Loading…
Loading…
Tender Value
₹20.6 L
EMD Value
₹21,000
Closing Date
28 May 2026, 6:00 pmClosed
Similar tender results from the same govt authority in the past 3 years.
Executive Engineer, Panchayat R&B Dn. Gandhinagar
Construction of Various Gram Panchayat Office (Having Population upto 5000-ALT-1) Ta. Mansa, Dist. Gandhinagar.(1) Harnahoda Gram Panchayat.
305152
01 of 2026-27/01
Open
Civil - All
Gandhinagar
7 documents required · 7 mandatory
₹900
Executive Engineer Panchayat (R & B) Division, Gandhinagar
₹21,000
14 May 2026
14 May 2026
14 May 2026
28 May 2026
14 May 2026
Excavation for foundation upto 1.50mt.Depth including sorting out and stacking of useful materials
1 and disposing of the excavated stuff as directed with in all lead & Lift (A) Loose or Soft soil. 61.00 Cu.m 123.12
Excavation for foundation upto 1.50mt.Depth including sorting out and stacking of useful materials
2 and disposing of the excavated stuff as directed with in all lead & Lift (B) Dense or Hard soil. 23.00 Cu.m 157.16
Excavation for foundation 1.50mt. to 3.0 mt. depth including sorting out and stacking of useful
3 materials and disposing of the excavated stuff as directed with in all Lead & Lift (C) Hard Murrum 34.00 Cu.m 287.21
Filling foundation and plinth with sand under floors including watering, ramming and consolidating
4 dressing etc, comp. 17.00 Cu.m 481.70
Filling available excavated earth excluding rock in trenches plinth side of foundation etc. in layer not
exceeding 20cm. In depth consolidation each deposited layer by ramming and watering.
6 watering, ramming and consolidating etc. comp. 39.00 Cu.m 277.14
Applying general insecticide pest control treatment to floors, cupboards etc including labour materials
etc. complete. Using Imidacloprid 30.5 SCas Per IS 6313 part - II( (0.075% concentration by mass) is
7 recommended 10.5ml chemical diluted with 5 liters of water application 0.5 litre chemical /Sqm of 109.00 Sqm 91.63
surface is recommended as per I.S
Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- graded stone aggregates
20 mm nominal size) and curing complete including cost of formwork in (A) Foundation and Plinth
Providing and laying cement concret 1:1.5:3 (1 Cement : 1.5 coase sand : 3 graded stone aggregrate
20mm nominal size) and curing complete exculding cost of form work and reinforcement for
9 reinforced cement concrete work in (a) Foundation footing base of column and mass concrete 9.60 Cu.m 5043.94
Providing and laying nominal cement concrete M-200 in R.C.C. 1:1 1/2 :3 (1 cement :1 1/2 coarse
sand : 3 graded stone agregate 20 mm. Nominal size) including finishing smooth with curing complete
10 including the cost of form work but excluding the cost of reinforcement for R.C.C. work in column 4.20 Cu.m 7901.23
Upto plinth level.
Providing & laying cement concrete 1: 3 : 6 ( 1 Cement : 3 Coarse sand : 6 graded B.T stone
11 aggregate 20mm nominal size) Curing comp. including cost of form work in foundation and plinth. 13.00 Cu.m 3396.68
Providing and laying nominal cement concrete M-200 in R.C.C. 1:1 1/2 :3 (1 cement :1 1/2 coarse
sand : 3 graded stone agregate 20 mm. Nominal size) including finishing smooth with curing complete
12 including the cost of form work but excluding the cost of reinforcement for R.C.C. work in column for 6.30 Cu.m 10368.49
Providing and laying nominal cement concrete M-200 in R.C.C. 1:1 1/2 :3 (1 cement :1 1/2 coarse
sand : 3 graded stone agregate 20 mm. Nominal size) including finishing smooth with curing complete
13 including the cost of form work but excluding the cost of reinforcement for R.C.C. work (c) PLINTH 8.00 Cu.m 5751.95
Providing and laying nominal cement concrete M-200 in R.C.C. 1: 1 1/2 : 3 (1 cement :1/2 coarse
sand : 3 graded stone agregate 20 mm. Nominal size) including finishing smooth with curing complete
14 including the cost of form work but excluding the cost of reinforcement for R.C.C. work in BEAMS 7.00 Cu.m 8142.03
For All Floor.
