -25 x 25 mm. and all pipe with 1.5mm thickness). for all floor

Providing and fixing in position S.S. 304 Hand Rail for Balcony by providing vertical round pipe support of 15 mm dia pipe on top of 50 mm dia stain less steel pipe rail with starting and end point SS Cap including bending welding and fixing in R.C.C./brick work as directed. (Horizontal 50 dia. and Vertical Round pipe of 25 mm dia as per required and all pipe with 1.5mm thickness). for all floor as directed by engineer in charge.

Providing & Filling 5 mm wide Epoxy Grouting in Vitrified Flooring & Wall Dedo etc. Complete.

Providing and fixing Stainless Steel Gate at Staircase entrance with 50 mm dia top Pipe and vertical supports of 40x40x1.5 mm Square Pipe framing with SS shutters with door frame 25x25x1.5 mm - 2 shutters and internal 3/4" dia steel pipes at required spacing, including fabricating, fixing in position in line and level, all SS Fixtures etc. complete.

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete block 60mm thick with grade of concrete M300 pnumatic compressed / vibrated mechanically and as per approved design Confirming to IS 15658 : 2006 including 35 mm Sand layer for levelling and filling the joint with sand in proper line and level as per guidlines of IRC : SP 63-2018 etc. Complete.

Providing and Fixing 15 mm thick 300 mm x 300 mm Tactile Warning Tiles (Attention Tiles i.e. Tactile Warning Surface Indicator {TWSI}) of Tac Button Yellow Plus or equvqlent make in flooring laid on 20 mm thick cement mortar 1:6 (1 cement : 6 coarse sand) on new surface and jointed with cement slurry including finished with flush pointing & cleaning the surface for all floors as per detailed drawing etc. complete as directed by Architect or Engineer in charge. Thse tiles shall be Anti Skid, Chemical Resistant, Fade Proof, Frost - Heat & Weather Proof, High Flexural Strength, Highly Durable, Stain Resistance . All Tactile Warning Tiles meet the specific size and dimension standards as required by ISO/FDIS 23599.

Providing and fixing 30 mm wire gauge shutters using galvanised M.S. wire of I.S. gauge designation of 85G with wire of 0.56 mm dia, for doors, windows and clerestory windows including bright finished or/and black enamelled M.S. butt hinges with necessary mango wood or equivalent quality.

Providing and applying black japan treatment of approved make and quality in two coats with uniform finish and complete coverage, over prepared surface free from dust, grease, or loose particles. Surface shall be cleaned thoroughly before application. The treatment shall be applied with brushes only as per manufacturer's specifications and allowed to dry between coats.

Providing and fixing hollow metal door with frame made from galvanized iron (GI) sheets, ensuring stability and integrity. The door leaf shall be 30 to 35mm thick, double skin, fabricated from 1.2mm thick GI sheet with honeycomb infill, and finished with powder coating in approved shade. The frame shall be 100x50mm single rebate profile made from 1.5mm thick GI sheet with inbuilt groove, powder coated to match. Door shall be fitted with stainless steel hinges (4 nos. per shutter), aluminum handles, and door magnets to retain the door in closed position. The door should open up to 170 degrees for ease of access. All components shall be factory prepped, field assembled, and installed complete with all necessary hardware, accessories, and fixings as per manufacturer’s specifications.

Covering Wardrobe Niche: All the exposed opening gap of Niche and Pelmet to cover vertical wall offsets should be cladded by Machine laminated 16 mm Plywood confirming to IS 303. FRAMING is to be done with plywood with open faces laminated plywood sheet. OPENABLE DOORS are made from both side Laminated (one side white and one side decorative or as per direction of EIC) Plywood Panels, 16 mm Plywood confirming to IS 303 and extra support strap of 16 mm laminated plywood. all the plywood edges is to be covered with 0.8mm edge bands fixed with hot melt glue machine pressed. shutters to be fixed on frame with Auto closing hinges as approved by EIC(make kich, hafele, hettich) and has provision for aligning and leveling with carcass surface. SS handles of size greater than 150 mm as approved by EIC (make kich/ hafele/ hettich). all the gaps are to be filled with silicon as per direction of engineer incharge.

Providing and fixing drawer type kitchen basket cupboard using Plywood of 16 to 18 mm thick for frame and Shutter , With 0.8 mm thick decorative lamination sheet on Front Side & Inside 0.8mm thick plain lamination sheet . S.S. telescope channel of required size, or S.S. fixtures & fastening, handle as approved quality including using necessary screws, fevicol, pvc batten including fixing S.S. basket of 19" x 20" (1) Plain multi purpose 100 mm-2 no (2) Cup soucesser 100 mm-1 No (3) Plate 100 mm -1 No (4) Thali 200 mm -1 No (5) Vegetable plain 200 mm -1 No including fixing S.S. telescope channel as per approved quality and given detail drawing etc. complete.

Providing & fixing Loft shutters with frame using 16 to 18 mm thick all proof ply wood and fixing on 0.8 mm thick decorative lamination sheet on Front Side & Inside 0.8mm thick plain lamination sheet . PVC bedding and necessary S.S. fixtures & fastening, nails, fevicol, magnet etc. complete.

Providing and filling holes/gaps of any lenght/depth in reinforced cement concrete (RCC) or in masonary of dia upto 250 mm using factory-packaged, non-shrink, free-flowing, high-strength cementitious grout such as GP2 of approved brand as directed by engineer in charge for all floors.

Drilling pilot borehole of size 250/300 mm at above site by mud flush direct rotery rig.

Reaming of 250/300 mm dia.Pilot borehole to size 550 mm dia. Incliding assembling ,lowering housing ,casing strainerpipers with gravel packing and clayball packing etc.

Development of cach water bearingzone coming across the full depth of tubewell by lowering 100 mm dia.Droplineand 32 mm dia airline for each water bearing Zone with suitabale capacity air compressar up to avilability of sand free discharge.

