Loading…
Loading…
Tender Value
₹5.9 L
EMD Value
₹11,720
Closing Date
27 Aug 2026, 4:00 pmDue today
Executive Engineer PHE Division Sopore
Executive Engineer PHE Division Sopore
Plugging leakage in the 700mm dia pipeline of WSS Sopore under CDF of Honble MLA Sopore for the year 2026-27
2026_PHE_319924_1
ENIT No. 10/PHE/SPR of 08/2026 dated 07-08-2026
Open Tender
Civil Works
Percentage
30 days
Sopore
Please refer Tender documents.
2 documents required · 2 mandatory
₹500
Yes
Executive Engineer PHE Division Sopore
₹11,720
7 Aug 2026
7 Aug 2026
29 Aug 2026
7 Aug 2026
27 Aug 2026
7 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Fabrication, providing, and fitting 750mm diameter Mild Steel (MS) pipe 7.67 meters length. The work includes Fabrication of pipe section, Proper welding finishing& Making collars at both ends of the pipe to ensure proper Jointing with the existing Ductile Iron (D1) Pipeline [The scope of work further includes fabrication of bends to adjust alignment and make the supply main accurate as per site requirements, All necessary welding, grinding, Cutting, finishing, and alignment! Works are to be carried out using standard. Procedures With the aid of suitable tools and tackles. The job also all consumables such as welding electrodes (CI electrodes), gas, DG set hire charges, cutting tools, cranes, rubber insertions, spun yarn, Excavator skilled & unskilled labor. The contractor shall arrange for safe handling, transportation, and installation of the fabricated pipe at site, including proper fitting, testing, and ensuring leak-proof joints with the adjoining Di pipeline. The job includes earthwork excavation, refilling of trenches & dewatering during execution & dismantling of existing pipe to compete The payment for the same shall be made only after successful testing & commissioning of the job. | 1,451.37 | kg | 225 | ₹3,26,558.25 |
| 2 | Rectification of 700 mm dia Di supply main by Cl welding at site, providing 12-inch strip at joint, welding three times around joint, excavation, refilling and dewatering. All necessary welding. grinding, Cutting, finishing, and alignment! Works are to be carried out using standard.Procedures With the aid of suitable tools and tackles. The job also all consumables such as welding electrodes (Cl electrodes), gas, DG set hire charges, cutting tools, cranes, rubber insertions, spun yarn, Excavator,skilled & unskilled labor. The contractor shall arrange for safe handling, transportation, and installation of the fabricated pipe at site, including proper fitting, testing, and ensuring leak-proof joints with the adjoining DI pipeline. The job includes earthwork excavation, refilling of trenches & dewatering during execution & dismantling of existing pipe to compete. The payment for the same shall be made only after successful testing & commissioning of the job.Complete job. | 1,151.3 | kg | 225 | ₹2,59,042.5 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.79 MB
BOQ_1061563.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].