Providing and laying nominal cement concrete M-200 in R.C.C. 1: 1 1/2 : 3 (1 cement :1/2 coarse
sand : 3 graded stone agregate 20 mm. Nominal size) including finishing smooth with curing complete
15 including the cost of form work but excluding the cost of reinforcement for R.C.C. work in LINTELS 2.10 Cu.m 7523.77
All Floor.
Providing and laying nominal cement concrete M-200 in R.C.C. 1: 1 1/2 : 3 (1 cement :1 1/2 coarse
sand : 3 graded stone agregate 20 mm. Nominal size) including finishing smooth with curing complete
16 including the cost of form work but excluding the cost of reinforcement for R.C.C. work in 2.60 Cu.m 6742.92
CHHAJJAS All Floor.
Providing and laying nominal cement concrete M-200 in R.C.C. 1: 1 1/2 : 3 (1 cement :1 1/2 coarse
sand : 3 graded stone agregate 20 mm. Nominal size) including finishing smooth with curing complete
17 including the cost of form work but excluding the cost of reinforcement for R.C.C. work in slabs for 14.80 Cu.m 6663.00
All Floor.
No Rate In
Description of Item (with brief specification and reference to book of specifications) Quantity Unit Amount
Providing and laying nominal cement concrete M-200 in R.C.C. 1: 1 1/2 : 3 (1 cement :1 1/2 coarse
sand : 3 graded stone agregate 20 mm. Nominal size) including finishing smooth with curing complete
18 including the cost of form work but excluding the cost of reinforcement for R.C.C. work in staircases 2.20 Cu.m 7446.73
for all floor
Providing T.M.T. bar FE500/500D reinforcement confirmed to for R.C.C. work including bending,
19 binding, and placing. In position comp. Up to floor two level. For All Floor 6190.00 Kg 77.29
Brick work using common burnt clay building bricks having crushing strength not less than
20 Kg./Sq.m. in foundation and plinth in cement mortar 1:6 (1 cement:6 fine sand) (b) Conventional. 14.00 Cu.m 4214.12
Brick work using common burnt clay building bricks having crushing strength not less than 35 Kg./
21 Sqm. in cement mortar 1:6 ( 1 cement : 6 Fine sand ) in super structure above plinth level upto floor 34.00 Cu.m 4499.25
two level ( for G.F ) Conventional
Half brick masonary in common burnt clay building bricks having crushing strength not less than
35kg./sq.cm. in cement mortar 1:3 (1 cement : 3 coarse sand ) with 2nos. of 6mm dia mild steel round
bars every three coarse embedded in cement mortar in superstructure for Ground floor (Conventional)
Providing and fixing door Single shutter 35 mm.thick flush door teak wood beading 75 x 35mm
including both side in situ laminate with 18mm thick granite frame 6 Lever Mortice lock , SS Aldrop
30cm long, SS Handle size 15 Cm Long, Tower Bolt size 20 cm etc. as per detail colour & pattern
approved by this office including necessary anodized alluminum fixtures and fastenings.
Providing & fixing FRP Frame size100 x 50mm and 35mm think FRP depress pannel shutter having
extra reinforcement on sides ad edges and in gel coat finish. The cores of the shutter is to be filled up
with intected fire extinguishing grade polyurethane wooden pieces for stiffening and also for taking
24 hinges and fixtures. The FRP shutter is to be water proof, weather proof, termite proof and resistance 1.60 Sqm 2377.76
to mild acid / Alkali including S.S hinges with necessary screws and alluminium fixtures and
fastenings & Fastener Sleeve.