900 CFM /200 PSI capacity air compressar upto the availability of sand free discharge for upto 250 mtrs

Supply of M.S. E.R.W. plain end medium duty pipe confirming to IS 4270/2001 with latest amendments Of size 250 mm dia (minmum thicknes of 7.1 mm)

Screen Slotting of MS ERW balnce pipe with size of slot 6.75 cm X 6.35 cm X 3.12 mm for 250 mm dia pipe

Supply of miscellenious bore material suitable to 250 mm dia pipes as following (A) MS Bore clamps made from M.S. plate with 3 holes on either side with nuts & bolts of std make of size 900X100X16 mm flat suitable for 250 mm dia pipe.

Supply of miscellenious bore material suitable to 250 mm dia pipes as following (B) MS Bore Plug having 100mm height made from M.S. plate with 3 holes at equal distance on circumferrence for nut-bolts type, locking arrrangement with nuts-bolts & lock nuts of std make complete from 5 mm thick M.S. plate suitable for 250mm dia pipe.

Supply of miscellenious bore material suitable to 250 mm dia pipes as following (C) MS Bail Plug having length 0.45 mtr from medium class pipe as per I.S. suitable for 250 mm dia pipe.

Supply of miscellenious bore material suitable to 250 mm dia pipes as following (D) Steel bent plate suitable for ERW pipe for 250mm dia (size:200 X 150X6 mm)

Electrologging of Pilot bore hole with carting.

Geohydrological ground water investigation including vehicle charges for three phase DTH bore/DR tube well including water sample testing & chemical analysis

Providing, supplying and commissioning ISI mark CI D/F Reflux Valves of following class and diameter including all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to departmental stores stacking etc. complete. Reflux valves PN 1 IS 5312 with ISI mark size: 100 mm

Providing and laying in trenches galvanised mild steel tubes (Midium grade) of the following nominal bore, and tube fitting (Earthwork in trenches to be measured and paid for separately (H) 80mm

Constructing manhole with R.C.C top slab in 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) foundation concrte 1:3:6 mix (1 cement : 3 coarse sand : 6 brick bats 40 to 50 mm nominal size) inside plastering 15 mm thick with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a floating coat of neat cement slurry and making channels in cement concrte 1:2:4 mix ( 1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) finished smooth complete including curing & testing (I) Inside size 900 mm x 1200 mm and 1.50 meter deep including FRC cover with frame size 560 mm diameter (A) with 230 mm thick walls of brick masonry using bricks having crushing strength not less than 35 Kg / Sqcm in cement mortar 1:5 (1 cement : 5 coarse sand) (1) A-type depth 0.90 meter for 150 mm diameter sewer.

Constructing manhole with R.C.C top slab in 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) foundation concrte 1:3:6 mix (1 cement : 3 coarse sand : 6 brick bats 40 to 50 mm nominal size) inside plastering 15 mm thick with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a floating coat of neat cement slurry and making channels in cement concrte 1:2:4 mix ( 1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) finished smooth complete including curing & testing (I) Inside size 900 mm x 1200 mm and 1.50 meter deep including FRC cover with frame size 560 mm diameter (A) with 230 mm thick walls of brick masonry using bricks having crushing strength not less than 35 Kg / Sqcm in cement mortar 1:5 (1 cement : 5 coarse sand) (2) B-type depth 1.50 meter for 300 mm diameter sewer.

Constructing manhole with R.C.C top slab in 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) foundation concrte 1:3:6 mix (1 cement : 3 coarse sand : 6 brick bats 40 to 50 mm nominal size) inside plastering 15 mm thick with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a floating coat of neat cement slurry and making channels in cement concrte 1:2:4 mix ( 1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) finished smooth complete including curing & testing (I) Inside size 900 mm x 1200 mm and 1.50 meter deep including FRC cover with frame size 560 mm diameter (A) with 230 mm thick walls of brick masonry using bricks having crushing strength not less than 35 Kg / Sqcm in cement mortar 1:5 (1 cement : 5 coarse sand) (3) C-type depth 2.25 meter for 300 mm diameter sewer.

Extra rate for constructing B.B masonry for every additional depth 0.10 meter or part thereof over item 24.27 (I) for depth from 0.90 meter to 1.50 meter.

Extra rate for constructing B.B masonry for every additional depth 0.10 meter or part thereof over item 24.27 (II) for depth from 1.50 meter to 2.25 meter.

Extra rate for constructing B.B masonry for every additional depth 0.10 meter or part thereof over item 24.27 (III) for depth from 2.25 meter to 3.15 meter.

Providing and laying (To level or slopes) and jointing reinforced concrte loght duty Non-pressure pipes I.S Class NP2 of the following internal diameter with collars and butt ends prepared for collar joints including testing of joints complete. (D) 300 mm diameter

Providing and laying precast FRC cover of 600*600 mm size for chamber including cost of labour, material etc. TMT bar and cost of from work curing etc complete as directed by engineer in charge.

Supplying and laying of screened rounded gravel of 25 to 90 mm, 20 to 50 mm and 5 to 20 mm size filling in layers or packing around stainer pipe etc.complete.

Drilling 600 mm dia. Bore in Alluvial,sandy strata including cost of bentonite powder, carting of ring. etc. complete drilling shall be done by mud flush rotary equipment borehole shold withstand unceased at least 72 hours.including development of bore by compression of required capacity as directed.

Providing and lowering jointing 6kg/cm2 PVC strainer pipe 250 mm diameter HDP first class confirming with IS : 4935 including cost of outer camp solution etc.complete.

Providing and fixing concertina razor blade coil fencing with punched tape concertina coil 600 mm dia 45 mt openable length having 24 no rounds per 6 mt length, upto 3mt height of wall with new angle iron (50mm x50mm x5mm )requird shaped As per Directed Engeenier in charge. placed 2.4mt or 3.00mt apart and with 4 horizontal R.B.T. reinforced barbed wire(3 mm) , stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I.barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape (R.B.T.)/Spring core (2.5 mm thick) and weight 43.478 gm/meter at compound wall.

Provision and installation of a precast wall, incorporating rectangular RCC poles with dimensions of 0.15m x 0.15m placed at intervals of 2.10m center-to-center on the ground. The construction process includes excavation in CC 1:5:10 (cement: sand: aggregate) at a size of 0.30m x 0.3m x 0.6m. The completion of the task entails fitting 50mm thick precast RCC plates between the poles. This comprehensive undertaking covers all essential fittings, labor charges, and associated expenses, ensuring the precast wall's completion in accordance with the specified requirements.