Providing and fixing Anodized Alluminum Section Jindal Deluxe Sliding Window System C (30mm)
series sction memebers THREE track window section bottom track 20837, frame top & side
shutter frame top rail & bottom rail 20993, side rail 20553, lock rail 20550 with 5mm thick transparent
25 plain float glass, with transparent silicon sealant with allu. anosized coated fittings and fixture etc 10.80 Sqm 3325.93
Providing and fixing standared extruded of alluminium section of size 63mm x 38.10mm x 1.2mm @
Wt. 0.643 Kg/mt) with colour anodized alluminium frame for ventilation with 5 mm thick frosted
26 glass as details etc complete for Ventilation {Colour as directed by Engineer in charge except black & 0.80 Sqm 1175.56
Alluminum section and glass
Providing and fixing Safty grills of required pattern for windows 12mm dia M.S. round Bar at required
spacing M.S. Flat 25mm x 5mm thick as per design and hold fasting with coach bolts including one
27 coat of primer and Shall be Painting with Enamel Paint and Colour approved by as per site Engineer 540.00 Kgs 111.40
etc complete.
Providing and laying Machine cut, Free edges, Machine polished Granite stone slab 18 mm thick
{Single piece not more than 150 cm } for stair steps and riser as per design incl. full moulded round
front edge & 1 cm nosing & necessary groobe on trade of steps laid on 20 mm thick cement mortar
1:6 (1 -cement : 6 coarse sand ) jointed with grey cement slurry including rubbing and polishing etc.
Providing and laying 60 x 60cm Soluble Salt Vitrified tiles 8 to 10 mm thick with pattern colour &
Shade as detailed approve by architect ( 10% Dark colour tiles Pattern ) in flooring treads of steps and
29 landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand) finishing with flush 80.00 Sqm 1120.36
pointing in white cement.
Providing and laying 60 x 60cm Soluble salt Vitrified tiles 8 to 10 mm thick with pattern colour &
Shade as detailed approve by architect ( 10% Dark colour tiles Pattern ) in skrting risers of steps and
30 dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with white cement 6.10 Sqm 1114.09
Providing and laying 30cm x 30cm in size Ceramic tiles 6mm thick in flooring treads of steps and
31 landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush 3.00 Sqm 1017.30
pointing in white cement
Providing and laying 30 x 60Cm size premium printed glazed tiles 6mm thick in skrting risers of steps
and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with white cement Sqm
Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete block 60mm thick with
grade of concrete M300 pnumatic compressed / vibrated mechanically and as per approved design
33 Confirming to IS 15658 : 2006 including 35 mm Sand layer for levelling and filling the joint with sand 14.00 Sqm 706.90
in proper line and level as per guidlines of IRC : SP 63-2018 etc. Complete
No Rate In
Description of Item (with brief specification and reference to book of specifications) Quantity Unit Amount
Providing and laying water proofing tretment with chaina mosaic tiles flooring bedding for
maintaining slope for plain and curve surface & 12 mm to 20 mm of broken piece of ceramic / glazed
tiles ( one or more color as directed ) to be laid over cement mortar bedding of C M 1:3 (1 cement :
sand ) containg one Kg. of water profing materials per bag of O P C at plain or / and slops and to be
tempered to bring mortar ceramic up to surface with using white cement and colour pigment including
34 rounding of junctions and extending them up to 15 cm along the wall and curing with bends any 100.00 Sqm 779.70
pattens or design as per drawing and cleaning by using oxalic acid etc complete.
Providing and laying Mirror polished Machine polished Grenite stone slab 18mm thick for doors &
windows sill & Jams clading as per design including full moulded round front steps & 1cm nosing &
necessary groove on trads of steps ;laid on 20mm thick cement mortar 1:6 ( 1 cement : 6 coarse sand )
35 jointed with gray cement sluury including rubbing and polsihing etc. complete.for Doors / windows sill 14.00 Sqm 3395.62
& jams clading.