Removing and refixing of precast compound wall consisting of rectangular RCC poles of size 0.15m x 0.15m placed at 2.10m center-to-center, and 50mm thick, 2.10m long precast RCC plates fitted between the poles. The work includes careful dismantling of existing wall components without damage, excavation of foundation pits of size 0.30m x 0.30m x 0.60m in cement concrete 1:5:10 (cement: coarse sand: aggregate), relaying of foundation, and proper alignment of poles and plates. The rate includes all materials, labor, transportation, necessary fittings, and tools required for completing the work in line, level, and as directed by the Engineer-in-Charge.

Box cutting the road surface to proper slope and camber for making a base for road work including removing the excavated stuff and depositing on the road side slope as directed upto 50Mt.lead.

Providing & laying 150 mm thick compacted granular coarse sand including spreading, watering and consolidation etc. complete.

Item Description

Providing and laying, spreading and compacting B.T.M.C. stone aggregates of 63mm to 40mm size to W.B.M.150mm thick including spreading in uniform thickness, hand packing, rolling with vibratory roller 8-10 tones to proper grade and camber, applying and brooming requisite type of screening / binding / filler materials to fill up the interstices of coarse aggregate, watering and compacting to the required density. Grading - II using screening type - A (13.2mm Agg.) etc. complete.

Providing and laying in position Ready Mixed M-250 grade concrete using cement content as per approved Design Mix manufactured in fully automatic batching plant established on site and transported to site of work in transit mixer having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying, excluding the cost of reinforcement and including cost of centering. shuttering, formwork finishing and admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer -In - Charge. Without Fly Ash (Min cement level as per latest IS 456 shall be maintained), Including TRIMIX usinng P21(water reducing concrete admixture at 100 ml per bag of cement & recon 3 s fiber at 125 gm per bag of cement including making C channel 75 x 75 mm required to maintain level,slope and thickness of the concrete road leveling of placed concrete with surface vibrator and finishing with power floater & trowel light brooming the surface & including Construction joints to be formed at every 5 mt distance by grooving with mechanical saw within 48 hrs. Groove/sawed joints shall be made of 5 mm width and depth min (1/3 rd depth of the pavement) as shown in the drawing and shall be filled with ready to use PU sealant of UV gradecutting & filling of expansion joint as directed by Engineer in charge.

Providing and fixing pre-cast concrete kerb stone of gray cement based concrete block 30cm length,30cm height and 15cm thick of M250 grade concret as per approved design and including excavation for fixing in proper line and level,filling the joint with C:M 1:3 (1cement:3fine sand) etc complete.

Road marking with hot applied thermoplastic paints with reflectorising glass beads on bitumin surface providing and laying a hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250gms per sqm area, thickness of 2.5mm is excluding of surface applied glass beds as per IRC:35-2015. The finished surface to be level, uniform and free from streaks and holes. zebra patta /bump patta lane/center line/ edge line/cut patta. The white color marking should provide liminance coefficinet on cemend road shalll be min 130 mcd/m2/lux and Asphalt road shall be min 100 mcd/m2/lux during the service life during the day time. The marking should meet the performance criteria for night time reflectivity, wet reflectivity and skid resistance as mentioned in the section-15 of IRC 35-2015. Warranty for the Retro reflectivity should be two years.

Providing and fixing in position Children Playground Equipment ROTO/LLDP wave slide of length 13' 6" x 2'5" x 5' with main support pipe 76 OD GI A classm supporting pipe 27 OD GI A class, ladder 25x50 & connecting pipes 33 OD including making foundation in plain cement concrete etc. complete as directed by engineer in-charge.

Providing and fixing in position Children Playground Equipment Marry Go Round Platform type 4' x 4' x 3 size having base FRP with inbuilt moulding 32x32 pipes, hand railing 33 OD pipe including making foundation in plain cement concrete etc. complete as directed by engineer in-charge

Providing and fixing in position Double Swing A type double swing 8' x 5' x 8' having main pipe 76 OD A class, Top Pipe 60 OD GI A class, All GI pipes powder coated, seating rubber belt, rubber coated chains with 6 mm link including making foundation in plain cement concrete etc. complete as directed by engineer in-charge.

Providing and fixing in position Double See Sow 8' x 4' x 3' having bottom frame 60 OD GI A class pipe mechanism 40x80 box pipe, seating 76 OD GI A class LLDPE seats, handle 27 OD GI A class pipe including making foundation in plain cement concrete etc. complete as directed by engineer in-charge.

Providing and fixing ISI marked CI D/F sluice valves as per IS 14846 (lattest edition) of following class and diameter including all taxes, insurance, transportation, feight charges, octroi, inspection charges, loading, unloading, conveyance to the department store or site etc. complete. (150 mm dia)

Providing and fixing 150mm diameter non return valve with gunmetal working parts as per IS including.

Providing and fixing ISI marked CI D/F sluice valves as per IS 14846 (lattest edition) of following class and diameter including all taxes, insurance, transportation, feight charges, octroi, inspection charges, loading, unloading, conveyance to the department store or site etc. complete. (100 mm dia)

Providing and fixing 100mm diameter non return valve with gunmetal working parts as per IS including.

Providing and fixing 63mm Gun metal / SS single outlet type hydrant valve as per IS 5290 with ISI marked 75 mm inlet and 63mm female instantaneous coupling rubber washer and cast iron hand wheel operation with close and open direction as directed.

Providing and fixing 63mm dia Gun metal /SS branch pipe of standard length with 20mm bore hexagonal nozzle as per IS 903 with ISI marked as directed.

Providing and fixing 63mm Parole fire hose of approved grand conforming to IS 636 type B having crushing pressure of 37.20 kg/cm 2 of ISI marked of 15 mtr length fitting with necessary S.S 63mm delivery hose coupling as IS 903 with ISI mark bided with GI wire etc complete directed.

Mild steel box hose cabinet of 18SWG of suitable size with looking arrangement and 3mm thick glass panel to accommodate 1 Nos of hose pipe (15mtr) and 1 No. GM / SS branch pipe etc painting red colors etc as directed.