Providing 20 mm thick double coat mala cement plaster on interior brick / concrete work for plastering
comprising of base coat of 12 mm thick cement plaster in cement mortar (1 Cement : 4 coarse sand) in
rough finishing and 8 mm thick top coat of cement mortar 1:2 (1 Cement : 2 Coarse sand) finished
with trovel including scaffolding curing etc. complete. For Ground Floor
Providing 10mm thick cement plaster in single coat on brick/concrete walls for interior plastering upto
floor two level and finished even and smooth in (i) Cement mortar 1:3 (1-cement:3-sand) including
37 finishing with a flating coat of neat cement slurry etc. complete. for Ground Floor 98.00 Sqm 211.98
Providing and fixing chiken mesh jali with square of 12.50 x 12.50 mm of 25 gauge at junction the
Brick.masonary and reinforcement cement concrete member including fixing materials scaffolding
labour etc. complete
Applying two coats of putty & two coats of primer of approved brand and manufacture on new wall
surface to give an even shade including thoroughly brushing the surface free from mortar dropping and
39 other foreign matter and sand papered smooth. 341.00 Sqm 40.59
Wall painting one coats of primer of approved brand (Two coats) plastic emulsion paint of approved
brand and manufacture on undecorated wall surface to give an even shade including throughly
40 brushing the surface free from mortar droppings and other foreign matter and sand papered smooth. 243.00 Sqm 83.18
Wall painting one coats of primer of approved brand & ( Two coats) with plastic emulsion paint of
approved brand and manufacture on undecorated ceiling surface to give an even shade including
41 throughly brushing the surface free from mortar droppings and other foreign matter and sand papered 98.00 Sqm 88.87
20mm thick sand faced cement plaster on walls upto height 10 metres above ground level consisting
of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1
42 (1-cement : 1-sand) with 1cm x 1cm groovs as per pattern sample approved by the engineer incharge 177.00 Sqm 315.69
etc. complete.
Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water
including fittings as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of
clamp at every two metre C/C or shall be concelled as directed including necessary fittings etc.
43 including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all 5.00 Rmt 72.65
materials.
Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water
including fittings as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of
clamp at every two metre C/C or shall be concelled as directed including necessary fittings etc.
44 including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all 11.00 Rmt 91.84
materials. [B] 25mm dia.
Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water
including fittings as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of
clamp at every two metre C/C or shall be concelled as directed including necessary fittings etc.
45 including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all 8.00 Rmt 148.12
materials.[D] 40 mm.
Providing and fixing uPVC Heavy Duty Handle valve of aprroved brand and Quality with required
fitting and adhesive incl. fixing the same with new pipe line as directed by engineer in charge. (C) Nos
25mm dia.,
Providing and fixing uPVC Heavy Duty Handle valve of aprroved brand and Quality with required
fitting and adhesive incl. fixing the same with new pipe line as directed by engineer in charge. (C)
40mm dia.,
No Rate In
Description of Item (with brief specification and reference to book of specifications) Quantity Unit Amount
Providing, laying and jointing in true line and level 75 diametre U.P.V.C (Type B) conforming to IS
13592-1992 with one end plain and other end socketed with rubber ring, & fittings conforming to ISI
14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other
with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 110 mm diametre x
149 mm length x 145 mm heigh at every 2000 mm center to center or shall be concealed in walls as
directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and
jointed with adhesive solvent cement including cost of all materials.
Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure poluthene pipes of the
following outside Dia. Low densidy, complete with special flange compression type fittings, wall
clipsetc. including making good the wall ceiling and floor.(A) 110mm dia.
Providing, laying and jointing in true line and level 110 diametre U.P.V.C (Type B) conforming to IS
13592-1992 with one end plain and other end socketed with rubber ring, & fittings conforming to ISI
14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other
with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 110 mm diametre x
50 149 mm length x 145 mm heigh at every 2000 mm center to center or shall be concealed in walls as 14.00 Rmt 876.90
directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and
jointed with adhesive solvent cement including cost of all materials.
Providing, laying and jointing in true line and level 160 diametre U.P.V.C (Type B) conforming to IS
13592-1992 with one end plain and other end socketed with rubber ring, & fittings conforming to ISI
14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other
with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 160 mm diametre x
51 210 mm length x 196 mm heigh at every 2000 mm center to center or shall be concealed in walls as 5.00 Rmt 834.38
directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and
jointed with adhesive solvent cement including cost of all materials.
Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter with jali of the
following nominal diameter of self cleansing design with C.I scread down or hinged grating including
the cost of cutting and making good the walls.
Providing and fixing screw down quarter turn heavy duty bib taps of following size (A) Brass
53 chromium plated screw down bib tap (i) 15mm dia. ( Plumber, Mark, Escco or equivalent brand ) 2.00 Nos 186.83
Providing and fixing CP brass Quarter turn pillar tap, capstan head screw down high pressure with
screw, shanks and back nuts (A) 15 mm dia {Jaquar< Plumber, Mark Long pipe or equivalent brand}
Providing and fixing wash basin with pedestal of std. Height with single hole for pillar tap with C.I or
M.S brackets painted white including cutting cutting holes and making good the same including C.P.