Providing and fixing first aid hose reel wall mounting fix type having side of the hose reel made of MS providing with 30mtr long thousand six length 25mm dia PVC nylon braided flexible hose with S.S shut off nozzle of approved quality etc complete as directed.

supplying and installing and conmissing of CI flanged Y type Strainer with SS mesh suitable flanges, nuts, bolts, gasskets, etc complete. For 200 mm pipe suction inlet

Providing dry chemical powder type fire extinguishers of 5 kg/Capacity with ISI mark (IS 2171) etc as directed.

Providing carbon dioxide type fire ext 4.5KG capacity with ISI mark

Wrapping and coating of 150 mm / 100mm MS pipe as per direction of engineer incharge for protection of MS pipe from the corrosion.

Design, supply & installation of safety signage made of zinc base glow in the dark rigid sheet with high luminous with pasted on 3 mm thick on rigid PVC foam sheet. Such as EXIT EMERGENCY EXIT. Do not use lift etc.

supplying and installing Pressure gauge for Entire System with required fittings as per direction of engineer incharge.

Supply installing Testing & Commissioning of Fire Alram System with Manual Call Point at eache floor (G+7) with Hotter and Panel System Set at ground floor including cost of all wiring.

Providing and fixing 65mm diameter non return valve with required acessoriesfor UGWT Pump connection with all required aceessories, solutions etc. complete

Prviding and fixing quartzoind bulbty pe ss sprinkler head suitable sustaining pessure on seat and water hamer effect. The type and temperature rating shall be as follows (a) 57 degree sprinkler

Providing and fixing 100mm diameter wefer plate non return valve with CI Body and SS Plate working parts as per IS including.

Providing and fixing in postion 25 mm ball valve to be fixed in Hose Real

Providing and fixing 80mm diameter non return valve with CI Body and SS Plate working parts as per IS including.

Supply, installation and testing and commissioning of SS - 4 way Fire Brigade in let connection with 63 mm instantaneous coupling with isolation valve, plug, cap, chain complete in all respect etc. complete

Providing and fixing Hose Clamp to be fixed in Hose Real connection etc. complete

Providing and fixing Hose Coller to be fixed in Hose Real connection etc. complete

Providing MS air cushion tank on top of each riser fabricated from 6mm thick MS plate, 300 mm in diameter and 1.5 m in height with dished ends fabricated from 8mm thick MS plate with Air release valve with stop cock, flanged inlet connection and drain arrangement with 25mm dia valve, pressure gauge with gun metal stop cock complete with all accessories as required and conforming to IS 4736-1968. (The cushion tank should be suitable for rated working pressure.)

Fixing, testing & commissioning of MS air cushion tank on top of each riser fabricated from 6mm thick MS plate, 300 mm in diameter and 1.5 m in height with dished ends fabricated from 8mm thick MS plate with Air release valve with stop cock, flanged inlet connection and drain arrangement with 25mm dia valve, pressure gauge with gun metal stop cock complete with all accessories as required and conforming to IS 4736-1968.

Providing Foot Valve of of 4" diameter approved make including all required accessories etc. complete

Installing, testing and comissioning 4" Foot Valve including all required accessories etc. complete

Providing Foot Valve of of 6" diameter approved make including all required accessories etc. complete

Installing, testing and comissioning 6" Foot Valve including all required accessories etc. complete

P & Fixing GI Air Release Valve 25 mm set including all required accessories etc. complete

Supply , installation , testing & commissioning of SS 304 25 mm Pressure Safety / Relief Valve Range 0 - 12 Kg. / Cm2 complete with all accessories

Supply, fabrication & erection of aboveground G.I. 'C'-Class, ERW piping, conforming to IS:3589, for size 200 mm dia. & above, thickness. G.I. pipe fitting's as per IS: 3589, for size 200 mm dia. above, flanges, nuts bolts & washers, 3 mm thick gasket, pipe hangers, etc. Hydrostatic testing for 2 hour's at 150Percent of the system pressure, hook-up etc. Painting for piping, fittings & structural pipe support, shall be two coat of zinc primer and two coats of fire red conf. to IS: 5, Shade 536. Complete with all accessories as per approved drawings, specicification and direction of the Engineer-in-Charge, with all complete. 200 mm dia.

Supply, fabrication & erection of aboveground G.I. 'C'-Class, ERW piping, conforming to IS:1239, part-I, Heavy class 150mm dia., thickness. G.I. pipe fitting's as per IS: 1239, part-II, Heavy class for size 150mm dia. , flanges, nuts bolts & washers, 3 mm thick gasket, pipe hangers, etc. Hydrostatic testing for 2 hour's at 150Percent of the system pressure, hook-up etc. Painting for piping, fittings & structural pipe support, shall be two coat of zinc primer and two coats of fire red conf. to IS: 5, Shade 536. Complete with all accessories as per approved drawings, specicification and direction of the Engineer-in-Charge, with all complete. 150 mm dia.

Supply, fabrication & erection of aboveground G.I. 'C'-Class, ERW piping, conforming to IS:1239, part-I, Heavy class 100mm dia., thickness. G.I. pipe fitting's as per IS: 1239, part-II, Heavy class for size 100 mm dia. , flanges, nuts bolts & washers, 3 mm thick gasket, pipe hangers, etc. Hydrostatic testing for 2 hour's at 150Percent of the system pressure, hook-up etc. Painting for piping, fittings & structural pipe support, shall be two coat of zinc primer and two coats of fire red conf. to IS: 5, Shade 536. Complete with all accessories as per approved drawings, specicification and direction of the Engineer-in-Charge, with all complete. 100 mm dia.

Supply, fabrication & erection of aboveground G.I. 'C'-Class, ERW piping, conforming to IS:1239, part-I, Heavy class 80mm dia., thickness. G.I. pipe fitting's as per IS: 1239, part-II, Heavy class for size 80 mm dia. , flanges, nuts bolts & washers, 3 mm thick gasket, pipe hangers, etc. Hydrostatic testing for 2 hour's at 150Percent of the system pressure, hook-up etc. Painting for piping, fittings & structural pipe support, shall be two coat of zinc primer and two coats of fire red conf. to IS: 5, Shade 536. Complete with all accessories as per approved drawings, specicification and direction of the Engineer-in-Charge, with all complete. 80 mm dia.

Supply, fabrication & erection of aboveground G.I. 'C'-Class, ERW piping, conforming to IS:1239, part-I, Heavy class 65mm dia., thickness. G.I. pipe fitting's as per IS: 1239, part-II, Heavy class for size 65 mm dia. , flanges, nuts bolts & washers, 3 mm thick gasket, pipe hangers, etc. Hydrostatic testing for 2 hour's at 150Percent of the system pressure, hook-up etc. Painting for piping, fittings & structural pipe support, shall be two coat of zinc primer and two coats of fire red conf. to IS: 5, Shade 536. Complete with all accessories as per approved drawings, specicification and direction of the Engineer-in-Charge, with all complete. 65 mm dia

Supply, fabrication & erection of aboveground G.I. 'C'-Class, ERW piping, conforming to IS:1239, part-I, Heavy class 50mm dia., thickness. G.I. pipe fitting's as per IS: 1239, part-II, Heavy class for size 50 mm dia. , flanges, nuts bolts & washers, 3 mm thick gasket, pipe hangers, etc. Hydrostatic testing for 2 hour's at 150Percent of the system pressure, hook-up etc. Painting for piping, fittings & structural pipe support, shall be two coat of zinc primer and two coats of fire red conf. to IS: 5, Shade 536. Complete with all accessories as per approved drawings, specicification and direction of the Engineer-in-Charge, with all complete. 50 mm dia.

Supply, fabrication & erection of aboveground G.I. 'C'-Class, ERW piping, conforming to IS:1239, part-I, Heavy class 25mm dia., thickness. G.I. pipe fitting's as per IS: 1239, part-II, Heavy class for size 25 mm dia. , flanges, nuts bolts & washers, 3 mm thick gasket, pipe hangers, etc. Hydrostatic testing for 2 hour's at 150Percent of the system pressure, hook-up etc. Painting for piping, fittings & structural pipe support, shall be two coat of zinc primer and two coats of fire red conf. to IS: 5, Shade 536. Complete with all accessories as per approved drawings, specicification and direction of the Engineer-in-Charge, with all complete. 25 mm dia.

Supply, installation and testing and commissioning of SS - one way Fire Brigade in let connection with 63 mm instantaneous coupling with isolation valve, plug, cap, chain complete in all respect etc. complete

5 kg Moduler Fire Extinguisher (Gr. Floor Electrical Room) including all required accessories etc. complete

Item Description

Point wiring for Modular secondary light point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade FRLSH PVC insulated multi strand copper wires, in below type of pipe to be erected complete with earth continuity and necessary connection with primary light with accessories erected on Metal / PVC / wooden box covered with 3 mm thick PC(Polycarbonate) / Acrylic sheet for open / concealed wiring. with necessary Lamp holder / ceiling rose / H.D.Connector as directed.(Note:- Maximum up to 6 mtrs length, excess will be considered as Mains for Secondary Point.) (f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete.Cat.III

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLSH PVC insulated multi strand copper wires up to 10 mtr length , in below type of pipe erected with 6A Modular type switch / bell push & accessories and earth continuity of following type, erected on PVC / Metallic/Wooden box, single mounting base frame covered with textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe erected, with necessary Lamp holder with adaptor/ceiling rose / H.D.Connector as directed.(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete.Cat.III

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLSH PVC insulated multi strand copper wires up to 10 mtr length , in below type of pipe erected with 6A Modular type switch / bell push & accessories and earth continuity of following type, erected on PVC / Metallic/Wooden box, single mounting base frame covered with textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe erected, with necessary Lamp holder with adaptor/ceiling rose / H.D.Connector as directed.(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete.Cat.III. (For Bathroom )

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLSH PVC insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected with 6A Modular type switch and hum free EME step type electronic fan regulator mounted and accessories with earth continuity of following type erected on PVC / Metallic/Wooden box, single mounting base frame covered with textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe erected. with necessary ceiling rose / H.D.Connector as directed.(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete.Cat.III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLSH PVC insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected complete with Modular type switch & 5 pin Plug erected on PVC / Metallic/Wooden box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of accessories.[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb db board.(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete.Cat.III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLSH PVC insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected complete with Modular type switch & 5 pin Plug erected on PVC / Metallic/Wooden box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of accessories.(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete.[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb db board.Cat.III

Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC / Metallic/Wooden box, single mounting base frame covered with textured / metallic/white front plate modules erected on / in wall / ceiling with following type accessories.Cat.III

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (green) both are of .ISI marked 1.1 KV grade FRLSH PVC insulated multi strand copper wires erected in below type of pipe with 6A Modular type switches and following type of accessories erected on PVC / Metallic/Wooden box, single mounting base frame covered with textured / metallic/white front plate modules erected on / in wall / ceiling as per pipe erected. with necessary batten/angle holder or ceiling rose or H.D.Connector as directed.(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete.Cat.III

Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single mounting base frame covered with textured / metallic/white front plate , modules erected with necessary connections as per site situation directed by Engineer In charge.(4) TV Co-axial Socket outlet.Cat.III

Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single mounting base frame covered with textured / metallic/white front plate , modules erected with necessary connections as per site situation directed by Engineer In charge.(5) Electronic hum Free steps EME Fan regulator.Cat.III

Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single mounting base frame covered with textured / metallic/white front plate , modules erected with necessary connections as per site situation directed by Engineer In charge.(7) Blank Plate Single cat-III

Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single mounting base frame covered with textured / metallic/white front plate , modules erected with necessary connections as per site situation directed by Engineer In charge.(9) 16 Amp. SP one way switch.Cat.III

Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single mounting base frame covered with textured / metallic/white front plate , modules erected with necessary connections as per site situation directed by Engineer In charge.(10) 6/16Amp. Universal socket cat-III

Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single mounting base frame covered with textured / metallic/white front plate , modules erected with necessary connections as per site situation directed by Engineer In charge.(14) 6A/ 10A/ 16A/ 20A/ 25A/ 32A Double Pole Modular MCB Switch.Cat.III

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or ceiling erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in approved manner as directed (a)20 mm

Providing & erecting PVC Corrugated Flexible Conduit with required nos. of coupling, PVC bushes, Check-nuts etc. complete of following sizes.(2) 25 mm.