55 brass waste and waste pipes and bottal trap (A) Vitreous China: (ii) Flat Back washbasin 550 mm x 1.00 Nos 1849.31
400mm size.In colour.
Pro. & Fix. wash down water closet (anglo indian W.C pan of Vitreous china Patern.) with integral" p
" or " s " trap and PVC flushing cistern with a pair of C.L.I. Or Mild steel Brackets, complete with
fittings such as lead value siphon, 15 mm. Nominal size brass ball valve with polythene float, C.P.
Brass handle unions and couplings for connections with inlet, outlet and over flow pipes, 40 mm. dia.
56 flush bend including cutting holes in walls and making good the same connecting the flush bend with 1.00 Nos 3223.92
cistern and closet etc comp incl plastic sheet cover including jointing trap with pipe in cm 1:1 (a )
Vitreous china in white or color
Providing erecting and fixing double coated 4-layer tough virgin plast ISI water tank of required
57 capacity each with all necessary fittings and connection etc. complete on terrace. 1000.00 Litre 10.61
Providing and fixing 600mm x 450mm bevelled edge mirrror of superior glass mounted on 6mm thick
58 A.C. sheet or plywood sheet and fixing to wooden pluge with C.P. brass screws and washers. 1.00 No 859.41
Providing and fixing C.P. brass towel rail comlete with C.P. brass brackets fixed to wooden plugs with
59 C.P. brass scews.(B) 600mm x 20mm size. 1.00 No 616.42
Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and water tight C.I.
cover with frame of 300mm x 300mm size (inside) with standard weight.(i) Square mouth traps.(B)
150mm x 100mm size P of R type
Providing and fixing CP brass screw down stop cock of approved quality 15mm size with adjustable
61 wall flange..or as per instrction of engineer incharge. 2.00 No 205.83
No Rate In
Description of Item (with brief specification and reference to book of specifications) Quantity Unit Amount
Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with briocks
having croshing strength not less than 35Kg. Cm2 in C.M. 1:5 C.I. cover with frame (Light duty)
455mm x 610mm intenal dimensions, total weight of cover with frame to be not less than 38Kg. (Wt.
of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand
:4-graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with
cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete etc.
complete.(i) Inside dimensions 455mmx 610mm and 450mm deep for single pipe line.
Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with briocks
having croshing strength not less than 35Kg. Cm2 in C.M. 1:5 C.I. cover with frame (Light duty)
455mm x 610mm intenal dimensions total weight of cover with frame to be not less than 38Kg. (Wt.
of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand
63 :4-graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with 1.00 No 3660.76
cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete etc.
complete.(ii) Inside dimensions 500mm x 700 mm and 450mm deep for pipe line with one or two
Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an
required shape even shade after thoroughly brushing the surface to remove all dirt, and remains of
64 loose powdered materials.etc complete 177.00 Sqm 120.26
Providing thoruting or plaster drip and moulding to R.C.C. chhajja.
Constructing Septic Tank of size 2.5 x 1.5 external and 1.50mt. depth with necessary excavation,
brick masonary, RCC slab including joint PVC pipe and filling the trenches etc. comp.
Providing sock pit of 5.00 Cu.M. Volume including excavating and filling brickbats with dry masonry
work at top for 45cm. height including covering the top with stone including providing vatas in C.M.
67 1:3 with finishing curing etc. complete as directed. 1.00 No 3303.53
Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI
marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length , in below
type of pipe erected with 6A Modular type switch / bell push & accessories and earth continuity of
following type, erected on PVC / Metallic/ Wooden box, single mounting base frame covered with
68 extured/ metallic/ white front plate modules erected on / in wall / ceiling as per pipe erected, with 10.00 Pt. 419.15
necessary Lamp holder/ceiling rose / H.D.Connector as directed.