Providing and erecting Mains with 1.1 KV grade FRLSH PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLSH PVC insulated stranded wire of green colour for earth continuity of following size.(A) With medium class Rigid PVC pipe and accessories.(a) 2 wire 1.5 sq. mm

Providing and erecting Mains with 1.1 KV grade FRLSH PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLSH PVC insulated stranded wire of green colour for earth continuity of following size.(A) With medium class Rigid PVC pipe and accessories.(b) 2 wire 2.5 sq. mm

providing and erecting Mains with 1.1 KV grade FRLSH PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLSH PVC insulated stranded wire of green colour for earth continuity of following size.(a) with medium class rigid PVC pipe and accessories. (b) 2 wire 6 sq. mm

providing and erecting Mains with 1.1 KV grade FRLSH PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLSH PVC insulated stranded wire of green colour for earth continuity of following size.(a) with medium class rigid PVC pipe and accessories.(c) 2 wire 10 sq. mm.(use earth wire of 4 sq.mm )

providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor with heat resistant PVC insulated conforms to IS 694, IEC - 227 erected in existing pipe of following size (Specifically for control panel, relays, power switchgears, motor starters & control wiring) with required size of copper lugs, nuts and bolts if required.(e) One wire 6.00 sq. mm

Supplying and erecting Flexible PVC insulated multistrand multicore 1.1 kv grade ISI marked copper wires of following size to be erected as directed. e) 1.50 Sq.mm 3 core round PVC sheathed

Providing & Erecting approved make following size of TV Co-axial flexible cable comprising inner conductor of solid bare copper insulated with Foam PE & Secondary conductor made of poly - Aluminium film bonded Al. Braids @ suitable coverage overall sheathed with black PVC insulation.e).RG-11.

Providing & Erecting 3mm thick acrylic Sheet with grooving as directed

Providing & erecting Switch board for Computer or electric apparatus consisting of following modular type accessories mounted with PVC / Metallic concealed/open box with single mounting base frame covered with textured/metallic /white front plate,modules erected with necessary connections as directed.1 no. 6A/16A universal plug-switch combined.3 nos. 6A Switch.3 nos. 6A 5 pin Plug.For Modular Type Accessories.Cat.III

Decorative call bell Ting-tong box type 250 volts complete erected

Supplying and erecting led lamps with following wattage capacity of 220 to 240 voltage, minimum 15000 burning hours life, 500 V in built-surge protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22 lamp holders, pf >Equal 0.5.(A) LED Lamps integral type, with PC diffuser suitable LAMP holder.(iii) 10 to 15 watts.Cat.III

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 35 KA. at 415 V. having normal current rating 125A. with Fixed thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all internal connections, spreader tinned copper & complete erected in existing 16 G.M.S. housing.ICSEqual100Percent of ICU only.Cat III

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 35 KA. at 415 V. having Normal current rating 200A.with variable Thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all internal connections, spreader tinned copper & complete erected in existing 16 G.M.S.housing.Cat.III.ICSEqual100Percent of ICU only.Cat III

providing and erecting Approved make Earth fault Relay suitable to mount with inter connection suitable to following size of moulded case circuit breaker having CT ratio & MCCB rating as following along with shunt trip 220V AC. with all internal connections & complete erected in existing M.S.housing.(2) 125 A -200 A , CT Ratio 1/200

Supplying and erecting triple pole & neutral 440V / 500V panel mounting Copper Busbars with four equal Nos. of electrolyte bus having current density not more than 1.6 Amp. / sq.mm (Rated current / cross section area) duly wrapped with colour insulating tape for phase sequence of following current carrying capacity, erected with necessary bus bar supports /insulators, main cable socket to each bar, erected in existing cubical panel with necessary connections. (B) Suitable for 200 Amp. Capacity.

Supplying and erecting triple pole & neutral 440V / 500V panel mounting Copper Busbars with four equal Nos. of electrolyte bus having current density not more than 1.6 Amp. / sq.mm (Rated current / cross section area) duly wrapped with colour insulating tape for phase sequence of following current carrying capacity, erected with necessary bus bar supports /insulators, main cable socket to each bar, erected in existing cubical panel with necessary connections. (A) Suitable for 100 Amp. Capacity

Miniature circuit breaker single pole 6A to 32A suitable to operate on 240 V A.C. system and having breaking capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark cat-III

Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box having following capacity.(B) 40 Amp.Cat.III

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having following capacity.(B) 40 Amp.Cat.III

Sheets steel powder coated enclosure suitable for incorporating One/Two nos. MCB.(Enclosure Should be used of same company of MCB or MCB DP)

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) suitable for.(A) single phase incoming and horizontal single phase outgoing.(b) sheet steel double door (IP-43). (v)16 way.(Concealed)

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) suitable for.(A) single phase incoming and horizontal single phase outgoing.(b) sheet steel double door (IP-43). (iv)12 way.(Concealed)

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) suitable for.(A) single phase incoming and horizontal single phase outgoing.(b) sheet steel double door (IP-43).(i)4 way (Concealed)

providing and erecting Approved make RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and suitable for operation on single phase 240 V,50Hz. having characteristic of quick action & tripping with all advance feature & do not incorporate any electronic component. for following Max. rating erected as directed.(ii) 40 Amps. DP.Cat.III.

Providing and erecting Approved make RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and suitable for operation on 3 phase and neutral 415V,50Hz. having characteristic of quick action & tripping with all advance feature & do not incorporate any electronic component for following Max. rating erected as directed.(iv) 100 Amps. FP (100 mA Sensitivity).Cat.III

Providing and erecting Annealed bare Copper wire 8 SWG.

Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron galvanising, Inner pipe dia of 25 mm having 200-250 Micron galvanising, connection terminal dia of 12mm with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type of applications with chamber and heavy duty cover.(approved make OEM has to submit test certificate) & having back filling compound of (B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ?/ meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2Percent(C) Back fill Compound :- Earthing compound should be capable to retain moisture for long time Necessary test report must be submitted. (a) For Electrical Installation up to 440V in normal soil,Length of pipe - 1 Mtr,Back filling compound - 1 Nos Bag of 15 Kg..