(a) with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling complete
Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of .ISI marked
1.1 KV Grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in below type of
pipe erected with 6A Modular type switch and hum free EME step type electronic fan regulator
mounted and accessories with earth continuity of following type erected on PVC / Metallic/Wooden
69 box, single mounting base frame covered with textured/metallic/white front plate modules erected on / 4.00 Pt. 598.93
in wall / ceiling as per pipe erected. with necessary ceiling rose / H.D.Connector as directed. (a) with
medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling complete
Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked
KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in below type of pipe
erected complete with Modular type switch & 5 pin Plug erected on PVC / Metallic/Wooden box
covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with
following type of accessories. [I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby
70 switchboard/mcb db board 2.00 Pt. 445.41
(a) with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling complete
Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC /
Metallic/Wooden box, single mounting base frame covered with textured / metallic/white front plate
71 modules erected on / in wall / ceiling with following type accessories , Cat. III. 2.00 Pt. 241.39
Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be
erected on/in wall or ceiling erected with necessary PVC fittings & Junction boxes fixed with
adhesive solution & Clamps with following dia of pipes, in approved manner as directed
72 80.00 Meter 23.23
Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper
conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with
sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of
73 50.00 Meter 78.78
following size (A) With medium class Rigid PVC pipe and accessories. (b) 2 wire 2.5 sq. mm
No Rate In
Description of Item (with brief specification and reference to book of specifications) Quantity Unit Amount
Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper
conductor wire in following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper
74 conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size 30.00 Meter 107.06
(A) with medium class Rigid PVC pipe and accessories (a) 2 wire 4 sq. mm
Providing & erecting Sheet Steel Powder Coated MCB Distribution Board Flush/Surface Mounted
Fitted With Busbar Netural Link Earth Bar and Din Rail Confirming to BS: 5486-1986 without MCB
75 to House Appropriate Nos of MCBs. 1.00 Each 326.23
(F) Single Phase 8 Way Double Door CAT-III
Providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate on 240 V
A.C. system and having breaking capacity 10 KA to be erected in existing box. confirming to IS
76 8828/1996 with ISI Mark (A) 6 to 32 Amp. CAT-III 2.00 Each 299.97
PROVIDING AND ERECTING DOUBLE POLE MCB ISOLATOR A.C.22 DUTY CONFIRMS TO
IS13947-3 240V 40 IN EXISTING BOX. CAT-III Each
Approved Make ELCBs/RCCBs Conforming to IS12640 and Having Sesitivity of 30Ma and Short
Circuit Withstand Capacity of 6KA and Suitable for Operation on Single Phase 240V Having
Characteristic of Quick Action & Tripping with All Advance Feature & Do not Incorporate any
electronic component for Following Max Rating Erected as Directed (ii) 40AMPS.DP CAT-III
Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on
single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS:
513/CRCA/ aluminium die cast powder coated and high U.V. & corrosion resistance with diffuser
with company mark/name 160V to 270V, Power Factor more than 0.95, THD < 15%,
CCT 3000 K to 6500K,
Luminaire efficacy> 85 lumens/watt ,LED
79 LED driver efficiency > 85 % 6.00 Each 373.70
( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of
ranges shown.) (A) Tube Light with integral driver (iv) 22-24 Watts, Surge - 2KV,IP-20, conventional
Supplying and erecting led lamps with following wattage capacity of 220 to 240 voltage, minimum
15000 burning hours life, 500 V in built-surge protection,Polycarbonate diffuser, mounting suitable
80 for E14 / E27 / B22 lamp holders, pf >= 0.5 (ii) 5 to 8 watts 2.00 Each 112.11
Providing and erecting Approved make Ceiling fan with double ball bearing ISI mark with condenser
A.C. 23OV.50 c/s.1200 mm. sweep complete, canopy erected on existing hook or clamp with earthing.
[Make shall be approved by Engineer in charge]
Providing & erecting Switch board for Computer or electric apparatus consisting of following
modular type accessories mounted with PVC / Metallic concealed/open box with single mounting
base frame covered with textured/metallic /white front plate,modules erected with necessary
connections as directed
82 1 no. 6A/16A universal plug-switch combined. 2.00 Each 1081.71
3 nos. 6A Switch
3 nos. 6A 5 pin Plug For Modular Type Accessories
Decorative call bell Ting-tong box type 250 volts complete erected
Providing and erecting Pipe type earthing with 40 mm dia 2.5 mtr long 'B' grade G.I. pipe with
84 necessary coupling buch buried in specially prepared earth pit & G.I. earth wire of 8 SWG erected & 1.00 Each 823.15
connected as directed (For panel)
For using salt and charcoal / coke as required for pipe type earthing.