Providing & erecting weather proof, dust & vermin proof, floor mounted front operated indoor type cubical panel board necessary IP-42 and above protection as per approval from engineer incharge made from 14 SWG thick CRC M.S. sheet for outer body & doors, 16 SWG thick CRC M.S.sheet for internal partitions with necessary accesories , supporting angles/ flats channel including cutting, bending, drilling, welding, riveting with internal partitions & cable alley as per requirements & instruction of engineer-in-charge with erection of supplied switch gears, BUSBARS, suitable size of inter connecting PVC copper wire / copper-aluminium strips, rubber grommets, rib, bakelite control fuses/MCB for measuring instruments, earth bus & earth bolts, foundation flange - bolts-base Plates, sufficient nos. of hinged doors, handles with locking arrangement and rubber gasket,heavy duty end terminal connection,danger notice board,necessary ventilation,earthing strip complete. The Panel shall be painted with epoxy powder coating.(The rates excludes the cost of switchgears, bus bars, inter connecting mains & Copper Aluminium strips, meters, Fuses etc. The dimension shall be measured excluding base beams) The panel shall be supplied with following approved manufacturers with following size.(B) The standard companies switch gear shall be used and only manufacturers at CPRI approved factory .(i) with 350mm depth .

Providing , erecting , fabricating the M.S. structure as per requirement on site incorporating proper size of M.S. angles, flats, bars, channels, sections complete with cutting, welding, grinding & finishing duly painted with one coat of red oxide with erection on site as per direction of engineer in charge with necessary grouting, cementing, plastering & finishing complete.

Item Description

Providing and erecting XLPE(IS:7098)(I)-88-FRLSH ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (F) 3 1/2 core 120 Sq. mm ( 70 Sq. mm 1/2 core)

Providing and erecting XLPE (IS:7098)(I)-88-FRLSH ISI armoured cable multistrand / Solid Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables.(b) 4 core 6 Sq. mm

Providing and erecting XLPE (IS:7098)(I)-88-FRLSH ISI armoured cable multistrand / Solid Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables.(c) 4 core 10 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88-FRLSH ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables.(a) 4 core 10 Sq. mm .

Providing and erecting XLPE(IS:7098)(I)-88-FRLSH ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables.(C) 4 core 25 Sq. mm

Making trench in soft soil of suitable width of 90 cm deep for laying cable or locating the fault all over the run and back filling the same and making the surface as normal ground.

Making trench in Hard Murrum / Tar Road of suitable width of 90 cm or required depth for laying any size of cable or locating the fault all over the run and back filling the same and making the surface as normal ground.

Making trench in Hard Murrum / Tar Road of suitable width of 90 cm or required depth for laying any size of cable or locating the fault all over the run and back filling the same and making the surface as normal ground.(B) If additional machinery like hammer driller or JCB use [Add]

Supplying following size of Light duty “A” Class G.I . Pipe & erecting as directed by Engineer-in-charge. (B) 50 mm dia

Supplying following size of Light duty “A” Class G.I . Pipe & erecting as directed by Engineer-in-charge.(D) 100 mm dia.

Providing & laying approved make Double walled corrugated pipes (DWC) of polyethylene(conforming to IS 14930 II )with necessary connecting accessories of same material at required depth in existing trench for laying of cable. below ground / road surface for enclosing cable.(A)50 mm outer dia.

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables.(c) 2 to 4 core 10 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables.(E) 2 to 4 core 25 Sq. mm

Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables.(E) 3 & 1/2 core 120 Sq. mm

Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (A) 1.5/ 2.5/4/6 Sq.mm

Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner.(B) 10 Sq.mm

Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner.(E) 70 Sq.mm.

Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner.(G) 120 Sq.mm.

Solderless crimping type Copper lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (B) 10 Sq.mm

Solderless crimping type Copper lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner.(D) 25 Sq.mm.

Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan with double ball bearing ISI mark with Condenser 230 volt A.C. 50 Hz 1200 mm sweep complete having 3blades with aluminium blades with , canopy & 30 cm. down rod erected with earthing.

Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the RCC bars up to 50mm length each side and pierced through a 16 Gauge M.S. box / Heavy Duty PVC box complete erected concealed in Ceiling with necessary finishing.

Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or Fan box.

Supplying and erecting approved make Octagonal pole made from HR sheet steel. The pole should be made as per IS. and shall be coated with hot dip galvanizing as per IS 2629/2633/4759, suitable suspend local wind speed with integral Junction box consist of terminal plate of min 6mm Hylam sheet, standard profile 35mmX7.5mm Din-Rail for MCB Mounting, stud type terminal and arrangement for cable termination to be erected With Suitable foundation (Included) as per details given by manufacturer considering site requirement.(E) 7 Mtr. Long 70 mm Top X 135 mm bottom dia, 3 mm thickness with 225mmX225mmX16mm base plate, 4-M20 Bolts and 600mm long J-Bolt.Approx Pole weight 67 kg.

Supplying & erecting approved make SMC press moulded composite FRP. loop-in, loop-out approx. 2mm thick box complete with Bakelite connector strip 5way(3P+N+E),DIN rail for mounting mob & hinged doors as per requirement having locking arrangements with mounting clamp with nuts, bolts & washers suitable for erection on pole with cable clamps& earth bolt of following size of box.(C)150mm x 125mm x 100mm [deep]

Providing and erecting street light pole bracket comprising main B Class MS pipe of 4.2 cm/require outside dia. complete with suitable B Class M.S. sleeve tubing of approx. 45cms.length and suitable for 76.5 mm / 80mm. / require size pole top having sufficient fasteners for fixing the brackets and having spread of 1 mtr. length with suitable rise as per site condition & suitable welded stiffener reducer and nipple with check nut complete painted with one coat of Red oxide / PU base primer and two coats of Aluminium / PU paint. paint with following nos of arms.[B] Double Arm Bracket 1 Mtr

Providing and erecting street light pole bracket comprising main B Class MS pipe of 4.2 cm/require outside dia. complete with suitable B Class M.S. sleeve tubing of approx. 45cms.length and suitable for 76.5 mm / 80mm. / require size pole top having sufficient fasteners for fixing the brackets and having spread of 1 mtr. length with suitable rise as per site condition & suitable welded stiffener reducer and nipple with check nut complete painted with one coat of Red oxide / PU base primer and two coats of Aluminium / PU paint. paint with following nos of arms.[A] Single Arm bracket 1 Mtr

Supplying & erecting approved make Digital time switch having lithium cell 6 years operative and operate battery backup 1 channel day clock with 14 memory programme, suitable to operate on 240V + 5Percent, 16A with, floating contacts Minimum switching setup time 1 minimum & LCD display. Also comprised permanent ON/OFF switching. Programming switches & housed in fire proof thermoplastic enclosure & transparent cover erected as required with necessary connection erected as directed.

Supplying & erecting power contactor ,AC3 duty for time switch complete erected as per direction. [D] 4 pole 440V 40 Amp. Cat III

Supplying and erecting approved make panel mounting type Digital Voltmeter having 3 digits LED display, 0 to 750 AC Volts range erected on existing panel board with all connection, wiring etc .with manufacturers calibration certificate.

Supplying and erecting approved make panel mounting type Digital Ammeter having 3 digits LED display, external CT operated, calibrated for 0 to 1000 Amps suitable to operate on 500 Volt AC , erected on existing panel board with all connection, wiring etc .with manufacturers calibration certificate.

Providing & erecting L.T. Current Transformer with bar primary 50/5 to 1000/5 ratio 15 VA burden erected in existing CRCA box duly secured with insulating materials connected to the meter

Supplying and erecting approved make suitable panel indicator LED type lamp, lens cover, complete erected with necessary connections.

Providing & erecting open well horizontal mono block pump set with cast iron body, complete for three phase submersible motor having.[H] For 15 HP 3 phase open well horizontal mono block pump set suitable for 1600 LPM to 1025 LPM @ 33 to 42 MTR head suitable for 65 /80 mm dia delivery pipe.Cat.II

Supplying submersible pump set for bore of 200 mm. dia. or more having 3 phase motor capacity about 50-55 H.P discharge capacity having (A) ( 13 Stage) 100 to 400 L.P.M. discharge at the head 182 to 265 mtrs. suitable for 80 mm dia. Delivery pipe.Cat.III

Lowering of submersible motor pump set at the depth of following ,complete with required. Nos. and size of casing pipes erected by means of proper chain pulley block & pipe wrenches after checking of threads of each pipe with coupling to take the load of the pump set and pipe assembly filled up with water.(d)For Open well Horizontal submersible pump set for sump well. (ii) 7.5HP to 15 HP

Lowering of submersible motor pump set at the depth of following ,complete with required. Nos. and size of casing pipes erected by means of proper chain pulley block & pipe wrenches after checking of threads of each pipe with coupling to take the load of the pump set and pipe assembly filled up with water.(c)Above 120 mtr.

Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible Submersible copper cable approved make of following Size.(d) 3 Core x 6 Sq. mm.

Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible Submersible copper cable approved make of following Size.(J)3 Core x 35 Sq. mm

Providing Water proof straight Joint in PVC insulated flat flexible copper cable by using insulating material, water proofing material, & making the joint complete. (A) Up to 10Sq. mm

Providing Water proof straight Joint in PVC insulated flat flexible copper cable by using insulating material, water proofing material, & making the joint complete. (B) 16 to 35 Sq. mm

Supplying of following size of HEAVY UPVC column pipe with coupler and wire lock.[D] 80 mm dia.

Supply of following size of TOP & BOTTOM accessories i.e. Adaptor set (CI) long, pump guard set, starter pipe Rubber ring for submersible pump & UPVC column pipe as directed by Engineer - in - charge with necessary plumbing as desired.[F] 80 mm dia

Providing & erecting capacitor duty contactor 3 phase, 415 V with proper connection for following rating:(D) 25 KVAR

SITC of Vertical Air Termination Solid aluminium with Base- 10 mm dia and 1000 mm long. Air Termination Base tested for conditioning, Ageing Test & Lightning impulse current withstand test: 100 kA of 10/350µs waveform in an accredited Third party laboratory as per 6.3 & 6.4 of IEC 62561-1 2017 protocol with MAST 34mm dia 3000 mm long- Cold Galvanized

SITC of 8 mm dia solid Aluminium Conductor for roof top mesh grid and tested as per IEC 62561- 2 conducted in the Govt. accredited thirty party laboratory to meet the requirement of IS/IEC 62305 with Required Accessories - Aluminium Holding clamp at every 1 mtr distance, Aluminium/SS cross splicer at every crossing of Alu. conductor, Expansion piece with connectors at every 20 mtr distance, Aluminium straight Splicer to connect conductors. All Accessories should be tested as per IEC 62561-1 2018 Cl. 6.3 for conditioning & Ageing Test & 6.4 for Lightning impulse current withstand test: 100 kA of 10/350µs waveform(Ageing & Electrical test ) conducted in a sequence manner & tested in the Govt. accredited Third party laboratory to meet the requirements of IS/IEC 6230

Item Description

SITC of Galvanized Steel Flat 25x6 mm thickness from earth electrode directly in ground as required. Zinc coating: 500 g/m square (Approx:70 micron coating) tested and used exclusively for lightning protection earthing system and ring equipotential bonding.

SITC of 14.2 mm dia 3 mtr long Earth electrode of High tensile steel electrode with 250 micron copper bonding & 1 bag of Carbon fill Based environment friendly backfill tested as per IEC 62561-7 in NABL accredited Laboratory and suitable stainless Steel double sided clamp. Eco Friendly rust proof heavy duty weather proof Polyethylene Earth Pit Chamber with following dimensions :254 mm dia (top), 330 mm dia (bottom) & 260 mm (height).

SITC and fixing of ACE mortar seal for fire penetration sealing system in floor opening for veritcal shafts & wall opening FM approved class 4990.the mortar seal shall have minimum 2 Hours fire resistant and minimum thickness 100 mm.It should have been tested at CBRI roorkee with following test in sequence on same sample without any touchup or modification during the test. Fire rated Foam and PVC IntumescentWrapping systems.(1) Impact test 2.5 Kgs Hammer, (2) water absorbtion test for 24 Hours, (3) accelerated ageing for 168 Hours, (4) vibration test for 4 hours, (5) fire resistant test as per standards ASTME 814,UL-1479, IS 12458/2019, BS 476 PART 20 (Certificates of all standards are required), (6) hose stream test. Manufacturer original batch test certificate for physical properties to be submitted. (HSN Code-381600)