Excavation for foundation up to 1.50M. to 3.0 mt. Depth including sorting out and stacking of useful
86 materials and disposing of the excavated stuff up to 50M. Lead (B) Dense or hard soil 1.00 Cu.m 157.16
Providing and laying in foundation cement concrete 1:4:8 (1 cement : 4 coarse sand :8 graded stone
aggregate 40mm nominal size) and curing complete excluding cost of form work in :(a) Foundation
Providing and laying controlled cement concrete M-200 and curing complete including the cost of
88 form work but excluding the cost of reinforcement for reinforced concrete work in Wall caps/Copping 1.00 Cu.m 5558.03
Ground Floor
Providing T.M.T. bar ( Thermo Mechanically treated Bars) reinforcement confirmed to IS-1786
89 Fe415 for R.C.C. work including bending, binding, and placing. In position comp. Up to floor two 170.00 Kg 77.29
level. For Ground Floor
Providing and laying white glazed tiles 6mm thick in flooring treads of steps and landing laid on a bed
90 of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush pointing in white 2.00 Sqm 955.41
No Rate In
Description of Item (with brief specification and reference to book of specifications) Quantity Unit Amount
Providing and laying white glazed tiles 6mm thick in skrting risers of steps and dedo on 10mm thick
91 cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with white cement slurry 6.00 Sqm 1030.57
Providing cement vata (10cm. x 10 cm. size) quarter round in cement mortar 1:1 including neat
92 cement finishing, watering etc. complete. 5.00 Rmt 24.28
Providing 20 mm thick Water proof cement plaster for sunk in single coat on bricks/ concrete wall
for interior plastering upto floor two level finished even and smooth (ii) Cement mortar 1:3 (1-
93 cement : 3-sand) and mixing waterproofing materials of approved brand and manufacture in cement 6.00 Sqm 191.70
mortar in proportion recommended by the manufacturer for All Floors.
Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. size having weight not less than 35Kg.
Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water
including fittings make as approved by Engineer In Charge. Pipe shall be fixed on the wall with the
help of clamp at every two metre C/C or shall be concelled as directed including necessary fittings etc.
including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all
materials.[E] 50 mm.
Providing and fixing S.S Butterfly valve of IS aprroved brand (C) 50mm dia.,
Total Tender amount
Rupees Twenty Lakh Sixty Thousand Five Hundred Eighty Eight And Paise Ninety Two Only
I/am we/are willing to carry out the work at _____% above /below _____________ percent (should be written in figures and words) of the estimated rates mentioned above. Amount of
my/our tender works out as under.
* Estimated amount put to tender
Deduct :_____ % Below Rs.________________ Add :_____ % Above Rs.________________
Net Rs. ______________________ Total Rs. ______________________
In words ___________________________ In words __________________________
1. The Contractor Shall Exhibit a board with deatiled specification and details of work as directed by the Engineer-In-Charge for which no Extra Payment shall be made.
2. The labour crss will be deducted as per prevaling Rules i.e 1% of the work done.
3. GST and Income tax TDS will be deducted at a Source while making Payments of bills.
4. In all RCC items in Rate Analysis Standard cement Consuption has been taken as per Govt.G.R: PRC -10/2017 cement consumption/16/c, Date: 11/05/2017 as stated i. S.O.R therefore
in RCC Items where there is a changed as per actual mix design the cost of diffrence of cement consumption have been deduvted from the rate of orignal item at the rate of input rate
mentioned in all the tender.
Above all items of " Schedule-B" with iem Description,Unit,Rate & Amount Have verified by me and found Order.
Deputy Executive Engineer Executive Engineer
R P Sub Division R & B (Pan) Division
Gandhinagar Gandhinagar
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
005.POL.pdf
004.BOQ.pdf
008.Testing Shedule.pdf
001.SBD Book - Harnahoda.pdf
006.specification-Harnahoda.pdf
007.specification ele.pdf
003.GR Building.pdf
002.SBD GR All Pdf.pdf
Download all tender documents and submit your bid